DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "DPS Series 5W, 10W, 18W AC/DC DIN Rail Power Supplies"

Transcription

1 DPS Series 5W, 1W, 18W AC/DC DI Rail Power Supplies AC - DC din rail mountable 5W, 1W and 18W class 2 power supplies E A R G U A R A T E E z U, cu, CE z Universal input 9~265VAC z High efficiency up to 2% z Short circuit protection z Internal input filter z 3 ear warranty Specificaton Model DPS DPS DPS Input Voltage 9~265VAC Output Wattage 5W 1W 18W Output Voltage 24VDC (Other output voltages available on request) Output 21mA 42mA 5mA Efficiency (min/typ) /2% 4/6% 5/% General Specification frequency khz voltage 3VAC resistance 5VDC Ambient temperature -1 to +1 C Derating (from 61 to 1 C) 2.5%/ C 3%/ C 3%/ C Storage temperature -25 to +85 C Relative humidity 2 to 95% RH Cooling Free air convection Dimensions 9 x W22.5 x D mm Weight g 12g 15g Case material Plastic Input Specifications Rated input voltage to 24VAC Input voltage range 9 to 265VAC, 12 to 3VDC ine frequency 4 to 63Hz Inrush current VAC, 23VAC Output Specifications Output voltage accuracy ±1% Minimum load % ine regulation ±1% oad regulation ±2% Transient recovery time 5% load, step changed Temperature coefficient ±.2%/ C Ripple & noise 5mV Hold up time VAC, 23VAC Voltage trim range -1 to +2% DC O indicator threshold at start up 21.6VDC DC OW indicator threshold after start up 18 to 21.6VDC Control and Protection Input fuse T2A / 25VAC internal Rated over load protection 11 to 135% Over voltage protection 125 to 145% Output short circuit Hiccup mode Approvals and Standards CE, U/cU DPS //

2 DPS Series 5W, 1W, 18W AC/DC DI Rail Power Supplies Dimensions (mm) 9 Key Description V+ (1) Positive output terminal 22.5 V- (2) egative output terminal (3) 1 Ground this terminal to minimize high-frequency emissions (4) Input terminals 2 1 (neutral conductor, no polarity at DC input) (5) Input terminals (phase conductor, no polarity at DC input) V - V+ O DC Output Operation indicator ED V - V+ O O DC OW DC Output indicator ED O Trimmer-potentiometer for Vout adjustment O O Construction Installation 9 Easy, safe and secure snap-on, snap-off DI-Rail mounting (TS35/.5 or TS35/15) Ventilation/Cooling ormal convection All sides 25mm free space for cooling recommended Terminal size range 2 Solid:.2-2.mm (AWG24-14) (use copper conductors only) V V+ DC Output O O Derating 5 5 DPS-1-5 DPS-1-1 DPS Connections ine Inrush imiter and Inrush ine imiter and Control Control Output evel DC O (Green ED) Output DC OW evel (Red ED) DC O (Green ED) DC OW (Red ED) DPS //

3 DPS Series 3W, 6W AC/DC DI Rail Power Supplies AC - DC DI rail mountable 3W and 6W class 2 power supplies E A R G U A R A T E E z U, cu, CE z Universal input 85~264VAC z High efficiency z Short circuit protection z Internal input filter z 3 ear warranty Specificaton Model DPS DPS Input Voltage 85~264VAC Output Wattage 3W 6W Output Voltage 24VDC (Other output voltages available on request) Output 125mA 25mA Efficiency (min/typ) 83/86% 86/89% General Specification voltage 3VAC resistance 5VDC Ambient temperature -1 to +1 C Derating (from 61 to 1 C) 2.5%/ C Storage temperature -25 to +85 C Relative humidity 2 to 9% RH Cooling Free air convection Dimensions 9 x W4.5 x D mm Weight 29g 36g Case material Plastic Input Specifications Rated input voltage to 24VAC Input voltage range 85 to 264VAC, 9 to 35VDC ine frequency 4 to 63Hz Inrush current VAC, 23VAC VAC, 23VAC Output Specifications Output voltage accuracy ±1% Minimum load % ine regulation.5% oad regulation.5% Turn on time ms after AC applied to input at full resistive load Voltage fall time 15mS Voltage rise time 15mS at full resistive load Hold up time VAC, 23VAC Temperature coefficient ±.2%/ C Ripple & noise 5mV Voltage trim range 24 to 28VDC DC O indicator threshold at start up 19.2VDC Control and Protection Rated over load protection 11 to 14% 11 to 15% Over voltage protection 3 to 33VDC Output short circuit Fold forward Approvals and Standards CE, U/cU DPS-1-3-6//

4 9 DC O DPS Series 3W, 6W AC/DC DI Rail Power Supplies 6 Dimensions (mm) 8 Pin connections DC O + +Rdy Connections ine V - V+ Inrush DC Output imiter and O 5 O DC O + +Rdy 8 Rdy -Vout Rdy -Vout Output evel Key Description Rdy (1) DC OK output for relay (24V models only) + R (2) >Ω Positive output terminal + (3) Positive output terminal - (4) egative output terminal - (5) egative output terminal (6) Ground terminal to minimize high-frequency emissions () Input terminals (neutral conductor, no polarity at DC input) (8) Input terminals (phase conductor, no polarity at DC input) a) DC Relay O Operation indicator ED Trimmer-potentiometer for Vout adjustment 2.2K.5W Installation Ventilation/Cooling ormal 5.1K convection.3w All sides 25mm free space for cooling recommended b) 5V signal Terminal size range 2 Solid:.2-2.mm (AWG24-14) (use copper conductors only) DC O (Green ED) RD(Open Collector)* Rdy -Vout Rdy -Vout Construction Easy, safe and secure snap-on, snap-off DI-Rail mounting (TS35/.5 or TS35/15) R >Ω a) Relay 2.2K.5W 5.1K.3W b) 5V signal Derating Rdy connections 5 ine Inrush imiter and DPS-1-3-6// Output evel 1 DC O (Green ED) RD(Open Collector)*

5 DPS Series 12W AC/DC DI Rail Power Supplies AC - DC DI rail mountable 12W power supplies E A R G U A R A T E E z Compact design z High efficiency up to 86% z function available z Parallel function available (switch) z Input voltage /23VAC auto select z 3 ear warranty Specificaton Model DPS Input Voltage /23VAC Output Wattage 12W Output Voltage 24VDC (Other output voltages available on request) Output 5A Efficiency (min/typ) 84/86% General Specification voltage 3VAC resistance 5VDC Ambient temperature -25 to +1 C Derating (from 61 to 1 C) 2.5%/ C Storage temperature -25 to +85 C Relative humidity 2 to 95% RH Cooling Free air convection Dimensions x W63.2 x D123.6 mm Weight 92g Case material Metal Input Specifications Rated input voltage Input voltage range Rated input current ine frequency Inrush current Output Specifications Output voltage accuracy /23VAC V: 9 to 132VAC, 23V: 186 to 264VDC 2.8/1.4A 4 to 63Hz VAC, 23VAC to 1% (adjusted pre-shipment) Minimum load % ine regulation ±.5% oad regulation Hold up time Temperature coefficient Ripple & noise Voltage trim range DC O indicator threshold at start up DC O indicator threshold after start up Parallel operation Control and Protection Input fuse ±1% single mode, ±5% parallel mode VAC, 23VAC ±.3%/ C 5mV 22.5 to 28.5VDC 1.6 to 19.4VDC 1.6 to 19.4VDC up to 3 units T3.15A/25VAC internal Rated over load protection 11 to 145% Power Rdy (24V model only) Electrical isolation: 5VDC Threshold volt. contact closed (start up): 1.6 to 19.4VDC Contact 6VDC Over voltage protection 125 to 145% Output short circuit Approvals and Standards limited CE, U/cU DPS-1-12//

6 DPS Series 12W 63.2 AC/DC DI Rail Power 9 Supplies Dimensions (mm) Pin connections S P DC O DC O Rdy 9 Inrush imiter, and Auto /23VAC Smoothing Key Description Rdy(1,2) DC O output for relay (24V models only) + (3) Positive output terminal + (4) Positive output terminal - (5) egative output terminal - (6) egative output terminal () Ground terminal to minimize Single/Parallel high-frequency emissions (8) Reference Input terminals & (phase conductor, no polarity at DC input) (9) Input terminals (neutral conductor, no polarity at DC input) DC O Operation indicator ED DC O DC low voltage indicator ED Trimmer-potentiometer for Vout adjustment DC O (Green ED) S/P Single/Parallel Output select evelswitch DC O (Red ED) RD (Relay Contact)* Installation Construction Derating Ventilation/Cooling ormal convection All sides 25mm free space for cooling recommended Easy, safe and secure snap-on, snap-off DI-Rail mounting (TS35/.5 or TS35/15) Screw Terminal 1-24AWG flexible/solid cable Strip cable ends by 8mm Connections Inrush imiter, and Auto /23VAC Smoothing Single/Parallel Output evel DC O (Green ED) DC O (Red ED) RD (Relay Contact)* DPS-1-12//

7 DPS Series 24W AC/DC DI Rail Power Supplies AC - DC DI rail mountable 24W power supplies E A R G U A R A T E E z Compact design z High efficiency up to 89% z function available z Parallel function available (switch) z Input voltage /23VAC auto select z 3 ear warranty Specificaton Model DPS Input Voltage /23VAC Output Wattage 24W Output Voltage 24VDC Output 1A Efficiency (min/typ) 8/89% General Specification voltage 3VAC resistance 5VDC Ambient temperature -1 to +1 C Derating (from 61 to 1 C) 2.5%/ C Storage temperature -25 to +85 C Relative humidity 2 to 95% RH Cooling Free air convection Dimensions 125 x W83 x D126 mm Weight g Case material Metal Input Specifications Rated input voltage Input voltage range Rated input current ine frequency Inrush current Output Specifications Output voltage accuracy /23VAC V: 93 to 132VAC, 23V: 186 to 264VDC 5.4/2.2A 4 to 63Hz VAC, 23VAC to 1% (adjusted pre-shipment) Minimum load % ine regulation ±.5% oad regulation Hold up time Temperature coefficient Ripple & noise Voltage trim range DC O indicator threshold at start up DC O indicator threshold after start up Parallel operation Control and Protection Input fuse ±1% single mode, ±5% parallel mode VAC, 23VAC ±.2%/ C mv 22.5 to 28.5VDC 1.6 to 19.4VDC 1.6 to 19.4VDC up to 3 units T6.3A/25VAC internal Rated over load protection 12 to 145% Power Rdy Electrical isolation: 5VDC Threshold volt. contact closed (start up): 1.6 to 19.4VDC Contact 6VDC Over voltage protection 12 to 145% Output short circuit Approvals and Standards limited CE, U/cU DPS-1-24//

8 DPS Series 24W 83 AC/DC DI Rail Power Supplies Dimensions (mm) Pin connections S P Inrush Rdy imiter, and Auto /23VAC DC O DC O Smoothing Key Description Rdy(1,2) DC O output for relay (24V models only) + (3) Positive output terminal + (4) Positive output terminal - (5) egative output terminal - (6) egative output terminal () Ground terminal to minimize Single/Parallel high-frequency emissions (8) Reference Input terminals & (phase conductor, no polarity at DC input) (9) Input terminals (neutral conductor, no polarity at DC input) DC O Operation indicator ED DC O DC low voltage indicator ED Trimmer-potentiometer for Vout adjustment DC O (Green ED) S/P Single/Parallel Output select evelswitch DC O (Red ED) RD (Relay Contact)* Installation Construction Derating Ventilation/Cooling ormal convection All sides 25mm free space for cooling recommended Easy, safe and secure snap-on, snap-off DI-Rail mounting (TS35/.5 or TS35/15) Screw Terminal 1-24AWG flexible/solid cable Strip cable ends by 8mm Connections Inrush imiter, and Auto /23VAC Smoothing Single/Parallel Output evel DC O (Green ED) DC O (Red ED) RD (Relay Contact)* DPS-1-24//

9 DPS Series 48W AC/DC DI Rail Power Supplies AC - DC DI rail mountable 48W power supplies E A R G U A R A T E E z Compact design z High efficiency up to 89% z function available z Parallel function available (switch) z Universal input voltage z 3 ear warranty Specificaton Model DPS Input Voltage 9~264VAC Output Wattage 48W Output Voltage 24VDC Output 2A Efficiency (min/typ) 86/89% General Specification voltage 3VAC resistance 5VDC Ambient temperature -25 to +1 C Derating (from 56 to 1 C) 2.5%/ C Storage temperature -25 to +85 C Relative humidity 2 to 95% RH Cooling Free air convection Dimensions 125 x W15 x D123 mm Weight 192g Case material Metal Input Specifications Rated input voltage Input voltage range Rated input current ine frequency Inrush current Output Specifications Output voltage accuracy /23VAC 9 to 264VAC (23VAC typ.), 12 to 3VDC VAC, 23VAC 4 to 63Hz VAC, 23VAC to 1% (adjusted pre-shipment) Minimum load % ine regulation ±.5% oad regulation Hold up time Temperature coefficient Ripple & noise Voltage trim range DC O indicator threshold at start up DC O indicator threshold after start up Parallel operation Control and Protection Input fuse ±.5% single mode, ±5% parallel mode 3mS ±.2%/ C mv 22.5 to 28.5VDC 1.6 to 19.4VDC 1.6 to 19.4VDC up to 3 units 1A/25VAC internal Rated over load protection 12 to 14% Power Rdy Over voltage protection Output short circuit Approvals and Standards Electrical isolation: 5VDC Threshold volt. contact closed (start up): 1.6 to 19.4VDC Contact 6VDC 3 to 33V Continuous current limited CE, U/cU DPS-1-48//

10 1 DC O DC O Rdy P DPS Series 48W S Vout 9 AC/DC DI Rail Power Supplies adj Dimensions (mm) Derating Bridge DC O DC O Rdy P S 1 6 DC O DC O S P Active Rdy Pin connections Key Description Rdy(1,2) DC O output for relay (24V models only) + (3) Positive output terminal + (4) Positive output terminal - (5) egative output terminal - (6) egative Single/Parallel output terminal () Ground terminal to minimize high-frequency emissions (8) Input terminals (neutral conductor, no polarity at DC input) (9) Input terminals (phase conductor, no DC polarity O (Green at DC ED) input) Output evel DC O Operation indicator ED DC O (Red ED) DC O DC low voltage indicator ED RD (Relay Contact)* Trimmer-potentiometer for Vout adjustment S/P Single/Parallel select switch Installation Ventilation/Cooling ormal convection All sides 25mm free space for cooling recommended Screw Terminal 1-24AWG flexible/solid cable Strip cable ends by 8mm Construction Easy, safe and secure snap-on, snap-off DI-Rail mounting (TS35/.5 or TS35/15) Connections Inrush imiter, and Auto /23VAC Smoothing Single/Parallel Output evel DC O (Green ED) DC O (Red ED) RD (Relay Contact)* DPS-1-48//