PROJECTS AVAILABLE FOR SEMESTER I ( ) (Study Project/ Laboratory Project/ Design Project)

Transcription

1 Department of Electrical and Electronics Engineering PROJECTS AVAILABLE FOR SEMESTER I ( ) (Study Project/ Laboratory Project/ Design Project) Name of Faculty Title of Project Serial no. of Project Skill Set required Expected Outcome Prof. Navneet Gupta 1) 3D NEGF Quantum transport simulation for modeling ballistic transport in nano FinFETs. 2) Study on the impact of dielectrics and oxide thickness on the performance of CNT FETs. 2018FS0101 Preference for student who have done Modeling of Field Effect Devices course 2018FS0102 Knowledge of 3) Study of Quantum transport behaviour of CNT FETs using Atomistix Tool Kit (ATK). 4) Performance analysis of nanoscale multi gate FinFETs. 5) Modeling of MOSFET short channel effects using voltagedoping transformation (VDT) approach. 6) Modelling of Graphene based sensor and devices. 2018FS0103 Knowledge of 2018FS0104 Preference for student who have done Modeling of Field Effect Devices course 2018FS0105 Knowledge of 2018FS0106 Knowledge of Good Quality Research paper for all topics Prof. Chandra Shekhar 1) VLSI architecture for high performance real-time applications (students can approach and discuss) 2) VLSI Architecture (students can approach and discuss specific problem statement) 3) Advance computing architectural techniques (students can approach and discuss specific problem statement) 4) RF Microelectronics (students can approach and discuss specific problem statement) 2018FS FS FS FS0204 Computer Architecture/ VLSI Architecture

2 Prof. V K Chaubey Prof. Anu Gupta 1) Study, design and simulation analysis of optical / wireless link/systems 2) Device modeling ( Electronic /Optoelectronic/ nanoelectronic/photonic and related areas) 1) Design and analysis of enhanced linearity Analog System 2) Design and analysis of Nanometer SRAM ib subthreshold region 3) A novel CMOS operational transconductance amplifier based on a mobility compensation technique 2018FS FS FS FS FS0303 Related courses/electives done ( preferably in 3 rd year) (students should discuss the area/problem to ensure his interest) Concepts of course Microelectronic Circuits & Analog & digital VLSI Design Concepts of course Microelectronic Circuits & Analog & digital VLSI Design Concepts of course Microelectronic Circuits & Analog & digital VLSI Design Understandin g the problem and steps to find the solutions. In case of sufficient findings attempt for publication.,,,,,, 4) Design Of Low Voltage Low Power Self Biased Cmos Current Reference 5) Design of Differential Power Attack immune Circuits for robust data encryption. 6) Design of FINFET circuits for high performance in nanometer range 7) Study, analysis and design of high performance MOS switch 2018FS FS FS FS0307 Concepts of course Microelectronic Circuits & Analog & digital VLSI Design Concepts of course Microelectronic Circuits & Analog & digital VLSI Design,,,,,, 8) Study, analysis and design of high performance self cascode MOSFET structure 2018FS0308 9) ////Analog Design///// (To Be Discussed) 10) Design of an IOT system for smart project managemen 2018FS FS FS0312

3 Prof. H. D. Mathur 1) Implications of Vehicle to Grid, in microgrid scenario. IoT application in smart grid scenario. 2) Smart Integration of Renewable sources of Energy 2018FS FS0802 Commitment (Mandatory) and Well versed with MATLAB/Simulink, particularly Simpowersystem toolbox, Communication toolbox. Understanding of DSP will have an added advantage (but not necessary). Quality journal publication/ Prototype for design project Prof. Hari Om Bansal 1) Study on Charging infrastructure for PHEVs 2) Design of Energy Optimization strategies for Plug in Hybrid Electric Vehicles 3) Design and development of Vehicle to Grid Technologies 2018FS0701 Electrical Sc, Control Systems, 2018FS0702 Power Electronics 2018FS0703 journal indexed)/con ference paper). 4) Development of Maximum power point tracking (MPPT) Algorithms for PV systems 5) Integration and control of hybrid renewable energy system 2018FS FS0705 6) Design and Development of Bidirectional Converters for Hybrid Vehicle applications 7) Control and balancing of Bots/Manipulators 2018FS FS0707 8).Development of a hybrid energy storage system for HEV applications 9) Self-Balancing of a Bike using Gyroscope and Data Driven PID controller 2018FS0708 Electrical Sc, Control Systems, Power Electronics 2018FS0709 journal indexed)/con ference paper). Dr. K. K. Gupta 1) Water Quality Assessment 2018FS1001 CGPA > 8.0 2) Smart Water Grid 2018FS1002 Knowledge of Signal Processing; 3) Bearing Health Monitoring 2018FS1003 Image processing 4) Multimodal Biometric 2018FS1004 Techniques using thermal and visible Facial Images 5) Compressed Domain Video 2018FS1005 Analysis 6) Structural Health Monitoring 2018FS1006 a standard IEEE

4 Dr. Kumar Rajneesh 1) Development of intellectual Energy concept for AI training 2018FS1101 CGPA > 8.5, Prior knowledge of AI Techniques SCI index journal Dr. Rahul Singhal Dr. Praveen Kumar A.V. 2) Development of smart power electronics systems 3) Development of optimal mesh network architecture for Internet of Photovoltaics (IoPV) 1) Infrared Communications in Free Space 2) Patch Antenna Design and Analysis 3) Passive/Active Photonic Device Design and Analysis 1) Computation of Diffraction coefficient for finite ground plane antennas [Study project ] 2) Higher order mode antenna design [Study project (simulation based)] 3) Miniaturized antenna design for IoT [Design project, (Simulation)] 4) Food adulteration detection using microwaves 2018FS1102 CGPA > 8.5, prior knowledge of power Working prototype electronics and control systems 2018FS1103 CGPA > 8.5, prior knowledge of a IEEE communication systems etc. 2018FS1501 CGPA 7.0 Simulation Schematic & 2018FS1502 National/Inter national 2018FS1503 Paper 2018FS1301 Very good in coding (C, Python or MATLAB) 2018FS1302 Good in Electromagnetic theory, CAD tools 2018FS1303 Good in Electromagnetic theory, CAD tools 2018FS1304 Good in Electromagnetic theory, Experiments * Submit at least a paper * Generate ideas for project proposals etc Dr.Anantha Krishna Chintanpalli Dr. Bitragunta Sainath 1) Implementation of DSP algorithm using TMS320C6748. (co-supervisor) - Mr.Harshavardhan 2) Spectral features extraction of PCG signals. 1) Energy efficient unmanned aerial vehicle communication protocol design and analysis 2018FS1801 CGPA > 8.5 MATLAB Signals 2018FS1802 Systems/DSP 2018FS1601 and Probability, random variables, random processes, digital communication, networks, Ability to learn new simulation tools (eg. MATLAB, NetSim) CGPA > 7.5 (UG), 8.0 (PG) signal processing (SCI- Indexed). Journal (Scopus/SCI)/ IEEE

5 Dr. HAZRA ARNAB Dr. Pawan K. Ajmera 2) Energy harvesting millimeter wave cooperative communication system design and performance analysis 3) Energy efficient cooperative optical wireless system design and performance analysis 4) Simultaneous power and data transfer in energy harvesting cooperative system: novel protocol design and analysis 1) Study on Graphene Field Effect Transistors for Gas-sensing Application 2) Study on Multilayer Graphene Nanoribbon for On-Chip Interconnects 2018FS FS FS FS FS1702 Probability, random variables, random processes, digital communication, Ability to learn new simulation tools eg. MATLAB, NetSim), CGPA > 7.5 (UG), 8.0 (PG) Probability, random variables, random processes, digital communication, Ability to learn new simulation tools eg. MATLAB, NetSim), CGPA > 7.5 (UG), 8.0 (PG) Probability, random variables, random processes, digital communication, information theory, Ability to learn new simulation tools eg. MATLAB, NetSim), CGPA > 7.5 (UG), 8.0 (PG) CGPA>8.0 Skill: Devices 1) Biomedical signals processing. 2018FS1901 CGPA > 8.0 2) Application of Image processing in Biomedical. 3) Study of Biometric system: Face 4) Study of Biometric system: Fingerprint 5) Study of Biometric system: Voice 6) Study of Biometric system: Iris 2018FS FS FS FS FS1906 Electronic Knowledge of Matlab and Signal processing Journal (Scopus/SCI)/ IEEE Journal (Scopus/SCI) Journal (Scopus/SCI)/ IEEE Peer Reviewed Journal Paper/ Proceedings Journal paper indexed) Prototype 7) Study of Biometric system: Palm print 2018FS1907

6 Dr. Mahesh Angira Mr. Kavindra Kandpal 8) Biometric system: Face 9) Biometric system: Fingerprint 10) Biometric system: Voice 11) Biometric system: Iris 12) Biometric system: Palm print 13) Design of Multimodal Biometric system 14) Design of Unimodal Biometric system 1) Study on RF MEMS technology based phase shifter.(study PROJECT) 2) Study of contact materials for Ohmic RF MEMS Switches. (STUDY PROJECT) 3) Study of resonator and filters using RF- MEMS technology. (STUDY PROJECT) 4) Study of RF MEMS Technology based shunt capacitive switches. (STUDY PROJECT) 5) Design of Reconfigurable antenna using RF- MEMS Switches. (DESIGN PROJECT) 6) Design of Mutli-Port switches (capacitive/ohmic) using RF MEMS technology. (DESIGN PROJECT) 7) Design of RF MEMS technology based shunt capacitive switches.(design PROJECT) 8) RF MEMS technology based phase shifter. (RP) 9) Design of Reconfigurable antenna using RF MEMS Switches.(RP) 1) Compact modelling of oxide thin film transistor for display applications. 2). Gate dielectric material selection for SnO2/ In2O3 thin film transistor 2018FS FS FS FS FS FS FS FS FS FS FS FS FS FS2307 CGPA > 8 CGPA > FS2308 CGPA > 8 Knowledge of Microwave and MEMS Technology 2018FS FS FS2802 SPICE, MATLAB, Electronic devices, Microelectronics Knowledge of a new technology indexed)/ Knowledge of new technology indexed)/ Knowledge of a new technology SCI Journals/ SCOPUS indexed s.

7 3) Dielectric material selection for DRAMs. 2018FS2803 Mr. Samaiya Devesh 4) Effect of grain boundary and interface traps on threshold voltage of oxide TFT. 5) CMOS Analog IC design using UMC 90 nm Technology (topics will be discussed with students) 6) SPICE modelling of oxide TFT and design of pixel driving circuitry. 7) piezoelectric materials for Micro-Electro-Mechanical Systems (MEMS): Current status and prospective (With CEERI Pilani) 8) Magnetostrictive materials for Micro-Electro-Mechanical Systems (MEMS) applications (With CEERI Pilani) 1) Design of display controller for LED matrix panels 2018FS2804 SPICE, MATLAB, Electronic devices, Microelectronics 2018FS2805 Cadence EDA tool, ADVD, strong motivation for analog profile 2018FS2806 Microelectronics/ interest in display electronics 2018FS2807 MEMS/ Electronic Devices 2018FS2808 MEMS/ Electronic Devices 2018FS2901 Experience in microcontroller programming and interfacing is a must Working Prototype 2) Foreground segmentation techniques in H.265/ HEVC compressed videos 2018FS2902 Basics of image and video processing Publication 3) Design of flash programmer shield for Arduino 2018FS2903 Hands on experience in PCB designing, Arduino and C++ Mr. K. Babu Ravi Teja Mr. Jahagirdar Ankush 1) Contact Resistance effects in OTFT: Modelling, Extraction and Mitigation 2) OTFT device reliability issues 3) III-V Semiconductor Devices, Modelling and Device Structure Optimization 1) On Model Predictive Controller (MPC) Tuning 2018FS FS FS FS3301 Sound understanding of device physics and inclination to research Sound understanding of device physics and inclination to research Soundunderstanding of device physics and inclination to research Good coding skills, exposure to MATLAB, good in Maths, Control paper (IEEE or equivalent)

8 Systems 2) On Simulation Study of Sliding Mode Control 3) On Implementation of Fourier Neural Networks/ Wavelet Neural Networks 2018FS FS3303 Good coding skills, exposure to MATLAB, good in Maths, Control Systems Good coding skills, exposure to MATLAB, Python (IEEE or equivalent) (IEEE or equivalent) Mr. Harshavardhan S 1) License plate system using neural networks 2) Coded Exposure photography in Motion deblurring 2018FS3101 CGPA > 8.0, Prior knowledge of Image processing and Matlab. 2018FS3102 a IEEE. Mr. Ashish Patel 1) Study on control of solar PV integrated Active Power Filters 2018FS3201 CGPA>8.0, Control Systems, Power Electronics, Matlab/SimulinK indexed) Dr. Puneet Mishra 1) Efficient implementation of Fractional order operators. Dr. Yenuganti Sujan 2) FPGA based control of power 2018FS3202 CGPA>7.0, Control electronic coverters Systems, Power Electronics, FPGA programming 2018FS2501 CGPA > 8.5, Prior knowledge of digital signal processing, proficiency in MATLAB or LabVIEW, good in data acquisition basics 2) Design of bio-mimicry based 2018FS2502 CGPA > 8.0, Prior global optimization algorithms knowledge of MATLAB or LabVIEW 3) Development of adaptive 2018FS2503 CGPA > 9.0, Prior intelligent control scheme/s for knowledge control applications of Control systems, process control and instrumentation, and proficiency in MATLAB or LabVIEW 1) Piezoelectric Energy harvesting 2018FS2601 CGPA > 8.0, Prior knowledge of piezoelectric basics, mechanical structures and Laboratory prototype Quality an SCI or / SCOPUS index journal a reputed etc or in a SCOPUS indexed journal IEEE

9 vibration based energy harvesting Dr. Vinay Chamola 2) Design and development of Resonance based sensors 1) Physically unclonable function (PUF) implementation 2018FS FS2401 CGPA > 8.0, Prior knowledge of piezoelectric basics and mechanical structures CGPA > 8, Prior knowledge of SRAM, embedded systems, PUF Working prototype Working prototype Dr. Nitin Chaturvedi 2) Advanced optimization techniques 3) Research frontiers in Solar powered cellular networks 1) Design of Nonvolatile SRAM cell for storing multiple bits for runtime context switching for IoT 2018FS FS FS2001 Interest in reading research papers, specifically mathematically oriented and coding them up. CGPA > 8.5 Investigating research challenges and solutions for solar powered cellular networks, CGPA > 8.5 Explanation and simulation of common optimization techniques used in research papers Literature survey and simulating solar powered cellular networks using MATLAB 2) Design of Self-Resetting Latches for Asynchronous Micro-Pipelines 2018FS2002 3) Study/Design and analysis of high speed asynchronous write circuit for non-volatile memory and logic 4) Study and analysis on the potentials of FinFETs for Asynchronous Circuit Design 2018FS FS2004 Good Knowledge of Digital VLSI Design, SPICE, CGPA > 7.5 /jo urnal paper indexed) 5) Design and analysis of reconfigurable cache architecture and cache coherence protocols 2018FS2005

10 6) Study/Design of GaN HEMT Device for biosensing applications Study/Design of GaN HEMT 7) Device for high voltage applications 2018FS FS2007