HomeWorks QS In-Line Load Controls

Size: px

Start display at page:

Download "HomeWorks QS In-Line Load Controls"

Gordon Allen
5 years ago
Views:

HomeWorks QS In-Line Load Controls The HomeWorks QS family of in-line dimmers and switches can lighting and motor loads and provide a system that is convenient and easy to install.

Using a HomeWorks QS hybrid repeater allows devices to be part of a whole house solution that can be led remotely from anywhere in the world.

1 HomeWorks QS In-Line Load Controls The HomeWorks QS family of in-line dimmers and switches can lighting and motor loads and provide a system that is convenient and easy to install. HomeWorks QS in-line load s use Lutron patented Clear Connect technology which provides reliable, wireless communication with other HomeWorks QS devices. Using a HomeWorks QS hybrid repeater allows devices to be part of a whole house solution that can be led remotely from anywhere in the world. Features The dimmer is trailing edge capable of W minimum load and up to 250 W of LED, incandescent, halogen, or ELV loads. The switch is rated for 6 AX of general purpose lighting load and 2 A 0.5 HP of motor load. When used with a HomeWorks QS hybrid repeater*, the load s can be programmed and led via lighting scenes, scheduled daily events, the Lutron Connect app, and other HomeWorks QS system features. Also, the load s can be led from anywhere in the world. Small size allows for simple retrofit installation. Remote device association allows for in-line s to be added to a system without physically accessing product. Control Type Model Number Frequency Country/ Region Dimmer HQRK-R25NE MHz UK, Europe Dimmer HQRM-R25NE Limited China Switch HQRK-R6ANS MHz UK, Europe Switch HQRM-R6ANS Limited China * Requires HomeWorks QS software 3.0 or later.

2 Specifications V~ 50/60 Hz Typical Consumption Regulatory Approvals Environment s ESD Protection Surge Protection Failure Mounting Wiring Device Limits Warranty Dimmer / Switch: <0.5 W conditions: Load and LED are off CE Ambient operating temperature: 0 C to 40 C (32 F to 04 F), 0% to 90% humidity, non-condensing. Indoor use only. HomeWorks QS in-line load s communicate with the system through Radio Frequency (). They must be located within 9 m (30 ft) of a hybrid repeater. System devices operate on 868 MHz or 868 MHz limited frequencies. ed to withstand electrostatic discharge without damage or memory loss, in accordance with IEC ed to withstand surge voltages without damage or loss of operation, in accordance with IEEE C Recommended Practice for Surge Voltages in Low-Voltage AC Circuits. failure memory: should power be interrupted, the will return to its previously set level prior to the interruption when power is restored. Allow adequate space to ensure convective cooling of load. Remove any insulation, heat generating equipment, or obstructions within 20 mm (4.75 in) of the load. For optimal performance, no metal or other electrically conductive material should be present within 20 mm (4.7 in) around the top and sides of the load. The load is not suitable for installation in places where it is fully enclosed in metal (e.g., metal enclosures, electrical cabinets) or within metal ceilings. HomeWorks QS in-line s accept wire gauges between 0.5 mm 2 to 2.5 mm 2 (20 AWG to 4 AWG). Note: All outside wire diameters must be the same and must be between 5.2 mm 8.5 mm (0.2 in 0.3 in). With repeater: Up to 00 devices (e.g., load s, Pico wireless s, Radio Powr Savr sensors, shades, and repeaters) are supported per link. The processor counts as one device and four locations are reserved for hybrid repeaters. Note: Load s have load type and capacity limits. For more information, see Load Type and Capacity. 2

3 Dimensions All dimensions are shown as: mm (in) 32 (.25) 46 (.8) 53 (6.0) Mounting and Installation All dimensions are shown as: mm (in) Insulation 20 mm (4.75 in) 20 mm (4.75 in) Insulation ø 50 mm (2.0 in) 26 mm (.0 in) 05 mm (4.2 in) 3

4 Load Type and Capacity Model Voltage Load Types HQRK-R25NE-240 HQRM-R25NE V~ HQRK-R6ANS /60 Hz HQRM-R6ANS-240 A 250 W Incandescent, halogen, ELV (trailing edge) A 250 W LED* 6 AX Lighting (all types) 2 A 0.5 HP Motor M LV ML LV * LEDs must be Lutron compatible. For more information, see Compatible Boosters and Load Interfaces Some local s can be used to power boosters or load interfaces. Up to three power boosters or load interfaces can be used with one. See table below for a list of s and compatible power boosters and load interfaces. Control ELV interface NGRX-ELVI-CE Booster NGRX-PB-CE 0-0 V interface GRX-TVI HQRK-R25NE-240 P P P HQRM-R25NE-240 P P P HQRK-R6ANS-240 HQRM-R6ANS-240 P P 4

5 HomeWorks QS In-Line Load Controls Wiring Breaker L N = Live = Earth = Neutral = Dimmed Live = Switched Live L N N / Load Strain relief 5

6 P P P P HomeWorks QS In-Line Load Controls Operation Tap to toggle lights on / off Green - Blinks when load is toggled Flashes during association Blue - Advanced programming mode (APM) Red - Blinks when error Range Hybrid Repeater 9 m (30 ft) Radio Powr Savr sensor Radio Powr Savr sensor Radio Powr Savr sensor Hybrid Repeater Pico wireless Pico wireless Pico wireless In-line load 9 m (30 ft) In-line load In-line load 9 m (30 ft) Link 305 m (000 ft) wire length per run 8 m (60 ft) Link 305 m (000 ft) wire length per run All devices must be located within 9 m (30 ft) of a hybrid repeater. The range can be extended with up to four HomeWorks QS hybrid repeaters (HQx-REP) on a single link. 6

7 Model Numbers HQRX-RXXXX-240 Frequency / Channel Code Device Type Frequency / Channel Code K = 868 MHz M = 868 MHz Limited Device Type 6ANS = Switch (Neutral Required) 25NE = Dimmer (Neutral Required) Lutron, Pico, HomeWorks, and Clear Connect are trademarks of Lutron Electronics Co., Inc., registered in the U.S. and other countries. Radio Powr Savr is a trademark of Lutron Electronics Co., Inc. 7

ViveT Maestro Wireless Dimmers and Switches

ViveT Maestro Wireless Dimmers and Switches The Maestro Wireless solution incorporates Maestro Wireless load controls, wireless sensors, and wireless remote controls, which provide a system that delivers