Series S Single Output to 660 Vac AC/DC Control
|
|
- Mervyn Morton
- 5 years ago
- Views:
Transcription
1 Part No. Load Voltage Load Current Control Voltage Switch Type SD Vrms A Vdc Zero Cross SDM Vrms A Vdc Zero Cross SR Vrms A 3 Vdc Random SD Vrms A Vdc Zero Cross SA Vrms A 9 Vac/Vdc Zero Cross SD Vrms A Vdc Zero Cross SR Vrms A Vdc Random SD Vrms A Vdc Zero Cross SA Vrms A 9 Vac/Vdc Zero Cross SA- Vrms A 7 Vac/Vdc Zero Cross SR7 Vrms 7A 9 Vac/Vdc Zero Cross SR- Vrms A 7 Vac/Vdc Zero Cross Part Number Example: SA- NOTES ) Line Voltage (nominal): = Vac; = Vac; = Vac ) Switch Type: R = Random turn-on; D = Zero-cross turn-on; A = AC control, Zero-cross turn-on 3) Feature: - = Low Vac control. Available on A type models SR Vrms A Vdc Random SA Vrms A 9 Vac/Vdc Zero Cross SD Vrms A 7 Vdc Zero Cross. (7) (.) (.).9 (.).77 (9.). (.) MECHANICAL SPECIFICATION.9 (.) TOLERANCES:. (.3) Ø.9 (Ø.7).7 (3.). (7.). () ~ ~ - 3+ (.) M.7 (7.).7 (.) M3 WEIGHT: 3. oz. (9g) Figure S relays, 9 A; dimensions in inches (mm) A model uses larger M output screw terminals - Control TYPICAL APPLICATION Line Protection Line Voltage. (.) FEATURES/BENEFITS Industry standard package Internal snubber (except S models) Designed for all types of loads AC or DC control available Excellent thermal performance Tight zero-cross window for low EMI High immunity to surges DESCRIPTION The single-phase relays are designed for all types of loads. The design incorporates an SCR or triac output. The relays utilize optical isolation to protect the control from load transients. All contain an internal snubber for output protection. High-current models are excellent for motor and phase angle control. APPLICATIONS Heating control Motor control Uninterruptible power supplies Light dimmers Industrial and process control On/Off controls of AC equipment APPROVALS S and S models are UL recognized. UL File Number: E * - can be changed * SSR must be mounted on a heat sink Figure S relays LOAD For RoHS Compliant Contact Factory TELEDYNE RELAYS () S Page S\\Q3
2 Single Output to A Vac INPUT (CONTROL) SPECIFICATION Control Range S R 3 Vdc D Vdc S R Vdc D Vdc S D Vdc SxxA A 9 Vac/Vdc Sxxxxx- A 7 Vac/Vdc Input Current Range S R/D 3 ma S A 3 ma Sxxxxx- A. ma CONTROL CHARACTERISTICS Figure 3b SD/R relays Must Turn-Off Voltage S R/D Vdc S A Vac S A Vac Sxxxxx- 3 Vac Input Resistance (Typical) S R/D Ohms S A, Ohms Sxxxxx- Ohms Reverse Voltage Protection S R/D V S A NA CONTROL CHARACTERISTICS Figure 3a SR, SD and SD relays Figure 3c SA and SA relays 7 Figure 3d Sxxxxx- relays S Page SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TELEDYNE RELAYS S\\Q3
3 OUTPUT (LOAD) SPECIFICATION Operating Range S Vrms S Vrms S Vrms Peak Voltage S Vpeak S Vpeak S Vpeak Load Current Range (Resistive) A output current. Arms A output current. Arms A output current. Arms A output current. Arms A output current. Arms Inductive Load Current A output current. Arms A output current Arms A output current 9 Arms A output current Arms A output current Arms Capacitive Load Current SD Arms OUTPUT (LOAD) SPECIFICATION (continued) On-State Voltage Drop A output current.3 V A output current. V A output current. V A output current. V A output current.3 V SD. V Zero-Cross Window (Typical) S R NA V S D/A ± Vac Off-State Leakage Current (Hz) S 3 ma S D/A 3 ma S R. ma S A ma Turn-On Time (Hz) S R. ms S D.3 ms S A.9 ms Turn-Off Time (Hz) S R/D.3 ms S A.9 ms Maximum Surge Current Rating () A output current A S, A output current A S, A output current A A output current 3 A A output current A A output current A Off-State dv/dt V/ųs Maximum di/dt (Non-repetitive) A/ųs TELEDYNE RELAYS () S Page 3 S\\Q3
4 Single Output to A Vac OUTPUT (LOAD) SPECIFICATION (continued) Operating Frequency. Hz SURGE CURRENT I²T for match fusing (<.3ms) A output current 7 A²S SR 3 A²S SD/SA A output current A²S S A output current A²S A output current A²S A output current A²S A output current A²S. Repetitive with initial Tj = 7 C. Figure a A output current ENVIRONMENTAL SPECIFICATION Operating Temperature - C SD - C Storage Temperature - + C Input-Output Isolation Vrms Output-Case Isolation A output current Vrms A output current Vrms A output current,r Vrms A output current,d 3 Vrms A output current,a 3 Vrms A output current 3 Vrms A output current 3 Vrms.. Repetitive with initial Tj = 7 C. Figure b A output current Repetitive with initial Tj = 7 C. Figure c A output current Repetitive with initial Tj = 7 C. Figure d A output current. Repetitive with initial Tj = 7 C. Figure g A output current S Page SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE TELEDYNE RELAYS S\\Q3
5 THERMAL CHARACTERISTICS % duty cycle C/W C/W. C/W. C/W. C /W % duty cycle. C/W.7 C/ W.9 C/W. C /W. C /W.3 C/W C/W Figure a A output current 7 9 C/W 7 9 Figure e A output current.9 C/W 7 3. C /W % duty cycle. C /W. C/W C/ W C/W NOTES:. Electrical specifications measured at C unless otherwise specified.. For Hz applications, contact factory. 3. For additional/custom options, contact factory. Figure b A output current OPTIONAL ADD-ONS Please order add-ons separately: - Thermal pad installed. - Plastic touch-proof cover..9 C/ W. C/W.7 C/W. C/W % duty cycle. C/W. C/W 9 9 C /W Figure c A output current 9.7 C/W. C/W.3 C/W C /W 7 % duty cycle. C/W. C/W. C/W 9 9 C/W Figure d A output current TELEDYNE RELAYS () S Page S\\Q3
NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
More information3.6. Control Relays and Timers D A M D 2. Contents. Product Overview. Catalog Number Selection. Solid-State Relays
.6 Control Relays and Timers Product Overview Catalog Number Selection D9, D96 and D99 Series Description D9 = Hockey puck D96 = Compact D99 = DIN rail Contents D 9 2 5 A M D 2 Output Voltage 1 = 2 60
More informationPCB MOUNT SOLID STATE RELAY ESR2 SERIES
PCB MOUNT SOLID STATE RELAY ESR2 SERIES E155181(R) FEATURES PCB Mount; Single in Line Package. Optically Isolated. Input LED Indicator. High dv/dt and High Blocking Voltage. Low Input Power Consumption,
More information3 Input (+) & 4 Input (-) 1 & 2 Output
Product Catalogue DC SSR 02 ~ 40 Amps INPUT OUTPUT : DC Control, : Darlington/MOSFET Input Series : 001 K 3 Input (+) & 4 Input (-) 1 & 2 A = 3.2 C/W C = 0.5 C/W For Heatsink details refer to Recommended
More informationAdvantages of the 70S2 Series
Advantages of the 70S2 Series SECTION Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed
More informationFood Preparation Equipment Plastic Molding Lighting Control Dual Solid State Relays SEN Produkte, Support und Service TRONICAG
THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY Food Preparation Equipment Plastic Molding Lighting Control rydom has a distinguished record of providing advanced, high quality products with timely delivery
More informationAdvantages of the 70S2 Series
Advantages of the 70S2 Series Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed for medium-power
More informationSOLID-STATE RELAYS. DATA SHEET page 1/13. Overview
DATA SHEET page 1/13 Overview In 1974, Opto 22 introduced the first liquid epoxy-filled line of power solid-state relays (SSR). This innovation in SSR design greatly improved the reliability and reduced
More informationLDR3 Outline Dimensions. Dimension Inches Millimeters
OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated
More informationSeries HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay
Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with
More informationPS2401 AC Power Switch
AC Power Switch Units AC Operating Voltage V RMS Load Current 1 A On-State V RMS Voltage Drop 1.2 (A T I L = IA) Description is an AC Solid State Switch utilizing dual power SCR outputs. This device also
More informationMAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
More informationSOLID STATE RELAY RATINGS
Solid State Relays SOLID STATE RELAY RATINGS PART NUMBER HPR48A25 HPR48A50 HPR48A75 3PSS60A75 HPR48D25 HPR48D50 HPR48D75 Rated operational current AC51 @ Ta=25 C 25 AMPS rms 50 AMPS rms 75 AMPS rms 75
More informationLegacy Schneider Electric Solid-State Relays. Catalog
Legacy Schneider Electric Solid-State Relays Catalog 2017 Contents Series Overview....................................................3 861 Relays........................................................4
More informationPower-IO
E Family of Solid State Relays Up to 900 VDC switched 12-20 khz, FAST switching times for superior PWM performance Ultra Cool Technology trademarked thermal management design Green LED that indicates input
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationPole "Common" Jumper 10 postion jumper - Red
SIMM Series Input Modules * 6. mm wide and 6 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP0 s 06 06 06
More informationAnacon Power & Controls
2254 Main Street, Concord, MA 01742-3829 Tel: 800-466-9080 978-287-0715 Fax: 978-287-0952 www.anaconpower.com sales@anaconusa.com SCR Power Controllers Zero Cross Time Based / Burst Fire C - SCR (Burst)
More information7PIN DIP PHOTO POWER TRIAC PHOTOCOUPLER ELRX223 Series
Features Low trigger current T 10mA Peak off state voltage 600V Load current 0.3,0.6,0.9,1.2A Wide operating temperature range of -40 C to 85 C High isolation voltage between input and output (Viso=5000
More informationCPC40055ST. AC Power Switch INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features. Ordering Information.
AC Power Switch Characteristics Parameter Rating Units AC Operating 2-28 V AC (V rms Load With C/W Heat Sink 2 No Heat Sink Features Load up to 2A rms with C/W Heat Sink 8V P Blocking Creepage Pin 1 to
More informationMAC16DG, MAC16MG, MAC16NG
MAC6DG, MAC6MG, MAC6NG Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800
More informationSECTION 2 SOLID STATE RELAYS (SSR) 2.5 TO 125 AMPERES
Your Contact for Relays SECTION 2 SOLID STATE RELAYS (SSR) 2.5 TO 125 AMPERES SSRDIN 6 (AS) SOLID STATE RELAYS 6 (DS) RELAY SERIES L.E.D. STATUS LAMP L.E.D. STATUS LAMP L.E.D. STATUS LAMP FEATURES L W
More informationTO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
More informationMagnecraft Solid State Relays
Magnecraft Solid State Relays Catalog 2010 Contents Series Overview....................................................3 861 Relays........................................................4 861H Relays......................................................7
More informationTO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT
TO-5 RELAYS ESTABLISHED RELIABILITY MILITARY DPDT SERIES RELAY TYPE DPDT basic relay D DPDT relay with internal diode for coil transient suppression DD DPDT relay with polarity reversal protection and
More informationPS1201 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 12 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
More information6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK)
-PIN DIP RANDOM-PHASE PACKAGE SCHEMATIC ANODE MAIN TERM. CATHODE NC* N/C 3 MAIN TERM. *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The MOC30XM and MOC30XM series are optically isolated triac driver devices.
More informationSeries CD. 2A, 60Vdc Optically Isolated, Short-Circuit Protected DC Solid-State Relay ELECTRICAL SPECIFICATIONS
2A, 60Vdc Optically Isolated, Short-Circuit Protected DC Solid-State Relay Part* DESC Drawing Relay Description Number Number CD00CFW Basic Solid-State Relay (SSR) CD00CFY 90091-008 CD01CFW SSR with Control
More informationMAC8DG, MAC8MG, MAC8NG
MAC8DG, MAC8MG, MAC8NG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
More informationSolid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
More informationThe SSR P Series. Phase-Fired SCR Power Controllers. for resistive heating loads. Phase-Fired SCR Power Controllers AMPS VAC
The SSR P Series Phase-Fired SCR Power Controllers 15-70 AMPS 80-600 VAC Phase-Fired SCR Power Controllers for resistive heating loads. ROBICON 1996 Rev. 12/96 Applications The SSR P series models are
More informationMTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
More informationSolid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long
More information77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
More informationMillenium II + Standard. Specifications. Dimensions. General characteristics
Millenium II + Standard Intuitive programming via function block (FBD) or grafcet (SFC) Function : timing, counting, etc Application-specific functions : rotation, cam timers, calculation, etc Discrete,
More information6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVERS (600 VOLT PEAK)
PACKAGE SCHEMATIC 6 6 ANODE CATHODE 2 6 MAIN TERM. 5 NC* N/C 3 4 MAIN TERM. 6 *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The and consist of a AlGaAs infrared emitting diode optically coupled to a non-zero-crossing
More information6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK)
-PIN DIP ZERO-CROSS DESCRIPTION The MOC303XM and MOC304XM devices consist of a AlGaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage
More informationMAC228A. Thyristors. Surface Mount 400V - 800V > MAC228A. Description
MAC228A Pb Description Designed primarily for industrial and consumer applications for full wave control of AC loads such as appliance controls, heater controls, motor controls, and other power switching
More informationTCS4 340H Phase Control Thyristor
TCS4 340H The TCS4 is a high voltage, high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various
More informationDescription. 575Di MP120D2 or P120D2 MP120D4 or P120D4. or P240D2. MP240D4 or P240D4
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More informationS110-XHS. Description. Features. Agency Approvals. Applications. Absolute Maximum Ratings. Schematic Diagram. Ordering Information
Description Features The S110-X is a bi-directional, single-pole, single-throw, normally open multipurpose solid-state relay. The circuit is composed of one input IR LED with a series limiting resistor
More informationApplications: WEIGHT: grams (typical)
RADIATION TOLERANT VDC A POWER MOSFET OPTOCOUPLER Mii Features: This Design Tested to krad (Si) Total Dose Hermetically Sealed in Surface Mount Package Low On-resistance A Continuous Output Current Performance
More informationCPC1964B AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage - 28 V rms Load Current 1. A rms On-State Voltage Drop 1.4 V P (at = 1.A P Blocking Voltage 8 V P Features Load Current up to 1.A rms 8V P Blocking
More informationSemiconductor Device Solid state relays
- GT 0 to 40 Amps AC SSR The series GT three phase Solid State Relays is used three phase loads. Triac Output. The triac version of the zero switching relay is an inexpensive solution for resistive loads.
More informationHFI50N06A / HFW50N06A 60V N-Channel MOSFET
HFI50N06A / HFW50N06A 60V N-Channel MOSFET Features Superior Avalanche Rugged Technology Robust Gate Oxide Technology Very Low Intrinsic Capacitances Excellent Switching Characteristics 100% Avalanche
More informationT Phase Control Thyristor
The T820 is a high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various phase control applications.
More information6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT (800 VOLT PEAK)
PACKAGE SCHEMATIC ANODE 1 6 MAIN TERM. CATHODE 2 5 NC* N/C 3 ZERO CROSSING CIRCUIT 4 MAIN TERM. *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The MOC3081M, MOC3082M and MOC3083M devices consist of a GaAs
More informationCPC1966B AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 2-24 V rms Load Current 3 A rms On-State Voltage Drop.8 V rms (at = 3A rms Blocking Voltage 8 V P Features Load Current up to 3A rms 8V P Blocking
More informationSP Form A Solid State Relay DESCRIPTION ABSOLUTE MAXIMUM RATINGS* OPTIONS/SUFFIXES* SCHEMATIC DIAGRAM APPROVALS PARAMETER UNIT MIN TYP MAX
DESCRIPTION The is a bi-directional, single-pole, single-throw, normally open multipurpose relay. The circuit is composed of one LED on the input side which activates an optically coupled IC on the output
More informationcelduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use Single-Phase Relay: Phase angle ler Transfer characterisic :Angle open loop Operating voltage
More informationTMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.
TMT Series, 10 to 50 Watt Features Ultra compact, fully encapsulated plastic case Single-, dual- and triple output models 2 package styles: - with screw terminal block for chassis mount - with solder pins
More informationApplication Note Vishay Semiconductors
FAQ of Phototriacs 11/10/2008 Application Note 1. What is static dv/dt?... 1 2. What are commutating dv/dt and commutating di/dt?... 1 3. Trigger current 2 (I FT2 ) of IL410... 2 4. Direct Driven Load
More informationCPC1976Y. AC Power Switch INTEGRATED CIRCUITS DIVISION. Description. Features. Approvals. Ordering Information. Applications.
AC Power Switch Parameter Rating Units AC Operating Voltage 2-24 V rms Load Current 2 A rms On-State Voltage Drop. V rms (at I L = 2A rms ) Blocking Voltage 6 V P Features Load Current up to 2A rms 6V
More informationTeccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
More informationSolid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,
More informationBTA25-600CW3G, BTA25-800CW3G
BTA25-600CW3G, BTA25-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage
More informationHIGH REPEATABILITY, DC-8 GHz/20Gbps TO-5 RELAYS, DPDT
HIGH REPEATABILITY, DC-8 GHz/Gbps TO-5 RELAYS, DPDT SERIES RELAY TYPE RF3 RF33 Repeatable, RF relay Low Power Operating Coil, RF relay DESCRIPTION The ultra miniature RF3 is designed to improve upon the
More informationSilicon Bidirectional Thyristors
Preferred Device Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Blocking Voltage to
More informationThese medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationT9G Phase Control Thyristor
The T9G0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
More informationHCD80R1K4E 800V N-Channel Super Junction MOSFET
HCD80R1K4E 800V N-Channel Super Junction MOSFET Features Very Low FOM (R DS(on) X Q g ) Extremely low switching loss Excellent stability and uniformity 100% Avalanche Tested Application Switch Mode Power
More informationApplication Note AN-3006 Optically Isolated Phase Controlling Circuit Solution
www.fairchildsemi.com Application Note AN-3006 Optically Isolated Phase Controlling Circuit Solution Introduction Optocouplers simplify logic isolation from the ac line, power supply transformations, and
More informationDFP50N06. N-Channel MOSFET
N-Channel MOSFET Features R DS(on) (Max.22 )@ =1V Gate Charge (Typical 36nC) Improved dv/dt Capability High ruggedness 1% Avalanche Tested 1.Gate 2.Drain 3.Source BS = 6V R DS(ON) =.22 ohm = 5A General
More informationHCD80R650E 800V N-Channel Super Junction MOSFET
HCD80R650E 800V N-Channel Super Junction MOSFET Features Very Low FOM (R DS(on) X Q g ) Extremely low switching loss Excellent stability and uniformity 100% Avalanche Tested Application Switch Mode Power
More informationCPC1966 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage - 24 V rms Load Current 3 A rms On-State Voltage Drop.8 V rms (at = 3A rms Blocking Voltage 6 V P Features Load Current up to 3A rms 6V P Blocking
More informationThese power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
More informationDescription 575D30-HS. 575Di MP120D2 or P120D2 MP120D4 or P120D4 MP240D2 or P240D2 MP240D4 or P240D4. DC60P or DC60MP DC200P or DC200MP
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
More information6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series
6 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER EL301X, EL302X, EL305X Series Schematic 1 6 2 5 Features: Peak breakdown voltage - 250V: EL301X - 400V: EL302X - 600V: EL305X High isolation voltage between
More informationMOC3031M MOC3032M MOC3033M MOC3041M MOC3042M MOC3043M. Parameters Symbol Device Value Units TOTAL DEVICE Storage Temperature. T STG All -40 to +150 C
-PIN DIP ZERO-CROSS DESCRIPTION The MOC303XM and MOC304XM devices consist of a AlGaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage
More informationSeries 7 Power Controllers
Series 7 DIN Rail Mount Power Devices Series 7 Power Devices put 12 to 80 Amps in a DIN rail mount package that provides precision machine control for heater bands, cartridge heaters, and other resistive
More informationCPC1966YX6 Rapid Turn-On AC Power Switch
Rapid Turn-On AC Power Switch Parameter Rating Units AC Operating Voltage - 24 V rms Load Current 3 A rms On-State Voltage Drop 1.1 V P (at = 2A P Blocking Voltage 6 V P Features Load Current up to 3A
More informationMAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description
MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate
More informationCENTIGRID ESTABLISHED RELIABILITY RELAYS
SERIES DESIGNATION CENTIGRID ESTABLISHED RELIABILITY RELAYS SENSITIVE DPDT 134 DPDT basic relay 134D 134DD RELAY TYPE DPDT relay with internal diode for coil transient suppression DPDT relay with internal
More informationHIGH REPEATABILITY, TO-5 RELAYS DPDT
HIGH REPEATABILITY, TO-5 RELAYS DPDT SERIES RELAY TYPE RF7 RF7 Repeatable, RF relay Sensitive, repeatable, RF relay DESCRIPTION The ultraminiature RF7 and RF7 relays are designed to provide improved RF
More informationKTLP3616 (3506) Series 8PIN RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER
Description The KTLP3616 series consist of a GaAs infrared emitting diode optically coupled to an non-zero-crossing silicon bilateral TRIAC and a main output power TRIAC. These devices isolate low voltage
More informationDescription. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
More informationSlim type SSR for 1 A and 2 A control AQ-G RELAYS
VDE Slim type SSR for 1 A and A control AQ-G RELAYS ORDERING INFORMATION current 1: 1 A : A RoHS compliant voltage : 75 to 6 Vrms 1: Zero-cross (3, V) : Random (3, V) Control voltage 5: to 6 V DC 1: 9.6
More information7SD/7SH/7SM Temperature Controllers
7SD/7SH/7SM Temperature ADVANTAGE EZ Series 7SD, 7SH, 7SM 1/16 DIN Temperature 3Digit LED Display Thermocouple and RTD Input Autotuning NEMA 4X Field onfigurable 100 to 40 Vac Switching Power Supply Programmable
More informationLedex Drive Electronics and Coil Suppressors
Ledex and Coil Suppressors Ledex Coil Suppressors A voltage is generated by a changing magnetic field in proximity to a current-carrying member. The equation E = -N dø /dt, describes this by saying that
More informationKTLP3616 (3506), (3502) Series 8PIN RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER
Description The KTLP3502 series consist of a GaAs infrared emitting diode optically coupled to an non-zero-crossing silicon bilateral TRIAC and a main output power TRIAC. These devices isolate low voltage
More informationCPC1965G AC Solid State Relay
AC Solid State Relay Parameter Rating Units AC Operating Voltage 26 V rms Load Current 1 A rms On State Voltage Drop 1.6 V rms (at I L = 1A rms Features Load Current up to 1A rms 6V P Blocking Voltage
More informationNLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More information(250 Volts Peak) COUPLER SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit STYLE 6 PLASTIC
(0 Volts Peak) The Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are designed for applications requiring isolated triac triggering, low
More informationSELECTION GUIDE. BULLETIN 156 Solid-State Contactors
SELECTION GUIDE BULLETIN 156 Product Overview/Product Selection Bulletin 156 The Bulletin 156 are ideal replacements for electro-mechanical contactors where fast and demanding switching of loads such
More information4 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER ELT302X, ELT305X Series
4 PIN DIP RANDOM-PHASE TRIAC DRIVER PHOTOCOUPLER ELT302X, ELT305X Series Schematic Features: Peak breakdown voltage - 400V: ELT302X - 600V: ELT305X High isolation voltage between input and output (Viso=5000
More informationT9S0 Phase Control Thyristor
The T9S0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
More informationBTA16-600BW3G, BTA16-800BW3G,
BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
More informationBTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description
BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State
More informationMC4DCM, MAC4DCN. Thyristors. Surface Mount 600V - 800V > MC4DCM, MAC4DCN. Description
MCDCM, MACDCN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size Surface
More informationMCR8DSM, MCR8DSN. Thyristors. Surface Mount 600V - 800V > MCR8DSM, MCR8DSN G K. Description
MCR8DSM, MCR8DSN Pb Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control. Features Small Size
More informationBTA40 and BTA/BTB41 Series
STANDARD 4A TRIACS MAIN FEATURES: Symbol Value Unit I T(RMS) 4 A G V DRM /V RRM 6 and 8 V A1 A1 I GT (Q1 ) 5 ma G DESCRIPTION Available in high power packages, the BTA/ BTB4-41 series is suitable for general
More informationTYPICAL PERFORMANCE CURVES = 25 C = 110 C = 175 C. Watts T J. = 4mA) = 0V, I C. = 3.2mA, T j = 25 C) = 25 C) = 200A, T j = 15V, I C = 125 C) = 25 C)
TYPICAL PERFORMANCE CURVES 6V APT2GN6J APT2GN6J Utilizing the latest Field Stop and Trench Gate technologies, these IGBT's have ultra low (ON) and are ideal for low frequency applications that require
More informationLJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationElectrical Specifications
450 Watt Medical Features 4 x 6.5 x 1.61 inches Approval to EN60601 3rd Edition Dual Fusing Current Sharing Option Cover and Fan Options Peak Power Capability Class B EMI & Medical (BF) Safety Approvals
More informationLJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
More informationCPC1972 AC Power Switch
AC Power Switch Parameter Ratings Units Blocking Voltage 8 V P Load Current 2 ma rms On State Voltage Drop 3 V rms (at I L = 2 ma rms Operating Voltage V rms Features Load Current up to 2mA rms 8V P Blocking
More informationOutput Full Load
SERIES DC-DC CONVERTER 2:1 & 4:1 WIDE INPUT RANGE UP TO 3.3 WATTS FEATURES REINFORCED INSULATION FOR 2VAC WORKING VOLTAGE CLEARANCE AND CREEPAGE DISTANCE :8.0mm/2MOPP 00VAC INPUT TO OUTPUT 2MOPP ISOLATION
More informationElectrical Specifications
Series 0 Watts C-Class Non-Isolated SXX06E Rev. 08.0.06 Page of 2 of Total Power: 0 Watts Input Voltage: 3-3.8 Vdc No. of s: Single Special Features 0 A current rating Adjustable output voltage: 0.9 -.
More information