PROJECTS AVAILABLE FOR SEMESTER I ( ) (Study Project/ Laboratory Project/ Design Project)
|
|
- Elisabeth Gordon
- 6 years ago
- Views:
Transcription
1 Department of Electrical and Electronics Engineering PROJECTS AVAILABLE FOR SEMESTER I ( ) (Study Project/ Laboratory Project/ Design Project) Name of Faculty Title of Project Serial no. of Project Skill Set required Expected Outcome Prof. Navneet Gupta 1) Material Selection on Dielectric materials for high-energy-storage application 2017FS0101 CGPA > 8.5 quality journal paper (SCOPUS indexed) 2) Design and testing of Voicecontrolled Home Automation System 2017FS0102 Analog Electronics Prototype Prof. V K Chaubey Prof. Surekha Bhanot 3) Study on Stability Issues of ZnO based Thin-Film Transistors 1) Study, design and analysis of optical / wireless link/systems 2) Device modeling ( Electronic /Optoelectronic/ nanoelectronic/photonic and related areas) 1) Study on Dynamic robot path planning 2017FS0103 CGPA > 8.5 quality journal paper (SCOPUS indexed) 2017FS FS FS0601 2) 3D imaging using IR/UV sensors 2017FS0602 Related courses/electiv es done ( preferably in 3 rd year) (students should discuss the area/problem to ensure his interest) Image, AI techniques Understanding the problem and steps to find the solutions. quality journal paper (SCOPUS indexed) 3) Application of Deep learning in NLP 4) AI application in modeling & control Prof. Anu Gupta 1)Application of logical effort technique to pass transistor logic 2)Design of CMOS TERNARY CIRCUITS 2017FS FS FS FS0302 microelectroni cs, ADVD, CADENCE etc.
2 3)High-Speed and Energy-Efficient Carry Skip Adder Operating Under a Wide Range of Supply Voltage Levels 4)Design of RBB analog signal circuits in sub threshold region 5)Design of A High Slew-Rate Push Pull Output Amplifier for Low-Quiescent Current Low- Dropout Regulators With Transient- Response Improvement 6)Design of CMOS TERNARY CIRCUITS 2017FS FS FS FS0306 7)Design of multipliers in sub threshold region using body bias technique 8)Design Of Low Voltage Low Power Self Biased Cmos Current Reference (REF Details.jsp?arnumber= )A novel CMOS operational transconductance amplifier based on a mobility compensation technique 10)Analysis and Design of Mixed- Mode Operation for Noninverting Buck Boost DC DC Converters 11)Analysis and Design of an Ultrabroadband Stacked Power Amplifier in CMOS Technology 12)Power supply rejection ratio in operational transconductance amplifiers 13)Study, analysis and characterization of Coupling noise in interconnects in scaled VLSI technologies 14)Study and analysis of noise margin for digital logic design in subthreshold region 2017FS FS FS FS FS FS FS FS0314 Prof. H. D. Mathur 1) Applications in Smart Grid, 2017FS0801 Commitment (Mandatory) and Well versed with MATLAB/Sim 2) Implications of Vehicle to Grid, 2017FS0802 ulink, particularly Simpowersyste m toolbox, Communicatio Quality journal publication/ Prototype for design project
3 3) Smart Integration of Renewable sources of Energy 2017FS0803 n toolbox. Understanding of DSP will have an added advantage (but not necessary). Prof. Hari Om Bansal 1) Study on Charging infrastructure for PHEVs 2) Design of Energy Optimization strategies for Plug in Hybrid Electric Vehicles 3) Design and development of Vehicle to Grid Technologies 4) Development of Maximum power point tracking (MPPT) Algorithms for PV systems 5) Integration and control of hybrid renewable energy system 6) Design and Development of Bidirectional Converters for Hybrid Vehicle applications 7) Control and balancing of Bots/Manipulators 2017FS FS FS FS FS FS FS0707 Dr. K. K. Gupta 1)Drinking Water Quality Sensors 2017FS1001 Dr. Kumar Rajneesh 2)High Efficiency Video coder 3)Acoustic and Vibration based Machine Health Monitoring 4) Biometrics, Biomedical Image and Signal Processing 1)Study on Socio-economic aspects of renewable energy installation in India 2)Design of power electronic circuitry for wireless power transfer in PV systems 3) Design of 3D circuit for efficient wireless power transfer Dr. Asutosh Kar Design of variable tap-length adaptive feedback canceller for digital hearing-aids 2017FS FS FS1004 Electrical Sc, Control Systems, Power Electronics 2017FS1101 For 1) CGPA > 7 And some economics 2017FS1102 related expertise For 2) and 3) 2017FS1103 power electronics with MATLAB/AN SYS software expertise 2017FS2201 CGPA > 8.00, Excellent MATLAB Skill, Basics of Signal Processing quality journal (SCOPUS indexed)/conference paper). journal paper SCI indexed Simulation design with IEEE conference publications Simulation with conference publications design IEEE
4 Dr. Rahul Singhal Dr. Praveen Kumar A.V. Dr.Anantha Krishna Chintanpalli Dr. Bitragunta Sainath 1) Infrared Communications in Free Space 2) Patch Antenna Design and Analysis 3) Passive/Active Photonic Device Design and Analysis 1) Microwave material characterization using cavity perturbation 2) Near-field analysis of microwave antennas 3) Microstrip resonator integrated antenna design 2017FS1501 CGPA 7.0 Simulation Schematic & 2017FS1502 National/Internation al Conference Paper 2017FS FS FS FS1303 EM theory EM theory EM theory. 4) Compact RF cavity designs 2017FS1304 EM theory, accelerator physics (desirable), Exposure to CAD softwares (desirable) 1) Feature extractions using the speech 2) Filter Design using the Multi rate signal 1) Energy harvesting IoT: PHY layer modeling and performance analysis 2)Cooperative and cognitive satellite systems: efficient protocol design and performance study 2017FS1801 CGPA > 8.5 MATLAB 2017FS1802 Signals and Systems/DSP 2017FS1601 Probability, digital n, Ability to learn new tools (eg. MATLAB, NetSim, WSnet), 2017FS1602 Digital n via satellite, Ability to learn new tools Conference publication for based works. Journal publication for experimental works Publication in signal conference. Journal (Scopus)/ Conference publication
5 Dr. Aashish Mathur Dr. ARNAB HAZRA 3)Energy-awareand/or interferenceaware IoT for 5G wireless n systems 4)Energy-awareand/or interferenceaware random access policies for 5G wireless n systems 5)Cooperative visible light n system modeling and protocol design 1) A Study on the Statistical Characterization of a Power Line Communication Channel 1) Development of Reduced Graphene Oxide based Vapor Sensor Devices 2) Development of Metal Oxide Nanostructure based Memristive Devices (RRAM) 2017FS FS FS FS FS FS1702 Probability, digital n, Ability to learn new tools, Probability, digital n, Ability to learn new tools, Probability, light n basics, skills, CGPA>8, Basic MATLAB, Communicatio n Systems and Electromagneti c Theory CGPA>8.0 Skill: Electronic Devices Publication in a standard IEEE conference/scopus indexed journal (based on quality of research and knowledge advancement) Peer Reviewed Journal Paper/ Conference Proceedings Dr. Pawan K. Ajmera 1) Study of Biometric system, Biomedical signals, 2) Application of Image in Biomedical. 3) Design of Biometric system (Unimodal and multimodal) 2017FS1901 CGPA > FS FS1903 Matlab and Signal Journal paper (SCOPUS indexed) Prototype
6 Dr. Mahesh Angira 1) RF MEMS technology based shunt capacitive switches for X- band applications. 2) Design of Mutli-Port switches (capacitive/ ohmic) using RF MEMS technology for X- band applications. 3) Design of switch matrix using RF MEMS technology. 4) RF MEMS technology based phase shifter. 5) Design of pressure sensor using MEMS technology. 6) Design of gyroscope using MEMS technology. 7) Design of accelerometer using MEMS technology. 8) Study of DMD for projection television application. 9) Study of resonator and filters using RF-MEMS technology. 2017FS2301 Understanding the problem and steps to find the solutions/ 2017FS2302 papers in quality journals/conference 2017FS FS FS FS FS FS FS2309 Mr. Kavindra Kandpal 10) High-Q variable inductors and capacitors based on MEMS technology. 11) Reconfigurable antenna using RF-MEMS Switches. 1) Temperature compensated CMOS band gap reference circuits with curvature correction 2) Design of Gm/ C, notch filter in UMC 90 nm CMOS Technology 3) Design of SAR A to D converters. 4) Transport modeling of ZnO Thin Film Transistor. 5) Modeling of interconnects and design of clock distribution network for high speed CMOS ICs. 2017FS FS FS FS FS FS FS2605 excellent analog design skills along with exposure to CADENCE tool excellent analog design skills excellent analog design skills hold in mathematics and semiconductor devices, hold in mathematics and semiconductor devices, Conference (IEEE Xplore)/ Journal paper.
7 Mr. Samaiya Devesh Mr. K. Babu Ravi Teja 1) Study on video analysis algorithms in HEVC compressed domain 2) Design of USB device drivers for firmware only USB devices 1) Study of Junctionless transistors (JLT) 2) ASIC Implementation of Block Matching Algorithm for motion estimation 2017FS FS FS FS2802 Background in Image / Video Experience or basic background in linux device driver development and USB protocol semiconductor devices HDL, image e.g : quality journal paper (SCOPUS indexed Implementation of hardware and software for some USB peripheral device for example - SPI over USB or HID compliant device over USB Publication in a good Conference/ Journal Mr. Jahagirdar Ankush Mr. Harshavardhan S 3) Investigation of Design strategies for multi-gate-transistors understanding 2017FS2803 of Digital VLSI Design, SPICE Implementation of Generalized 2017FS3101 Predictive Algorithm on FPGA Control Systems, Digital Design, Linear Algebra, Basics of verilog 1) Robust video Watermarking 2017FS2901 Matlab, Image GPC Chip Controller Publication in a good Conference 2) Vehicle speed determination from video streams using image 2017FS2902 Mr. Ashish Patel 1) Mathematical modelling of solar PV for power electronic circuit 2) Design and implementation of digital control of SRM / Induction motor using microcontroller/fpga 2017FS FS3002 CGPA>7.0, Matlab/Simuli nk, Machines, Microcontrolle r/fpga quality journal paper (SCOPUS indexed) Laboratory prototype
PROJECTS AVAILABLE FOR SEMESTER I ( ) (Study Project/ Laboratory Project/ Design Project)
Department of Electrical and Electronics Engineering PROJECTS AVAILABLE FOR SEMESTER I (2018-2019) (Study Project/ Laboratory Project/ Design Project) Name of Faculty Title of Project Serial no. of Project
More informationVisvesvaraya Technological University, Belagavi
Time Table for M.TECH. Examinations, June / July 2017 M. TECH. 2010 Scheme 2011 Scheme 2012 Scheme 2014 Scheme 2016 Scheme [CBCS] Semester I II III I II III I II III I II IV I II Time Date, Day 14/06/2017,
More informationS T U DENT P ROFILES M.T ECH I N R A D I O F R EQUENCY D ES I G N AND T ECHNOLOGY
S T U DENT P ROFILES 2 0 1 4-1 6 M.T ECH I N R A D I O F R EQUENCY D ES I G N AND T ECHNOLOGY C E N T R E F O R A P P L I E D R E S E A R C H I N E L E C T R O N I C S I N D I A N I N S T I T U T E O F
More informationCourse Outcome of M.Tech (VLSI Design)
Course Outcome of M.Tech (VLSI Design) PVL108: Device Physics and Technology The students are able to: 1. Understand the basic physics of semiconductor devices and the basics theory of PN junction. 2.
More informationGuest Editorial: Low-Voltage Integrated Circuits and Systems
Circuits Syst Signal Process (2017) 36:4769 4773 DOI 10.1007/s00034-017-0666-7 Guest Editorial: Low-Voltage Integrated Circuits and Systems Fabian Khateb 1,2 Spyridon Vlassis 3 Tomasz Kulej 4 Published
More informationB. Tech. Degree ELECTRONICS AND COMMUNICATION ENGINEERING
B. Tech. Degree IN ELECTRONICS AND COMMUNICATION ENGINEERING SYLLABUS FOR CREDIT BASED CURRICULUM (2014-2018) DEPARTMENT OF ELECTRONICS AND COMMUNICATION ENGINEERING NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI
More informationBS in. Electrical Engineering
BS in Electrical Engineering Program Objectives Habib University s Electrical Engineering program is designed to impart rigorous technical knowledge, combined with hands-on experiential learning and a
More informationA Bandgap Voltage Reference Circuit Design In 0.18um Cmos Process
A Bandgap Voltage Reference Circuit Design In 0.18um Cmos Process It consists of a threshold voltage extractor circuit and a proportional to The behavior of the circuit is analytically described, a design
More informationEFFICIENT DRIVER DESIGN FOR AMOLED DISPLAYS
EFFICIENT DRIVER DESIGN FOR AMOLED DISPLAYS CH. Ganesh and S. Satheesh Kumar Department of SENSE (VLSI Design), VIT University, Vellore India E-Mail: chokkakulaganesh@gmail.com ABSTRACT The conventional
More information5G R&D at Huawei: An Insider Look
5G R&D at Huawei: An Insider Look Accelerating the move from theory to engineering practice with MATLAB and Simulink Huawei is the largest networking and telecommunications equipment and services corporation
More informationLABORATORIES-ECE. Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory
LABORATORIES-ECE Sir Srinivasa Ramanujan - Microprocessor & Microcontroller Laboratory Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual
More informationApproach to the Implementation and Modeling of LDO-Assisted DC-DC Voltage Regulators
Approach to the Implementation and Modeling of LDO-Assisted DC-DC Voltage Regulators Nasima Sedaghati, Herminio Martínez-García, and Jordi Cosp-Vilella Department of Electronics Engineering Eastern Barcelona
More informationA Low Power Single Ended Inductorless Wideband CMOS LNA with G m Enhancement and Noise Cancellation
2017 International Conference on Electronic, Control, Automation and Mechanical Engineering (ECAME 2017) ISBN: 978-1-60595-523-0 A Low Power Single Ended Inductorless Wideband CMOS LNA with G m Enhancement
More informationPutting It All Together: Computer Architecture and the Digital Camera
461 Putting It All Together: Computer Architecture and the Digital Camera This book covers many topics in circuit analysis and design, so it is only natural to wonder how they all fit together and how
More informationDesign of High Gain Two stage Op-Amp using 90nm Technology
Design of High Gain Two stage Op-Amp using 90nm Technology Shaik Aqeel 1, P. Krishna Deva 2, C. Mahesh Babu 3 and R.Ganesh 4 1 CVR College of Engineering/UG Student, Hyderabad, India 2 CVR College of Engineering/UG
More informationDESIGN AND ANALYSIS OF LOW POWER CHARGE PUMP CIRCUIT FOR PHASE-LOCKED LOOP
DESIGN AND ANALYSIS OF LOW POWER CHARGE PUMP CIRCUIT FOR PHASE-LOCKED LOOP 1 B. Praveen Kumar, 2 G.Rajarajeshwari, 3 J.Anu Infancia 1, 2, 3 PG students / ECE, SNS College of Technology, Coimbatore, (India)
More informationDesign and Simulation of Low Dropout Regulator
Design and Simulation of Low Dropout Regulator Chaitra S Kumar 1, K Sujatha 2 1 MTech Student, Department of Electronics, BMSCE, Bangalore, India 2 Assistant Professor, Department of Electronics, BMSCE,
More informationImplementation of Current Reuse Structure in LNAUsing 90nm VLSI Technology for ISM Radio Frequency System
Implementation of Current Reuse Structure in LNAUsing 90nm VLSI Technology for ISM Radio Frequency System 1 Poonam Yadav, 2 Rajesh Mehra ME Scholar ECE Deptt. NITTTR, Chandigarh, India Associate Professor
More informationChapter 3 : Closed Loop Current Mode DC\DC Boost Converter
Chapter 3 : Closed Loop Current Mode DC\DC Boost Converter 3.1 Introduction DC/DC Converter efficiently converts unregulated DC voltage to a regulated DC voltage with better efficiency and high power density.
More informationLABORATORIES-ECE. Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab
LABORATORIES-ECE Microprocessor & Microcontroller Lab - Srinivasa Ramanujan Lab Students are given extensive training in 16 bit microprocessors and micro controllers in this laboratory. Individual attention
More informationPhD Admissions Brochure
PhD Admissions Brochure Department of Electrical Engineering, IIT Hyderabad October, 2017 IITH Facts Started in August 2008 PhD program started in January 2009 MTech program started in August 2009 14 Departments
More informationBIOMEDICAL ELECTRONICS. Date & Day II - SEMESTER ADVANCED MEDICAL IMAGING DIAGNOSTIC AND THERAPEUTIC EQUIPMENT MEDICAL PRODUCT DESIGN
OSMANIA UNIVERSITY, HYDERABAD - 7 M. E. (BME) (Main) Examination, September 2013 EXAMINATION TIME TABLE Time : 2.00 PM to 5.00 PM Department of BME Date & Day BIOMEDICAL ELECTRONICS II - SEMESTER ADVANCED
More informationHydro Mechanics & Water Resources Engineering. Water. Management PTPG IV - Semester. PTPG IV - Semester Pre stressed Concrete
Date and Day Pre stressed UNIVERSITY COLLEGE OF ENGINEERING (Autonomous) OSMANIA UNIVERSITY M. E. (Civil) ( & ) and IV-Semester () Main Examination September 2012 EXAMINATION TIME TABLE Structural Prestressed
More informationDEPARTMENT OF ELECTRICAL ENGINEERING
DEPARTMENT OF ELECTRICAL ENGINEERING The department of Electrical Engineering is one of the largest departments in IIT Madras which works in the frontier areas of communications, microgrids, integrated
More informationDesign Of A Comparator For Pipelined A/D Converter
Design Of A Comparator For Pipelined A/D Converter Ms. Supriya Ganvir, Mr. Sheetesh Sad ABSTRACT`- This project reveals the design of a comparator for pipeline ADC. These comparator is designed using preamplifier
More informationSP 22.3: A 12mW Wide Dynamic Range CMOS Front-End for a Portable GPS Receiver
SP 22.3: A 12mW Wide Dynamic Range CMOS Front-End for a Portable GPS Receiver Arvin R. Shahani, Derek K. Shaeffer, Thomas H. Lee Stanford University, Stanford, CA At submicron channel lengths, CMOS is
More informationHigh Gain Low Noise Amplifier Design Using Active Feedback
Chapter 6 High Gain Low Noise Amplifier Design Using Active Feedback In the previous two chapters, we have used passive feedback such as capacitor and inductor as feedback. This chapter deals with the
More informationLow Cost Transmitter For A Repeater
Low Cost Transmitter For A Repeater 1 Desh Raj Yumnam, 2 R.Bhakkiyalakshmi, 1 PG Student, Dept of Electronics &Communication (VLSI), SRM Chennai, 2 Asst. Prof, SRM Chennai, Abstract - There has been dramatically
More informationCopyright 2007 Year IEEE. Reprinted from ISCAS 2007 International Symposium on Circuits and Systems, May This material is posted here
Copyright 2007 Year IEEE. Reprinted from ISCAS 2007 International Symposium on Circuits and Systems, 27-30 May 2007. This material is posted here with permission of the IEEE. Such permission of the IEEE
More informationDesign and Layout of a X-Band MMIC Power Amplifier in a Phemt Technology
Design and Layout of a X-Band MMIC Power Amplifier in a Phemt Technology Renbin Dai, and Rana Arslan Ali Khan Abstract The design of Class A and Class AB 2-stage X band Power Amplifier is described in
More informationCOMPUTER SCIENCE AND ENGINEERING
COMPUTER SCIENCE AND ENGINEERING Internet of Thing Cloud Computing Big Data Analytics Network Security Distributed System Image Processing Data Science Business Intelligence Wireless Sensor Network Artificial
More informationECEN689: Special Topics in Optical Interconnects Circuits and Systems Spring 2016
ECEN689: Special Topics in Optical Interconnects Circuits and Systems Spring 2016 Lecture 10: Electroabsorption Modulator Transmitters Sam Palermo Analog & Mixed-Signal Center Texas A&M University Announcements
More informationEECS240 Spring Advanced Analog Integrated Circuits Lecture 1: Introduction. Elad Alon Dept. of EECS
EECS240 Spring 2009 Advanced Analog Integrated Circuits Lecture 1: Introduction Elad Alon Dept. of EECS Course Focus Focus is on analog design Typically: Specs circuit topology layout Will learn spec-driven
More informationAcademic Course Description. VL2004 CMOS Analog VLSI Second Semester, (Even semester)
Academic Course Description SRM University Faculty of Engineering and Technology Department of Electronics and Communication Engineering VL2004 CMOS Analog VLSI Second Semester, 2013-14 (Even semester)
More informationROADMAP BACHELOR DEGREE OF ELECTRONIC ENGINEERING WITH HONOURS FACULTY OF ELECTRICAL AND ELECTRONIC ENGINEERING UNIVERSITI TUN HUSSEIN ONN MALAYSIA
Nationhood Safety Health I Culture BEE 1103 I Islamic Asian BEE 1003 Creativity II Signals Analog s Digital s s I BEE 302 V Fields Waves Power s BEE 302 BEB 303 Circuits s I s I II YEAR Final Year I 1
More informationIndex. Small-Signal Models, 14 saturation current, 3, 5 Transistor Cutoff Frequency, 18 transconductance, 16, 22 transit time, 10
Index A absolute value, 308 additional pole, 271 analog multiplier, 190 B BiCMOS,107 Bode plot, 266 base-emitter voltage, 16, 50 base-emitter voltages, 296 bias current, 111, 124, 133, 137, 166, 185 bipolar
More informationMaster Op-Doc/Test Plan
Power Supply Master Op-Doc/Test Plan Define Engineering Specs Establish battery life Establish battery technology Establish battery size Establish number of batteries Establish weight of batteries Establish
More informationDAV Institute of Engineering & Technology Department of ECE. Course Outcomes
DAV Institute of Engineering & Technology Department of ECE Course Outcomes Upon successful completion of this course, the student will intend to apply the various outcome as:: BTEC-301, Analog Devices
More informationCMOS fast-settling time low pass filter associated with voltage reference and current limiter for low dropout regulator
CMOS fast-settling time low pass filter associated with voltage reference and current limiter for low dropout regulator Wonseok Oh a), Praveen Nadimpalli, and Dharma Kadam RF Micro Devices Inc., 6825 W.
More informationOn Chip Active Decoupling Capacitors for Supply Noise Reduction for Power Gating and Dynamic Dual Vdd Circuits in Digital VLSI
ELEN 689 606 Techniques for Layout Synthesis and Simulation in EDA Project Report On Chip Active Decoupling Capacitors for Supply Noise Reduction for Power Gating and Dynamic Dual Vdd Circuits in Digital
More informationVLSI DFT(DESIGN FOR TESTABILITY)
S.NO PROJECT CODE 01 ITVL01 02 ITVL02 03 ITVL03 04 ITVL04 06 ITVL06 07 ITVL07 08 ITVL08 09 ITVL09 10 ITVL10 VLSI DFT(DESIGN FOR TESTABILITY) TITLE Test Stimulus Compression Based on Broadcast Scan with
More informationDesign of High Gain and Low Noise CMOS Gilbert Cell Mixer for Receiver Front End Design
2016 International Conference on Information Technology Design of High Gain and Low Noise CMOS Gilbert Cell Mixer for Receiver Front End Design Shasanka Sekhar Rout Department of Electronics & Telecommunication
More informationElectrical and Computer En - ELEC
Electrical and Computer En - ELEC 1 Electrical and Computer En - ELEC Courses ELEC 2110 ELECTRIC CIRCUIT ANALYSIS (4) LEC. 3. LAB. 3. Pr. (PHYS 1610 or PHYS 1617) and (COMP 1200 or COMP 1210 or COMP 1217)
More informationRail-To-Rail Output Op-Amp Design with Negative Miller Capacitance Compensation
Rail-To-Rail Op-Amp Design with Negative Miller Capacitance Compensation Muhaned Zaidi, Ian Grout, Abu Khari bin A ain Abstract In this paper, a two-stage op-amp design is considered using both Miller
More informationA CMOS Analog Front-End Circuit for MEMS Based Temperature Sensor
Technology Volume 1, Issue 2, October-December, 2013, pp. 01-06, IASTER 2013 www.iaster.com, Online: 2347-6109, Print: 2348-0017 A CMOS Analog Front-End Circuit for MEMS Based Temperature Sensor Bollam
More informationMechatronics 421/780. Department of Mechanical and Aeronautical Engineering. Page 1 of 10
Mechatronics 421/780 Department of Mechanical and Aeronautical Engineering Page 1 of 10 OVERVIEW AND OBJECTIVES 1. Course Overview Mechatronics (MEG 421 or MEG 780) is a multidisciplinary field of engineering
More informationEE 434 ASIC & Digital Systems
EE 434 ASIC & Digital Systems Dae Hyun Kim EECS Washington State University Spring 2017 Course Website http://eecs.wsu.edu/~ee434 Themes Study how to design, analyze, and test a complex applicationspecific
More informationTraining Schedule. Robotic System Design using Arduino Platform
Training Schedule Robotic System Design using Arduino Platform Session - 1 Embedded System Design Basics : Scope : To introduce Embedded Systems hardware design fundamentals to students. Processor Selection
More informationEvaluation of Package Properties for RF BJTs
Application Note Evaluation of Package Properties for RF BJTs Overview EDA simulation software streamlines the development of digital and analog circuits from definition of concept and estimation of required
More informationCATALOGUE. HBRP Publication
CATALOGUE HBRP Publication ARCHITECTURE Journal of Housing and Advancement in Interior Designing Є Housing Science and Management Є Computer Techniques in Architectural Design Є Construction Industry and
More informationA Top-Down Microsystems Design Methodology and Associated Challenges
A Top-Down Microsystems Design Methodology and Associated Challenges Michael S. McCorquodale, Fadi H. Gebara, Keith L. Kraver, Eric D. Marsman, Robert M. Senger, and Richard B. Brown Department of Electrical
More informationDesign and Analysis of Current-to-Voltage and Voltage - to-current Converters using 0.35µm technology
Design and Analysis of Current-to-Voltage and Voltage - to-current Converters using 0.35µm technology Kopal Gupta 1, Prof. B. P Singh 2, Rockey Choudhary 3 1 M.Tech (VLSI Design ) at Mody Institute of
More informationEC 1354-Principles of VLSI Design
EC 1354-Principles of VLSI Design UNIT I MOS TRANSISTOR THEORY AND PROCESS TECHNOLOGY PART-A 1. What are the four generations of integrated circuits? 2. Give the advantages of IC. 3. Give the variety of
More informationDESIGN ANALYSIS AND COMPARATIVE STUDY OF RF RECEIVER FRONT-ENDS IN 0.18-µM CMOS
International Journal of Electrical and Electronics Engineering Research Vol.1, Issue 1 (2011) 41-56 TJPRC Pvt. Ltd., DESIGN ANALYSIS AND COMPARATIVE STUDY OF RF RECEIVER FRONT-ENDS IN 0.18-µM CMOS M.
More informationWelcome to ESE Research Interviews 2017
Dear prospective research student: Welcome to ESE Research Interviews 2017 Thank you for applying for a research student position in our department. The interview s w ill be held on June 5-9, 2017, in
More informationPOWER ISIPO 29 ISIPO 27
SI NO. TOPICS FIELD ISIPO 01 A Low-Cost Digital Control Scheme for Brushless DC Motor Drives in Domestic Applications ISIPO 02 A Three-Level Full-Bridge Zero-Voltage Zero-Current Switching With a Simplified
More informationComparative Analysis of Compensation Techniques for improving PSRR of an OPAMP
Comparative Analysis of Compensation Techniques for improving PSRR of an OPAMP 1 Pathak Jay, 2 Sanjay Kumar M.Tech VLSI and Embedded System Design, Department of School of Electronics, KIIT University,
More information(VE2: Verilog HDL) Software Development & Education Center
Software Development & Education Center (VE2: Verilog HDL) VLSI Designing & Integration Introduction VLSI: With the hardware market booming with the rise demand in chip driven products in consumer electronics,
More information1 FUNDAMENTAL CONCEPTS What is Noise Coupling 1
Contents 1 FUNDAMENTAL CONCEPTS 1 1.1 What is Noise Coupling 1 1.2 Resistance 3 1.2.1 Resistivity and Resistance 3 1.2.2 Wire Resistance 4 1.2.3 Sheet Resistance 5 1.2.4 Skin Effect 6 1.2.5 Resistance
More informationDesign of a Capacitor-less Low Dropout Voltage Regulator
Design of a Capacitor-less Low Dropout Voltage Regulator Sheenam Ahmed 1, Isha Baokar 2, R Sakthivel 3 1 Student, M.Tech VLSI, School of Electronics Engineering, VIT University, Vellore, Tamil Nadu, India
More informationA Variable-Frequency Parallel I/O Interface with Adaptive Power Supply Regulation
WA 17.6: A Variable-Frequency Parallel I/O Interface with Adaptive Power Supply Regulation Gu-Yeon Wei, Jaeha Kim, Dean Liu, Stefanos Sidiropoulos 1, Mark Horowitz 1 Computer Systems Laboratory, Stanford
More informationTeaching Staff. EECS240 Spring Course Focus. Administrative. Course Goal. Lecture Notes. Elad s office hours
EECS240 Spring 2012 Advanced Analog Integrated Circuits Lecture 1: Introduction Teaching Staff Elad s office hours 519 Cory Hall Tues. and Thurs. 11am-12pm (right after class) GSI: Pierluigi Nuzzo Weekly
More informationLesson 4 Examples of the Sensors. Chapter-7 L04: "Internet of Things ", Raj Kamal, Publs.: McGraw-Hill Education
Lesson 4 Examples of the Sensors 1 Temperature Measuring and Control sensors Thermistor applications in home automation Sensing the cloud cover The output of thermistor connected to circuit of a signal
More informationBachelor of Science Program
Bachelor of Science Program The 4-year Bachelor of Science program comprises two phases. In the first five semesters, students are provided with a broad foundation in basic sciences and electrical engineering.
More informationDIGITAL INTEGRATED CIRCUITS A DESIGN PERSPECTIVE 2 N D E D I T I O N
DIGITAL INTEGRATED CIRCUITS A DESIGN PERSPECTIVE 2 N D E D I T I O N Jan M. Rabaey, Anantha Chandrakasan, and Borivoje Nikolic CONTENTS PART I: THE FABRICS Chapter 1: Introduction (32 pages) 1.1 A Historical
More informationStream Profiles Career Opportunities
Stream Profiles Career Opportunities As a Industrial & Control Engineer, You can be Control engineer, Modeling engineer, Development engineer, Test and validation engineer, Robotics Engineer R&D Electrical
More informationCHAPTER 3 APPLICATION OF THE CIRCUIT MODEL FOR PHOTOVOLTAIC ENERGY CONVERSION SYSTEM
63 CHAPTER 3 APPLICATION OF THE CIRCUIT MODEL FOR PHOTOVOLTAIC ENERGY CONVERSION SYSTEM 3.1 INTRODUCTION The power output of the PV module varies with the irradiation and the temperature and the output
More informationA 16Ω Audio Amplifier with 93.8 mw Peak loadpower and 1.43 quiscent power consumption
A 16Ω Audio Amplifier with 93.8 mw Peak loadpower and 1.43 quiscent power consumption IEEE Transactions on circuits and systems- Vol 59 No:3 March 2012 Abstract A class AB audio amplifier is used to drive
More informationELECTRICAL ENGINEERING AND COMPUTER SCIENCE (EECS)
ELECTRICAL ENGINEERING AND COMPUTER SCIENCE (EECS) DEPARTMENT CHAIR: B. Ross Barmish 407 Olin, 368-2802 E-mail: brb8@po.cwru.edu ASSOCIATE CHAIR FOR UNDERGRADUATE STUDIES Frank Merat 518 Glennan, 368-4572
More informationIJESRT. Scientific Journal Impact Factor: (ISRA), Impact Factor: 1.852
IJESRT INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY A Bridgeless Boost Rectifier for Energy Harvesting Applications Rahul *1, H C Sharad Darshan 2 *1,2 Dept of EEE, Dr. AIT Bangalore,
More informationCircuit For Mems Application
A Low Voltage To High Voltage Level Shifter Circuit For Mems Application The level converter is used as interface between low voltages to high voltage B.M. A low voltage to high voltage level shifter circuit
More information220 S. MAHESHWARI AND I. A. KHAN 2 DEVICE PROPOSED The already reported CDBA is characterized by the following port relationship [7]. V p V n 0, I z I
Active and Passive Electronic Components December 2004, No. 4, pp. 219±227 CURRENT-CONTROLLED CURRENT DIFFERENCING BUFFERED AMPLIFIER: IMPLEMENTATION AND APPLICATIONS SUDHANSHU MAHESHWARI* and IQBAL A.
More informationDAT175: Topics in Electronic System Design
DAT175: Topics in Electronic System Design Analog Readout Circuitry for Hearing Aid in STM90nm 21 February 2010 Remzi Yagiz Mungan v1.10 1. Introduction In this project, the aim is to design an adjustable
More informationEE105 Fall 2015 Microelectronic Devices and Circuits. Invention of Transistors
EE105 Fall 2015 Microelectronic Devices and Circuits Prof. Ming C. Wu wu@eecs.berkeley.edu 511 Sutardja Dai Hall (SDH) 1-1 Invention of Transistors - 1947 Bardeen, Shockley, and Brattain at Bell Labs Invented
More informationSensors & Transducers Published by IFSA Publishing, S. L.,
Sensors & Transducers Published by IFSA Publishing, S. L., 208 http://www.sensorsportal.com Fully Differential Operation Amplifier Using Self Cascode MOSFET Structure for High Slew Rate Applications Kalpraj
More informationA Hybrid Particle Swarm Optimization Algorithm for Maximum Power Point Tracking of Solar Photovoltaic Systems
Proceedings of The National Conference On Undergraduate Research (NCUR) 2017 University of Memphis Memphis, Tennessee April 6-8, 2017 A Hybrid Particle Swarm Optimization Algorithm for Maximum Power Point
More informationImaging serial interface ROM
Page 1 of 6 ( 3 of 32 ) United States Patent Application 20070024904 Kind Code A1 Baer; Richard L. ; et al. February 1, 2007 Imaging serial interface ROM Abstract Imaging serial interface ROM (ISIROM).
More informationDIGITAL ELECTRONICS ANALOG ELECTRONICS
DIGITAL ELECTRONICS 1. N10 4 Bit Binary Universal shift register. 2. N22- Random Access Memory (16*4). 3. N23- Read Only Memory. 4. N4-R-S/D-T Flip flop, characteristic and comparison. 5. Master Slave
More informationFULLY- DEPLETED SOI CMOS CIRCUITS AND TECHNOLOGY FOR ULTRALOW- POWER APPLICATIONS
FULLY- DEPLETED SOI CMOS CIRCUITS AND TECHNOLOGY FOR ULTRALOW- POWER APPLICATIONS Takayasu Sakurai University of Tokyo Akira Matsuzawa Tokyo Institute of Technology and Takakuni Douseki NTT Corporation
More informationA Low Power Array Multiplier Design using Modified Gate Diffusion Input (GDI)
A Low Power Array Multiplier Design using Modified Gate Diffusion Input (GDI) Mahendra Kumar Lariya 1, D. K. Mishra 2 1 M.Tech, Electronics and instrumentation Engineering, Shri G. S. Institute of Technology
More informationChapter 6. Case Study: 2.4-GHz Direct Conversion Receiver. 6.1 Receiver Front-End Design
Chapter 6 Case Study: 2.4-GHz Direct Conversion Receiver The chapter presents a 0.25-µm CMOS receiver front-end designed for 2.4-GHz direct conversion RF transceiver and demonstrates the necessity and
More informationAnalog front-end electronics in beam instrumentation
Analog front-end electronics in beam instrumentation Basic instrumentation structure Silicon state of art Sampling state of art Instrumentation trend Comments and example on BPM Future Beam Position Instrumentation
More informationMaster of Comm. Systems Engineering (Structure C)
ENGINEERING Master of Comm. DURATION 1.5 YEARS 3 YEARS (Full time) 2.5 YEARS 4 YEARS (Part time) P R O G R A M I N F O Master of Communication System Engineering is a quarter research program where candidates
More informationDay 1 : Tuesday, 31st October 2017 (Tutorial) Vanue: Centre for Advanced and Professional Education (CAPE), Universiti Teknologi PETRONAS (UTP)
Day 1 : Tuesday, 31st October 2017 (Tutorial) Vanue: Centre for Advanced and Professional Education (CAPE), Universiti Teknologi PETRONAS (UTP) Time Start Time End Venue: 8:00 9:00 Registration 9:00 17:00
More informationDesign of Low Voltage Low Power CMOS OP-AMP
RESEARCH ARTICLE OPEN ACCESS Design of Low Voltage Low Power CMOS OP-AMP Shahid Khan, Prof. Sampath kumar V. Electronics & Communication department, JSSATE ABSTRACT Operational amplifiers are an integral
More informationSubject-wise Tests Tests will be activated at 06:00 pm on scheduled day
Subject Name EC-01 Control Systems EC-02 Signals & Systems EC-03 Digital Electronics and Micro-Processors EC-04 Engineering Mathematics and Numerical Analysis EC-05 Network Theory EC-06 Basics of Energy
More informationBrief Course Description for Electrical Engineering Department study plan
Brief Course Description for Electrical Engineering Department study plan 2011-2015 Fundamentals of engineering (610111) The course is a requirement for electrical engineering students. It introduces the
More informationCHAPTER 2 DESIGN AND MODELING OF POSITIVE BUCK BOOST CONVERTER WITH CASCADED BUCK BOOST CONVERTER
17 CHAPTER 2 DESIGN AND MODELING OF POSITIVE BUCK BOOST CONVERTER WITH CASCADED BUCK BOOST CONVERTER 2.1 GENERAL Designing an efficient DC to DC buck-boost converter is very much important for many real-time
More informationA Review of Phase Locked Loop Design Using VLSI Technology for Wireless Communication.
A Review of Phase Locked Loop Design Using VLSI Technology for Wireless Communication. PG student, M.E. (VLSI and Embedded system) G.H.Raisoni College of Engineering and Management, A nagar Abstract: The
More informationDesign of DC-DC Boost Converter in CMOS 0.18µm Technology
Volume 3, Issue 10, October-2016, pp. 554-560 ISSN (O): 2349-7084 International Journal of Computer Engineering In Research Trends Available online at: www.ijcert.org Design of DC-DC Boost Converter in
More informationDesign of a Low Noise Amplifier using 0.18µm CMOS technology
The International Journal Of Engineering And Science (IJES) Volume 4 Issue 6 Pages PP.11-16 June - 2015 ISSN (e): 2319 1813 ISSN (p): 2319 1805 Design of a Low Noise Amplifier using 0.18µm CMOS technology
More informationON-CHIP TECHNOLOGY INDEPENDENT 3-D MOD- ELS FOR MILLIMETER-WAVE TRANSMISSION LINES WITH BEND AND GAP DISCONTINUITY
Progress In Electromagnetics Research B, Vol. 22, 171 185, 2010 ON-CHIP TECHNOLOGY INDEPENDENT 3-D MOD- ELS FOR MILLIMETER-WAVE TRANSMISSION LINES WITH BEND AND GAP DISCONTINUITY G. A. Wang, W. Woods,
More informationDesign and Implementation of Modern Digital Controller for DC-DC Converters
Design and Implementation of Modern Digital Controller for DC-DC Converters S.Chithra 1, V. Devi Maheswaran 2 PG Student [Embedded Systems], Dept. of EEE, Rajalakshmi Engineering College, Chennai, Tamilnadu,
More informationEmbedded Sensors. We can offer you complete solutions for intelligent integrated sensor systems.
FRAUNHOFER-Institute For integrated Circuits IIS INTEGRATED CIRCUITS AND SYSTEMS ICS FROM AN IDEA TO A FINISHED PRODUCT WE ARE: CUSTOMER- ORIENTED PROFESSIONAL TIME-TO-MARKET- FOCUSED NETWORKED WE OFFER:
More informationMixed-Signal Simulation of Digitally Controlled Switching Converters
Mixed-Signal Simulation of Digitally Controlled Switching Converters Aleksandar Prodić and Dragan Maksimović Colorado Power Electronics Center Department of Electrical and Computer Engineering University
More informationA Dual Half-bridge Resonant DC-DC Converter for Bi-directional Power Conversion
A Dual Half-bridge Resonant DC-DC Converter for Bi-directional Power Conversion Mrs.Nagajothi Jothinaga74@gmail.com Assistant Professor Electrical & Electronics Engineering Sri Vidya College of Engineering
More informationIN RECENT years, low-dropout linear regulators (LDOs) are
IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II: EXPRESS BRIEFS, VOL. 52, NO. 9, SEPTEMBER 2005 563 Design of Low-Power Analog Drivers Based on Slew-Rate Enhancement Circuits for CMOS Low-Dropout Regulators
More informationDual-band LNA Design for Wireless LAN Applications. 2.4 GHz LNA 5 GHz LNA Min Typ Max Min Typ Max
Dual-band LNA Design for Wireless LAN Applications White Paper By: Zulfa Hasan-Abrar, Yut H. Chow Introduction Highly integrated, cost-effective RF circuitry is becoming more and more essential to the
More informationPackaged mm-wave GaN, GaAs and Si ICs for 5G and automotive radar
Packaged mm-wave GaN, GaAs and Si ICs for 5G and automotive radar Eric Leclerc UMS 1 st Nov 2018 Outline Why heterogenous integration? About UMS Technology portfolio Design tooling: Cadence / GoldenGate
More informationCHAPTER 7 HARDWARE IMPLEMENTATION
168 CHAPTER 7 HARDWARE IMPLEMENTATION 7.1 OVERVIEW In the previous chapters discussed about the design and simulation of Discrete controller for ZVS Buck, Interleaved Boost, Buck-Boost, Double Frequency
More information