ELECTRONICS & INFORMATION TECHNOLOGY DEPARTMENT
|
|
- Egbert Chase
- 6 years ago
- Views:
Transcription
1 ELECTRONICS & INFORMATION TECHNOLOGY DEPARTMENT Our Ref: LITD G/25/LITD Subject: Reaffirmation of Indian Standards pertaining to Electronic Components And Modules Sectional Committee, LITD 05. Indian Standards as enclosed in attachment INDIAN STANDARD LIST have been reaffirmed with effect from MARCH 2015 by the concerned Sectional Committee for the period of three years: LIST ENCLOSED Director (Sales)/Director (Library)/Director (Distt.) may please take suitable action for affirming the year of reaffirmation to the above mentioned standards. Director (Sales) Director (Library) Director(Distt.) H (ITS) for host it on intranet. Copy to: i) All Regional Offices All by ii) All Branch Offices iii) All Inspection Offices iv) All Technical Departments in HQ v) All Labs vi) ITS Dept - with the request to upload the information on BIS intranet ( D Goswami) Scientist F & Head(LITD)
2 A) The following Indian Standards have been reaffirmed with effect from March 2015 by the concerned Sectional Committee for the period of three years: Sl. IS 1 1 ISQC : 2000/ IECQC : ISQC : 1988 / IECQC : ISQC : 1985 / IECQC : ISQC : 2000 / IECQC : ISQC : 2000 / IECQC : ISQC : 1993 / IECQC : ISQC : 1993 / IECQC : ISQC : 1988 / IECQC : ISQC : 1988/ IECQC : ISQC : 1992 / IECQC : ISQC : 1992 / IECQC : ISQC : 1995 / IECQC : ISQC : 1995/ IECQC : ISQC : 2000/ IECQC : ISQC : 2000/IECQC : ISQC : 2000/IECQC : ISQC : 2000/IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 1994/IECQC : ISQC : 2000/IECQC : 1989 components (IECQ) - Rules of Part 1: Administration (First revision) Fixed capacitors for use in electronic equipment - Generic specification Fixed capacitors for use in electronic equipment. Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil dc capacitors Fixed capacitors for use in electronic equipment; Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte Blank detail specification: Fixed tantalum capacitors with solid electrolyte and porous anode - Sectional specification for aluminium electrolytic capacitors with solid and non-solid electrolyte Fixed capacitors for use in electronic equipment, Blank detail specification: Aluminium electrolyte capacitors with non-solid electrolytic - Assessment Level E Fixed capacitors for use in electronic equipment Sectional specification. Fixed metalized polyethylene terephthalate film dielectric dc capacitors Blank detail specification: Fixed metallized polyethylene terephthalate film dielectric dc capacitors - Assessment level E Sectional specification for fixed capacitors of ceramic dielectric, Class 1 Blank detail specification for fixed capacitors of ceramic dielectric, Class 1 - Semiconductor devices-integrated circuits-sectional integrated circuits on the basis of capability approval Semiconductor devices-integrated circuits - Blank detail integrated circuits on the basis of capability approval components (IECQ) - Basic Rules (First revision) components (IECQ) - Rules of Part 2: Documentation (First revision) components (IECQ) - Rules of Part 3: Approval Procedures (First revision) components (IECQ) - Guidance documents (First revision) Sectional specification for fixed capacitors of ceramic dielectric, Class 2 Fixed capacitors for used in electronic equipment: Blank detail specification for fixed capacitors of ceramic dielectric, Class 2 - Fixed capacitors for use in electronic equipment, Sectional specification for fixed tantalum chip capacitors Fixed capacitors for use in electronic equipment - Blank detail specification for fixed tantalum chip capacitors -
3 Sl. IS ISQC : 1993/IECQC : ISQC : 1993/IECQC : ISQC : 1993/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 1993/IECQC : ISQC : 1988/IECQC : ISQC : 1988/IECQC : ISQC : 1988/IECQC : ISQC : 1992/IECQC : ISQC : 1992/IECQC : ISQC : 1992/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 1993 Mar 2012 / IECQC : ISQC : 1994 / IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 2000/IECQC : ISQC : 1992/IECQC : ISQC : 1992/IECQC :1989 Sectional specification for fixed metallized polypropylene film dielectric dc capacitors Fixed capacitors for use in electronic equipment : Blank detail specification for fixed metallized polypropylene film dielectric dc capacitors - Asseement Level E Blank detail specification for fixed metallized polypropylene film dielectric ac and pulse capacitors - Fixed capacitors for use in electronic equipment - Sectional specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains Fixed capacitors for use in electronic equipment - Blank detail specification for fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level D Generic specification for fixed film resistors networks for use in electronic equipment Sectional specification for fixed film resistors networks of assessed quality on the basis of capability approval Blank detail specification for fixed film resistors networks of assessed quality on the basis of capability approval. Fixed resistors for use in electronic equipment: Generic specification Fixed resistors for use in electronic equipment: Sectional specification for fixed low-power non-wire-wound resistors Fixed resistors for use in electronic equipment. Blank detail specification: Fixed low-power non-wire-wound resistors assessment level E Fixed resistors for use in electronic equipment. Sectional specification: Fixed power resistors Fixed resistors for use in electronic equipment, Sectional specification: Fixed precision resistors Fixed resistors for use in electronic equipment. Blank detail specification for fixed precision resistors - Assessment Level E Sectional specification for fixed resistor networks with individually measurable resistors Blank detail specification for fixed resistor networks with individually measurable resistors all of equal value and equal dissipation - Blank detail specification: Fixed resistor networks with individually measurable resistor of either different resistance values or different rated dissipations - Sectional specification for fixed resistor networks in which not all resistors are individually measurable Blank detail specification for fixed resistor networks in which not all resistors are individually measurable, Sectional specification for fixed chip resistors Blank detail specification for fixed chip resistors Potentiometers for use in electronic equipment - Generic specification Potentiometers for use in electronic equipment : Sectional specification - Lead screw actuated and rotary preset potentiomenters Potentiometers for use in electronic equipment Blank Detail specification - Lead screw actuated and rotary preset potentiometers -
4 Sl. IS ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 1994/IECQC : ISQC : 1993/IECQC : ISQC : 1993/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1992/IECQC : ISQC : 1994/IECQC : ISQC : 1994/IECQC : ISQC : 1995 / IECQC : ISQC : 1995/IECQC : ISQC : 1995/IECQC (1992) ISQC : 1995/IECQC (1992) ISQC : 1995 Mar 2012 / IECQC : ISQC : 1993/IECQC :1991 Varistors for use in electronic equipment: Generic specification Varistors for use in electronic equipment: Sectional specification for surge suppression varistors Blank detail specification for silicon carbide surge suppression varistors - Blank detail specification for zinc oxide surge suppression varistors - Generic specification for directly heated positive step function temperature coefficient thermistors Blank detail specification for directly heated positive step function temperature coefficient thermistors - transistors - Blank detail specifications for Bipolar transistors for switching applications Semiconductor devices, discrete devices: Signal(including switching) & regulator diodes, Blank Detail spec for voltage regulator diodes & voltagereference diodes, excluding temperature-compensated precision reference diodes transistors - Blank detail specifications for case-rated bipolar transistors for high frequency applications Semiconductor devices, discrete devices: Part 2 Rectifier diodes section 1, Blank detail specification for rectifier diodes (including avalanche rectifier diodes) ambient and case-rated up to 100 A transistors - Blank detail specification for bidirectional triode thyristors (triacs) ambient or case-rated 100 A Semiconductor devices - Integrated circuits - Generic integrated circuits Semiconductor devices-integrated circuits-sectional integrated circuits on the basis of qualification approval Semiconductor devices-integrated circuits Blank detail integrated circuits on the basis of qualification approval Semiconductor devices-integrated circuits, Digital integrated circuits, Blank detail specification for HCMOS digital integrated circuits (series 54/74 HC, 54/74 HCT, 54/74 HCU) Semiconductor devices-integrated circuits, Digital integrated circuits, Blank detail specification for complementary MOS digital integrated circuits (series B and UB) Semiconductor devices-integrated circuits, Digital integrated circuits, Blank detail specification for bipolar monolithic digital integrated circuit gates (excluding uncommitted logic arrays) transistors - Blank detail specifications for monolithic integrated operational amplifiers IS 590:1964/IEC 40(CO)107 Fixed paper dielectric capacitors for dc (revised) IS 824:1965/IEC 63:1963 Preferred values for resistors and capacitors (revised) IS 1885(Part 45):1977/IEC 50(516) Electrotechnical vocabulary: Part 45 Capacitors IS 2001:1968/IEC 2001:1968 Fixed silvered mica capacitors (first revision) IS 2786(Part 1):1978/IEC 40(Sectt)278 Specification for ceramic dielectric capacitors, type 2: Part 1 General requirements and methods of tests (first revision)
5 Sl. IS IS 2786(Part 2):1984 Specification for ceramic dielectric capacitors, type 2 : IS 3671(Part 1):1980/IEC 40(Sectt)140 Part 2 FCCG 01 and FCCG 02 capacitors Air dielectric variable tuning capacitors: Part 1 Tests and general requirements (first Revision) IS 3700(Part 7):1970/IEC 147-1B Essential ratings and characteristics of semiconductor devices: Part 7 Reverse blocking triode thyristors IS 3715(Part 4):1971/IEC Letter symbols for semiconductor devices: Part IS 3723(Part 1):1978/IEC 40(Sectt)1355 Thyristors (first revision) Capacitors for radio interference suppression: Part 1 General requirements and methods of tests (first revision) IS 3723(Part 2):1983 Capacitors for radio interference suppression : Part 2 Type FCRS IS 3723(Part 3):1983 Capacitors for radio interference suppression: Part 3 Type FCRS IS 4317:1983/IEC 384-4:1977 Aluminium electrolytic capacitors with non-solid electrolytic (second revision) IS 4400(Part 7):1971 Methods of measurements on semiconductor devices: Part 7 Reverse blocking triode thyristors IS 4411:1967 Code for designation of semiconductor devices IS 4570(Part 5):1999/IEC : IS 4570(Part 9):1999/IEC 122-3(1977) Crystal unit holders: Part 5 Metal, solder seal, two-wire crystal unit holders Types BF, BF/1 and BG, BG/1(First revision) Crystal unit holders: Part 9 Metal, welded, two pin crystal unit holders Type DN (First revision) IS 4633:1968/IEC 166 Fixed metallized-paper dielectric capacitors for direct current IS 5001(Part 1):1969/IEC Guide for preparation of drawings of semiconductor devices and integrated circuits: Part 1 Semiconductor devices Guide for preparation of drawings of semiconductor devices and integrated circuits: Part 2 Integrated circuits IS 5001(Part 2):1973/IEC 47(CO) IS 5027:1969/IEC 195 Method of measurement of current noise generated in IS 5469(Part 1):1969/BS CP 7016(Pt 1):196 fixed resistors Code of practice for the use of semiconductor junction devices: Part 1 Applicable to all devices IS 5469(Part 2):1973/BS 71/20573 Code of practice for the use of semiconductor junction devices: Part 2 Diodes IS 5469(Part 3):1973/BS 71/20573 Code of practice for the use of semiconductor junction IS 5475(Part 1):1978/IEC 40(CO)363 devices: Part 3 Thyristors Polystyrene film dielectric capacitors: Part 1 General requirements and methods of tests (first revision) IS 5475(Part 2):1979/JSS Polystyrene film dielectric capacitors: Part 2 Type FCPS IS 5475(Part 4):1985 Polystyrene film dielectric capacitors: Part 4 Type FCPS IS 5575(Part 2):1978 Temperature control devices for quartz crystal units (heating type): Part 2 Pin connections and bases IS 5786(Part 1):1978/IEC Fixed resistors general purpose low power: Part 1 General requirements and methods of tests (first revision) IS 5786(Part 3):1982 Fixed resistors general purpose low power: Part 3 Mar 2012 Resistors Type FRLP - 2 (first revision) IS 5786(Part 4):1982 Fixed resistors general purpose low power: Part 4 Mar 2012 Resistors Type FRLP - 3 (first revision) IS 5786(Part 5):1982 Fixed resistors general purpose low power: Part 5 Mar 2012 Resistors Type FRLP - 4 (first revision) IS 5786(Part 6):1982 Fixed resistors general purpose low power: Part 6 Mar 2012 Resistors Type FRLP - 5 (first revision) IS 5786(Part 7):1982 Fixed resistors general purpose low power: Part 7 Mar 2012 Resistors Type FRLP - 6 (first revision) IS 5786(Part 10):1982 Fixed resistors general purpose low power: Part 10 Resistors Type FRLP - 9 (first revision) IS 5786(Part 12):1982 Fixed resistors general purpose low power: Part 12 Resistors Type FRLP - 11 (first revision) IS 6133(Part 1):1971 Piezoelectric filters for use in telecommunication and measuring equipment: Part 1 General requirements and tests
6 Sl. IS IS 6553:1971/IEC 47Sectt)445 Environmental requirements for semiconductor devices and integrated circuits IS 7305:1984/IEC 384-1:1972 Fixed capacitors used in electronic equipment (first revision) IS 7412:1974/IEC 47 (CO) 437 Life testing of semiconductor devices IS 7440(Part 2):1974/IEC147-1E73&147-1: IS 7440(Part 3/Sec 1):1976 / IEC 147-1E(1973) IS 7440(Part 3/Sec 2):1977 / IEC 147-1E(1973) IS 7748(Part 1):1975 IEC 418-1:1974 Essential ratings and characteristics of analogue integrated circuits: Part 2 Telecommunication amplifiers (audio, video and multichannel) Essential ratings and characteristics of analogue integrated circuits: Part 3 Operational amplifier, Sec 1 Having two input and one output Essential ratings and characteristics of analogue integrated circuits: Part 3 Operational amplifier, Sec 2 Having two input and two outputs Variable capacitors: Part 1 Tests and general requirements IS 8083:1976/IEC 234A:1970 Dimensions of ceramic dielectric capacitors of the plate type IS 8186:1976/IEC 62(1974) Marking codes for values and tolerance of resistors and capacitors (superseding IS 825:1956 and IS 4114:1967) IS 8238:1976/IEC 40A(Sectt)325 Guide for use of variable capacitors in electronic equipment IS 8507(Part 1):1977 Fixed insulated hermetically sealed tantalum capacitors with solid electrolyte : Part 1 General requirements and methods of tests IS 8507(Part 2/Sec 1):1981 Fixed insulated hermatically sealed tantalum capacitors with solid electrolyte : Part 2 Type FCST 1, Sec 1 Polar IS 8507(Part 2/Sec 2):1982 Fixed insulated hermetically sealed tantalum capacitors with solid electrolyte : Part 2 Type FCST 1, Sec 2 Nonpolar IS 8507(Part 3/Sec 1):1981 Fixed insulated hermetically sealed tantalum capacitors with soild electrolyte : Part 3 Type FCST 2, Sec 1 Polar IS 8507(Part 3/Sec 2):1982 Fixed insulated hermetically sealed tantalum capacitors with solid electrolyte : Part 3 Type FCST 2, Sec 2 Nonpolar IS 8507(Part 4/Sec 1):1983 Fixed insulated hermetically sealed tantalum capacitors IS 8872(Part 1):1977/IEC 393-1(1970) with solid electrolyte : Part 4 Type FCST 3, Sec 1 Polar Variable resistors: Part 1 General requirements and methods of tests [superseding IS 2934(Part 1): IS 8872(Part 2/Sec 1):1979 Variable resistors: Part 2 General purpose, Sec 1 Type VRG 1C IS 8872(Part 2/Sec 2):1979 Variable resistors: Part 2 General purpose, Sec 2 Type VRG 2C IS 8872(Part 2/Sec 3):1979 Variable resistors: Part 2 General purpose, Sec 3 Type VRG 3C IS 8872(Part 2/Sec 4):1979 Variable resistors: Part 2 General purpose, Sec 4 Type VRG 4P IS 8872(Part 2/Sec 5):1980 Variable resistors: Part 2 General purpose, Sec 5 Type VRG 5C IS 8872(Part 2/Sec 6):1980 Variable resistors: Part 2 General purpose, Sec 6 Type IS 8872(Part3/Sec1):1979/JSS IS 8872(Part 3/Sec 2):1979 JSS VRG 6C Variable resistors: Part 3 Precision, Sec 1 Type VRG 1P Variable resistors: Part 3 Precision, Sec 2 Type VRP 2P IS 8872(Part 4/Sec 1):1980 Variable resistors: Part 4 Preset, Sec 1 Type VRT 1P IS 8872(Part 4/Sec 2):1983 Variable resistors: Part 4 Preset, Sec 2 Type VRT 2P JSS IS 8872(Part 4/Sec 3):1982 Variable resistors: Part 4 Preset, Sec 3 Type VRT IS 8872(Part 4/Sec 4):1984 Variable resistors: Part 4 Preset, Sec 4 Type VRT IS 8872(Part 4/Sec 5):1984 JSS Variable resistors: Part 4 Preset, Sec 5 Type VRT
7 B) The following Indian Standards have been reaffirmed during the month of September 2014 by the concerned Sectional Committee for the period of three years up to September 2017: Sl. IS 1 25 ISQC : 2001/IECQC : ISQC : 2001/IECQC : ISQC : 1989/IECQC :1986 Fixed capacitors use in electronic equipment, Sectional specification fixed polypropylene film dielectric metal foil dc capacitors Fixed capacitor use in electronic equipment: Blank detail specification: Fixed polypropylene film dielectric metal foil dc capacitors - Semiconductors devices Discrete devices, Bipolar transistors Blank detail specification for ambient rated bipolar transistors for low and high frequency amplification C) The following Indian Standards have been reaffirmed during the month of February 2014 by the concerned Sectional Committee for the period of three years up to February 2017: Sl. IS IS 10424:1982 Guide for design and use of printed boards Feb IS 10477:1982 / JSS 51400(Pt 2) Environmental testing s for microcircuits
Part Derating Parameters
Part Derating Parameters Capacitors Fixed Aluminum (Electrolytic) Fixed Ceramic Fixed Mica/Glass Fixed Paper/Plastic Fixed Tantalum (Non- Solid) Reverse Voltage Fixed Tantalum (Solid) Reverse Voltage Variable
More informationMatrix Multimedia Limited Tel Fax
matrix multimedia Electronic Circuits and Components v2.0 Course material with Virtual Laboratories that stimulate, teach & test. This second version of Electronic Circuits and Components is bigger and
More informationElectronic Components. Identification of components and handling precautions to protect them from damage due to electrostatic discharge
Electronic Components Identification of components and handling precautions to protect them from damage due to electrostatic discharge 1 Passive Components Resistors Capacitors Inductors Diodes Interface
More information4/30/2012. General Class Element 3 Course Presentation. Circuit CoCircuit Componentsmponents. Subelement G6. 3 Exam Questions, 3 Groups
General Class Element 3 Course Presentation ti ELEMENT 3 SUB ELEMENTS General Licensing Class Subelement G6 Circuit Components 3 Exam Questions, 3 Groups G1 Commission s Rules G2 Operating Procedures G3
More informationInstant MTBF Data Input Sheet Commercial / Bellcore TR Integrated Circuits, Bipolar, Digital
Instant MTBF Data Input Sheet Commercial / Bellcore TR-332 Probabilistic Software, Inc. http://www.e-mtbf.com System / Equipment Name: Assembly Name: Quantity Of This Assembly: Parts List Number: Environment:
More informationSemiconductors, ICs and Digital Fundamentals
Semiconductors, ICs and Digital Fundamentals The Diode The semiconductor phenomena. Diode performance with ac and dc currents. Diode types: General purpose LED Zener The Diode The semiconductor phenomena
More informationIntegrated diodes. The forward voltage drop only slightly depends on the forward current. ELEKTRONIKOS ĮTAISAI
1 Integrated diodes pn junctions of transistor structures can be used as integrated diodes. The choice of the junction is limited by the considerations of switching speed and breakdown voltage. The forward
More informationWINTER 14 EXAMINATION. Model Answer. Subject Code: ) The answers should be examined by key words and not as word-to-word as given in the
Subject Code: 17215 WINTER 14 EXAMINATION Model Answer Important Instructions to examiners: 1) The answers should be examined by key words and not as word-to-word as given in the model answer scheme. 2)
More information2 Marks - Question Bank. Unit 1- INTRODUCTION
Two marks 1. What is power electronics? EE6503 POWER ELECTRONICS 2 Marks - Question Bank Unit 1- INTRODUCTION Power electronics is a subject that concerns the applications electronics principles into situations
More informationDigital Electronics Part II - Circuits
Digital Electronics Part II - Circuits Dr. I. J. Wassell Gates from Transistors 1 Introduction Logic circuits are non-linear, consequently we will introduce a graphical technique for analysing such circuits
More informationElectronic Components (Elements)
Lecture_3 Electronic Components (Elements) Instructor: IBRAHIM ABU-ISBEIH 25 July 2011 Reverse Engineering 1 Objectives: After completing this class, you will be able to identify the most commonly used
More informationLearn about the use, operation and limitations of thyristors, particularly triacs, in power control
Exotic Triacs: The Gate to Power Control Learn about the use, operation and limitations of thyristors, particularly triacs, in power control D. Mohan Kumar Modern power control systems use electronic devices
More informationSystems Engineering. Passive Components. v1.2 March itic.
Systems Engineering Passive Components Pere Palà itic http://itic.cat v1.2 March 2012 Resistors Resistor Types Resistors Ubiquitous Uncritical Surface mount chip Metal film Carbon Wirewound Precision resistors
More informationCircuit Components Lesson 4 From: Emergency Management Ontario
4.1 Amplifier Fundamentals The role of a amplifier is to produce an output which is an enlarged reproduction of the features of the signal fed into the input. The increase in signal by an amplifier is
More informationPre-certification Electronics Questions. Answer the following with the MOST CORRECT answer.
Electronics Questions Answer the following with the MOST CORRECT answer. 1. The cathode end terminal of a semiconductor diode can be identified by: a. the negative sign marked on the case b. a circular
More informationTechnician Licensing Class T6
Technician Licensing Class T6 Amateur Radio Course Monroe EMS Building Monroe, Utah January 11/18, 2014 January 22, 2014 Testing Session Valid dates: July 1, 2010 June 30, 2014 Amateur Radio Technician
More informationT6A4. Electrical components; fixed and variable resistors, capacitors, and inductors; fuses, switches, batteries
Amateur Radio Technician Class Element Course Presentation ti ELEMENT SUB-ELEMENTS Technician Licensing Class Supplement T Electrical/Electronic Components Exam Questions, Groups T - FCC Rules, descriptions
More informationGCSE Electronics. Scheme of Work
GCSE Electronics Scheme of Work Week Topic Detail Notes 1 Practical skills assemble a circuit using a diagram recognize a component from its physical appearance (This is a confidence building/motivating
More informationOBSOLETE. Replaced by PVA33N. Series PVA33 Microelectronic Power IC BOSFET Photovoltaic Relay Single-Pole, 130mA, 0-300V AC/DC
Replaced by PVA33N Data Sheet No. PD10021E Series PVA33 Microelectronic Power IC BOSFET Photovoltaic Relay Single-Pole, 130mA, 0-300V AC/DC General Description The Photovoltaic AC Relay (PVA) is a single-pole,
More informationBattery Charger Circuit Using SCR
Battery Charger Circuit Using SCR Introduction to SCR: SCR is abbreviation for Silicon Controlled Rectifier. SCR has three pins anode, cathode and gate as shown in the below figure. It is made up of there
More informationElectronic Components
Engineering Project (1) Lecture_2 Electronic Components (Elements) Instructor: Eng. IBRAHIM ABU-ISBEIH 6 March 2012 Eng. Ibrahim Abu-Isbeih 1 Objectives: After completing this class, you will be able to
More informationH01C RESISTORS. Definition statement. References. Limiting references CPC - H01C
H01C RESISTORS Definition statement This place covers: Passive two-terminal electrical components per se that implement electrical resistance as a circuit element, thereby enabling typically a direct proportion
More informationContents. 1. Essential Electronics 1. Preface Acknowledgements
Contents Preface Acknowledgements ix xi 1. Essential Electronics 1 1.1: Current 2 1.2: Voltage 5 1.3: Power 6 1.4: Signals and Averages 7 1.4.1: Mean Average 7 1.4.2: Rectified Average 8 1.4.3: RMS Average
More informationELECTRONICS AND ELECTRICITY
INTRODUCTION ELECTRONICS ND ELECTRICITY The science of Electronics and Electricity makes a very important contribution to our everyday existence. Electricity is concerned with the generation, transmission
More informationSUBELEMENT T6 Electrical components: semiconductors; circuit diagrams; component functions 4 Exam Questions - 4 Groups
SUBELEMENT T6 Electrical components: semiconductors; circuit diagrams; component functions 4 Exam Questions - 4 Groups 1 T6A Electrical components: fixed and variable resistors; capacitors and inductors;
More informationhttp://www.electronics-tutorials.ws/power/triac.html Triac Tutorial and Basic Principles In the previous tutorial we looked at the construction and operation of the Silicon Controlled Rectifier more commonly
More informationCalhoon MEBA Engineering School. Study Guide for Proficiency Testing Industrial Electronics
Calhoon MEBA Engineering School Study Guide for Proficiency Testing Industrial Electronics January 0. Which factors affect the end-to-end resistance of a metallic conductor?. A waveform shows three complete
More informationTeccor brand Thyristors AN1001
A1001 Introduction The Thyristor family of semiconductors consists of several very useful devices. The most widely used of this family are silicon controlled rectifiers (SCRs), Triacs, SIDACs, and DIACs.
More informationEntry Level Assessment Blueprint Electronics Technology
Blueprint Test Code: 4135 / Version: 01 Specific Competencies and Skills Tested in this Assessment: Safety Practices Demonstrate safe working procedures Explain the purpose of OSHA and how it promotes
More information1 FUNDAMENTAL CONCEPTS What is Noise Coupling 1
Contents 1 FUNDAMENTAL CONCEPTS 1 1.1 What is Noise Coupling 1 1.2 Resistance 3 1.2.1 Resistivity and Resistance 3 1.2.2 Wire Resistance 4 1.2.3 Sheet Resistance 5 1.2.4 Skin Effect 6 1.2.5 Resistance
More informationNEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR Department of ELECTRONICS
NEW HORIZON PRE UNIVERSITY COLLEGE LESSON PLAN FOR THE ACADEMIC YEAR 2017 2018 Department of ELECTRONICS I PUC Month: JUNE I 1. INTRODUCTION TO ELECTRONICS Electronics and its scope: Development of vacuum
More informationDownloaded from MILITARY STANDARD CAPACITORS, SELECTION AND USE OF
NOTICE 1 1 March 1985 TO ALL HOLDERS OF MILITARY STANDARD CAPACITORS, SELECTION AND USE OF 1. THE FOLLOWING SECTION OF HAS BEEN REVISED AND SUPERSEDES THE SECTION LISTED: NEW SECTION DATE SUPERSEDED SECTION
More informationAltiumLive 2017: Component selection for EMC
AltiumLive 2017: Component selection for EMC Martin O Hara Victory Lighting Ltd Munich, 24-25 October 2017 Component Selection Passives resistors, capacitors and inductors Discrete diodes, bipolar transistors,
More informationBasic Electronics Refresher
Basic Electronics Refresher Current and Voltage Current is the rate of flowing electric charge in a conductor. Voltage is the potential difference (electric driving force) applied between two points to
More informationWorkshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T.
Workshop Part Identification Lecture N I A G A R A C O L L E G E T E C H N O L O G Y D E P T. Identifying Resistors Resistors can be either fixed or variable. The variable kind are called potentiometers
More informationWhat is a Resistor? Token Electronics Industry Co., Ltd. Version: January 12, Web:
Version: January 12, 2017 What is a Resistor? Web: www.token.com.tw Email: rfq@token.com.tw Token Electronics Industry Co., Ltd. Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New Taipei City, Taiwan,
More informationELECTRONIC DEVICES AND CIRCUITS
ELECTRONIC DEVICES AND CIRCUITS 1. At room temperature the current in an intrinsic semiconductor is due to A. holes B. electrons C. ions D. holes and electrons 2. Work function is the maximum energy required
More informationSemiconductor analyser AS4002P User Manual
Semiconductor analyser AS4002P User Manual Copyright Ormelabs (C) 2010 http://www.ormelabs.com 1 CONTENTS SECTION Page SECTION 1: Introduction... 3 SECTION 2: Features... 3 SECTION 3: Component analysis...
More informationAnalog and Telecommunication Electronics
Politecnico di Torino - ICT School Analog and Telecommunication Electronics F2 Active power devices»mos»bjt» IGBT, TRIAC» Safe Operating Area» Thermal analysis 30/05/2012-1 ATLCE - F2-2011 DDC Lesson F2:
More informationLM79XX Series 3-Terminal Negative Regulators
3-Terminal Negative Regulators General Description The LM79XX series of 3-terminal regulators is available with fixed output voltages of 5V, 12V, and 15V. These devices need only one external component
More informationLM102 LM302 Voltage Followers
LM102 LM302 Voltage Followers General Description The LM102 series are high-gain operational amplifiers designed specifically for unity-gain voltage follower applications Built on a single silicon chip
More informationLM110 LM210 LM310 Voltage Follower
LM110 LM210 LM310 Voltage Follower General Description The LM110 series are monolithic operational amplifiers internally connected as unity-gain non-inverting amplifiers They use super-gain transistors
More informationERICSSONZ LBI-38638C MAINTENANCE MANUAL FOR POWER MODULE 19D902589G1 DESCRIPTION CIRCUIT ANALYSIS TABLE OF CONTENTS FILTERED A+
LBI-38638C MAINTENANCE MANUAL FOR 19D902589G1 TABLE OF CONTENTS Page DESCRIPTION........................................... Front.. Cover CIRCUIT ANALYSIS........................................ Front..
More informationEEL 5245 POWER ELECTRONICS I Lecture #4: Chapter 2 Switching Concepts and Semiconductor Overview
EEL 5245 POWER ELECTRONICS I Lecture #4: Chapter 2 Switching Concepts and Semiconductor Overview Objectives of Lecture Switch realizations Objective is to focus on terminal characteristics Blocking capability
More informationMD300 and MT300. Technical Description
20.11.2000 2 / 24 CONTENTS 1. METER TYPE DESIGNATION... 6 2. TECHNICAL AND FUNCTIONAL DESCRIPTION... 7 2.1. BASIC MEASURING PRINCIPLE... 7 2.2. MEASURING SYSTEM... 7 2.2.1. Energy measurement with a SMART
More informationLM150/LM350A/LM350 3-Amp Adjustable Regulators
LM150/LM350A/LM350 3-Amp Adjustable Regulators General Description The LM150 series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 3A over a 1.2V to 33V output
More informationA Subsidiary of Regal-Beloit Corporation. AC Inverter Terminology
AP200-9/01 Acceleration The rate of change in velocity as a function of time. Acceleration usually refers to increasing velocity and deceleration to decreasing velocity. Acceleration Boost During acceleration,
More information(SMW) Power Wire Wound Chip Resistors
Version: July 31, 2017 Electronics Tech. (SMW) Power Wire Wound Chip Resistors Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F, Zhong Xing Industry
More informationIndustrial Technology Electronics Technologies
2010 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Electronics Technologies Total marks 40 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write using black or blue pen
More information500mA CMOS Ultra Low Dropout Linear Regulator
500mA CMOS Ultra Low Dropout Linear Regulator Description The series are 500mA CMOS ultra low dropout positive voltage regulators which operate from 2.4V to 5.5V input supply. The ultra low dropout linear
More informationINTERACTIVE. data book FREQUENCY CONTROL PRODUCTS. vishay DALE
V I S H A Y I N T E R T E C H N O L O G Y, I N C. INTERACTIVE data book CONTROL PRODUCTS vishay DALE vse-db0020-1012 Notes: 1. To navigate: a) Click on the Vishay logo on any datasheet to go to the Contents
More informationConstruction notes for the symmetrical 400 watt amplifier
Construction notes for the symmetrical 400 watt amplifier Introduction The symmetrical amplifier is an update of one of my designs, which appeared in the Australian electronics magazine Silicon Chip in
More informationISSN (Online): International Journal Of Innovative Research In Management, Engineering And Technology Vol. 1, Issue 4, May 2016 STUNGUN
STUNGUN [1] Abdul Salam A, [2] Rashid O, [3] Rahul KR Yashwanth, [4] Sruthy K [1] abdulsalam.fazilsalam@gmail.com, [2] rashidorakottil@gmail.com, [3] rahulkr1436@gmail.com, [4] sruthykanattil@gmail.com
More informationAN1001. Fundamental Characteristics of Thyristors. Introduction. Basic Operation of a Triac. Basic Operation of an SCR. Basic Operation of a Diac
A1001 Fundamental Characteristics of Thyristors 14 Introduction The thyristor family of semiconductors consists of several very useful devices. The most widely used of this family are silicon controlled
More informationDiagnosing the Future of Medical Applications
Vishay Intertechnology, Inc. Diagnosing the Future of Medical www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components ResistorS OptoelectronicS INDUCTORS
More informationeorex (Preliminary) EP3101
(Preliminary) 150 KHz, 3A Asynchronous Step-down Converter Features Output oltage: 3.3, 5, 12 and Adjustable Output ersion Adjustable ersion Output oltage Range, 1.23 to 37 ±4% 150KHz±15% Fixed Switching
More informationIntegrated Circuits: FABRICATION & CHARACTERISTICS - 4. Riju C Issac
Integrated Circuits: FABRICATION & CHARACTERISTICS - 4 Riju C Issac INTEGRATED RESISTORS Resistor in a monolithic IC is very often obtained by the bulk resistivity of one of the diffused areas. P-type
More informationSwitching and Semiconductor Switches
1 Switching and Semiconductor Switches 1.1 POWER FLOW CONTROL BY SWITCHES The flow of electrical energy between a fixed voltage supply and a load is often controlled by interposing a controller, as shown
More informationAutomotive Body Electronics
Vishay Intertechnology, Inc. Automotive Body Electronics www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components Body Electronics Comfort Controls, Door
More informationNon-Synchronous PWM Boost Controller for LED Driver
Non-Synchronous PWM Boost Controller for LED Driver General Description The is boost topology switching regulator for LED driver. It provides built-in gate driver pin for driving external N-MOSFET. The
More informationLong Loopstick Antenna
Long Loopstick Antenna Wound on a 3 foot length of PVC pipe, the long loopstick antenna was an experiment to try to improve AM radio reception without using a long wire or ground. It works fairly well
More informationDUAL STEPPER MOTOR DRIVER
DUAL STEPPER MOTOR DRIVER GENERAL DESCRIPTION The is a switch-mode (chopper), constant-current driver with two channels: one for each winding of a two-phase stepper motor. is equipped with a Disable input
More informationLM138/LM238 LM338 THREE-TERMINAL 5 A ADJUSTABLE VOLTAGE REGULATORS
LM138/LM238 LM338 THREE-TERMINAL 5 A ADJUSTABLE VOLTAGE REGULATORS GUARANTEED 7A PEAK OUTPUT CURRENT GUARANTEED 5A OUTPUT CURRENT ADJUSTABLE OUTPUT DOWN TO 1.2V LINE REGULATION TYPICALLY 0.005%/V LOAD
More informationSL1117C 1A Low Dropout Positive Voltage Regulator
DESCRIPTION The series of positive fixed regulator is designed to provide 1A with high efficiency. All internal circuitry is designed to operate down to 1.3V input to output differential. On-chip trimming
More informationEE 330 Laboratory 8 Discrete Semiconductor Amplifiers
EE 330 Laboratory 8 Discrete Semiconductor Amplifiers Fall 2017 Contents Objective:... 2 Discussion:... 2 Components Needed:... 2 Part 1 Voltage Controlled Amplifier... 2 Part 2 Common Source Amplifier...
More informationMAINTENANCE MANUAL MHz, 100 WATT POWER AMPLIFIER 19D901841G2
D MAINTENANCE MANUAL 851-870 MHz, 100 WATT POWER AMPLIFIER 19D901841G2 TABLE OF CONTENTS Page DESCRIPTION................................................ Front Cover CIRCUIT ANALYSIS.............................................
More informationPower Devices and Circuits
COURSE ON Power Devices and Circuits Master degree Electronic Curriculum Teacher: Prof. Dept. of Electronics and Telecommunication Eng. University of Napoli Federico II What is the scope of Power Electronics?
More informationNGB8207BN - 20 A, 365 V, N-Channel Ignition IGBT, D 2 PAK
NGB8207BN - 20 A, 365, N-Channel Ignition IGBT, D 2 PAK Pb Description This Logic Level Insulated Gate Bipolar Transistor (IGBT) features monolithic circuitry integrating ESD and Over oltage clamped protection
More informationElectronics, Sensors, and Actuators
Electronics, Sensors, and Actuators 4/14/15 David Flicker BE107 Overview Basic electronics and components Sensors Actuators Electronics 101 Voltage, V, is fundamentally how much energy is gained or lost
More informationOcean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller
Ocean Controls KT-5198 Dual Bidirectional DC Motor Speed Controller Microcontroller Based Controls 2 DC Motors 0-5V Analog, 1-2mS pulse or Serial Inputs for Motor Speed 10KHz, 1.25KHz or 156Hz selectable
More information3. Draw the two transistor model of a SCR and mention its applications. (MAY 2016)
DHANALAKSHMI COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING EE6503 POWER ELECTRONICS UNIT I- POWER SEMI-CONDUCTOR DEVICES PART - A 1. What is a SCR? A silicon-controlled rectifier
More informationBASIC ELECTRONICS CERTIFICATION COMPETENCIES
ANALOG BASICS (EM3) of the Associate C.E.T. BASIC ELECTRONICS CERTIFICATION COMPETENCIES (As suggested from segmenting the Associate CET Competencies into 6 BASIC areas: DC; AC; Analog; Digital; Comprehensive;
More informationLM133/LM333 3-Ampere Adjustable Negative Regulators
LM133/LM333 3-Ampere Adjustable Negative Regulators General Description The LM133/LM333 are adjustable 3-terminal negative voltage regulators capable of supplying in excess of 3.0A over an output voltage
More informationPower Semiconductor Devices
TRADEMARK OF INNOVATION Power Semiconductor Devices Introduction This technical article is dedicated to the review of the following power electronics devices which act as solid-state switches in the circuits.
More informationPreface... Chapter 1. Nonlinear Two-terminal Devices... 1
Preface........................................... xi Chapter 1. Nonlinear Two-terminal Devices.................... 1 1.1. Introduction..................................... 1 1.2. Example of a nonlinear
More informationLM2900 LM3900 LM3301 Quad Amplifiers
LM2900 LM3900 LM3301 Quad Amplifiers General Description The LM2900 series consists of four independent dual input internally compensated amplifiers which were designed specifically to operate off of a
More informationCapacitors, diodes, transistors
Capacitors, diodes, transistors capacitors charging and time response filters (impedance) semi-conductor diodes rectifiers transformers transistors CHM6158C - Lecture 3 1 Capacitors Symbol 2 Capacitors
More informationINTEGRATED CIRCUIT ENGINEERING
INTEGRATED CIRCUIT ENGINEERING Basic Technology By the Stoff of Integraied Circuit Engineering Corporation, Phoenix, Arizona GLEN R. MADLAND ROBERT L. PRITCHARD HOWARD K. DICKEN FRANK H. BOWER ROBERT D.
More informationL MOSFETS, IDENTIFICATION, CURVES. PAGE 1. I. Review of JFET (DRAW symbol for n-channel type, with grounded source)
L.107.4 MOSFETS, IDENTIFICATION, CURVES. PAGE 1 I. Review of JFET (DRAW symbol for n-channel type, with grounded source) 1. "normally on" device A. current from source to drain when V G = 0 no need to
More informationAdvanced Monolithic Systems
Advanced Monolithic Systems FEATURES Three Terminal Adjustable or Fixed oltages* 1.5, 1.8, 2.5, 2.85, 3.3 and 5. Output Current of ma Operates Down to 1 Dropout Line Regulation:.2% Max. Load Regulation:.4%
More informationPreface... xv Acknowledgments... xix. Chapter 1 An Overview of Vacuum Tube Audio Applications... 1
Contents Preface... xv Acknowledgments... xix Chapter 1 An Overview of Vacuum Tube Audio Applications... 1 The Evolution of Analog Audio... 1 Technology Waves... 3 Tube vs. Solid State.................................................
More informationProf. Steven S. Saliterman Introductory Medical Device Prototyping
Introductory Medical Device Prototyping Department of Biomedical Engineering, University of Minnesota http://saliterman.umn.edu/ Solid state power switching: Silicon controlled rectifiers (SCR or Thyristor).
More informationModule 04.(B1) Electronic Fundamentals
1.1a. Semiconductors - Diodes. Module 04.(B1) Electronic Fundamentals Question Number. 1. What gives the colour of an LED?. Option A. The active element. Option B. The plastic it is encased in. Option
More informationM.D. Singh J.G. Joshi MECHATRONICS
M.D. Singh J.G. Joshi MECHATRONICS MECHATRONICS MECHATRONICS M.D. SINGH Formerly Principal Sagar Institute of Technology and Research Bhopal J.G. JOSHI Lecturer Department of Electronics and Telecommunication
More informationUNSIGNED HARDCOPY NOT CONTROLLED. REFERENCES MS90178 Standard 24-Value Series Decade for Electronic Components of 5-, 10-, and 20-Percent Tolerance
Subject: APPROVED BY STATUS PURPOSE AFFECTED FUNCTIONS Electrical Component Identification Manager, Hardware Engineering Maintenance Revision Defines and explains the techniques used for identifying the
More informationREQUIRED SKILLS AND KNOWLEDGE UEENEEE104A. Topic and Description NIDA Lesson CARD #
REQUIRED SKILLS AND KNOWLEDGE UEENEEE104A KS01-EE104A Direct current circuits T1 Topic and Description NIDA Lesson CARD # Basic electrical concepts encompassing: electrotechnology industry static and current
More informationPower Electronics Power semiconductor devices. Dr. Firas Obeidat
Power Electronics Power semiconductor devices Dr. Firas Obeidat 1 Table of contents 1 Introduction 2 Classifications of Power Switches 3 Power Diodes 4 Thyristors (SCRs) 5 The Triac 6 The Gate Turn-Off
More informationAutomotive Full Electric Vehicles (FEVs)
Vishay Intertechnology, Inc. Automotive Full Electric Vehicles (FEVs) www.vishay.com One of the World s Largest Manufacturers of Discrete Semiconductors and Passive Components Full Electric Vehicles (FEVs)
More informationSRM INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED UNIVERSITY)
SRM INSTITUTE OF SCIENCE AND TECHNOLOGY (DEEMED UNIVERSITY) QUESTION BANK I YEAR B.Tech (II Semester) ELECTRONIC DEVICES (COMMON FOR EC102, EE104, IC108, BM106) UNIT-I PART-A 1. What are intrinsic and
More informationLM338T LM338T 5A POSITIVE VARIABLE REG (RC) LM338K LM338K 5A VARIABLE VOLTAGE REGULATOR RC
DATA SHEET Variable voltage regulators Order code Manufacturer code Description 47-3322 LM338T LM338T 5A POSITIVE VARIABLE REG (RC) 47-3324 LM338K LM338K 5A VARIABLE VOLTAGE REGULATOR RC Variable voltage
More information3 Circuit Theory. 3.2 Balanced Gain Stage (BGS) Input to the amplifier is balanced. The shield is isolated
Rev. D CE Series Power Amplifier Service Manual 3 Circuit Theory 3.0 Overview This section of the manual explains the general operation of the CE power amplifier. Topics covered include Front End Operation,
More informationElectrical and Electronic Principles
Unit 19: Unit code Electrical and Electronic Principles M/615/1493 Unit level 4 Credit value 15 Introduction Electrical engineering is mainly concerned with the movement of energy and power in electrical
More informationMetal Detector. Student Lab Guide. Engineering Teaching Laboratory. Lab Partner(s)
Metal Detector Student Lab Guide Engineering Teaching Laboratory Name Date Lab Partner(s) NEW TERMS Electric Circuit: Electric circuits are paths for transmitting electric current, or moving electricity.
More informationElectronic Devices & Circuit and Digital Electronics
QUESTION BANK Electronic Devices & Circuit and Digital Electronics 1. Consider the following four statement i) In the 2 s complement representation, negative numbers are stored in sign magnitude form ii)
More informationABB Automation, Inc. Substation Automation & Protection Division Coral Springs, FL Allentown, PA
ABB Automation, Inc. Substation Automation & Protection Division Coral Springs, FL Allentown, PA Instruction Leaflet 41-348.1H Effective: November 1997 Supersedes I.L. I.L. 41-348.1G, Dated January 1985
More informationHAL , 508, 509, HAL , 523 Hall Effect Sensor Family MICRONAS. Edition Feb. 14, E DS
MICRONAS HAL1...6, 8, 9, HAL16...19, 23 Hall Effect Sensor Family Edition Feb. 14, 21 621-19-4E 621-48-2DS MICRONAS HALxx Contents Page Section Title 3 1. Introduction 3 1.1. Features 3 1.2. Family Overview
More informationMetal Oxide Varistors
Straight Lead Dimensions Table Series 5D 7D 10D 14D 20D D max 7 9.5 14 17.5 24 d* 0.6 0.6 0.8 0.8 1 W** 5 5 7.5 7.5 10 H max 12.5 14.5 20 22.5 29.5 H1 max 10 12 17 20.5 28 T max 4.9 4.9 8.5 8.5 9 P max
More informationCurrent loop output (4...20mA) for a volt pressure transmitter
Application note AN11 Application: Adapting a sensor with an (Uout =.5 4.5V) output and a 5V supply to suit a 4 2mA industrial current interface (3 wire-version) powered by 24V. The following article describes*
More informationElectronic Metronome. Using a 555 Timer
Electronic Metronome Using a 555 Timer LM 555 Timer Chip Used in a wide variety of circuits to generate square wave and triangular shaped single and periodic pulses. High efficiency LED and fluorescence
More informationBASIC ELECTRONICS/ ELECTRONICS
BASIC ELECTRONICS/ ELECTRONICS PREAMBLE The syllabus is intended to equip candidates with broad understanding of the technology of manufacturing, maintenance and repair of domestic and industrial equipment.
More information