Varistor Products Radial Lead Varistors > LA Series
|
|
- Prudence Gaines
- 5 years ago
- Views:
Transcription
1 RoHS Agency Approvals Agency Agency File Number 7596, 5659, 3 Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) that are designed to be operated continuously across AC power lines. These UL recognized varistors require very little mounting space, and are offered in various standard lead form options. The varistors are available in four model sizes: 7mm, mm, 4mm and 0mm; and have a V M(AC)RMS voltage range from 30V to 00V, and an energy absorption capability up to 360J. Some model numbers are available with clamping voltage selections, designated by a model number suffix of either A or B. The 'A' selection is the standard model; the 'B' selection provides a lower clamping voltage. See Device Ratings and Specifications Table for part number and brand information Features LR compliant option available. lease see the device and ratings specifications table for more information. voltage range V M(AC)RMS 30V to 00V 85ºC ambient capability (W TM ) up to 360J reel or bulk pack Absolute Maximum Ratings Continuous Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS ) 30 to 00 V DC Voltage Range (V M(DC) ) 75 to V Transients: eak ulse Current (I TM ) For 8/0μs Current Wave (See Figure ) to 6 A Single ulse nergy Range For /00μs Current Wave (W TM ) to 360 J Operating Ambient Temperature Range (T A ) -55 to +85 O C Storage Temperature Range (T STG ) -55 to +5 O C Temperature Coefficient (a V ) of Clamping Voltage (V C ) at Specified Test Current <0.0 %/ O C Hi-ot ncapsulation (COATING Isolation Voltage Capability) (Dielectric must withstand indicated DC voltage for one minute per MIL-STD 0, Method 30) V COATING Insulation Resistance 00 MΩ CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the device. This is a stress only rating and operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. 8 Littelfuse, Inc. Revision: January 9, 9
2 Ratings & Specifications Lead free and RoHS Compliant Models Standard Models Model Size Disc Dia. (mm) Maximum Rating (85 C) Specifications (5 C) Continuous Transient Varistor Maximum Typical Voltage at nergy eak Clamping Capacitance f = ma V Voltage RMS V DC x Current DC Test 00μs 8 x 0μs 8 x 0 μs MHz Current art art V Branding Branding M(AC) V M(DC) W TM I TM V Min Max C I K C Number Number (V) (V) (J) (A) (V) (V) (V) (A) (pf) V30LA 30 V30LA V30LA 30 V30LA V30LA5 305 V30LA V30LAA 30L V30LAA 30L V30LA0A 30L0 30LA0A 30L V30LA0B 30L0B V30LA0B 30L0B V40LA 40 V40LA V40LA5 405 V40LA V40LAA 40L V40LAA 40L V40LA0A 40L0 V40LA0A 40L VLA VLA VLA VLA VLA5 5 VLA VLAA L VLAA L VLA0A L0 VLA0A L VLA0B L0B VLA0B L0B V75LA 75 V75LA V75LA5 755 V75LA V75LAA 75L V75LAA 75L V75LA0A 75L0 V75LA0A 75L V30LA4 304 V30LA V30LA 30L V30LA 30L V30LA0A 30L0 V30LA0A 30L V30LA40A 30L40 V30LA40A 30L VLA VLA VLA4 4 VLA VLA L VLA L VLA0A L0 VLA0A L VLA40A L40 VLA40A L VLA40B L40B VLA40B L40B V75LA 75 V75LA V75LA4 754 V75LA V75LA 75L V75LA 75L V75LA0A 75L0 V75LA0A 75L V75LA40A 75L40 V75LA40A 75L V75LA40B 75L40B V75LA40B 75L40B VLA VLA VLA4 4 VLA VLA L VLA L VLA0A L0 VLA0A L VLA40A L40 VLA40A L V30LA7 307 V30LA V30LA 30L V30LA 30L V30LA0A 30L0 V30LA0A 30L V30LA40B 30L40 V30LA40B 30L V385LA V385LA V385LA 385L V385LA 385L V385LA0A 385L0 V385LA0A 385L V NOM V NOM Revision: January 9, 9 8 Littelfuse, Inc.
3 Ratings & Specifications (Continued...) Lead free and RoHS Compliant Models Standard Models Model Size Disc Dia. (mm) Maximum Rating (85 C) Specifications (5 C) Continuous Transient Varistor Maximum Typical Voltage at nergy eak Clamping Capacitance f = ma V Voltage RMS V DC x Current DC Test 00μs 8 x 0μs 8 x 0 μs MHz Current art art V Branding Branding M(AC) V M(DC) W TM I TM V Min Max C I K C Number Number (V) (V) (J) (A) (V) (V) (V) (A) (pf) V385LA40B 385L40 V385LA40B 385L V40LA7 407 V40LA V40LA 40L V40LA 40L V40LA0A 40L0 V40LA0A 40L V40LA40B 40L40 V40LA40B 40L V460LA V460LA V480LA V480LA V480LA 480L V480LA 480L V480LA40A 480L40 V480LA40A 480L V480LA80B 480L80 V480LA80B 480L V5LA 5L V5LA 5L V5LA40A 5L40 V5LA40A 5L V5LA80B 5L80 V5LA80B 5L V575LA 575L V575LA 575L V575LA40A 575L40 V575LA40A 575L V575LA80B 575L80 V575LA80B 575L V65LA 65L V65LA 65L V65LA40A 65L40 V65LA40A 65L V65LA80B 65L80 V65LA80B 65L V680LA 680L V680LA 680L V680LA80A 680L80 V680LA80A 680L V680LA0B 680L0 V680LA0B 680L V660LA 660L V660LA 660L V660LAA 660L V660LAA 660L V660LA0B 660L0 V660LA0B 660L V00LA80A 00L8 V00LA80A 00L V00LA60B 00L6 V00LA60B 00L V NOM V NOM NOT: Average power dissipation of transients not to exceed 0.5W, 0.4W, 0.6W or W for model sizes 7mm, mm, 4mm and 0mm, respectively. 8 Littelfuse, Inc. 3 Revision: January 9, 9
4 ower Dissipation Ratings eak ulse Current Test Waveform Should transients occur in rapid succession, the average power dissipation is the energy (watt-seconds) per pulse times the number of pulses per second. The power so developed must be within the specifications shown on the Device Ratings and Specifications Table for the specific device.the operating values of a MOV need to be derated at high temperatures as shown in the diagram below. Because varistors only dissipate a relatively small amount of average power they are not suitable for repetitive applications that involve substantial amounts of average power dissipation. RCNT OF AK VALU 0 90 Current nergy and ower Derating Curve Figure O TT T TIM RCNT OF RATD VALU Figure AMBINT TMRATUR ( o C) 0 = Virtual Origin of Wave T = Time from % to 90% of eak T = Rise Time =.5 x T T = Decay Time xample - For an 8/0 μs Current Waveform: 8μs = T = Rise Time 0μs = T = Decay Time 4 Revision: January 9, 9 8 Littelfuse, Inc.
5 Transient V-I Characteristics Curves ulse Rating Curves Maximum Clamping Voltage for 7mm arts V30LA() - VLA() Repetitive Surge Capability for 7mm arts V30LA() - V480LA7() 6,000 MODL SIZ 7mm MODL SIZ 7mm 4, TO V M(AC) RATING V30LA() - V480LA7() V75LA() 0 6 VLA() VLA() VLA() 5 INDFINIT V30LA() IMULS DURATION (μs) Figure 3 Figure 4,000 V30LA() - VLA4() SURG CURRNT (A) 4, MODL SIZ 7mm 30 TO V M(AC) RATING VLA4() V75LA4() VLA4() V30LA4() V75LA() VLA() V40LA() V30LA() Figure 5 V30LA7() - V480LA7() MODL SIZ 7mm 30 TO 480V M(AC) RATING Figure 6 V460LA7() V480LA7() V40LA7() V385LA7() V30LA7() Littelfuse, Inc. 5 Revision: January 9, 9
6 Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for mm arts V30LA5() - V40LA() 6,000 4,000 MODL SIZ mm 30 TO 40V M(AC) RATING V75LA() VLA() V30LA() V40LA() V75LA5() VLA5() V40LA5() V30LA5() Figure 7 Repetitive Surge Capability for mm arts V30LA5() - V680LA() SURG CURRNT (A) MODL SIZ mm V30LA5() - V680LA() INDFINIT 0 0,000 Figure 8 IMULS DURATION (μs) VLA() - V680LA() MODL SIZ mm TO 680V M(AC) RATING Figure 9 VLA() V30LA() V65LA() V660LA() V680LA() V575LA() V5LA() V480LA() V385LA() Revision: January 9, 9 8 Littelfuse, Inc.
7 Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for 4mm arts Repetitive Surge Capability for 4mm arts V30LAA() - V30LA0A 6,000 MODL SIZ 4mm MODL SIZ 4mm 4, TO 30V M(AC) RATING V30LAA() - V30LA0A() 3 4 V75LA0A() 5 VLA0A() VLA0A() V30LA0A() V30LA0A() V75LAA() 0 INDFINIT VLAA() V40LAA() 5 V30LAA() ,000 IMULS DURATION (μs) Figure Figure V30LAA() - V30LA0A() SURG CURRNT (A) V385LA0A() V00LA80A() V385LA0A() - V00LA80A() V660LAA() V65LA40A() MODL SIZ 4mm 385 TO 00V M(AC) RATING V00LA80A() V680LA80A() 0 V575LA40A() V5LA40A() INDFINIT V480LA40A() V40LA0A() IMULS DURATION (μs) Figure Figure 3 V385LA0A(),000 SURG CURRNT (A) MODL SIZ 4mm V385LA0A() - V00LA80A() 8 Littelfuse, Inc. 7 Revision: January 9, 9
8 Transient V-I Characteristics Curves (Continued...) ulse Rating Curves (Continued...) Maximum Clamping Voltage for 0mm arts V30LA0A() - V75LA40A() MODL SIZ 0mm 30 TO 75V M(AC) RATING V75LA40A() VLA40A() V75LA0A() VLA40A - V00LA60B VLA0A() V30LA0A() Figure 4 Figure 5 MODL SIZ 0mm TO 00V M(AC) RATING V65LA80B() V660LA0B() V575LA80B() V5LA80B() V480LA80B() V680LA0B() V00LA60B() V40LA40B() V385LA40B() V30LA40B() VLA40A() V30LA0B() - V75LA40() V30LA0A() - V75LA40A() V30LA0B() Figure 6 Figure 7 MODL SIZ 0mm 30 TO 75V M(AC) RATING V75LA40B() VLA40B() VLA0B() MODL SIZ 0mm 40 TO 30V M(AC) RATING V30LA40A() V40LA0A() Repetitive Surge Capability for 0mm arts V30LA0A() - V30LA40B(),000 MODL SIZ 0mm V30LA0A() - V30LA40B() INDFINIT 5 SURG CURRNT (A) 0 0,000 Figure 8 IMULS DURATION (μs) V385LA40B() - V00LA60B(),000 MODL SIZ 0mm V385LA40B() - V00LA60B() INDFINIT 5 SURG CURRNT (A) 0 0,000 Figure 9 IMULS DURATION (μs) NOT: If pulse ratings are exceeded, a shift of V N(DC) (at specified current) of more than +/-% could result. This type of shift, which normally results in a decrease of V N(DC), may result in the device not meeting the original published specifications, but does not prevent the device from continuing to function, and to provide ample protection. 8 Revision: January 9, 9 8 Littelfuse, Inc.
9 Wave Solder rofile Non Lead free rofile Lead free rofile Maximum Wave 40C Maximum Wave 60C TMRATUR (ºC) 0 TMRATUR (ºC) Figure 0 TIM(MINUTS) Figure TIM(MINUTS) hysical Specifications nvironmental Specifications Lead Material Tin Coated Copper Wire Operating Ambient Temperature Range -55 C to +85 C Soldering Characteristics Solderability per MIL STD 0, Method 08 Storage Temperature Range -55 C to +5 C Insulating Material Device Labeling Cured, flame retardant epoxy polymer meets UL94V 0 requirements Marked with LF, voltage, UL/CSA logos, and date code Humidity Aging Thermal Shock +85 C, 85% RH, 00 hours +/-% typical voltage change +85 C to -40 C 5 times +/-% typical voltage change Solvent Resistance MIL STD 0, Method 5F Moisture Sensitivity Level, J STD 00C 8 Littelfuse, Inc. 9 Revision: January 9, 9
10 Varistors for Hi-Temperature Operating Conditions: ncapsulation (Isolation Voltage Capability) = V. roduct Dimensions (mm) *SATING LAN A TRIM L TRIM CRIMD AND TRIMMD LAD Crimped leads are standard on LA types supplied in tape and reel and are denoted by the model letter "T." Model letter "S" denotes straight leads and letter "U" denotes special under-crimped leads. *Seating plane interpretation per IC-77 Dimension V RMS Voltage Model Min. 7mm Size mm Size 4mm Size 0mm Size Max. Min. Max. Min. Max. Min. Max. V30LA A V30LA - (0.47) - (0.630) - (0.787) - (.043) V385LA V00LA - (0.05) - (0.689) - (0.807) - (.) ØD All - 9 (0.354) -.5 (0.49) - 7 (0.669) - 3 (0.906) e All 4 (0.57) 6 (0.36) 6.5 (0.56) 8.5 (0.335) 6.5 (0.56) 8.5 (0.335) e Øb 6.5 (0.56) (Note ) 8.5 (Note ) V30LA V30LA (0.059) (0.38) (0.059) (0.38) (0.059) (0.38) (0.059) (0.38) V385LA V00LA (0.098) (0.7) (0.098) (0.7) (0.098) (0.7) (0.098) (0.7) V30LA V30LA - (0.0) - (0.0) - (0.0) - (0.0) V385LA V5LA - (0.87) - (0.87) - (0.87) - (0.87) V5LA V680LA - (0.37) - (0.37) - (0.37) - (0.37) V00LA (0.45) -.8 (0.45) All (Note 3) (0.03) (0.07) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) 0.86 (0.034) 0.76 (0.030) (Note ) 0.86 (0.034) (Note ) A TRIM All - 5 (0.59) (0.768) -.5 (0.886) (NOT 4) (.4) L TRIM All.4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85).4 (0.095) 4.69 (0.85) Notes :. Dimensions in millimeters, (inches) in parentheses.. mm (9mm Min. & mm Max.) ALSO AVAILABL; see additional lead style options 3. 00V parts supplied with lead wire of diameter.00 -/ ( /+ 0.00) 4. 'A' Max. for V00LC80A () = 4.00 (0.945 ) 0 Revision: January 9, 9 8 Littelfuse, Inc.
11 Tape and Reel Specifications (Dimensions presented on following page.) 7mm Devices, 4 and 0mm Devices CRIMD LADS "LT" CRIMD LADS "LT" H SATING LAN C H SATING LAN C H0 Db W0 W W H0 Db W0 W W W W DD0 DD0 0 F t F t STRAIGHT LADS "LS" STRAIGHT LADS "LS" H H H Db W0 W W H Db W0 W W W W DD0 DD0 0 F t 0 F t UNDR-CRIMD LADS "LU" UNDR-CRIMD LADS "LU" H U H U Ho Db W0 W W Ho Db W0 W W W W DD0 DD0 0 F t 0 F t 8 Littelfuse, Inc. Revision: January 9, 9
12 Tape and Reel Specifications (continued) Symbol Description Model Size 7mm mm 4mm 0mm itch of Component.7 +/ / / /-.0 0 Feed Hole itch.7 +/ / / /- 0. Feed Hole Center to itch / / / /- 0.7 Hole Center to Component Center / / / /- 0.7 F Lead to Lead Distance 5.0 +/ / / /- 0.8 h Component Alignment.0 Max.0 Max.0 Max.0 Max W Tape Width / / / / -0.5 W 0 Hold Down Tape Width.0 +/ / / /- 0.3 W Hole osition / / / / -0. W Hold Down Tape osition 0.5 Max 0.5 Max 0.5 Max 0.5 Max H Height from Tape Center to Component Base / / / / -0.0 H 0 Seating lane Height 6.0 +/ / / /- 0.5 H Component Height 3.0 Max 36.0 Max 40.0 Max 46.5 Max D 0 Feed Hole Diameter 4.0 +/ / / /- 0. T Total Tape Thickness 0.7 +/ / / /- 0. U Under-crimp Width 8.0 Max 8.0 Max 8.0 Max 8.0 Max Component Alignment 3 Max.00mm 3 Max.00mm 3 Max.00mm 3 Max NOT: Dimensions are in mm. Standard Bulk ack Quantity Standard Bulk ack Quantity Varistor Voltage Model Varistor Model Size 7mm mm 4mm 0mm N/A N/A N/A N/A Revision: January 9, 9 8 Littelfuse, Inc.
13 art Numbering System BAS ART CODS (See Ratings & Specifications tables and notes below) OTION CODS (See notes below) V XXXX LA XX X XXXXX For VARISTOR V M(AC) (Three or four digits -- 30V to V) SRIS + ACKAGING / LAD STYL DSIGNATOR (See BAS ART CODS notes below) LA = Bulk ack / Straight Leads (standard) LC = Bulk ack / Crimped and Trimmed Leads LS = Tape and Reel / Straight Leads LT = Tape and Reel / Crimped Leads LU = Tape and Reel / Under-Crimped Leads RLATIV NRGY INDICATOR (One or Two Digits) CLAM VOLTAG VARIANT (One digit, where applicable) See OTIONS CODS notes below : LAD-FR AND RoHS COMLIANT OTION For standard parts, use the BAS ART designator only. For parts with non-standard options (such as additional form, packaging and lead space options), use BAS ART + OTION COD. OTION COD items are subject to availability and minimum order requirements. lease contact a Littelfuse products representative for additional information or questions Ordering Notes: BAS ART CODS: Series + ackaging / Lead Style Designators: Ordering examples: Straight Lead Bulk ack (standard) Straight Lead Tape & Reel Crimped Lead Tape & Reel Crimped & Trimmed Lead Bulk ack Under- Crimp Lead Tape & Reel V30LA V30LS V30LT V30LC V30LU Crimped leads are standard on varistors supplied in tape and reel, denoted with "LT." For crimped leads without trimming and any varitions other than that described above, please contact Littelfuse. OTION CODS: X: MM LAD SACING OTION -- For (-/+) mm lead spacing (available on 0mm diameter models only), append standard model BAS ART number with "X." xample: Standard Model V30LA0A Order As V30LA0AX X855: Nickel Barrier COATD WIR OTION -- All standard parts use Tin coated Copper wire. Nickel Barrier coated wire is available as an option, consisting of Copper wire with a flashing of Nickel followed by a top coating of Tin. To order append standard model BAS ART number with "X855." xample: Lead free / RoHS Designator: For Lead free and RoHS compliant parts add "" after the BAS ART number and before any other OTION COD: Standard Model V30LA Order As V30LA Standard Model V30LA0A Order As V30LA0AX855 Littelfuse varistors are shipped standard in bulk pack with straight leads and lead spacing outlined in the ackage Dimensions section of this data sheet. Contact your Littelfuse sales representative to discuss non-standard options. Standard Model with Option V40LA0AX347 Order As V40LA0AX347 8 Littelfuse, Inc. 3 Revision: January 9, 9
Varistor Products Radial Lead Varistors > ZA Series
RoHS Description The of transient voltage surge suppressors are radial leaded varistors (MOVs) designed for use in the protection of low and medium-voltage circuits and systems. Typical applications include
More informationContinuous C-III Series Units. ) 2ms Rectangular Wave 40 to 530 J Operating Ambient Temperature Range (T A
RoHS Description The C-III Series of Metal-Oxide Varistors (MOVs) are specifically designed for applications requiring high surge energy absorption ratings and superior multiple pulse absorption rating.
More informationMetal-Oxide Varistors (MOVs) Radial Lead Varistors > TMOV 25S Varistor Series
TMOV 25S Varistor Series RoHS Description Metal Oxide Varistors (MOVs) are rated for specific AC line operating voltages, and exceeding these limits through the application of a sustained abnormal over-voltage
More informationDescription. Features. Continuous BA Series BB Series Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS
BA/BB Varistor Series RoHS Description The BA and transient surge suppressors are heavy-duty industrial Metal-Oxide Varistors (MOVs) designed to provide surge protection for motor controls and power supplies
More informationMetal-Oxide Varistors (MOVs) Thermally Protected Varistors > SMOV 25S Varistor Series
S25S Varistor Series RoHS Description The Littelfuse S 25S thermally protected varistor is a self-protected device. It consists of a 25mm square varistor with an integral thermal designed to open in the
More informationSamples. Continuous MA Series Units Steady State Applied Voltage: AC Voltage Range (V M(AC)RMS. ) 9 to 264 V DC Voltage Range (V M(DC)
Axial ead / Application Specific Varistors > MA Series MA Varistor Series RoHS Description The MA Series of transient surge suppressors are axial lead Metal Oxide Varistors (MOVs) for use in a wide variety
More informationTransient Voltage Suppression Diodes Axial Leaded 500W > SA series
Axial Leaded 5W > SA series RoHS b Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Agency
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. Q2L Series - 3x3 QFN. Description
Q2L Series - 3x3 QN RoHS Pb e3 Description Q2L Series 3x3 QN are low capacitance SIDACtor thyristors designed to protect high density broadband equipment from damaging overvoltage transients. The series
More informationFeatures. Samples. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. = 2 x I GT. Peak gate current t p. = 10 μs T J
L01 Series RoHS Description New 1 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors High Energy Bidirectional SIDACs
Kxxx0yH Series RoHS Description The new Kxxx0yH is a higher energy SIDAC switch for gas ignition applications requiring higher current pulse current especially at low repetition rate. It is offered in
More informationApplications R74 5 F 1100 AA H0 J
Polypropylene Pulse/High Frequency Capacitors R74 125 C Single Metallized Polypropylene Film, Radial, AC Applications (Automotive Grade) Overview The R74 125 C is constructed of metallized polypropylene
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) PRIMARY CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0 µa T J
More informationType 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion
Radial Box Metallized Polyester Capacitors for Automatic Insertion Specifications Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric Withstand Voltage: Dissipation
More informationt p = 10 ms T j initial = T amb
TRANSIL FEATURES Peak pulse power: 6 W (1/ µs ) Stand-off voltage range 6.8 to 44V Unidirectional and Bidirectional types Low clamping factor Fast response time UL recognized DESCRIPTION Transil diodes
More informationTeccor brand Protection Thyristors Surface Mount
Q2L Series (C-Rated) SIDACtor SLIC Device The Q2L SIDACtor SLIC series provides unidirectional transient voltage protection in a low profile, Chip Scale Package (CSP). The small package QFN (Quad Flatpak
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-4AL (DO-4) MAJOR RATINGS AND CHARACTERISTICS I F(AV).0 A V RRM V to 00 V I FSM (8.3 ms sine-wave) A I FSM (square wave t p = ms) 45 A V F. V I R 5.0
More informationMSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. New Product
MSP5.A Surface Mount TRANSZORB Transient Voltage Suppressors esmp TM Series Top View Bottom View MicroSMP PRIMARY CHARACTERISTICS V WM 5. V P PPM W I FSM 25 A T J max. 5 C FEATURES Very low profile - typical
More informationR L = 60 Ω. DC Gate Trigger Voltage. = 1 kω T J = 125 C = V DRM. / V RRM Exponential Waveform R GK I G. = 10mA PW = 15μsec I T. = 3.
S602ECS RoHS Description This new.8 A sensitive gate SCR in an TO-92 package with a GAK pin out, offers a high static component series with a high static dv/dt and a low turn off (t q ) time by the use
More informationP6SMB11AT3G Series. TVS Diodes. Surface Mount > 600W > P6SMB11AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
P6SMB11AT3G Series Pb Description The P6SMB11AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationSchottky Barrier Rectifiers
Schottky Barrier Rectifiers FEATURES Guardring for overvoltage protection Very small conduction losses Extremely fast switching Low forward voltage drop DO-204AL (DO-4) High frequency operation Solder
More informationDescription. Features & Benefits. RoHS compliant Glass passivated junctions. Applications. Additional Information. Datasheet
Sx01E & SxN1 Series RoHS Description Excellent for lower current heat, lamp, and audible alarm controls for home goods. Standard phase control SCRs are triggered with few milliamperes of current at less
More informationP6KE. Transil, transient voltage surge suppressor (TVS) Features. Description. Complies with the following standards
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 600 W (10/0 µs ) Stand-off voltage range 6.8 to 440 V Unidirectional and bidirectional types Low clamping
More informationPolypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications
Polypropylene Pulse/High Frequency Capacitors R79 Series Single Metallized Polypropylene Film, Radial, 5 mm Lead Spacing, Multipurpose Applications Overview The R79 Series is constructed of metallized
More informationTeccor brand Thyristors EV Series 0.8 Amp Sensitive Triacs
LX8 Series RoHS Description New 0.8 Amp bi-directional solid state switch series offering direct interface to microprocessor drivers in economical TO-92 and surface mount packages. The die voltage blocking
More informationTeccor brand Thyristors Silicon Controlled Rectifiers
Sx02xS EV Series Amp Sensitive SCR Description New Amp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. All SCR s junctions are
More information1.5SMC6.8AT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMC6.8AT3G. Bi-directional. Cathode. Anode. Uni-directional. Description
1.5SMC6.8AT3G Pb Description The 1.5SMC6.8AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationP6SMB6.8AT3G Series, SZP6SMB6.8AT3G Series. 600 Watt Peak Power Zener Transient Voltage Suppressors. Unidirectional*
P66.8AT3G Series, SZP66.8AT3G Series 600 Watt Peak Power Zener Transient Voltage Suppressors Unidirectional* The series is designed to protect voltage sensitive components from high voltage, high energy
More informationSamples. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV) Average on-state current T C
Sxx40x Series RoHS Description Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes
More informationTransient Voltage Suppressors (TVS) Data Sheet
Transient Suppressors (TVS) Data Sheet Features Glass passivated junction Low zener impedance Excellent clamping capability 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series PRIMARY CHARACTERISTICS V BR uni-directional 4. V to 44.2 V V WM 3.3 V to 36 V P PPM 400 W I FSM 40 A T J max. 150 C Polarity Uni-directional
More informationP4KE6.8A thru P4KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 54 V V BR bi-directional 6.8 V to 44 V P PPM 4 W P D 1.5 W I FSM (uni-directional only)
More informationMSP3V3, MSP5.0A. Surface Mount TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES. Series.
Surface Mount TRANSZORB Transient Voltage Suppressors esmp Series Top View Bottom View PRIMARY CHARACTERISTICS V WM 3.3 V to 5. V V BR 4.1 V to 7.7 V P PPM 15 W T J max. 15 C Polarity Uni-directional Package
More information1.5SMCxxAT3G. TVS Diodes. Surface Mount > 1500W > 1.5SMCxxAT3G. Cathode. Anode. Uni-directional. Description
1.5SMCxxAT3G Pb Description The 1.5SMCxxAT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge capability,
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.8 V to 220 V V WM 5.8 V to 188 V P PPM 600 W P D 5.0 W I FSM (uni-directional only) A T J max. 150 C Polarity Uni-directional,
More informationTeccor brand Thyristors 12 Amp Standard SCR. Symbol Parameter Test Conditions SRR6012x1 Unit I T(RMS) RMS on-state current T C
RoHS Description Excellent unidirectional switches for phase control and general switching applications such as heating, motor control controls, converters / rectifiers and capacitive discharge ignitions.
More informationGeneral Purpose Plastic Rectifier
General Purpose Plastic Rectifier N400 thru N4007 DO-204AL (DO-4) FEATURES Low forward voltage drop Low leakage current High forward surge capability Solder dip 275 C max. s, per JESD 22-B6 Compliant to
More information30KP SERIES. Features. Mechanical Data. Maximum Ratings and Electrical A =25 C unless otherwise specified
3KP SERIES 3W TRANSIENT VOLTAGE SUPPRESSOR Pb Features Glass Passivated Die Construction 3W Peak Pulse Power Dissipation 8V 88V Standoff Voltage A B A Uni- and Versions Available Excellent Clamping Voltage
More informationTeccor brand Thyristors 40 Amp Low T q SCR. Symbol Parameter Test Conditions Value Unit RMS on-state current T C = 100 C 40 A I T(AV)
RoHS Description The S4040xQx series of s offer fast turn-off time (tq) characteristics required for applications such as power inverters, switching regulator, and high frequency pulse circuits. These
More informationData Sheet. ASSR-4118, ASSR-4119 and ASSR Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35 ) Features. Description. Functional Diagram
ASSR-, ASSR-9 and ASSR- Form A, Solid State Relay (Photo MOSFET) (00V/0.0A/ ) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically coupled
More informationData Sheet. ASSR-1218, ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Features. Description. Functional Diagram
ASSR-8, ASSR-9 and ASSR-8 Form A, Solid State Relay (Photo MOSFET) (0V/0.A/0Ω) Data Sheet Description The ASSR-XX Series consists of an AlGaAs infrared light-emitting diode (LED) input stage optically
More informationQJxx16xHx Series. Thyristors 16 Amp High Temperature Alternistor Triacs. RoHS. Description
RoHS Description This 16A high temperature alternistor triac solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More information5KP8.5A thru 5KP188A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES TYPICAL APPLICATIONS
TRANSZORB Transient Voltage Suppressors P6 PRIMARY CHARACTERISTICS V WM 8.5 V to 188 V V BR 9.4 V to 231 V P PPM 5 W P D 8. W I FSM 5 A T J max. 175 C Polarity Uni-directional Package P6 FEATURES P6 glass
More informationTransient Voltage Suppression Diodes Axial Leaded 600W > P6KE series
Axial Leaded 6W > P6KE series RoHS Pb Description The is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DO-218 Compatible PRIMARY CHARACTERISTICS V BR 11.1 V to 52.8 V P PPM (1 x μs) 66 W P PPM (1 x
More informationKxxxzy SIDAC. Teccor brand Thyristors Standard Bidirectional SIDACs. Description
Kxxxzy SIDAC Description The SIDAC is a silicon bilateral voltage triggered switch. Upon application of a voltage exceeding the SIDAC breakover voltage point, the SIDAC switches on through a negative resistance
More information5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors
Available 5V 48V Small Footprint, Surface Mount Transient Voltage Suppressors DESCRIPTION Microsemi s unique and new Powermite UPT series of transient voltage suppressors feature oxidepassivated chips
More informationSZSMF5.0AT1G Series. TVS Diodes. Surface Mount > 200W > SZSMF5.0AT1G Series. Bi-directional. Cathode. Anode. Uni-directional.
Surface Mount > 2W > SZSMF5.ATG Series SZSMF5.ATG Series Pb Description The SZSMF5.ATG Series is designed to protect voltage sensitive components from high voltage, high energy transients. Excellent clamping
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1218 (Pb Free) 5%; 1% Product specification Oct 13, 2004 V.1
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%; 1% 2 SCOPE This specification describes 1218 series chip resistors with lead-free terminations made by thick film process. ORDERING INFORMATION Part number
More informationSP4040 Series 3.3V 75A Rail Clamp Array
3.3V 7A Rail Clamp Array RoHS Pb GREEN Description The SP4040 provides overvoltage protection for applications such as 0/00/000 Base-T Ethernet and T3/ E3 interfaces. This device has a low capacitance
More informationDistributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. P6KE6V8(C)A - P6KE4(C)A 6W TRANSIENT VOLTAGE SUPPRESSOR Features 6W Peak Pulse
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM (uni-directional) 5.8 V to 459 V V WM (bi-directional) 5.8 V to 185 V V BR (uni-directional) 6.8 V to 540 V V BR (bi-directional)
More informationSIDACtor Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor Balanced Series - MS-013. Description
SIDCtor Balanced Series - MS- RoHS Pb e Description The SIDCtor Balanced Series MS- are designed to protect baseband equipment from overvoltage transients. The patented Y configuration ensures balanced
More informationGENERAL PURPOSE CHIP RESISTORS RC0805 5%, 1%, 0.5%, 0.1% RoHS Compliant & Halogen Free.
GENERAL PURPOSE CHIP RESISTORS RC080 %, 1%, 0.%, 0.1% RoHS Compliant & Halogen Free Product specification - July 26, 2016 V0 SCOPE Chip Resistor Surface Mount RC SERIES 080 This specification describes
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
Compliant 15,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This device clamps dangerous high-voltage short-term transients such as those produced by the secondary effects of
More information15,000 Watt Transient Voltage Suppressor (TVS) Protection Device
M1KP22A M1KP280CA(e3) Available 1,000 Watt Transient Voltage Suppressor (TVS) Protection Device DESCRIPTION This Transient Voltage Suppressor series of M1KP22A M1KP280CA offers an extended voltage range
More informationGlass Passivated Junction Plastic Rectifier
N400GP, N4002GP, N4003GP, N4004GP, N4005GP, N4006GP, N4007GP Glass Passivated Junction Plastic Rectifier SUPERECTIFIER DO-204AL (DO-4) FEATURES Superectifier structure for high reliability application
More informationThyristors 12 Amp Alternistor (High Communitation) Triacs
Qxx12xHx Series RoHS Description This 12 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls,
More informationSurface Mount TRANSZORB Transient Voltage Suppressors
Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V WM 5.80 V to 188 V V BR uni-directional 6.8 V to 220 V V BR bi-directional 6.8 V to 220 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 (Pb Free) 5%, 1%
DATA SHEET GENERAL PURPOSE CHIP RESISTORS 5%, 1% Product specification Supersedes Date of Mar. 06, 2003 Product specification 2 SCOPE This specification describes 0603 series chip resistors with lead-free
More informationFEATURES. PARAMETER SYMBOL V8PAM10 UNIT Device marking code Maximum repetitive peak reverse voltage V RRM 100 V
Surface-Mount TMBS (Trench MOS Barrier Schottky) Rectifier esmp Series Top View Bottom View Anode Cathode FEATURES Very low profile - typical height of 0.95 mm Ideal for automated placement Trench MOS
More informationTeccor brand Thyristors Standard Bidirectional DIAC Trigger
Description The HTM, HT, and ST series of bilateral trigger DIACs offer a range of voltage characteristics from 27V to 70V. A DIAC semiconductor is a full-wave or bidirectional Thyristor. It is triggered
More informationSD Series 450W Discrete Unidirectional TVS Diode
General Purpose ESD Protection - 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The SD series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and
More informationHigh Power Density Surface Mount TRANSZORB Transient Voltage Suppressors
High Power Density Surface Mount TRANSZORB Transient Voltage Suppressors PRIMARY CHARACTERISTICS V BR 6.4 V to 49.1 V V WM 5.0 V to 40 V P PPM 0 W I FSM (uni-directional only) 40 A T J max. 1 C Polarity
More informationTransient Voltage Suppression Diodes. Surface Mount 400W > P4SMA series. Features. less than 1μA when V BR. Applications. Additional Infomarion
P4SMA Series RoHS Pb e3 Uni-directional Bi-directional Description The P4SMA series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other
More information30KP Series 30000W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR R-6 PACKAGE WILLAS ELECTRONIC CORP. R-6 (Cathode band Only Uui-polarity product)
3W AXIAL LEAD TRANSIENT VOLTAGE SUPPRESSOR 3KP Series 1.(25.4)MIN..36(9.14).338(8.6) 1.(25.4)MIN. R-6 (Cathode band Only Uui-polarity product).52(1.32).47(1.2) Dimensions in inches and (millimeters) DIA..36(9.14).338(8.6)
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC1206 5%, 1%, 0.5%, 0.1% Product specification June 25, 2014 V.5. RoHS compliant
Product specification June 25, 2014 V.5 1100 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 1206 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 SCOPE This specification describes 1206 series chip
More information1SMA5.0AT3G Series. TVS Diodes. Surface Mount > 400W > 1SMA5.0AT3G Series. Bi-directional. Cathode. Anode. Uni-directional.
SMA5.0AT3G Series Pb Description The SMA5.0AT3G series is designed to protect voltage sensitive components from high voltage, high energy transients. They have excellent clamping capability, high surge
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS SMPA TM Top View Bottom View DO-22BC (SMPA) PRIMARY CHARACTERISTICS I F(AV) 3.0 A V RRM 50 V I FSM 80 A V F at I F = 3.0 A (T A = 25 C) 0.40 V T
More informationP6SMB Series. TVS Diodes Surface Mount 600W > P6SMB series. Description. Uni-directional
RoHS Pb e3 Uni-directional Description Bi-directional The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient
More information6600W, 10V 43V Surface Mount Transient Voltage Suppressor
66W, 1V 43V Surface Mount Transient Voltage Suppressor FEATURES AEC-Q11 qualified Junction passivation optimized design technology T J =175 C capability suitable for high reliability and automotive requirement
More informationMetal Oxide Varistors
Straight Lead Dimensions Table Series 5D 7D 10D 14D 20D D max 7 9.5 14 17.5 24 d* 0.6 0.6 0.8 0.8 1 W** 5 5 7.5 7.5 10 H max 12.5 14.5 20 22.5 29.5 H1 max 10 12 17 20.5 28 T max 4.9 4.9 8.5 8.5 9 P max
More informationAQxx Series 450W Discrete Unidirectional TVS Diode
AQxx Series 5W Discrete Unidirectional TVS Diode RoHS Pb GREEN Description The unidirectional AQxx series is designed to replace multilayer varistors (MLVs) in electronic equipment for low speed and DC
More informationSchottky Barrier Rectifier
Schottky Barrier Rectifier TO-0AC ITO-0AC FEATURES Low power loss, high efficiency Low forward voltage drop High forward surge capability High frequency operation MBR0xx MBRF0xx Meets MSL level, per J-STD-00C,
More informationP4SMA-E Series. TVS Diodes Surface Mount 400W > P4SMA-E series Series. Description. Uni-directional
P4SMA-E Series RoHS Pb e3 Description The P4SMA-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationICTE5 thru ICTE18C, 1N6373 thru 1N6386. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor.
TRANSZORB Transient Voltage Suppressors Case Style 1.5KE PRIMARY CHARACTERISTICS V WM 5. V to 18 V V BR (uni-directional) 6. V to 21.2 V V BR (bi-directional) 9.2 V to 21.2 V P PPM 1 W P D 6.5 W I FSM
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS esmp Series Top View SlimSMA (DO-22AC) Cathode DESIGN SUPPORT TOOLS Models Available Bottom View PRIMARY CHARACTERISTICS Anode click logo to get
More information6600W Transient Voltage Suppressor (TVS)
Description SM8S Series TVS diodes can be used in sensitive electronics protection against voltage transients induced by inductive load switching and lighting, especially for automotive load dump protection
More informationMELF Coated Thin Film Precision Resistors (MELFC Series)
Features: Precision TCR of 0, 5, 25 & 50ppm/ C High reliability and stability of ±0. and ±0.5% Excellent pulse load capability Strong mechanical body due to cylindrical shape AEC-Q200 compliant RoHS and
More informationSIDACtor Protection Thyristors Broadband Optimized TM Protection. MC Multiport Series - MS-013. Description
MC Multiport Series - MS-13 RoHS Pb e3 Description The MC Multiport Series MS-13 are low capacitance SIDCtor thyristors designed to protect broadband equipment from damaging overvoltage transients. The
More informationTransient Voltage Suppression Diodes: P6SMB Series SMD Type 600 W
Features 1. For surface mounted applications 2. RoHS compliant and halogen-free 3. Reliable low cost construction utilizing molded plastic technique 4. Glass passivated chip junction 5. Both bi-directional
More informationP6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. FEATURES PRIMARY CHARACTERISTICS
TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional
More informationMTE1 Series Isolated 1W Single Output SM DC/DC Converters
MTE1 Series SELECTION GUIDE FEATURES Single isolated output 1kVDC Isolation Hi Pot Test Typical efficiency 86% Wide temperature performance at full 1 Watt load, 4 C to 85 C UL 69 recognised 3.3V, 5V, 12V,
More informationSurface Mount Trench MOS Barrier Schottky Rectifier
Surface Mount Trench MOS Barrier Schottky Rectifier TMBS SMPA TM Top View Bottom View DO-22BC (SMPA) FEATURES Very low profile - typical height of 0.95 mm Ideal for automated placement Trench MOS Schottky
More informationSM712 Series 600W Asymmetrical TVS Diode Array
SM712 Series 6W Asymmetrical TVS Diode Array RoHS Pb GREEN Description The SM712 TVS Diode Array is designed to protect RS-485 applications with asymmetrical working voltages (-7V to 12V from damage due
More informationSM6T250CAY. Automotive 600 W Transil. Description. Features. Complies with the following standards
Automotive 600 W Transil Datasheet - production data Complies with the following standards IEC 61000-4-2 exceeds level 4: 30 kv (air discharge) 30 kv (contact discharge) ISO 10605, C = 330 pf, R = 330
More informationP6SMB-E Series. TVS Diodes Surface Mount 600W > P6SMB-E series Series. Description. Uni-directional
P6SMB-E Series RoHS Pb e3 Description The P6SMB-E series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.
More informationDATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50
Product specification March 14, 2016 V.0 DATA SHEET THICK FILM CHIP RESISTORS Automotive Precision grade AC series 0.1%, 0.5%, 1%, TC 50 sizes 0402/0603/0805/1206 RoHS compliant & Halogen Free Product
More informationHigh Temperature Stability and High Reliability Conditions FEATURES
Surface Mount PAR Transient Voltage Suppressors High Temperature Stability and High Reliability Conditions DESIGN SUPPORT TOOLS Models Available Top View Cathode esmp Series Bottom View PRIMARY CHARACTERISTICS
More informationDATA SHEET GENERAL PURPOSE CHIP RESISTORS RC0603 5%, 1%, 0.5%, 0.1% Product specification July 01, 2014 V.5 Supersedes Date of Mar.
Product specification July 01, 2014 V.5 Supersedes Date of Mar. 06, 2003 DATA SHEET GENERAL PURPOSE CHIP RESISTORS 0603 5%, 1%, 0.5%, 0.1% RoHS compliant Product specification 2 hahah SCOPE This specification
More informationFODM121 Series, FODM124, FODM2701, FODM Pin Full Pitch Mini-Flat Package Transistor Output Optocouplers
February 22 FODM2 Series, FODM24, FODM27, FODM275 4-in Full itch Mini-Flat ackage Transistor Output Optocouplers Features More than 5mm creepage/clearance Compact 4-pin surface mount package (2.4mm maximum
More informationC 062 C 105 K 1 R 5 T A Rated Voltage (VDC) 5 = 50 1 = = 200
Radial Through Hole Multilayer Ceramic Capacitors Radial, Molded, X7R Dielectric, 50 200 VDC (Commercial Grade) Overview KEMET s epoxy molded radial through-hole ceramic capacitors in X7R dielectric feature
More informationSLD Series. TVS Diodes. Axial Leaded 2200W > SLD series. Description
SLD Series RoHS Pb e3 Description AGENCY Agency Approvals AGENCY FILE NUMBER E2353 Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationSchottky Barrier Rectifier
Schottky Barrier Rectifier TO-0AC ITO-0AC FEATURES Power pack Low power loss, high efficiency Low forward voltage drop High forward surge capability High frequency operation CASE D PA (TO-63AB) MBRF045
More informationKP 376 KP/MMKP 376. AC and pulse metallized polypropylene film capacitors. Fig.1 Simplified outlines.
KP AND KP/MMKP RADIAL POTTED CAPACITORS PITCH 15/22.5/27.5 mm P=15 mm P = 22.5 to 27.5 mm DR931960 Fig.1 Simplified outlines. FEATURES 15.0 to 27.5 mm lead pitch Supplied loose in box and taped on reel.
More informationFeatures. Symbol Parameter Value Unit TO-92 SOT-223. t p TO-92 SOT-223. Peak gate current t p. = 10 μs T J
Sx02xS Series RoHS Description New mp sensitive gate SCR series offers high static dv/dt with low turn off time (tq) through small die planar construction design. ll SCR s junctions are glasspassivated
More informationAC and Pulse Film Foil Capacitors KP Radial Potted Type
KP 1830 AC and Pulse Film Foil Capacitors L max. W max. Marking FEATURES 5 mm lead pitch, supplied loose in box taped in ammopack or reel 0.5 H max. Material categorization: for definitions of compliance
More informationHigh Power Density Surface Mount PAR Transient Voltage Suppressors
High Power Density Surface Mount PAR Transient Voltage Suppressors esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS V BR 6.8 V to 43 V V WM 5.8 V to 36.8 V P PPM (for V BR 6.8 V) 25 W P PPM (for V BR
More information50W TO220 High Power Resistors
50W TO220 High Power Resistors MHP 50 Non-inductive, thin film technology. Thermally enhanced Industry standard TO220 package. RoHS compliant. Low thermal resistance, 2.3 C/W resistor hot spot to metal
More informationEnhanced Power Bridge Rectifiers
New Product BU506 thru BU5 Enhanced Power Bridge Rectifiers TM PowerBridge + ~ ~ - - ~ ~ + Case Style BU + ~ ~ - * Tested to UL standard for safety electrically isolated semiconductor devices. UL 557 4th
More information