3 Input (+) & 4 Input (-) 1 & 2 Output
|
|
|
- Miranda Marsh
- 5 years ago
- Views:
Transcription
1 Product Catalogue
2 DC SSR 02 ~ 40 Amps INPUT OUTPUT : DC Control, : Darlington/MOSFET Input Series : 001 K 3 Input (+) & 4 Input (-) 1 & 2 A = 3.2 C/W C = 0.5 C/W For Heatsink details refer to Recommended Heatsink chart Salient Features Opto Isolation 2500 VAC Input Compatible to TTL logic MOSFET OUTPUT Reverse Polarity Protection. Chassis Mountable / DIN Rail Mountable with Integral heatsink. Electrical TA = 25 0 C Note: For Random T - On SSR, add letter K in place of J. Unit 001 KDD KDD KDD KDD Control Volt Range Vdc Control Curr Range ma Pick-Up Voltage Vdc Drop-Out Voltage Vdc Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator Load Current I T A 2 ~ Load Voltage Vdc Surge Curr (1cycle Surge) On state Voltage Drop V TM Vdc Off state lekage Curent@ rated Voltage ma Turn-On T-On µs Turn -Off T- Off µs Operating Temp T Oper 0 C - 30 to to to to + 80 *Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one year for relay value only.
3 Din Ready SSR (240/660 VAC) INPUT : DC Control, OUTPUT : Back - to - Back SCR Series : DIN READY FEATURES Input: DC Control (TTL or CMOS Compatible) : Back-to-Back SCR (No configuration) Opto Isolation 2500VAC (4000 V optional) Zero voltage turn-on or Random turn-on Builtin safety cover Reverse voltage protection for DC/AC Relays Built in snubber for high DV/DT DIN mount or back plate mounting LED indicator showing relay ON status (j: Zero voltage turn-on; K:Random turn-on) DC C Control Unit DIN 30D DIN 30D DIN 30D DIN 30D Control voltage range Vdc Control current range ma Pick-up voltage Vdc Drop-out voltage Vdc Input resistance Current regulator Current regulator Current regulator Current regulator RMS on-state current I T A Mains control volt Vrms Vac Repetitive peak off state voltage Vdrm Vpk Zero turn-on voltage Vac On-state voltage drop Vtm Vac Off-state leakage rated voltage Idrm ma Peak one cycle surge Current (Non-Rrep) I TSM A Holding current I H ma Critical rate of rise of off state voltage dv/dt V/µs Thermal resistance (junction to case) Rthjc 0 C/W Frequency range f Hz 47 ~ ~ ~ ~ 63 Storage temperature Ts 0 C - 30 to to to to Operating temperature To 0 C - 30 to to to to + 80 Turn-on time T-on ms Turn -off time T- off ms Fusing current I 2 T A 2 S All electrical parameters = 25 Deg C Our policy is one of continuous development and specifications are subject to change without notice. warranty is limited to a period of one year for relay value only
4 Single Phase SSR (240VAC) INPUT OUTPUT : DC Control, : Back - to - Back SCR Series : 001 SJ/K 3 Input (+) & 4 Input (-) 1 & A = 3.2 C/W B = 1.0 C/W C & D = 0.5 C/W For Heatsink details refer to Recommended Heatsink chart Salient Features Opto Isolation 2500 VAC Zero Voltage Turn On/Random Turn On Reverse Voltage Protection; TTL/CMOS Compatible (Sink mode) : NO/NC Configuration Suitable for inductive loads Built-In Snubber Safety cover provision Chassis Mountable / DIN Mountable with Integral heatsink. Electrical TA = 25 0 C Note: For Random T - On SSR, add letter K in place of J. Input Unit SJDA SJDA SJDA SJDA Control Volt Range Vdc Control Curr Range m A Pick-Up Voltage Vdc Drop-Out Voltage Vdc Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator Rms On State Current I T A Mains Control Volt Vrms Vac Peak Off State Voltage Vdrm Vpk Off State Lekage Curr Idrm ma Zero T-On Voltage Vpk On state Voltage Drop V TM Vac Peak one Cycle Surge Curr(Non Rep) I TSM A Holding Current I H m A Critical Rate of Rise of Off State Voltage dv/dt V/µs Thermal Resistance R TH 0 C/W Frequency Range f Hz 47 ~ ~ ~ ~ 63 Turn-On T-On ms Turn -Off T- Off ms Operating Temp T Oper 0 C -30 to to to to +80 Fusing Current I 2 T A 2 S *Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one year for relay value only.
5 Din Ready SSR (660 VAC) INPUT OUTPUT : DC Control, : Back - to - Back SCR Input Series : DIN 30D Highlights Input: DC Control (TTL or CMOS Compatible) : Back-to-Back SCR (No configuration) Opto Isolation 2500VAC (4000 V optional) Zero voltage turn-on or Random turn-on Builtin safety cover Input reverse voltage protection Built in snubber for high DV/DT DIN mount or back plate mounting LED indicator showing relay ON status Electrical TA = 25 0 C 3 Input (+) & 4 Input (-) 1 & 2 Note: For Random T - On SSR, add letter KD in place of D. Unit DIN 30D DIN 30D DIN 30D DIN 30D Control Voltage Range Vdc Control current range ma Pick-up voltage Vdc Drop-out voltage Vdc Input resistance Current regulator Current regulator Current regulator Current regulator RMS on-state current IT A Mains control volt Vac Repetitive peak off state voltage Vdrm Vpk Zero turn-on voltage Vac On-state voltage drop VTM Vac Off state leakage rated voltage Idrm ma Peak one cycle surge Current (Non-Rrep) I TSM A Holding Current I H ma Critical rate of rise of off-state voltage dv/dt V/µs Thermal resistance o (junction to case) Rthjc C/W Frequency range f Hz 47 ~ ~ ~ ~ 63 o Storage temperature Ts C - 30 to to to to + 10 o Operating temperature To C - 30 to to to to + 8 Turn-on time T-on ms Turn-off time T-Off ms Fusing current I 2 T A 2 S *Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one year for relay value only.
6 Three Phase SSR (480VAC) INPUT OUTPUT : DC Control, : Triac Input Series : 012 J/K Salient Features Opto Isolation 2500 VAC Voltage Range 50 to 480 Vac Load Current 3x10A/16A/25A/40A Reverse Polarity Protection Electrical TA = 25 0 C C & D = 0.5 C/W F & G = 0.14 C/W For Heatsink details refer to Recommended Heatsink chart Note: For Random T - On SSR, add letter K in place of J. Unit 012 JDA JDA JDA JDA Control Volt Range Vdc Control Curr Range m A Pick-Up Voltage Vdc Drop-Out Voltage Vdc Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator Rms On State Current I T A Mains Control Volt Vrms Vac Peak Off State Voltage Vdrm Vpk 800 ~ ~ ~ ~ 1200 Off State Lekage Curr Idrm ma Zero T-On Voltage Vpk On state Voltage Drop V TM Vac Peak one Cycle Surge Curr(Non Rep) I TSM A Holding Current I H m A Critical Rate of Rise of Off State Voltage dv/dt V/µs Thermal Resistance R TH 0 C/W Frequency Range f Hz 47 ~ ~ ~ ~ 63 Turn-On T-On ms Turn-Off T-Off ms Operating Temp T Oper 0 C - 30 to to to to + 80 Fusing Current I 2 T A 2 S *Our policy is one of continuous development and specifications are subject to change without notice. Warranty is limited to a period of one year for relay value only.
7 Three Phase SSR (480VAC) INPUT :A C Control, OUTPUT :Triac Series : 012 J/K C & D = 0.5 C/W F & G = 0.14 C/W For Heatsink details refer to Recommended Heatsink chart Salient Features Opto Isolation 2500 VAC Voltage Range 50 to 440 Vac Load Current 3x10A/16A/25A/40A Note: For Random T - On SSR, add letter K in place of J. AC C C Control Unit 012 JAA JAA JAA JAA Control Volt Range Vac Control Curr Range m A Pick-Up Voltage Vac Drop-Out Voltage Vac Input Resistance Current Regulator Current Regulator Current Regulator Current Regulator Rms On State Current I T A Mains Control Volt Vrms Vac Peak Off State Voltage Vdrm Vpk 800 ~ ~ ~ ~ 1200 Off State Lekage Curr Idrm ma Zero T-On Voltage On state Voltage Drop V TM Vac Peak one Cycle Surge Curr(Non Rep) I TSM A Holding Current I H m A Critical Rate of Rise of Off State Voltage dv/dt V/µs Thermal Resistance R TH 0 C/W Frequency Range f Hz 47 ~ ~ ~ ~ 63 Turn-On T-On ms Turn-Off T-Off ms Operating Temp T Oper 0 C - 30 to to to to + 80 Fusing Current I 2 T A 2 S Our policy is one of continuous development and specifications are subject to change without notice. warranty is limited to a period of one year for relay value only
8 Single Phase SSR (440VAC) INPUT :A C Control, OUTPUT :Back-to-Back SCR Series : 001 SJ/K A = 3.2 C/W B = 1.0 C/W C & D = 0.5 C/W For Heatsink details refer to Recommended Heatsink chart Salient Features Opto Isolation 2500 VAC Zero Voltage Turn On/Random Turn On : NO/NC Configuration Suitable for inductive loads Built - In Snubber Safety cover provision Chassis Mountable / DIN Mountable with Integral heatsink. Note: For Random T - On SSR, add letter K in place of J. AC C C Control Unit 001 SJAA SJAA SJAA A SJAA Control Volt Range Vac Control Curr Range m A Pick-Up Voltage Vac Drop-Out Voltage Vac Input Resistance k ohms 13(typ) 13(typ) 13(typ) 13(typ) Rms On State Current I T A Mains Control Volt Vrms Vac Peak Off State Voltage Vdrm Vpk Off State Lekage Curr Idrm ma Zero T-On Voltage Vpk On state Voltage Drop V TM Vac Peak one Cycle Surge Curr(Non Rep) I TSM A Holding Current I H m A Critical Rate of Rise of Off State Voltage dv/dt V/µs Thermal Resistance R TH 0 C/W Frequency Range f Hz 47 ~ ~ ~ ~ 63 Turn-On T-On ms Turn-Off T-Off ms Operating Temp T Oper 0 C -30 to to to to 80 Fusing Current I 2 T A 2 S Our policy is one of continuous development and specifications are subject to change without notice. warranty is limited to a period of one year for relay value only
9 Recommended Heat Sink Selection Chart qsa Heat sink type Length No. A 3.2 o C/W 60 NI 110 MM 145 AG 145 MM B 1 o C/W 202 MW 50 MM 204 MWC 50 MM C&D 0.5 o C/W 202 MW 135 MM 204 MWC 100 MM E 0.2 o C/W 350 HT DOUBLE 225 MM SIDED COOLING F & G 0.14 o C/W 350 HT 400 MM DSC Application Notes Definition of Solid State Relays (SSR) Selecting The Proper SSR A relay with isolated Input &, whose functions are achieved by means of Electronic Components without the use of moving parts - NARM (USA) Select a relay whose current exceeds the normal load current. Verify load current w.r.t ambient temperature (refer to derating curves). SSR should be provided with an external heatsink for I L >3A. Apply heatsink compound between SSR base & external heatsink. Ratings are based on single unit in free airflow. Ratings for closely packed units, careful consideration of the ambeint temperature will be necessary. If I L is lower thatn I H (<12xIDRM) it is required to take special protection to ensure proper operations. Protect the output device from high voltage transients by using MOVs. Use RC network to improve dv/dt. To protect SSR against short circuits, make use of semiconductor fuses. (I 2 t rating of semiconductor fuse must be lower than that of SSR I 2 t) 34
10 Application notes Recommended Ratings For Motor Loads (ON/OFF) 1. Relays for motor loads are selected on the basis of starting current of the motor. The thumb rule is Istart = 5 X Irun. To get the appropriate rating of the SSR, derate the SSR rating by 5 and use it as per derating curve. 2. Make use of 3 single phase SSRs if 001 series is selected. Otherwise, use a single 3 phase SSR if 012 series is selected. 3. For 240 vas 1f SSR (001 series), use MOV type RDN 275/14 one each across terminals 1 & For 440 vac 3 f SSR, use MOV type RDN 510/20 one each across terminals 1 & 2 (1 f SSR) or one each across terminals R&U, S&V, T&W (012 Series). Selection of protection resistors & fuses for 3 phase motor reversing ssrs Sl. No. Current rating for Wire Would Wattage (English Electric Fuse Rating & Type) SSR Resistor Value 01 10A 6 OHMS 25W GSB A 4 OHMS 50W GSB A 2.5 OHMS 75W GSB A 1.75 OHMS 125W GSB 45 35
SOLID STATE RELAY RATINGS
Solid State Relays SOLID STATE RELAY RATINGS PART NUMBER HPR48A25 HPR48A50 HPR48A75 3PSS60A75 HPR48D25 HPR48D50 HPR48D75 Rated operational current AC51 @ Ta=25 C 25 AMPS rms 50 AMPS rms 75 AMPS rms 75
3.6. Control Relays and Timers D A M D 2. Contents. Product Overview. Catalog Number Selection. Solid-State Relays
.6 Control Relays and Timers Product Overview Catalog Number Selection D9, D96 and D99 Series Description D9 = Hockey puck D96 = Compact D99 = DIN rail Contents D 9 2 5 A M D 2 Output Voltage 1 = 2 60
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA
Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA 24.... 06/RA 44.... 08/RA 48.... 12 AC Solid State Relay Zero switching Direct copper bonding technology Rated operational current:, 2,
Series S Single Output to 660 Vac AC/DC Control
Part No. Load Voltage Load Current Control Voltage Switch Type SD Vrms A Vdc Zero Cross SDM Vrms A Vdc Zero Cross SR Vrms A 3 Vdc Random SD Vrms A Vdc Zero Cross SA Vrms A 9 Vac/Vdc Zero Cross SD Vrms
Silicon Bidirectional Thyristors
Preferred Device Silicon Bidirectional Thyristors Designed for high performance full-wave ac control applications where high noise immunity and high commutating di/dt are required. Blocking Voltage to
Advantages of the 70S2 Series
Advantages of the 70S2 Series SECTION Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed
PCB MOUNT SOLID STATE RELAY ESR2 SERIES
PCB MOUNT SOLID STATE RELAY ESR2 SERIES E155181(R) FEATURES PCB Mount; Single in Line Package. Optically Isolated. Input LED Indicator. High dv/dt and High Blocking Voltage. Low Input Power Consumption,
Advantages of the 70S2 Series
Advantages of the 70S2 Series Since acquiring this line of miniature SSRs from Grayhill, this product has continuously evolved both functionally and visually. The 70S2 Series relays are designed for medium-power
(400 Volts Peak) COUPLER SCHEMATIC STANDARD THRU HOLE
GlobalOptoisolator (00 Volts Peak) The MOC0, MOC02 and MOC0 devices consist of gallium arsenide infrared emitting diodes optically coupled to a monolithic silicon detector performing the function of a
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
Series HD 2A, 60Vdc, True Output Status Feedback, Short-Circuit Protected DC Solid-State Relay
Part* Number HD00CFW DESC Drawing Number HD00CFY 88062-008 HD02CFW HD02CFY 88062-006 HD20CFW HD20CFY 88062-004 HD22CFW HD22CFY 88062-002 HD24CFW HD24CFY Relay Description Solid State Relay (SSR) SSR with
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60
Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60 Zero switching (RM1A) or instant-on switching (RM1B) AC Solid State Relay Direct copper bonding
6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT (800 VOLT PEAK)
PACKAGE SCHEMATIC ANODE 1 6 MAIN TERM. CATHODE 2 5 NC* N/C 3 ZERO CROSSING CIRCUIT 4 MAIN TERM. *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The MOC3081M, MOC3082M and MOC3083M devices consist of a GaAs
MOC3081M, MOC3082M, MOC3083M 6-Pin Zero-Cross Optoisolators Triac Driver Output (800 Volt Peak)
MOC3081M, MOC308M, MOC3083M 6-Pin Zero-Cross Optoisolators Triac Driver Output (800 Volt Peak) Features Underwriters Laboratories (UL) recognized file #E90700, Volume VDE recognized file #10497 add option
(250 Volts Peak) COUPLER SCHEMATIC. MAXIMUM RATINGS (TA = 25 C unless otherwise noted) Rating Symbol Value Unit STYLE 6 PLASTIC
(0 Volts Peak) The Series consists of gallium arsenide infrared emitting diodes, optically coupled to silicon bilateral switch and are designed for applications requiring isolated triac triggering, low
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink
Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current
MAC12HCDG, MAC12HCMG, MAC12HCNG
MAC2HCDG, MAC2HCMG, MAC2HCNG Pb Description Designed primarily for full-wave ac control applications, such as motor controls, heating controls or dimmers; or wherever full wave, silicon gate controlled
The SSR P Series. Phase-Fired SCR Power Controllers. for resistive heating loads. Phase-Fired SCR Power Controllers AMPS VAC
The SSR P Series Phase-Fired SCR Power Controllers 15-70 AMPS 80-600 VAC Phase-Fired SCR Power Controllers for resistive heating loads. ROBICON 1996 Rev. 12/96 Applications The SSR P series models are
SOLID-STATE RELAYS. DATA SHEET page 1/13. Overview
DATA SHEET page 1/13 Overview In 1974, Opto 22 introduced the first liquid epoxy-filled line of power solid-state relays (SSR). This innovation in SSR design greatly improved the reliability and reduced
6-PIN DIP ZERO-CROSS PHOTOTRIAC DRIVER OPTOCOUPLER (600V PEAK)
PACKAGE SCHEMATIC ANODE CATHODE 2 N/C 3 ZERO CROSSING CIRCUIT MAIN TERM. 5 NC* 4 MAIN TERM. *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The MOC30X-M and MOC3X-M devices consist of a GaAs infrared emitting
S1VM02600A TO-92 (TO-226AA) SCRs 1.5 AMPERES RMS 600 VOLTS. Sensitive Gate Sillicon Controlled Rectifiers Reverse Blocking Thyristors FEATURES
LITE-ON SEMICONDUCTOR Sensitive Gate Sillicon Controlled Rectifiers Reverse Blocking Thyristors SCRs 1.5 AMPERES RMS 6 VOLTS FEATURES Sensitive Gate Allows Triggering by Microcontrollers and Other Logic
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B
Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B AC switching Solid State Relay Switching through back to back thyristors Long
MAC16DG, MAC16MG, MAC16NG
MAC6DG, MAC6MG, MAC6NG Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking Voltage to 800
LDR3 Outline Dimensions. Dimension Inches Millimeters
OUTLINE DRAWING Dual SCR Module 5 Amperes / 16-18 Volts Ordering Information: Select the complete eight-digit module part number from the table below. Example: LDR3165 is a 16V, 5 Ampere Dual SCR Isolated
PS2401 AC Power Switch
AC Power Switch Units AC Operating Voltage V RMS Load Current 1 A On-State V RMS Voltage Drop 1.2 (A T I L = IA) Description is an AC Solid State Switch utilizing dual power SCR outputs. This device also
600 V IL V IL4108 Zero Voltage Crossing Detector Triac Optocoupler
FEATURES High Input Sensitivity I FT =.0 ma, PF=.0 I FT =.0 ma, PF.0 00 ma On-State Current Zero Voltage Crossing Detector 00/800 V Blocking Voltage High Static dv/dt 0 kv/µs Inverse Parallel SCRs Provide
6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK)
-PIN DIP RANDOM-PHASE PACKAGE SCHEMATIC ANODE MAIN TERM. CATHODE NC* N/C 3 MAIN TERM. *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The MOC30XM and MOC30XM series are optically isolated triac driver devices.
MOC3031M MOC3032M MOC3033M MOC3041M MOC3042M MOC3043M. Parameters Symbol Device Value Units TOTAL DEVICE Storage Temperature. T STG All -40 to +150 C
-PIN DIP ZERO-CROSS DESCRIPTION The MOC303XM and MOC304XM devices consist of a AlGaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage
6-PIN DIP ZERO-CROSS OPTOISOLATORS TRIAC DRIVER OUTPUT (250/400 VOLT PEAK)
-PIN DIP ZERO-CROSS DESCRIPTION The MOC303XM and MOC304XM devices consist of a AlGaAs infrared emitting diode optically coupled to a monolithic silicon detector performing the function of a zero voltage
S112S01 Series S116S01 Series
S11S1 Series/S11S1 Series S11S1 Series S11S1 Series SIP Type SSR for Medium Power Control Features 1. Compact, high radiation resin mold package. RMS ON-state current S11S1 Series: 1Arms at TC
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P
Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P AC semiconductor contactor Multi-function - 5 selectable modes of operation: Phase Angle, Distributed Full Cycle and Burst Control
Thyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
LJxx08xx & QJxx08xHx Series
LJxx8xx & QJxx8xHx Series RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature
LJxx08xx & QJxx08xHx Series
RoHS Description This 8 A High Temperature Alternistor Triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
T1235T-8R. 12 A Snubberless Triac. Description. Features. Applications
12 A Snubberless Triac Datasheet - production data Features A2 G I²PAK 12 A medium current Triac Three triggering quadrants device Very high noise immunity and dynamic commutation ECOPACK 2 compliant component
T Phase Control Thyristor
The T820 is a high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various phase control applications.
Triacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 THERMOTAB TO-22AB TO - 92 TO-22AB G Triacs (.8 25 ) 2 General Description These gated triacs from Teccor Electronics are part of a broad line of bidirectional
NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays
FEATURES/BENEFITS Zero-cross models for resistive loads Low zero-cross turn-on voltage Input protection and control LED standard IP20 touch-proof flaps optional Connectors for power wiring and heat sinks
77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays
Series - Modular Solid State Relay 5 A 77 Features 77.01.x.xxx.8050 77.01.x.xxx.8051 5 A modular SSR, 1 NO output 17.5 mm housing 60 to 240 V AC output (with back to back SCR) 5 kv (1.2/50 μs) insulation
T12M50T600B TRIACS 12 AMPERES RMS 600 VOLTS. Triacs Sillicon Bidirectional Thyristors TO-220AB FEATURES MECHANICAL DATA
LITE-ON SEMICONDUCTOR Triacs Sillicon Bidirectional Thyristors TRIACS 12 AMPERES RMS VOLTS FEATURES Blocking Voltage to Volts On-state Current Rating of 12 Amperes RMS at 9 Uniform Gate Trigger Currents
PRODUCT DATASHEET. is brought to you by. SOS electronic distribution of electronic components
PRODUCT DATASHEET is brought to you by SOS electronic distribution of electronic components Click to view availability, pricing and lifecycle information. Visit https://www.soselectronic.com/ Datasheet
MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (250/400 Volt Peak)
MOC3010M, MOC3011M, MOC301M, MOC300M, MOC301M, MOC30M, MOC303M 6-Pin DIP Random-Phase Triac Driver Output Optocoupler (0/400 Volt Peak) Features Excellent I FT Stability IR Emitting Diode Has Low Degradation
MAC210A8, MAC210A10. Thyristors. Surface Mount 400V - 800V > MAC210A8, MAC210A10. Description
MAC210A8, MAC210A10 Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full wave silicon gate
T9S0 Phase Control Thyristor
The T9S0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
SECTION 2 SOLID STATE RELAYS (SSR) 2.5 TO 125 AMPERES
Your Contact for Relays SECTION 2 SOLID STATE RELAYS (SSR) 2.5 TO 125 AMPERES SSRDIN 6 (AS) SOLID STATE RELAYS 6 (DS) RELAY SERIES L.E.D. STATUS LAMP L.E.D. STATUS LAMP L.E.D. STATUS LAMP FEATURES L W
Sensitive Triacs. ( Amps) Features
Selected Packages* U.L. RECOGNIZED File #E71639 TO - 92 THERMOTAB TO-22AB TO-22AB G Sensitive Triacs (.8 8. ) 11 General Description Teccor's line of sensitive gate triacs includes devices with current
Optocoupler, Phototriac Output, Zero Crossing, High dv/dt, Low Input Current
2842- Optocoupler, Phototriac Output, Zero Crossing, i793_4 A DESCRIPTION The IL4 and IL48 consists of a GaAs IRLED optically coupled to a photosensitive zero crossing TRIAC network. The TRIAC consists
ACS108-8TN. Overvoltage protected AC switch (ACS TM )
ACS108-8TN Overvoltage protected AC switch (ACS TM ) Datasheet - production data CO M SOT-223 G CO M OU T Description The ACS108-8TN belongs to the AC switch range (built with A.S.D. technology). This
MOC3009 THRU MOC3012 OPTOCOUPLERS/OPTOISOLATORS
5 V Phototriac Driver Output Gallium-Arsenide-Diode Infrared Source and Optically Coupled Silicon Traic Driver (Bilateral Switch) UL Recognized...File Number E585 High Isolation...75 V Peak Output Driver
Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q612LTH1LED Series RoHS Agency Approval Agency Agency File Number Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC
T9G Phase Control Thyristor
The T9G0 SCR employs a Center Fired amplifying gate structure which allows the SCR to be reliably operated at high di/dt and high dv/dt conditions in phase control applications. FEATURES: Low On-State
MCR69-2, MCR69-3. Thyristors. Surface Mount V > MCR69-2, MCR69-3. Description. Designed for overvoltage protection in crowbar circuits.
1 2 3 Thyristors MCR69-2, MCR69-3 Pb Description Designed for overvoltage protection in crowbar circuits. Features Glass-Passivated Junctions for Greater Parameter Stability and Reliability Center-Gate
2N6071A/B Series. Thyristors. Surface Mount 200V-600W > 2N6071A/B Series. Description
2N6071A/B Series Pb Description Designed primarily for full-wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full-wave silicon gate
Teccor brand Thyristors 4 / 6 / 8 / 10 / 15 Amp Quadracs
QxxxxLTx Series RoHS Description The Quadrac is an internally triggered Triac designed for AC switching and phase control applications. It is a Triac and DIAC in a single package, which saves user expense
MOC3051M, MOC3052M 6-Pin DIP Random-Phase Optoisolators Triac Drivers (600 Volt Peak)
MOC3051M, MOC3052M 6-Pin DIP Random-Phase Optoisolators Triac Drivers (600 Volt Peak) Features Excellent I FT Stability IR Emitting Diode Has Low Degradation 600 V Peak Blocking Voltage Safety and Regulatory
MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250/400 Volt Peak)
March 2014 MOC3010M, MOC3011M, MOC3012M, MOC3020M, MOC3021M, MOC3022M, MOC3023M 6-Pin DIP Random-Phase Optoisolators Triac Driver Output (250/400 Volt Peak) Features Excellent I FT Stability IR Emitting
MOC3061M, MOC3062M, MOC3063M, MOC3162M, MOC3163M 6-Pin DIP Zero-Cross Phototriac Driver Optocoupler (600 Volt Peak)
MOC30M, MOC30M, MOC303M, MOC3M, MOC33M -Pin DIP Zero-Cross Phototriac Driver Optocoupler (00 Volt Peak) Features Simplifies logic control of 5/40 VAC power Zero voltage crossing dv/dt of 000V/µs guaranteed
MOC3020 THRU MOC3023 OPTOCOUPLERS/OPTOISOLATORS
MOC300 THRU MOC303 SOES05A OCTOBER 98 REVISED APRIL 998 00 V Phototriac Driver Output Gallium-Arsenide-Diode Infrared Source and Optically-Coupled Silicon Traic Driver (Bilateral Switch) UL Recognized...
Optocoupler, Phototriac Output, Zero Crossing, Very Low Input Current
2842- IL46, IL47, IL48 Optocoupler, Phototriac Output, Zero Crossing, Very Low Input Current i793_4 DESCRIPTION The IL46, IL47, and IL48 consists of an AlGaAs IRLED optically coupled to a photosensitive
MAC12D, MAC12M, MAC12N
MAC12D, MAC12M, MAC12N Pb Description Designed for high performance full wave ac control applications where high noise immunity and commutating di/dt are required. Features Blocking Voltage to 800 Volts
T8M35T-B SERIES TRIACS 8 AMPERES RMS 600 VOLTS. Triacs Sillicon Bidirectional Thyristors TO-220AB FEATURES MECHANICAL DATA
LITE-ON SEMICONDUCTOR Triacs Sillicon Bidirectional Thyristors TRIACS 8 AMPERES RMS 600 VOLTS FEATURES Blocking Voltage to 600 Volts On-State Current Rating of 8.0 Amperes RMS at 0 Uniform Gate Trigger
6-PIN DIP RANDOM-PHASE OPTOISOLATORS TRIAC DRIVERS (600 VOLT PEAK)
PACKAGE SCHEMATIC 6 6 ANODE CATHODE 2 6 MAIN TERM. 5 NC* N/C 3 4 MAIN TERM. 6 *DO NOT CONNECT (TRIAC SUBSTRATE) DESCRIPTION The and consist of a AlGaAs infrared emitting diode optically coupled to a non-zero-crossing
celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac
Power Solid State Relay With Analog Control, pitch 22.5mm compact size and DIN rail mounting. Ready to use Single-Phase Relay: Phase angle ler Transfer characterisic :Angle open loop Operating voltage
MCR12DG, MCR12MG, MCR12NG
MCR12DG, MCR12MG, MCR12NG Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half wave silicon gate controlled,
QJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
Semiconductor contactors, Solid-state relays
Semiconductor contactors, Solid-state relays Content Benefits and advantages, approvals... 224 R100.xx semiconductor contactors, single-phase Ordering details... 225 Technical data... 228 Dimensional drawings...
Series 7 Power Controllers
Series 7 DIN Rail Mount Power Devices Series 7 Power Devices put 12 to 80 Amps in a DIN rail mount package that provides precision machine control for heater bands, cartridge heaters, and other resistive
Intermediate Bus Converters Quarter-Brick, 48 Vin Family
PRELIMINARY 45 V I Chip TM VIC-in-a-Brick Features Up to 600 W 95% efficiency @ 3 Vdc 600 W @ 55ºC, 400 LFM 125 C operating temperature 400 W/in 3 power density 38-55 Vdc input range 100 V input surge
T835T-8I. 8 A Snubberless Triac
8 A Snubberless Triac Datasheet - production data Features High static dv/dt High dynamic commutation 150 C maximum Tj Three quadrants Built-in ceramic for tab insulation Compliance to UL1557 standard
RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
1phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
Description. Features. As low as 8mA max holding current. UL Recognized TO- 220AB package. 110 C rated junction temperature
Q6012xH1LED Series RoHS Description Q6012LH1LED series is designed to meet low load current characteristics typical in LED lighting applications. By keeping holding current at 8mA maximum, this Triac series
T12M5T-B SERIES TRIACS 12 AMPERES RMS 600 VOLTS. Sensitive Gate Triacs Sillicon Bidirectional Thyristors FEATURES TO-220AB MECHANICAL DATA
LITE-ON SEMICONDUCTOR Sensitive Gate Triacs Sillicon Bidirectional Thyristors TRIACS 2 AMPERES RMS 600 VOLTS FEATURES Sensitive Gate Allows Triggering by Microcontrollers and other Blocking Voltage to
PS1201 AC Power Switch
AC Power Switch Parameter Rating Units AC Operating Voltage 12 V rms Load Current 1 A rms On-State Voltage Drop (I L =1A rms 1.2 V rms Features Load Current up to 1A rms (3A rms with heat sink Blocking
MCR08B, MCR08M. Thyristors. Surface Mount 600V - 800V > MCR08B, MCR08M G K. Description
MCR8B, MCR8M Pb Description PNPN devices designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection
Power-IO
E Family of Solid State Relays Up to 900 VDC switched 12-20 khz, FAST switching times for superior PWM performance Ultra Cool Technology trademarked thermal management design Green LED that indicates input
CAP6637A AC-DC Open Loop Converter
Description: The CAP6637 is a three-phase AC to DC Converter assembly. The assembly includes the three-phase SCR converter bridge, a free wheeling diode, the thermal management system, a BAP1950 SCR phase
Magnecraft Solid State Relays
Magnecraft Solid State Relays Catalog 2010 Contents Series Overview....................................................3 861 Relays........................................................4 861H Relays......................................................7
TCS4 340H Phase Control Thyristor
TCS4 340H The TCS4 is a high voltage, high current disc pack SCR employing a high di/dt gate structure. This gate design allows the SCR to be reliably operated at high di/dt and dv/dt conditions in various
RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description
phase PCB mount solid state relays Main features AC Solid State Relay for PCB mounting Zero switching or instanton Rated operational current: 3, 5 or 5.5 AACrms Rated operational voltage: Up to 480 VACrms
BTA16-600BW3G, BTA16-800BW3G,
BTA6-600BW3G, BTA6-800BW3G, Pb Description Designed for high performance full wave ac control applications where high noise immunity and high commutating di/dt are required. Features Blocking oltage to
RN Thyristor Controllers
Data Sheet RN Thyristor Controllers RN Thyristor Controllers Thyristor Controllers (solid state relays) provide a means of varying the voltage for electrically resistive s, typically electric heating elements.they
Application Note Vishay Semiconductors
FAQ of Phototriacs 11/10/2008 Application Note 1. What is static dv/dt?... 1 2. What are commutating dv/dt and commutating di/dt?... 1 3. Trigger current 2 (I FT2 ) of IL410... 2 4. Direct Driven Load
BTA08-800CW3G. Thyristors. Surface Mount 800V > BTA08-800CW3G. Description
BTA08-800CW3G Pb Description Designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supply crowbar circuits. Features Blocking oltage to 800 On-State
Legacy Schneider Electric Solid-State Relays. Catalog
Legacy Schneider Electric Solid-State Relays Catalog 2017 Contents Series Overview....................................................3 861 Relays........................................................4
Reverse Blocking Thyristors
Preferred Device Reverse Blocking Thyristors Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning
MCR12DSM, MCR12DSN. Thyristors. Surface Mount 100V -600V > MCR12DSM, MCR12DSN G K. Description
MCR12DSM, MCR12DSN Thyristors Description Designed for high volume, low cost, industrial and consumer applications such as motor control; process control; temperature, light and speed control; CDI (Capacitive
TM8050H-8W. 80 A high temperature Thyristor (SCR) Applications
80 A high temperature Thyristor (SCR) Datasheet - production data G TAB = A A K Applications Solid state switch Battery charging system Variable speed motor drive Industrial welding systems AC-DC rectifier
Series CD. 2A, 60Vdc Optically Isolated, Short-Circuit Protected DC Solid-State Relay ELECTRICAL SPECIFICATIONS
2A, 60Vdc Optically Isolated, Short-Circuit Protected DC Solid-State Relay Part* DESC Drawing Relay Description Number Number CD00CFW Basic Solid-State Relay (SSR) CD00CFY 90091-008 CD01CFW SSR with Control
BTA12, BTB12, T12xx. 12 A Snubberless, logic level and standard Triacs. Applications. Description. Features
12 A Snubberless, logic level and standard Triacs Datasheet - production data Applications ON/OFF or phase angle function in applications such as static relays, light dimmers and appliance motors speed
POW-R-BLOK TM Dual SCR Isolated Module 500 Amperes / Up to 1600 Volts. LD43 50 Dual SCR POW-R-BLOK TM Module 500 Amperes / Volts
mperes / Up to 16 Volts R OUTLINE DRWING B C J F 1 3 L H Q - DI. (4 TYP.) P - M1 THD (3 TYP.) T - (4 TYP.) S 4 7 5 6 E K M G D LD43 5 Dual SCR Module mperes / 8-16 Volts LD43 Outline Dimensions Dimension
Description 575D30-HS. 575Di MP120D2 or P120D2 MP120D4 or P120D4 MP240D2 or P240D2 MP240D4 or P240D4. DC60P or DC60MP DC200P or DC200MP
Features Rugged, epoxy encapsulation construction 4,000 volts of optical isolation Subjected to full load test and six times the rated current surge before and after encapsulation Unique heat-spreader
T3035H-8I. 30 A V TO-220AB insulated H-series Snubberless Triac. Datasheet. Features. Applications. Description. TO-220AB insulated
Datasheet 3 A - 8 V TO-22AB insulated H-series Snubberless Triac G A2 A1 Features 3 A high current Triac 8 V symmetrical blocking voltage 15 C maximum junction temperature T j Three triggering quadrants
Optocoupler, Phototriac Output, High dv/dt, Low Input Current
IL42, IL428 Optocoupler, Phototriac Output, High dv/dt, Low Input Current A 6 MT2 FEATURES High input sensitivity I FT = 2 ma C 2 NC 6 V, 8 V blocking voltage 2842- NC i793_2 3 4 V D E MT 3 ma on-state
2 Amp Zero Cross Triac Output
SEMICONDUCTOR TECHNICAL DATA Order this document by MOC2A60 /D 2 Amp Zero Cross Triac Output This device consists of a gallium arsenide infrared emitting diode optically coupled to a zero cross triac driver
Features: Phase A Phase B Phase C -DC_A -DC_B -DC_C
Three Phase Inverter Power Stage Description: The SixPac TM from Applied Power Systems is a configurable IGBT based power stage that is configured as a three-phase bridge inverter for motor control, power
CR02AM-8. Thyristor. Low Power Use. Features. Outline. Applications. Maximum Ratings. REJ03G Rev.1.00 Mar
Thyristor Low Power Use REJG4- Rev.. Mar.8. Features I T (AV) :. A V DRM : 4 V I GT : µa Planar Passivation Type Completed Pb free product Outline RENESAS Package code: PRSSDE-A (Package name: TO-9()).
Samples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
P o w e r. C O N T R O L S A N D a t h e n a c o n t r o l s. c o m. ATHENA CONTROLS, INC Campus Drive Plymouth Meeting, PA U.S.A.
P o w e r C O N T R O L S A N D a t h e n a c o n t r o l s. c o m ATHENA CONTROLS, INC. 5145 Campus Drive Plymouth Meeting, PA 19462-1129 U.S.A. TABLE OF CONTENTS Model Page Series 19/39 1 and Zero-Switched
Industrial, 2-Pole ZS Type RA2A
Solid State Relays Industrial, 2-Pole ZS Type 2-Pole AC Solid State Relay Zero switching For resistive and inductive AC loads Direct copper bonding (DCB) technology LED indication Rated operational current:
PINNING - SOT186A PIN CONFIGURATION SYMBOL. case
BTA8X series B GENERAL DESCRIPTION QUICK REFERENCE DATA Glass passivated SYMBOL PARAMETER MAX. MAX. MAX. UNIT triacs in a full pack, plastic envelope intended for use in motor control BTA8X- 5B 6B 8B circuits