Trailing-edge Dimmer ADT400

Size: px

Start display at page:

Download "Trailing-edge Dimmer ADT400"

Elvin Mathews
5 years ago
Views:

1 TRAIIG-EDGE DIMMER. PAGE 1 OF V controlled trailing-edge dimmer housed in a DI-rail enclosure 10W to 400W Contents Technical specification and installation 2 Related product options 3 Wiring diagrams Rotary Push-control Wall Dimmer RPC 3 Rotary Push-switch Wall Dimmer RPS allowing multiple switch positions 4 Rotary Push-control Wall dimmer RPC using global output 4 MoodMaker channel 5 Take Control Unit with multiple position rotary dimming 5 Product order code Multiload 2 Rosemont Road Hampstead ondon W3 6E Telephone +44(0)

2 TRAIIG-EDGE DIMMER. PAGE 2 OF 5 Technical specification and installation Function The is connected to the mains supply and provides regulated power for all dimmable loads dimmable by trailing-edge technology. It is controlled by a standard 0-10V signal, which may come from a simple wall plate rotary control (such as Rotary Pushcontrol Wall Dimmer RPC) or from a lighting control system (such as MoodMaker). includes a relay which switches off and isolates the phase-controlled variable live dimming output when the input signal falls below 1V. If different switching voltage is required, contact Multiload. Technical specification Mains input voltage 230 Volts AC +/-10% 50Hz (Protected by MCB) ote: accepts only a normal full sine wave oad rating Minimum load 10W. Maximum load 400W See Compatibility below Ambient temperature -10 to 40 C SoftStart Turns on lamps smoothly Terminal connections Each terminal accepts cable up to 4mm² Mains supply terminal (live): (neutral) oad output terminals (neutral): V (unswitched variable live), V1 (variable live, switched off below 1V) Signal input (0V), (0-10V signal); Global O, OFF DC output 0V, 15V. 50mA maximum output current Overload protection If an overload occurs on one of the variable live outputs (V, V1) the output automatically turns OFF. Switch off mains supply, remove overload, and switch on mains supply to restore power Safety The product complies with European Safety Regulations (IEC ) when used in lighting circuits containing MCBs. 6A recommended Compatibility The unit is compatible with: Mains dimmable EDs and mains dimmable drivers for constant voltage and constant current EDs We recommend is de-rated to a maximum of 200W for ED loads Mains voltage incandescent lamps ow voltage electronic transformers dimmable by trailing-edge phase control Mains halogen lamps Other sources contact Multiload MADE I UK Installation is a DI-rail mounted product which should be installed in a suitable location. It is not supplied with a DI-rail cabinet (contact Multiolad if you need us to supply the cabinet). It can also be installed as a standalone version, for direct screw mounting in a suitable enclosure, by extending the lugs attached to the base of the enclosure. Installation should be carried out by suitably qualified personnel in accordance with good electrical practice and the appropriate national wiring regulations. The product complies with European Safety Regulations (IEC ) when used in lighting circuits containing MCBs. 6A recommended. Switch off mains electrical supply before commencing installation. Removing low level flicker on some mains dimmable EDs. Due to the characteristics of some mains dimmable ED lamps (or drivers), dimmable by trailing edge technology, the lamps may flicker at low brightness levels. This flicker can be eliminated when using the Multiload Push-Control Dimmer (RPC see Related Product Options) by adjusting the minimum preset to a higher level; or when using a lighting control system, such as Multiload s MoodMaker Scene-setting System (see related product options on page 3) by setting appropriate brightness levels. Physical data V V1 SUPPY 230V AC supply: 230V +/- 10%-50Hz Variable mains load Min 10W - Max 400W Variable mains switching via internal relay Signal: 0-10V or Multiload Rotary Control Temperature range - 10ºC + 40)C IP20 multiload.co.uk +44 (0) Weight: 270g Finish: Plastic Dimensions: W:88mm D:90mm H:58mm OAD OUTPUT GOBA SIGA IPUT 0V O Multiload 2 Rosemont Road Hampstead ondon W3 6E Telephone +44(0)

3 TRAIIG-EDGE DIMMER. PAGE 3 OF 5 related product options PROTECTED MAIS VOTAGE SUPPY 230V COTRO SIGA 0-10V OY OE COTRO SIGA OPTIO TO BE COECTED SEV 15V POWER SUPPY Take Control Unit Trailing-edge Dimmer Up to four Take Control Rotary Wall Dimmers MUTI-OCATIO ROTARY DIMMIG ROTARY DIMMIG MAIS VOTAGE DIMMIG & SWITCHIG SCEE SETTIG Take Control Unit For a single lighting control circuit 0-10V signal sink or source Rotary Push-Control RP Two wire signal 1-10V signal 10W-400W 230V variable MoodMaker Master Set-up Unit MMSU and up to four Scene-select Wallplates MMWP Single channel 0-10V signal wired to Rotary Push-control Wall Dimmer RPC installed with Rotary Push-control Wall Dimmer RP Rotary Push-control Wall Dimmer RP is used when controlling a circuit with more than one SUITABY RATED CIRCUIT PROTECTIO OAD 10W 400W V V1 SUPPY 230V OAD OUTPUT TRAIIG-EDGE DIMMER RP GOBA SIGA IPUT 0V O Rotary Push-control Wall Dimmer RP is used when controlling a circuit with more than one 0-10V SIGA SEV DRAWIG OT TO SCAE WD--RPC. ISS Multiload 2 Rosemont Road Hampstead ondon W3 6E Telephone +44(0)

4 TRAIIG-EDGE DIMMER. PAGE 4 OF 5 wired to Rotary Push-switch Wall Dimmer RPS with multiple switch positions with multiple switch positions installed with Rotary Push-switch Wall Dimmer RPS1 SUITABY RATED CIRCUIT PROTECTIO OAD 10W 400W V V1 SUPPY 230V OAD OUTPUT Two-way switch TRAIIG-EDGE DIMMER Intermediate switch SWITCHES GOBA SIGA IPUT 1 COM 2 0V O RPS1 DIMMER SWITCH Rotary Push-Switch RPS1 Rotary Push-control Wall Dimmer RPS2 is used when controlling a circuit with more than one DRAWIG OT TO SCAE WD--RPS. ISS wired to Rotary Push-control Wall dimmer RPC using global output cabled to Rotary Push-control Wall Dimmer RP using global output If using global output with more two or more loop global signal between units OAD 10W 400W OAD 10W 400W SUITABY RATED CIRCUIT PROTECTIO V V1 V V1 SUPPY 230V OAD OUTPUT SUPPY 230V OAD OUTPUT TRAIIG-EDGE DIMMER ROTARY PUSH-COTRO RP TRAIIG-EDGE DIMMER ROTARY PUSH-COTRO RP RP RP GOBA SIGA IPUT GOBA SIGA IPUT 0V O 0V O MASTER SWITCH A. Switch multilple together ormally open = V1 OFF. Connect all s together on one switch DRAWIG OT TO SCAE WD--RPCG. ISS Multiload 2 Rosemont Road Hampstead ondon W3 6E Telephone +44(0)

5 TRAIIG-EDGE DIMMER. PAGE 5 OF 5 wired to a MoodMaker channel cabled to a channel of the MoodMaker Scene-setting system base board MMSU Use channels C to F for cabling to a channel of MoodMaker OAD 10W 400W V V1 F E D SUPPY 230V OAD OUTPUT 0-10V OUTPUT C F MOODMAKER SET-UP UIT BASE BOARD 0-10V OUTPUT B E D A GOBA IPUT FU 0V OFF TRAIIG-EDGE DIMMER GOBA SIGA IPUT 0V O TO ADDITIOA s EARTH BOCK MAIS IPUT SWITCHED OUTPUTS TOTA MAX 10A 2 1 A B SUITABY RATED CIRCUIT PROTECTIO E DRAWIG OT TO SCAE WD--MMSU. ISS wired to Take Control Unit with multiple position rotary dimming Take Control Unit showing four push-switch rotary Wall Dimmers connected SUITABY RATED CIRCUIT PROTECTIO 10W 400W OUTPUT COTRO VOTAGE 0-10V DC V V1 SUPPY 230V OAD OUTPUT 15V 15V 0V 0V SIG 0V SW1 SW2 0V SIG-H 0V C DC SUPPY IPUT OUTPUT SWITCH HIERARCHY TRAIIG-EDGE DIMMER TAKE COTRO UIT TAKE COTRO ROTARIES COTRO IPUT GOBA 0V O SIGA IPUT D1 C D2 RTC A B C D S S TO ADDITIOA s SUPPY VOTAGE 15V DRAWIG OT TO SCAE WD--. ISS Multiload 2 Rosemont Road Hampstead ondon W3 6E Telephone +44(0)

LED control gear Compact dimming. Uconverter LCBI 10 W 180/350/500 ma phase-cut/1 10 V lp BASIC series

LED control gear Compact dimming. Uconverter LCBI 10 W 180/350/500 ma phase-cut/1 10 V lp BASIC series Uconverter CBI W 1/3/ ma phase-cut/1 V lp BASIC series Product description Dimmable built-in ED Driver Constant current Output current 1, 3 or ma Max. output power W ominal life-time up to, h SEV Dimmable