PMM-BA PMM-BA AC 100 V/115 V Full-step/half-step (500 x 1 divisions) (500 x 2 divisions)
|
|
- Ferdinand Riley
- 5 years ago
- Views:
Transcription
1 Pulse I/ (AC power input) The -Phase Stepping Driver - PMM-BA-- AC V/ V ull-step/half-step ( x divisions) ( x divisions) Applicable motors ø ø Characteristics High-speed type These drivers are high-speed types of PMM-BA- -. Stepping motors can be used even in the high-speed range. lexible The drivers can drive various stepping motors of small to large capacities without adjustment for wide range uses. Small size and high torque Dedicated ICs are mounted to realize the small size and high torque as a result of parts consolidation and high reliability. Two types interface Two lineup types are: Terminal block type :- Connector type :PMM-BA-- Built-in function Low-vibration control Our original control system employment enables a smooth and low-vibration operation. Pulse input system selection function Either single or double input system can be selected by using dipswitches. Operation current switchover function Stepping motor operation current ranging from the rated one to % can be set by using the rotary switch.
2 ø ø PM driver specifications Item Input source Source current Operating ambient temperature - Single phaseac/v+,-% /Hz A to + C PMM-BA-- PMAPASA Basic specifications Environment Conservation temperature Operating ambient humidity Conservation humidity Vibration resistance Impact resistance - to + C to % RH (no condensation) to % RH (no condensation) Tested under the following conditions: requency range: to Hz,. G along the X, Y, and Z axes for hours No abnormality for the NDS-C- Standard, Section.., Division "C". PMAPASB unction Withstand voltage Insulation resistance Weight Protection function Selection function LED indicator Command pulse input signal No abnormality against an AC V application between the power input terminal and the cabinet for one minute. Minimum MΩ when applying the DC V Megger between the power input terminal and the cabinet..kg Against PM driver overheat Automatic current reduction, excitation mode, pulse input system, operation current, and low vibration Power supply monitor, phase origin monitor, pulse monitor, and alarm monitor. Photocoupler input system, input resistance Ω Input signal voltage: "H" level:. to. V, "L" level: to. V Maximum input frequency: kpulses/s PMM-MA- PMM-MA- I/O signals Power down input signal Phase origin monitor output signal Photocoupler input system, input resistance Ω Input signal voltage: "H" level:. to. V, "L" level: to. V Open collector output by photocoupler Output signal standard Vceo: Maximum V, Ic: Maximum ma PMM-BA- - Alarm output signal Standard combined stepping motor Relay contact output (normal open) Contact capacity: Maximum A at DC V or maximum. A at AC V Stepping motor Stepping motor model number Holding torque Rotor inertia Weight Page dimensions Single-axis shaft Dual-axis shaft [N m] [ -kg m] [kg] H- mm H-... Page H- H-... H- H-... mm H- H-... Page H- H-... ømm H- H-... Page H- H-... H- H-... ømm H- H-... Page H- H-... H- H-... ømm H- H-.. Page H- H-. or the general specifications and dimensions of each stepping motor, refer to the reference pages. PMDPACP PMDPAAP - PMDPBSP PMDPCSP PMM-MD- - PMM-BD- -
3 CN Pulse I/ (AC power input) Operation, connection, and function Each section name of the PM driverconform to CE Marking - G AC MOTOR AL CCW CW ~ ~ E O D C B A POW M PM AL EX R SL PL LL VE TU RUN STP VA BLACK RED ORANGE YELLOW BLUE ~ AC/V ~ Internal power establishment (POW) Indicates that the internal power is established. Phase origin monitor (M) Indicates that the excitation phase is at the origin (in the state when the power is turned ). Input pulse monitor (PM) Indicates that the input pulse is applied. Alarm monitor(al) Turns when the internal alarm circuit operates. unction selection dipswitch unctions can be selected according (EX,/R,SL,,PL,LL,VE,TU) to the specification. Operation current selection switch (RUN) Stepping motor current value during operation can be selected. Selection switch for low vibration (VA) Low-vibration operation and the stepping motor heat generation reduction can be performed. Terminal block (TB) I/O signals, the single-phase AC power source, and the stepping motor power cable are connected. = PMM-BA-- B B CN CN A A E PMM-BA- O D C B A POWER M PM AL EX /R SL PL LL VE TU RUN STP VA Internal power establishment (POW) Indicates that the internal power is established. Phase origin monitor (M) Indicates that the excitation phase is at the origin (in the state when the power is turned ). Input pulse monitor (PM) Indicates that the input pulse is applied. Alarm monitor(al) Turns when the internal alarm circuit operates. unction selection dipswitch unctions can be selected according (EX,/R,SL,,PL,LL,VE,TU) to the specification. Operation current selection switch (RUN) Stepping motor current value during operation can be selected. Selection switch for low vibration (VA) Low-vibration operation and the stepping motor heat generation reduction can be performed. Connectors for I/O signal I/O signals are connected. Stepping output connector (CN) The stepping motor power cable is connected. Power source input connector (CN) Single-phase AC power source is connected.
4 ø ø Operation, connection, and function External wiring diagram - Note ) CW pulse input Note ) CCW pulse input Power down input Note ) TB CW CCW PMAPASA PMAPASB Alarm output ACV / V +% -% ~ ~ G AL BLACK RED ORANGE YELLOW BLUE Note ) Use shielded twisted-pair cables. Note ) Either "double input system (CW and CCW)" or "single input system (CK and U/D)" can be selected by using the function selection switch /R Note ) Refer to the following table when connecting the H type stepping motor: Product Terminal block silk screen print/stepping motor connector pin number PM driver (TB) BLACK RED ORANGE YELLOW BLUE Stepping motor connector Note ) Black Red Orange M Yellow Blue Note ) Note )Ground the stepping motor flange section and the stepping motor fastening screw by fixing them together. Use a single point grounding. PMM-MA- - PMM-MA- PMM-BA- - PMM-BA-- Note ) CW pulse input Note ) CCW pulse input Power down input Phase origin monitor output Alarm output Note ) ACV / V +% -% CN A B A B A B A B A B CN Note ) Use shielded twisted-pair cables. Note ) Either "double input system (CW and CCW)" or "single input system (CK and U/D)" can be selected by using the function selection switch /R Note ) Refer to the following table when connecting the H type stepping motor: Product Connector pin number PM driver (CN) Stepping motor connector CN Black Red Orange Yellow Blue Note ) M Note ) Note ) Ground the stepping motor flange section and the stepping motor fastening screw by fixing them together. Use a single point grounding. PMDPBSP PMDPCSP PMM-MD- - PMM-BD- - PMDPACP PMDPAAP
5 Pulse I/ (AC power input) Operation, connection, and function unction selection dipswitch EX /R SL PL LEL O O step Double input system CW and CCW pulses input) Automatic current reduction operation Power off O (Do not turn it.) --- EX (excitation system selection) Excitation mode is selected. EX O Energization system step (. /pulse) ull step (. /pulse) /R (pulse input system selection) A pulse input system is selected. /R O SL (automatic current reduction selection) Automatic current reduction function is selected. SL Pulse input system Single input system (CK and U/D) Double input system (CW and CCW) Auto current down Operates. and PL (power down and power low selection) The stepping motor windings current value at the power down signal input is selected. PL Stepping motor current O OA (power O) The current value (power low) O using the stopping current adjustment control (STP) LEL selection (Note) This switch is not used. Do not turn it. VE and TU selection (Note) This switch is not used. Do not turn it O. VE O Does not operate. (Do not turn it O.) TU Settings at the shipment are shown above. Turn O the PM driver power before changing switch settings to change the function selection dipswitch settings. Operation current selection switch (RUN) --- The operation current value of stepping motor can be selected. Scale Stepping motor current (A total) "" is set at the shipment.. A/phase is set at scale. Scale A B C D E Stepping motor current (A total) Low-vibration selection switch (VA) --- The vibration and the stepping motor heat generation can be reduced. Scale unction "" is set at the shipment. Settings from to are valid. Standard Sometimes the high-speed torque may decrease. Vibration reduction Motor heat generation reduction
6 ø ø Operation, connection, and function I/O signal function --- Signal name Silk print/pin Number (Abbreviation) Terminal block type Connector type unction CW pulse input CW+ A When using double input system (CW) CW- B Drive pulse for the CW direction rotation is input. Pulse column input CK+ A When using single input system (CK) CK- B Drive pulse train for the stepping motor rotation is input. CCW pulse input CCW+ A When using double input system (CCW) CCW- B Drive pulse for the CCW direction rotation is input. The rotation direction signal of stepping motor is input for the single input system. Rotation direction input U/D+ A Internal photocoupler CW direction (U/D) U/D- B Internal photocoupler O CCW direction Inputting the signal cuts O the current flowing through the stepping motor (turns O the power). Power down input + A (The power down input can be changed to the power low function by selecting dipswitches.) () - B input signal (internal photocoupler ) function enabled input signal O (internal photocoupler O) function disabled Phase origin monitor output A It is turned when the excitation phase is at the origin (in the state when the power is turned ) (M) It is turned once per pulses when setting to -division (full step). B It is turned once per pulses when setting to -division (half step). Alarm output AL A The signal is externally output when one of several alarm circuits operates in the PM driver. (AL) AL B At this time, the stepping motor is in the unexcited state. The terminal block type indicates "-" and the connector type indicates "PMM-BA--" in the table. The CW direction of stepping motor means the clockwise direction rotation as viewed from the output shaft side (flange side). The CCW direction means the counterclockwise direction rotation as viewed from the output shaft side (flange side). PMAPASA PMAPASB PMM-MA- PMM-MA- PMM-BA- - - Connectors to be used PMM-BA-- PM driver side Applicable connector model number Manufacturer Used for Model number I/O signals (CN) HIBD-PA-.DS Applicable socket :HIBD-DA-.R Hirose Electric Co., Ltd. Stepping motor Applicable housing:- -A (CN) Applicable contact:pbtl Molex Japan AC power source Applicable housing:- -A (CN) Applicable contact:pbtl Molex Japan The applicable connectors should be either prepared by the user or ordered from the optional connector set or connector cables (refer to Option in page ). - using the terminal block interface does not require connectors. PMDPACP PMDPAAP PMDPBSP PMDPCSP PMM-MD- - PMM-BD- -
7 Pulse I/ (AC power input) Operation, connection, and function Input circuit configuration (CW and CCW) Input signal +V Approx. ma Ω Pulse duty is % or less. When the peak value of the input signal is V, the external limit resistance R is Ω. If the peak value exceeds V, set the input current to approx. ma using the external limit resistance R. R PM driver Input signal specifications µs or more.~.v % % Rotation operation % ~.V µs or less µs or less Timing of the command pulse Double input system (CW and CCW) CW CCW The internal photocoupler turns at, and the internal circuit (stepping motor) operates at the leading edge of the photocoupler "". When applying the pulse to CW, set the internal photocoupler on the CCW side to "O". When applying the pulse to CCW, set the internal photocoupler on the CW side to "O". Within the self-start frequency Single input system (CK and U/D) CK µs or more The internal photocoupler turns at, and the internal circuit (stepping motor) operates at the leading edge of the CK photocoupler "". Before switching the U/D input signals, turn O the internal photocoupler on the CK side. U/D Input circuit configuration () +V Ω When the peak value of the input signal is V, the external limit resistance R is Ω. If the peak value exceeds V, set the input current to approx. ma using the external limit resistance R. Input signal Approx. ma R PM driver
8 ø ø Operation, connection, and function Output circuit configuration (M and AL) PMAPASA Relay Alarm output signal Alarm output signal Phase origin monitor output signal max ma max V Contact type: Relay contact output (normal open) Contact capacity: Maximum A at DC V or maximum. A at AC V Phase origin monitor output signal Contact type: or open collector output by photocoupler Contact capacity: Maximum ma at DC V PMAPASB PM Driver Phase origin monitor output signal is compatible with PMM-BA--. (There is no phase origin monitor output signal for -.) I/O connectors B and B of PMM-BA-- are common inside. PMM-MA- Timing of the M output (at full step) CW pulse The internal photocoupler turns "" at. PMM-MA- CCW pulse M output PMM-BA- - State Indication (LED) Indication Color Explanation POW turns on. Green Internal power has been established. Excitation phase is at the origin (the power is turned on). M turns on. Green When -division is specified (full step), turns on once in pulses. When -division is specified (half step), turns on once in pulses. PM turns on. Green Command pulse is input. Turns on for Approx. ms for every one pulse input. - PMDPBSP Timing of M illumination (at full step) PMDPCSP CW pulse CCW pulse The internal photocoupler turns "" at and M illuminates. PMM-MD- - M Alarm Indication (LED) PMM-BD- - Indication Color Explanation AL turns on. Red The overheat protection alarm circuit of the internal device operates. The circuit operates when both the internal temperature of the PM driver and the ambient temperature become C or more. Each alarm circuit operation turns on the alarm LED and cuts off the stepping motor current to result in the unexcited state.at the same time, the alarm output circuit photocoup ler of I/O signal connector (CN) turns and the signal is output externally.the alarm automatically stops to turn the stepping motor current when the internal semiconductor temperature becomes C or less.turn O the main power and try to radiate the generated heat by the forcedair-cooling of PM driver cabinet and so on before the automa tic recovery from the alarm state when an alarm occurs. PMDPACP PMDPAAP
9 CW AL G ~ B CN B CN CN A A E O D E O C D B C A B A POW M PM AL EX R SL PL LL VE TU RUN STP VA POWER M PM AL EX /R SL PL LL VE TU RUN STP VA BLACK RED ORANGE YELLOW BLUE AC/V max mm Pulse I/ (AC power input) Dimensions (Unit: mm) - or less or less AC MOTOR CCW ~ ~ ~ MODEL - SER NO. MADE IN JAPAN D-I--B -M. (itting hole) PMM-BA-- or less or less PMM-BA- MODEL PMM-BA-- SER NO. MADE IN JAPAN D-I--B -M. (itting hole) Installation direction and position Install the PM driver vertically. As shown in the figure, fix the PM driver by using the M screws through fitting holes on the bottom surface of PM driver (no fitting metals are necessary). Use such screws that enter inside the drive equipment for maximum mm.
10 ø ø Pulse rate-torque characteristics/pulse rate-source current characteristics H- :V.. H- :V.. PMAPASA Torque(kgf cm).... PMAPASB.. ull Rotating speed(min-) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step.. ull Rotating speed(min-) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step PMM-MA- PMM-MA- H- :V. H- :V. PMM-BA- - Torque(kgf cm)..... ull Rotating speed(min - ) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step H- :V..... ull Rotating speed(min - ) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step H- :V - PMDPBSP PMDPCSP PMM-MD PMM-BD ull Rotating speed(min-) Torque(kgf cm).... ull Rotating speed(min-) PMDPACP PMDPAAP Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step
11 Pulse I/ (AC power input) Pulse rate-torque characteristics/pulse rate-source current characteristics H- :V H- :V ull Rotating speed(min-). ull Rotating speed(min-) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step H- :V H- :V.... Torque(kgf cm)..... ull Rotating speed(min - ). ull Rotating speed(min - ) Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step Source voltage:acv Winding current:. A/phase Getaway torque(jl=. -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step H- :V H- :V Torque(kgf cm)..... ull Rotating speed(min-). ull Rotating speed(min-) Source voltage:acv Winding current:. A/phase Getaway torque(jl= -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step Source voltage:acv Winding current:. A/phase Getaway torque(jl= -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step
12 ø ø Pulse rate-torque characteristics/pulse rate-source current characteristics H- :V.... PMAPASA PMAPASB.. ull Rotating speed(min-) Source voltage:acv Winding current:. A/phase Getaway torque(jl= -kg m using the rubber coupling) Source current(tl=max) Source current(tl=) fs:maximum self-start frequency when not loaded ull step step PMM-MA- PMDPACP PMDPAAP PMM-MA- PMM-BD- - PMM-MD- - PMDPCSP PMDPBSP - PMM-BA- -
13 Pulse I/ (AC power input) Option PMM-BA-- Connector set Model number Used for Set content Combination stepping motor model number I/O signal (CN) Applicable socket:hiba-da-.r PM-AP- Power source (CN) Stepping motor (CN) Applicable housing:- Applicable contact:pbtl Applicable housing:- Applicable contact:pbtl Applicable housing:vhr-n Applicable contact:svh-t-pl. Type H PM-AP- I/O signal (CN) Power source (CN) Stepping motor (CN) Applicable socket:hiba-da-.r Applicable housing:- Applicable contact:pbtl Applicable housing:- Applicable contact:pbtl Type H H H H Connector cable Model number Application The connector cable is a -meter cable assembled with the connector. PM-CS- Connector cable for I/O signals (CN) PM-CM- Connector cable for stepping motors (CN) PM-CP- Connector cable for AC power source (CN) are spaces to be filled by the serial number or (refer to Supplement table ). Applicable connector cable CN CN CN Cable Cable or Cable - Terminal block cover Model number PM-AP- Quantity One Stepping motor cable model number (Supplement table ) Serial No. Stepping motor model number H- H- H- H- H- H- H- H- H- H- H- H- H-
14 ø ø Option Cable (power source cable CN) Driver side Pin number Color White Black Green m ULAWG V, C Cable model number PM-CP- Length m PMAPASA PMM-MA- PMAPASB Cable (I/O signal cable CN) Driver side Pin number Color Brown Red Orange Yellow Green Blue Purple Gray White Black AWM E- VW- V, C m Cable (stepping motor extension cable CN) Cable model number PM-CS- Length m PMM-MA- PMM-BA- - - Driver side Pin number Color Black Red Orange Yellow Blue m ULAWG Cable model number Length V, C PM-CM- m Applicable stepping motor H- H- H- H- H- H- H- H- H- H- PMDPBSP PMDPCSP Cable (stepping motor extension cable CN) PMM-MD- - Driver side Pin number Color Black Red Orange Yellow Blue m ULAWG V, C Stepping motor side Pin number Color Black Red Orange Yellow Blue Cable model number PM-CM- Applicable stepping motor H- H- H- Length m PMM-BD- - PMDPACP PMDPAAP
:PMM-BA ø 60 ø 86 ø 106
Pulse I/ (AC power input) The -Phase Stepping Driver PMM-BA-- PMM-BA-- ACV/V -step/half-step ( x division) ( x divisions) Applicable motor ø ø ø Characteristics lexible These drivers can drive various
More informationPMM-MA AC 100 V to 230 V Micro-step (500 x 1 to 250 divisions)
Pulse I/F (C power input) The -Phase tepping Driver PMM-M-- C V to V Micro-step ( x to divisions) pplicable motors ø ø ø Characteristics Conformity to CE Marking This driver conforms to CE Marking. ide-range
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More information3-PHASE STEPPING SYSTEMS. Ver.1. English
-PHASE STEPPING SYSTEMS Ver. English -phase STEPPING SYSTEMS F series DRIVER H series MOTOR Ranges of stepping systems Set model Large Vibration Small -phase STEPPING SYSTEMS -phase stepping system -phase
More informationDriver specifications Motor Specifications P.57
specifications Motor Specifications P. General Specifications Unipolar Bipolar Model number USDP BSDP Input source DC V/ V Source current A Basic specifications Environment Protection class Operation environment
More informationRoHS Directive-Compliant Compact Linear Actuators DRL Series. Features
Motorized ctuators RoHS Directive-Compliant Compact Linear ctuators DRL Series In the compact linear actuator DRL Series, the drive mechanism adopts a -phase stepping motor with ball screw. This series
More informationIP65 Splash and Dust Proof Stepping Motors
IP5 Splash and Dust Proof Stepping Motors CE/UL Model Features These IP5 rated motors* have superior water and dust resistance, and can be safely utilized in harsh or wet environments such as in food processing
More informationCompact Actuator DRL Series
Introduction Precision Rack & Pinion Linear Linear Actuators Heads DRL LH Accessories Before Using a Linear Motion System Compact Actuator DRL Series Additional Information Technical Reference F-1 General
More information5-Phase Stepping Motor and Microstep Driver Package
ORIENTAL MOTOR GENERAL CATALOGUE Motor and Microstep Driver Package RFK Features B-154 Specifications B-157 Speed - Torque Characteristics B-158 Dimensions B-159 List of motor and Driver Combinations B-16
More informationORIENTAL MOTOR CATALOG
ORIENTAL MOTOR CATALOG -PHASE HIGH-TORQUE STEPPING MOTOR AND DRIVER PACKAGE UPK W Series Features B- Product Line B- Standard Type, High-Speed Type B-8 Geared Type B-8 List of and Combinations B- Wiring
More information5-Phase Stepping Motor and Driver Package CSK Series
Stepping s -Phase Stepping and Package CSK Series Additional Information Technical Reference F- General Information G- Introduction AS AS PLUS ASC RK CFK CSK PMC UMK CSK PKPV PK UIG EMP EMP SG8J SMK Accessories
More information2-Phase Stepping Motor Driver with Built-in Indexer UI2120G
-Phase Stepping Motor Driver with Built-in Indexer UI10G Additional Information Technical Reference F-1 General Information G-1 Introduction AS AS PLUS ASC RK CFK CSK PMC UMK CSK PK/PV PK UI10G EMP01 EMP0
More information56 mm sq. (2.20 inch sq.)
56 mm sq. (. inch sq.) 1.8 /step RoHS Unipolar winding, Lead wire type Bipolar winding, Lead wire type p. 7 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
More information5-Phase Stepping Motor and Driver Package CSK Series
Stepping s -Phase Stepping and Package CSK Series Additional Information Technical Reference F- General Information G- Introduction AS AS PLUS ASC RK CFK CSK PMC UMK CSK PKPV PK UIG EMP EMP SG83J SMK Accessories
More informationUMK M A A. RoHS-Compliant. 2-Phase Stepping Motor and Driver Package. Features. Product Number Code. Product Line
RoHS-Compliant Stepping Motor and Package UMK Series Additional Information Technical reference Page F- The UMK Series is a -phase stepping motor (resolution: per rotation) with easy-handling AC input
More information14 mm sq inch sq.
Allowable Load Internal Wiring Rotation Direction P.56 General Specifications P.57 Motor Dimensions P.69 to 74 14 mm sq..55 inch sq. 1.8 /step winding Lead wire type winding Lead wire type Model number
More informationDriver. 3 Extension Cables ( Page E-155)
Motorized ctuators System Configuration Not supplied DRS Series Compact Linear ctuator ccessories (Sold separately) Mounting Plates ( Page E-54) Limit Sensor (Connected by the customer) 2 DIN Rail Mounting
More informationORIENTAL MOTOR GENERAL CATALOG
ORIENTL MOTOR GENERL CTLOG 5-PHSE HIGH-TORQUE STEPPING MOTOR ND DRIVER PCKGE UPK Series Standard and High-Speed Types B-1 List of and Combinations B-117 Wiring Diagram B-11 Description of Input/Output
More information60 mm sq. (2.36 inch sq.)
6 mm sq. (.36 inch sq.) 1.8 /step RoHS Unipolar winding, Connector type Unipolar winding, Dimensions for attaching NEMA3 are interchangeable (47.14 mm-pitch) Bipolar winding, Connector type p. 76 Bipolar
More informationRoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features. The RBK Series is a motor and driver package
Stepping Motors RoHS-Compliant Stepping Motor and Package RBK Series dditional Information Technical reference Page F-1 Safety standards Page G- The RBK Series is a motor and driver package (Terminal box
More informationRoHS-Compliant 2-Phase Stepping Motor and Driver Package RBK Series. Features
Stepping s RoHS-Compliant -Phase Stepping and Package RBK Series dditional Information Technical reference Page F- Safety standards Page G- The RBK Series is a motor and driver package consisting of a
More information5-Phase Stepping Motor and Driver Package n RK Series
Stepping s -Phase Stepping and Package n RK Series dditional Information Technical Reference F- General Information G- Introduction S S PLUS SC RK CFK CSK PMC UMK CSK PKPV PK UIG EMP EMP SG8J SMK ccessories
More informationBrushless DC Motor Systems AXH Series
Brushless DC Systems AXH Series The AXH Series combines a compact, brushless DC speed control motor and 24 VDC board-level driver. These systems provide space savings and high power output, and are easy
More informationNew Servo Concept: Junma
New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter
More informationConnection and Operation
Connection and Operation Names and Functions of Parts 4 1 Monitor Display LED Indicators DG60 1 5 Motor Connector Power Connector Indication Color Function When Activated OPERATI Green Power Supply Indication
More informationSGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit.
Rotary s Model Designations - mini Series st+nd digits 3rd digit th digit th digit 6th digit 7th digit st+nd digits Rated Output th digit Design Revision Order 7th digit Options Code Code Code B3 3.3 W
More informationSTEPPING SYSTEMS. Stepping Systems. Phase. Release 1.0
TEPPING YTEM Phase tepping ystems Release. afety Consideration The PM drivers and stepping motors are the products designed to be used for the general industrial devices. When using those, pay enough attention
More informationORIENTAL MOTOR GENERAL CATALOG
ORIENTL MOTOR GENERL CTLOG STEPPING MOTORS 5-PHSE STEPPING MOTOR ND MICROSTEP DRIVER PCKGE RFK Features B-64 Specifications B-67 Speed vs.torque Characteristics B-68 Dimensions B-69 List of Motor and Combinations
More informationCMK Series. RoHS-Compliant 2-Phase Stepping Motor and Driver Package. Features
Motors RoHS-Compliant -Phase Motor and Package CMK Series The CMK Series is a motor and driver package consisting of a -phase stepping motor and VDC input micro step driver, allowing for a reduction in
More informationDiameter ø50mm Shaft type Absolute Multi-turn Rotary Encoder
Dia ø50mm Shaft type Absolute Multi-turn otary Encoder Features Compact size of dia ø50mm Parallel data / SSI data transmission type Total 23bit resolution(8388608 divisions) of 10bit single-turn(1024
More informationResolution (divisions) 256, 360, , 360, 720, 1,024 Pre-wired Model
Authorised Distributors:- ASH & ALAIN INDIA PVT LTD S-100, F.I.E.E., Okhla Industrial Area, Phase-ii, New Delhi-110020(India) Tel : 011-4797575 Fax : 011-4797574 E-mail : sales@ashalain.com Absolute 60-mm-dia.
More informationEzi-STEP MINI Characteristics
Ezi-STEP MINI Characteristics Ezi-STEP MINI is a micro stepping system that incorporates a motor and DSP (Digital Signal Processor) equipped drive that is integrated seamlessly together as a system. This
More informationPower supply voltage Output configuration Output code Resolution (pulses/rotation) Connection method Model
60-mm-dia. Encoder Rugged Encoder for High-precision Detection of Automatic Machine Timing Rugged construction with the highest shaft loading. Radial: 120 N, Thrust: 50 N IP65f water- and oil-proof construction.
More informationORIENTAL MOTOR GENERAL CATALOG
OIENTAL MOTO GENEAL CATALOG STEPPING MOTOS 2-PHASE STEPPING MOTO AND DIVE PACKAGE UMK Series Features B-21 Standard Type B-214 High-esolution Type B-222 List of Motor and Combinations B-225 Wiring Diagrams
More information6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
More informationMODEL: MRP5. Final Control Elements. [2] TERMINAL BOX T: With
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator 1/1 high resolution Easy adjustment: electronic limiter at the valve open & closed
More informationProposing control by a hydraulic servo and V/F inverters
Drive Goods SSCNET III/H Analog Speed Command Unit (Number of Control Axes: Axes) [DGAF/DGAF-P0] New Product Release No. Proposing control by a hydraulic servo and V/F inverters using a SSCNET III/H compatible
More informationNo Gain Tuning. Hunting. Closed Loop System
2 No Gain Tuning Conventional servo systems, to ensure machine performance, smoothness, positional error and low servo noise, require the adjustment of its servo s gains as an initial crucial step. Even
More informationMODEL: MRP6. Final Control Elements
Final Control Elements MINI-TOP ELECTRONIC ACTUATOR (rotary type) Functions & Features Small-size control valve actuator Electrical positioner incorporated 1/1000 high resolution Easy adjustment: electronic
More informationTRD-J Series Incremental Encoders
Series Incremental Encoders Features mm thick shaft and ø5 mm body Vibration and shock resistant metal slit plate durable at 1, P/R Operating voltage ranging from 4.75 to 3 VDC Totem-pole output facilitating
More informationDiameter Ø50mm Shaft Type Magnetic Multi-Turn Absolute Rotary Encoder MGAM50S B F PN 24
Ø0mm Shaft Magnetic Multi-Turn Absolute Type Diameter Ø0mm Shaft Type Magnetic Multi-Turn Absolute otary Encoder Features Higher resistant to vibration and impact by magnetic elements than optical encoder
More informationAbsolute Rotary Encoder
Absolute Rotary Encoder Use the Tough (Rated IP64 for Degree of Protection) Combined with a PLC or Cam Positioner for Optimum Control and Ease-of-Use Incorporates a sealed bearing, meeting IP64 for durability
More informationTRD-J Series Incremental Encoders
Series Encoders eatures ong-lasting disign of mm shaft in ø5mm body. urable metal slit plate. Protection degree IP5 (dust proof) or IP65 (dust and splash proof). Wide voltage ranging from 4.75 to 3 VC.
More informationTechnical Document. for the. CB 016N6 Driver Card
Technical Document for the CB 06N6 Driver Card Contents Introduction 3 Page New functions 3 3 Dimensions 3 4 I/O Interface 4 5 Connectors 4-5 6 Switches 5-6 7 Potentiometers 7 8 LEDs and Error Indications
More informationData Sheet. Stepper Motor Drive Boards. Features
Data Pack B Issued March 0-6 Data Sheet Stepper Motor Drive Boards Unipolar stepper motor drive board (RS stock no. 7-6) and bipolar stepper motor drive board (RS stock no. -906) The unipolar drive board
More informationIncremental Rotary Encoder E6B2
Incremental Rotary Encoder General-Purpose Rotary Encoder Withstands arge Shaft oads Wide variety of supply voltages and output forms Easy-to-adjust zero index (phase Z) with origin indicating function
More informationMotor Drives & Controllers
Motor Drives & Controllers For the past 20 years, FORMOSA MOTORS is well known for pursuing high technology motors in Taiwan. To make customer s requirements satisfatisory & perfect We supply customers
More information$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF
$MPTFE -PPQ 4UFQQJOH 4ZTUFN.JOJBUVSJ[FE $PNQBDU 4J[F $MPTFE -PPQ 4ZTUFN /P (BJO 5VOJOH /P )VOUJOH )JHI 3FTPMVUJPO 'BTU 3FTQPOTF ú ú ú ú ú ú 2 2 No Gain Tuning Conventional servo systems, to ensure machine
More informationABSOLUTE ROTARY ENCODER SSI
Main Features - Compact and heavy-duty industrial model - Interface: Synchronous-serial (RS422/485) - Housing: 58 mm - Shaft: 6 or 10 mm - Resolution: Max. 25 Bit =,554,42 steps over 4,096 revolutions
More informationCable lead-out. Standard. Rear lead-out (Connecter used in models 58 and 65) Variation. Side lead-out is available. (Models 25, 32, and 40) Option
SHA Series The SHA series comprises AC servo actuators that integrate a thin speed reducer HarmonicDrive for precision control and a super flat AC servo motor. The SHA series features an unmatched compact
More informationPKG-171-MBC25-PS-CBL System Diagram and Specifications
PKG-171-MBC25-PS-CBL System Diagram and Specifications Included Components: 17Y102S-LW4-MS Stepper Motor MBC25081TB Stepper Driver PSAM24V2.7A Power Supply CBL-20AWG-04C-010-MS Motor Cable CBL-AA4366 Power
More informationSmartStep servo motors
HARGE R7M-A@, R7M-AP@ SmartStep servo motors The smart alternative to stepper motors SmartStep motors can be controlled by SmartStep drive and XtraDrive ylindrical and flat servo motor types are available
More informationResolution (divisions) Pre-wired Model E6F-AB3C 360P/R 2M *2 Pre-wired Connector E6F-AB3C-C 360P/R 2M *2 Model (2 m) NPN open collector BCD 360
Absolute 60-mm-dia. Rotary Encoder CSM DS_E_7_1 Rugged Rotary Encoder Absolute model. External diameter of 60 mm. Resolution of up to 1,024 (10-bit). IP65 oil-proof protection. Strong shaft. Radial: 120
More informationMaterial: Weight: Bearing Life: Shaft Speed: Starting Torque: Mass Moment of Inertia: Shaft Loads:
Shaft Encoder - Ø 50 mm Shaft: Ø 6 mm to Ø 12 mm Resolution up to 12.500 ppr IP 65 (IP 67 option) Formerly named 2R or 2R-3L Automation / Electrical Specifications Code: Resolution: Supply Voltage: Voltage:
More informationFastech Co.,Ltd. Table of Contents
Fastech Co.,Ltd. Table of Contents 2 Before operating Thank you for purchasing Ezi-STEP. For high-speed and high-precision drive of a stepping motor, Ezi-STEP is an unique drive that adopts a new control
More informationRBK Series. 2-Phase Stepping Motor and Microstep Driver Package. RoHS-Compliant
RoHS-Compliant -Phase Stepping Motor and Microstep Package RBK Series -phase stepping motor and DC input microstep driver package. Includes Oriental Motor's proprietary Smooth Drive Function to easily
More informationCL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T
CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more
More informationEncoder - Absolut 2RMHF-SSI
Absolute Encoder: Ø24 mm Hollow Shaft: Ø3 mm to ¼ Inch Singleturn or Multiturn SSI Interface Binary or Gray Code Preset of Zero Position Choice of Counting Direction IP-Rating: IP64 or IP67 Mechanical
More informationServo Motors B-9. Overview. Tuning-Free NX. Tuning-Free NX Series. Servo Motors. Accessories. Page. NX Series B-10 B-9
Servo Motors B-9 Overview NX Servo Motors Accessories Page B-1 B-9 B-1 Servo Motor and Driver Package Technical reference Page H-1 Regulations & Standards Page I-2 For detailed
More informationAC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA
AC SERVO DRIVES JUNMA SERIES Pulse Reference Type Mechatrolink-II Network Type GB D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo
More informationAbsolute encoders - SSI
with through hollow shaft Features Encoder multiturn / SSI Optical sensing method Resolution: singleturn 14 bit, multiturn 12 bit Compact design Cost-efficient mounting High reliability by self-diagnostics
More informationContents. USER MANUAL NI ISM-7400 Integrated Stepper
USER MANUAL NI ISM-7400 Integrated Stepper This manual describes the NI ISM-7400 integrated stepper. It describes electrical and mechanical characteristics of the devices, as well as I/O functionality.
More informationRotary Measuring Technology
SSI or parallel interface Highest shock resistance on the market ( 2500 m/s2, 6 ms acc. to DIN IEC 68-2-27) Divisions: up to 16384 (14 bits), singleturn Housing Ø 58 mm IP 66 Various options (e.g. LATCH,
More informationCooling Fans G-17. Cooling Fans G-17. AC Input/Low-Power Consumption EMU Series. AC Input/Compact Size MU Series
Cooling G-17 Cooling / E / / / S / / V / E / P E S V E P D D Page Introduction G-18 E G-22 G-26 G-36 G-52 S G-56 Low Speed G-76 V G-80 E G-82 P G-84 G-17 G-18 Technical reference
More informationNPN PNP NPN PNP NPN PNP
Cam Positioner Low-Cost, High-Performance Electronic Cam Switch for Use with OMRON E6F Rotary Encoder Control outputs can be programmed to turn ON/OFF in 1 units of rotary encoder shaft rotation Handles
More informationINS500 Series Driver ( **CE Approved ) 5 Phase NanoDrive DC Type Driver Units
INS Series Driver ( **CE Approved ) Phase NanoDrive DC Type Driver Units A compact package matching most existing motors Vdc Supply Input High Resolution possible ( selectable up to, steps per revolution
More informationExpress Delivery. Axial. Connection
HIGH RESOLUTION INCREMENTAL SOLID SHAFT ENCODER FOR INDUSTRIAL APPLICATIONS Resolution up to 50.000 pulses per turn External diameter 58 mm Shaft from Ø 6 to 12 mm Protection class IP67 according to DIN
More informationIXARC Incremental Encoder UCD-IPT M100-PRD. Interface Programmable Incremental. Configuration Tool UBIFAST Configuration Tool (Version 1.6.
IXARC Incremental Encoder UCD-IPT00-08192-M100-PRD Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration
More informationPosition Table Function. Closed Loop System. Network Based Motion Control. No Gain Tuning
2 2 Position Table Function Position Table can be used for motion control by digital input and output signals of host controller. You can operate the motor directly by sending the position table number,
More informationNA1-PK3 SERIES. Compact Size Picking Sensor. Boasts a compact, pocket lighter size enabling universal installation
44 PHOTO PHOTO Compact Size Sensor NA-PK SERIES Related Information General terms and conditions... F- Glossary of terms... P.549~ guide... P.49~ General precautions...p.55~ Recognition Make sure to use
More informationRotary Measuring Technology
Our ATEX encoders now also carry approval for Dust Flameproof-enclosure type of construction with approval for Zone 1 and 21 ExII2GEExdIICT6 and ExII2DIP6xT85 C Shaft ø 12 mm One type for every situation:
More informationTRD-N/NH Series Incremental Encoders
/N Series Encoders TRD-K TRD-K A TRD-GK TRD-J /N TRD-2E TRD-S/S Features Shaft and ollow Shaft type are available. Compact body with 5mm diameter and 35mm depth. Wide range of resolution from 1 to 2,5P/R.
More informationHollow Rotary Actuators. DG Series. Frame Size 130 ( 5.12 in.) mm. Frame Size 85 ( 3.35 in.) mm. Frame Size 60 ( 2.36 in.) mm
Hollow Rotary Actuators DG Series Frame Size 13 ( 5.12 in.) mm Frame Size 85 ( 3.35 in.) mm Frame Size 6 ( 2.36 in.) mm Hollow Rotary Actuators DG Series Hollow Rotary Actuators DG Series m 3 install base
More informationSupply voltage Output configuration Resolution (P/R) Model 12 to 24 VDC Complementary output 100, 200, 360, 500, or 600 E6F-CWZ5G 1,000
Incremental 60-mm-dia. Rotary Encoder E6F-C The Strongest Shaft for Tough Jobs The strongest shaft of any OMRON Incremental Encoder (120 N in the radial direction and 50 N in the thrust direction). Water-
More informationSGMJV. Rotary Servomotors SGMJV - 01 A D A 2 1. Model Designations. 2Without Gears. 1st+2nd digits. 3rd digit. 5th digit. 6th digit.
Rotary s Designations 2Without s - D 2 Series st+2nd s rd 4th th th 7th st+2nd s Rated Output th Design Revision Order 7th Options Code W W C2 W 2 2 W 4 4 W W 8 7 W rd Power Supply Voltage Code th Code
More informationRDV-X/RDV-P Robot driver Only for pulse train control
Single axis Robot driver Only for pulse train control As the size is small and weight is light, it is easy to use in automated machinery. Features 1 Dedicated pulse train control The dedicated pulse train
More information5th digit. 4th digit. 6th digit. Design Revision Order. Shaft End. Code Specifications
Rotary s Designations 2Without Gears - 0 D 2 Series st+2nd digits 3rd digit 4th digit 5th digit 6th digit 7th digit st+2nd digits Rated Output 5th digit Design Revision Order 7th digit Options Code 5 50
More informationBrake Unit. Contents. Brake Unit Overview Product information C-26 C-27
Contents Overview Product information C- C- This product is for industrial equipment. Don't use this product at general household. industrial.panasonic.com/ac/e/ C- Overview Outline of These s are electric
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 205-S ULTRASTAB I PN = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Wide operating temperature
More informationCommitted to Premium Quality. AC Servo System Catalog
Committed to Premium Quality AC Servo System Catalog Company Profile CONTENTS DB100 Series AC Servo System 03 Application fields 04 Servo Driver Product Description 05 Servo Motor Product Description 07
More informationFor ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Applications.
Current Transducer IT 200-S ULTRASTAB I PM = 200 A For ultra-high precision measurement of current: DC, AC, pulsed..., with galvanic separation between primary and secondary. Features Closed loop (compensated)
More information30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization
2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor
More informationPKP Series. Bipolar 1.8 and 0.9 Stepper Motors. with Encoders. Features. Product Lineup
Bipolar. and.9 Stepper s PKP Series with s Introducing the new. Standard and.9 High Resolution PKP Series stepper motors with an incremental Line Driver or Voltage output type encoder pre-assembled. Features
More information20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V
20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor
More informationGalvanometer Scanner Driver GVD0 Series Instruction Manual
CX5-091 Sep. 2018 Ver. 6.1 Galvanometer Scanner Driver GVD0 Series Instruction Manual CITIZEN CHIBA PRECISION CO., LTD. 1 Contents Preface.2 1. Specification..3 2. Product Overview..4 3. Input / Output
More information(For Rotary Servomotors)
MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A 002 00 0 v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit
More information256, 360, 720, 1,024. E6C3-AN1E 256P/R 1M Voltage output Binary VDC E6C3-AN2E 256P/R 1M
Slim Encoder with Diameter of 0 mm CSM DS_E_7_2 Rugged Rotary Encoder Absolute model. External diameter of 0 mm. Resolution of up to,024 (0-bit). IP (improved oil-proof protection with sealed bearings)
More informationTechnical data. General specifications. Measurement range min max. 360
Model Number Features Very small housing High climatic resistance 12 Bit singleturn Analog output Surge and reverse polarity protection Description This absolute rotary encoder with internal magnetic sampling
More informationIt is widely used in curving machine, processing equipment, packing machine, electronic machine, and etc.
DVS 2811 Description The DVS2811 is full digital 2-phase stepper driver based on DSP control,the voltage ranges from 40V to 130VAC. It is designed for use with the 2-phase hybrid stepper motor of all kinds
More informationHardware Manual. STR4 & STR8 Step Motor Drives
Hardware Manual STR4 & STR8 Step Motor Drives 92-3J 92-3J Contents Introduction... 3 Features... 3 Block Diagram... 4 Getting Started... 5 Mounting the Drive... 6 Connecting the Power Supply... 6 Drive
More informationRotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
More informationAC SERVO DRIVES SERIES. Rotary Servomotors. Certified for ISO9001 and ISO14001
C SERVO DRIVES SERIES Rotary Servomotors Certified for ISO91 and ISO141 JQ-422 JQ-EM22 CONTENTS Rotary Servomotors SGMMV (ow Inertia, Ultra-small Size) 4 SGM7J (Medium Inertia, High-speed) 14 SGM7 (ow
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationIMS51 Series Driver 5 Phase Stepper Driver Units
IMS51 Series Driver 5 Phase Stepper Driver Units A compact package matching most existing motors 100~120Vac or 200~220Vac Single Phase Power Input Opto-isolated inputs and outputs Auto-current down feature
More information4th digit. 5th digit. 6th digit. Code Specifications. Design Revision Order. Code Specifications. Standard. Code Specifications
Rotary s Model Designations - D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output Code Specifications. kw. kw. kw. kw 3 3. kw. kw. kw 7 7. kw : vailable only
More informationJR12 Jam Nut Mount Optical Encoder
Improving the Quality of Life through the Power in Light JR12 Jam Nut Mount Optical Encoder QPhase Design Features: Replaces Size 15 Pancake Resolver Bearing design simplifies encoder attachment Resolutions
More informationTechnical data. General specifications V DC Power consumption P 0. 1 W Time delay before availability t v
Model Number SYNCHRON SERIELLES INTERFACE Features Very small housing Up to 32 Bit multiturn SSI interface Free of wear magnetic sampling High resolution and accuracy Description The ENA36IL series are
More informationHG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
More informationPRELIMINARY RE36 SERIES MAGNETIC ENCODER
RE6 SERIES MGNETIC EODER The RE6 is a high-speed rotary magnetic encoder designed for use in harsh environments. The traditional design enables easy integration on existing machines. magnet is mounted
More information