RF VSSOP 1 Form A C R
|
|
|
- Lester Simmons
- 5 years ago
- Views:
Transcription
1 C R type VSSOP package 6V and V load voltage RF VSSOP Form A C R (AQY T) mm inch FEATURES. Miniature VSSOP package.6 mm mounting area achieved. Approx. 9% less than previous product (SON type). Contributes to the miniaturization of instruments and higher density mounting. % % % 6% RoHS compliant SOP pin SSOP SON VSSOP. Load voltage: 6 V and V. Low C R Low on resistance and low output capacitance available 6 V load voltage: Output capacitance: Typ. 7 pf, On resistance: Typ..8Ω V load voltage: Output capacitance: Typ. 5.8 pf, On resistance: Typ. 8.8Ω TYPICAL APPLICATIONS. Measuring and testing equipment IC tester, Probe card, Board tester and other testing equipment. Telecommunication equipment *Does not support automotive applications. TYPES Type AC/DC dual use Output rating* Part No. (Tape and reel packing style)* Packing quantity in the tape and reel Load voltage Load current Picked from the and -pin side Picked from the and -pin side 6 V ma Y W V ma Y W Notes: *. Indicate the peak AC and DC values. *. Only tape and reel package is available. For space reasons, only R or 5R is marked on the product as the part number., pcs. ASCTBE 7-T
2 RF VSSOP Form A C R (AQY T) RATING. Absolute maximum ratings (Ambient temperature: 5 C 77 F) Item Symbol Remarks Input side LED forward current IF 5 ma LED reverse voltage VR 5 V Peak forward current IFP A f = Hz, Duty factor =.% Power dissipation Pin 75 mw Load voltage (peak AC) VL 6 V V Output side Continuous load current IL. A. A Peak AC, DC Peak load current Ipeak. A. A ms (shot), VL = DC Power dissipation Pout 5 mw Total power dissipation PT mw I/O isolation voltage Viso Vrms Ambient Operating Topr to +85 C to +85 F (Non-icing at low temperatures) temperature Storage Tstg to + C to + F. Electrical (Ambient temperature: 5 C 77 F) Input Output Transfer Item Symbol Condition LED operate current LED turn off current LED dropout voltage Minimum IFon IFoff VF Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area.. ma ma. ma.5 ma. V (.5 V at IF = 5 ma).5 V : IL = ma : IL = 8 ma IF = 5 ma.8 Ω 8.8 Ω : IF = 5 ma, IL = ma On resistance Ron : IF = 5 ma, IL = 8 ma.5 Ω Ω Within s Output 7 pf 5.8 pf Cout capacitance pf 8 pf IF = ma, VB = V, f = MHz Off state. na ILeak leakage current * na IF = ma, VL = Max. Turn on time** Turn off time** I/O capacitance Ton Toff Ciso. ms. ms.5 ms.8 ms.5 ms. ms. pf.5 pf : IF = 5 ma, VL = V, RL = Ω : IF = 5 ma, VL = V, RL = 5 Ω f = MHz, VB = V *Available as custom orders ( na or less) **Turn on/turn off time Input 9% Output % Ton Toff. Recommended operating conditions (Ambient temperature: 5 C 77 F) Please use under recommended operating conditions to obtain expected. Item Symbol Min. Max. Unit LED current IF 5 ma Load voltage (Peak AC) VL V Continuous load current IL. A Load voltage (Peak AC) VL 5 V Continuous load current IL. A These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. ASCTBE 7-T
3 RF VSSOP Form A C R (AQY T) REFERENCE DATA.-() Load current vs. ambient temperature Allowable ambient temperature: to +85 C to +85 F Load current, A () Load current vs. ambient temperature Allowable ambient temperature: to +85 C to +85 F Load current, ma 8 6.-() On resistance vs. ambient temperature Measured portion: between terminals and LED current: 5 ma; Load voltage: V (DC) Continuous load current: Max. (DC) On resistance, Ω () On resistance vs. ambient temperature LED current: 5 ma; Load voltage: V (DC); Continuous load current: 8mA (DC) 5.-() Turn on time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC); Continuous load current: ma (DC).5.-() Turn on time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC); Continuous load current: 8mA (DC). On resistance, Ω () Turn off time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC); Continuous load current: ma (DC).5.-() Turn off time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC); Continuous load current: 8mA (DC). 5.-() LED operate current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) LED operate current, ma ASCTBE 7-T
4 RF VSSOP Form A C R (AQY T) 5.-() LED operate current vs. ambient temperature Load voltage: V (DC); Continuous load current: 8mA (DC) 5 6.-() LED turn off current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) 6.-() LED turn off current vs. ambient temperature Load voltage: V (DC); Continuous load current: 8mA (DC) 5 LED operate current, ma LED turn off current, ma.5.5 LED turn off current, ma LED dropout voltage vs. ambient temperature LED current: 5 to 5 ma LED dropout voltage, V mA ma ma ma 5mA () Off state leakage current vs. load voltage Ambient temperature: 5 C 77 F - 8.-() Current vs. voltage of output at MOS portion Ambient temperature: 5 C 77 F Current, A Voltage, V () Off state leakage current vs. load voltage Ambient temperature: 5 C 77 F - 8.-() Current vs. voltage of output at MOS portion Ambient temperature: 5 C 77 F Current, ma Voltage, V () Turn on time vs. LED forward current Load voltage: V (DC); Continuous load current: ma (DC); Ambient temperature: 5 C 77 F.5 Leakage current, A -6-9 Leakage current, A Load voltage, V Load voltage, V () Turn on time vs. LED forward current Load voltage: V (DC); Continuous load current: 8mA (DC); Ambient temperature: 5 C 77 F..-() Turn off time vs. LED forward current Load voltage: V (DC); Continuous load current: ma (DC); Ambient temperature: 5 C 77 F.5.-() Turn off time vs. LED forward current Load voltage: V (DC); Continuous load current: 8mA (DC); Ambient temperature: 5 C 77 F ASCTBE 7-T
5 RF VSSOP Form A C R (AQY T).-() Output capacitance vs. applied voltage Frequency: MHz; Ambient temperature: 5 C 77 F 5.-() Output capacitance vs. applied voltage Frequency: MHz; Ambient temperature: 5 C 77 F Output capacitance, pf Output capacitance, pf Applied voltage, V 6 8 Applied voltage, V 5 ASCTBE 7-T
6
C R type SSOP package 60 V, 80 V and 100 V load voltage
C R type SSOP package 6 V, 8 V and V load voltage RF SSOP Form A C R (AQY V).65. RoHS compliant.5.75.8.7 mm inch FEATURES. Miniature SSOP package (Compared to SOP -pin models, volume ratio can be reduced
Miniature SOP6-pin type with high capacity of 3A load current
Miniature SOP6-pin type with high capacity of A load current HE SOP Form A High Capacity (AQV G S). 6..7.8..8 6 mm inch FEATURES. High capacity in a miniature SOP package Continuous load current: Max.
Flat Power-DIP4-pin type with high capacity up to 2A load current
Flat Power-DIP-pin type with high capacity up to A load current PD Form A (AQY7 ) 9.....9. 9.. (Height includes standoff)...7. mm inch FEATURES. Flat-Packaged type (W). (D) 9. (H).9 mm (W). (D). (H). inch.
Miniature SOP6-pin type Low on-resistance 200V/400V load voltage
Miniature SOP6-pin type Low on-resistance V/V load voltage RF SOP Form A Low on-resistance (AQV NS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP-pin package (W). (L) 6. (H). mm (W).7 (L).8
Miniature SOP4-pin type Low C R 60V/80V load voltage. FEATURES 1. Low capacitance and low on resistance (Load voltage: 60 to 80V)
() Miniature SOP4-pin type Low C R 6V/8V load voltage RF SOP Form A C R (AQY R S) 4.3 4.4.69.73..83 mm inch 4 3 RoHS compliant FEATURES. Low capacitance and low on resistance (Load voltage: 6 to 8V) capacitance
Approx. 25% Approx. 50% Footprint
Miniature SOP6-pin type of 6 to 6V load voltage GU SOP Form A (AQV S). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset
Capable of 2.4A to 3.5A high capacity load current control
Capable of.a to.a high capacity load current control HE Form A High Capacity (AQV G) 8.8.6 6...9. 8.8 6..6..6. (Height includes standoff) mm inch 6 FEATURES. Greatly increased load current in a compact
RF SOP 1 Form A C R10
RF SOP Form A C R (AQY S) Miniature SOP4-pin with C R 4V load voltage RF SOP Form A C R (AQY S) 4.3 4.4 4.3 4.4.69.73.69.73...83.83 mm inch 4 3 RoHS compliant FEATURES. Both low on-resistance
Small SOP4-pin type with short circuit protecting (Latch type)
Small SOP-pin type with short circuit protecting (Latch type) GU SOP Form A Short Circuit Protection (AQYKS)..69..7..8 mm inch FEATURES. Short circuit protection (Latch type) When the output current exceeds
Normally closed SOP6-pin type of 400V load voltage
Normally closed SOP6-pin type of V load voltage GU SOP Form B (AQVS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP6-pin package The device comes in a small SOP measuring (W). (L) 6. (H).
Normally closed DIP8-pin type of 400V load voltage. FEATURES 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units
Normally closed DIP8-pin type of V load voltage GU Form B (AQW) 9.78.8 6. 9.78 6...9.8..6.. (Height includes standoff) FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units
GU 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a DIP8-pin package GU Form A & Form B (AQW) 9.78.8... 9.78.8..9... (Height includes standoff) mm inch 8 N.C. 7 N.O. FEATURES. Approx. / the space compared with
DIP6-pin type with wide variation Low on-resistance
HF Form A (AQV, ) DIP-pin type with wide variation Low on-resistance HF Form A (AQV, ) 8.8....9. Height includes standoff 8.8..... mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely
Short circuit protection (Non-latch type) only for DC load
Short circuit protection (Non-latch type) only for DC load GU Form A Short Circuit Protection (AQVKL) 8.8 6.. 8.8 6..6.6..9.6.. (Height includes standoff) mm inch 6 + RoHS compliant FEATURES. Protects
High capacity up to 6A in a slim SIL package
High capacity up to A in a slim SIL package Power Form A High Capacity (AQZ G) New Height includes standoff.7....9 RoHS compliant mm inch Please check our website for the latest information regarding compliance
Slim type with high capacity up to 4A DC load type also available
Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ).7 + DC type....9 (Height includes standoff) mm inch RoHS compliant AC/DC type FEATURES. Slim SIL-pin package (W). (D).
Max. high capacity 10A in a slim SIL package
Max. high capacity A in a slim SIL package Power Form A DC High Capacity (AQZ9 )..9..77..7 + RoHS compliant Height includes standoff mm inch FEATURES. High capacity type power PhotoMOS. Can switch a wide
6-pin type for switching low-level analog signal
(Standard type) (Reinforced type) 6-pin type for switching low-level analog signal GU Form A (AQV, AQVH) TYPES AC/DC dual use 8.8.6 6.. 8.8.6 6...9..6. *Indicate the peak AC and DC values. Note: The surface
Space-saving SSOP 1 Form A type with built-in registor 40V load voltage
Space-saving SSOP Form A type with built-in registor V load voltage RF SSOP C R Voltage-sensitive (AQYF V).6...7.8.7 mm inch RoHS compliant FEATURES. Built-in input resistor means less man-hours when mounting
Compact DIP8-pin type of 60V to 600V load voltage
Compact DIP8-pin type of 6V to 6V load voltage GU Form (QW ) 6. 6. 9.78. 9.78..8.8.9.6.. (Height includes standoff) mm inch 8 7 6 RoHS compliant FETURES. Compact 8-pin DIP size The device comes in a compact
Slim type with high capacity up to 4A DC load type also available
VDE Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ) Height includes standoff.7 + + DC type + AC/DC type....9 RoHS compliant mm inch FEATURES. Slim SIL-pin package
Distributed by: www.jameco.com -8-8- The content and copyrights of the attached material are the property of its owner. High sensitivity and low on-resistance. DIP ( Form A) -pin type. HE PhotoMOS (AQV
Slim and high capacity up to 3.6A Voltage-driven type
Slim and high capacity up to 3.A Voltage-driven type Power 1 Form A Voltage-sensitive (AQZ1 D, D) 1 3.5 1.13.7 1.5.9 (Height includes standoff) mm inch + 3 1 3 DC type AC/DC type RoHS compliant FEATURES
GE 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a compact DIP8-pin Reinforced insulation (QWEH, EH) () GE Form & Form B (QW EH) 9.78. 9.78..8..8..9... (Height includes standoff) mm inch N.C. 8 7 N.O. RoHS
POWER PhotoMOS RELAYS 1-channel (Form A) Type FEATURES
POWER PhotoMOS RELAYS -channel (Form A) Type PhotoMOS RELAYS FEATURES ±..7±..±..±..±..9±. mm inch. High capacity PhotoMOS Relay in a compact and slim -pin SIL. Extremely low ON resistance. Control low-level
SUNSTAR 传感与控制 TEL: FAX: POWER PhotoMOS RELAYS (Voltage Sensitive Type) Photo
POWER PhotoMOS RELAYS (Voltage Sensitive Type) PhotoMOS RELAYS 1±..7±. FEATURES 3.5±..13±. 1.5±..9±. mm inch 1. A voltage sensitive power Photo- MOS relay Conventional power PhotoMOS relays are connected
RF (Radio Frequency) C R 10 SSOP Type
UL pending CSA pending RF (Radio Frequency) C R SSOP Type (by) PhotoMOS RELAYS FEATURES..7.8.7.6. mm inch. Reduced package size Lower surface has been reduced 6% and mounting space % compared to conventional
APT Phototriac Coupler
Phototriac coupler ideal for triac driver with wide variation VDE APT Phototriac Coupler ZC circuit ORDERING INFORMATION ON-state RMS :.5 A/. A RoHS compliant ZC APT : V function : With zero-cross function
8 PIN DIP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET
8 PIN DIP 4 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7141-1C FEATURES 2 CHANNEL TYPE: (1a + 1b output) LOW LED OPERATING CURRENT: IF = 2 ma DESIGNED FOR AC/DC SWITCHING LINE CHANGER
Phototriac Coupler (APT1)
Phototriac coupler ideal for triac driver with wide variation APT VDE Phototriac Coupler (APT) FEATURES. Low zero-cross voltage (max. 5 V) type added to lineup. Approximately / of previous product Helps
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET DESCRIPTION The is a solid state relay containing GaAs LEDs on the light emitting side (input
DATA SHEET. 6, 8-PIN DIP, 200 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET
DATA SHEET Solid State Relay OCMOS FET PS7122-1A-2A,PS7122L-1A,-2A 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7122-1A, -2A and PS7122L-1A, -2A are solid state
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The is an optically coupled element that combines a GaAs infrared LED
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
MOS FET Relays G3VM-21HR
MOS FET Relays GVM-HR Low -mω ON Resistance. High-power,.-A Switching with SOP Package. Continuous load current of. A (connection C = A). Dielectric strength of, Vrms between I/O. RoHS Compliant Application
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER Part No.: Product: Date: February 09, 2018 Page 1 of 18 Table of Contents: Introduction... 3 Absolute Maximum Rating... 6 Electrical Characteristic:
45 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 60V DC or Peak AC THT, SMD or SOP Tested in accordance with AEC-Q101, UL listed, RoHS Compliance Applications: Battery Management Systems,
MOS FET Relays G3VM-61G1
MOS FET Relays GVM-6G MOS FET Relay Designed for Switching Minute and Analog Signals, SOP Package. Upgraded GVM-S Series. Continuous load current of ma. Dielectric strength of,5 Vrms between I/O. RoHS
DATA SHEET. 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
DATA SHEET 4-PIN SOP,.6 Ω LOW ON-STATE RESISTANCE 6 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS726-1A NEPOC Series DESCRIPTION The PS726-1A is a low on-state
30 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 4V DC or peak AC, SMD or, Low Off-State Leakage Current, UL listed, RoHS Compliance Applications: Battery Management Systems, I/O Modules,
MOS FET Relays in DIP 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
4-pin, Type in 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay Load voltage: V, 4 V, 6 V, or V -V Relay: Continuous load current of A max. 4-V Relay:
8-PIN DIP, 250 V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7122A-1C,PS7122AL-1C DESCRIPTION 8-PIN DIP, V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1C and PS7122AL-1C are transfer
MOS FET Relays G3VM-41PR5
MOS FET Relays Smallest 4V MOS FET Relay In The Market (USOP Package); Designed to exhibit Low Output Capacitance and ON Resistance (C R = pf Ω) Specifically Designed for low ON resistance of Ω (typical).
8-PIN SOP, 260 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
8-PIN SOP, 26 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7221A-2A NEPOC Series DESCRIPTION The PS7221A-2A is a solid state relay containing
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A, -2A
NEC's HIGH SPEED (200 kbps) ANALOG OUTPUT TYPE 5 PIN SOP OPTOCOUPLER
FEATURES WIDE OPERATING VCC RANGE: VCC = -0.5 to +5 V HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s. HIGH-SPEED RESPONSE: tphl, tplh = 5 µs MAX (@RL = 4. kω) AVAILABLE IN TAPE AND REEL: -F3, F4 ELECTRICAL CHARACTERISTICS
MOS FET Relays in DIP 6-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) Low-ON-resistance GVM-@BR@/@ER@ -pin, High-current Type in -pin packages
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs
MOS FET Relays in SSOP packages that achieve a low C R
@ S, Low-output-capacitance and Low-ON-resistance Type (with Low C R) in S packages that achieve a low C R Load voltage: V : Low C R = 5 pf Ω, COFF (standard) = pf, RON (standard) = 5 Ω : Low C R =. pf
General-purpose MOS FET Relays in DIP packages for a wide range of applications
Introduction General-purpose High-load-voltage Multi-contact-pair (a, b, and ab), General-purpose Type General-purpose in packages for a wide range of applications Package: 4-pin or 6-pin Contact form:
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (3.4 pf Ω) 1-ch Optical Coupled MOS FET
DESCRIPTION The PS781M-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. An ultra small flat-lead package
Security equipment Industrial equipment Power circuit
, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product
MOS FET Relays G3VM-353H/H1
MOS FET Relays GVM-H/H Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts. General-purpose Series Added. New models in load voltage with SPST-NC contacts
PhotoIC Coupler (AlGaAs LED & PhotoIC)
0 Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS) New +..73..087.3.69 Vcc Vout GND mm inch 3 FEATURES. High speed Photo Coupler with receiver circuit IC. Capable of high speed communication (Transfer
LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package
SHENZHEN TENAND TECHNOLOGY CO.,LTD http://www.tenand.com LITE-ON TECHNOLOGY CORPORATION LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package Rev.A March2011 Description
USOP Package with Low Output Capacitance and ON Resistance
G3VM-PR@ U, Low-output-capacitance and Low-ON-resistance Type (with Low C R) U Package with Low Output Capacitance and ON Resistance : V : Low C R =.4 pf Ω, COFF (standard) =.8 pf, RON (standard) = 3 Ω
Property of LITE-ON Only ` Part No. LTV-217 / 227 / 247 Series Page : 1 of 16
FEATURES LITE-ON TECHNOLOGY CORPORATION ` * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-2X7 series ( Viso = 3.75KVrms ) * Employs
KAQW614 Series. cosmo 8PIN 400V N.O.+ N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two independent Form A and Form B SPST relays. The relay is constructed using a GaAlAs LED for actuation control and an integrated monolithic dies for the switch output.
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
DESCRIPTION 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7241E-1B NEPOC Series The PS7241E-1B is an optically coupled element that
KAQV414 Series. cosmo 6PIN 400V N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQV series is robust, ideal for telecom and ground fault applications. It is a SPST normally close switch ( Form B) that replaces electromechanical relays in many applications. It is constructed
KAQY214 Series. cosmo. 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output. Description. Schematic. Features. Application 1 FORM A NORMALLY OPEN
Description The KAQY series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch ( Form A) that replaces electromechanical relays in many applications. It is constructed
The highest class load current of MOS FET Relays realized with DIP8 package
GVM-@CR@/@FR@ DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, or V GVM-@CR@/@FR@ -V Relay:
6-PIN DIP, 400V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE
DESCRIPTION The PS7141E-1A and PS7141EL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal
Property of LITE-ON Only FEATURES
FEATURES * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-217/227/247 Series ( Viso = 3.75KVrms ) * Employs double transfer mold technology
Security equipment Industrial equipment Power circuit. 2. Contact form 1: 1a (SPST-NO) 3: 1b (SPST-NC)
, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product
KAQY214 Series 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output
Description The KAQY214 series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A,
8-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS716-2A,PS716L-2A 8-PIN DIP, 6 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS716-2A and PS716L-2A are solid state
Test & Measurement equipment Power circuit. 2. Contact form 1 : 1a (SPST-NO) terminals 40 : 400 V. 4. Additional functions R: Low ON resistance
DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, V, V, or V GVM-@CR@/@FR@ -V Relay: Continuous
Transistor Output SMALL OUTLINE OPTOISOLATORS TRANSISTOR OUTPUT SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit
Transistor Output These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic
DISCONTINUED PS7904-1A. Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
OCMOS FET 4-PIN SMALL FLAT-LEAD, LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET DESCRIPTION Preliminary Data Sheet The is a low output capacitance solid state relay containing a GaAs LED on the light
QT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN DC Input Phototransistor Part No.: QTH217 Product: QTH217 Date: April 12, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute Maximum Rating... 4 Electrical
KAQW212 Series. cosmo 8PIN 60V N.O. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two normally open switches that can be used as two independent SPST relays or as one DPST relay. The relay is constructed using a GaAlAs LED for actuation control and
MOS FET Relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) GVM-@HR -pin, High-current and Type in -pin packages that achieve the
HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
PhotoIC Coupler (AlGaAs LED & PhotoIC)
Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS, APS) New...87.3.69.73 mm inch Totem pole output Open drain output Vcc Vcc 5 Vout Vout 5 GND 3 GND 3 Truth table Truth table LED Output LED Output
KPC357NT Series 4PIN MINI-FLAT PHOTOTRANSISTOR PHOTOCOUPLER
4cosmo Description Schematic The KPC357 is DC-input single channel which 1contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin Mini-Flat 2package. The input-output
KPS28010T Series 4PIN SSOP LOW INPUT CURRENT PHOTOCOUPLER
Description The KPS28T series is DC-input single channel which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SSOP package. The input-output isolation
SDT450. DC Input Optocoupler DESCRIPTION ABSOLUTE MAXIMUM RATINGS* OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM APPROVALS PARAMETER UNIT MIN TYP MAX
DESCRIPTION The consists of a phototransistor optically coupled to a light emitting diode. Optical coupling between the input LED and output phototransistor allows for high isolation levels while maintaining
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1B, -2B and PS7122AL-1B, -2B are solid state
PHOTOCOUPLER PS2801A-1,PS2801A-4
PHOTOCOUPLER PS280-1,PS280-4 HIGH ISOLATION VOLTAGE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS280-1 and PS280-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN
NEC's HIGH CTR, 4 OR 16 PIN SOP OPTOCOUPLER
NEC's HIGH CTR, 4 OR 6 PIN SOP OPTOCOUPLER PS28- FEATURES HIGH CURRENT TRANSFER RATIO: CTR = 2% TYP @ IF = ma HIGH ISOLATION VOLTAGE: BV: 2.5 k Vr.m.s. SMALL THIN PACKAGE: 4, 6-pin SOP, Pin pitch.27 mm
GENERAL PURPOSE SOLID STATE RELAY 8PIN DIP 2-CHANNEL TYPE FORM A SSR
Schematic Features Compact 8-pin DIP size Applicable for 2 Form A use as well as two independent 1Form A use Controls low-level analog signals High sensitivity and high speed response Low-level off state
This part is now OBSOLETE 1/22/2009. Not Recommended for new designs
This part is now OBSOLETE 1/22/29 Not Recommended for new designs Data Sheet No. PD 163 reve Series PVY117 & PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open,
35@G@/35VY/4G@/4VY SOP 4-pin, General-purpose Type General-purpose in SOP 4-pin packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 35 V or 4 V RoHS Compliant
KPC354NT Series 4PIN MINI-FLAT PHOTOTRANSISTOR PHOTOCOUPLER
Description The KPC354 series of devices each consist of two infrared emitting diodes, connected in inverse parallel, optically coupled to a phototransistor detector. They are packaged in a 4-pin Mini-Flat
Security equipment Industrial equipment Power circuit. 1. Load Voltage 6 : 60 V 20 : 20 V 35 : 350 V 40 : 400 V
@J@ 8-pin, Multi-contact-pair Type in 8-pin packages with multiple contact pairs for a wide range of circuits Contact form: a (DPST-NO), b (DPST-NC), ab (SPST-NO/SPST-NC) Load voltage: 6 V, V, 35 V, or
DISCONTINUED. California Eastern Laboratories PS9817-1,-2. NEC's HIGH CMR, 10Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER DESCRIPTION NEC's and PS9817-2 are active-low type high-speed photocouplers that use a GaAlAs light-emitting diode
KPC355NT Series 4PIN MINI-FLAT PHOTODARLINGTON PHOTOCOUPLER
4 Description Schematic The KPC355NT series consist of a photodarlington 1optically coupled to a gallium arsenide infrared-emitting diodes in a 4-pin Mini-Flat package. The input-output 2isolation voltage
4 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER. EL101X-G Series. Features: Description. Applications
Features: Free halogens compliant Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) (CTR: 63~320% at I F =10mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Compact
NEC's HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER
NEC's HIGH CMR, 1 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN SSOP (SO-8) HIGH-SPEED OPTOCOUPLER PS9814-1,-2 DESCRIPTION NEC's PS9814-1 and PS9814-2 are active-low type highspeed optocouplers that use a GaAlAs
4N2X Series 4N3X Series H11AX Series 6 PIN DIP PHOTOTRANSISTOR PHOTOCOUPLER. Features: Description. Applications
Features: 4N2X series: 4N25, 4N26, 4N27, 4N28 4N3X series: 4N35, 4N36, 4N37, 4N38 H11AX series: H11A1, H11A2, H11A3, H11A4, H11A5 High isolation voltage between input and output (Viso=5000 V rms) Creepage
M54516P MITSUBISHI SEMICONDUCTOR <TRANSISTOR ARRAY> 5-UNIT 500mA DARLINGTON TRANSISTOR ARRAY
-UNIT DARLINGTON TRANSISTOR ARRAY DESCRIPTION is five-circuit Darlington transistor arrays. The circuits are made of NPN transistors. Both the semiconductor integrated circuits perform high-current driving
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS8741 FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
DESCRIPTION FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER PHOTOCOUPLER PS8741 NEPOC Series The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
Data Sheet ACPL-227 / ACPL-247. DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout
ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI PHOTOCOUPLER
DESCRIPTION PHOTOCOUPLER PS2732-1,PS2733-1 HIGH COLLECTOR TO EMITTER VOLTAGE SOP MULTI PHOTOCOUPLER NEPOC Series The PS2732-1 and PS2733-1 are optically coupled isolators containing a GaAs light emitting
PHOTOCOUPLER PS2805-1,PS2805-4
PHOTOCOUPLER PS2805-1,PS2805-4 HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE SSOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS2805-1 and PS2805-4 are optically coupled isolators containing GaAs light emitting