DOCUMENTATION. The new XALIS 9000 integrates a 32 bits microprocessor offering some more of performance.

Transcription

1 DOCUMENTATION The new integrates a 32 bits microprocessor offering some more of performance. XALIS is a new digital indicator range with 2 colors numerical and alphanumerical display designed to provide display and signals transmission solutions XALIS disign allows exceptional performances in a fitted 48 X 96 X 85 mm case with unplugged connections and USB plug on rear panel. XALIS can be programmed with the new graphic software IXLOG XALIS* JM Concept 18, chemin des Tard-Venus - BP Brignais - France Tel : 33 (0) Fax : 33 (0) jmc@jmconcept.com 1

2 THE RANGE OUPUTS COM Current Voltage PT 100 / Potentiometer Thermocouple Sensor supply 1 isolated analogue 2 isolated analogues 2 Relays 4 Relays RS485 USB U0 U1 XALIS 9200U0 XALIS 9200U1 XALIS 9400U1 XALIS 9400U2 VUE COMMENTEE 2 colors digitals display 5 digit 18 mm Physical units 2 colors display Menu key Scrolling keys Enter key 2 colors alphanumeric Display 9 digits 8mm Alarm status display DIMENSIONS 48 mm x 96 mm x 85 mm Documentation : 2

3 FUNCTIONS 1/2 CURRENT (dc) VOLTAGE (dc) Standard scales : 0-1mA; 0-10mA; 4-20mA; /-1mA; /-10mA; /-20mA Adjustable scale : From -22mA to 22mA Standard scales : 0-100mV; 0-1V; 0-5V; 1-5V; 0-10V; 2-10V; 0-50V; 0-100V; 0-250V; 0-500V; V /- 100mV; /-1V; /-5V; /-10V /-50V ; /-100V ; /-250V; /-500V; /-1000V Adjustable scales : From 110mV to 110V, From -2V to 11V, From -1000V to 1000V RTD 2 WIRES RESISTOR THERMOCOUPLE POTENTIOMETER SENSOR POWER SUPPLY PT10 ; PT1000 ; Ni100 ; Ni or 3 wires PT100 or 4 wires - C50, Cu53, Cu100 1KΩ - 5KΩ - 10KΩ- 50K Allows the realization of curve PTC and NTC J, K, T, B, R, S, E, NiMo, N, W3/C, W5/D, P From 470Ω to 100KΩ Sensor 2 ou 3 wires 24V - 26mA max OUTPUTS ANALOGUE OUTPUT U1 - XALIS 9200U1 - XALIS 9400U1 - XALIS 9400U2 CURRENT VOLTAGE 2 RELAYS OUTPUTS FONCTIONS 1/2 4 RELAYS OUTPUTS Standard scales : 0-10mA; 0-20mA ; 4-20mA Adjustable scales : From 0mA to 22mA Standard scales: 0-10V ; 0-5V ; 1-5V ; 2-10V Adjustable scales : From 0 to 11V XALIS 9200U0 - XALIS 9200U1 2 Relays 1 NO & 1 NC - 2A -250Vac XALIS 9400U1 - XALIS 9400U2 4 Relays 1 NO & 1 NC - 2A -250Vac DISPLAY DISPLAY COLOR COLOR DISPLAY CHANGE SCALE FACTOR colors numerical and alphanumerical display Color choice green or red separetely on digital or alphanumerical display Automatic color change possibility in case of alarm Allows to provide a magnifying effect on input in manual or automatic calibration DISPLAY OUTPUTS DISPLAY The indicator enables to display, the inputs in physical or programmed value. The indicator enables to display outputs, in physical value or in percent, it also displays alarms status. PROGRAMMATION Documentation : Programmation with 4 keys on front face and with USB plug on rear panel with free software IXLOG XALIS* 3

4 FUNCTIONS 2/2 TARE SIMULATION OUTPUT LIMITS CJC SENSOR SAFETY 100 POINTS LINEARIZATION PTC - NTC RESISTIVE RACINE CARREE LINEARIZATION THRESHOLDS ALARMS RESET Tare setting on mv and ma input Simulation function allows action concerning analogue output, relays and display separately from input and without disconnecting input or ouptut. Allows outputs limitation values High and low limits. Cold Junction Compensation with 16Bits digital sensor Shows sensor break on display, on analog output (by entering drop out value), on relays and digital output. Linearization allows to create an output function by input signal segmentation Allows to create the curve PTC or NTC by segmentation of input signal (only with software IXLOG-XALIS* ) La sortie est la racine carrée de l entrée Simple mode or band-mode with positive or negative safety. Threshold, hysteresis and temporization adjustment (separetely from rise or fall). Direct access to thresholds. Alarm memorizing and alarm deleting. Separately on each alarm ALARMS MEMORIZATION Separately on each alarm. OTHERS Cut Off ; Resolution ; Comma ; Filtering ; Display light off. TECHNICAL CHARACTERISTICS 1/2 IMPEDANCE Current input Voltage<10V thermocouple input Voltage input -/10V or >10V PT10; PT100; Ni100; Cu50; Cu53; Cu100 input Ni1000; PT1000 input 2 wires resistor R=200Ω; R=1kΩ Current: 1mA 2 wires resistor R=10kΩ Current: 0,2mA CHARACTERISTICS Analogue input/digital conversion OUTPUT IMPEDANCE RACINE CARREE La sortie est la racine carrée de l entrée Digital output/analogue conversion Current output < 950Ω Response time mv, ma, Voltage output > 4,7kΩ thermoc., 2 wires resistor Sensor power supply U < 24V - I < 36mA Response time RTD, potetiom. Thermal drift RELAY OUTPUTS Relays 1 NO&1NC : 2A-250Vac Current output residual ripple Voltage output residual ripple PRECISION CLASS 5,6Ω >10 MΩ = 6 MΩ Current: 1mA Current: 0,25mA 0.10 ISOLATION Supply / Input Supply / Output Input / Analogue output Input / Digital output Ana. output / Digital output CONSUMPTION 24 bits 16 bits < 100ms < 250ms < 25ppm < 20μA < 10mV < 4VA Documentation : 4

5 CARACTERISTIQUES TECHNIQUES 2/2 SUPPLY Standard supply input supply input in option 20Vdc - 240Vdc 80Vac - 256Vac Hz 20Vac -60Vac OTHERS Protection index Case IP65 ABS Noir Auto extinguible UL V0 TEMPERATURE Option Tropicalization Operating temperature -10 C 60 C Storage temperature -25 C 80 C CABLAGE Entrée courant Entrée capteur 2 fils Entrée Tension Current Input 2 wires sensor Input 3 wires sensor Input Voltage Input /- 10V HT Entrée capteur 3 fils Potentiomètre Thermocouple R 2fils RTD 3 fils Potentiometer R 2 wires RTD 3 wires RTD 4 fils RTD 4 wires OUTPUTS XALIS 9400U XALIS 9400U I or U Out Relais 3 / Relay 3 Relais 4 / Relay 4 Relais 3 / Relay 3 Relais 4 / Relay XALIS 9200U1 XALIS 9200U U Alimentation / Supply sans polarité / without polarity 20Vdc Vdc Vac Vac Hz Communication RS485 MODBUS 9 10 Sortie face arrière / Out rear face USB Documentation : 5