(For Rotary Servomotors)
|
|
- Ashley Beasley
- 6 years ago
- Views:
Transcription
1 MECHATROLINK-III Communications Reference SERVOPACKs SGDV- E2 (For Rotary Servomotors) Designations S G D V - 2R9 E 2 A v Series SGDV SERVOPACKs with DC Power Input st+2nd+ 3rd digits 4th digit 5th+6th digits 7th digit 8th+9th+ 0th digits th+2th digits 3th digit st+2nd+3rd digits Voltage Code Applicable Servomotor Max. Capacity k 24 VDC/ R VDC 2R th digit Code E 48 VDC* Current Power Supply Voltage 7th digit Design Revision Order A, B 8th+9th+0th digits Options (hardware) Code 002 Base-mounted, varnish(standard) th+2th digits Options (software) Code 00 Standard 3th digit Options (parameter) Code 0 Standard 5th+6th digits Interface Code 2 MECHATROLINK-III communications Reference (for rotary servomotors) *: Either a 24-VDC or a 48-VDC power supply can be used for the main circuit. The control power supply must be 24 VDC. Note: If the option codes digits 8 to 3 are all zeros, they are omitted. 36
2 SERVOPACKs with DC Power Input SGDV- E2 Features Real-time communications MECHATROLINK-III communications enable high-speed control for 62 stations at a transmission speed of 00 Mbps in a transmission cycle from 25 μs to 4 ms (set by the host controller). Such a high transmission speed allows real-time transmission of various data required for control. Cost savings The 62 stations can be connected to a single MECHATROLINK-III transmission line, so wiring costs and time are greatly reduced. Also, only one signal connector is required on the host controller. And, the all-digital network eliminates the need for conversion from digital to analog for speed/torque references and for a pulse generator to generate position references. High-precision motion control The SGDV SERVOPACK when connected to the host controller in the MECHATROLINK-III network provides not only torque, position, and speed control but also synchronized phase control that requires advanced control technology. The control mode can be changed online so that the machine can move smoothly in complex motions with great efficiency. Ratings SERVOPACK SGDV- R7E 2R9E Applicable Servomotor Max. Capacity k Continuous Output Current Arms Max. Output Current Arms Regenerative Resistors Main Circuit* 24 VDC±5% 48 VDC±5% 24 VDC±5% 48 VDC±5% Control Circuit None 24 VDC±5% *: Either a 24-VDC or a 48-VDC power supply can be used for the main circuit. hen a 24-VDC power supply is used, the torque-motor speed characteristics for a 48 VDC cannot be achieved. SERVOPACK Overload Characteristics Detecting time (s) 00 0 SGMMV-B3E, -B5E SGMMV-B9E Torque reference (percent of rated torque) (%) Detecting time (s) 00 0 SGMMV-AE,-A2E, -A3E Torque reference (percent of rated torque) (%) Note: Overload characteristics shown above do not guarantee continuous duty of 00% or more output. Use a servomotor with effective torque within the continuous duty zone of Torque-Motor Speed Characteristics. DC MECHATROLINK-III Type SERVOPACKs 362
3 Items Control Method Feedback Operating Conditions PM control, sine-wave driven Serial encoder: 7-bit (incremental/absolute) Ambient Temperature 0 to +55 C Storage Temperature 20 to +85 C Ambient Humidity 90%RH or less Storage Humidity 90%RH or less ith no freezing or condensation Vibration Resistance 4.9 m/s2 Shock Resistance 9.6 m/s2 Protection Class IP0 An environment that satisfies the following conditions. Free of corrosive or flammable gases Pollution Degree 2 Free of exposure to water, oil, or chemicals Free of dust, salts, or iron dust Altitude 000 m or less Others Do not use SERVOPACKs in the following locations: Locations subject to static electricity noise, strong electromagnetic/magnetic fields, radioactivity Applicable Standards UL508C EN550/A, EN ,EN6800-3, EN Mounting Base-mounted Speed Control Range : 5000 (The lower limit of the speed control range must be lower than the point at which the rated torque does not cause the servomotor to stop.) Load Fluctuation 0% to 00% load: ±0.0% max. (at rated speed) Performance Speed Voltage Fluctuation Rated voltage: ±0% : 0% (at rated speed) Regulation * Temperature Fluctuation 25±25 C : ±0.% max. (at rated speed) Torque Control Tolerance (Repeatability) ± % Soft Start Time Setting 0 to 0 s (can be set individually for acceleration and deceleration.) Number of Channels 3 channels I/O Signal Communications Sequence Input Sequence Output Computer (USB) Input Signals which can be allocated Fixed Output Output Signals which can be allocated Homing deceleration switch signal (/DEC) External latch signals (/EXT ) Functions Forward run prohibited (P-OT), reverse run prohibited (N-OT) Forward external torque limit (/P-CL), reverse external torque limit (/N-CL) Positive and negative logic can be changed. Servo alarm (ALM) Number of 3 channels Channels Positioning completion (/COIN) Speed limit detection (/VLT) Speed coincidence detection (/V-CMP) Brake (/BK) Rotation detection (/TGON) Functions arning (/ARN) Servo ready (/S-RDY) Near (/NEAR) Torque limit detection (/CLT) Positive and negative logic can be changed. Compatible with Sigmain+. Compliant with the USB. standard (2 Mbps) Display DIP Switches for MECHATROLINK-III Communication Settings Analog Monitor Servo alarm (ALM): red, servo ready (RDY): green, link (LK): green, link 2 (LK2): green, communications (COM): green S DIP switch Number of poles: 8 *2 S2 DIP switch Number of poles: 4 *2 Number of points: 2 Output voltage: ±0 VDC (linearity effective range: ±8 V) Output through the analog monitor unit (model: JUSP-PC00-E) *: Speed regulation is defined as follows: Speed regulation = No-load motor speedtotal load motor speed 00% Rated motor speed The motor speed may change due to voltage fluctuation or temperature fluctuation. The ratio of speed changes to the rated speed represent speed regulation due to voltage and temperature fluctuations. *2: For details, refer to 4.. Setting Switches S and S2 in the AC Servo Drives DC Power Input v Series USER S MANUAL Design and Maintenance (Cont d) 363
4 SERVOPACKs with DC Power Input SGDV- E2 Items Dynamic Brake (DB) Regenerative Processing Overtravelling (OT) Prevention Protective Functions Utility Functions MECHATROLINK-III Communications Command Method Communications Protocol Station Address Transmission Speed Transmission Cycle Number of Transmission Bytes Performance Command Input Profile Not available Not available Decelerate to a stop or coast to a stop when overtraveling is detected and an overtravel signal (P-OT or N-OT) is input. Overcurrent, Overvoltage, low voltage, overload, etc. Gain adjustment, alarm history, JOG operation, origin search, etc. MECHATROLINK-III 03H to EFH (max. number of slaves: 62) Set by using the S DIP switch. 00 Mbps 25μs, 250μs, 500μs, 750μs, ms to 4 ms (increments of 0.5 ms) Can be switched between 6 bytes/station, 32 bytes/station, or 48 bytes/station Set by using the S2 DIP switch. Position control, speed control, and torque control through MECHATROLINK-III communications MECHATROLINK commands (for sequence, motion, data setting/reference, monitoring, adjustment, and other commands.) MECHATROLINK-II compatible profile MECHATROLINK-III standard servo profile DC MECHATROLINK-III Type SERVOPACKs 364
5 Power Supply Capacities and Power Losses The following table shows SERVOPACK s power supply capacities and power losses at the rated output. Main Circuit Power Supply Applicable Servomotor Max. Capacity SERVOPACK SGDV- Main Circuit Power Supply Capacity per SERVOPACK Output Current Arms Main Circuit Power Loss Regenerative Resistor Power Loss Control Circuit Power Loss Total Power Loss 24 VDC R7E R9E VDC R7E R9E Note: These power supply capacities are net values at instantaneous maximum loads. 365
6 SERVOPACKs with DC Power Input SGDV- E2 Selecting Cables Cables for CN CN3 CN5 CN6 CN7 (MECHATROLINK-III Communications Reference SERVOPACKs) CN6 MECHATROLINK-3 Communication Cable Connect to the MECHATROLINK-3 CN Cable for I/O Signals LED Indicator for External Device CN7 Connection Cable for Personal Computer Analog Monitor Unit Connection Cable Analog Monitor Unit Cable for Analog Monitor CN5 CN3 Power Supply Cable Insulated AC/DC Converter for Control Circuit Power Supply Insulated AC/DC Converter for Main Circuit Power Supply Name Length Order No. Details CN Cables for I/O Signals Cable with Loose wire at One End m JZSP-CFI02--E 2 m JZSP-CFI02-2-E 3 m JZSP-CFI02-3-E () m JZSP-CFG00-0-E 2 m JZSP-CFG00-02-E CN3 Power Supply Cables Cable with Loose wire at One End 3 m JZSP-CFG00-03-E 4 m JZSP-CFG00-04-E 5 m JZSP-CFG00-05-E 6 m JZSP-CFG00-06-E 7 m JZSP-CFG00-07-E SERVOPACK End Power Supply End (2) 8 m JZSP-CFG00-08-E 9 m JZSP-CFG00-09-E 0 m JZSP-CFG00-0-E DC CN5 Analog Monitor Unit Cable CN6A CN6B MECHATROLINK-III Communication Cable CN7 Connection Cables for Personal Computer Analog Monitor Unit JUSP-PC00-E (3) Analog Monitor Unit Connection Cable Cables for Analog Monitor Cables with Connectors at Both Ends Cables with Connectors at Both Ends (with Ferrite Core) Cable with Loose wire at One End SERVOPACK End Analog Monitor Unit End 0.3 m JZSP-CFS06-A3-E (4) Analog Monitor m JZSP-CA0-E Unit End (5) 0.2 to JEPMC E (6) 0 to JEPMC E (7) 0.5 to JEPMC-604- E (8) Cable with Connectors at Both Ends 2.5 m JZSP-CVS06-02-E (9) MECHATROLINK-III Type SERVOPACKs 366
7 Selecting Cables () Cable with Loose ires at One End for CN (: JZSP-CFI02- -E) SERVOPACK End Connector (2 poles): (by Molex Japan Co., Ltd.) Contact: (Chained) (Loose wires) (8.85) (8.28) JZSP-CFI02--E JZSP-CFI02-2-E JZSP-CFI02-3-E 7.4 Dia. Cable: CMX/ /2A-SR LF AG24 5P (by Taiyo Cabletec Corp.) Cable Length m 2 m 3 m 00 5 Shield Marking sticker Cable with Loose ires at One End for CN Connection Diagram of JZSP-CFI02- -E Cable Pin No SERVOPACK End ire Marking Signal Color FG +24VIN P-OT ALM COM_SG /DEC N-OT SO3 SO2 /BK Shield Orange Orange Gray Gray hite hite Yellow Yellow Pink Color Red Red Red Red Dots Host Controller End Lead Marker Represents twisted-pair wires. (2) Cable with Loose ires at One End for CN3 (: JZSP-CFG00- -E) SERVOPACK End Connector (6 poles): (by Molex Japan Co., Ltd.) Contact: (Chained) 50 L 3C AG20 (BRG/Y) (by Hitachi Cable Ltd.) Cable: CL2-UL2464-AM 9.85 Heat-shrinkable Tube () 45 (8.28) 5. Dia. Cable: CL2-UL2464-AM 3C AG20 (YG/Y) (by Hitachi Cable Ltd.) 2 35 JZSP-CFG00-0-E JZSP-CFG00-02-E JZSP-CFG00-03-E JZSP-CFG00-04-E JZSP-CFG00-05-E JZSP-CFG00-06-E JZSP-CFG00-07-E JZSP-CFG00-08-E JZSP-CFG00-09-E JZSP-CFG00-0-E Cable Length m 2 m 3 m 4 m 5 m 6 m 7 m 8 m 9 m 0 m Pin No. Cable Color Signal Green/yellow FG 2 Green/yellow FG 3 Blue L2 4 hite C2 5 Yellow C 6 Red L 367
8 SERVOPACKs with DC Power Input SGDV- E2 Selecting Cables (3) Analog Monitor Unit (: JUSP-PC00-E) CN4: Connector for Analog Monitor CN3: Connector for Digital Operator (4) Analog Monitor Unit Connection Cable for CN5 (: JZSP-CFS06-A3-E) Connector: EL (by Sumitomo 3M Ltd.) Shell: AO-008 Socket: DF-6DS-2C (by Hirose Electric Corporation.) Contact: DF-2428SCF (by Hirose Electric Corporation.) Cable: CMX /2A-SB AG24 4P (by Taiyo Cabletec Corp.) DC MECHATROLINK-III Type SERVOPACKs Dia Nameplate CN: Connector for SERVOPACK Note: The cable (JZSP-CFS06-A3-E) to connect the SERVOPACK is not included
9 Selecting Cables (5) Analog Monitor Unit Cable for CN4 (: JZSP-CA0-E) SocketDF-4DS-2C* Contact DF-2428SCF* hite * : Manufactured by Hirose Electric Corporation. Red View from Cable End Pin No. Cable Color Signal Standard Settings Red Analog Monitor 2 Motor speed : V/000 min- 2 hite Analog Monitor Torque reference : V/00% rated torque 3, 4 (2 cables) GND (0V) Note : The specifications above are factory settings. Monitor specifications can be changed by changing parameters Pn006 and Pn007. (6) Cables with Connectors at Both Ends for CN6 (: JEPMC E) L (7) Cables with Connectors at Both Ends (ith Ferrite Core) for CN6 (: JEPMC E) L Cable Length (L) Cable Length (L) JEPMC-602-A2-E 0.2 m JEPMC E 0 m JEPMC-602-A5-E 0.5 m JEPMC E 20 m JEPMC E m JEPMC E 30 m JEPMC E 2 m JEPMC E JEPMC E 3 m JEPMC E 4 m JEPMC E 5 m JEPMC E 0 m JEPMC E 20 m JEPMC E 30 m JEPMC E (8) Cable with Loose ire at One End for CN6 (: JEPMC E) L JEPMC-604-A5-E JEPMC E JEPMC E JEPMC E JEPMC E JEPMC E JEPMC E Cable Length (L) 0.5 m m 3 m 5 m 0 m 30 m IMPORTANT Use a MECHATROLINK-III communications cable specified by Yaskawa. hen using other cables, noise resistance may be reduced, and operation cannot be guaranteed. 369
10 SERVOPACKs with DC Power Input SGDV- E2 Selecting Cables (9) Connection Cable for Personal Computer for CN7 (: JZSP-CVS06-02-E) +00 2, to 20 JZSP-CVS06-02-E (00) (55) IMPORTANT Use a cable specified by Yaskawa. hen using other cables, operation cannot be guaranteed. DC MECHATROLINK-III Type SERVOPACKs 370
(For Linear Servomotors) S G D V - R70 A 21 A th digit. 7th digit. 5th6th digits
MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th6th
More information4th digit. 5th+6th digits. 7th digit. Specifications. 8th+9th+10th digits Options (hardware)* 4. Interface
MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit 5th+6th
More information4th digit. 7th digit. digits. Specifications. Interface. MECHATROLINK-2 communications Reference Type (for rotary servomotors)
MECHATROLINK- Communications Reference Type PACKs SGDV- (For Rotary Servomotors) SGDV- 5 (For Linear Servomotors) Model Designations S G D V - R70 A A 000 00 0 v Series SGDV PACK st+nd+ rd digits 4th digit
More informationAnalog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs. (Analog Voltage Reference) SGDV- EP1. (Pulse Train Reference)
Analog Voltage Reference SERVOPACKs Pulse Train Reference SERVOPACKs SGDV- ES (Analog Voltage Reference) SGDV- EP (Pulse Train Reference) Model Designations S G D V - 2R9 E S A 002 00 0 vseries SGDV SERVOPACKs
More informationAnalog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B
Analog Voltage/Pulse Train Reference Type SERVOPACKs SGDV- 0 (For Rotary Servomotors) SGDV- 05 (For Linear Servomotors) Model Designations SGDV - R70 A 0 B 002000 Options 002000 Base-mounted, varbish(standard)
More information(For Rotary Servomotors) (For Linear Servomotors) SGDV - R70 A 01 B Voltage Interface 100 VAC 200 VAC 400 VAC V (Three Phase)
MECHATROLINK-III Communications Reference Type s SGDV- (For Rotary Servomotors) SGDV- (For Linear Servomotors) Designations SGDV - R70 A 0 B 00000 Options vseries SGDV Code 00000 Base-mounted, varbish(standard)
More informationAC SERVO DRIVES SERIES. Servopacks. Certified for ISO9001 and ISO14001
AC SERVO DRIVES SERIES Servopacks Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202 CONTENTS SERVOPACKs Single-axis Analog Voltage/Pulse Train Reference SERVOPACKs 326 Single-axis MECHATROLINK-II
More informationSERIES PRODUCT CATALOG
AC SERVO DRIVES SERIES PRODUCT CATALOG s Field-Proven Performance: A Servo that Does What You Need! Certified for ISO900 and ISO400 JQA-04 JQA-EM00 Series Product Catalog s s with AC Power Input Options
More informationSGDV- E5 (For Linear Servomotors)
PACKs with Additional Options SGDV- E (For Rotary Servomotors) SGDV- E5 (For Linear Servomotors) Model Designations SGDV- R70 A E A 000 00 0 v Series SGDV PACK Current Voltage 00 V 400 V Code Applicable
More informationSGDV- 01 SGDV- 05. Analog Voltage/Pulse Train Reference Type SERVOPACKs. (For Rotary Servomotors) (For Linear Servomotors)
Analog Voltage/Pulse Train Reference Type PACKs SGDV- 0 (For Rotary Servomotors) SGDV- 0 (For Linear Servomotors) Model Designations S G D V - R70 A 0 A 000 00 0 v Series SGDV PACK st+nd+ rd digits th
More informationUSER'S MANUAL Design and Maintenance
AC Servo Drives DC Power Input Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-III Communications Reference SGMMV Servomotor SGDV SERVOPACK Outline SigmaWin+ Wiring and Connection
More informationAC SERVO DRIVES JUNMA SERIES D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA
AC SERVO DRIVES JUNMA SERIES Pulse Reference Type Mechatrolink-II Network Type GB D E F I JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo
More informationSigmaLogic7 Compact Hardware Manual
SigmaLogic7 Compact Hardware Manual Table of Contents Table of Contents Introduction. SigmaLogic7 Compact Features - - - - - - - - - - - - - - - - -3. SigmaLogic7 Compact Appearance - - - - - - - - -
More informationJUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA AC SERVO DRIVES JUNMA SERIES. Goodwin Electronics: Tel: Web:
AC SERO DRIES JUNMA SERIES PULSE REFERENCE TYPE MECHATROLINK-II NETWORK TYPE EN DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA New Servo Concept JUNMA Contents Page 2 About YASKAWA New Servo
More informationSGMMV. Rotary Servomotors SGMMV - A1 A 2 A 2 1. Model Designations. 6th. 5th digit. 1st+2nd digits. 7th digit. 4th digit. 3rd digit.
Rotary s Model Designations - mini Series st+nd digits 3rd digit th digit th digit 6th digit 7th digit st+nd digits Rated Output th digit Design Revision Order 7th digit Options Code Code Code B3 3.3 W
More informationNew Servo Concept: Junma
New Servo Concept: Junma Junma uses the world s premier servo technology to provide unmatched performance with a quick and efficient setup. This totally new plug and play design concept requires no parameter
More informationLARGE-CAPACITY SERIES
AC SERVO DRIVES LARGE-CAPACITY SERIES V to 37 kw 4 V to 55 kw Servomotor SGMVV SERVOPACK SGDV Certified for ISO9 and ISO4 JQA-4 JQA-EM Strongest line-up ever! Newest servo drives increase speeds & improve
More informationΣ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives
AC Servo Drives Σ- Series SER'S ANAL Design and aintenance Rotational otor Command Option Attachable Type SGD SEROPACK SGJ/SGA/SGPS/SGG/SGS/SGCS s Outline Panel Display and Operation of Operator iring
More information2Encoder Cable Extension from 30 to 50 m. (Example) SGDV SERVOPACK. Servomotor. Main Circuit Cable SGMJV. Servomotor End CAUTION
s Cables Connections Standard Wiring (Max. encoder cable length: 0 m) SGDV SERVOPACK Encoder Cable (See page.) Encoder Cable Extension from 0 to 0 m (Example) SGDV SERVOPACK Relay Encoder Cable (See page.)
More informationSGMJV. Rotary Servomotors SGMJV - 01 A D A 2 1. Model Designations. 2Without Gears. 1st+2nd digits. 3rd digit. 5th digit. 6th digit.
Rotary s Designations 2Without s - D 2 Series st+2nd s rd 4th th th 7th st+2nd s Rated Output th Design Revision Order 7th Options Code W W C2 W 2 2 W 4 4 W W 8 7 W rd Power Supply Voltage Code th Code
More information5th digit. 4th digit. 6th digit. Design Revision Order. Shaft End. Code Specifications
Rotary s Designations 2Without Gears - 0 D 2 Series st+2nd digits 3rd digit 4th digit 5th digit 6th digit 7th digit st+2nd digits Rated Output 5th digit Design Revision Order 7th digit Options Code 5 50
More informationSigma-5 servo drive System configuration
SGDV-@ Sigma- servo drive The High perfomance servo family for motion control. Compact size, reduced space and integrated MECHATROLINK-II. Advance autotuning function Enhanced vibration supression function
More information6th digit. 5th digit. 4th digit. Code Specifications 3 20-bit absolute (standard) D 20-bit incremental (standard) Design Revision Order
Rotary s Model Designations - 3 D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output th digit Serial Encoder 7th digit Options Code 3 3 W W 9 8 W 3.3 kw.8 kw 3.9
More informationAnalog monitor cable. Filter Motion control unit. General purpose cable. (Refer to chapter Sigma-II rotary motors) Cables SGMGH, SGMUH, SGMSH, SGMBH
CHARGE NS A R C N B C N 4 XD-@, XD-@-E Intelligent servo drive. Integrated controller and network connectivity. NCT. Patented non-linear algorithm for tight control Very low tracking error with no overshoot
More informationΣ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive
AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Analog Voltage and Pulse Train Reference SGMJV/SGMAV/SGMGV/SGMCS Servomotors SGDV SERVOPACK Outline Panel Operator Wiring
More informationΣ-V Series. USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type. AC Servo Drives
AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and
More informationAC SERVO DRIVES JUNMA SERIES DE ES FR IT JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA JUNMA
AC SERO DRIES JNMA SERIES Pulse Reference Type Mechatrolink-II Network Type EN DE ES FR IT JNMA JNMA JNMA JNMA JNMA JNMA JNMA JNMA New Servo Concept JNMA Contents Page About YASKAA New Servo Concept JNMA
More informationTroubleshooting Alarm Displays Warning Displays
10 10.1 Alarm Displays............................................10-2 10.1.1 List of Alarms...................................................... 10-2 10.1.2 of Alarms............................................
More informationAC SERVO DRIVES SERIES. Rotary Servomotors. Certified for ISO9001 and ISO14001
C SERVO DRIVES SERIES Rotary Servomotors Certified for ISO91 and ISO141 JQ-422 JQ-EM22 CONTENTS Rotary Servomotors SGMMV (ow Inertia, Ultra-small Size) 4 SGM7J (Medium Inertia, High-speed) 14 SGM7 (ow
More informationDS2 series servo drive
DS2 series servo drive Manual WUXI XINJE ELECTRIC CO., LTD. Data No.: SC209 20110412 1.0 2 Safety notes Confirmation Do not use the drivers that are broken, lack of parts or wrong types. Installation Make
More informationΣ-V Series. USER'S MANUAL Design and Maintenance. AC Servodrive
AC Servodrive Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor Analog Voltage and Pulse Train Reference SGLGW/SGLFW/SGLTW/SGLCW Servomotors SGDV SERVOPACK Outline Panel Operator Wiring and
More informationTroubleshooting Alarm Displays Warning Displays
9 9.1 Alarm Displays..............................................9-2 9.1.1 List of Alarms........................................................ 9-2 9.1.2 of Alarms..............................................
More informationTroubleshooting Alarm Displays Warning Displays
8 8.1 Alarm Displays..............................................8-2 8.1.1 List of Alarms........................................................ 8-2 8.1.2 of Alarms..............................................
More informationIndexer unit JUSP-NS600. System configuration. Smart and simple positioning solution.
Smart and simple positioning solution. No programming languages are required. Connects directly to the drive Allows serial network control and discrete I/O control Servo axis set-up, actuation and monitoring
More informationCable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 NS500 JUSP-NS500 SERVOPACK. 200V Ver.
JUSP- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning
More informationEDB series AC servo system
EDB series AC servo system User s Manual V. 2.00 Estun Limited Warranty This manual does not entitle you to any rights. Estun reserves the right to change this manual without prior notice. All rights reserved.
More informationDS2 series 220V servo driver
DS2 series 220V servo driver Fast reference manual Xinje Electronic Co.,Ltd. Serial NO.SC209 20120312 1.0 2 DS2 series 220V servo driver user manual Safety caution Confirmation when receive products DO
More informationG5 Series Servo System
G5 Series Servo System Extreme mechatronics meets -Stream Automation»» Sub micron precision and ms settling time»» Motion network and safety built-in»» Double registration and full closed loop G5 Series
More informationΣ-V Series USER'S MANUAL Setup Rotational Motor
AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 Overview of Setup Installation Wiring and Connection Safety Function
More informationCopyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
Copyright 2014 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic,
More informationSeries SGDH Indexer Application Module USER'S MANUAL
YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication
More informationSGDH Amplifier. Part Number Guide. Quick Reference Guide. Amplifier: SGDH - 15 A E- Motor: SGMGH - 09 A C A 6 C $10
Quick Reference Guide SGDH Amplifier $ Document TRM--SGEN 9// V..4 Yaskawa Electric America Technical Training Services Part Number Guide Norman Dr. South Waukegan, IL 685-8-YASKAWA Fax: (847) 887-785
More informationCL86T. 24~80VDC, 8.2A Peak, Closed-loop, No Tuning. Descriptions. Closed-loop. Stepper. Applications. Datasheet of the Closed-loop Stepper CL86T
CL86T Closed-loop Stepper 24~80VDC, 8.2A Peak, Closed-loop, No Tuning Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor heating and more
More informationSingle-phase or three phase AC220V (-15% ~ +10%) 50 ~ 60Hz
KT270-H Servo Drive Features: The use of DSP ( digital signal processor ) chip, greatly accelerating the speed of data acquisition and processing, the motor running with good performance. Application of
More informationXtraDrive (XD-) SERIES AC SERVO DRIVER
XtraDrive (XD-) SERIES AC SERVO DRIVER Prior to installing the product, read these instructions thoroughly and retain for future reference. Short Form Installation Guide Catalog No. 8U0107 Revision B Introduction
More informationUSER S MANUAL Design and Maintenance
AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display
More informationPKG-EML10-EDB10-CBLS System Diagram and Specifications
PKG-EML10-EDB10-CBLS System Diagram and Specifications Included Components: EML-10APA22 AC Servo Motor EDB-10AMA Servo Driver BDM-GA16-05 Power Cable BMP-GA24-05 Encoder Cable EDB-BSC-CC24A Comm Cable
More informationJUNMA SERIES SERVO DRIVE
OMRON YASKAWA Motion Control B.V. Manual No. TOEP-C71080603-01-OY JUNMA SERIES SERVO DRIVE Mechatrolink-II communications type Model: SJDE- ANA-OY USER S MANUAL Copyright 2006 YASKAWA ELECTRIC CORPORATION
More informationDriver Specification for Linear Motor Drive Tables
Driver Specification for Linear Motor Drive Tables 355 35 2 1 3 4 NCR Specification of NCR for NT38V Low-voltage (DC24V) and compact design of 115 x 100 x 33.8 mm. It contributes to miniaturization of
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationSeries SGDH Indexer Application Module USER'S MANUAL
YASKAWA Series SGDH Indexer Application Module USER'S MANUAL MODEL: JUSP-NS600 YASKAWA MANUAL NO. SIE-C718-9B Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication
More informationSeries SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK
Series SGMBH/SGDH USER S MANUAL AC Servodrive (400 V, 22 to 55 kw) SGMBH Servomotor SGDH SERVOPACK YASKAWA YASKAWA MANUAL NO. SIE-S800-32.4 Copyright 2002 YASKAWA ELECTRIC CORPORATION All rights reserved.
More informationUSER S MANUAL Design and Maintenance
AC Servo Drives -V Series USER S MANUAL Design and Maintenance Rotational Motor Command Option Attachable Type SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors Outline Panel Display and Operation
More informationΣ-V Series USER'S MANUAL Setup Rotational Motor
AC Servo Drives Σ-V Series USER'S MANUAL Setup Rotational Motor SGDV SERVOPACK SGMJV/SGMAV/SGMPS/SGMGV/SGMSV/SGMCS Servomotors 1 2 3 4 1 Overview of Setup Installation Wiring and Connection Safety Function
More informationES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because of this,
More informationCable connection. Sigma-II series SERVOPACK SGDH- 200V. Ver. Servo Drive CN3 (CN10) CN1 CN2 JUSP-NS500 NS500 SERVOPACK. 200V Ver.
JUS- unit connectivity with positioning functionality. Connects directly to the drive Simplifies distributed control and information management No programming languages are required. Various positioning
More information1S servo drive System configuration
R88D-1SN@@@-ECT 1S servo drive Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance
More information1S servo drive System configuration
R88D-1SN@@@-ECT Sysmac general purpose servo 23-bit resolution encoder Fast and secure screw-less push-in in all connectors Pluggable connectors for easy pre-wiring and system maintenance Direct wiring
More information4th digit. 5th digit. 6th digit. Code Specifications. Design Revision Order. Code Specifications. Standard. Code Specifications
Rotary s Model Designations - D Series st+nd digits 3rd digit th digit th digit th digit 7th digit st+nd digits Rated Output Code Specifications. kw. kw. kw. kw 3 3. kw. kw. kw 7 7. kw : vailable only
More informationΣ-V Series. USER'S MANUAL Design and Maintenance. AC Servo Drives. Linear Motor MECHATROLINK-II Communications Reference
AC Servo Drives Σ-V Series USER'S MANUAL Design and Maintenance Linear Motor MECHATROLINK-II Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display
More informationUSER S MANUAL Design and Maintenance
AC Servo Drives -V Series USER S MANUAL Design and Maintenance Linear Motor MECHATROLINK-III Communications Reference SGDV SERVOPACK SGLGW/SGLFW/SGLTW/SGLC/SGT Linear Servomotors Outline Panel Display
More informationΣ-V Series. USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E. AC Servo Drives. Introduction. Parameter/Monitor Modes
AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator Model: JUSP-OP05A-1-E Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000
More information30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization
2-phase Hybrid Servo Drive 30-80V, 8.2A Peak, No Tuning, Nulls loss of Synchronization Closed-loop, eliminates loss of synchronization Broader operating range higher torque and higher speed Reduced motor
More informationSilverMax Datasheet. QuickSilver Controls, Inc. NEMA 23 Servomotors.
SilverMax Datasheet NEMA 23 Servomotors QuickSilver Controls, Inc. www.quicksilvercontrols.com SilverMax Datasheet - NEMA 23 Servomotors 23 Frame Sizes: 23-3, 23-5, 23H-1, 23H-3, 23H-5 / Series: E, E3,
More informationIntegrated Easy Servo
ies 1706 Integrated Easy Servo Motor + Drive + Encoder, 18 32VDC, NEMA17, 0.6Nm Features Easy servo control technology to combine advantages of open loop stepper systems and brushless servo systems Closed
More informationSigma-5: the 5-star servo drive
Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of
More informationAC Servo Motor Driver. LECYM Series
Doc. no. LEC-OM06903 (Doc no. JXC -OMT0064) PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYM Series Introduction This manual describes information required for designing, testing,
More informationAC Servo Motor Driver. LECYU Series
Doc. no. LEC-OM07102 PRODUCT NAME AC Servo Motor Driver MODEL / Series/ Product Number LECYU Series Introduction This manual describes information required for designing, testing, adjusting, and maintaining
More informationΣ-V Series. USER'S MANUAL Operation of Digital Operator. AC Servo Drives. Introduction. Parameter/Monitor Modes. Utility Function Mode
AC Servo Drives Σ-V Series USER'S MANUAL Operation of Digital Operator SGDV SERVOPACK Introduction Parameter/Monitor Modes Utility Function Mode Parameter Copy Mode 1 2 3 4 MANUAL NO. SIEP S800000 55A
More informationSGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications
SGDS Sigma III Servo Amplifier User Manual for Mechatrolink-II Communications Copyright 2004 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication may be reproduced, stored in a
More informationSD Series. AC Spindle Motor Drives with Power Regeneration, AC Servo Drives. Speed Reference with Analog Voltage Expanded Functions
AC Spindle Motor Drives with Power Regeneration, AC Servo Drives SD Series Speed Reference with Analog Voltage Expanded Functions Power Regeneration Converter Model CACP-JU SERVOPACK Model CACR-JU Spindle
More informationSystem configuration. Ratings 400 V Class three-phase 90 to 800 kw 690 V Class three-phase 90 to 1000 kw SX-D. Frequency inverters.
~ ~ SX High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationPRODUCT NOTE MOTION PRODUCT ENGINEERING GROUP
Subject: Motion Systems using Yaskawa Servo Amplifiers with Exlar Actuators Product: Sigma amplifiers (Sigma II SGDH, Sigma III SGDS, Sigma-5 SGDV) with Exlar SR and GSX series actuators Product Line Description:
More informationies-2309 Integrated Easy Servo
Datasheet of the integrated easy servo motor ies-09 ies-09 Integrated Easy Servo Motor + Drive + Encoder, 0-0VDC, NEMA, 0.9Nm Features Easy servo control technology to combine advantages of open-loop stepper
More informationFan and Pump AC Inverter
Fan and Pump AC Inverter Key Features for Fan and Pump Applications PID and Auto Energy Saving Functions. Input Phase Loss and Output Phase Loss Protection. LCD Keypad can be used to copy parameter settings
More informationDCS Series Brush DC Servo Drive. Datasheet
DCS Series Brush DC Servo Drive Datasheet Version DCS-2014-01 http://www.primopal.com DCS series Brush DC Servo Drives Description PrimoPal s DCS series Brush DC Servo Drive are fully digital brushed servo
More informationSigma-5. The 5-star servo drive.» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements
Sigma-5 The 5-star servo drive» Increases machine efficiency, performance & availability» Save time & cost» Meets demanding machine requirements Sigma-5: the 5-star servo drive It is a primary goal of
More informationSigma FSP Amplifier User s Manual
Sigma FSP Amplifier User s Manual Copyright 2006 by YEA, Yaskawa Electric America, Inc. FSP Amplifier User s Manual Catalog No.YEA-SIA-FSP-3, Revision 0 December, 2006 All rights reserved. No part of this
More informationSelecting Your SGMM Sigma Mini Servo System
Sigma Mini Servo System Selecting Your Sigma Mini Servo System First, select the Sigma servomotor suited for your application using SigmaSize: the Yaskawa servomotor sizing software, available at no charge.
More informationAV-300i Specifications. Saftronics Inc. PC10 Product Specifications PC10. Mini Vector AC Drive
Saftronics Inc. www.saftronics.com TM AV-300i Specifications PC10 Product Specifications PC10 Mini Vector AC Drive 1 (1) T hree-phas e 230V input Drive Hp 1/8 1/4 1/2 1 2 3 5 7.5 10 Nominal applicable
More informationUSER S MANUAL For Use with Large-Capacity Models Design and Maintenance
AC Servo Drives -V Series USER S MANUAL For Use with Large-Capacity Models Design and Maintenance Rotational Motor Command Option Attachable Type SGDV- H, - J SERVOPACK SGDV-COA Converter SGMVV Servomotor
More informationServo Motor Driver. 4. Specifications: Digital Driver Model ACS806. Digital Technology, max. 80 V DC / 6.0 A, W. 1. Product Description:
Digital Driver Model ACS806 Digital Technology, max. 80 V DC / 6.0 A, 50 400 W 1. Product Description: Leadshine's fully digital AC servo drive ACS806 is developed with 32-bit DSP based on advanced control
More informationES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder)
ES86 Series Closed-loop Stepper Drive + Motor System (ES-D808 Drive+ Motor/Encoder) Traditional stepper motor drive systems operate open loop providing position control without feedback. However, because
More informationSpecifications of ASDA A2-E_220V Series
Specifications of ASDA A2-E_220V Series Power Supply 100W 200W 400W 750W 1kW 1.5kW 2kW 3kW ASDA A2-E Series 01 02 04 07 10 15 20 30 Phase / Voltage Three-phase / Single-phase 220VAC Three-phase 220VAC
More informationSX (400V) System configuration
~ ~ SX (400V) High performance Vector Control IP54 full range. Compact design & Robustness Built-in Filter according to C3 Class Built-in Fusses (From 200 kw) Safety according EN13849-1 and EN62061 standards
More informationΣ-II Series SGDH PROFIBUS-DP APPLICATION MODULE USER'S MANUAL MODEL: JUSP-NS500 JUSP-NS500-E MANUAL NO. SIE-C718-8C
Σ-II Series SGDH PROFIBUS-DP APPLICATION MODULE USER'S MANUAL MODEL: USP-NS500 USP-NS500-E MANUAL NO. SIE-C718-8C Copyright 2001 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication
More informationAC Servo Motor Driver (MECHATROLINK-II type)
LEC-OM07304 (Doc No. JXC -OMT0068) (Simplified edition) PRODUCT NAME AC Servo Motor Driver (MECHATROLINK-II type) MODEL / Series / Product Number LECYM Series Contents Introduction... 6 1. Procedure before
More informationLogosol AC Intelligent Servo Drive LS-182P for Panasonic A and S series motors
DESCRIPTION LS-182P is a version of LS-182, designed to work with Panasonic A or S series motors. For all standard features and parameters please refer to LS-182 manual. OREDERING GUIDE PART NUMBER MODEL
More informationUSER S MANUAL. OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw)
USER S MANUAL OMNUC U SERIES MODELS R88M-U (AC Servo Motors) MODELS R88D-UT (AC Servo Drivers) AC SERVO MOTORS/DRIVERS (1 to 5 kw) Thank you for choosing this OMNUC U-series product. Proper use and handling
More informationDS2 series servo drive
DS2 series servo drive User manual WUXI XINJE ELECTRIC CO., LTD. Serial No. SC2 00 20160526 1.0 All copyrights reserved by WUXI XINJE ELECTRIC CO., LTD. Any copying, transferring or any other usage is
More informationPersonal computer software: CX-One. G-Series ML2 Servo drive. G-Series ML2 Servo drive ADR 1 1 ADR X X1 2 3 X X10 COM
AC SERVO D RIVER 7 AC SERVO D R IVER 7 AC SERVO D R IVER 7 AC SERVO D RIVER 7 AC SERVO D RIVER 7 RD-N@, RD-T@ -Series servo drive A compact servo drive family for motion control. Compact size and integrated
More informationCat. No. I553-E1-01. Servomotors/Servo Drivers MODELS (Servomotors) (Servo Drivers) SMARTSTEP Junior USER S MANUAL
Cat. No. I553-E1-01 Servomotors/Servo Drivers MODELS R7M-Z@ (Servomotors) R7D-ZP@ (Servo Drivers) SMARTSTEP Junior USER S MANUAL Thank you for choosing this SMARTSTEP Junior product. This manual provides
More informationDrive Safety integrated AC servo amplifier <MR-J3- S 0.1kW to 55kW> Safety logic unit <MR-J3-D05>
General-Purpose AC Servo MELSERVO-J3 Drive Safety integrated AC servo amplifier Safety logic unit The MR-J3- S Drive Safety integrated AC servo amplifier (SSCNET Ⅲ
More informationProposing control by a hydraulic servo and V/F inverters
Drive Goods SSCNET III/H Analog Speed Command Unit (Number of Control Axes: Axes) [DGAF/DGAF-P0] New Product Release No. Proposing control by a hydraulic servo and V/F inverters using a SSCNET III/H compatible
More informationInstallation Servo Drive Dimensions
Installation Servo Drive Dimensions A B Model R88D WTA3H WTA5H A 55 160 130 50 8 149 75 5 0.8 4 1.25 WT01H WT02H WT04H A 75 160 130 63 8 149.5 75 5 1.1 8 2 WT08HH A 90 160 180 63 8 149.5 75 5 1.7 11 2
More informationVFD - D700 Series Specifications. The latest low-cost variable speed control solution for centrifugal pumps.
VFD - D700 Series Specifications The latest low-cost variable speed control solution for centrifugal pumps. Built-in PID Control to maintain pressure, flow, measured value, and much more 125% overload
More informationAPPLICATION MODULE USER'S MANUAL
Σ-II Series SGDH DeviceNet APPLICATION MODULE USER'S MANUAL MODEL: USP-NS300 USP-NS300-E MANUAL NO. SIE-C718-6E Copyright 2000 YASKAWA ELECTRIC CORPORATION All rights reserved. No part of this publication
More informationΣ-mini. Σ-mini Series INSTRUCTIONS. AC Servo Drive Conforming to EN Standard SGMM SGDF. SGMM Servomotors SGDF SERVOPACK
AC Σ-mini SGMM SGDF AC Servo Drive Conforming to EN Standard Σ-mini Series INSTRUCTIONS SGMM Servomotors SGDF SERVOPACK To properly use the product, read this manual thoroughly and retain for easy reference,
More informationCopyright 2009 YASKAWA ELECTRIC CORPORATION
AC Servo Drives Σ-V Series USER'S MANUAL EtherCAT (CoE) Network Module Model: SGDV-OCA01A Checking Products Specifications SERVOPACK Installation Wiring and Connection Operation EtherCAT Communication
More informationCable lead-out. Standard. Rear lead-out (Connecter used in models 58 and 65) Variation. Side lead-out is available. (Models 25, 32, and 40) Option
SHA Series The SHA series comprises AC servo actuators that integrate a thin speed reducer HarmonicDrive for precision control and a super flat AC servo motor. The SHA series features an unmatched compact
More information