POWER PhotoMOS RELAYS 1-channel (Form A) Type FEATURES
|
|
|
- Millicent Hensley
- 6 years ago
- Views:
Transcription
1 POWER PhotoMOS RELAYS -channel (Form A) Type PhotoMOS RELAYS FEATURES ±..7±..±..±..±..9±. mm inch. High capacity PhotoMOS Relay in a compact and slim -pin SIL. Extremely low ON resistance. Control low-level signal Power Photo MOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion.. Low-level off state leakage current. High I/O isolation voltage, V. Eliminates the need for a counter electromotive protection diode in the drive circuit on the input side 7. Eliminate the need for a power supply to drive the power MOSFET. PC board layout is simplified 9. No restriction on mounting direction. Varistor incorporated type is also available. TYPICAL APPLICATIONS High- inspection machines IC checker NC machine, Robots Office machines Telecommunication Automotive Industrial control TYPES. AC/DC type. DC type rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton V. A AQZ V. A AQZ V. A AQZ7 V. A AQZ Notes: Load voltage and current of AC/DC type: Peak AC/DC. Load voltage and current of DC type: DC pcs. pcs. rating Packing quantity Part No. Load voltage Load current Inner carton Outer carton V. A AQZ V. A AQZ V. A AQZ7 V.7 A AQZ pcs. pcs. 7
2 AQZ, RATING. AC/DC type ) Absolute maximum ratings () Item Symbol AQZ AQZ AQZ7 AQZ Remarks LED forward current IF ma LED reverse voltage VR V Peak forward current IFP A f = Hz, Duty factor =.% Power dissipation Pin 7 mw Load voltage (Peak AC) VL V V V V Continuous load current IL. A. A. A. A Peak load current Ipeak 9. A. A. A. A ms ( shot), VL = DC Power dissipation Pout. W Total power dissipation PT. W I/O isolation voltage Viso, V AC Temperature Operating Topr C to + C F to + F Non-condensing at low temperatures limits Storage Tstg C to + C F to + F ) Electrical () Item Symbol AQZ AQZ AQZ7 AQZ Condition LED operate current. ma IL= ma IFon. ma VL= V LED turn off current Minimum. ma IL= ma IFoff.9 ma VL= V LED dropout voltage. V (. V at IF = ma) VF. V IF = ma. Ω. Ω.7 Ω. Ω IF = ma On resistance Ron IL =Max.. Ω. Ω. Ω. Ω Within s on time Off state leakage current µa IF = VL = Max.. ms. ms. ms. ms IF = ma IL = ma. ms VL = V Turn on time* Switching. ms. ms.7 ms. ms IF = ma IL = ma. ms VL = V Transfer I/O capacitance Initial I/O isolation resistance Turn off time* operating Ciso. ms. ms. ms. ms IF = ma or ma IL = ma. ms VL = V. pf f = MHz. pf VB = Minimum Riso, MΩ V DC. cps IF = ma Duty factor = % IL = Max., VL = Max. Vibration resistance Minimum to Hz at double amplitude of mm hours for axes Shock resistance Minimum,9 m/s { G} ms times for axes Note: Recommendable LED forward current IF= to ma. *Turn on/off time 9% %
3 Transfer Vibration resistance Minimum to Hz at double amplitude of mm hours for axes Shock resistance Minimum,9 m/s { G} ms times for axes Note: Recommendable LED forward current IF= to ma. *Turn on/off time AQZ,. DC type ) Absolute maximum ratings () Item Symbol AQZ AQZ AQZ7 AQZ Remarks LED forward current IF ma LED reverse voltage VR V Peak forward current IFP A f = Hz, Duty factor =.% Power dissipation Pin 7 mw Load voltage (DC) VL V V V V Continuous load current (DC) IL. A. A. A.7 A Peak load current Ipeak 9. A. A. A. A ms ( shot), VL = DC Power dissipation Pout. W Total power dissipation PT. W I/O isolation voltage Viso, V AC Temperature Operating Topr C to + C F to + F Non-condensing at low temperatures limits Storage Tstg C to + C F to + F ) Electrical () Item Symbol AQZ AQZ AQZ7 AQZ Condition LED operate current. ma IL= ma IFon. ma VL= V LED turn off current Minimum. ma IL= ma IFoff.9 ma VL= V LED dropout voltage. V (. V at IF = ma) VF. V IF = ma. Ω. Ω. Ω. Ω IF = ma On resistance Ron IL =Max..9 Ω.7 Ω. Ω. Ω Within s on time Off state leakage current µa IF = VL = Max.. ms.9 ms. ms. ms IF = ma IL = ma. ms VL = V Turn on time* Switching.79 ms. ms.7 ms. ms IF = ma IL = ma. ms VL = V I/O capacitance Turn off time* Initial I/O isolation resistance operating Ciso. ms.9 ms. ms. ms IF = ma or ma IL = ma. ms VL = V. pf f = MHz. pf VB = Minimum Riso, MW V DC. cps IF = ma Duty factor = % IL x VL= (VA) 9% % For Dimensions, see Page. For Schematic and Wiring Diagrams, see Page. For Cautions for Use, see Page. 9
4 AQZ, REFERENCE DATA.-() Load current vs. ambient temperature Allowable ambient temperature: C to + C F to + F AQZ AQZ7 AQZ AQZ.-() On resistance vs. ambient temperature LED current: ma; Continuous load current:. A (DC) (AQZ),. A (DC) (AQZ),. A (DC) (AQZ),. A (DC) (AQZ). On resistance, Ω.... AQZ AQZ AQZ AQZ.-() Turn on time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC).-() Load current vs. ambient temperature Allowable ambient temperature: C to + C F to + F... AQZ.. AQZ.. AQZ7.. AQZ.-() On resistance vs. ambient temperature LED current: ma; Continuous load current:. A (DC) (AQZ7),. A (DC) (AQZ),. A (DC) (AQZ7),. A (DC) (AQZ) On resistance, Ω... AQZ.... AQZ... AQZ7 AQZ7.-() Turn off time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC).. Load current vs. ambient temperature in adjacent mounting IL : Load current; IL (max.): continuous load current I L /I L (max.),% R= mm R= mm R= mm RR R=Adjacent mounting pitch.-() Turn on time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC) AQZ AQZ AQZ AQZ7.-() Turn off time vs. ambient temperature LED current: ma; Load voltage: V (DC); Continuous load current: ma (DC). AQZ7 AQZ AQZ AQZ.-() LED operate vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC).... AQZ7 AQZ AQZ AQZ.-() LED operate vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC).... AQZ7AQZ AQZ AQZ 7.-() LED turn off current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) LED operate current, ma AQZ AQZ AQZ AQZ7 LED operate current, ma AQZ AQZ AQZ7 AQZ LED turn off current, ma AQZ AQZ7 AQZ AQZ
5 7.-() LED turn off current vs. ambient temperature Load voltage: V (DC); Continuous load current: ma (DC) LED turn off current, ma AQZ AQZ7 AQZ AQZ 9.-() Voltage vs. current of output at MOS portion (DC type) Current, A Voltage, V AQZ AQZ AQZ7 AQZ.-() LED forward current vs. turn on time Load voltage: V (DC); Continuous load current: ma (DC); AQZ AQZ7 AQZ AQZ.-() Load voltage vs. turn on time (Load voltage:, V type) LED current: ma; Continuous load current: ma;. LED dropout voltage vs. ambient temperature Sample: all types; LED current: to ma LED dropout voltage, V ma ma ma ma ma. Off state leakage current Off state leakage current, A 9 AQZ, AQZ, AQZ, AQZ AQZ7, AQZ7.-() LED forward current vs. turn off time Load voltage: V (DC); Continuous load current: ma (DC);..... AQZ AQZ7 AQZ AQZ.-() Load voltage vs. turn on time (Load voltage:, V type) LED current: ma; Continuous load current: ma; AQZ, 9.-() Voltage vs. current of output at MOS portion (AC/DC type) Current, A... AQZ AQZ AQZ7. AQZ Voltage, V....-() LED forward current vs. turn on time Load voltage: V (DC); Continuous load current: ma (DC); AQZ AQZ AQZ AQZ7.-() LED forward current vs. turn off time Measured portion: between terminals and ; Load voltage: V (DC); Continuous load current: ma (DC);..... AQZ AQZ AQZ AQZ7.-() Load current vs. turn on time (Load voltage:, V type) LED current: ma; Load voltage: V (DC); AQZ AQZ AQZ AQZ 7 9 AQZ AQZ7 AQZ7 AQZ AQZ AQZ AQZ AQZ......
6 AQZ,.-() Load current vs. turn on time (Load voltage:, V type) LED current: ma; Load voltage: V (DC);.-() Load voltage vs. turn off time (Load voltage:, V type) LED current: ma; Continuous load current: ma;..-() Load voltage vs. turn off time (Load voltage:, V type) LED current: ma; Continuous load current: ma;. AQZ AQZ AQZ7 AQZ7.... AQZ AQZ AQZ AQZ.... AQZ7 AQZ7 AQZ AQZ () Load current vs. turn off time (Load voltage:, V type) LED current: ma; Load voltage: V (DC);..... AQZ AQZ AQZ AQZ () Applied voltage vs. output capacitance Frequency: MHz; capacitance, pf AQZ AQZ AQZ7AQZ Applied voltage, V 7 9.-() Load current vs. turn off time (Load voltage:, V type) LED current: ma; Load voltage: V (DC);..... AQZ AQZ AQZ7 AQZ () Applied voltage vs. output capacitance Frequency: MHz; AQZ AQZ AQZ7 AQZ Applied voltage, V capacitance, pf 7. operating frequency vs. load voltage/current LED current: ma; operating frequency, time/s Duty factor = % load currnt, A ACCESSORY Socket. ±..9 ± ±... ±..9 ± ±.... mm inch PC board pattern (BOTTOM VIEW) Standard type PAa-PS 9 ±.. ±.. ±..9 ±... (.) (.) ±..9 ± PAa-PS-H Matsushita Electric Works Group Europe For Cautions for Use, see PhotoMOS Relay Technical Information ±.. ±.. ±..9 ±. (.) (.). ±.. ±... - dia. -.9 dia. Self clinching type.. ±. dia Tolerance: ±. ±. -. dia. -.7 dia. -. ±. dia. -. ± dia. ± dia. -.7
Slim type with high capacity up to 4A DC load type also available
VDE Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ) Height includes standoff.7 + + DC type + AC/DC type....9 RoHS compliant mm inch FEATURES. Slim SIL-pin package
Slim type with high capacity up to 4A DC load type also available
Slim type with high capacity up to A DC load type also available Power Form A (AQZ, ).7 + DC type....9 (Height includes standoff) mm inch RoHS compliant AC/DC type FEATURES. Slim SIL-pin package (W). (D).
Max. high capacity 10A in a slim SIL package
Max. high capacity A in a slim SIL package Power Form A DC High Capacity (AQZ9 )..9..77..7 + RoHS compliant Height includes standoff mm inch FEATURES. High capacity type power PhotoMOS. Can switch a wide
SUNSTAR 传感与控制 TEL: FAX: POWER PhotoMOS RELAYS (Voltage Sensitive Type) Photo
POWER PhotoMOS RELAYS (Voltage Sensitive Type) PhotoMOS RELAYS 1±..7±. FEATURES 3.5±..13±. 1.5±..9±. mm inch 1. A voltage sensitive power Photo- MOS relay Conventional power PhotoMOS relays are connected
High capacity up to 6A in a slim SIL package
High capacity up to A in a slim SIL package Power Form A High Capacity (AQZ G) New Height includes standoff.7....9 RoHS compliant mm inch Please check our website for the latest information regarding compliance
Slim and high capacity up to 3.6A Voltage-driven type
Slim and high capacity up to 3.A Voltage-driven type Power 1 Form A Voltage-sensitive (AQZ1 D, D) 1 3.5 1.13.7 1.5.9 (Height includes standoff) mm inch + 3 1 3 DC type AC/DC type RoHS compliant FEATURES
DIP6-pin type with wide variation Low on-resistance
HF Form A (AQV, ) DIP-pin type with wide variation Low on-resistance HF Form A (AQV, ) 8.8....9. Height includes standoff 8.8..... mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely
Miniature SOP6-pin type with high capacity of 3A load current
Miniature SOP6-pin type with high capacity of A load current HE SOP Form A High Capacity (AQV G S). 6..7.8..8 6 mm inch FEATURES. High capacity in a miniature SOP package Continuous load current: Max.
Flat Power-DIP4-pin type with high capacity up to 2A load current
Flat Power-DIP-pin type with high capacity up to A load current PD Form A (AQY7 ) 9.....9. 9.. (Height includes standoff)...7. mm inch FEATURES. Flat-Packaged type (W). (D) 9. (H).9 mm (W). (D). (H). inch.
Capable of 2.4A to 3.5A high capacity load current control
Capable of.a to.a high capacity load current control HE Form A High Capacity (AQV G) 8.8.6 6...9. 8.8 6..6..6. (Height includes standoff) mm inch 6 FEATURES. Greatly increased load current in a compact
Approx. 25% Approx. 50% Footprint
Miniature SOP6-pin type of 6 to 6V load voltage GU SOP Form A (AQV S). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Controls low-level analog signals PhotoMOS feature extremely low closedcircuit offset
6-pin type for switching low-level analog signal
(Standard type) (Reinforced type) 6-pin type for switching low-level analog signal GU Form A (AQV, AQVH) TYPES AC/DC dual use 8.8.6 6.. 8.8.6 6...9..6. *Indicate the peak AC and DC values. Note: The surface
GU 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a DIP8-pin package GU Form A & Form B (AQW) 9.78.8... 9.78.8..9... (Height includes standoff) mm inch 8 N.C. 7 N.O. FEATURES. Approx. / the space compared with
Distributed by: www.jameco.com -8-8- The content and copyrights of the attached material are the property of its owner. High sensitivity and low on-resistance. DIP ( Form A) -pin type. HE PhotoMOS (AQV
Normally closed SOP6-pin type of 400V load voltage
Normally closed SOP6-pin type of V load voltage GU SOP Form B (AQVS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP6-pin package The device comes in a small SOP measuring (W). (L) 6. (H).
Normally closed DIP8-pin type of 400V load voltage. FEATURES 1. Approx. 1/2 the space compared with the mounting of Two 1 Form B PhotoMOS units
Normally closed DIP8-pin type of V load voltage GU Form B (AQW) 9.78.8 6. 9.78 6...9.8..6.. (Height includes standoff) FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units
Miniature SOP6-pin type Low on-resistance 200V/400V load voltage
Miniature SOP6-pin type Low on-resistance V/V load voltage RF SOP Form A Low on-resistance (AQV NS). 6..7.8..8 6 RoHS compliant mm inch FEATURES. Miniature SOP-pin package (W). (L) 6. (H). mm (W).7 (L).8
RF VSSOP 1 Form A C R
C R type VSSOP package 6V and V load voltage RF VSSOP Form A C R (AQY T).8.7.9...8 mm inch FEATURES. Miniature VSSOP package.6 mm mounting area achieved. Approx. 9% less than previous product (SON type).
C R type SSOP package 60 V, 80 V and 100 V load voltage
C R type SSOP package 6 V, 8 V and V load voltage RF SSOP Form A C R (AQY V).65. RoHS compliant.5.75.8.7 mm inch FEATURES. Miniature SSOP package (Compared to SOP -pin models, volume ratio can be reduced
Compact DIP8-pin type of 60V to 600V load voltage
Compact DIP8-pin type of 6V to 6V load voltage GU Form (QW ) 6. 6. 9.78. 9.78..8.8.9.6.. (Height includes standoff) mm inch 8 7 6 RoHS compliant FETURES. Compact 8-pin DIP size The device comes in a compact
Short circuit protection (Non-latch type) only for DC load
Short circuit protection (Non-latch type) only for DC load GU Form A Short Circuit Protection (AQVKL) 8.8 6.. 8.8 6..6.6..9.6.. (Height includes standoff) mm inch 6 + RoHS compliant FEATURES. Protects
Small SOP4-pin type with short circuit protecting (Latch type)
Small SOP-pin type with short circuit protecting (Latch type) GU SOP Form A Short Circuit Protection (AQYKS)..69..7..8 mm inch FEATURES. Short circuit protection (Latch type) When the output current exceeds
Miniature SOP4-pin type Low C R 60V/80V load voltage. FEATURES 1. Low capacitance and low on resistance (Load voltage: 60 to 80V)
() Miniature SOP4-pin type Low C R 6V/8V load voltage RF SOP Form A C R (AQY R S) 4.3 4.4.69.73..83 mm inch 4 3 RoHS compliant FEATURES. Low capacitance and low on resistance (Load voltage: 6 to 8V) capacitance
RF SOP 1 Form A C R10
RF SOP Form A C R (AQY S) Miniature SOP4-pin with C R 4V load voltage RF SOP Form A C R (AQY S) 4.3 4.4 4.3 4.4.69.73.69.73...83.83 mm inch 4 3 RoHS compliant FEATURES. Both low on-resistance
GE 1 Form A & 1 Form B
Both N.O. and N.C. contacts incorporated in a compact DIP8-pin Reinforced insulation (QWEH, EH) () GE Form & Form B (QW EH) 9.78. 9.78..8..8..9... (Height includes standoff) mm inch N.C. 8 7 N.O. RoHS
Phototriac Coupler (APT1)
Phototriac coupler ideal for triac driver with wide variation APT VDE Phototriac Coupler (APT) FEATURES. Low zero-cross voltage (max. 5 V) type added to lineup. Approximately / of previous product Helps
Space-saving SSOP 1 Form A type with built-in registor 40V load voltage
Space-saving SSOP Form A type with built-in registor V load voltage RF SSOP C R Voltage-sensitive (AQYF V).6...7.8.7 mm inch RoHS compliant FEATURES. Built-in input resistor means less man-hours when mounting
APT Phototriac Coupler
Phototriac coupler ideal for triac driver with wide variation VDE APT Phototriac Coupler ZC circuit ORDERING INFORMATION ON-state RMS :.5 A/. A RoHS compliant ZC APT : V function : With zero-cross function
8 PIN DIP 400 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET
8 PIN DIP 4 V BREAKDOWN VOLTAGE TRANSFER TYPE 2-CH OPTICAL COUPLED MOSFET PS7141-1C FEATURES 2 CHANNEL TYPE: (1a + 1b output) LOW LED OPERATING CURRENT: IF = 2 ma DESIGNED FOR AC/DC SWITCHING LINE CHANGER
RF (Radio Frequency) C R 10 SSOP Type
UL pending CSA pending RF (Radio Frequency) C R SSOP Type (by) PhotoMOS RELAYS FEATURES..7.8.7.6. mm inch. Reduced package size Lower surface has been reduced 6% and mounting space % compared to conventional
DATA SHEET. 6, 8-PIN DIP, 200 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET
DATA SHEET Solid State Relay OCMOS FET PS7122-1A-2A,PS7122L-1A,-2A 6, 8-PIN DIP, 2 V BREAK DOWN VOLTAGE 1-ch, 2-ch Optical Coupled MOS FET DESCRIPTION The PS7122-1A, -2A and PS7122L-1A, -2A are solid state
6-PIN DIP, 0.08 Ω LOW ON-STATE RESISTANCE 2.0 A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 6-PIN DIP,.8 Ω LOW ON-STATE RESISTANCE 2. A CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS71E-1A and PS71EL-1A are solid state relays containing
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY CLOSE TYPE 1-ch Optical Coupled MOS FET DESCRIPTION The is a solid state relay containing GaAs LEDs on the light emitting side (input
4-PIN SOP 400 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET 4-PIN SOP 4 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The is an optically coupled element that combines a GaAs infrared LED
8-PIN DIP, 250 V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7122A-1C,PS7122AL-1C DESCRIPTION 8-PIN DIP, V BREAK DOWN VOLTAGE TRANSFER TYPE 2-ch Optical Coupled MOS FET NEPOC Series The PS7122A-1C and PS7122AL-1C are transfer
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET
4-PIN ULTRA SMALL FLAT-LEAD, LOW C R (6.3 pf Ω) 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET
4-PIN SOP, 1.1 Ω LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET NEPOC Series DESCRIPTION The is a low output capacitance solid state relay containing a GaAs LED
DATA SHEET. 4-PIN SOP, 0.6 Ω LOW ON-STATE RESISTANCE 600 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET
DATA SHEET 4-PIN SOP,.6 Ω LOW ON-STATE RESISTANCE 6 ma CONTINUOUS LOAD CURRENT 1-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS726-1A NEPOC Series DESCRIPTION The PS726-1A is a low on-state
RT-3 UNIT RELAY 4-POINT TERMINAL
Slim, Space-saving, -point Unit Relay RT-3 UNIT RELAY -POINT TERMINAL [PA Relay type, PhotoMOS Power (Voltage sensitive type)] RT-3 Unit relay -point Terminal [PA relay, PhotoMOS Power (Voltage sensitive
4 AMP POLARIZED HIGH DENSITY RELAY WITH HIGH SENSITIVITY FEATURES
4 AMP POLARIZED HIH DENSITY RELAY WITH HIH SENSITIVITY SRELAYS FEATURES 28. 1...472 1.4.49 mm inch A variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available
Distributed by: www.jameco.com 188314242 The content and copyrights of the attached material are the property of its owner. S 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS 28. 1.12 12..472
PS7113-1A,-2A,PS7113L-1A,-2A
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A, -2A
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
Slim type SSR for 1 A and 2 A control AQ-G RELAYS
VDE Slim type SSR for 1 A and A control AQ-G RELAYS ORDERING INFORMATION current 1: 1 A : A RoHS compliant voltage : 75 to 6 Vrms 1: Zero-cross (3, V) : Random (3, V) Control voltage 5: to 6 V DC 1: 9.6
EN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
CP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
30 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 4V DC or peak AC, SMD or, Low Off-State Leakage Current, UL listed, RoHS Compliance Applications: Battery Management Systems, I/O Modules,
8-PIN SOP, 260 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
8-PIN SOP, 26 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET Solid State Relay OCMOS FET PS7221A-2A NEPOC Series DESCRIPTION The PS7221A-2A is a solid state relay containing
Distributed by: www.jameco.com -8-83-44 The content and copyrights of the attached material are the property of its owner. D HIGHLY ENITIVE 5 V FCC URGE WITHTANDING INIATURE RELAY D RELAY D4E 35.4.387
8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
1a 8A, 1a1b/2a 5A small polarized power relays
a A, ab/a A small polarized power DSP RELAYS Compliance with RoHS Directive FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity
PhotoIC Coupler (AlGaAs LED & PhotoIC)
0 Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS) New +..73..087.3.69 Vcc Vout GND mm inch 3 FEATURES. High speed Photo Coupler with receiver circuit IC. Capable of high speed communication (Transfer
SLIM COMPACT SAFETY RELAY
SLIM COMPACT SAFETY RELAY SF-RELAYS Slim type Max. 24.945 Max. 24.945 Max. 4.575 Max. 5.969 Max. 3.52 Max. 3.52 mm inch FEATURES Forcibly guide contact structure (EN525 ClassA TÜV recognized) Slim profile
Compliant with European standards 1a/1c 6A Slim power relays
PF (APF) VDE Compliant with European standards 1a/1c 6A Slim power relays PF RELAYS (APF) RoHS compliant FEATURES 1. High density mounting with mm.197 inch width Space saved with mm.197 inch slim type
GENERAL PURPOSE SOLID STATE RELAY 8PIN DIP 2-CHANNEL TYPE FORM A SSR
Schematic Features Compact 8-pin DIP size Applicable for 2 Form A use as well as two independent 1Form A use Controls low-level analog signals High sensitivity and high speed response Low-level off state
CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET CURRENT LIMIT TYPE 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7341C-1A and PS7341CL-1A are solid state relays containing GaAs
RT-3 UNIT RELAY 4-POINT TERMINAL
Slim, Space-saving, -point Unit Relay RT-3 UNIT RELAY -POINT TERMINAL [PA-N Relay type, PhotoMOS Power (Voltage sensitive type)] -point Terminal [PA-N relay, PhotoMOS Power (Voltage sensitive type)] Mountable
4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENT RELAY 28. 1.2 12..472.4.49 FEATURE The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High sensitivity
GU (General Use) Type 2-Channel (Form A) Type
GU (General Use) Type -Channel (Form A) Type AQW PhotoMOS RELAYS UL File No.: E9 CSA File No.: LR 9.....9±..±. 9.. mm inch...±..±. FEATURES. Compact -pin size The device comes in a compact (W). (L) 9.
Palm-sized, 16-channel Relay Terminals
Palm-sized, -channel Relay Terminals RELAY TERMINAL FEATURES. Possible to select relay for use in the relay terminal in accordance with load. [Mountable relay: PA relay and Power PhotoMOS (voltage sensitive
45 Series Photo-MOSFET Relay
Features: General Purpose Photo MOSFET Relay, switching up to 60V DC or Peak AC THT, SMD or SOP Tested in accordance with AEC-Q101, UL listed, RoHS Compliance Applications: Battery Management Systems,
PhotoIC Coupler (AlGaAs LED & PhotoIC)
Mbps type PhotoIC Coupler (AlGaAs LED & PhotoIC) (APS, APS) New...87.3.69.73 mm inch Totem pole output Open drain output Vcc Vcc 5 Vout Vout 5 GND 3 GND 3 Truth table Truth table LED Output LED Output
HIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE RELAY FEATURES. Max. operating speed. Initial. Reset time* 3 (at nominal voltage)
TETING HIGHLY ENITIVE 5 V FCC URGE WITHTANDING INIATURE RELAY D-RELAY D4E 35.4.387 5.59 DE.39 9.8.386.39 9.8.386 PECIFICATI Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC
PARM-SIZED, 16-CHANNEL RELAY TERMINALS
Pressure connector connect type Wire-direct connect type PARM-SIZED, -CHANNEL RELAY TERMINALS FEATURES Compact, space-saving design: The Relay Terminal with I/O channels measures only (W) (D) (H) mm (W).
UNIQUELY DESIGNED RELAY FEATURES
UL CSA VDE Pending Pending Pending UNIQUELY DESIGNED RELAY K-RELAYS a.8 FEATURES 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical ( A V): more
1a 8A, 1a1b/2a 5A small polarized power relays
Automation Controls Catalog a A, ab/a A small polarized power DSP RELAYS RoHS compliant Protective construction: Sealed type FEATURES. Compact with high contact rating Even with small mm. inch (H) mm.
Transistor drive 2c/4c 5A slim power relays
Transistor drive 2c/4c 5A slim power relays RELAYS 4 Flat type () 4 () 2 Flat type () 2 () FEATURES. Compact, slim design Use of high-performance flat electromagnetic design achieves 0.9 mm.429 inch profile,
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER SCHMITT TRIGGER
QT-Brightek Opto-Coupler Series 6-PIN DIP PHOTOCOUPLER Part No.: Product: Date: February 09, 2018 Page 1 of 18 Table of Contents: Introduction... 3 Absolute Maximum Rating... 6 Electrical Characteristic:
PHOTOMOS & SOLID STATE RELAYS
PART : ELECTROMECHANICAL RELAYS RELAY CATALOG PART PHOTOMOS & SOLID STATE RELAYS Notes and Guidelines Panasonic is part of a large worldwide group selling relays and associated switching products under
GU (General Use) Type 1-Channel (Form A) Type
GU (General Use) Type -Channel (Form A) Type AQV PhotoMOS RELAYS UL File No.: E9 CSA File No.: LR.±..±. TYPES type E type type E type.±..±..9±..±..±..±. I/O isolation voltage, V AC Reinforced, V.±..±..±..±.
4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).4(W).7(H). High contact capacity: A. Outstanding surge resistance
MOS FET Relays in DIP 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
4-pin, Type in 4-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay Load voltage: V, 4 V, 6 V, or V -V Relay: Continuous load current of A max. 4-V Relay:
COMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS.... Compliance with RoHS Directive FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in
Slim compact safety relay
Slim compact safety relay SF RELAYS Slim type Max..9 Max..9 Max.. Max..99 Max.. Max.. mm inch FEATURES Forcibly guide contact structure (EN Class A TÜV recognized) Slim profile (mm inch) Compact size with
GU (General Use) Type 2-Channel (Form B) Type. Part No. Surface-mount terminal Tape and reel packing style Picked from the 1/2/3-pin side.
GU (General Use) Type -Channel (Form B) Type AQW PhotoMOS RELAYS UL File No.: E9 CSA File No.: LR FEATURES. Approx. / the space compared with the mounting of Two Form B PhotoMOS units Two Form B units
6, 8-PIN DIP, 100 V BREAK DOWN VOLTAGE 350 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS7113-1A,-2A,PS7113L-1A,-2A 6, 8-PIN DIP, 1 V BREAK DOWN VOLTAGE 35 ma CONTINUOUS LOAD CURRENT 1-ch, 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS7113-1A,
MOS FET Relays in SSOP packages that achieve a low C R
@ S, Low-output-capacitance and Low-ON-resistance Type (with Low C R) in S packages that achieve a low C R Load voltage: V : Low C R = 5 pf Ω, COFF (standard) = pf, RON (standard) = 5 Ω : Low C R =. pf
4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK RoHS compliant FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).34(W).7(H). High contact capacity: A 3. Outstanding
MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
COMPACT PC BOARD POWER RELAY FEATURES. Characteristics. Initial breakdown voltage* 1. Vibration resistance
VDE PACT PC BOARD POWER RELAY JW RELAYS..... FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in µs between coil and contact
DISCONTINUED PS7904-1A. Preliminary Data Sheet DESCRIPTION FEATURES APPLICATIONS
OCMOS FET 4-PIN SMALL FLAT-LEAD, LOW ON-STATE RESISTANCE 1-ch Optical Coupled MOS FET DESCRIPTION Preliminary Data Sheet The is a low output capacitance solid state relay containing a GaAs LED on the light
KAQY214 Series. cosmo. 4PIN 400V N.O TYPE SOLID STATE RELAY-MOSFET Output. Description. Schematic. Features. Application 1 FORM A NORMALLY OPEN
Description The KAQY series is robust, ideal for telecom and ground fault applications. It is a SPST normally open switch ( Form A) that replaces electromechanical relays in many applications. It is constructed
Distributed by: www.jameco.com 1-8-81-44 The content and copyrights of the attached material are the property of its owner. SLIM POLARIZED RELAY TN RELAYS.551. 9.8.86 FEATURES Small header area makes higher
Suitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
COMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS..... RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Miniature package with universal terminal footprint High dielectric withstanding for
New pin layout (LT type) added. Best seller with broad lineup and AC 2000 V breakdown voltage.
Compliance with RoHS Directive FEATURES. 2, V breakdown between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown of 2, V between contact and
General-purpose MOS FET Relays in DIP packages for a wide range of applications
Introduction General-purpose High-load-voltage Multi-contact-pair (a, b, and ab), General-purpose Type General-purpose in packages for a wide range of applications Package: 4-pin or 6-pin Contact form:
6-PIN DIP, 400V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE
DESCRIPTION The PS7141E-1A and PS7141EL-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal
8-PIN DIP, 600 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET
Solid State Relay OCMOS FET PS716-2A,PS716L-2A 8-PIN DIP, 6 V BREAK DOWN VOLTAGE NORMALLY OPEN TYPE 2-ch Optical Coupled MOS FET NEPOC Series DESCRIPTION The PS716-2A and PS716L-2A are solid state
MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A. 1 Form B. Initial breakdown voltage* 2 8 A 250 V AC 8 A 30 V DC 250 V AC, 30 V DC
VDE MINIATURE POWER RELAY DKRELAYS a..9.9 ab.9.9 FEATURES Large capacity in small size: A V AC (a) High sensitivity: mw nominal power High breakdown, Vrms between contacts and coil, Vrms between open contacts
USOP Package with Low Output Capacitance and ON Resistance
G3VM-PR@ U, Low-output-capacitance and Low-ON-resistance Type (with Low C R) U Package with Low Output Capacitance and ON Resistance : V : Low C R =.4 pf Ω, COFF (standard) =.8 pf, RON (standard) = 3 Ω
MOS FET Relay. Ordering Information. SSR for Switching Analog Signals, with an Insulation Value of 2.5 kvac between Input and Output Terminals
MOS FET Relay GVM SSR for Switching Analog Signals, with an Insulation Value of. kvac between Input and Output Terminals Switching minute analog signals. Linear voltage and characteristics. Switching AC
MOS FET Relays in DIP 6-pin packages that achieve the low ON resistance and high switching capacity of a mechanical relay
Introduction General-purpose High-load-voltage Multi-contact-pair High-current and Small and Highdielectric-strength (a, b, and ab) Low-ON-resistance GVM-@BR@/@ER@ -pin, High-current Type in -pin packages
KAQW212 Series. cosmo 8PIN 60V N.O. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two normally open switches that can be used as two independent SPST relays or as one DPST relay. The relay is constructed using a GaAlAs LED for actuation control and
10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
KAQV414 Series. cosmo 6PIN 400V N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQV series is robust, ideal for telecom and ground fault applications. It is a SPST normally close switch ( Form B) that replaces electromechanical relays in many applications. It is constructed
HIGH INSULATION RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003))
TESTING HIGH INSULATI RELAYS (Conforming to the supplementary insulation class of EN Standards (EN)) TX-D RELAYS.9.9 8...9.9 8.. FEATURES Approved to the supplementary insulation class in the EN standards
KAQW614 Series. cosmo 8PIN 400V N.O.+ N.C. TYPE SOLID STATE RELAY-MOSFET OUTPUT. Description. Schematic. Features. Application
Description The KAQW series contains two independent Form A and Form B SPST relays. The relay is constructed using a GaAlAs LED for actuation control and an integrated monolithic dies for the switch output.
KPS28010T Series 4PIN SSOP LOW INPUT CURRENT PHOTOCOUPLER
Description The KPS28T series is DC-input single channel which contains a light emitting diode optically coupled to a phototransistor. It is packaged in a 4-pin SSOP package. The input-output isolation