SUPER LED F4.7 60W LED Fresnel SPOTLIGHT 100/240V 50/60 Hz (white light, either Tungsten or Daylight balanced Correlated Color Temperature)

Transcription

1 SUPER LED F4.7 60W LED Fresne SPOTLIGHT 100/240V 50/60 Hz (whte ght, ether Tungsten or Dyght nced Correted Coor Temperture) INSTRUCTION MANUAL Mnu Operted Poe Operted MANUFACTURER REPRESENTATIVE ILT Ity S.r.. V Cnceer # 10, Ano Lze (Rome- Ity). Te. +39/06/ Fx. +39/06/ U.R.L.: E-m: desst@desst.t 1. INTRODUCTION Congrtutons on your purchse of SUPER LED F4.7 ghtng fxture wth ether Tungsten or Dyght Bnced CCT LED. Our commtment to Tot Customer Stsfcton nd our consodted experence nd edershp n desgn nnovton nd mnufcturng of ghtng products for the professon Entertnment Industry mens you cn depend upon the uty of ths product. The SUPER LED F4.7 s compct, hghy effcent Fresne ens spotght usng LED ARRAY comned wth the DE SISTI Ptented optc system to optmze the photometrc performnces of LED ARRAYS when utzed n comnton wth ether Fresnes or Pno Convex enses. The Lghtng Fxture s DMX Controed nd ncudes numer of prmeters tht cn e set ocy, t s eupped wth unvers votge power suppy for AC feed nd t s ve wth ether Tungsten or Dyght Bnced CCT. It utzes Stndrd ccessores from the DE SISTI rnge of euvent Fresne Lens sze, such s Brndoor, Coour Frme, Cones, scrms. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 1.

2 2. YOKE AND ACCESSORIES ASSEMBLY (POLE OPERATED) (MANUAL OPERATED) 3. POWER AND DMX DAISY CHAIN The SUPER LED F4.7 permts oth POWER nd DMX DAISY CHAIN. In fct ech Fxture s respectvey eupped wth: For DMX: 1 XLR5 pn Pne Mount Me (DMX IN) 1 XLR5 pn Pne Mount Feme (DMX OUT) For Mns Suppy 1 20A Powercon NAC3MPA BLUE (POWER IN) 1 20A Powercon NAC3MPB WHITE (POWER OUT) It s recommended to Dsy Chn Mx of 12 fxtures, even f the mttons mposed y DMX Stndrds re for n hgher.ty of unts nd even f the Powercon Connectons re rted for 20A mx. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 2.

3 4. SAFETY INSTRUCTIONS Professon use: Ths umnre hs een desgned for professon use nd must e operted y ufed personne ony. Not for resdent use. Groundng: WARNING: THIS LUMINAIRE MUST BE GROUNDED WARNING: Dsconnect Power CORDS efore ny mntennce work or openng the FUSE HOLDER. Rsk of serous njury. Eectrc connectons: IMPORTANT The cores n ths mns ed re coored n ccordnce wth the foowng code: Europe Amerc Ground Green & yeow Green or green & yeow Neutr Bue Whte Lve Brown Bck In cse the coors of the cores do not correspond to the coors of the connecton ponts on your pug, pese proceed s foows: the green or green nd yeow core must e connected to the connecton pont mrked wth the etter E or wth the symo or coored n green or n green - yeow; the ue (or whte) core must e connected to the connecton pont mrked wth the etter N or coored n ck; the rown (or ck) core must e connected to the connecton pont mrked wth the etter L or coored n red. Workng condtons Workng Poston Lghtng fxture: Mx. Ttng 90 from horzont Ament Temperture, t t the pce of nstton nd Storge Humdty t the pce of nstton nd Storge Mnmum dstnces from nfmme surfces Mnmum 10 C, mxmum +40 C 25-80% (not condensng) Top Bck Sdes Front 0,1 m. 0,1 m. 0,1 m. 0,5 m. The umnre shoud never e OPERATED cose to nfmme mters. The ones ndcted n the ove te re the mnmum dstnces recommended. Other reurements for sfe use re: A. Do not cover the pertures of the umnre housng. They re essent for correct ventton. B. Use ony orgn ccessores nd spres from De Sst Lghtng. C. Before hngng the umnre ensure tht the suspenson pont (or the stnd) s propery rted to ccept the umnre weght. D. In cse of poe operted use, ft ony P.O. strrup from De Sst Lghtng. E. A sute secondry sfety suspenson devce (sfety ce, chn or euvent) must e ftted etween the suspenson pont nd the eyeet t the front of the ody. WARNING : DO NOT MOUNT THE LUMINAIRE ON A NORMALLY FLAMMABLE SURFACE. 5. INSTALLATION INSTRUCTIONS The foowng procedure shoud e dopted: Before connectng the umnre to the eectrc mns ensure tht: A. Erth ne s present on the power socket. B. The mns votge s wthn the rted rnge of the umnre (see technc dt on the rtng e) C. The front sfety shed s present nd n good condton. It conssts of Fresne ens mde y oroscte un-toughened gss, wth Dmeter = 120 mm, thckness = 4 mm type ( 3 mn ). Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 3.

4 WARNINGS : Do not operte the product f the ment temperture exceeds 40 C Provde mnmum cernce of 0,1m (4 n.) round fns nd r vents. SHIELDS, LENSES SAFETY OR DICHROIC GLASSES SHALL BE CHANGED IF THEY HAVE BECOME VISIBLY DAMAGED TO SUCH AN EXTENT THAT THEIR EFFECTIVENESS IS IMPAIRED, FOR EXAMPLE BY CRACKS OR DEEP SCRATCHES. THE LUMINAIRE SHALL ONLY BE USED COMPLETE WITH ITS PROTECTIVE SHIELD D. Appyng power: Never connect to dmmer power. Inst power pug on the power ce usng the foowng pn ssgment: 1 : Neutr 2 : Lve Green/Yeow : Ground - Ths fxture must e connected to ground. Mke sure the oc power votge s wthn the rnge specfed. If so; connect the power ce nd turn the power on. E. Stnd Aone operton: Usng the nvgton uttons nd dspy redout ( refer to the Loc Menu chpter ) nvgte to Mnu nd set the desred ntensty (for ddton opertons see Loc Menu chpter) F. DMX operton: Connect DMX ce Nvgte to Address mode (Addr) nd set the desred ddress, (refer to the Loc Menu chpter). Connect to DMX controer (refer to the Chnne Settng n the Loc Menu chpter) nd Use t. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 4.

5 6. LOCAL MENU PGM PORT For Frmwre Upgrde FUNCTION 1 Scrong UP / Increses vue functon key ENTER Seect / Confrm FUNCTION 2 Scrong DOWN / Decreses vue functon key Dspy When the push utton re not used for more thn 15 seconds the dspy w go OFF. It w go ON gn nytme push utton s ctvted. DMX Presence Shows the presence of DMX (LED t = DMX present) DEFAULT SETTINGS ARE INDICATED IN BOLD LETTERS ON THE FOLLOWING TABLE: The foowng re the BASIC FUNCTIONS nd COMMANDS tht re provded on the LOCAL MENU of the LED FRESNEL. The unt s provded wth USER MENU ccesse nstnty on the product. The unt hs so SERVICE MENU tht s ony ccesse through PASSWORD nd s reserved for QUALIFIED nd TRAINED PERSONNEL: 1st MENU Dspyed (scrong wth the nd the uttons) 2nd MENU Dspyed (fter pressng the X tht stnds for ENTER) Expnton of Ech MENU FUNCTION DMX ADDRESS Ths Functon s to SET the DMX ddress from 1 to 512 (Product s devered wth defut settngof the DMX ddress t 1) Once the C001 s dspyed, ct on the utton to ncrese the ddress to the desred vue. Temporry push w ncrement the vue y 1, f the utton s kept pushed the ncrement on numers s gettng fst. Once the desred Address numer s ccompshed press X ( ENTER ) to mke t ctve LOCAL DIMMING CONTROL Ths Functon s to LOCALLY DIM the LED INTENSITY from 0 to 100% (Product s devered wth defut settng of the DIMMER t 0). The ntensty goes n ncrements of 1/100% so the dspy w show 000% wth the dmmer t 0% nd FULL wth the dmmer t 100%. Temporry push w ncrement the vue y 1/100, f the utton s kept pushed the ncrement on numers s gettng fst. Once the desred Lghtng Leve s ccompshed nd t s wnted to eve tht eve nd go to other functons of the MENU, press ENTER. LOCAL OR REMOTE CONTROL SETTINGS The LED Fresne hs the fcty to ock the LOCAL DIMMING SETTING nd mntn t when the POWER s turned frst OFF nd thn ON gn. Ths ows for the LIGHT to e TUNED nd FOCUSED ocy nd ts dmmng eve cn e ocked, so tht for nstnce system ghtng SET cn e operted y remote swtch or smpe rkers y TURNING POWER ON. The reevnt menu to ccess ths functon s CTRL, to enter n ths menu press X ( ENTER ), t s thn posse to seect ether DMX or AUTO y ctng on the or utton nd thn press X ( ENTER ) gn. The mchne s set to DMX s defut. In DMX mode: the Fxture ccepts DMX contro.f n ths mode the oc DIMMING CONTROL s SET to eve the Lght ehvour w foow the HTP (Hghest Tkes Precedence) modty, n other words t w keep the oc DIMMING settng unt the DMX eve of the specfc chnne w e hgher, from tht eve onwrds the DMX eve w tke precedence. In ths condton f the DMX connecton s removed, the ght w keep the st eve.unt power s ON. It w reset nd Strt t 0fter Power OFF nd ON gn. In AUTO mode: the ght w gnore ny DMX contro. In ths mode ny oc dmmng settng w e mntned nd w e utomtcy reced fter power off, when turnng the power on gn. TEMPERATURE Ths functon Dspys n re tme the LED ARRAY Cse temperture n C. When pressng Enter gn you ext from the temperture dspy. The stedy stte TEMPERATURE of the ARRAY reches pprox. 55 C fter mny hours of contnuous operton wth n ment temperture of C. The Therm Hndng of the LED s Automtcy hnded y the oc eectroncs nd the LED w operte unt the ARRAY temperture reches 80 C, tht nywy s st wy wthn the prescred mxmum nomn prescred y the ARRAY mnufcturer tht s 105 C. In cse the ARRAY temperture reches 80 C the unt w utomtcy turn off. Even n extreme Ament temperture condtons the LED ARRAY sh never rech the 80 C mt. The ove protecton threshod s there to protect the LED ARRAY from stressed workng condtons n cse some other fures or specy crtc workng condtons re cusng n over-temperture. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 5.

6 1st MENU Dspyed (scrong wth the nd the uttons) 2nd MENU Dspyed (fter pressng the X tht stnds for ENTER) Expnton of Ech MENU FUNCTION CHANNEL SETTING (RESOLUTION & FUNCTION) Ths Functon s to set the DIMMING RESOLUTION ether t 8 ts or t 16 ts. Once CHAN s dspyed, ct on the or uttons to scro through the foowng choses: 8D: 8 ts resouton (the dspy w show 8D nd ths s the defut settng). The Fxture utses 1 DMX Crcut for the Lght Dmmng, whch s the BASE CIRCUIT set n the ADDRESS. 8DS: NOT ACTIVE (for future use): The foreseen functon for ths settng s: 8 ts resouton nd STROBE (the dspy w show 8DS). The Fxture w utse 2 DMX Crcuts, the BASE CIRCUIT set n the ADDRESS w e the LIGHT DIMMING nd the second crcut (BASE +1) w e the STROBE 16D: 16 ts resouton (the dspy w show 16D). The Fxture utses 2 DMX Crcuts, the BASE CIRCUIT set n the ADDRESS s the Corse Dmmng, the second Crcut (BASE +1) s the Fne Dmmng. 16DS: NOT ACTIVE (for future use): The foreseen functon for ths settng s: 16 ts resouton nd STROBE (the dspy w show 16DS). The Fxture w utse 3 DMX Crcuts, the BASE CIRCUIT set n the ADDRESS w e the Corse Dmmng, the second Crcut (BASE + 1) w e the Fne Dmmng. the thrd CIRCUIT (BASE + 2) w e the STROBE Of course the 16 ts functon s usefu f the correspondng crcuts on the DMX LIGHTING BOARD re so set t 16 ts. WARNING: f the LED FRESNEL s set t 16 ts, ut more unts re hvng consecutve untry ddress (for nstnce frst fxture set t Address 1, second fxture set t Address 2 nd so forth, the DMX Chnne controng the Corse Dmmng of the second unt, w so contro the fne dmmng of the frst unt. In ths cse t s recommended tht fxtures re set to 8 ts resouton). DMX LEVEL It Shows the DMX Input eve on percentge (0-99% nd FULL) receved effectvey from the Fxture. Press ENTER to ext ths MENU. 7. CHARACTERISTICS AND PERFORMANCE DATA DESCRIPTION VALUE DESCRIPTION VALUE LED Power 60 W Protecton Type IP 22 Power Consumpton 230 V 120 V Mx Housng surfce temperture 70 C DMX Dt nk USITT DMX512-A DMX Chnnes: Protecton Css Ths product uses 5-pn XLR for DMX nput nd output. Use sheded dt ces. Do not overod the dsy chn. Up to mxmum of 32 devces cn e used on snge DMX chn. 1 t 8t: Dmmer 2 t 16t: Dmmer Css 1 ground connecton reured Specfctons suject to chnge wthout notce. Weght of Fxture Weght of rndoor M.O. 3,5 kg. 4 ef 8 ef 0,3 kg. 0,4 kg. Weght of coor frme 0,2 kg. Sze of scrms & coor frme Sze of Brndoor rng Accessores Dmeter 129 mm Rng Dmeter 133 mm Lens dmeter 120 mm. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 6.

7 8. DIMENSIONS Dmensons: Bck=mm. Red=nches Dmensons: Bck=mm. Red=nches 9. PERIODIC INSPECTION & MAINTENANCE Ths product reures very tte routne mntennce, f ny, ut hs spec cenng nstructons: Dsconnect fxture from power nd ow t to coo for 10 mn. 1. Vcuum or genty ow wy ny dust from fn des nd grs 2. Very genty cen the LED wth Isopropy coho. 3. Cen the enses wth soft dmp coth. 4. Check the condton of the sfety shed (see chpter: Instton Instructons) efore every use. 5. Check Power suppy ce nd DMX contro ce proper condtons 10. SAFETY STANDARDS Europe: The product conforms the Appce Europen Drectves & Stndrds Low Votge Drectve: 73/23/EEC (s mended y 93/68/EEC) EMC Drectve: 89/336/EEC (s mended y 92/31/EEC & y 93/68/EEC) Europen Stndrds:: EN , EN , EN 55015, EN Dsposng of ths product: Hep preserve the envronment! Ensure tht ths product s recyced t the end of ts fe. Ths product s n compnce wth the RoHS nd WEEE drectves. Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 7.

8 Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 8. n p u t v s z r h e g n h m c f s e B A SHEET 2 SEE SEE SHEET 2 o

9 A A B SEE SHEET 2 Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 9.

10 Ths Mnu s ppce to the Revsed Apr 2nd 2015 De Sst Super LED 4.7 Pg 10. n p u t v s z r h e g n h m c f s e D C SHEET 3 SEE SEE SHEET 3 o