SOLID STATE RELAY RATINGS
|
|
|
- Gertrude Glenn
- 5 years ago
- Views:
Transcription
1 Solid State Relays SOLID STATE RELAY RATINGS PART NUMBER HPR48A25 HPR48A50 HPR48A75 3PSS60A75 HPR48D25 HPR48D50 HPR48D75 Rated operational current Ta=25 C 25 AMPS rms 50 AMPS rms 75 AMPS rms 75 AMPS rms Ta=25 C 5 AMPS rms 15 AMPS rms 20 AMPS rms 20 AMPS rms Minimum operational current 150 ma rms 250 ma rms 400 ma rms 400 ma rms Rep. overload current t = 1 s < 55 A rms < 125 A rms < 150 A rms < 150 A rms Non-rep. surge current t = 10 ms 325 Ap 600 Ap 1150 Ap 1150 Ap Off-state leakage current < 3 ma rms < 3 ma rms <3 ma rms <3 ma rms I 2 t for fusing t = 10 ms 525 A2s 1800 A2s 6600 A2s 6600 A2s On-state voltage drop 1.6 V rms 1.6 V rms 1.6 V rms 1.6 V rms Critical dv/dt off-state 1000 V/µs 1000 V/µs 1000 V/µs 500 V/µs PART NUMBER SS20AU SS30AU SS50AU SS70AU SS20DU SS30DU SS50DU SS70DU Rated operational current Ta=25 C 20 AMPS rms 30 AMPS rms 50 AMPS rms 70 AMPS rms Ta=25 C 5 AMPS rms 15 AMPS rms 30 AMPS rms 30 AMPS rms Minimum operational current 350 ma rms 150 ma rms 150 ma rms 150 ma rms Rep. overload current t = 1 s < 35 A rms < 125 A rms < 200 A rms < 200 A rms Non-rep. surge current t = 10 ms 250 Ap 400 Ap 1900 Ap 1900 Ap Off-state leakage current <3 ma rms <3 ma rms <3 ma rms <3 ma rms I 2 t for fusing t = 10 ms 310 A2s 1800 A2s 1800 A2s 1800 A2s On-state voltage drop 1.6 V rms 1.6 V rms 1.6 V rms 1.6 V rms Critical dv/dt off-state 500 V/µs 500 V/µs 500 V/µs 500 V/µs
2 Solid State Relays...continued Models: 3PSS60A75 S (Standard Din-rail) 3PSS60A75 R (Retro Fit) Industrial, 3-Phase SS 3-phase Solid State Relay Zero switching Rated operational current: 3 x 75 AMPS Rated operational voltage: 600 VAC Control voltage VDC/ VAC Integral snubber network Built-in varistor IP 10 back-of-hand protection LED indication of control input Heat Sink and 24 VDC Fan Included E General Specifications Operational voltage range VAC 45 to 65 Hz Blocking voltage 1600 Vp Over voltage category III Pollution degree 3 Operating temperature -30 to 80 C (-22 to 158 F) Storage temperature -40 to 100 C (-40 to 212 F) Input to ouput isolation voltage >4000 VAC rms Output to case isolation voltage >4000 VAC rms Heat Sink Fan requires VDC Markings Input Specifications Control voltage range VAC/24-50 VDC Pick-up voltage 18 VAC/20 VDC Drop-out voltage 9 VAC/DC Input current <15 ma Response time pick-up (Power output = 50 Hz) 20 ms Response time drop-out (Power output = 50 Hz) 30 ms All data specified at Ta=25 C A Solid State Relay family designed to switch various loads such as heating elements, motors and transformers. The relay is capable of switching voltages up to 600 VAC rms. The built-in varistor is for heavy industrial applications. For higher reliability and load cycle capability three semiconductor power units are bonded directly to the substrate. PART # DESCRIPTION PRICE EACH 3PSS60A75 S Standard Din-rail CALL 3PSS60A75 R Retro Fit CALL Tested and Approved 3 Pole C to 50 C 3-Phase 2 Pole C to 50 C 3-Phase* 51 C to 80 C 10 AMPS per decade *For 2 Pole usage, use L1 & L3
3 Solid State Relays...continued Type HPR48 Type HPR48 Zero switching Direct-Copper Bonding (DCB) Technology LED indication Built-in varistor 480 V Clip-on IP 20 protection cover Self-lifting terminals Housing free of moulding mass Blocking voltage: 1200Vp Opto-isolation: >4000 VAC rms 2 input ranges: 4-32 VDC and VAC/22-48 VDC E Operational ratings: Up to 75 AMPS rms Rated voltage: 480 VAC rms The industrial, 1-phase relay with anti-parallel thyristor output is the most widely used industrial SSR due to its multiple application possibilities. The relay can be used for resistive, inductive and capacitive loads. The zero switching relay switches ON when the sinusoidal curve crosses zero and switches OFF when the current crosses zero. The instant-on relay with DC control input can be used for phase control. The built-in varistor secures transient protection for the heavy industrial applications, and the LED indicates the status of the control input. The clip-on cover is securing touch protection to IP 20. Protected output terminals can handle cables up to 16mm 2 (6 AWG). PART # DESCRIPTION PRICE EACH HPR48A25 25 Amp CALL HPR48D25 25 Amp CALL HPR48A50 50 Amp CALL HPR48D50 50 Amp CALL HPR48A75 75 Amp CALL HPR48D75 75 Amp CALL HPR48A Amp CALL HPR48D Amp CALL Ordering Key HPR48 A 25 Solid State Relay Control voltage Rated operational current Type Selection Control voltage Rated operation current A: VAC/22-48 VDC 25: 25 AMPS rms D: 4-32 VDC 50: 50 AMPS rms 75: 75 AMPS rms General Specifications HPR48... Input Specifications HPR..D.. HPR..A.. Operational voltage range 42 to 530 VAC rms VAC Control voltage range 4-32 VDC Blocking voltage > 1200 Vp VDC Zero voltage turn-on < 10V Pick-up Ta = 25 C 3.5 VDC 18 VAC/DC Operational frequency range 45 to 65Hz Reverse voltage 32 VDC - Power Factor 480 VAC rms Drop-out voltage 1.2 VDC 6 VAC/DC Markings Input max voltage < 12 ma < 20 ma Response time pick-up < 1/2 cycle < 12 ms Response time drop-out < 1/2 cycle < 40 ms Thermal Specifications Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor HPR...25 HPR...50 HPR...75 Operating temperature range -20 TO 70 C (36 to 126 F) -20 TO 70 C (36 to 126 F) -20 TO 70 C (36 to 126 F) Storage temperature range -40 TO 100 C (72 to 180 F) -40 TO 100 C (72 to 180 F) -40 TO 100 C (72 to 180 F) Junction temperature < 125 C (225 F) < 125 C (225 F) < 125 C (225 F) Rth junction to case < 0.80K/W < 0.50K/W < 0.35K/W Rth junction to ambient < 20.0K/W < 20.0K/W < 20.0K/W
4 Solid State Relays...continued
5 ertrttsertrtsolid State Relays...continued applications requiring high cycle rates FEATURES: 20, 30, 50 and 70 AMP relays available Integrated Heat Sink AC Semiconductor Contactor Zero Switching Direct-Copper Bonding (DCB) Technology LED Indication Cage Clamp Teminals SPECIFICATIONS: 2 Input Ranges (4-32 VDC and VAC/24-48 VDC) Operational Ratings (20-70 AMPS AC 600 VAC) Non-repetitive Voltage: Up To 1200Vp OperatingTemperature: -30 to +80 C Junction Temperature: +125 C on 20, 30 & 70 AMP Junction Temperature: +120 C on 50 AMP Solid State Relays are advantageous in industrial heating applications requiring high cycle rates. These relays have integral heat sinks and are ready to mount on chassis or DIN-rail. Standard housing dimensions enable straight-forward replacement of alternative products and allow for two standard terminal configurations. Cage clamp terminals are used to ensure secure load connection. An LED indicates the status of the control input. Superior heat-transfer efficiency, combined with a robust power management system, makes this a highly reliable electrical relay capable of meeting even the most stringent functional requirements. PART # CURRENT VOLTAGE RATED CURRENT PRICE EACH SS20A_* VAC VDC 20 AMP SS20D_* 4-32 VDC 20 AMP SS30A_* VAC VDC 30 AMP SS30D_* 4-32 VDC 30 AMP SS50A_* VAC VDC 50 AMP SS50D_* 4-32 VDC 50 AMP SS70A_* VAC VDC 70 AMP SS70D_* 4-32 VDC 70 AMP*Ins"E"Foerminalsonlefide,Ins"U"FoerminalsonBo20, 30, 50 & 70 AMP Relays with Integrated Heatsinks BEST choice for industrial heating tomthe CALL FOR PRICING
6 Panel, Terminal Information & Derating Charts
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P AC semiconductor contactor Multi-function - 5 selectable modes of operation: Phase Angle, Distributed Full Cycle and Burst Control
3 Input (+) & 4 Input (-) 1 & 2 Output
Product Catalogue DC SSR 02 ~ 40 Amps INPUT OUTPUT : DC Control, : Darlington/MOSFET Input Series : 001 K 3 Input (+) & 4 Input (-) 1 & 2 A = 3.2 C/W C = 0.5 C/W For Heatsink details refer to Recommended
Solid State Relays Zero Switching Types Solid State Contactor
Solid State Relays Zero Switching Types Solid State Contactor Product Description This new range of solid state contactors presents an unique opportunity to maximize efficiency in panel space and is an
Semiconductor contactors, Solid-state relays
Semiconductor contactors, Solid-state relays Content Benefits and advantages... 338 Approvals and marks... 338 Semiconductor contactors... 339 Ordering details... 339 R100.xx, single-phase... 339 R300.xx,
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48
Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48 Zero switching AC Solid State Relay Direct copper bonding (DCB) technology in 25A and 40A types LED indication Clip-on IP 20 protection
Solid State Relays Industrial, 1Phase Peak Switching Type RM1C
Solid State Relays Industrial, 1Phase Peak Switching Type Ideal for switching of transformers and other highly inductive loads Direct copper bonding (DCB) technology Thyristor power units LED indication
Solid State Relay. Zero Switching Types RGC Solid State Contactor 'U' Connection. Product Description RGC 1 A 60 A 40 K G U _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 85AAC
Semiconductor contactors, Solid-state relays
Semiconductor contactors, Solid-state relays Content Benefits and advantages, approvals... 224 R100.xx semiconductor contactors, single-phase Ordering details... 225 Technical data... 228 Dimensional drawings...
RN Thyristor Controllers
Data Sheet RN Thyristor Controllers RN Thyristor Controllers Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive s, typically electric heating elements.they
77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long
Industrial, 2-Pole ZS Type RA2A
Solid State Relays Industrial, 2-Pole ZS Type 2-Pole AC Solid State Relay Zero switching For resistive and inductive AC loads Direct copper bonding (DCB) technology LED indication Rated operational current:
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
3.6. Control Relays and Timers D A M D 2. Contents. Product Overview. Catalog Number Selection. Solid-State Relays
.6 Control Relays and Timers Product Overview Catalog Number Selection D9, D96 and D99 Series Description D9 = Hockey puck D96 = Compact D99 = DIN rail Contents D 9 2 5 A M D 2 Output Voltage 1 = 2 60
NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor 'U' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage:
RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
1phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
Output of three-phase motors at 50 Hz and 400 V
RT0, RH Coupling Relays (Interfaces) Description DC operation IEC 0 947 and EN 0 947 (VDE 00) The RT0 coupling relays for switching motors and RH for auxiliary circuits are laid out to the special requirements
SOLID-STATE RELAYS. DATA SHEET page 1/13. Overview
DATA SHEET page 1/13 Overview In 1974, Opto 22 introduced the first liquid epoxy-filled line of power solid-state relays (SSR). This innovation in SSR design greatly improved the reliability and reduced
PCB MOUNT SOLID STATE RELAY ESR2 SERIES
PCB MOUNT SOLID STATE RELAY ESR2 SERIES E155181(R) FEATURES PCB Mount; Single in Line Package. Optically Isolated. Input LED Indicator. High dv/dt and High Blocking Voltage. Low Input Power Consumption,
Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
77 Modular Solid State Relay 5 A 77 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random
Solid State Relays 3-Phase with Integrated Heatsink Types 2 & 3 Pole
Solid State Relays 3Phase with Integrated Heatsink Types 2 & 3 Pole 2pole & 3pole AC switching solid state contactors Product width up to 2.84" (72 mm) Rated operational voltage: up to VAC Rated operational
The SSR P Series. Phase-Fired SCR Power Controllers. for resistive heating loads. Phase-Fired SCR Power Controllers AMPS VAC
The SSR P Series Phase-Fired SCR Power Controllers 15-70 AMPS 80-600 VAC Phase-Fired SCR Power Controllers for resistive heating loads. ROBICON 1996 Rev. 12/96 Applications The SSR P series models are
SELECTION GUIDE. BULLETIN 156 Solid-State Contactors
SELECTION GUIDE BULLETIN 156 Product Overview/Product Selection Bulletin 156 The Bulletin 156 are ideal replacements for electro-mechanical contactors where fast and demanding switching of loads such
38 Series - Relay Interface Modules A
Series - Relay Interface Modules 0.1-2 - 6 A - Relay interface modules for use with PLC systems, mm wide - Sensitive DC coil or AC/DC coil version - Supplied with integral coil - Instant removal of relay
celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use Single-Phase Relay: Phase angle ler Transfer characterisic :Angle open loop Operating voltage
Pole "Common" Jumper 10 postion jumper - Red
SIMM Series Input Modules * 6. mm wide and 6 mm deep * DIN Rail mounted * LED input status indicator * Bridges enable quick linking of common voltage * Identification zone on front face * IP0 s 06 06 06
Series S Single Output to 660 Vac AC/DC Control
Part No. Load Voltage Load Current Control Voltage Switch Type SD Vrms A Vdc Zero Cross SDM Vrms A Vdc Zero Cross SR Vrms A 3 Vdc Random SD Vrms A Vdc Zero Cross SA Vrms A 9 Vac/Vdc Zero Cross SD Vrms
Solid State Relay. Zero Switching Types RGC Solid State Contactor 'E' Connection. Product Description RGC 1 A 60 A 30 K K E _.
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
celduc SILD r e l a i s celpac PATENTED! AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting.
AC Semiconductor Contactor pitch,5mm with Diagnostic compact size and DIN rail mounting. Ready to use SinglePhase Relay: " Install it & Forget it!" Zero cross model : 55VAC 5A back to back thyristors on
2PSS60A40 Solid State Relays 3-Phase with Integrated Heatsink
Soli State Relays -Phase with Integrate Heatsink -pole AC switching soli state contactors Prouct with.84" (7 mm) Rate operational voltage: 600 VAC Rate operational current: up to 40 AAC Control voltages:
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching
Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor U Connection Product width ranging from 17.5mm up to 70mm Rated operational voltage: up
Food Preparation Equipment Plastic Molding Lighting Control Dual Solid State Relays SEN Produkte, Support und Service TRONICAG
THE GLOBAL EXPERT IN SOLID STATE RELAY TECHNOLOGY Food Preparation Equipment Plastic Molding Lighting Control rydom has a distinguished record of providing advanced, high quality products with timely delivery
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection
Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.mm up to 70mm Rated Operational voltage: Up to 600VAC Rated Operational current: Up to 8AAC
relays Solid state /2008 relays RSR20 slim relays RSR30 miniature relays RSR40 power relays RSR50 three phase relays RSR60
33 2007 /2008 Solid state relays relays RSR20 slim relays RSR30 miniature relays RSR40 power relays RSR50 three phase relays RSR60 34 Automation is our passion For dozens of years now, Relpol S.A. has
600 V IL V IL4108 Zero Voltage Crossing Detector Triac Optocoupler
FEATURES High Input Sensitivity I FT =.0 ma, PF=.0 I FT =.0 ma, PF.0 00 ma On-State Current Zero Voltage Crossing Detector 00/800 V Blocking Voltage High Static dv/dt 0 kv/µs Inverse Parallel SCRs Provide
Control Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
SVTA4690 DIGITAL THREE PHASE ANGLE CONTROLLER Farnell order relais code code 399-6335 SVTA4690! Allows to set the voltage applied to different sort of loads :! Resistive (Bulbs, UV and IR lamps, ovens,
Power Electronics. POWERSWITCH Solid-State Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Solid-State Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
CPC40055ST. AC Power Switch INTEGRATED CIRCUITS DIVISION. Description. Characteristics. Features. Ordering Information.
AC Power Switch Characteristics Parameter Rating Units AC Operating 2-28 V AC (V rms Load With C/W Heat Sink 2 No Heat Sink Features Load up to 2A rms with C/W Heat Sink 8V P Blocking Creepage Pin 1 to
Motor Controllers 3-Phase Analog Power Controller Types RSC-AAM60/RSO...
otor Controllers 3-Phase nalog Controller Types RSC-60/RSO... Control and output modules for analogue control of 3-phase induction motors or heaters Rated operational current: 3 x, 25, 50, 90, 1 Crms Rated
celduc SIL Phase angle controller Output : VAC 32A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage
celduc SILD Output : VAC 32A(*) Input : 3-32VDC - I<10mA Diagnostic : 30VDC - 100mA r e l a i s celpac P roud to serve you
AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting. Ready to use Single-Phase Relay: " Install it & Forget it!" Zero cross model : 7-28AC 5A back to back thyristors
CI-tronic Soft start motor controller
Data sheet CI-tronic Soft start motor controller MCI 3, MCI 15, MCI, MCI 30 I-O, MCI 40-3D I-O and MCI 50-3 I-O The MCI soft starters are designed for soft starting and stopping of 3 phase AC motors, thus
38 Series - Relay interface modules A. Features /
Series - Relay interface modules 0.1-2 - 6-8 A Features 1 Pole - 6 A electromechanical relay interface modules, 6.2 mm wide. Ideal interface for PLC and electronic systems Sensitive DC coil or coil versions
Zelio Control Measurement Relays
Selection Guide Application Voltage control Current control Functions 3-phase Single-phase and d.c. Integrated current transformer - Overvoltage and between phases - Overvoltage and between phases and
CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1
MAKING MODERN LIVING POSSIBLE Technical brochure CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1 www.danfoss.com Contents Page Features... 3 Description... 3 Selection... 3 Technical data...
Motor Controllers Soft Starting/Soft Stopping Types RSC-AAM60/RSO...
otor Controllers Soft Starting/Soft Stopping Types RSC-60/RSO... Control and output modules for analogue control of 3-phase induction motors or heaters Rated operational current: 3 x, 25, 50, 90, 1 Crms
Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC. 4-20mADC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
Page 1/6 GB DIGITAL THREE PHASE ANGLE CONTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens,
celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you
Power Solid State Relay With Analog Control, pitch.5mm compact size and DIN rail mounting. Ready to use SinglePhase Relay: Phase angle controller Transfer characterisic :Angle open loop Operating voltage
48 Series - Relay interface modules A. Features
Series - Relay interface modules 8-0 - 6 A Features & Pole relay interface modules, 5.8 mm wide. Ideal interface for PLC and electronic systems.3 - Pole 0 A.5 - Pole 8 A.6 - Pole 6 A coils or sensitive
Magnecraft Solid State Relays
Magnecraft Solid State Relays Catalog 2010 Contents Series Overview....................................................3 861 Relays........................................................4 861H Relays......................................................7
Solid State Relays 1-Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K..
Solid State Relays 1Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K.. 1pole AC solid state contactors Soft start switching for short wave infrared heaters Rated operational voltage:
Solid-state Contactor Specifications
Technical Data Solid-state Contactor Specifications Bulletin Number 156 Topic Page Topic Page Catalog Number Explanation 2 Dual- and Three-phase Devices 25 Single-phase Devices 3 Product Selection 25 Product
CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1
Technical Document CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1 Features Phase angle or burst firing control mode Current loop control, 4 20 ma, 20 4 ma, 0 20 ma and 20 0 ma Voltage control,
Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
Power Electronics. POWERSWITCH Semiconductor Contactor BF 9250, BH 9250
Power Electronics POWERSWITCH Semiconductor Contactor, BH 9250 02342 According to IEC/E 60 947-4-2, IEC/E 60 947-4-3 1-, 2- and 3-pole models Load current up to 50 A For AC load up to 480 V Switching at
Description 575D30-HS. 575Di MP120D2 or P120D2 MP120D4 or P120D4 MP240D2 or P240D2 MP240D4 or P240D4. DC60P or DC60MP DC200P or DC200MP
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
Teccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)
Modular 5 A 5 A modular SSR, 1 NO AC output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 µs) insulation between and Output Zero-crossing and random switch-on versions available
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit EMR Electromechanical Relays
38 Series - Relay interface modules A
38 Series - Relay interface modules 0.1-2 - 3-5 - 6-8 A Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications.
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications. Its compact size, high efficiency, excellent reliability together with easy
6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVERS (600 VOLT PEAK)
PACKAGE SCHEMATIC 6 6 ANODE CATHODE 2 6 MAIN TERM. 5 NC* N/C 3 4 MAIN TERM. 6 *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The and consist of a AlGaAs infrared emitting diode optically coupled to a non-zero-crossing
Solid State Relays 1-Phase, Soft Start Switching Types RGS1P..K..
Solid State Relays 1-Phase, Soft Start Switching Types RGS1P..K.. 1-pole AC solid state relays Soft start switching for short wave infrared heaters Rated operational voltage: up to 660 VAC Rated operational
Advantages of the 70S2 Series
Advantages of the 70S2 Series SECTION Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed
Standard Rectifier Module
Standard Module 3~ M = 6 I = 45 A DA FSM = 3 I A 3~ Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: FO-F-B Package with DCB ceramic educed weight Improved temperature and power
Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13
Micro Contactor Relays 10 Micro Contactors 11 Micro Contactors With Solder Pins 12 Coil voltages 12 Micro Reversing Contactor 13 Technical Data 14 Dimensions 18 D946E 9 Micro Contactor Relays 4-pole AC
46.61 Series, SPDT 16A. Part Number Price Coil Voltage
www.factorymation.com/relays 85 Miniature Ice Cube Relays Mechanical flag indicator shows contact status Momentary / Lockable test button AgNi contacts (Cadmium free) Operating temperature: 40 to 58 F
PS1201 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 12 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks
Mini Contactors Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks Interface Contactor Relays Mini Contactors 10 Auxiliary Contact Blocks Mini Contactors With Fast On Tab Connectors 12 Mini Contactors
Legacy Schneider Electric Solid-State Relays. Catalog
Legacy Schneider Electric Solid-State Relays Catalog 2017 Contents Series Overview....................................................3 861 Relays........................................................4
PS2401 AC Power Switch
AC Power Switch Units AC Operating Voltage V RMS Load Current 1 A On-State V RMS Voltage Drop 1.2 (A T I L = IA) Description is an AC Solid State Switch utilizing dual power SCR outputs. This device also
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
ST300S SERIES 300A. Features. Typical Applications. Major Ratings and Characteristics. Bulletin I25158 rev. B 01/94. case style TO-209AE (TO-118)
ST300S SERIES PHASE CONTROL THYRISTORS Stud Version Features Center amplifying gate Hermetic metal case with ceramic insulator International standard case TO-209AE (TO-118) Threaded studs UNF 3/4-16UNF2A
Standard Rectifier Module
Standard ectifier Module 3~ ectifier M = 1400 I = 60 A DA FSM = 550 I A 3~ ectifier Bridge Part number - ~ ~ ~ + Features / Advantages: Applications: Package: PWS-D Package with DCB ceramic Improved temperature
Solid State Relays F-100
Solid State Relays F-100 SOLID STATE RELAYS * FEATURING FAST SWITCHING FOR CONTROL OF AC OUTPUT * Range of Digital Power Controllers first released their " X " Series of S.C.R. Power Controllers in 1980,
Solid State Relays 1-Phase with Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor 'E' Connection
Solid State Relays 1-Phase with Integrated Heatsink Zero Cross or Instant On Switching Types RGC Solid State Contactor 'E' Connection Product Width ranging from 17.5mm up to 70mm Rated Operational voltage:
IRKU/V41, 56 SERIES 45 A 60 A. ADD-A-pak TM GEN V Power Modules THYRISTOR/ THYRISTOR. Features. Benefits. Mechanical Description
Bulletin I2734 rev. E /2 IRKU/V4, 56 SERIES THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper
Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC 0-10VDC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM
Page 1/6 GB DIGITAL THREE PHASE ANGLE CTROLLER Allows to set the voltage applied to different sort of loads with 3 wires, 4 wires or inside the delta wiring: Resistive (Bulbs, UV and IR lamps, ovens, ),
IRK.105 SERIES 105 A. THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR. ADD-A-pak TM GEN V Power Modules. Features. Benefits. Mechanical Description
IRK.15 SERIES THYRISTOR/ DIODE and THYRISTOR/ THYRISTOR ADD-A-pak TM GEN V Power Modules Features High Voltage Industrial Standard Package Thick Al metal die and double stick bonding Thick copper baseplate
02/11/2015
Emergency stop and safety guard monitoring 2 channels KNE3-YS Part number 85102436 "Emergency stop" & "Safety gates monitoring" functions Single and 2-channel operation Security with redundancy and feedback
ATV12HU40M3 variable speed drive ATV12-4kW - 5hp V - 3ph - with heat sink
Characteristics variable speed drive ATV12-4kW - 5hp - 200..240V - 3ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly
ATV12H018F1 variable speed drive ATV kW hp V - 1ph
Characteristics variable speed drive ATV12-0.18kW - 0.25hp - 100..120V - 1ph Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component
ATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink
Characteristics variable speed drive ATV12-0.37kW - 0.55hp - 100..120V - 1ph - with heat sink Main Range of product Altivar 12 Product or component type Product destination Product specific application
Series HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay
Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with
Optocoupler, Phototriac Output, Zero Crossing, High dv/dt, Low Input Current
2842- Optocoupler, Phototriac Output, Zero Crossing, i793_4 A DESCRIPTION The IL4 and IL48 consists of a GaAs IRLED optically coupled to a photosensitive zero crossing TRIAC network. The TRIAC consists
Thyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply.
LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
38 SERIES. Relay interface modules A. EMR Electromechanical Relays. Common features. SSR Solid State Relays. 6.
38 Relay interface modules 0.1-2 - 3-5 - 6-8 - 16 A 38 Common features Instant ejection of relay by plastic retaining clip Integral coil indication and protection circuit 6.2 mm wide EMR - DC, AC or AC/DC
High capacity SSR, both tab and screw terminals available
(A, 15A, A type) (3A, A type) High capacity SSR, both tab and screw terminals available RELAYS FEATURES 1. Two types of terminal shape: Plug-in terminal and Screw terminal (3 A, A is screw terminal types
Advantages of the 70S2 Series
Advantages of the 70S2 Series Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed for medium-power
3.5 mm contact pin pitch 1 Pole 12 A PCB direct or via socket
41 Series - Low profile PCB relays 8-12 - 16 A Features 41.31 41.52 41.61 1 & 2 Pole - Low profile (15.7 mm height) 41.31-1 Pole 12 A (3.5 mm pin pitch) 41.52-2 Pole 8 A (5 mm pin pitch) 41.61-1 Pole 16
Solid-State Soft Starters
Selection and ordering data Rated operational voltage U e V Soft starters for three-phase asynchronous motors 3RW30 25-1B14 3RW30 35-1B14 t ambient temperature 40 C Size Order No. Price Weight Pack. Rated
ATV12HU22M2. Main. Range of product Altivar 12. Component name Quantity per set Set of 1. Built-in fan. Motor power hp Communication port protocol
Product datasheet Characteristics ATV12HU22M2 Complementary Main Range of product Altivar 12 Product or component type Product destination Product specific application Assembly style Component name Variable
MOC3051M, MOC3052M 6-Pin DIP Random-Phase Optoisolators Triac Drivers (600 Volt Peak)
MOC3051M, MOC3052M 6-Pin DIP Random-Phase Optoisolators Triac Drivers (600 Volt Peak) Features Excellent I FT Stability IR Emitting Diode Has Low Degradation 600 V Peak Blocking Voltage Safety and Regulatory