3M Highland Terminals
|
|
- Dorcas Cain
- 5 years ago
- Views:
Transcription
1 3M Highland Terminals 3M Highland terminals, disconnects, and connectors are for use in the assembly and maintenance of elcetrical systems. 3M Highland terminals offer effective and reliable performance in a variety of types of general applications. Available in low quantity, reclosable bags, 3M Highland terminals are the optimal choice for smaller jobs. Section Page 3M Highland Terminals M Highland Ring Tongues...72 Insulated Seam Ring Tongues M Highland Standard Forks...73 Insulated Seam Standard Forks M Highland Block Forks...74 Insulated Seam Block Forks M Highland Locking Forks...75 Insulated Seam Locking Forks M Highland Butt Splices...75 Insulated Seam Butt Splices M Highland Female Disconnects...76 Nylon Fully Insulated Seam Female Disconnects...76 Insulated Seam Female Disconnects M Highland Male Disconnects...77 Nylon Fully Insulated Seam Male Disconnects...77 Insulated Seam Male Disconnects...77 PHONE:
2 3M Highland Terminals: 3M Highland Ring Tongues Insulated Seam Ring Tongues Ring Standard RV18-6Q AWG 6 25 RV18-10Q AWG RV18-8Q AWG 8 25 RV18-14Q AWG 1/4" 25 RV14-6Q AWG 6 25 RV14-10Q AWG RV14-8Q AWG 8 25 RV14-14Q AWG 1/4" 25 RV14-516Q AWG 5/16" 25 RV10-10Q AWG RV10-6Q AWG 6 25 RV10-8Q AWG 8 25 RV10-14Q AWG 1/4" 25 RV10-516Q AWG 5/16" 25 RV10-38Q AWG 3/8" FAX:
3 3M Highland Terminals: 3M Highland Standard Forks Insulated Seam Standard Forks Fork Standard FV14-6Q AWG 6 25 FV14-8Q AWG 8 25 FV14-10Q AWG FV10-8Q AWG 8 25 FV10-10Q AWG PHONE:
4 3M Highland Terminals: 3M Highland Block Forks Insulated Seam Block Forks Fork Block BFV18-6Q AWG 6 25 BFV18-8Q AWG 8 25 BFV18-10Q AWG BFV14-6Q AWG 6 25 BFV14-8Q AWG 8 25 BFV14-10Q AWG BFV10-6Q AWG 6 25 BFV10-8Q AWG 8 25 BFV10-10Q AWG FAX:
5 3M Highland Terminals: 3M Highland Locking Forks Insulated Seam Locking Forks Fork Locking LFV18-8Q AWG 8 25 LFV18-6Q AWG 6 25 LFV14-8Q AWG 8 25 LFV14-6Q AWG 6 25 LFV14-10Q AWG LFV10-6Q AWG 6 25 LFV10-8Q AWG 8 25 LFV10-10Q AWG M Highland Terminals: 3M Highland Butt Splices Insulated Seam Butt Splices Butt Standard Order No. UPC Conductor Size Terminals per Bag BSV18Q AWG 25 BSV14Q AWG 25 BSV10Q AWG 25 PHONE:
6 3M Highland Terminals: 3M Highland Female Disconnects Nylon Fully Insulated Seam Female Disconnects Fastener Orientation Disconnect Fully Insulated Female Nylon Order No. UPC Conductor Size Mates with Male Tab Width (W') Terminals per Bag FDI18-187Q AWG 0.187" 25 FDI18-250Q AWG 0.250" 25 FDI14-187Q AWG 0.187" 25 FDI14-250Q AWG 0.250" 25 FDI10-250Q AWG 0.250" 25 Insulated Seam Female Disconnects Fastener Orientation Disconnect Standard Female Order No. UPC Conductor Size Mates with Male Tab Width (W') Terminals per Bag FDV18-187Q AWG 0.187" 25 FDV18-250Q AWG 0.250" 25 FDV14-187Q AWG 0.187" 25 FDV14-250Q AWG 0.250" 25 FDV10-250Q AWG 0.250" FAX:
PRODUCTS. MrSupply.com
MrSupply.com 3M PRODUCTS Tapes / Terminals, Kits and Tools / Fastening Products / Wire Marking andidentifying / Fire Protection Products / Heat Shrinkable Products / Terminations Table of Contents Tapes
More informationThe Spec-Kon. Example: KV18-6R-M (18) AWG (14) AWG (10) AWG (8) 8 AWG (6) 6 AWG (4) 4 AWG (2) 2 AWG
Overview Crimp, Disconnects, and Splices Thomas & Betts is pleased to introduce crimp terminals, disconnects, and splices. Ideal for OE applications, the line can be used anywhere a high number of terminations
More informationHOLLINGSWORTH Operating Instructions
HOLLINGSWORTH Operating Instructions H20 - Rotary Nest Hand Crimping Tool HOLLINGSWORTH (800) 638-8376 techsuppt@hollingsworth.com www.hollingsworth.com OPERATING INSTRUCTIONS FOR HOLLINGSWORTH H20 ROTARY
More informationHOLLINGSWORTH Operating Instructions
HOLLINGSWORTH Operating Instructions H20 - Rotary Nest Hand Crimping Tool HOLLINGSWORTH (800) 638-8376 techsuppt@hollingsworth.com www.hollingsworth.com H20 Tool - Tool Warranty TOOL WARRANTY Electro-Term/Hollingsworth
More informationMini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No. 63885-0900 FEATURES Œ Directly adapts to most crimp presses and automatic wire processors Œ Applicator designed to industry
More informationMini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No
Mini-Mac Applicator Application Tooling Specification Air Feed-Mylar Tape Order No. 63885-1300 FEATURES Œ Directly adapts to most crimp presses and automatic wire processors Œ Applicator designed to industry
More informationTools. TR-482 Ratchet. TH-450 Scissors Style The most versatile heavy-duty tool we ve ever offered. Made of 1.40" (35,5 mm) highstrength,
Tools TH-440 Scissors Style A compact, high-quality tool designed to perform the six most common electrical wiring functions. Made of 1.125" (28,57 mm) heat-treated carbon steel Handles a variety of terminal
More informationUnderstanding and Making Crimp Connections That Last
Understanding and Making Crimp Connections That Last What are the Basic Process Methods Used to Connect (Terminate) a Wire to Make an Electrical Connection? SOLDER SOLDERLESS WELDED (Ultrasonic Welding)
More informationSEALED CRIMP CONNECTORSTM
SEALED ELECTRICAL SYSTEM It s a Question of Integrity SEALED CRIMP CONNECTORSTM KRIMPA-SEAL TM PRODUCT LINE SEALED FOR QUALITY MINI ASSORTMENTS NSPA-9002 STARTER ASSORTMENTS TM NSPA-5002 NSPA-5003 NSPA-5003-T
More informationACCESSORIES SOLDERLESS TERMINALS CORD END TERMINALS WIRE ITEM NO. L C D FRENCH COLOUR GERMAN COLOUR MM RED BLUE L=27 C=16.5 D=17.
ACCESSORIES SOLDERLESS CORD END ITEM NO. F-E00 LB F-E00 VT F-E00 LB F-E00 VT F-E030 TQ F-E030 PK F-E030 PK F-E030 TQ F-E050 WH F-E050 OR F-E050 WH F-E050 OR F-E750 BU F-E750 WH F-E750 GY F-E750 BU F-E750
More informationSECTION. 1. Terminals for Wire Sizes 26 to 10 AWG Splices and Connectors for Wire Sizes 26 to 8 AWG...18
How to use your catalog This catalog is organized for your convenience in specifying and ordering Hollingsworth Solderless Terminals. The table of Contents lists major sections and highlights the content
More informationCable Ties and Accessories
3M Cable Ties are designed to secure wire bundles and harness components quickly, without slipping. Featuring a self-locking head and a locking mechanism, they are designed to handle temperatures up to
More informationAssembling Instruction. S418 PV Connector M16 Cable Mount
Assembling Instruction S418 PV Connector M16 Cable Mount Electrical Rating: 1000V DC 30A Max. Operation Temperature Range: -40~+90 degree C Caution: 1. Connectors are to be used only to interconnect firmly
More informationHand Crimp Tool Operating Instruction Sheet and Specifications Part No Eng. No. RHT 2749-CC (Replaces )
FEATURES Hand Crimp Tool Operating Instruction Sheet and Specifications Part No. 64001-5200 Eng. No. RHT 2749-CC (Replaces 19285-0025) A full cycle ratcheting hand tool ensures complete crimps Long handles
More informationSCOPE Perma-Seal Terminals and Splices AWG (Rings, Spades, Hooks, 3 and 4-Ways, and Splices). RHT-5770 Hand Crimp Tool
Hand Crimp Tool Operating Instruction Sheet and Specifications Part No. 64001-3200 Eng. No. RHT 5770 (Replaces 19285-0050 and 19285-0143) FEATURES A full cycle ratcheting hand tool ensures complete crimps
More informationHand Crimp Tool Operating Instruction and Specifications Sheet Part No Eng. No. RHT 5770 (Replaces and )
Hand Crimp Tool Operating Instruction and Specifications Sheet Part No. 64001-3200 Eng. No. RHT 5770 (Replaces 19285-0050 and 19285-0143) FEATURES Œ A full cycle ratcheting hand tool ensures complete crimps
More informationSmall HYDENT CatalOG. Connecting Power to Your World. Trust the Burndy Engineered System
Trust the Burndy Engineered System The BURNDY Engineered System of coordinating dies, connectors and tools are always designed to work together and engineered to meet stringent, accepted quality standards.
More informationFile E13288 Vol. 1 Sec. 24 Page 1 Issued: Vol. 22 Sec. 2 Revised: and Report
File E13288 Vol. 1 Sec. 24 Page 1 Issued: 1979-10-01 Vol. 22 Sec. 2 Revised: 2015-08-19 DESCRIPTION PRODUCT COVERED: USL - General use wire connectors, terminals, butt and parallel connectors. Catalog
More information4 GAUGE WIRE CONNECTORS CAR AUDIO E- BOOK
06 May, 2018 4 GAUGE WIRE CONNECTORS CAR AUDIO E- BOOK Document Filetype: PDF 433.14 KB 0 4 GAUGE WIRE CONNECTORS CAR AUDIO E-BOOK Shop speaker wire in the electrical wire & cable section of Lowes.com.
More informationModel Color Wire Combination Range Wire Combination Range (mm) Quantity Cat. No. Box of V. Carton of 1, Gray.
Wire-Nut Wire Connectors Yellow and red Wire-Nut Wire Connectors can easily be applied using the Twist-a-Nut Screwdriver. Five color-coded models cover wire sizes from 22 to 6 AWG Fixed, square-wire spring
More informationELECTRICAL CONNECTIONS
ELECTRICAL CONNECTIONS Lesson 13 EET 150 Electrical Connections Learning Objectives In this lesson you will: see different methods of making electrical connections. learn a procedure for making soldered
More informationNiAc Terminals and Splices
Perma-Seal NiAc Terminals and Splices 22 8 AWG 22 8 AWG Size SA-22-06 6 SA-22-08 8 SA-22-0 0 SA-222-4 /4 6 4 AWG SB-27-06 6 SB-27-08 8 Size SA-226-8 /8 SA-25-06 6 SA-25-08 8 SA-25-0 0 SB-28-8 /8 SB-227-06
More informationFTZ New Products COOL SEAL CLEAR SEAL EXTREME SEAL CORRECT CONNECT MPC CRIMP TOOL SEAMLESS COPPER LUGS. Qua lity Sta tement
FTZ New Products (See page 6) (See page 6) (See page 14) (See page 50) COOL SEAL The patented heat-less, solderless terminal that saves time and money. CLEAR SEAL The latest advancement in heat shrink
More informationFREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B
FREE CLIMBER 4400 ASSEMBLY INSTRUCTIONS 27694B 1 TOOLS REQUIRED: CLAW HAMMER KNIFE 1/2 WRENCH OR SOCKET 1. USE KNIFE TO REMOVE ALL PLASTIC STRAPS FROM AROUND PALLET AND CARTON. STRAP 2. USE CLAW HAMMER
More informationHand Crimp Tool Operating Instruction Sheet And Specifications Part No Eng. No. RHT 5758-CC (Replaces )
Hand Crimp Tool Operating Instruction Sheet And Specifications Part No. 64001-1000 Eng. No. RHT 5758-CC (Replaces 19285-0038) FEATURES A full cycle ratcheting hand tool ensures complete crimps Long handles
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationVS- 3 Hand Tool Kits , , and
VS- 3 Hand Tool Kits 244271-1, 244271-5, and 244271-6 Instruction Sheet 408-7280 Jan 2017 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationExcellent Integrated System Limited
Excellent Integrated System Limited Stocking Distributor Click to view price, real time Inventory, Delivery & Lifecycle Information: Molex Connector Corporation 0640014600 For any questions, you can email
More informationMini-Mac Applicator Specification Sheet Order No
Mini-Mac Applicator Specification Sheet Order No. 63892-1100 FEATURES Œ Directly adapts to most automatic wire processing machines Œ Applicator designed to industry standard mounting and shut height 135.80mm
More informationCatalog Numbering System SOR-8BH S= Solderless Terminals and Connectors
CLASSIFICATION: Catalog Numbering System SOR-8BH S= Solderless Terminals and Connectors INSULATION: A= Butt-Connector I=Insulated B= Block Spade O=Non-Insulated C= Closed End Connector F= Fully-Insulated
More informationHand Crimp Tool Specification Sheet Order No
Hand Crimp Tool Specification Sheet Order No. 63811-2600 FEATURES TYPE 4A % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically designed soft handles % Precisely designed crimping
More informationApplication Tooling Specification Sheet
Mini-Mac Applicator FEATURES Application Tooling Specification Sheet Order No.63832-6400 Directly adapts to most automatic wire processing machines Applicator designed to industry standard mounting and
More informationDESCRIPTION 3. DIE INSTALLATION AND REMOVAL Die Removal (Figure 3) 3.1. Die Installation (Figure 3) Hydraulic Hand Tool
Crimping Dies Instruction Sheet for SOLISTRAND* 08 869 s and Splices 9 APR PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools
More informationSection A pg /28/08 11:07 AM Page 1 A ermination Wire T
A Wire Termination Wire-Nut Wire Connectors Wire Connectors Five color-coded models cover a full range of wire sizes from 22-8 AWG Fixed, square-wire spring creates its own threads maintains a secure positive
More informationMULTI CONNECTION SYSTEM. Product Overview
MULTI CONNECTION SYSTEM Product Overview THE ENTIRE RANGE OF MCS CONNECTORS MICRO Pin spacing: 2. mm Conductor sizes: 0.08 0. mm 2 (28 20 AWG) The Most Compact MCS MICRO Connector System with CAGE CLAMP
More informationSpecifications Approval Type M12 A-coded HARAX M12-L HARAX M12 L 5 poles shielded M12 Crimp General data Electrical characteristics Materials 03 21
M12 A-coding Specifications IEC 60 352-4 Approval A-coding acc. to IEC 61 076-2-101 Circular Connectors Technical characteristics M12 A-coding Type M12 A-coded HARAX M12-L 5 poles HARAX M12 L shielded
More informationMACHINE SCREWS nickel plated steel 100/pkg PIX THREAD/HEAD 3/16" 1/4" 3/8" 1/2" 5/8" 3/4" 1" 1¼" 1½" 2" *Not a stock item at Ack (special order).
HARDW 4-40 6-32 MACHINE S nickel plated steel PIX THREAD/HEAD 3/16" 3/8" 1/2" 5/8" 3/4" 1" 1¼" 1½" 2" 4-40 BINDER - F-020-C - F-021-C - F-022-C - - - - 6-32 BINDER F-502-C F-503-C F-504-C F-014-C F-621-C
More informationQSLVM2500 QSLV-M Cold Shrink Insulator
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 QSLVM2500 QSLV-M 2-500 Cold Shrink Insulator Minnesota Mining (3M) Catalog Number Manufacturer Description Weight per
More informationSOLISTRAND* Crimping Dies
SOLISTRAND* Crimping Dies Instruction Sheet (Used in Crimping Heads 08-697 69097 and 69099) 5 APR Terminals Butt Splices Parallel Splices = Wire Barrel DIE SET NUMBERS FOR DIE SET CRIMPING HEAD 69097 NUMBERS
More informationMicro-Change. Cordset Family
Side Tab Cordset Family Small Space? Big Solution. When space and time are in short supply, look no further than Brad Harrison brand for the best, ready-made m connector solutions. For fast, compact migration
More informationHand Crimp Tool Operating Instruction Sheet And Specifications Part No Eng. No. RHT 1752 (Replaces )
FEATURES Hand Crimp Tool Operating Instruction Sheet And Specifications Part No. 64003-1200 Eng. No. RHT 1752 (Replaces 19284-0011) Œ Œ Œ A full cycle ratcheting hand tool ensures complete crimps Long
More informationUR Awg Butt Connector Box
19-26 Awg Butt Box Minnesota Mining (3M) Catalog Number Manufacturer Description Weight per unit Product Category Features Connection Type Maximum Insulation Wire Size Wire Type Descriptions Additional
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationDouble thick tongue. Tongue Wire Stud Hole CT-930, CT-930CH, S4-10R-E
Type S-R Seamless tubular barrel Beveled wire lead-in Tubular Ring Terminal, Non-Insulated Double thick tongue A. B.Cable Ties B L T W Inspection Window Min. Tensile Strength of Tubular Ring Terminals
More informationCrimping Dies for SOLISTRAND* Terminals and Splices
ORIGINAL INSTRUCTIONS Crimping Dies for SOLISTRAND* Terminals and Splices Instruction Sheet 408-8691 02 AUG 18 Rev H1 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use
More informationTHE TOOLS RECOMMENDED Phillips Screwdriver Stripper/Crimper Electrician Pliers ½ open end wrench or ratchet wrench with ½ deep socket Utility knife
16 X 20 HEATER ELEMENT WIRE CONNECTION REPAIR DK20/A/S/SP The following instructions are on the repair of a potentially faulty wire connection in your 16 x 20 heat platen. It is recommended that only those
More informationApplication Tooling Specification Sheet Order No
Hand Crimp Tool Insulkrimp Application Tooling Specification Sheet Order No. 64001-0400 Engineering No. RHT 1994 FEATURES A full cycle ratcheting hand tool ensures complete crimps Long handles for comfortable
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves the low profile.. Insulation Displacement Area Protected by
More informationHan High Temp. Description. Design overview. Han High Temp connectors remain robust and reliable for their entire lifespan!
Han High Temp Description Han High Temp is a new product series that is based on our well-established Han B and Han E series. We used high-quality materials with wide temperature ranges to produce connectors
More informationResist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage
Heat Seal & Resist water & condensation Resist salt & other contaminants Resist wire pull out & current leakage Who Uses Heat Shrink : Heavy Duty Trucking Marine & RV Plant Maintenance Departments OEM
More informationTerminals and Splices 19 OCT 11 Rev D. Crimping Dies for Head Numbers 69065, 69067, and Hand Tool Yoke. Place Screwdriver Here to Remove Dies
Instruction Sheet Crimping Dies for SOLISTRAND* 408-9786 Terminals and Splices 19 OCT 11 PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.
More informationButt Connectors. 3M Butt Connectors Non-Insulated Seamless. 3M Butt Connectors Non-Insulated Brazed Seam FAX TERMINALS, KITS AND TOOLS
Butt Connectors 3M Butt Connectors Non-Insulated Seamless Wire Range Thickness Barrel ength Barrel I.D. M18BCX 22187 22-18 0.63 0.031 0.28 0.062 100 500 M18BCK 01311 22-18 0.63 0.031 0.28 0.062 1000 M14BCX
More informationFILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT
04 July, 2018 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Document Filetype: PDF 293 KB 0 FILE // 4 GAUGE TERMINAL CONNECTORS DOCUMENT Alibaba.com offers 124 4 gauge wire connectors products. Unique Bargains
More informationJUN FEATURE 2014 PRODUCT OF THE
JUN 2014 FEATURE PRODUCT OF THE MONTHPage 1 Tools Self-Igniting Butane Torches Torches / Crimpers / Stripper / Heat Gun Up to 2500 flame temperature Safety lock and continuous burning lock With Piezo ignition,
More informationGeneral characteristics and technical data Series VarioPro Basic
General characteristics and technical data Series VarioPro Basic Series Electrical values Operating voltage (DC) Test voltage (DC) 8 kv 12 kv Housing HV- 1-2 Insulation material Flammability class POM
More informationWiring of the Main Distribution Panelboard
Job Sheet 4 Wiring of the Main Distribution Panelboard OBJECTIVE To connect the service-entrance conductors. To ground the main distribution panelboard (MDP). To wire a branch circuit supplying a three-phase
More informationTerminal Replacement Procedures
HOW TO REPLACE CONNECTOR TERMINALS The terminal repair kits provide necessary tools and materials (terminals, wire seals, and splice connectors) to repair many damaged or faulty connector terminals. However,
More informationHand Crimp Tool Operating Instruction And Specifications Sheet Order No Eng. No. RHT 7050 (Replaces )
RHT7050 Hand Crimp Tool Hand Crimp Tool Operating Instruction And Specifications Sheet Order No. 64001-0900 Eng. No. RHT 7050 (Replaces 19285-0053) FEATURES Œ Œ Œ A full cycle ratcheting hand tool ensures
More informationApplication Tooling Specification Sheet
Modular Crimp Head Order No. 63811-5970 FEATURES Application Tooling Specification Sheet TYPE 4A Hand Crimp Tool Order No. 63811-5900 % A full cycle ratcheting hand tool ensures complete crimps % Ergonomically
More informationCOPALUM Terminals and Splices (For Solid & Stranded Aluminum or Copper Wire)
Product Facts Bar Crimp Technique Terminals and Splices for aluminum-to-aluminum and aluminum-to-copper stripped wire applications Terminates stripped, stranded and solid (round or rectangular) aluminum
More informationUPC-LL Power Connection Kit
Installation Instructions UPC-LL Power Connection Kit for Series Long Line Heating Cables 1 PJ951 161-562681-020 July 2015 UPC-LL End Termination Kit Kit Contents Item Qty Description Item Qty Description
More informationHE Insert Series. Application Specification Apr 26 th, 2016 Rev. A. Table of contents
HE Insert Series Table of contents 1. INTRODUCTION... 2 2. SUPPORTING DOCUMENTS... 2 2.1. Customer drawings... 2 2.2. Product specification... 2 2.3. Application Specification... 2 2.4. Standards... 2
More informationCrimping Dies; PN thru 47825, 47915, and 47918
Crimping Dies; PN 47820 thru 47825, 47915, and 47918 Instruction Sheet 408-1729 22 NOV 16 Rev K Crimping Dies; PN 47820 thru 47825, 47915, and 47918 (Typical) Crimping Die Wire Size Part Number Color Code
More informationC 0.05" ALLEN WRENCH. Installation Instructions for Cirrus Channel Suspension T1 with 4" Square or Round Canopy. Section One: Adjusting Cable Position
Doc # 90-CST-SQ_0 W. Fullerton Chicago, IL 0 Ph:.0.9 Fax:.9. www.pureedgelighting.com info@pureedgelighting.com 0 PureEdge Lighting. All Rights Reserved. Installation Instructions for Cirrus Channel Suspension
More informationCOOLEDGE TILE GEN2 INTERIOR-TUNABLE WHITE INSTALLATION MANUAL
5 YEAR SYSTEM WARRANTY 5 YEAR SYSTEM WARRANTY COOLEDGE TILE GEN2 INTERIOR-TUNABLE WHITE INSTALLATION MANUAL Cutout TILE TILE Insulating Patches Jumper Cable T-Cable End Cap Cable Clamp Power Supply Control
More informationInstallation Instructions for Cirrus Suspension Downlight with Power - End Feed. Section One: 4" Flush Canopy Version
Doc # 0-CSP-E_0 W. Fullerton Chicago, IL 606 Ph:.0. Fax:..6 www.pureedgelighting.com info@pureedgelighting.com 06 PureEdge Lighting. All Rights Reserved. Installation Instructions for Cirrus Suspension
More informationHARAX. Contents Technical characteristics circular connector with HARAX rapid termination 50.02
Contents Page Technical characteristics circular connector with rapid termination 50.02 Circular connector M8/M12 with rapid termination... 50.05 Han M12 panel feed-through... 50.08 Han M12 pcb adapter...
More informationRoHS. Standard Terminals & Splices. Pre-Insulated Euro-Crimp. Ready
RoHS Ready Standard Terminals & Splices Pre-Insulated Engineering Notes 2 Contents Page Introduction... 4 Performance Specifications...5 Table isting: Circular Mil Area (CMA) for Popular Wire Sizes...6-7
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More information2.5mm Pitch Connector for Discrete Wire Connection
.mm Pitch Connector for Discrete Wire Connection DF1 Series Jul.1.1 Copyright 1 HIROSE ELECTRIC CO., LTD. All Rights Reserved. Features 1. Board Mounting Height (Crimping Type) mm.mm pitch connector achieves
More informationAMP Power Lock Connectors
Product Facts High current handling capability: 31 or 53 amperes maximum depending on application (reference product specs) Modular housings for multiple connector applications Assortment of mounting accessories
More informationApplication Tooling Specification Sheet
FineAdjust Applicator FEATURES Application Tooling Specification Sheet Order No. 63901-9400 Directly adapts to most automatic wire processing machines Quick punch removal with the push of a button for
More informationService Bulletin Terminal Replacement Instructions (Replaces , dated May 2, 1995) December 18, 2000 ALL
Service Bulletin 00-039 Applies To: ALL December 18, 2000 Terminal Replacement Instructions (Replaces 95-007, dated May 2, 1995) These terminal replacement instructions apply to these kits and tools: Terminal
More informationApplication Tooling Specification Sheet
Mini-Mac Applicator FEATURES Application Tooling Specification Sheet Order No. 63891-4000 Directly adapts to most automatic wire processing machines Applicator designed to industry standard mounting and
More informationSSL - Discrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationHAND CRIMP TOOL SPECIFICATION SHEET Order No
HAND CRIMP TOOL SPECIFICATION SHEET Order No. 63811-9200 FEATURES TYPE 7 A full cycle ratcheting hand tool ensures complete crimps A precision user-friendly terminal locator wire stop holds terminals in
More informationDiscrete Wire IDC Contact & Cap
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationChamfered/Funneled Terminal Barrel Entry
Why Sta-Kon Terminals Are Better Chamfered Funnel Barrel Entry. Selectively annealed long barrel. Longer barrel design. Colour-code Fluoropolymer, Nylon or Vinyl Insulators. Brazed or overlapping seams.
More informationApplication Tooling Specification Sheet
HAND CRIMP TOOL FEATURES Application Tooling Specification Sheet TYPE 7 Order No. 63811-9200 A full cycle ratcheting hand tool ensures complete crimps A precision user-friendly terminal locator wire stop
More informationData Signal Voice. General Purpose Crimpers
General Purpose Crimpers The Greenlee professional KWIK CYCLE crimping systems consist of two crimp tool platforms with over 40 interchangeable crimping dies! Manually crimp to factory specifications coaxial
More informationJCN cables. The. splice is an
Molded Rubber Splices 15kV 3M molded rubber QS and QS-II kits are inline splices made from specially formulated, peroxide-cured, EPDM rubbers to ensure a stable seal and a splice that will last the life
More informationMETRI-PACK 2016 FEATURE PRODUCT JUL. Sealed Connector Systems OF THE MONTH. Weather-Pack And Deutsch Connector. tifcoonline.
JUL METRI-PACK 2016 Weather-Pack And Deutsch Sealed Systems FEATURE PRODUCT OF THE MONTH www.tifco.com tifcoonline.com Phone: 800.868.4326 Fax: 800.535.4619 tifco@tifco.com Main Office: Houston, TX Branch
More informationTED-300-OG- SMC ORDERING GUIDE FOR Single Wire & Multipair Connectors
TED-300-OG- SMC ORDERING GUIDE FOR Single Wire & Multipair Connectors Kunt Elektronik San. Tic. A.S Technical Support Atatürk Bulvarı NO: 216 34670 İkitelli - Istanbul Türkiye CONTENTS ISSUE AND AMENDMENT
More informationQuality. Value. Product Availability.
Quality. Value. Product Availability. When The Best Connection was founded more than 35 years ago we had one focus... to shake up the wiring accessories industry... and we did. How? We did it by providing
More informationINSTALLATION INSTRUCTIONS FOR FLUSH MOUNT FIXTURES
Kurt Versen Company Point Source Lighting 10 Charles Street Westwood, New Jersey Models with Square or Rectangular Apertures 1 PLEASE READ THIS ENTIRE INSTRUCTION SHEET BEFORE INSTALLATION. 2 DISCONNECT
More information3M Scotchlok Insulated Electrical Spring Connector B (Blue)
3M Scotchlok Insulated Electrical Spring Connector B (Blue) Data Sheet November 2008 Application Use 3M Scotchlok Insulated Electrical Spring Connector B (Blue) to electrically connect two or more conductor
More informationENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC 5XX. Wire Gauge Size
The 917X series of surface mount Insulation Displacement Connectors (IDC) were developed to meet the harsh automotive and industrial market applications for connecting individual wires directly to a PCB
More informationConnectors - Crimp Terminals
Technical portal and online community for Design Engineers - www.element14.com 11 Connectors - Crimp Terminals Page Page Bootlace Ferrules... 11 Non Insulated Crimp Terminals... 1315 Heat Shrink Terminals...
More informationAmphenol RF. MMCX Micro-Mate (MMCX) Connectors MMCX. Description. Features/Benefits. Applications
Amphenol RF 14 Micro-Mate () Connectors Description (also called MicroMate TM ), is a micro-miniature connector series with a snap-lock mechanism allowing for 360 degrees rotation enabling flexibility
More informationHAND CRIMP TOOL Operating Instruction and Specification Sheet Order No
HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No. 63811-1200 FEATURES Small handle spread which make this style tool ideally suited for end users Ratchet with safety release that
More informationHow to Hard- Wire your Zumo 665 to the Slingshot Infotainment Center
How to Hard- Wire your Zumo 665 to the Slingshot Infotainment Center You need a Zumo 665 kit that comes with Your Zumo 665. If you left it on a bike that you traded, then go to garmin. com or Amazon. com
More informationM2 Antenna Systems, Inc. Model No: 436CP30
M2 Antenna Systems, Inc. Model No: 436CP30 SPECIFICATIONS: Model... 436CP30 Frequency Range... 432 To 440 MHz *Gain... 15.50 dbic Front to back... 18 db Typical Elipticity... 1.5 db Typical Beamwidth...
More informationApplication Tooling Specification Sheet
Extractor Tool FEATURES Application Tooling Specification Sheet Order No. 63813-2700 This Extractor Tool is for the removal of Wire-to-Wire and Wire-to-Board terminal series in both plug and receptacles.
More informationLINESSE LINEAR LUMINAIRE 3 CEILING MOUNT CM2420
Linesse Linear Luminaire 3 Ceiling Mount LINESSE LINEAR LUMINAIRE 3 CEILING MOUNT Page 2: Warnings Page 3: Mounting Configurations Page 4: Power Feed Page 5: Surface Mounting Page 6: Threaded Rod Mounting
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More information3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III. Easy Installation. High reliability.
3M Electrical Markets Division 3M Cold Shrink Silicone Rubber Splices QS-III Easy Installation. High reliability. power cable splicing Revolutionizing with Cold Shrink The 3M Cold Shrink Silicone Rubber
More informationEOS LED Surface Mounted Luminaire
Installation Instruction Sheet INSTALLATION INSTRUCTIONS FOR JOINING AND SUSPENDING FIXTURES WARNING WARNING To reduce the risk of death, injury or property damage from fire, electric shock, cuts, abrasions,
More informationPrint Your Way to Savings
VALID FROM MAY 1, 2012 THROUGH AUGUST 31, 2012 Print Your Way to Savings Purchase 15 cassettes at participating distributors and receive a FREE LS8EQ Printer and Easy-Mark Software * : ENHANCE PRODUCTIVITY
More informationHOW TO SELECT THE PROPER CRIMP TERMINAL
HOW TO SELECT THE PROPER CRIMP TERMINAL Part # Example R Tongue 4 Barrel Type B Wire Range 6 Stud Size S Special Tongue R = Ring BS = Block Spade B = Butt Splice CFR = Female Disconnect, fully insulated
More information