Normally closed DIP8-pin type of 400V load voltage. FEATURES 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units
|
|
|
- Leona Barton
- 6 years ago
- Views:
Transcription
1 Normally closed DIP8-pin type of V load voltage GU Form B (AQW) (Height includes standoff) FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units TYPICAL APPLICATIONS High-speed inspection machines Telephone equipment Computers Sensing equipment mm inch Two Form B units 8 7 Form B type 6 RoHS compliant. Applicable for Form B use as well as two independent Form B use. Controls load currents up to. A with an input current of ma. High speed switching: operate time Typ..6 ms. Extremely low closed-circuit offset voltages to enable control of small analog signals without distortion TYPES AC/DC dual use rating* Load voltage Load current Package Through hole terminal Tube packing style Part No. Surface-mount terminal Tape and reel packing style Picked from the //-pin side Picked from the //6-pin side V ma DIP8-pin AQW AQWA AQWAX AQWAZ *Indicate the peak AC and DC values. Note: The surface mount terminal shape indicator A and the packing style indicator X or Z are not marked on the device. Tube tube contains: pcs. batch contains: pcs. Packing quantity Tape and reel, pcs RATING. Absolute maximum ratings () Item Symbol AQW(A) Remarks LED forward current IF ma LED reverse voltage VR V Peak forward current IFP A f = Hz, Duty factor =.% Power dissipation Pin 7 mw Load voltage (peak AC) VL V Peak AC, DC Continuous load current IL. A (. A) ( ): in case of using only channel Peak load current Ipeak. A ms ( shot), VL = DC Power dissipation Pout 8 mw Total power dissipation PT 8 mw I/O isolation voltage Viso, Vrms Ambient temperature Operating Topr to +8 C to +8 F (Non-icing at low temperatures) Storage Tstag to + C to + F ASCTBE 7-T
2 GU Form B (AQW). Electrical () Item Symbol AQW(A) Condition Transfer LED operate (OFF) current LED reverse (ON) current LED dropout voltage Minimum IFoff IFon VF.7 ma ma. ma.6 ma V (. V at IF = ma). V IF = ma 6 Ω IF = ma On resistance Ron IL= Max. Ω Within s Off state leakage current ILeak μa IF = ma VL = Max. Operate (OFF) time* Reverse (ON) time* Toff Ton.6 ms IF = ma ma ms. ms IF = ma ma ms.8 pf f = MHz I/O capacitance Ciso. pf VB = V Initial I/O isolation resistance Minimum Riso, MΩ V DC *Operate/Reverse time % Toff Ton 9%. Recommended operating conditions () Please use under recommended operating conditions to obtain expected. AQW(A) Item Symbol Number of used channels Min. Max. Unit LED current IF ma Load voltage (Peak AC) VL V Continuous load current IL ch ch.. A These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. REFERENCE DATA. Load current vs. ambient temperature Allowable ambient temperature: to +8 C to +8 F Using only channel. On resistance vs. ambient temperature LED current: ma; Continuous load current: ma (DC) 6. Operate (OFF) time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC) Load current, ma Using channels 8 6 On resistance, Ω Operate (OFF) time, ms ASCTBE 7-T
3 GU Form B (AQW). Reverse (ON) time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC) Reverse (ON) time, ms LED operate (OFF) current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) LED operate (OFF) current, ma 6. LED reverse (ON) current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) LED reverse (ON) current, ma LED dropout voltage vs. ambient temperature LED current: to ma LED dropout voltage, V..... ma ma ma ma ma Operate (OFF) time vs. LED forward current Load voltage: V (DC); Continuous load current: ma (DC);. 8. Current vs. voltage of output at MOS portion Voltage, V Current, ma. Reverse (ON) time vs. LED forward current Load voltage: V (DC); Continuous load current: ma (DC); 9. Off state leakage current vs. load voltage Off state leakage current, A Load voltage, V. capacitance vs. applied voltage LED current: ma; Frequency: MHz; Operate (OFF) time, ms.... Reverse (ON) time, ms capacitance, pf LED forward current, ma 6 LED forward current, ma 6 Applied voltage, V ASCTBE 7-T
4
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: AQW AQWA
GU 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a DIP8-pin package GU Form A & Form B (AQW) 9.78.8... 9.78.8..9... (Height includes standoff) mm inch 8 N.C. 7 N.O. FEATURES. Approx. / the space compared with
Approx. 25% Approx. 50% Footprint
Miniature SOP6-pin type of 6 to 6V load voltage GU SOP Form A (AQV S). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset
Flat Power-DIP4-pin type with high capacity up to 2A load current
Flat Power-DIP-pin type with high capacity up to A load current PD Form A (AQY7 ) 9.....9. 9.. (Height includes standoff)...7. mm inch FEATURES. Flat-Packaged type (W). (D) 9. (H).9 mm (W). (D). (H). inch.
Normally closed SOP6-pin type of 400V load voltage
Normally closed SOP6-pin type of V load voltage GU SOP Form B (AQVS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP6-pin package The device comes in a small SOP measuring (W). (L) 6. (H).
Capable of 2.4A to 3.5A high capacity load current control
Capable of.a to.a high capacity load current control HE Form A High Capacity (AQV G) 8.8.6 6...9. 8.8 6..6..6. (Height includes standoff) mm inch 6 FEATURES. Greatly increased load current in a compact
DIP6-pin type with wide variation Low on-resistance
HF Form A (AQV, ) DIP-pin type with wide variation Low on-resistance HF Form A (AQV, ) 8.8....9. Height includes standoff 8.8..... mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely
Miniature SOP6-pin type with high capacity of 3A load current
Miniature SOP6-pin type with high capacity of A load current HE SOP Form A High Capacity (AQV G S). 6..7.8..8 6 mm inch FEATURES. High capacity in a miniature SOP package Continuous load current: Max.
Miniature SOP6-pin type Low on-resistance 200V/400V load voltage
Miniature SOP6-pin type Low on-resistance V/V load voltage RF SOP Form A Low on-resistance (AQV NS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP-pin package (W). (L) 6. (H). mm (W).7 (L).8
6-pin type for switching low-level analog signal
(Standard type) (Reinforced type) 6-pin type for switching low-level analog signal GU Form A (AQV, AQVH) TYPES AC/DC dual use 8.8.6 6.. 8.8.6 6...9..6. *Indicate the peak AC and DC values. Note: The surface
Short circuit protection (Non-latch type) only for DC load
Short circuit protection (Non-latch type) only for DC load GU Form A Short Circuit Protection (AQVKL) 8.8 6.. 8.8 6..6.6..9.6.. (Height includes standoff) mm inch 6 + RoHS compliant FEATURES. Protects
RF VSSOP 1 Form A C R
C R type VSSOP package 6V and V load voltage RF VSSOP Form A C R (AQY T).8.7.9...8 mm inch FEATURES. Miniature VSSOP package.6 mm mounting area achieved. Approx. 9% less than previous product (SON type).
Small SOP4-pin type with short circuit protecting (Latch type)
Small SOP-pin type with short circuit protecting (Latch type) GU SOP Form A Short Circuit Protection (AQYKS)..69..7..8 mm inch FEATURES. Short circuit protection (Latch type) When the output current exceeds
Max. high capacity 10A in a slim SIL package
Max. high capacity A in a slim SIL package Power Form A DC High Capacity (AQZ9 )..9..77..7 + RoHS compliant Height includes standoff mm inch FEATURES. High capacity type power PhotoMOS. Can switch a wide
Compact DIP8-pin type of 60V to 600V load voltage
Compact DIP8-pin type of 6V to 6V load voltage GU Form (QW ) 6. 6. 9.78. 9.78..8.8.9.6.. (Height includes standoff) mm inch 8 7 6 RoHS compliant FETURES. Compact 8-pin DIP size The device comes in a compact
Slim type with high capacity up to 4A DC load type also available
Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ).7 + DC type....9 (Height includes standoff) mm inch RoHS compliant AC/DC type FEATURES. Slim SIL-pin package (W). (D).
C R type SSOP package 60 V, 80 V and 100 V load voltage
C R type SSOP package 6 V, 8 V and V load voltage RF SSOP Form A C R (AQY V).65. RoHS compliant.5.75.8.7 mm inch FEATURES. Miniature SSOP package (Compared to SOP -pin models, volume ratio can be reduced
High capacity up to 6A in a slim SIL package
High capacity up to A in a slim SIL package Power Form A High Capacity (AQZ G) New Height includes standoff.7....9 RoHS compliant mm inch Please check our website for the latest information regarding compliance
Slim type with high capacity up to 4A DC load type also available
VDE Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ) Height includes standoff.7 + + DC type + AC/DC type....9 RoHS compliant mm inch FEATURES. Slim SIL-pin package
Distributed by: www.jameco.com -8-8- The content and copyrights of the attached material are the property of its owner. High sensitivity and low on-resistance. DIP ( Form A) -pin type. HE PhotoMOS (AQV
GE 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a compact DIP8-pin Reinforced insulation (QWEH, EH) () GE Form & Form B (QW EH) 9.78. 9.78..8..8..9... (Height includes standoff) mm inch N.C. 8 7 N.O. RoHS
Miniature SOP4-pin type Low C R 60V/80V load voltage. FEATURES 1. Low capacitance and low on resistance (Load voltage: 60 to 80V)
() Miniature SOP4-pin type Low C R 6V/8V load voltage RF SOP Form A C R (AQY R S) 4.3 4.4.69.73..83 mm inch 4 3 RoHS compliant FEATURES. Low capacitance and low on resistance (Load voltage: 6 to 8V) capacitance
Slim and high capacity up to 3.6A Voltage-driven type
Slim and high capacity up to 3.A Voltage-driven type Power 1 Form A Voltage-sensitive (AQZ1 D, D) 1 3.5 1.13.7 1.5.9 (Height includes standoff) mm inch + 3 1 3 DC type AC/DC type RoHS compliant FEATURES
RF SOP 1 Form A C R10
RF SOP Form A C R (AQY S) Miniature SOP4-pin with C R 4V load voltage RF SOP Form A C R (AQY S) 4.3 4.4 4.3 4.4.69.73.69.73...83.83 mm inch 4 3 RoHS compliant FEATURES. Both low on-resistance
POWER PhotoMOS RELAYS 1-channel (Form A) Type FEATURES
POWER PhotoMOS RELAYS -channel (Form A) Type PhotoMOS RELAYS FEATURES ±..7±..±..±..±..9±. mm inch. High capacity PhotoMOS Relay in a compact and slim -pin SIL. Extremely low ON resistance. Control low-level
Space-saving SSOP 1 Form A type with built-in registor 40V load voltage
Space-saving SSOP Form A type with built-in registor V load voltage RF SSOP C R Voltage-sensitive (AQYF V).6...7.8.7 mm inch RoHS compliant FEATURES. Built-in input resistor means less man-hours when mounting
SUNSTAR 传感与控制 TEL: FAX: POWER PhotoMOS RELAYS (Voltage Sensitive Type) Photo
POWER PhotoMOS RELAYS (Voltage Sensitive Type) PhotoMOS RELAYS 1±..7±. FEATURES 3.5±..13±. 1.5±..9±. mm inch 1. A voltage sensitive power Photo- MOS relay Conventional power PhotoMOS relays are connected
APT Phototriac Coupler
Phototriac coupler ideal for triac driver with wide variation VDE APT Phototriac Coupler ZC circuit ORDERING INFORMATION ON-state RMS :.5 A/. A RoHS compliant ZC APT : V function : With zero-cross function
8 PIN DIP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET
8 PIN DIP 4 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7141-1C FEATURES 2 CHANNEL TYPE: (1a + 1b output) LOW LED OPERATING CURRENT: IF = 2 ma DESIGNED FOR AC/DC SWITCHING LINE CHANGER
Phototriac Coupler (APT1)
Phototriac coupler ideal for triac driver with wide variation APT VDE Phototriac Coupler (APT) FEATURES. Low zero-cross voltage (max. 5 V) type added to lineup. Approximately / of previous product Helps
MOS FET Relays G3VM-21HR
MOS FET Relays GVM-HR Low -mω ON Resistance. High-power,.-A Switching with SOP Package. Continuous load current of. A (connection C = A). Dielectric strength of, Vrms between I/O. RoHS Compliant Application
MOS FET Relays G3VM-61G1
MOS FET Relays GVM-6G MOS FET Relay Designed for Switching Minute and Analog Signals, SOP Package. Upgraded GVM-S Series. Continuous load current of ma. Dielectric strength of,5 Vrms between I/O. RoHS
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
MOS FET Relays G3VM-41PR5
MOS FET Relays Smallest 4V MOS FET Relay In The Market (USOP Package); Designed to exhibit Low Output Capacitance and ON Resistance (C R = pf Ω) Specifically Designed for low ON resistance of Ω (typical).
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET DESCRIPTION The is a solid state relay containing GaAs LEDs on the light emitting side (input
RF (Radio Frequency) C R 10 SSOP Type
UL pending CSA pending RF (Radio Frequency) C R SSOP Type (by) PhotoMOS RELAYS FEATURES..7.8.7.6. mm inch. Reduced package size Lower surface has been reduced 6% and mounting space % compared to conventional
DATA SHEET. 6, 8-PIN DIP, 200 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET
DATA SHEET Solid State Relay OCMOS FET PS7122-1A-2A,PS7122L-1A,-2A 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7122-1A, -2A and PS7122L-1A, -2A are solid state
MOS FET Relays G3VM-353H/H1
MOS FET Relays GVM-H/H Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts. General-purpose Series Added. New models in load voltage with SPST-NC contacts
PhotoIC Coupler (AlGaAs LED & PhotoIC)
0 Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS) New +..73..087.3.69 Vcc Vout GND mm inch 3 FEATURES. High speed Photo Coupler with receiver circuit IC. Capable of high speed communication (Transfer
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER Part No.: Product: Date: February 09, 2018 Page 1 of 18 Table of Contents: Introduction... 3 Absolute Maximum Rating... 6 Electrical Characteristic:
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The is an optically coupled element that combines a GaAs infrared LED
30 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 4V DC or peak AC, SMD or, Low Off-State Leakage Current, UL listed, RoHS Compliance Applications: Battery Management Systems, I/O Modules,
PhotoIC Coupler (AlGaAs LED & PhotoIC)
Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS, APS) New...87.3.69.73 mm inch Totem pole output Open drain output Vcc Vcc 5 Vout Vout 5 GND 3 GND 3 Truth table Truth table LED Output LED Output
45 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 60V DC or Peak AC THT, SMD or SOP Tested in accordance with AEC-Q101, UL listed, RoHS Compliance Applications: Battery Management Systems,
8-PIN DIP, 250 V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7122A-1C,PS7122AL-1C DESCRIPTION 8-PIN DIP, V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1C and PS7122AL-1C are transfer
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package
SHENZHEN TENAND TECHNOLOGY CO.,LTD http://www.tenand.com LITE-ON TECHNOLOGY CORPORATION LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package Rev.A March2011 Description
GENERAL PURPOSE SOLID STATE RELAY 8PIN DIP 2-CHANNEL TYPE FORM A SSR
Schematic Features Compact 8-pin DIP size Applicable for 2 Form A use as well as two independent 1Form A use Controls low-level analog signals High sensitivity and high speed response Low-level off state
MOS FET Relays in DIP 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
4-pin, Type in 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay Load voltage: V, 4 V, 6 V, or V -V Relay: Continuous load current of A max. 4-V Relay:
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A, -2A
KAQW614 Series. cosmo 8PIN 400V N.O.+ N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two independent Form A and Form B SPST relays. The relay is constructed using a GaAlAs LED for actuation control and an integrated monolithic dies for the switch output.
6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER 4N2X Series 4N3X Series H11AX Series
Schematic Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V
DATA SHEET. 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
DATA SHEET 4-PIN SOP,.6 Ω LOW ON-STATE RESISTANCE 6 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS726-1A NEPOC Series DESCRIPTION The PS726-1A is a low on-state
KAQV414 Series. cosmo 6PIN 400V N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQV series is robust, ideal for telecom and ground fault applications. It is a SPST normally close switch ( Form B) that replaces electromechanical relays in many applications. It is constructed
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs
The highest class load current of MOS FET Relays realized with DIP8 package
GVM-@CR@/@FR@ DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, or V GVM-@CR@/@FR@ -V Relay:
8-PIN SOP, 260 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
8-PIN SOP, 26 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7221A-2A NEPOC Series DESCRIPTION The PS7221A-2A is a solid state relay containing
Test & Measurement equipment Power circuit. 2. Contact form 1 : 1a (SPST-NO) terminals 40 : 400 V. 4. Additional functions R: Low ON resistance
DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, V, V, or V GVM-@CR@/@FR@ -V Relay: Continuous
GU (General Use) Type 2-Channel (Form A) Type
GU (General Use) Type -Channel (Form A) Type AQW PhotoMOS RELAYS UL File No.: E9 CSA File No.: LR 9.....9±..±. 9.. mm inch...±..±. FEATURES. Compact -pin size The device comes in a compact (W). (L) 9.
KAQW212 Series. cosmo 8PIN 60V N.O. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two normally open switches that can be used as two independent SPST relays or as one DPST relay. The relay is constructed using a GaAlAs LED for actuation control and
MOS FET Relays in DIP 6-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) Low-ON-resistance GVM-@BR@/@ER@ -pin, High-current Type in -pin packages
GU (General Use) Type 2-Channel (Form B) Type. Part No. Surface-mount terminal Tape and reel packing style Picked from the 1/2/3-pin side.
GU (General Use) Type -Channel (Form B) Type AQW PhotoMOS RELAYS UL File No.: E9 CSA File No.: LR FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units Two Form B units
KAQY214 Series. cosmo. 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output. Description. Schematic. Features. Application 1 FORM A NORMALLY OPEN
Description The KAQY series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch ( Form A) that replaces electromechanical relays in many applications. It is constructed
KAQY214 Series 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output
Description The KAQY214 series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is
6-PIN DIP, 400V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE
DESCRIPTION The PS7141E-1A and PS7141EL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A,
8-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS716-2A,PS716L-2A 8-PIN DIP, 6 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS716-2A and PS716L-2A are solid state
General-purpose MOS FET Relays in DIP packages for a wide range of applications
Introduction General-purpose High-load-voltage Multi-contact-pair (a, b, and ab), General-purpose Type General-purpose in packages for a wide range of applications Package: 4-pin or 6-pin Contact form:
DISCONTINUED PS7904-1A. Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
OCMOS FET 4-PIN SMALL FLAT-LEAD, LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET DESCRIPTION Preliminary Data Sheet The is a low output capacitance solid state relay containing a GaAs LED on the light
H11F1M, H11F2M, H11F3M Photo FET Optocouplers
, H11F2M, H11F3M Photo FET Optocouplers Features As a remote variable resistor: 100Ω to 300MΩ 15pF shunt capacitance 100GΩ I/O isolation resistance As an analog switch: Extremely low offset voltage 60
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (3.4 pf Ω) 1-ch Optical Coupled MOS FET
DESCRIPTION The PS781M-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. An ultra small flat-lead package
Q825 8-PIN DIP PHOTOTRANSISTOR OPTOCOUPLER Feature: UL recognized (File # E338132) Creepage distance > 7.62mm
Feature: Certification & Compliance: High Isolation voltage between input and output Pb free and RoHS Compliant (Viso = 5000V rms) UL recognized (File # E338132) Creepage distance > 7.62mm VDE recognized
SUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY
SUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY CJ RELAYS (ACJ) RoHS compliant FEATURES Smallest in its class, it is extremely compact at approx. 2/3 the size of previous products. Compared to our previous
ACCL High Speed Quad-Channel 3/1 Digital Isolator. Data Sheet. Description. Features. Functional Diagram. Applications GND 1
High Speed Quad-Channel 3/1 Digital Isolator Description ACCL-9410 is a quad-channel bi-directional digital isolator. Using capacitive coupling through an insulation barrier, the isolator enables high
Product: Q814 Date: February 1, 2011 Page 1 of 13 Version# 1.2
Feature: High Isolation voltage between input and output (Viso = 5000V rms) Current transfer ration (CTR: Min. 20% at I F = ±1mA, V ce =5V) High collector-emitter voltage V CEO =80V Operating Temperature
MOS FET Relays in SSOP packages that achieve a low C R
@ S, Low-output-capacitance and Low-ON-resistance Type (with Low C R) in S packages that achieve a low C R Load voltage: V : Low C R = 5 pf Ω, COFF (standard) = pf, RON (standard) = 5 Ω : Low C R =. pf
4N2X Series 4N3X Series H11AX Series 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. Features: Description. Applications
Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V rms) Creepage
4N25 Phototransistor Optocoupler General Purpose Type. Features
4N Phototransistor Optocoupler General Purpose Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The 4N is an
ACDC56-41QBWA/D-F01 Surface Mount Display
Surface Mount Display DESCRIPTIONS The Blue source color devices are made with InGaN Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS8741 FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
DESCRIPTION FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER PHOTOCOUPLER PS8741 NEPOC Series The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
USOP Package with Low Output Capacitance and ON Resistance
G3VM-PR@ U, Low-output-capacitance and Low-ON-resistance Type (with Low C R) U Package with Low Output Capacitance and ON Resistance : V : Low C R =.4 pf Ω, COFF (standard) =.8 pf, RON (standard) = 3 Ω
Low Voltage, 400 MHz, Quad 2:1 Mux with 3 ns Switching Time ADG774A
Data Sheet FEATURES Bandwidth: >4 MHz Low insertion loss and on resistance: 2.2 Ω typical On resistance flatness:.3 Ω typical Single 3 V/5 V supply operation Very low distortion:
LH1505AB/ AAC/ AACTR. Pb Pb-free. Dual 1 Form A Solid State Relay. Vishay Semiconductors
LH155AB/ AAC/ AACTR Dual 1 Form A Solid State Relay Features Two Independent Relays Current Limit Protection Isolation Test Voltage 53 V RMS Typical R ON 15 Ω Load Voltage 25 V Load Current 12 ma High
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
DESCRIPTION 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7241E-1B NEPOC Series The PS7241E-1B is an optically coupled element that
2.0x1.25 mm INFRARED EMITTING DIODE. Features. Description. Package Dimensions. Part Number: APT2012SF4C-PRV
2.0x1.25 mm INFRARED EMITTING DIODE Part Number: APT2012SF4C-PRV Features 2.0mmx1.25mm SMD LED,0.75mm thickness. Mechanically and spectrally matched to the phototransistor. Package: 2000pcs / reel. Moisture
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1B, -2B and PS7122AL-1B, -2B are solid state
Property of LITE-ON Only ` Part No. LTV-217 / 227 / 247 Series Page : 1 of 16
FEATURES LITE-ON TECHNOLOGY CORPORATION ` * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-2X7 series ( Viso = 3.75KVrms ) * Employs
Full-Color 1204 SMD (150 Viewing Angle)
(150 Viewing Angle) Full-color RGB Top-view or side-view mounting options Compatible with automatic placement equipment Compatible with infrared and vapor phase reflow solder process The & is a compact
FSAV433 High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch
January 2011 FSAV433 High-Bandwidth (550MHz), 3-Channel, 3:1 Video Switch Features Ground between Channels to Optimize Isolation and Reduce Hostile Crosstalk -70dB Non-Adjacent Channel Crosstalk at 30MHz
Property of LITE-ON Only FEATURES
FEATURES * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-217/227/247 Series ( Viso = 3.75KVrms ) * Employs double transfer mold technology
EL301X Series EL302X Series EL305X Series 6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER. Features: Description. Applications
Features: Peak breakdown voltage - 250V: EL301X - 400V: EL302X - 600V: EL305X High isolation voltage between input and output (Viso=5000 V rms ) Compact dual-in-line package Pb free and RoHS compliant.
Q817 series 4-PIN DC INPUT OPTOCOUPLER Feature: Certification & Compliance: Halogen Free
Feature: Certification & Compliance: Halogen Free Pb free and RoHS Compliant High Isolation voltage between input and output UL recognized (File # E338132) (Viso = 5000V rms) VDE recognized (File # 40030457)
Security equipment Industrial equipment Power circuit
, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product
Transistor Output SMALL OUTLINE OPTOISOLATORS TRANSISTOR OUTPUT SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit
Transistor Output These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic
CNY17-X Series CNY17F-X Series 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. Features. Description. Applications
Features Current transfer ratios in selected narrow range groups CNY17-1, CNY17F-1: 40-80% CNY17-2, CNY17F-2: 63-125% CNY17-3, CNY17F-3: 100-200% CNY17-4, CNY17F-4:160-320% High isolation voltage between
FSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch
March 2008 FSUSB22 Low-Power, 2-Port, High-Speed USB 2.0 (480Mbps) Switch Features -40dB Off Isolation at 250MHz -40dB Non-adjacent Channel Crosstalk at 250MHz On Resistance: 4.5Ω Typical (RON) -3dB Bandwidth:
MOS FET Relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) GVM-@HR -pin, High-current and Type in -pin packages that achieve the
TSST8. Embossed Tape Reel size (mm) 180 lapplication Type Tape width (mm) 8 Switching Basic ordering unit (pcs) 3000
RT1A060AP Pch -12V -6A Middle Power MOSFET Datasheet V DSS -12V R DS(on) (Max.) 19mΩ I D ±6A P D 1.25W lfeatures 1) Low on - resistance. 2) -1.5V Drive. 3) Built-in G-S Protection Diode. 4) Small Surface
Data Sheet. HCPL-181 Phototransistor Optocoupler SMD Mini-Flat Type. Description
HCPL-8 Phototransistor Optocoupler SMD Mini-Flat Type Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product Description The HCPL-8