LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply.
|
|
|
- Evelyn Horn
- 5 years ago
- Views:
Transcription
1 LDW25-24 is a single or two phase AC or DC input DIN Rail Switching Power Supply. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes it market leader for various industrial telecom and renewable energy applications. LDW25-24 is Class II isolation devices suitable for SELV and PELV circuitry and are designed to be mounted on DIN rail and installed inside a protective enclosure. Single or two phase AC ( VAC) or DC ( VDC) input High efficiency and extremely compact size Plastic enclosure Class II (simplified wiring) Overload 130% Up to 70 C operating temperature with derating curve Ideal for applications with harsh mains conditions Compliant to renewable energy systems and high DC Bus RoHS Compliant Industrial Control Communication Instrumentation Equipment Renewable
2 2 LDW25-24 LDW VAC ( VDC) 1 / 2 24 VDC 1.0 A No ORing diode Technical parameters are typical, measured in laboratory environment at 25 C and 240 VAC / 50 Hz, at nominal values, after minimum 5 minutes of operation. Input AC Voltage Range Input Frequency Rated, single or two phase Operating VAC VAC Hz Input DC Voltage Range Rated VDC Input AC Current Input DC Current Inrush Peak Current Touch (Leakage) Current Internal Protection Fuse External Protection on AC Line None, external fuse must be provided Vin = 120 VAC / single phase Vin = 500 VAC / two phase Vin = 150 VDC Vin = 725 VDC It is strongly recommended to provide external surge arresters (SPD) according to local regulations. 0.5 A 0.15 A 0.3 A < 0.1 A 20 A 0.2 ma MCB 2A C curve Output Power Rated Voltage (Voltage Adjustment Range) Continuous Current Overload Limit Short Circuit Peak Current Vin = 120 VAC / single phase Vin = 240 VAC / single phase Vin = 400 VAC / two phase Vin = 500 VAC / 2 two phase 25 W 24 VDC (23 28 VDC) 1.35 A 1.50 A 1.35 A 1.30 A 4.5 A Load Regulation 0.5% Ripple & Noise 1 Hold up Time Protections Output Over Voltage Protection Status Signals Vin = 240 VAC / single phase Vin = 500 VAC / two phase Overload/short circuit: Hiccup mode Over temperature Overvoltage Green LED = DC OK 30 A 50 mvpp 35 ms 180 ms 33 VDC Efficiency > 83% Dissipated Power Parallel Connection Possible for redundancy (with external ORing module) < 4.9 W 1 Ripple and Noise are measured with 20 MHz bandwidth, probe terminated with a 0.1μF MKP parallel capacitor. NOTE: Power rating, losses, efficiency, ripple, thermal behaviour and start-up may change outside of the nominal rated input range. Contact factory for details. tech.support@psbel.com
3 LDW Operating Temperature Overtemperature protection (Start-up type tested: - 40 C * ) Derating See Figure to + 70 C Storage temperature - 40 ºC to + 80ºC Humidity Non-condensing 5-95% RH Life Time Expectancy At 25 ºC ambient full Load h (20.4 years) Overvoltage Category Pollution Degree Protection Class III (EN50178) 2 (IEC ) Class II Isolation Voltage Input to Output 4.2 kvdc Safety Standards & Approvals UL508 (reference) EN60950 (reference) EN50178 (reference) Emission EN55011 (CISPR11) Class B EN55022 (CISPR22) Class B EMC Standards EN EN Immunity EN EN EN Level 4 Level 2 Protection Degree EN60529 IP20 Vibration sinusoidal IEC Hz: ±1.6 mm; Hz: 2g 2Hours / axis (X,Y,Z) Shock IEC g 6 ms, 20 g 11 ms; 3 bumps / direction, 18 bumps total * Possible at nominal voltage with load deration Derating vs Current Vout: 24Vdc / Temp. Ambient 70 C 75 Derating vs Temperature Vout: 24Vdc / Load 1.0A [ A ] 0.90 [ C ] [ Vac ] [ Vac ] Figure 1. Output Derating Weight 170 g Dimensions (W x H x D) 72 x 90 x 61.5 mm Mounting Rail IEC 60715/H15/TH35-7.5(-15) Connection Terminals Screw type Header (24-12 AWG) 2.5 mm² Case Material ABS, Flame retardant UL94 V-0 Asia-Pacific Europe, Middle East North America Bel Power Solutions & Protection BCD.00852_AB
4 4 LDW25-24 Figure 2. Mechanical Drawing INPUT CONNECTION Single phase: L = Line (1) N = Neutral (3) 2 phase: L1 = Phase 1 (1) L2 = Phase 2 (3) DC: L1(L) = + Positive DC (1) L2(N) = - Negative DC (3) OUTPUT CONNECTION + = Positive DC (12) - = Negative DC (11) NUCLEAR AND MEDICAL APPLICATIONS - Products are not designed or intended for use as critical components in life support systems, equipment used in hazardous environments, or nuclear control systems. TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the date manufactured. Specifications are subject to change without notice. tech.support@psbel.com
5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bel Power Solutions: LDW25-24
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies.
LDW240 Series are single, two or three phase DIN Rail Switching Power Supplies. Its compact size, high efficiency, excellent reliability together with easy installation due to pluggable connectors makes
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications.
LDC240 Series is a single phase, ultra compact DIN Rail Switching Power Supply with active PFC, ideal for many applications. Its compact size, high efficiency, excellent reliability together with easy
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications.
LDC480 Series is a single phase, extremely compact Power Supply with active PFC specially designed for space sensitive and demanding applications. Its compact size, high efficiency, excellent reliability
200W DIN Rail Programmable Output Voltage Power Supply
_040-02-700-002-EH-0817 POWERMASTER Main Features High efficiency and compact size Active PFC Digital Power regulation Wide input voltage range 170 550Vac Wide output voltage range 24 120Vdc, user settable
These power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC350 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering 350 W of output power in a compact 3 x 5 x 1 inch footprint, with a variety of isolated single
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The ABC41 Series of ultra low open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in a variety
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC120 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 120 W of output power in a compact footprint, with a variety of isolated single output voltages.
3 x 2 x 0.75 Inches Form factor. PCB Mount option available. 40 Watts Convection. Approved to EN/IEC Efficiencies 85% Typical
The MBC41 Series of ultra-low open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering output power 40 W with natural convection cooling. They are available in
Single-output models feature wide-range output adjustability to meet a wide variety of standard and user-specific output voltage requirements.
Bel Power Solutions MAP55 Series of power supplies provides reliable, tightly-regulated DC power for commercial and industrial systems. Wide-range AC input and full international safety, EMI, and ESD compliance
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The ABC550 Series of open frame power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling in a
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.
The ABC75 Series of open frame power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact 3 x 2 x 1 inch footprint, with a variety of isolated single
These medical power supplies are ideal for, monitoring, home health equipment as well as surgical devices.
The MBC40 Series of open-frame medical power supplies, with its wide universal 90-264 VAC input range, is available at 40 W of output power and a variety of single and multiple output voltages. The MBC
5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W
The ABC275 Series of ultra low profile open frame power supplies feature a wide universal AC input range of 80 264 VAC, offering output power 275 W with 13 CFM forced air cooling, or up to 160 W with convection
These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.
The MBC75 Series of open frame medical power supplies feature a wide universal AC input range of 85 V 264 VAC, offering 75 W of output power in a compact footprint, with a variety of isolated single output
These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.
The ABC450 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 450 W of output power and a variety of single and multiple output
The MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.
The MBC550 Series of open frame medical power supplies feature a wide universal AC input range of 90 264 VAC, offering up to 550 W of output power with forced air cooling, or 250 W with conduction cooling
PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION
The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety,
Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.
The MPU200/MDU200 Series is based upon the proven architecture of the MPU150/MDU150 product line. The MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet
The MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.
The MPB150 Series incorporates patented high efficiency circuitry, high power density and active Power Factor Correction (PFC) to meet the requirements of networking and data communications systems, as
The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.
The innovative MPU products incorporate Power Factor Correction (PFC) with a low-profile package designed to meet 1U height constraints. The MPU150-4530G and MPU150-4350G provide high current +3.3 V and
Electrical Specifications. Adjustment range Main output ± 5% Total regulation (line and load) ± 2.0% ± 5.0% Turn-on 120 Vac Input 2.0 s max.
POWER Data Sheet NLP250 Series Single Output Total Power: 250 W Input Voltage: 85-264 Vac # of Outputs: Single SPECIAL FEATURES Active PFC and EN61000-3-2 compliant 250 W on main channel with forced air
Industrial Applications Telecom Daracom
ABC200 Series is a family of compact and efficient AC-DC power supplies suited for telecom datacom and many other industrial applications. This family meets the international information technology safety
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.
15 Watts xxx Series Ultra Slim Design 15% Peak Load for 3 seconds Ambient Operation from -1 C to +7 C High Efficiency Selectable Overload Characteristic Selectable Remote Inhibit or Enable 3 Year Warranty
LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans
LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis
Industrial PSU with universal input voltage range ( VAC line to line) and configurable output voltage. North America
World-Wide 3-phase Input Voltage Range (nom. 200 Vrms to 480 Vrms), PF > 0.94 High Power Density 16 W/in 3 94% Typical Efficiency Parallel Operation up to 16 Units (50.4 kw) Cold-Plate Cooling System -25
420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant
SHP350 Series 420 W High Line Output Power Rugged Industrial Construction Variable Speed Fan for Noise Reduction -40 C to +70 C Operation AC OK, Remote On/Off and Active Current Share Screw Terminals SEMI
This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.
RoHS Lead-Solder-Exemption Compliant Automatic 115/230 Input Voltage Selection All Outputs Fully Regulated Remote Sense, Overvoltage Protection and Overtemperature Protection Power Fail Signal Included
Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3
HPU1K5 Series Low Profile 1.7 (43.2 mm), Industrial Supply Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals Output Power up to 1500 W Load dependant variable speed fans for audible
CLP0205 Open Frame Power Supply Vac input; 5Vdc output; 200W Output Power; 0.25A stdby
; 12Vout @ 0.25A stdby Applications Industrial equipment LED Signage Telecommunications equipment Description Features Compact size 50.8mm x 101.6mm x 36.1mm (2in x 4in x 1.4in) with density of 18W/in
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms
Features DIN Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 5% (8W) peak load capacity Builtin active PFC,PF>,95 High effciency up
CP-E range Benefits and advantages
Benefits and advantages Characteristics Output voltages 5 V, 12 V, 2 V, 8 V DC Adjustable output voltages Benefits Signalling output/contact Output currents 0.625 A / 0.75 A / 1.25 A / 2.5 A / A / 5 A
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC
Features DIN-Rail Description 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection
Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC
Features DIN-Rail 2 and 3-phase operation Input voltage range: 320 575VAC Output trim range: 22.5 29.5VDC High electrical strength; high reliability Permanent overload and short-circuit protection Parallel
ABC400 Series is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications.
is a compact and efficient series of AC-DC open frame power supplies suited for telecom, datacom and many other applications. The family meets the international information technology safety standards
Switching Power Supply Type SPP1 60W Enclosed type
Type SPP1 60W Enclosed type Universal AC input full range Short circuit protection Internal input filter High efficiency High average efficiency (meets ErP) Low stand-by power consumption CE, TUV, and
DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details
120 Watts xxx Series Ultra Slim Design - 32 mm 150% Peak Load for 3 seconds Ambient Operation from -25 C to +70 C Full Load at 60 C (24V/48V) High Efficiency - Up to 92% Volt-Free Contact for OK Selectable
Power Supplies 3. SDN-C Compact DIN Rail Series
SDN-C Compact DIN Rail Series The SDN-C DIN rail power supplies are the next generation of the popular SDN series. These models combine high efficiency and compact size with new visual diagnostic LEDs
ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.
ECC100 Series -40 ºC to +75 ºC Operation 100 W - Baseplate Cooled High Efficiency Resonant Topology Screw Terminals Available 5V Standby Output Remote On/Off & Power OK Signal 3 Year Warranty The ECC100
Related Products SDP Series SFL Series SCP Series SCL Series SDU UPS
4 Power Supplies SDN-P DIN Rail Series The SDN DIN Rail power supplies provide industry leading performance. Sag Immunity, transient suppression and noise tolerant, the SDN series ensures compatibility
Output Voltage* (nom.)(adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width High Power Factor up to 99% High efficiency up to 94% True back power immunity Low heat dissipation 150% peak current Automatic
Primary switch mode power supplies Product group picture
Primary switch mode power supplies Product group picture /1 ABB Catalog Electronic Products and Relays 2015 2CDC 110 004 C0210 Primary switch mode power supplies Table of contents Primary switch mode power
18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms. 100mVp-p 200mVp-p 120mVp-p 240mVp-p -25 C - 70 C 48Vout 240mVp-p
Features DIN Rail Universal AC Input (85) Protections: SCP, OVP, OLP, OTP DC OK Indicator LED with Relay Contacts 15% (18W) peak load capacity Builtin active PFC,PF>,95 High effciency up to 9.5% AC/DC
CLP0112 Open Frame Power Supply Vac input; 12Vdc output; 150W Output Power
Applications Telecommunications equipment Embedded Computing Storage Systems Industrial equipment Features Compact size 50.8 mm x 101.6 mm x 36.1 mm (2 in x 4 in x 1.4 in) with density of 13.4W/in 3 Universal
VP ELECTRONIQUE MASSY - Tel:
KEY FEATURES Switching Power Module for PCB Mountable Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise Small Size But Higher Wattage Screw Terminal
Electrical Specifications
POWER Data Sheet NFS110 Medical Series Single and quad output Total Power: 80-110 W Input Voltage: 100-240Vac 127-357 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Medical,
Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W
AEL15-80 Series 15-80 Watts Energy Efficiency Level V CEC 2008 and EISA 2007 Compliant Limited Power Source Approval China Compulsory Certification (CCC) Qualified +60 C Operating Temperature Compact Dimensions
CP-T range Product group picture
Product group picture /1 ABB Catalog Electronic Products and Relays 1/1 2CDC 110 00 C09 Table of contents CP-T range Product group picture /1 Table of contents /2 Benefits and advantages / Ordering details
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Din Rail Switching Power Supply 180 Watt with 18CFM FAN for 12V to 48V Output Voltage 150 Watt with 30CFM FAN for 5V Output Voltage High Efficiency up to 93% Universal Input: 90-264 VAC Low
MTC Series 15 W AC/DC Switching Power Supply Module Medical
Switching Power Modules for PCB Mounting Fully Encapsulated Plastic Case Universal Input Range 90-264VAC, 47-440 Hz Regulated Low Ripple and Noise & High Efficiency Isolation class II UL60601-1 / IEC60601-1
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.4A without
CCH400 & CCH600 Series
CCH4 & CCH6 Series 4 W & 6 W - Baseplate Cooled Compact 8.4 (214 mm) x 4 (12 mm) x 1.69 (43 mm) Package High Efficiency up to 9% -4 C to +85 C Baseplate Operating Temperature No Fan, Quiet Operation MIL-STD-461
PDAM500 Series 500W Power Supply
UL / IEC / EN 60601 3.1 Edition & UL / IEC / EN 60950 AM2 Safety Approvals High power density: 500W in 3 x 5 footprint Open Frame or Enclosed Versions Available Remote ON/OFF Function Built-in 12V/0.3A
Metal Case Power Supplies
, 120 480 Watt Features Compact U-bracket and enclosed power supplies Screw terminal block Very high efficiency up to 93 % No internal fan for 120 W & 240 W models. Universal input 90 264 VAC Adjustable
TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3
, Features High power density 40 W power supply (enclosed / open frame) 2 x MOPP Medical safety according to AAMI/ANSI ES 60601-1:2005(R) and IEC/EN 60601-1 3rd edition Ready to meet ErP directive, < 0.3
Switching power supplies CP range, Linear power supplies CP-L range. Content
CP range, Linear power supplies CP-L range Content Switching power supplies, primary switch mode, CP range Benefits and advantages... 136 Approvals... 137 Ordering details... 138 Technical data... 11 Dimensional
CP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
LB115S 115W Single Output
Features Small size of 2 x 4 x 1.3 75W convection cooled/115 Watts with 200 LFM Universal Input 90-264Vac Meets EN55015 Conducted EMI Meets IEC61000-3-2 Class C for less than 1 Watt to full power Approved
POWERBOX Defense Line 1200 DBA Series 1200W AC/DC Conduction Cooled. Preliminary
Preliminary Description The DBA series, very compact and low profi le AC/DC power supply up to in chassis format, incorporates input filtering, input and output protections, very robust mechanical mounting
NLP40 SERIES 50 Watt Open Frame Power Supply Measures: 4.25 x 2.50 x 1.15
Total Power: 40-50 W Input Voltage: 90-264 VAC 120-370 VDC # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package (1U applications) Universal input Overvoltage and short circuit
CB Scheme UL508 UL ATEX II3G
Industrial Power Supplies UL Hazloc Class I, division 2 approval and ATEX certification SEMI F47 compliant for voltage sag immunity Rugged metal case with optional side-mounting Very high efficiency up
300W Railway Single Output DC-DC Converter
SPECIFICATION MODEL OUTPUT INPUT PROTECTION WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY & EMC (Note 4) OTHERS NOTE OVER OVER VOLTAGE SAFETY STANDARDS
ECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings
ECP225- Series C-DC Power Supplies 225 Watts Low Profile High Power Density 3 by 5.0 Footprint 50 W Convection/ 225 W Force Cooled Ratings 5 V Standby and 2 V Fan Outputs Medical and ITE pprovals High
Type CP-S, CP-C & CP-A Switch mode
Switch mode power CP-S, CP-C & CP-A Switch mode Characteristics CP-S and CP-C range Output current 5 A, 10 A and 20 A Integrated power reserve of up to 50 % 5 A and 10 A devices with pluggable connecting
Electrical Specifications
Single & Quad output 1 of 5 Total Power: 80-110 W Input Voltage: 85-264 Vac 120-370 Vdc # of Outputs: Single, quad Special Features 7.0 x 4.25 x 1.8 inch package Overvoltage and short circuit protection
4.59A 2.36A 6.8A 13A 3.85W 2.85W ms 21ms. 31ms 100ms 48Vout 49ms 100ms. 240mVp-p 480mVp-p C 48Vout 480mVp-p
Features DI Rail Description Universal AC Input (85264VAC) Protections: SCP, OVP, OP, OTP DC OK Indicator ED with Relay Contacts 15% (72W) peak load capacity Builtin active PFC, PF>.95 High effciency up
Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.
![Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.](/thumbs/96/127072968.jpg "Efficiency [%] 115VAC 230VAC. Parameter Condition Value. Line Regulation low line to high line ±0.5% max. Load Regulation 10% to 100% load ±0.5% max.")
Features Regulated Converter Universal Input VAC 3W PCB Mount Package
Power supply CP-E 24/2.5
2CDC 271 015 F0t06 a OUTPUT L+, L : terminals output b DC OK: terminal signalling output c INPUT L, N, PE: terminals input d OUTPUT OK: green LED output voltage OK e OUTPUT Adjust: potentiometer adjustment
Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter
Features Regulated Converter Description 35mW max. no load power consumption Efficiency up to 76% Isolated output 3kVAC / 1 minute SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
CLP0224 Open Frame Power Supply Vac input; 24Vdc output; 200W Output Power
Applications Industrial equipment Telecommunications equipment Features Compact size 50.8 mm x 101.6 mm x 37.25 mm (2 in x 4 in x 1.47 in) with density of 18 W/in 3 Universal AC Input Range (90 264VAC)
Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load
Features Regulated Converter Description 4mW max. no load power consumption High efficiency up to 76% Isolated output 3kVAC / 1 min SCP, OVP protection Wide operating temperature range: -4 C to +85 C Universal
Power supply CP-E 24/20.0
2CDC 271 027 F0008 a OUTPUT L+, L+, L, L-: terminals output b INPUT L, N, PE: terminals input c 13-14: terminals - signalling contact d OUTPUT OK: green LED output voltage OK e OUTPUT LOW: red LED output
General. Efficiency Isolation. Dimensions Net Weight. Safety & EMC
10KV Lightning Surge Protection Smart Over-Temperature Protection Universal AC Input up to 305Vac High Efficiency (Up to 92%) Active Power Factor Correction Constant Current With Dimming Options Waterproof
Power Supplies. SCL Series. Features. Related Products. Applications
SDN Series The SDN family of DIN Rail power supplies have industry leading performance with a true industrial grade design and high quality that meets difficult industrial environmental conditions including
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
All specifications valid at normal input voltage, full load and +25 C after warm-up time unless otherwise stated.
DPO-500 KEY FEATURES Open Frame Switching Power Supply Remote ON/OFF Function 240 Watt with Free Air Convection 500 Watt with 30CFM FAN Built-in 12V/0.3A Auxiliary Output Standby 5V@1A with Fan, @0.6A
LFWLP W 12V 15.00A 25.00A 92%
WLP350 Series 350 Watts Low profile 1 5 x 3 footprint 200W / 350W Fan Up to 94% efficient Cover kits available EN55032 Level B conducted & radiated 5 Year warranty The LFWLP350 series of low profile, open
PM24S/DR24S series 60W Single Output DC/DC Converter
FEATURES Efficiency up to 92% Wide input range, 9V-36V Package Dimension: Panel Mount: 100.0*56.0*19.0mm (3.94 * 2.20 *0.75 ) Din Rail: 118.6*67.1*23.5mm (4.67 *2.64 *0.93 ) Over voltage protection, hiccup
Series AMEPR60-AZ up to 5A AC-DC / DC-DC LED Driver / Converter
Click on Series name for product info on aimtec.com Series AMEPR60-AZ Models Single output FEATURES: AC-DC Constant Current or Constant Over Temperature Protection Voltage LED Driver Over Current Protection
Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter
Features Regulated Converter Unique, patent-pending design Isolated power supply with integrated mains filter Packaged inside of line filter case Safe, touchable DC outputs Easy installation Worldwide
15 W DC/DC CONVERTERS. SERIES DESCRIPTION Page. PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation
15 W DC/DC CONVERTERS SERIES DESCRIPTION Page PC15WR 2:1 Input Range 2 2 x 1 Metal Can Package 2kv Isolation PC15WR4 4:1 Input Range 6 2 x 1 Metal Can Package 2kv Isolation CTC TECHNOLOGY CO.,LTD. DC /
Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter
Features Regulated Converters Description Compact low profile AC-DC power supply mw no load power consumption Class II power supply with kvac isolation Universal input voltage range (~VAC) Low output ripple/noise
Switched mode power supply for DIN rail mounting type SMP23 DC24V/40A
Switched mode power supply for DIN rail mounting type SMP DC4V/40A Description Switched mode power supply (SMP) for rail mounting, three-phase supply voltage, high efficiency, integral input filter and
Compliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight
IEC 1-1-2 4th Edition Compliant BF (Body Floating) Rated Class II Construction for Home Health Care Applications Class I With Functional Ground Connection 3 x 5 Footprint ua @ 264VAC Earth Leakage Current
IF_S-1W & IF_D-1W Series 1W isolated DC-DC converter with Fixed Input Voltage and Regulated Single Output
IF_S-1W & IF_D-1W Series 1W isolated - converter with Fixed Input Voltage and Regulated Single Output FEATURES Compact size SIP/DIP Package I/O isolation test voltage 3k V Operating ambient temperature
IMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet
IMA 600 Watts Power Supply Series for medical and industrial applications Product datasheet 600 Watts Power Supply Series for medical and industrial applications Features Safety rated for Medical, Industrial
DRC-40 series LPS. 40W Single Output with Battery Charger (UPS Function) File Name:DRC-40-SPEC Sicherheit ID
LPS Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 SPECIFICATION MODEL DRC-40A DRC-40B OUTPUT NUMBER CH1 CH2 CH1 CH2 DC VOLTAGE 13.8V 13.8V 27.6V 27.6V RATED CURRENT 1.9A
QUINT-PS/ 3AC/24DC/10
Primary-switched power supply with SFB technology, 3 AC, output current 10 A INTERFACE Data sheet 103131_en_01 1 Description PHOENIX CONTACT - 09/2009 Features QUINT POWER power supply units Maximum system
POWER. NLP40 Series. Single, Dual and Triple Output. Data Sheet
POWER Data Sheet NLP40 Series Single, Dual and Triple Output Total Power: 40-50 W Input Voltage: 90-264 Vac 120-370 Vdc # of Outputs: Single, dual, triple SPECIAL FEATURES 4.25 x 2.5 x 1.15 inch package
AC-DC ITE & Medical Switching Power Supply
KEY FEATURES U Bracket Medical Switching Power Supply Cooling by Free Air Convection 160 Watts and 240 Watt with 10CFM Forced Air 4000VAC Input to 2MOPP Insulation High Efficiency up to 94% With P.F.C.
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES
XSOLO ULTRA-COMPACT, HIGH-EFFICIENCY 500 W AND 1000 W SINGLE OUTPUT POWER SUPPLIES Advanced Energy's Xsolo series, part of our low voltage solutions, delivers an incredible convection-cooled 504 W in an
48V Output AC/DC Converter Box Type Package
FEATURES Wide input voltage range, 85~265VAC 360W Output Full Load Efficiency up to 93.5% @220VAC; Metal Case Box Type Package Package Dimension: 165.0x115.0x25.4mm (6.50 x4.53 x1.00 ) Operating Temperature
Output Voltage nom. (adjustable)
Industrial Power Supplies TIB Series, 80 480 W Slim profile, reduced module width Alternative side-mounting for flat panels Active Power Factor High efficiency up to 94% Back power immunity 150% peak current
Watts HCP Series
ACDC 6 Watts HCP Series High Efficiency up to 9% xppower.com High Power Density Programmable Output Voltage (%%) Programmable (%%) Parallel Operation Fully Featured Signals & Controls Year Warranty Specification
IMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet
IMA 1000 Watts Power Supply Series for medical and industrial applications Product data sheet Features 1000 Watts Power Supply Series for medical and industrial applications Safety rated for Medical, Industrial
PART NUMBER STRUCTURE. P-DUKE Technology Co., Ltd Page 1. Automation Datacom IPC. Industry Measurement Telecom
Automation Datacom IPC Industry Measurement Telecom Automobile Boat Charger Medical PV Railway PART NUMBER STRUCTURE TAD 65 U B - xx yy - Series Name Output Input Output Output Output Output Output Protection
HEC-45LTN-45PFAS Rev A
A. Features High Efficiency (Up to 85%). Active Power Factor Correction (Typical 0.96). Isolation Class II. All-Round Protection: OVP/SCP/OPP. Fully isolated plastic case with IP20 and dry location. Class
NLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26
Total Power: 65-75 W Input Voltage: 85-264 VAC 120-370 VDC* # of Outputs: Single, dual, triple SPECIAL FEATURES Universal Input 3 x 5 footprint Low profile fits 1U applications EN61000-3-2 compliance option
TE W Single Output External Power Test & Measurement/Industrial Series
Features Meets DoE Efficiency Level VI Requirements No load input power Average Efficiency Up to 120W of AC-DC Power Universal Input 90-264Vac Input Range IPX-2 Rated Enclosure for protection against liquid
MAD40 MULTI -OUTPUT SERIES OPP SCP OVP. 2 X 3.5 Inch AC-DC POWER SUPPLIES. UNIVERSAL INPUT RANGE UP TO 40Watts PART NUMBER STRUCTURE LOW CROSS REG.
MAD40 MULTI -OUTPUT SERIES 2 X 3.5 Inch AC-DC POWER SUPPLIES UNIVERSAL INPUT RANGE UP TO 40Watts FEATURES 0.15 WATT LOW STANDBY POWER CONSUMPTION ULTRA LOW CROSS REGULATION UNDER 1.5 WIDE INPUT VOLTAGE