JQA Management System Registration Mark General Repro Proof
|
|
|
- Adam Rich
- 5 years ago
- Views:
Transcription
1 JQA Management System Registration Mark General Repro Proof Before using the following marks, please confirm the "GUIDANCE ON THE PUBLIC ANNOUNCEMENTS OF REGISTRATION AND CONDITIONS FOR THE USE OF THE REGISTRATION MARKS". When printing by the color, please print at the written specified color. Registration marks can also be printed in monochrome and blue single colour. When printing, please use this repro proof, or please apply for obtaining the electronic data. Electronic data is available on JQA members' site by download. If you need electronic data for Combined registration mark, accreditation symbols, please request us by submitting "Request for Registration Mark Data". Name(1~18) Belt & frame JQA Mark JQA Logo Lower half & outer frame Name(19~21) Belt & frame JQA Mark JQA Logo Outer frame Lower half statement Please never fail to state your certification number beneath the registration mark. 1.ISO 9001 Belt & frame Lower half & outer frame 2.ISO Belt & frame Lower half & outer frame 3.OHSAS DIC138 (Process color/ C98%) 4.HACCP DIC82 (Process color/ M57%+Y95%) 1 / 6
2 5.ISO/IEC DIC360 (Process color/ C30%+M3%+Y92%) 6.ISO/IEC DIC2557 (Process color/ C75%+Y95%) 7.JIS Q 9100 DIC426 (Process color/ C88%+M70%+Y50%) 8.TL 9000 DIC157 (Process color/ M100%+Y95%) 9.IATF DIC133 (Process color/ C86%+Y 60%) DIC2615 (Process color/ C40%+M98%+Y40%) 10.ISO DIC133 (Process color/ C86%+Y 60%) DIC75 (Process color/ M67%+Y7%) 2 / 6
3 11.ISO DIC160 (Process color/ M77%+Y100%) 12.FSSC DIC118 (Process color/ M90%+Y93%) 13.ISO DIC387 (Process color/ C89%+M54%+Y90%) 14.JIS Q DIC620 (Process color/ C43%+M53%+Y88%) Re:Three kinds of mark are available. Please select your preferable one. 15.Management of Chemical Substances in Products DIC620 (Process color/ C43%+M53%+Y88%) 3 / 6
4 16.ISO DIC2563 (Process color/ C94%+M27%+Y74%) 17.ISO DIC621(Process color/ C54%+M44%+Y45% ) 18.JIP-ISMS517(ISO/IEC 27017) DIC178 (Process color/ C96%+Y22%) 19.ISO 9001 ISO Lower half Outer frame statement 20.ISO 9001 ISO ISO/IEC Lower half Outer frame statement 21.ISO 9001 ISO ISO/IEC ISO Lower half Outer frame statement Remarks:For information on marks other than combined registration marks represented in 19 to 21, please 4 / 6
5 22.JAB Accreditation Symbol Registered organizations whose JQA-registration certificate shows a JAB accreditation symbol have the optional right to use this symbol. If you are to use this JAB symbol, please use it together with JQA registration mark. DIC579(Process color/ C100%+M58%) or apporoximate color (Ex. DIC N-891) Lower half 23.JIPDEC Accreditation Symbol (ISO/IEC 27001) 24.JIPDEC Accreditation Symbol (ISO/IEC 20000) 25.JIPDEC Accreditation Symbol (IS ) 26.JIPDEC Accreditation Symbol (CSMS) 27.JIPDEC Accreditation Symbol (JIP-ISMS517(ISO/IEC 27017)) 5 / 6
6 28.UKAS Accreditation Symbol (ISO 9001,ISO 14001,ISO/IEC 27001) Registered organizations whose JQA-registration certificate shows an UKAS use this UKAS symbol, please use it together with JQA registration mark. (Either black and white) Note: The standard height must be at minimum 20mm. Depending on the situation of use, it may be used in a reduced size, provided it is legible. GOLD:PANTONE872 (Process color/ Y80%+C20%+M20%) or apporoximate color PANTONE117 BLUE:ReflexBlue (Process color/ C100%+M70%) RED:WarmRed (Process color/ Y100%+M100%) GREEN:PANTONE347 (Process color/ Y90%+C100%) BLACK Crown line artwork WHITE All Pearls 29.FSSC logo Green PANTONE 348U (Process color/ C82%+M25%+Y76%+K7%) Grey 60% black (Process color/ K60%) 30.JFSM マーク Black TOYO COLOR FINDER CF97C BLACK(Process color/ ) Red TOYO COLOR FINDER CF10101 (Process color/ M100%+Y100%) Blue TOYO COLOR FINDER CF10390(Process color/ C70%+M10%) TOYO COLOR FINDER CF97C BLACK(Process color/ K50%) TOYO COLOR FINDER CF97C BLACK(Process color/ ) TOYO COLOR FINDER CF97C BLACK(Process color/ K65%) 31.IQNet Mark (ISO 9001, ISO 14001) Organizations registered with ISO 9001and/or ISO 14001have the optional right to use this mark(different from the mark displayed on the certificate). If you are to use this mark, please use it together with JQA registration mark. DIC N-891 (Process color/ C90%+M60%) DIC 156 (Process color/ M100%+Y94%) Assessment Center, Management Systems Sector, Japan Quality Assurance Organization Phone: Facsimile: JQA Website: / 6
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in Arcoaire brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements Crest
Tender Notice No.14/17(1)/2015-SSS/31 January 14, 2016
Government of India Department of Atomic Energy Anushakti Bhavan, C.S.M. Marg, Mumbai 400 001. Tender Notice No.14/17(1)/2015-SSS/31 January 14, 2016 Sealed tenders are invited on behalf of the President
Terms. Color Hue. Spot color Flood Value Density RGB. Pantone Duotone Hexachrome CMYK Gamut. Toyo/Trumatch
COLOR! Management A system of: hardware, software & procedures that are calibrated to best insure color accuracy and repeatability throughout the production process Terms Sensation caused by light as it
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in Comfortmaker brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements
L O G O G U I D E L I N E S
LOGO GUIDELINES To ensure consistency in KeepRite brand communications, the Elite Dealer crest can only be used in accordance with the specifications listed in the following pages. 1 Logo Elements Crest
PixaGraphic. PixaGraphic. transforms glass into a creative medium without limitation. Colour matching. Overview
DESIGN GUIDELINES PixaGraphic Overview Viridian PixaGraphic is a state of the art decorative glass product, manufactured using ceramic coated ink which is printed directly onto the glass. The PixaGraphic
BUREAU VERITAS seafood services : Responsible sourcing recognition. Laurent Galloux Global Seafood manager
BUREAU VERITAS seafood services : Responsible sourcing recognition Laurent Galloux Global Seafood manager services in fishing and seafood farming sector Our clients aims? Secure or improve quality, food
TPS 49 EDITION 2 JUNE 2009
TPS 49 EDITION 2 JUNE 2009 Interim arrangements & guidance on the interpretation of IEC 61672 Sound Level Meters - Periodic Tests CONTENTS SECTION PAGE 1 Purpose and duration 2 2 Statement 2 3 Specific
Issue one May Scottish Parliament Corporate Identity Quick Guide
Issue one May 2017 Scottish Parliament Corporate Identity Quick Guide 1 Contents Introduction 3 Corporate Identity: 4 Overview 5 Versions Minimum size 7 8 Exclusion zone 9 Background 10 Colour: primary
Frequently Asked Questions (FAQs) Pertaining to G7,GRACoL and ISO
Frequently Asked Questions (FAQs) Pertaining to G7,GRACoL and ISO 12647-2 What is G7? Developed by IDEAlliance, and the GRACoL committee, G7 is a calibration and process control methodology used to align
Unit Title: Undertake Colour Management Procedures
Unit Credit Value: 6 Unit Level: Three Unit Guided Learning Hours: 50 Ofqual Unit Reference Number: M/600/9001 Unit Review Date: 31/12/2016 Unit Sector: 9.3 Media and Communication Unit Summary In this
PUBLIC TRAINING PROGRAM July - December 2018 VENUE: Petaling Jaya, Shah Alam, Kuala Lumpur, Penang, Johore, Kuching.
FOUR TRAINING PROVIDER ISO 9001 Quality Management System. Understanding & Implementing ISO 9001:2015. (CIDB-CCD)(SBL-Khas) 2 16-17 19-20 13-14 Effective Control of Project Documentation. NEW (CIDB-CCD)
TPS 66. Edition 2 March TPS 66 / Edition: 2 Page 1 of 10
TPS 66 Edition 2 March 2018 UKAS Technical Policy Statement for the Implementation of IAF MD 17 Witnessing Activities for the Accreditation of Management Systems Certification Bodies TPS 66 / Edition:
Color Models: RGB vs CMYK
Color Models: RGB vs CMYK RGB Color Model - Emitted Light 1. The RGB color space is used for screens and monitors Web, smart phone, tablets, video 2. RGB files have three color channels Red, Green, Blue
Artwork Preparation Guide
Artwork Preparation Guide General notes Artwork Preparation Guide Size, Position and Order When displaying a series of card symbols together, the following rules apply: No logo should occupy a prominent
Branding Guidelines York Branding Guide September 2011
Branding Guidelines COLOR 1-Color Printing: The logo prints in all black ink. 100% Black 2-Color Printing: The logo prints either in all black, or in 2 colors: Pantone 032 and black. On a black or dark
Predicting the unpredictable in a Pantone world. Garett Long Commercial Technologist Southern Graphic Systems
Predicting the unpredictable in a Pantone world Garett Long Commercial Technologist Southern Graphic Systems Garett Long, Commercial Technologist Company-wide Color Management Resource Profiling Troubleshooting
Idealliance ISO/PAS Certification Program Program Description v5 1. Introduction
Idealliance ISO/PAS 15339 Certification Program Program Description v5 1. Introduction 1.1 Background Idealliance ISO/PAS 15339 Certification is an expanded compliance program to the Digital Press Certification
ISO INTERNATIONAL STANDARD. Gel ink ball pens and refills Part 2: Documentary use (DOC)
INTERNATIONAL STANDARD ISO 27668-2 First edition 2009-02-01 Gel ink ball pens and refills Part 2: Documentary use (DOC) Stylos à bille à encre gel et recharges Partie 2: Utilisation documentaire (DOC)
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JAPAN QUALITY ASSURANCE ORGANIZATION Kyushu testing office 2-33, Miyanojin 3-Chome, Kurume-shi, Fukuoka, 839-0801 Japan Masaya Ishimaru Phone: 81 942 48 7763
Voluntary Carbon Standard
Voluntary Carbon Standard Voluntary Carbon Standard Program Guidelines 19 November 2007 VCS Secretariat 24 rue Merle-d Aubigné, 1207 Geneva, Switzerland secretariat@v-c-s.org 1 Voluntary Carbon Standard
INTERNATIONAL PRINTING STANDARDS, A VALUE-ADDED PROPOSITION*
INTERNATIONAL PRINTING STANDARDS, A VALUE-ADDED PROPOSITION* Robert Chung rycppr@rit.edu KEYWORDS printing, publishing, standards, control, certification ABSTRACT The twin issues of quality and productivity
ISO Prin.ng from digital data across mul.ple technologies. " Mr. David McDowell
ISO 15339 Prin.ng from digital data across mul.ple technologies " Mr. David McDowell March 15, 2012 The real title" An introduction to ISO 15339; " The history and genesis of ISO 15339; " why the printing
THE KENYA POWER AND LIGHTING CO. LTD. SPECIFICATIONS for IMPULSE VOLTAGE TEST EQUIPMENT
THE KENYA POWER AND LIGHTING CO. LTD SPECIFICATIONS for IMPULSE VOLTAGE TEST EQUIPMENT NAME DESIGNATION SIGNATURE DATE Compiled by Ephantus Nyagah Ag. Senior Engineer Checked by Eng. Thagichu Kiiru Deputy
UBC Logos: Quick Guide
primary logo UBC Full Signature The UBC Full Signature is the primary logo to be used on all applications. Please ensure that the signature is reproduced at a legible size. In instances where the space
Print Production From Design to Print for Packaging
#COLOR19 Print Production From Design to Print for Packaging Birgit Plautz Eric Dalton GMG Americas About the Presenters Birgit Plautz Manager of Technical Services GMG Americas 20 years experience in
Ultrium Compliance Marks Style Guide
Ultrium Compliance Marks Style Guide Generation 7 Trademark Style Guide Document #U-S51 Revision 2 July 2015 1.0 Basic Identity Standards The LTO Program trademarks are important assets of the LTO Program.
Corporate Brand Guidelines....your local connection
Corporate Brand Guidelines Content Description of the whl.travel Logo 2 Explanation of the whl.travel Logo 3 Isolation Area 4 Typography 5 Minimum Size 6 Colour 7 Colour Reproduction 8 Incorrect Uses of
Given that the yield of precious metals
Tanaka Showcases Globally Recognized Metal Analysis Techniques Given that the yield of precious metals with excellent characteristics is small, precious metals are extremely precious resource. Tanaka Kikinzoku
Special Olympics Delaware Logo Guidelines
Special Olympics Logo Guidelines Introduction - Special Olympics Brand Identity Guidelines Our brand is our reputation, a reputation shared by all of the programs within Special Olympics. This reputation
Adaptive color artwork
Adaptive color artwork Giordano Beretta Digital Printing and Imaging Laboratory HP Laboratories Palo Alto HPL-2006-186 December 15, 2006* variable data printing, custom publishing, color printing, visual
SPECIFICATION FOR RUBBER INSULATING GLOVES FOR LOW VOLTAGE 500V
Page no.: 1 SPECIFICATION FOR RUBBER INSULATING GLOVES FOR LOW VOLTAGE 500V ( חתום Bar-David( Prepared by: I. Checked by: (חתום) Brodetsky.A ( חתום ( Liberman Approved by: N. Page no.: 2 Contents: 1. General
Designated Institutes participating in the CIPM MRA
Designated Institutes participating in the CIPM MRA Expectations and nomination form Version 1.2 Contents 1. Introduction... 1 2. Designated Institute in Appendix A of the KCDB... 2 2.1. Designation of
Graphic Standards. for Logo Use. All electronic logo files can be downloaded at: North Coast Medical, Inc.
Graphic Standards for Logo Use All electronic logo files can be downloaded at: www.ncmedical.com/logos 07/2015 Graphic Standards: Logo Overview General Logo The North Coast Medical logo should be reproduced
BU3 Beijing 2008/Johnson & Johnson (English & Chinese)
BU3 Worldwide Partner & Worldwide Olympic Partner Identity Guidelines 06/07/06 i. Overview Worldwide Partner & Worldwide Olympic Partner Table of contents Overview i. Table of contents ii. Using these
DNVGL-CP-0293 Edition July 2018
CLASS PROGRAMME Type approval DNVGL-CP-0293 Edition July 2018 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that it is prohibited
AMD Ryzen VR Ready Premium and AMD VR Ready Processor Badge Guidelines for Marketing Materials. September 2017 PID# A
AMD Ryzen VR Ready Premium and AMD VR Ready Processor Badge Guidelines for Marketing Materials September 2017 PID# 1748295-A The Purpose of this Document These guidelines will help streamline the development
INSTRUCTIONS FOR CORRECT PREPARATION OF DIGITAL MATERIALS
Digital materials should be delivered by means of: - the FTP protocol to the designated server: ftp.drukarniaperfekt.pl or ftp2.drukarniaperfekt.pl. If the materials must be kept separate, the server access
Information on the Industrial Exhibition and Advertising at the 17 th AMK
Information on the Industrial Exhibition and Advertising at the 17 th AMK Model and outline of the exhibition booth at Aachener Membran Kolloquium Booth construction: Wall construction: Inner wall size:
APPROX SIZE_33.125"( mm)(W) x "( mm) (H) x 4"(101.6mm) (D) NOTE: THE DIGITAL FILE S ARTWORK IS 100% ACTUAL SIZE
2010 Geoffrey, LLC Client: Toys R Us File Name: FAO_BigPiano_Corrugate_V1.ai Application: Adobe Illustrator CS3 One Geoffrey Way, Wayne, NJ 07480 tel. 973-617-3500 toysrus.com Date: 09/24/10 COLORS: Description:
Australian Dragon Boat Federation Corporate Style Guide. Australian Dragon Boat Federation Style Guide
Australian Dragon Boat Federation Corporate Style Guide Australian Dragon Boat Federation Style Guide 1 Contents Introduction 3 Objective 4 NATIONAL LOGO 5 Australian Dragon Boat Federation Logo 6 Australian
If you wish to book an exhibition booth, please complete the agreement form under sponsorship & exhibition opportunities. Deadline 4 th October 2010.
Exhibition options: - Exhibition booth - Package: General Sponsorship + Exhibition booth - Lunch Sponsorship incl. Exhibition booth - Wine Tasting Sponsorship incl. Exhibition booth Please refer to respective
How to check Print Standards
How to check Print Standards Launch the checking process 1 Simulate the verification 5 Procedure 5 Results interpretation 7 Standard constraints 8 Color code 8 Available actions 8 Swatches 10 Failed test:
SPECIFICATION FOR SAFETY POLE SIGNS & ACCESSORIES
KP/3CB/TSP/0/00 04-09-9 Page of 9 TABLE OF CONTENTS 0. Circulation List 0. Amendment Record FOREWORD. SCOPE. REFERENCES 3. TERMS AND DEFINITIONS 4. REQUIREMENTS 5. TESTS AND INSPECTION 6. MARKING, LABELLING
CERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Coherent LSM 27650 SW 95 th Avenue Wilsonville
A Guide to the Mutual Recognition Agreement between the European Community and Japan
Presented to EUROPEAN COMMISSION Directorate-General for Trade A Guide to the Mutual Recognition Agreement between the European Community and Japan September 2003 Submitted by MTA Japan Co., Ltd. & Mitsubishi
SNAP Certification. 1/013/14 Version 1
SNAP Certification The purpose of this press test is to determine if the printing process is compliant with SNAP specifications. The way of measurement is not the typical pretty picture contest. The SNAP
EPEAT CONFORMITY ASSESSMENT PROTOCOLS 4.7 Corporate Performance
EPEAT CONFORMITY ASSESSMENT PROTOCOLS 4.7 Corporate Performance 4.7.1 Environmental Management System 4.7.1.1 Required Self-declared environmental management system for design and manufacturing organizations
Identity Guidelines 02 Signature. 03 Clear Zone and Sizing 04 Trademark 05 Configurations 06 Restrictions 07 Color Palette 08 Acceptable Usage
Identity Guidelines 02 Signature 03 Clear Zone and Sizing 04 Trademark 05 Configurations 06 Restrictions 07 Color Palette 08 Acceptable Usage Signature The term signature commonly refers to a basic configuration
STANDARD ST.67 MAY 2012 CHANGES
Ref.: Standards - ST.67 Changes STANDARD ST.67 MAY 2012 CHANGES Pages DEFINITIONS... 1 Paragraph 2(d) deleted May 2012 CWS/2... 1 Paragraph 2(q) added May 2012 CWS/2... 2 RECOMMENDATIONS FOR ELECTRONIC
Colours and Control for Designers. This article is supported by...
Wild Format Technology Guides Series 3 The Wild Format guides are intended to expand awareness and understanding of the craziness that can be created on wide format digital printing devices, from floors
How To Supply Your Artwork In a Print Ready Format
design l photography l print How To Supply Your Artwork In a Print Ready Format Please ensure artwork is supplied in accordance with this guide. Any artwork that is not in accordance with the following
ASSOCIATION SIGNATURE GUIDELINES May 2014 Based on version 2.1 of Branding Guidelines
ASSOCIATION SIGNATURE GUIDELINES May 2014 Based on version 2.1 of Branding Guidelines ASSOCIATION OF AMI SIGNATURE 4.5 0.5 0.5 0.5 ASSOCIATION COLOR PALETTE MATCH COLOR REPRODUCTION INK SUBSTITUTION 2
ArtPrize Trademarks Introduction
Introduction ArtPrize is a one of a kind event. Our trademarks are one of a kind too. They symbolize the distinctiveness of this international art competition and help us present a consistent face to the
PUBLIC TRAINING PROGRAM January - June 2019 VENUE: Petaling Jaya, Shah Alam, Kuala Lumpur, Penang, Kuantan, Johore, Kuching, Labuan.
ISO 9001 Quality Management System. Understanding & Implementing ISO 9001:2015. (CIDB-CCD)(SBL-Khas) 2 14-15 11-12 27-28 Effective Control of Project Documentation. (CIDB-CCD) 2 25-26 13-14 The Hidden
UCCS Apparel. UCCS Brand Identity Standards Appendix IV: Apparel
UCCS Apparel UCCS Brand Identity Standards Appendix IV: Apparel UCCS apparel is divided into two categories: official apparel and promotional apparel. Official Apparel Official apparel is apparel that
WP197 Capacity Market Metering Test
WP197 Capacity Market Metering Test EMRS Working Practice Public Version: 4.0 Date: 20 July 2018 Table of Contents Change Amendment Record 4 1. Introduction 5 1.1 Scope and Purpose 5 1.2 Main Users and
1 st CSCP National Photography Salon
1 st CSCP National Photography Salon FIP Patronage no. : FIP 2018/FIP/14/2018 ORGANIZER Calcutta School of Contemporary Photography Corporate Member of FIP: CM 911 Address: Store# C-306, City Centre 1,
Radio Equipment Approval in Japan. November 17, 2017 ANF Seminar
Radio Equipment Approval in Japan November 17, 2017 ANF Seminar Contents Part 1: General Overview 1.1 Regulatory Authority 1.2 Relevant Legislation 1.3 Approval Schemes 1.4 Product Scope 1.5 Test Standards
N-Mark Trademark Usage Guidelines for Devices. November 2010
N-Mark Trademark Usage Guidelines for Devices November 2010 RESTRICTIONS ON USE This Trademark Usage Guidelines document is Copyright 2005-2010 by NFC Forum, Inc. All rights are reserved. This document
INTRO OWNED & LICENCED BRANDS HEALTH CARE PRIVATE LABEL
2 3 INTRO The Group s commercial structure is divided into 3 business areas: PRIVATE LABEL OWNED & LICENCED BRANDS HEALTH CARE Being the strongest business area, the PRIVATE LABEL structure ensures the
RFQ568 AW th June Uniform Waterpark
RFQ568 AW 11062018 11 th June 2018 Uniform Waterpark UShaka Marine World invites eligible and accredited service providers to submit a written quotation on their official letter head for the above services.
ASME Geometric Dimensioning and Tolerancing Professional Certification Applicant Information Handbook
GO.ASME.ORG/GDTP ASME Geometric Dimensioning and Tolerancing Professional Certification Applicant Information Handbook The American Society of Mechanical Engineers ASME STATEMENT OF POLICY ON THE USE OF
Quo Vadis ISO ? The Workshop
5 th International Prinect User Days, October 8 th and 9 th, 2014 Quo Vadis ISO 12647-2? The Workshop Bernd Utter, HDM AG; Karl Michael Meinecke, bvdm 8th and 9th October 2014 What s new? 1. ISO 3664:2009
Style guide. November 2015 v1.0; CC BY 4.0.
Style guide November 2015 v1.0; CC BY 4.0 http://creativecommons.org/licenses/by/4.0/ Introduction Our visual identity is a core part of our user experience, so it s important to us that it be used correctly.
Quality Systems, Accreditation and the Food Sector
Presentation Outline Quality Systems, Accreditation and the Food Sector David Galsworthy Head of Quality Systems Team Central Science Laboratory York, UK My background The Quality Standards Accreditation
Spectral data communication from prepress to press
Spectral data communication from prepress to press Veronika Lovell 29 June 2017 What s printing Process color CMYK Extended Color Gamut ECG Spot Colors, Pantone or Brand Colors 2 Color in Process Ink Sets
National Certificate in Furniture (Manufacturing Upholstery) (Level 2)
NQF Ref 0621 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery) (Level 2) Level 2 Credits 63 This qualification is expiring. The last date to meet the requirements is 31
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
Specialist Services Section
Specialist Services Section An overview Ian Yexley Chairman Specialist Services Section Chief Executive Officer UniTrust Protection Services (UK) ltd 1 Specialist Services Section Why choose a BSIA Specialist
National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3)
NQF Ref 0619 Version 3 Page 1 of 5 National Certificate in Furniture (Manufacturing Upholstery Cutting) (Level 3) Level 3 Credits 59 This qualification is expiring. The last date to meet the requirements
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL.
UNLIMITED VARIETY OF CREATIVE SHEET MATERIAL. MADE IN SWITZERLAND Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical
Quantitative Analysis of Tone Value Reproduction Limits
Robert Chung* and Ping-hsu Chen* Keywords: Standard, Tonality, Highlight, Shadow, E* ab Abstract ISO 12647-2 (2004) defines tone value reproduction limits requirement as, half-tone dot patterns within
BRAND STYLE GUIDE External 07/ 2011
BRAND STYLE GUIDE External 07/ 2011 TABLE OF CONTENTS understanding the brand 01 What is a brand? 01 Why are guidelines needed? 01 Who should use these guidelines? 01 How should they be used? 01 Brand
Color Management, Profiles, and Spot Colors. Not Everything There is to Know, but Enough to Get You Started
Color Management, Profiles, and Spot Colors Not Everything There is to Know, but Enough to Get You Started John Hendron johnhendron.net April, 2005 Color, Photoshop, and the Mac, 2 Introduction Color on
printing A guide to newsprint printing
A guide to newsprint A guide to newsprint Introduction Our aim in producing this guide is to help you modify your files to meet our paper and requirements, so you can receive the best print result possible.
Logo guidelines National Physician Suicide Awareness Day
Logo guidelines National Physician Suicide Awareness Day Prepared by Jeff Ondeyka on 4/30/18 Logos Full color Grayscale Color options: Full Color is preferred and should be used whenever possible. Grayscale
BRAND IDENTITY GUIDELINES NOVEMBER 2017
03 BRAND IDENTITY GUIDELINES NOVEMBER 2017 CONTENTS Page 03 Colors What CMYK, RGB & Hex color values are mandatory or to be achieved when printing? Page 04 Color Variants When should which color variant
Visual Standards and Brand Guidelines V 1.3
Visual Standards and Brand Guidelines V 1.3 Introduction To maintain Fidesmo s identity and integrity, the Brand must be used according to certain specifications. The policy guidelines with regard to the
Pharma Clean Assurance Programme.
Pharma Clean Assurance Programme www.lcpackaging.com Cleaner, safer and sustainable 02 Innovative FIBC programme for premium pharma clean packaging The biggest challenge for the pharmaceutical industry
DESIGN GUIDE CUSTOM BOTTLES
DESIGN GUIDE CUSTOM BOTTLES Artwork File Formats Artwork for custom bottle printing may be received in both vector or raster file formats depending on the type of artwork. Artwork will be determined by
VIBRATION ANALYZER. Vibration Analyzer VA-12
VIBRATION ANALYZER Vibration Analyzer VA-12 Portable vibration analyzer for Equipment Diagnosis and On-site Measurements Vibration Meter VA-12 With FFT analysis function Piezoelectric Accelerometer PV-57with
Chapter I - Federal Communications Commission Subchapter A - General Part 15 - Radio Frequency Devices Subpart C - Intentional Radiators
www.nemko.com Report Reference ID 167484-1TRFWL Test specification Title 47 - Telecommunication Chapter I - Federal Communications Commission Subchapter A - General Part 15 - Radio Frequency Devices Subpart
Chrysler EMC/Electrical Laboratory DC-11224/5 & DC Self-Assessment
CHRSLER CORPORATION Laboratory Testing Capability Self-Assessment Form: Revision 2.0 Lab Approval Category Code: J-1 Change: August 1, 2007 1.0 GENERAL Chrysler EMC/Electrical Laboratory DC-11224/5 & DC-10615
MITCHELL COLLEGE MITCHELL COLLEGE VISUAL STANDARDS. Visual Identity Standards
1 MITCHELL COLLEGE Visual Identity Standards 2 TABLE OF CONTENTS PURPOSE, BACKGROUND, ELEMENTS...4 3 HOW TO USE THE MITCHELL COLLEGE LOGO...5 SIZE and SPACING...6 MITCHELL COLLEGE COLOR USAGE...7 OFFICIAL
Corporate Identity Manual
Corporate Identity Manual Index 1. The Logo 2. Corporate colors 3. Typographies 4. Logo versions 5. Banned uses 6. Readability and Protection 1. The Logo PANACEA Network looks for the promotion of Non
Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17021-1:2015 to provide quality The Base Dartford Business Park Victoria Road Kent DA1 5FS Contact: Krystyna Stephens
Demonstrate industry knowledge for reel-fed printing
Page 1 of 6 Demonstrate industry knowledge for reel-fed printing Level 3 Credits 15 Purpose People credited with this unit standard are able to, for reel-fed printing, demonstrate knowledge of: halftones;
Printed Ribbon Information Sheets. Everything you need to know about personalised ribbon printing
Information Sheets Everything you need to know about personalised ribbon printing Printed Acetate Satin Ribbon We can print a single or two colour print on to our Acetate Satin ribbon and a single colour
Using the logo. About the logo. Elements. The seal. The logotype. Third party logo use
Style guide 218 Using the logo About the logo Jimmy is at the heart of everything we do as a charity and this is reflected by his name being at the foundation of our actions. The various elements of the
Working with leading distributors, the availability of FOREX products is guaranteed throughout Europe.
MADE IN Switzerland. Airex AG was founded in 1956 and pioneers with its innovations in the field of foamed plastic materials. Apart from manufacturing technical solutions for industrial applications, in
WelcomeBC Graphic Standards Guide
WelcomeBC Graphic Standards Guide The WelcomeBC Mark The WelcomeBC Mark is created by combining the BC ID with the WelcomeBC wordmark. The Mark uses the colours and typeface from the BC ID Mark to maintain
IDENTITY GUIDELINES AND GRAPHIC STANDARDS MANUAL SPRING 2017
IDENTITY GUIDELINES AND GRAPHIC STANDARDS MANUAL SPRING 2017 THE IMPORTANCE OF GRAPHIC STANDARDS The United Mail logo is our unique graphic signature. It is one of the most visible aspects of the company
SAQA. How to Submit an Online Entry. Art by Mary Kay Fosnacht
SAQA KS MO OK How to Submit an Online Entry Art by Mary Kay Fosnacht Registration Process Locate and read the Prospectus Open the Registration Form Preview 1. About the Artist 2. About the Art 3. Upload
APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010
APMP GUIDELINES FOR ACCEPTING A QUALITY SYSTEM(V.2.0 WD2) approved on July 2010 The CIPM global mutual recognition arrangement (global MRA) requires national metrology institutes (NMIs) to have in place
HEIDE EDUCATION RESOURCE
Workshops on the run Abstracting the environment This education resource has been produced by Heide Museum of Modern Art to provide information to support education institution visits to the museum. Reproduction
Printing Guideline for the Design of Laminate Tubes
Page 1 von 11 Printing Guideline for the Design of Laminate Tubes 1. Definition of printed areas and blank spaces AVAA 8.0 Page 2 von 11 Page 3 von 11 2. Minimum spacing 2.1 Print spacing Label Blank area
Vision and Mission Statements
Branding Guide Vision and Mission Statements Better evidence for a better world -Campbell Collaboration vision statement The Campbell Collaboration promotes positive social and economic change through
Connecting the Dots. deas inprocesscontrol. From print buyers, printed color and printing standards to conformity assessment.
Connecting the Dots From print buyers, printed color and printing standards to conformity assessment. By Robert Chung introduction Connecting the Dots was a classroom exercise I used when I taught at the
Graphic Standards Guide
Graphic Standards Guide Purpose of this document This graphic standards guide is designed to assist CACCN members, staff and contracted suppliers in maintaining a consistent usage of the elements of the