Miniature SOP4-pin type Low C R 60V/80V load voltage. FEATURES 1. Low capacitance and low on resistance (Load voltage: 60 to 80V)
|
|
|
- Asher Sparks
- 5 years ago
- Views:
Transcription
1 () Miniature SOP4-pin type Low C R 6V/8V load voltage RF SOP Form A C R (AQY R S) mm inch 4 3 RoHS compliant FEATURES. Low capacitance and low on resistance (Load voltage: 6 to 8V) capacitance (Cout) On resistance (Ron) Typ. 4.5pF Typ. 37.5pF Typ. 4.5pF Typ..8Ω Typ..8Ω Typ. Ω. Miniature SOP4-pin package (W)4.3 (L)4.4 (H). mm (W).69 (L).73 (H).83 inch 3. Low-level off-state leakage current of Typ.. na () 4. Controls low-level analog signals TYPICAL APPLICATIONS. Measuring and testing equipment IC tester, Liquid crystal driver tester, Semiconductor performance tester, Bare board tester, In-circuit tester, Function tester, etc.. Telecommunication and broadcasting equipment 3. Medical equipment 4. Multi-point recorder Data logger, Warping and Thermocouple, etc. TYPES AC/DC dual use rating* Load voltage Load current Package Tube packing style * Indicate the peak AC and DC values. Note: For space reasons, the three initial letters of the part number AQY, the package (SOP) indicator S and the packing style indicator X or Z are not marked on the device. (Ex. the label for product number X is R) RATING. Absolute maximum ratings () Part No. Tape and reel packing style Picked from the /-pin side Picked from the 3/4-pin side 6V.5A X Z tube contains: 8V.35A pcs. SOP4-pin X Z batch contains: 8V.5A X Z, pcs. Tube Packing quantity Item Symbol Remarks LED forward current IF 5mA LED reverse voltage VR 5V Peak forward current IFP A f= Hz, Duty factor=.% Power dissipation Pin 75mW Load voltage (peak AC) VL 6V 8V Continuous load current IL.5A.35A.5A Peak AC, DC Peak load current Ipeak A.7A.45A ms ( shot), VL= DC Power dissipation Pout 3mW Total power dissipation PT 35mW I/O isolation voltage Viso,5Vrms Ambient temperature Tape and reel Operating Topr 4 to +85 C 4 to +85 F (Non-icing at low temperatures) Storage Tstg 4 to + C 4 to + F, pcs. ASCTB55E 73-T
2 RF SOP Form A C R (AQY R S). Electrical () Item Symbol Condition Transfer LED operate current LED turn off current LED dropout voltage On resistance capacitance Off state leakage current Turn on time** Turn off time** *Available as custom orders ( na or less) Minimum IFon IFoff VF.5 ma 3. ma. ma.45 ma.3 V (.4 V at IF = 5 ma) V IL = Max. IL = Max. IF = 5 ma.8ω Ω IF = 5 ma Ron.Ω 5Ω IL = Max. 4.5 pf 37.5 pf 4.5 pf IF = ma, f = MHz, VB = V Cout (amplitude of 3mV) 3 pf 45 pf 6. pf Measured from s onward after application ILeak.5 na.3 na. na IF = ma * na VL = Max..5 ms.5 ms.5 ms IF = 5 ma Ton VL = V.5ms.75ms.5ms RL = Ω Toff.6 ms.8 ms.5 ms IF = 5 ma VL = V. ms RL = Ω.8 pf f = MHz I/O capacitance Ciso pf VB = V Initial I/O isolation resistance Minimum Riso,MΩ 5 V DC **Turn on/turn off time 9% % Ton Toff 3. Recommended operating conditions () Please use under recommended operating conditions to obtain expected. Item Symbol Min. Max. Unit LED current IF 5 3 ma Load voltage (Peak AC) VL 3 V Continuous load current IL.5 A Load voltage (Peak AC) VL 4 V Continuous load current IL.35 A Load voltage (Peak AC) VL 4 V Continuous load current IL.5 A These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Corporation technical representative. ASCTB55E 73-T
3 RF SOP Form A C R (AQY R S) REFERENCE DATA. Load current vs. ambient temperature Allowable ambient temperature: 4 to +85 C 4 to +85 F 6.-() On resistance vs. ambient temperature LED current: 5 ma; Load voltage: Max. (DC).-() On resistance vs. ambient temperature LED current: 5 ma; Load voltage: Max. (DC) 5 Load current, ma On resistance, Ω.5 On resistance, Ω Turn on time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC) Continuous load current: ma (DC).5 4. Turn off time vs. ambient temperature LED current: 5 ma; Load voltage: V (DC) Continuous load current: ma (DC).5 5. LED operate current vs. ambient temperature Load voltage: Max. (DC) Turn on time, ms Turn off time, ms LED operate current, ma LED turn off current vs. ambient temperature Load voltage: Max. (DC) LED turn off current, ma () Current vs. voltage of Current, A 7. LED dropout voltage vs. ambient temperature LED current: 5 to 5 ma LED dropout voltage, V mA 3mA ma ma 5mA 8.-(3) Current vs. voltage of Current, ma 8.-() Current vs. voltage of Current, A 9. Off state leakage current vs. load voltage Off state leakage current, A Load voltage, V 3 ASCTB55E 73-T
4 RF SOP Form A C R (AQY R S). Turn on time vs. LED forward current Load voltage: V (DC) Continuous load current: ma (DC).5. Turn off time vs. LED forward current Load voltage: V (DC) Continuous load current: ma (DC).5.-() capacitance vs. applied voltage Frequency: MHz, 3mVrms 5 Turn on time, ms LED forward current, ma Turn off time, ms LED forward current, ma 6 capacitance, pf Applied voltage, V.-() capacitance vs. applied voltage Frequency: MHz, 3mVrms capacitance, pf Applied voltage, V 4 ASCTB55E 73-T
5
C R type SSOP package 60 V, 80 V and 100 V load voltage
C R type SSOP package 6 V, 8 V and V load voltage RF SSOP Form A C R (AQY V).65. RoHS compliant.5.75.8.7 mm inch FEATURES. Miniature SSOP package (Compared to SOP -pin models, volume ratio can be reduced
RF VSSOP 1 Form A C R
C R type VSSOP package 6V and V load voltage RF VSSOP Form A C R (AQY T).8.7.9...8 mm inch FEATURES. Miniature VSSOP package.6 mm mounting area achieved. Approx. 9% less than previous product (SON type).
RF SOP 1 Form A C R10
RF SOP Form A C R (AQY S) Miniature SOP4-pin with C R 4V load voltage RF SOP Form A C R (AQY S) 4.3 4.4 4.3 4.4.69.73.69.73...83.83 mm inch 4 3 RoHS compliant FEATURES. Both low on-resistance
Miniature SOP6-pin type Low on-resistance 200V/400V load voltage
Miniature SOP6-pin type Low on-resistance V/V load voltage RF SOP Form A Low on-resistance (AQV NS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP-pin package (W). (L) 6. (H). mm (W).7 (L).8
Flat Power-DIP4-pin type with high capacity up to 2A load current
Flat Power-DIP-pin type with high capacity up to A load current PD Form A (AQY7 ) 9.....9. 9.. (Height includes standoff)...7. mm inch FEATURES. Flat-Packaged type (W). (D) 9. (H).9 mm (W). (D). (H). inch.
Miniature SOP6-pin type with high capacity of 3A load current
Miniature SOP6-pin type with high capacity of A load current HE SOP Form A High Capacity (AQV G S). 6..7.8..8 6 mm inch FEATURES. High capacity in a miniature SOP package Continuous load current: Max.
Approx. 25% Approx. 50% Footprint
Miniature SOP6-pin type of 6 to 6V load voltage GU SOP Form A (AQV S). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset
Capable of 2.4A to 3.5A high capacity load current control
Capable of.a to.a high capacity load current control HE Form A High Capacity (AQV G) 8.8.6 6...9. 8.8 6..6..6. (Height includes standoff) mm inch 6 FEATURES. Greatly increased load current in a compact
Space-saving SSOP 1 Form A type with built-in registor 40V load voltage
Space-saving SSOP Form A type with built-in registor V load voltage RF SSOP C R Voltage-sensitive (AQYF V).6...7.8.7 mm inch RoHS compliant FEATURES. Built-in input resistor means less man-hours when mounting
Small SOP4-pin type with short circuit protecting (Latch type)
Small SOP-pin type with short circuit protecting (Latch type) GU SOP Form A Short Circuit Protection (AQYKS)..69..7..8 mm inch FEATURES. Short circuit protection (Latch type) When the output current exceeds
Normally closed SOP6-pin type of 400V load voltage
Normally closed SOP6-pin type of V load voltage GU SOP Form B (AQVS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP6-pin package The device comes in a small SOP measuring (W). (L) 6. (H).
DIP6-pin type with wide variation Low on-resistance
HF Form A (AQV, ) DIP-pin type with wide variation Low on-resistance HF Form A (AQV, ) 8.8....9. Height includes standoff 8.8..... mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely
Normally closed DIP8-pin type of 400V load voltage. FEATURES 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units
Normally closed DIP8-pin type of V load voltage GU Form B (AQW) 9.78.8 6. 9.78 6...9.8..6.. (Height includes standoff) FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units
GU 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a DIP8-pin package GU Form A & Form B (AQW) 9.78.8... 9.78.8..9... (Height includes standoff) mm inch 8 N.C. 7 N.O. FEATURES. Approx. / the space compared with
Short circuit protection (Non-latch type) only for DC load
Short circuit protection (Non-latch type) only for DC load GU Form A Short Circuit Protection (AQVKL) 8.8 6.. 8.8 6..6.6..9.6.. (Height includes standoff) mm inch 6 + RoHS compliant FEATURES. Protects
High capacity up to 6A in a slim SIL package
High capacity up to A in a slim SIL package Power Form A High Capacity (AQZ G) New Height includes standoff.7....9 RoHS compliant mm inch Please check our website for the latest information regarding compliance
6-pin type for switching low-level analog signal
(Standard type) (Reinforced type) 6-pin type for switching low-level analog signal GU Form A (AQV, AQVH) TYPES AC/DC dual use 8.8.6 6.. 8.8.6 6...9..6. *Indicate the peak AC and DC values. Note: The surface
Max. high capacity 10A in a slim SIL package
Max. high capacity A in a slim SIL package Power Form A DC High Capacity (AQZ9 )..9..77..7 + RoHS compliant Height includes standoff mm inch FEATURES. High capacity type power PhotoMOS. Can switch a wide
Slim type with high capacity up to 4A DC load type also available
Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ).7 + DC type....9 (Height includes standoff) mm inch RoHS compliant AC/DC type FEATURES. Slim SIL-pin package (W). (D).
Compact DIP8-pin type of 60V to 600V load voltage
Compact DIP8-pin type of 6V to 6V load voltage GU Form (QW ) 6. 6. 9.78. 9.78..8.8.9.6.. (Height includes standoff) mm inch 8 7 6 RoHS compliant FETURES. Compact 8-pin DIP size The device comes in a compact
Slim type with high capacity up to 4A DC load type also available
VDE Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ) Height includes standoff.7 + + DC type + AC/DC type....9 RoHS compliant mm inch FEATURES. Slim SIL-pin package
Distributed by: www.jameco.com -8-8- The content and copyrights of the attached material are the property of its owner. High sensitivity and low on-resistance. DIP ( Form A) -pin type. HE PhotoMOS (AQV
GE 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a compact DIP8-pin Reinforced insulation (QWEH, EH) () GE Form & Form B (QW EH) 9.78. 9.78..8..8..9... (Height includes standoff) mm inch N.C. 8 7 N.O. RoHS
POWER PhotoMOS RELAYS 1-channel (Form A) Type FEATURES
POWER PhotoMOS RELAYS -channel (Form A) Type PhotoMOS RELAYS FEATURES ±..7±..±..±..±..9±. mm inch. High capacity PhotoMOS Relay in a compact and slim -pin SIL. Extremely low ON resistance. Control low-level
Slim and high capacity up to 3.6A Voltage-driven type
Slim and high capacity up to 3.A Voltage-driven type Power 1 Form A Voltage-sensitive (AQZ1 D, D) 1 3.5 1.13.7 1.5.9 (Height includes standoff) mm inch + 3 1 3 DC type AC/DC type RoHS compliant FEATURES
RF (Radio Frequency) C R 10 SSOP Type
UL pending CSA pending RF (Radio Frequency) C R SSOP Type (by) PhotoMOS RELAYS FEATURES..7.8.7.6. mm inch. Reduced package size Lower surface has been reduced 6% and mounting space % compared to conventional
SUNSTAR 传感与控制 TEL: FAX: POWER PhotoMOS RELAYS (Voltage Sensitive Type) Photo
POWER PhotoMOS RELAYS (Voltage Sensitive Type) PhotoMOS RELAYS 1±..7±. FEATURES 3.5±..13±. 1.5±..9±. mm inch 1. A voltage sensitive power Photo- MOS relay Conventional power PhotoMOS relays are connected
APT Phototriac Coupler
Phototriac coupler ideal for triac driver with wide variation VDE APT Phototriac Coupler ZC circuit ORDERING INFORMATION ON-state RMS :.5 A/. A RoHS compliant ZC APT : V function : With zero-cross function
Phototriac Coupler (APT1)
Phototriac coupler ideal for triac driver with wide variation APT VDE Phototriac Coupler (APT) FEATURES. Low zero-cross voltage (max. 5 V) type added to lineup. Approximately / of previous product Helps
8 PIN DIP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET
8 PIN DIP 4 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7141-1C FEATURES 2 CHANNEL TYPE: (1a + 1b output) LOW LED OPERATING CURRENT: IF = 2 ma DESIGNED FOR AC/DC SWITCHING LINE CHANGER
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET DESCRIPTION The is a solid state relay containing GaAs LEDs on the light emitting side (input
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
DATA SHEET. 6, 8-PIN DIP, 200 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET
DATA SHEET Solid State Relay OCMOS FET PS7122-1A-2A,PS7122L-1A,-2A 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7122-1A, -2A and PS7122L-1A, -2A are solid state
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The is an optically coupled element that combines a GaAs infrared LED
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
MOS FET Relays G3VM-21HR
MOS FET Relays GVM-HR Low -mω ON Resistance. High-power,.-A Switching with SOP Package. Continuous load current of. A (connection C = A). Dielectric strength of, Vrms between I/O. RoHS Compliant Application
MOS FET Relays G3VM-61G1
MOS FET Relays GVM-6G MOS FET Relay Designed for Switching Minute and Analog Signals, SOP Package. Upgraded GVM-S Series. Continuous load current of ma. Dielectric strength of,5 Vrms between I/O. RoHS
8-PIN DIP, 250 V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7122A-1C,PS7122AL-1C DESCRIPTION 8-PIN DIP, V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1C and PS7122AL-1C are transfer
DATA SHEET. 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
DATA SHEET 4-PIN SOP,.6 Ω LOW ON-STATE RESISTANCE 6 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS726-1A NEPOC Series DESCRIPTION The PS726-1A is a low on-state
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER Part No.: Product: Date: February 09, 2018 Page 1 of 18 Table of Contents: Introduction... 3 Absolute Maximum Rating... 6 Electrical Characteristic:
8-PIN SOP, 260 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
8-PIN SOP, 26 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7221A-2A NEPOC Series DESCRIPTION The PS7221A-2A is a solid state relay containing
45 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 60V DC or Peak AC THT, SMD or SOP Tested in accordance with AEC-Q101, UL listed, RoHS Compliance Applications: Battery Management Systems,
MOS FET Relays G3VM-41PR5
MOS FET Relays Smallest 4V MOS FET Relay In The Market (USOP Package); Designed to exhibit Low Output Capacitance and ON Resistance (C R = pf Ω) Specifically Designed for low ON resistance of Ω (typical).
USOP Package with Low Output Capacitance and ON Resistance
G3VM-PR@ U, Low-output-capacitance and Low-ON-resistance Type (with Low C R) U Package with Low Output Capacitance and ON Resistance : V : Low C R =.4 pf Ω, COFF (standard) =.8 pf, RON (standard) = 3 Ω
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A, -2A
30 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 4V DC or peak AC, SMD or, Low Off-State Leakage Current, UL listed, RoHS Compliance Applications: Battery Management Systems, I/O Modules,
MOS FET Relays in SSOP packages that achieve a low C R
@ S, Low-output-capacitance and Low-ON-resistance Type (with Low C R) in S packages that achieve a low C R Load voltage: V : Low C R = 5 pf Ω, COFF (standard) = pf, RON (standard) = 5 Ω : Low C R =. pf
MOS FET Relays in DIP 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
4-pin, Type in 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay Load voltage: V, 4 V, 6 V, or V -V Relay: Continuous load current of A max. 4-V Relay:
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs
Security equipment Industrial equipment Power circuit. 2. Contact form 1: 1a (SPST-NO) 3: 1b (SPST-NC)
, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product
Security equipment Industrial equipment Power circuit
, General-purpose Type General-purpose in packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 6 V RoHS Compliant Application Examples Note: The actual product
LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package
SHENZHEN TENAND TECHNOLOGY CO.,LTD http://www.tenand.com LITE-ON TECHNOLOGY CORPORATION LTV-200/205/206/207/208 Optocouplers, Phototransistor Output, Dual Channel, SOP8 Package Rev.A March2011 Description
MOS FET Relays G3VM-353H/H1
MOS FET Relays GVM-H/H Analog-switching MOS FET Relay with SPST-NC (Single-pole, Single-throw, Normally Closed) Contacts. General-purpose Series Added. New models in load voltage with SPST-NC contacts
NEC's HIGH SPEED (200 kbps) ANALOG OUTPUT TYPE 5 PIN SOP OPTOCOUPLER
FEATURES WIDE OPERATING VCC RANGE: VCC = -0.5 to +5 V HIGH ISOLATION VOLTAGE: BV: 2500 Vr.m.s. HIGH-SPEED RESPONSE: tphl, tplh = 5 µs MAX (@RL = 4. kω) AVAILABLE IN TAPE AND REEL: -F3, F4 ELECTRICAL CHARACTERISTICS
MOS FET Relays in DIP 6-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) Low-ON-resistance GVM-@BR@/@ER@ -pin, High-current Type in -pin packages
PhotoIC Coupler (AlGaAs LED & PhotoIC)
0 Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS) New +..73..087.3.69 Vcc Vout GND mm inch 3 FEATURES. High speed Photo Coupler with receiver circuit IC. Capable of high speed communication (Transfer
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (3.4 pf Ω) 1-ch Optical Coupled MOS FET
DESCRIPTION The PS781M-1A is a low output capacitance solid state relay containing a GaAs LED on the light emitting side (input side) and MOS FETs on the output side. An ultra small flat-lead package
General-purpose MOS FET Relays in DIP packages for a wide range of applications
Introduction General-purpose High-load-voltage Multi-contact-pair (a, b, and ab), General-purpose Type General-purpose in packages for a wide range of applications Package: 4-pin or 6-pin Contact form:
This part is now OBSOLETE 1/22/2009. Not Recommended for new designs
This part is now OBSOLETE 1/22/29 Not Recommended for new designs Data Sheet No. PD 163 reve Series PVY117 & PbF Microelectronic Power IC HEXFET Power MOSFET Photovoltaic Relay Single-Pole, Normally-Open,
The highest class load current of MOS FET Relays realized with DIP8 package
GVM-@CR@/@FR@ DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, or V GVM-@CR@/@FR@ -V Relay:
M54123L EARTH LEAKAGE CURRENT DETECTOR LINEAR INTEGRATED CIRCUIT SOP-8 DESCRIPTION DIP-8 SIP-8 FEATURES ORDERING INFORMATION
EARTH LEAKAGE CURRENT DETECTOR SOP- DESCRIPTION The UTC M51L is a semiconductor integrated circuit with amplifier for a high-speed earth leakage circuit breaker. For the amplifying parts of earth leakage
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
DESCRIPTION 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7241E-1B NEPOC Series The PS7241E-1B is an optically coupled element that
Test & Measurement equipment Power circuit. 2. Contact form 1 : 1a (SPST-NO) terminals 40 : 400 V. 4. Additional functions R: Low ON resistance
DIP -pin, High-Current and Low-ON-resistance Type DIP The highest class load current of realized with DIP package Contact form: a (SPST-NO) Load voltage: V, V, V, V, or V GVM-@CR@/@FR@ -V Relay: Continuous
PhotoIC Coupler (AlGaAs LED & PhotoIC)
Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS, APS) New...87.3.69.73 mm inch Totem pole output Open drain output Vcc Vcc 5 Vout Vout 5 GND 3 GND 3 Truth table Truth table LED Output LED Output
KAQW614 Series. cosmo 8PIN 400V N.O.+ N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two independent Form A and Form B SPST relays. The relay is constructed using a GaAlAs LED for actuation control and an integrated monolithic dies for the switch output.
Transistor Output SMALL OUTLINE OPTOISOLATORS TRANSISTOR OUTPUT SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit
Transistor Output These devices consist of a gallium arsenide infrared emitting diode optically coupled to a monolithic silicon phototransistor detector, in a surface mountable, small outline, plastic
6-PIN DIP, 400V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE
DESCRIPTION The PS7141E-1A and PS7141EL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal
KAQV414 Series. cosmo 6PIN 400V N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQV series is robust, ideal for telecom and ground fault applications. It is a SPST normally close switch ( Form B) that replaces electromechanical relays in many applications. It is constructed
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A,
Property of LITE-ON Only ` Part No. LTV-217 / 227 / 247 Series Page : 1 of 16
FEATURES LITE-ON TECHNOLOGY CORPORATION ` * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-2X7 series ( Viso = 3.75KVrms ) * Employs
8-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS716-2A,PS716L-2A 8-PIN DIP, 6 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS716-2A and PS716L-2A are solid state
MOS FET Relays in SOP 6-pin packages that achieve the low ON resistance and high switching capacitance of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) GVM-@HR -pin, High-current and Type in -pin packages that achieve the
KAQY214 Series. cosmo. 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output. Description. Schematic. Features. Application 1 FORM A NORMALLY OPEN
Description The KAQY series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch ( Form A) that replaces electromechanical relays in many applications. It is constructed
GENERAL PURPOSE SOLID STATE RELAY 8PIN DIP 2-CHANNEL TYPE FORM A SSR
Schematic Features Compact 8-pin DIP size Applicable for 2 Form A use as well as two independent 1Form A use Controls low-level analog signals High sensitivity and high speed response Low-level off state
35@G@/35VY/4G@/4VY SOP 4-pin, General-purpose Type General-purpose in SOP 4-pin packages for a wide range of applications Contact form: a (SPST-NO) or b (SPST-NC) Load voltage: 35 V or 4 V RoHS Compliant
LH1505AB/ AAC/ AACTR. Pb Pb-free. Dual 1 Form A Solid State Relay. Vishay Semiconductors
LH155AB/ AAC/ AACTR Dual 1 Form A Solid State Relay Features Two Independent Relays Current Limit Protection Isolation Test Voltage 53 V RMS Typical R ON 15 Ω Load Voltage 25 V Load Current 12 ma High
KAQW212 Series. cosmo 8PIN 60V N.O. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two normally open switches that can be used as two independent SPST relays or as one DPST relay. The relay is constructed using a GaAlAs LED for actuation control and
Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half Pitch Mini-Flat Package
TCMT6, TCMT46 Series Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, Single/Quad Channel, Half FEATURES Low profile package (half pitch) AC isolation test voltage 375 V RMS Low coupling
Property of LITE-ON Only FEATURES
FEATURES * Current transfer ratio ( CTR : MIN. 50% at I F = 5mA, V CE = 5V ) * Isolation voltage between input and output LTV-217/227/247 Series ( Viso = 3.75KVrms ) * Employs double transfer mold technology
6, 8-PIN DIP, 250 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET
DESCRIPTION Solid State Relay OCMOS FET 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1B, -2B and PS7122AL-1B, -2B are solid state
QT-Brightek Optocoupler Series
QT-Brightek Optocoupler Series 4-PIN DC Input Phototransistor Part No.: QTH217 Product: QTH217 Date: April 12, 2018 Page 1 of 13 Table of Contents: Introduction... 3 Absolute Maximum Rating... 4 Electrical
Security equipment Industrial equipment Power circuit. 1. Load Voltage 6 : 60 V 20 : 20 V 35 : 350 V 40 : 400 V
@J@ 8-pin, Multi-contact-pair Type in 8-pin packages with multiple contact pairs for a wide range of circuits Contact form: a (DPST-NO), b (DPST-NC), ab (SPST-NO/SPST-NC) Load voltage: 6 V, V, 35 V, or
NEC's HIGH CTR, 4 OR 16 PIN SOP OPTOCOUPLER
NEC's HIGH CTR, 4 OR 6 PIN SOP OPTOCOUPLER PS28- FEATURES HIGH CURRENT TRANSFER RATIO: CTR = 2% TYP @ IF = ma HIGH ISOLATION VOLTAGE: BV: 2.5 k Vr.m.s. SMALL THIN PACKAGE: 4, 6-pin SOP, Pin pitch.27 mm
KAQY214 Series 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output
Description The KAQY214 series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch (1 Form A) that replaces electromechanical relays in many applications. It is
HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER
DESCRIPTION HIGH ISOLATION VOLTAGE 4-PIN SOP PHOTOCOUPLER PHOTOCOUPLER NEPOC Series The is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor. This
Description. Kingbright
1.6X0.8mm INFRARED EMITTING DIODE Part Number: KP-1608F3C Features 1.6mmX0.8mm SMT LED, 1.1mm thickness. Mechanically and spectrally matched to the phototransistor. Package: 2000pcs / reel. Moisture sensitivity
4 PIN LONG CREEPAGE SOP PHOTOTRANSISTOR PHOTOCOUPLER. EL101X-G Series. Features: Description. Applications
Features: Free halogens compliant Current transfer ratio (CTR: 50~600% at I F =5mA, V CE =5V) (CTR: 63~320% at I F =10mA, V CE =5V) High isolation voltage between input and output (Viso=5000 V rms ) Compact
SDT450. DC Input Optocoupler DESCRIPTION ABSOLUTE MAXIMUM RATINGS* OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM APPROVALS PARAMETER UNIT MIN TYP MAX
DESCRIPTION The consists of a phototransistor optically coupled to a light emitting diode. Optical coupling between the input LED and output phototransistor allows for high isolation levels while maintaining
SPEC NO: DSAF1339 REV NO: V.9B DATE: NOV/10/2015 PAGE: 1 OF 6 APPROVED:
3.2x2.4mm SMD CHIP LED LAMP Part Number: APBD3224SYKCGKC-F01 Features 3.2x2.4mm SMD LED, 2.4mm thickness. Low power consumption. Ideal for backlight and indicator. Package : 1500pcs / reel. Moisture sensitivity
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
PHOTOCOUPLER PS8741 FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER NEPOC Series DESCRIPTION The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER
DESCRIPTION FOR OPTICAL DAA, HIGH LINEAR 16-PIN SOP PHOTOCOUPLER PHOTOCOUPLER PS8741 NEPOC Series The PS8741 is an optically coupled isolator containing a GaAs LED on the input side and two photodiodes
Product: Q814 Date: February 1, 2011 Page 1 of 13 Version# 1.2
Feature: High Isolation voltage between input and output (Viso = 5000V rms) Current transfer ration (CTR: Min. 20% at I F = ±1mA, V ce =5V) High collector-emitter voltage V CEO =80V Operating Temperature
KPS28010T Series 4PIN SSOP LOW INPUT CURRENT PHOTOCOUPLER
Description The KPS28T series is DC-input single channel which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SSOP package. The input-output isolation
DISCONTINUED PS7904-1A. Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
OCMOS FET 4-PIN SMALL FLAT-LEAD, LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET DESCRIPTION Preliminary Data Sheet The is a low output capacitance solid state relay containing a GaAs LED on the light
Data Sheet ACPL-227 / ACPL-247. DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler. Description. Features. ACPL-227 pin layout
ACPL-227 / ACPL-247 DC Input Multi-Channel Half-Pitch Phototransistor Optocoupler Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxe denotes a lead-free product
AT mA LED Driver w/ Internal Switch
FEATURES Up to 95% Efficiency 0.1V Current Sense Threshold Voltage 5V to 36V Input Voltage Range Driving up to 30LEDs (1W 10S3P) at DC36V IN Up to 1MHz Oscillation Frequency Continuous 1A Output Capability
ISOCOM ICPL2530, ICPL2531 COMPONENTS DESCRIPTION ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION
DESCRIPTION The and dual channel devices each consists of an infrared emitting diode, optically coupled to a high speed photo detector transistor. A separate connection for the photodiode bias and output
Descriptions. Kingbright
3.5x2.8mm SURFACE MOUNT LED LAMP Part Number: Features Both chips can be controlled separately. Suitable for all SMD assembly and solder process. Available on tape and reel. Package: 2000pcs / reel. Moisture
ISOCOM IS127 COMPONENTS FPH1 IYWW DESCRIPTION FEATURES ABSOLUTE MAXIMUM RATINGS APPLICATIONS ORDER INFORMATION
DESCRIPTION The is an optically coupled isolator consisting of an infrared light emitting diodeand a high voltage NPN silicon photo darlington which has an integral baseemitter resistor to optimise switching