GHz Low-Noise Amplifier SST12LN01
|
|
- Gervase Jefferson
- 6 years ago
- Views:
Transcription
1 FEATURES: SSTL APPLICATIONS: Suitable Gain: Typically 4 db gain across.4. GHz Low-Noise Figure: Typically. db across.4. GHz IIP: >dbm across.4. GHz Low-Current Consumption - ma across.4. GHz Ω Input/Output Matched Packages available 6-contact UQFN mm x.6 mm All non-pb (lead-free) devices are RoHS compliant WLAN Bluetooth Wireless Network PRODUCT DESCRIPTION The is a cost effective Low-Noise Amplifier (LNA) which requires no external RF-matching components. This device is based on the.m GaAs PHEMT technology, and complies with 8. b/g applications. provides high-performance, low-noise, and moderate-gain operation within the.4. GHz frequency band. Across this frequency band, the LNA typically provides 4 db gain and. db noise figure. This LNA cell is designed with a self DC-biasing scheme, which maintains low DC current consumption, nominally at ma, during operation. Optimum performance is achieved with only a single power supply, and no external bias resistors or networks are required. The input and output ports are single-ended Ω matched. RF ports are also DC isolated requiring no DC blocking capacitors or matching components. The is offered in a 6-contact UQFN package. See Figure for pin assignments and Table for pin descriptions. 9 Silicon Storage Technology, Inc. S79-- / The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc. These specifications are subject to change without notice.
2 FUNCTIONAL BLOCKS 6 LNA 4 9 F. : Functional Block Diagram
3 PIN ASSIGNMENTS Top View (contacts facing down) V DD NC 6 RF IN RF and DC GND 4 RF OUT NC NC 9 6-uqfn P. : Pin Assignments for 6-contact UQFN PIN DESCRIPTIONS TABLE : Pin Description Symbol Pin No. Pin Name Type Function GND Ground NC No Connection Unconnected pin RFIN I.4G RF input NC No Connection Unconnected pin NC 4 No Connection Unconnected pin RFOUT O.4G RF output VDD 6 Power Supply PWR. I=Input, O=Output T. 9
4 ELECTRICAL SPECIFICATIONS The AC and DC specifications for the power amplifier interface signals. Refer to Table for the DC voltage and current specifications. Refer to Figure for the RF performance. Absolute Maximum Stress Ratings (Applied conditions greater than those listed under Absolute Maximum Stress Ratings may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions or conditions greater than those defined in the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.) Input power to pin (P IN )...Bm Average output power (P OUT )...9dBm Supply Voltage at pin 6 (V DD )...-.V to +4.6V DC supply current (I CC )...4mA Operating Temperature (T A )... -4ºC to +8ºC Storage Temperature (T STG )... -4ºC to +ºC Maximum Junction Temperature (T J )... +ºC Surface Mount Solder Reflow Temperature....6 C for seconds. Never measure with CW source. Pulsed single-tone source with <% duty cycle is recommended. Exceeding the maximum rating of average output power could cause permanent damage to the device. Operating Range Range Ambient Temp V CC Extended - to +8ºC.9.V TABLE : DC Electrical Characteristics Symbol Parameter Min. Typ Max. Unit V CC Supply Voltage at pin 6. V I CC Supply Current.4. GHz ma T. 9 TABLE : AC Electrical Characteristics for Configuration Symbol Parameter Min. Typ Max. Unit F L-U Frequency range 4 MHz G Small signal gain,.4. GHz 4 db NF Noise Figure,.4. GHz. db IIP.4. GHz dbm T. 9 4
5 TYPICAL PERFORMANCE CHARACTERISTICS Test Conditions: V DDL =.V, T A = C, unless otherwise specified S (db) S verus Frequency S (db) S verus Frequency S verus Frequency S verus Frequency S (db) S (db) sparm. : S-Parameters
6 Noise Figure versus Frequency. Room Temp 8 Degree C - Degree C Noise Figure (db) F4. 4: Noise Figure versus Frequency Gain (db) - - Room temp Temp = 8 degree Temp = - degree 4 9 F7. : Frequency Response of Gain (S) for three Temperatures 6
7 IPdB versus Frequency - - VDD =.V VDD =.V VDD =.6V - -4 IPdB F. 6: Input PdB versus Frequency 7
8 IIP versus Frequency 9 8 VDD =.V VDD =.V VDD =.6V 7 IIP (dbm) Frequency(GHz) 9 F6. 7: Input IP versus Frequency V DD. F RF IN 6 Ω DC Block DC Block Ω RF OUT 4 9 app circui t-. 8: Typical Application Circuit 8
9 PRODUCT ORDERING INFORMATION SSTLN - QU6 F SSTXXLN XX - XXX X Environmental Attribute F = non-pb contact (lead) finish Package Modifier 6 = 6 contact Package Type QU = UQFN Product Family Identifier Product Type N = Low-Noise Amplifier Voltage L =.-.6V Frequency of Operation =.4 GHz Product Line = SST Communications. Environmental suffix F denotes non-pb solder. SST non-pb solder devices are RoHS Compliant. Valid combinations for -QU6F Evaluation Kits -QU6F-K Note: Valid combinations are those products in mass production or will be in mass production. Consult your SST sales representative to confirm availability of valid combinations and to determine availability of new combinations. 9
10 PACKAGING DIAGRAMS TOP VIEW SIDE VIEW BOTTOM VIEW..47 See paddle details Pin Max Note:. Although many dimensions are simliar to those of JEDEC JEP9 MO-I, this specific package is not registered.. The external paddle is electrically connected to the die back-side and possibly to certain V SS leads. This paddle can be soldered to the PC board it is suggested to connect this paddle to the V SS of the unit. Connection of this paddle to any other voltage potential can result in shorts and/or electrical malfunction of the device.. Untoleranced dimensions are nominal target dimensions. 4. All linear dimensions are in millimeters (max/min)... BSC..4 Exposed Paddle Detail. See note mm 6-uqfn-x.6-QU6-. 9: 6-contact Ultra-thin Quad Flat No-lead (UQFN) SST Package Code: QU6
11 TABLE 4: Revision History Revision Description Date Initial release of data sheet Sep 6 Updated Features: on page Sep 7 Revised Product Description on page Jun 8 Change Suitable Gain to 4 db globally Changed low-noise figure. db globally Changes low-current consumption to - ma Edited Table, DC Electrical Characteristics and Table, AC Electrical Characteristics on page Replaced Figures through 7, pages through 8 Edited Figure 8, page 8 Added Figure on page 8 Updated on page Feb 9 4 Updated document status from Preliminary Specifications to Dec 9 Revised IIPE values in Features on page and Table on page 4 Nov Changed definition of F environmental attribute in Product Ordering Information on page 9 Silicon Storage Technology, Inc or
GHz Low-Noise Amplifier SST12LN01
FEATURES: SST2L APPLICATIONS: Suitable Gain: Typically 4 db gain across 2.4 2.5 GHz Low-Noise Figure: Typically.55 db across 2.4 2.5 GHz IIP3: >dbm across 2.4 2.5 GHz Low-Current Consumption -2 ma across
More information2.4 GHz Front-End Module SST12LF01
FEATURES: Gain: Typically 12 db gain across 2.4 2.5 GHz for Receiver (RX) chain. Typically 29 db gain across 2.4 2.5 GHz over temperature C to +8 C for Transmitter (TX) chain. Low-Noise Figure Typical
More information2.4 GHz High-Power, High-Gain Power Amplifier SST12LP14A
is a versatile power amplifier based on the highly-reliable InGaP/ GaAs HBT technology. Easily configured for high-power applications with good power-added efficiency while operating over the 2.4-2.5 GHz
More information2.4 GHz High-Power, High-Gain Power Amplifier SST12LP07
The is a versatile power amplifier based on the highly-reliable InGaP/ GaAs HBT technology. Easily configured for high-power applications with good power-added efficiency while operating over the 2.4-2.5
More informationGHz Power Amplifier SST12LP00
FEATURES: 2.4-2.5 GHz Power Amplifier 2.4 GHz Power Amplifier APPLICATIONS: High Gain: Typically 28 db gain across 2.4 2.5 GHz over temperatures 0 85 C High linear output power: >24 dbm P1dB High power-added
More informationMicrochip Proprietary Information
2.4 GHz High-Power, High-Gain Power Amplifier The is a versatile power amplifier based on the highly-reliable InGaP/GaAs HBT technology. Easily configured for high-power applications with excellent power-added
More informationGHz High-Linearity Power Amplifier SST11LP12
is a high-power, high-gain power amplifier based on the highly-reliable InGaP/GaAs HBT technology. It is configured for high-power, high-efficiency applications with high power-added efficiency while operating
More information2.4 GHz Power Amplifier SST12LP14
FEATURES: 2.4 GHz Power Amplifier 2.4 GHz Power Amplifier High Gain: Typically 30 db gain across 2.4~2.5 GHz over temperature 0 C to +80 C High linear output power: >26.5 dbm P1dB Meets 802.11g OFDM ACPR
More information2.4 GHz High-Power, High-Gain Power Amplifier SST12LP08
FEATURES: High Gain: Typically db gain across.4~.5 GHz over temperature C to +85 C High linear output power: >8 dbm PdB - Please refer to Absolute Maximum Stress Ratings on page 5 Meets 8.g OFDM ACPR requirement
More information2.4 GHz High-Power, High-Gain Power Amplifier SST12LP15
FEATURES: SST-GP12152.4 GHz High Gain High Power PA High Gain: Typically 35 db gain across 2.4~2.5 GHz over temperature C to +8 C High linear output power: >29 dbm P1dB (Exceeding maximum rating of average
More information2.4 GHz High-Linearity Power Amplifier SST12LP10
FEATURES: 2.4 GHz High-Linearity Power Amplifier SST12LP1 SST12LP12.4 GHz High-Linearity Power Amplifier High Gain: >26 db gain across 2.4~2.5 GHz over temperature C to +8 C High linear output power: ~27
More informationProduct Description. Ordering Information. GaAs HBT GaAs MESFET InGaP HBT
GPS Low Noise Amplifier with Integrated Input/Output SAW Filters RF2818 GPS LOW NOISE AMPLIFIER WITH INTEGRATED INPUT/OUTPUT SAW FILTERS Package: Module, 3.0mmx2.5mmx1.0mm Features Compact Footprint: 3.0mmx2.5mmx1.0mm
More information40MHz to 4GHz Linear Broadband Amplifiers
MAX26 MAX26 0MHz to GHz Linear Broadband Amplifiers General Description The MAX26 MAX26 is a family of high-performance broadband gain blocks designed for use as a PA predriver, low-noise amplifier, or
More informationFeatures. = +25 C, Vdd = +10 V, Idd = 350 ma
HMC97APME v2.4 POWER AMPLIFIER,.2-22 GHz Typical Applications The HMC97APME is ideal for: Test Instrumentation Military & Space Functional Diagram Features High P1dB Output Power: + dbm High : 14 db High
More informationHigh IP3 Low-Noise Amplifier
EVALUATION KIT AVAILABLE General Description The low-cost, high third-order intercept point (IP3) low-noise amplifier (LNA) is designed for applications in 2.4GHz WLAN, ISM, and Bluetooth radio systems.
More informationFeatures. Gain: 14.5 db. Electrical Specifications [1] [2] = +25 C, Rbias = 825 Ohms for Vdd = 5V, Rbias = 5.76k Ohms for Vdd = 3V
Typical Applications The HMC77ALP3E is ideal for: Fixed Wireless and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Public Safety Radio Access Points Functional Diagram Features Noise Figure:.
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier. Pin Configuration/Functional Diagram/Typical Application Circuit MAX2659 BIAS
19-797; Rev 4; 8/11 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifier General Description The high-gain, low-noise amplifier (LNA) is designed for GPS, Galileo, and GLONASS applications. Designed in
More information20 MHz to 500 MHz IF Gain Block ADL5531
20 MHz to 500 MHz IF Gain Block ADL5531 FEATURES Fixed gain of 20 db Operation up to 500 MHz Input/output internally matched to 50 Ω Integrated bias control circuit Output IP3 41 dbm at 70 MHz 39 dbm at
More information1.9GHz Power Amplifier
EVALUATION KIT AVAILABLE MAX2248 General Description The MAX2248 single-supply, low-voltage power amplifier (PA) IC is designed specifically for applications in the 188MHz to 193MHz frequency band. The
More information315MHz/433MHz Low-Noise Amplifier for Automotive RKE
EVALUATION KIT AVAILABLE MAX2634 General Description The MAX2634 low-noise amplifier (LNA) with low-power shutdown mode is optimized for 315MHz and 433.92MHz automotive remote keyless entry (RKE) applications.
More informationRF2418 LOW CURRENT LNA/MIXER
LOW CURRENT LNA/MIXER RoHS Compliant & Pb-Free Product Package Style: SOIC-14 Features Single 3V to 6.V Power Supply High Dynamic Range Low Current Drain High LO Isolation LNA Power Down Mode for Large
More information30 MHz to 6 GHz RF/IF Gain Block ADL5611
Preliminary Technical Data FEATURES Fixed gain of 22.1 db Broad operation from 30 MHz to 6 GHz High dynamic range gain block Input/output internally matched to 50 Ω Integrated bias control circuit OIP3
More informationCGY2107HV CGY2107HV PRODUCT DATASHEET. Dual High Gain Low Noise High IP3 Amplifier. Rev 0.2 FEATURES APPLICATIONS DESCRIPTION
Rev 0.1 PRODUCT DATASHEET Dual High Gain Low Noise High IP3 Amplifier DESCRIPTION The is an extremely Low Noise cascode Amplifier with state of the art Noise Figure and Linearity suitable for applications
More information20 MHz to 500 MHz IF Gain Block ADL5531
Data Sheet FEATURES Fixed gain of 20 db Operation up to 500 MHz Input/output internally matched to 50 Ω Integrated bias control circuit Output IP3 41 dbm at 70 MHz 39 dbm at 190 MHz Output 1 db compression:
More informationCMD132P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationBGA5L1BN6 BGA5L1BN6. 18dB High Gain Low Noise Amplifier for LTE Lowband VCC GND. Features
BGA5L1BN6 Features Operating frequencies: 600-1000 MHz Insertion power gain: 18.5 db Insertion Loss in bypass mode: 2.7 db Low noise figure: 0.7 db Low current consumption: 8.2 ma Multi-state control:
More informationDC to 1000 MHz IF Gain Block ADL5530
Data Sheet FEATURES Fixed gain of 16. db Operation up to MHz 37 dbm Output Third-Order Intercept (OIP3) 3 db noise figure Input/output internally matched to Ω Stable temperature and power supply 3 V or
More information400 MHz 4000 MHz Low Noise Amplifier ADL5521
FEATURES Operation from 400 MHz to 4000 MHz Noise figure of 0.8 db at 900 MHz Including external input match Gain of 20.0 db at 900 MHz OIP3 of 37.7 dbm at 900 MHz P1dB of 22.0 dbm at 900 MHz Integrated
More informationCMD283C GHz Ultra Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Low power dissipation Pb-free RoHs compliant 3x3 QFN package Description The CMD283C3 is a broadband MMIC low noise
More informationFeatures. Gain: 17 db. OIP3: 25 dbm. = +25 C, Vdd 1, 2 = +3V
v.7 HMCLC Typical Applications The HMCLC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military & Space Functional
More informationSGB-6433(Z) Vbias RFOUT
SGB-6433(Z) DC to 3.5GHz ACTIVE BIAS GAIN BLOCK RFMD Green, RoHS Compliant, Pb-Free (Z Part Number) Package: 3x3 QFN, 16-Pin Product Description RFMD s SGB-6433 is a high performance SiGe HBT MMIC amplifier
More informationGPS/GNSS Front-End Amplifier
EVALUATION KIT AVAILABLE MAX2678 General Description The MAX2678 GPS/GNSS front-end amplifier IC is designed for automotive and marine GPS/GNSS satellite navigation antenna modules, or for any application
More informationFeatures. = +25 C, Vdd1, 2, 3 = 5V, Idd = 250 ma*
v.4 HMC498LC4 Typical Applications Features The HMC498LC4 is ideal for use as a LNA or Driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment & Sensors Military End-Use
More informationEVALUATION KIT AVAILABLE 3.5GHz Downconverter Mixers with Selectable LO Doubler. PART MAX2683EUE MAX2684EUE *Exposed pad TOP VIEW IFOUT+ IFOUT-
-; Rev ; / EVALUATION KIT AVAILABLE.GHz Downconverter Mixers General Description The MAX/MAX are super-high-performance, low-cost downconverter mixers intended for wireless local loop (WLL) and digital
More informationFeatures. = +25 C, Vdd = +3V
v.117 HMC3LPE Typical Applications Features The HMC3LPE is ideal for: Millimeterwave Point-to-Point Radios LMDS VSAT SATCOM Functional Diagram Low Noise Figure:. db High Gain: db Single Positive Supply:
More informationNLB-310. Cascadable Broadband GaAs MMIC Amplifier DC to 10GHz
Cascadable Broadband GaAs MMIC Amplifier DC to 10GHz NLB-310 The NLB-310 cascadable broadband InGaP/GaAs MMIC amplifier is a low-cost, high-performance solution for general purpose RF and microwave amplification
More informationVI1 VI2 VQ1 VQ2 II1 II2 IQ1 IQ2. Maxim Integrated Products 1
1-22; Rev ; 1/3 High-Gain Vector Multipliers General Description The MAX4/MAX4/MAX4 low-cost, fully integrated vector multipliers alter the magnitude and phase of an RF signal. Each device is optimized
More informationRF V LOW NOISE AMPLIFIER/ 3V DRIVER AMPLIFIER
3.3V LOW NOISE AMPLIFIER/ 3V DRIVER AMPLIFIER Package Style: SOT 5-Lead Features Low Noise and High Intercept Point Adjustable Bias Current Power Down Control Single 2.7V to 5.0V Power Supply 0.4GHz to
More informationData Sheet. MGA-231T6 High-Gain GPS LNA with Variable Current and Shutdown Function 31YM. Description. Features
MGA-231T6 High-Gain GPS LNA with Variable Current and Shutdown Function Data Sheet Description Avago Technologies MGA-231T6 is a low-noise amplifier (LNA) designed for GPS/ISM/Wimax applications in the
More information10 W, GaN Power Amplifier, 2.7 GHz to 3.8 GHz HMC1114
9 13 16 FEATURES High saturated output power (PSAT): 41.5 dbm typical High small signal gain: db typical High power gain for saturated output power:.5 db typical Bandwidth: 2.7 GHz to 3.8 GHz High power
More informationSGL0363Z. 5MHz to 2000MHz Low Noise Amplifier. Germanium. Simplified Device Schematic. Vpc. Narrow-band Matching Network. Gnd
5MHz to MHz Low Noise Amplifier Silicon Germanium 5MHz to MHz LOW NOISE AMPLIFIER SILICON GERMANIUM Package: SOT-363 Product Description RFMD s is a low power, low noise amplifier. It is designed for.7v
More informationIF Digitally Controlled Variable-Gain Amplifier
19-2601; Rev 1; 2/04 IF Digitally Controlled Variable-Gain Amplifier General Description The high-performance, digitally controlled variable-gain amplifier is designed for use from 0MHz to 400MHz. The
More informationMMA GHz 1W Traveling Wave Amplifier Data Sheet
Features: Frequency Range:.1 2 GHz P3dB: +29 dbm Gain: 12.5 db Vdd =12 V Ids =5 ma Input and Output Fully Matched to 5 Ω Applications: Fiber optics communication systems Microwave and wireless communication
More informationFeatures. = +25 C, Vdd = +15V, Vgg2 = +9.5V [1], Idq = 500 ma [2]
v3.41 Typical Applications Features The is ideal for: Test Instrumentation Military & Space Fiber optics Functional Diagram P1dB Output Power: + dbm Psat Output Power: + dbm High Gain: db Output IP3: 42
More informationFeatures. Parameter* Min. Typ. Max. Units Frequency Range GHz Gain 2 5 db. Gain Variation over Temperature
v3.1 HMC59MSGE AMPLIFIER,. -.9 GHz Typical Applications The HMC59MSGE is ideal for: DTV Receivers Multi-Tuner Set Top Boxes PVRs & Home Gateways Functional Diagram Features Single-ended or Balanced Output
More informationFeatures. = +25 C, Vdd= 5V. Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Units. Frequency Range GHz
Typical Applications The HMC62LP / HMC62LPE Wideband LNA is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features
More informationCMD158C GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.0 V, T A = 25 o C, F = 11 GHz
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 4x4 QFN package Description The CMD158C4 is
More informationRF OUT / N/C RF IN / V G
MAAM-111 MHz - 2 GHz Rev. V2 Features Functional Schematic 12 db Gain Ω Input / Output Match over Gain Range 3 db Gain Control with to -2 V Control +18 dbm Output Power + V, -. V DC, 7 ma Lead-Free 1.
More informationData Sheet ALM Dual-Band ( ) GHz & (4.9-6) GHz WLAN Low-Noise Amplifier. Description. Features. Surface Mount 3.0 x 3.0 x 1.
ALM-2812 Dual-Band (2.4-2.5) GHz & (4.9-6) GHz WLAN Low-Noise Amplifier Data Sheet Description Avago Technologies ALM-2812 is a dual-band LNA designed for WLAN applications in the (2.4-2.5)GHz and (4.9-6)GHz
More informationFeatures. = +25 C, Vcc = +5.0V. Vcc = +5V Parameter
Typical Applications Ideal as a Driver & Amplifier for: 2.2-2.7 GHz MMDS 3. GHz Wireless Local Loop - 6 GHz UNII & HiperLAN Functional Diagram Features P1dB Output Power: +14 dbm Output IP3: +27 dbm Gain:
More informationFeatures. FREQUENCY 900MHz 1950MHz 2450MHz NF (db) NF (db) IIP3 (dbm) GAIN (db)
EVALUATION KIT AVAILABLE MAX// to.ghz, Low-Noise, General Description The MAX// miniature, low-cost, low-noise downconverter mixers are designed for lowvoltage operation and are ideal for use in portable
More informationEVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers
19456; Rev ; 8/1 EVALUATION KIT AVAILABLE GPS/GNSS Low-Noise Amplifiers General Description The / low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim
More informationMAX2687 MAX2689 MAX2694. MAX2687 MAX2694 L1 = 4.7nH C1 = 100nF C2 = 10pF. MAX2689 L1 = 5.8nH C1 = 100nF C2 = 10pF
EVALUATION KIT AVAILABLE MAX27/MAX29/MAX29 General Description The MAX27/MAX29/MAX29 low-noise amplifiers (LNAs) are designed for GPS L1, Galileo, and GLONASS applications. Designed in Maxim s advanced
More informationGaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier HMC637BPM5E
9 11 13 31 NIC 3 ACG1 29 ACG2 2 NIC 27 NIC 26 NIC GaAs, phemt, MMIC, Single Positive Supply, DC to 7.5 GHz, 1 W Power Amplifier FEATURES P1dB output power: 2 dbm typical Gain:.5 db typical Output IP3:
More informationPreliminary Datasheet
Rev 2. CGY217UH 7-bit X-Band Core Chip DESCRIPTION The CGY217UH is a high performance GaAs MMIC 7 bit Core Chip operating in X-band. It includes a phase shifter, an attenuator, T/R switches, and amplification.
More informationSKY : 5 GHz Low-Noise Amplifier
DATA SHEET SKY6544-31: 5 GHz Low-Noise Amplifier Applications _ENABLE CC 82.11a/n/ac radios 5 GHz ISM radios Smartphones Bias Notebooks, netbooks, and tablets Access points, routers, and gateways RF_IN
More informationCMD158P GHz Driver Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 5.
Features Functional Block Diagram Broadband performance High output power Low current consumption Single supply voltage: +5.0 V @ 95 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD8P3 is
More informationRF3375 GENERAL PURPOSE AMPLIFIER
Basestation Applications Broadband, Low-Noise Gain Blocks IF or RF Buffer Amplifiers Driver Stage for Power Amplifiers Final PA for Low-Power Applications High Reliability Applications RF3375General Purpose
More informationRF3857 DUAL CHANNEL LNA WITH BYPASS MODE
DUAL CHANNEL LNA WITH BYPASS MODE Package Style: QFN, 16-Pin, 3mmx3mmx0.45mm Features Low Noise and High Intercept Point Adjustable Bias Current Power Down Low Insertion Loss Bypass Feature 1.8V to 4V
More informationMMA M4. Features:
Features: Frequency Range: 0.1 26.5 GHz P3dB: +27 dbm Gain: 12.5 db Vdd =8 to 12 V Ids =250 to 500 ma Input and Output Fully Matched to 50 Ω Surface Mount, RoHs Compliant QFN 4x4mm package Applications:
More informationPRELIMINARY DATASHEET
PRELIMINARY DATASHEET X-Band 8-12 GHz Low Noise Amplifier DESCRIPTION The is a high performance GaAs single supply Low Noise Amplifier MMIC designed to operate in the X band. The has an ultra-low noise
More informationFeatures OBSOLETE. = +25 C, Rbias = 0 Ohm. Bypass Mode Failsafe Mode Parameter
7 Typical Applications The HMC668LP3(E) is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femtocells Tower Mounted Amplifiers Test & Measurement Equipment Functional Diagram
More information2 GHz to 28 GHz, GaAs phemt MMIC Low Noise Amplifier HMC7950
Data Sheet FEATURES Output power for db compression (PdB): 6 dbm typical Saturated output power (PSAT): 9. dbm typical Gain: db typical Noise figure:. db typical Output third-order intercept (IP3): 6 dbm
More informationMMA M GHz, 1W MMIC Power Amplifier Data Sheet
Features: Frequency Range: 37-41 GHz P1dB: +30.5 dbm IM3 Level: -41 dbc @Po=18dBm/tone Gain: 22 db Vdd = 4 to 6 V Idsq = 1000 to 2000 ma Input and Output Fully Matched to 50 Ω Integrated power detector
More informationBGA855N6 BGA855N6. Low Noise Amplifier for Lower L-Band GNSS Applications GND. Features
Features Operating frequencies: 1164-1300 MHz Insertion power gain: 17.8dB Low noise figure: 0.60 db High linearity performance IIP3: 0 dbm Low current consumption: 4.8 ma Ultra small TSNP-6-10 leadless
More informationGaAs, phemt, MMIC, Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049LP5E
ACG ACG ACG FEATURES Low noise figure:. db PdB output power:. dbm PSAT output power: 7. dbm High gain: db Output IP: 9 dbm Supply voltage: VDD = 7 V at 7 ma Ω matched input/output (I/O) -lead, mm mm LFCSP
More informationFrequency (GHz) 5000 MHz
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier SGA-86(Z) DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free (Z Part Number) Package: SOT-86 Product Description The SGA-86
More information= 35 ma (Typ.) Frequency (GHz)
DC to 5MHz, Cascadable SiGe HBT MMIC Amplifier SGA-486(Z) DC to 5MHz, CASCADABLE SiGe HBT MMIC AMPLIFIER RFMD Green, RoHS Compliant, Pb-Free (Z Part Number) Package: SOT-86 Product Description The SGA-486
More informationFeatures. = +25 C, Vdd= 8V, Vgg2= 3V, Idd= 290 ma [1]
Typical Applications The is ideal for: Telecom Infrastructure Microwave Radio & VSAT Military EW, ECM & C 3 I Test Instrumentation Fiber Optics Functional Diagram Features P1dB Output Power: + dbm Gain:
More informationHMC997LC4. Variable Gain Amplifier - SMT. VARIABLE GAIN AMPLIFIER GHz. Typical Applications. General Description. Functional Diagram
v2.14 Typical Applications The is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM Subsystems Ka-Band Radar Test Equipment Functional Diagram Features Wide Gain Control Range: 1 db Single
More informationMMA GHz, 0.1W Gain Block Data Sheet
Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vds=5V Psat: 19.5 dbm @ Gain: 14 db Vdd =3 to 6 V Ids = 13 ma Input and Output Fully Matched to 5 Ω Applications: Communication systems Microwave instrumentations
More information4 GHz to 18 GHz Divide-by-8 Prescaler ADF5002
4 GHz to 18 GHz Divide-by-8 Prescaler ADF5002 FEATURES Divide-by-8 prescaler High frequency operation: 4 GHz to 18 GHz Integrated RF decoupling capacitors Low power consumption Active mode: 30 ma Power-down
More informationESD Sensitive Component!!
5 MHz LOW NOISE AMPLIFIER WHM3AE 1 REV E WHM3AE LNA is a low noise figure, wideband, and high linear SMT packaged amplifier with exceptional gain flatness design. The amplifier offers typical.7 db noise
More informationHMC694LP4 / 694LP4E. Variable gain amplifiers - ANALOG - smt. GaAs MMIC ANALOG VARIABLE GAIN AMPLIFIER, 6-17 GHz. Typical Applications
v2.1 Typical Applications The HMC694LP4(E) is ideal for: Point-to-Point Radio Point-to-Multi-Point Radio EW & ECM X-Band Radar Test Equipment Features Wide Gain Control Range: 23 db Single Control Voltage
More information20 MHz to 6 GHz RF/IF Gain Block ADL5542
FEATURES Fixed gain of db Operation up to 6 GHz Input/output internally matched to Ω Integrated bias control circuit Output IP3 46 dbm at MHz 4 dbm at 9 MHz Output 1 db compression:.6 db at 9 MHz Noise
More information4-8 GHz Low Noise Amplifier
4-8 GHz Low Noise Amplifier Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +4. V @ 75 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationFeatures = +5V. = +25 C, Vdd 1. = Vdd 2
v1.11 HMC51LP3 / 51LP3E POWER AMPLIFIER, 5-1 GHz Typical Applications The HMC51LP3(E) is ideal for: Microwave Radio & VSAT Military & Space Test Equipment & Sensors Fiber Optics LO Driver for HMC Mixers
More informationDC to 1000 MHz IF Gain Block ADL5530
DC to MHz IF Gain Block ADL3 FEATURES Fixed gain of 6. db Operation up to MHz 37 dbm Output Third-Order Intercept (OIP3) 3 db noise figure Input/output internally matched to Ω Stable temperature and power
More information10 W, Failsafe, GaAs, SPDT Switch 0.2 GHz to 2.7 GHz HMC546LP2E
FEATURES High input P.dB: 4 dbm Tx Low insertion loss:.4 db High input IP3: 67 dbm Positive control: V low control; 3 V to 8 V high control Failsafe operation: Tx is on when no dc power is applied APPLICATIONS
More information100 MHz to 4000 MHz RF/IF Digitally Controlled VGA ADL5240
1 MHz to 4 MHz RF/IF Digitally Controlled VGA ADL524 FEATURES Operating frequency from 1 MHz to 4 MHz Digitally controlled VGA with serial and parallel interfaces 6-bit,.5 db digital step attenuator 31.5
More informationFeatures. = +25 C, Vdd 1, 2, 3 = +3V
v.11 HMC6LC AMPLIFIER, 6-2 GHz Typical Applications The HMC6LC is ideal for use as a LNA or driver amplifier for: Point-to-Point Radios Point-to-Multi-Point Radios & VSAT Test Equipment and Sensors Military
More informationSKY LF: GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier
DATA SHEET SKY67107-306LF: 2.3-2.8 GHz Two-Stage, High Linearity and High Gain Low-Noise Amplifier Applications LTE cellular infrastructure and ISM band systems Ultra low-noise, high gain and high linearity
More informationCMD187C GHz Driver Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth High linearity Low current consumption Pb-free RoHs compliant 4x4 mm SMT package Description The CMD187C4 is a wideband driver amplifier housed in a leadless
More information400 MHz to 4000 MHz ½ Watt RF Driver Amplifier ADL5324
Data Sheet FEATURES Operation from MHz to MHz Gain of 14.6 db at 21 MHz OIP of 4.1 dbm at 21 MHz P1dB of 29.1 dbm at 21 MHz Noise figure of.8 db Dynamically adjustable bias Adjustable power supply bias:.
More informationCMD233C GHz Distributed Low Noise Amplifier. Features. Functional Block Diagram. Description
Features Functional Block Diagram Wide bandwidth Single positive supply voltage Low noise figure Pb-free RoHs compliant 4x4 QFN package Description The CMD233C4 is a wideband GaAs MMIC low noise amplifier
More informationHigh Isolation, Silicon SP4T, Nonreflective Switch, 9 khz to 12.0 GHz ADRF5040
RF4 RF3 7 8 9 1 11 12 21 2 19 RF2 High Isolation, Silicon SP4T, Nonreflective Switch, 9 khz to 12. GHz ADRF54 FEATURES FUNCTIONAL BLOCK DIAGRAM Nonreflective 5 Ω design Positive control range: V to 3.3
More informationHMC618ALP3E AMPLIFIERS - LOW NOISE - SMT. GaAs SMT phemt LOW NOISE AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram
7 Typical Applications The is ideal for: Cellular/3G and LTE/WiMAX/4G BTS & Infrastructure Repeaters and Femto Cells Public Safety Radios Functional Diagram v. Electrical Specifications T A = + C, Rbias
More informationCMD119P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.6 V, T A = 25 o C, F=8GHz
Features Functional Block Diagram Ultra low noise figure Low current consumption High gain broadband performance Single supply voltage: +3.6 V @ 3 ma Pb-free RoHs compliant 3x3 QFN package Description
More informationLF to 4 GHz High Linearity Y-Mixer ADL5350
LF to GHz High Linearity Y-Mixer ADL535 FEATURES Broadband radio frequency (RF), intermediate frequency (IF), and local oscillator (LO) ports Conversion loss:. db Noise figure:.5 db High input IP3: 25
More informationFeatures. = +25 C, Vdd1 = Vdd2 = +3.5V, Idd = 80 ma [2]
Typical Applications This is ideal for: Features Low Noise Figure: 1.8 db Point-to-Point Radios Point-to-Multi-Point Radios Military & Space Test Instrumentation Functional Diagram High Gain: 19 db High
More informationMMA C3 6-22GHz, 0.1W Gain Block Data Sheet
Features: Frequency Range: 6 22 GHz P1dB: 18.5 dbm @Vdd=5V P3dB: 19.5 dbm @Vdd=5V Gain: 14 db Vdd =3 to 6 V Ids = 130 ma Input and Output Fully Matched to 50 Ω Applications: Communication systems Microwave
More informationRFFM8500Q. 4.9GHz to 5.85GHz a/n Front End Module. Features. Applications. Ordering Information
4.9GHz to 5.85GHz 802.11a/n Front End Module The RFFM8500Q provides a complete integrated solution in a single Front End Module (FEM) for WiFi 802.11a/n systems. The ultra small form factor and integrated
More information30 MHz to 6 GHz RF/IF Gain Block ADL5544
Data Sheet FEATURES Fixed gain of 17.4 db Broadband operation from 3 MHz to 6 GHz Input/output internally matched to Ω Integrated bias control circuit OIP3 of 34.9 dbm at 9 MHz P1dB of 17.6 dbm at 9 MHz
More informationCMD157P GHz Low Noise Amplifier. Features. Functional Block Diagram. Description. Electrical Performance - V dd = 3.
Features Functional Block Diagram Ultra low noise figure High gain broadband performance Single supply voltage: +3. V @ 52 ma Pb-free RoHs compliant 3x3 QFN package Description The CMD7P3 is a broadband
More informationGaAs phemt MMIC Low Noise Amplifier, 0.3 GHz to 20 GHz HMC1049
ACG ACG ACG FEATURES Low noise figure:. db PdB output power:. dbm PSAT output power: 7. dbm High gain: db Output IP: 9 dbm Supply voltage: VDD = 7 V at 7 ma Ω matched input/output (I/O) -lead mm mm SMT
More informationMMA R4 30KHz-50GHz Traveling Wave Amplifier Data Sheet October 2012
Features: Frequency Range: 30KHz 40 GHz P1dB: +22 dbm Vout: 7V p-p @50Ω Gain: 13.5 db Vdd =7 V Ids = 200 ma Input and Output Fully Matched to 50 Ω In 4x4mm QFN package Applications: Fiber optics communication
More informationSKY : 5 GHz Low-Noise Amplifier
DATA SHEET SKY6544-31: 5 GHz Low-Noise Amplifier Applications V_ENABLE VCC 82.11a/n/ac radios 5 GHz ISM radios Smartphones Bias Notebooks, netbooks, and tablets Access points, routers, and gateways RF_IN
More information50 MHz to 4.0 GHz RF/IF Gain Block ADL5602
Data Sheet FEATURES Fixed gain of 20 db Operation from 50 MHz to 4.0 GHz Highest dynamic range gain block Input/output internally matched to 50 Ω Integrated bias control circuit OIP3 of 42.0 dbm at 2.0
More informationAbsolute Maximum Ratings Parameter Rating Unit Max Input Power, OFDM Modulated, 3:1 Load VSWR +39 dbm Max Input Power, 2:1 VSWR +41 dbm ESD HBM Rating
1W GaAs phemt SPDT Switch FMS231-1 1W GaAs phemt SPDT SWITCH Package: 3mmx3mm QFN Product Description The FMS231-1 is a 1W, Single-pole, Double-throw, (SPDT) GaAs phemt reflective antenna switch. The switch
More informationData Sheet. MGA W High Linearity Driver Amplifier. Features. Description. Specifications. Pin connections and Package Marking
MGA-31816 0.1 W High Linearity Driver Amplifier Data Sheet Description Avago Technologies MGA-31816 is a high linearity driver MMIC Amplifier housed in a standard QFN 3X3 16 lead plastic package. It features
More information