Print Your Way to Savings

Transcription

1 VALID FROM MAY 1, 2012 THROUGH AUGUST 31, 2012 Print Your Way to Savings Purchase 15 cassettes at participating distributors and receive a FREE LS8EQ Printer and Easy-Mark Software * : ENHANCE PRODUCTIVITY Innovative QWERTY keypad delivers faster text entry and label design on-site, or increase functionality with PC interface and Easy-Mark Labeling Software in the office IMPROVE INSTALLATION Supports nearly 150 label sizes and media types with fast loading P1 Label Cassettes for high quality, durable identification SIMPLIFY LABEL CREATION Up to $ 500 Value Built-in capabilities help design alpha/numeric serialization, barcodes, symbols, data/time stamps, and much more *Promotion details and redemption form on the back of this flyer.

2 VALID FROM MAY 1, 2012 THROUGH AUGUST 31, 2012 IN THE US AND CANADA ONLY Redemption: Purchase Qualifying products (purchased cassettes must be from distributor inventory on a single invoice) *Claim Fully complete claim form **Submit Mail, fax or claim form and invoice Receive Free printer delivered within 2 6 weeks of submission *Claim Form: Date: Contact Name: Company: Address: **Submit: Completed claim form and invoice indicating qualifying purchase should be addressed Attention: Panduit ID Promotion and sent to one of the three options listed below: 1. Mail: The Shamrock Companies 200 Hasting Road Buffalo Grove, IL Fax: Panduitpromo@shamrockcompanies.net Cut off for submissions to redemption center is October 1, 2012 City: State/Prov.: Zip Code/Postal Code: Restrictions: Purchased cassettes must be from distributor inventory Limit 2 offers per customer No restrictions on cassette purchase price Phone Number: Address: Distributor Name: Distributor Location:

3 ELECTRICAL SOLUTIONS Hand Operated Plier Type Tools Installer controlled crimp Available with wire stripping and cutting features Plier type crimp for #22 10 AWG insulated and non-insulated terminal products A. System Overview B1. Cable Ties Part Number Part Description B2. Cable Accessories CT-260 CT-200 CT-160 CT-260 CT-200 CT-160 CT-100A Crimps most Panduit #22 10 AWG insulated and non-insulated terminals. Forged steel tool. Cuts wire. Forged steel tool. Crimps most Panduit #22 10 AWG non-insulated terminals, disconnects and splices. Cuts wire. Crimps most Panduit #22 10 AWG insulated and non-insulated terminals disconnects and splices. Cuts three U.S. and three metric screw sizes. Cuts and strips wire. Has insulation closure pocket. Crimps most Panduit #22 10 AWG insulated and non-insulated terminals, disconnects, and splices. Cuts #4, #6, #8 and #10 screw sizes. Cuts and strips wire. Excellent all-around application tool of heat treated finished steel with comfortable cushioned plastic grip handles B3. Stainless Steel Ties C1. Wiring Duct C2. Surface Raceway C3. Abrasion Protection C4. Cable Management CT-100A D1. Terminals D2. Power Connectors Wire and Cable Stripping Tools Strips and cuts #20 10 AWG wire Lightweight and durable for comfortable long use Rust resistant coating included to improve durability of tool D3. Grounding Connectors E1. Labeling Systems Part Number Wire Range (O.D.) Part Description CST115 #20 10 AWG Plier nose wire stripper. 1 E2. Labels E3. Pre-Printed & Write-On Markers E4. Permanent Identification E5. Lockout/ Tagout & Safety Solutions F. Index For technical assistance in the U.S., call (outside the U.S., see inside back cover for directory) D1.83

4 Convenience Pack Terminals These convenience packs are ideal for construction and MRO applications. Easy to use locate and manage terminals with a clear package showing industry color coding Convenient storage accessible smaller packaging is resealable and reusable Compatible with Panduit terminal kits delivers ultimate flexibility for a range of job site applications Smaller packaging option provides high quality product at an affordable price Part Number UPC Codes Wire Range Stud Size Description Terminals PN18-6R-E AWG #6 Ring terminal, nylon insulated 20 PN18-8R-E AWG #8 Ring terminal, nylon insulated 20 PN18-10R-E AWG #10 Ring terminal, nylon insulated 20 PN14-6R-E AWG #6 Ring terminal, nylon insulated 20 PN14-8R-E AWG #8 Ring terminal, nylon insulated 20 PN14-10R-E AWG #10 Ring terminal, nylon insulated 20 PN14-14R-E AWG 1/4" Ring terminal, nylon insulated 20 PN10-8R-E AWG #8 Ring terminal, nylon insulated 20 PN10-10R-E AWG #10 Ring terminal, nylon insulated 20 PN10-12R-E AWG 1/2" Ring terminal, nylon insulated 20 PN10-14R-E AWG 1/4" Ring terminal, nylon insulated 20 PN10-38R-E AWG 3/8" Ring terminal, nylon insulated 20 PNF14-10R-E AWG #10 Ring terminal, nylon insulated, 20 funnel entry PN18-6F-E AWG #6 Fork terminal, nylon insulated 20 PN18-8F-E AWG #8 Fork terminal, nylon insulated 20 PN14-6F-E AWG #6 Fork terminal, nylon insulated 20 PN14-8F-E AWG #8 Fork terminal, nylon insulated 20 PN14-10F-E AWG #10 Fork terminal, nylon insulated 20 PN10-8F-E AWG #8 Fork terminal, nylon insulated 20 PN10-10F-E AWG #10 Fork terminal, nylon insulated 20 PN18-6LF-E AWG #6 Locking fork terminal, nylon insulated 20 PN14-8LF-E AWG #8 Locking fork terminal, nylon insulated 20 PN10-10LF-E AWG #10 Locking fork terminal, nylon insulated 20 PNF14-8F-E AWG #8 Fork terminal, nylon insulated, 20 funnel entry PK18-6R-E AWG #6 Ring terminal, KYNAR* insulated 20 PK14-8R-E AWG #8 Ring terminal, KYNAR* insulated 20 PK14-10R-E AWG #10 Ring terminal, KYNAR* insulated 20 PK10-10R-E AWG #10 Ring terminal, KYNAR* insulated 20 PV18-6R-E AWG #6 Ring terminal, vinyl insulated 20 PV18-8R-E AWG #8 Ring terminal, vinyl insulated 20 PV18-10R-E AWG #10 Ring terminal, vinyl insulated 20 PV18-14R-E AWG 1/4" Ring terminal, vinyl insulated 20 PV14-6R-E AWG #6 Ring terminal, vinyl insulated 20 PV14-8R-E AWG #8 Ring terminal, vinyl insulated 20 PV14-10R-E AWG #10 Ring terminal, vinyl insulated 20 PV14-14R-E AWG 1/4" Ring terminal, vinyl insulated 20 PV14-10RX-E AWG #10 Ring terminal, vinyl expanded insulation 20 PV10-6R-E AWG #6 Ring terminal, vinyl insulated 20 PV10-8R-E AWG #8 Ring terminal, vinyl insulated 20 PV10-10R-E AWG #10 Ring terminal, vinyl insulated 20 PV10-14R-E AWG 1/4" Ring terminal, vinyl insulated 20 PV10-56R-E AWG 5/16" Ring terminal, vinyl insulated 20 PV10-38R-E AWG 3/8" Ring terminal, vinyl insulated 20 PV18-6F-E AWG #6 Fork terminal, vinyl insulated 20 PV18-6LF-E AWG #6 Locking fork terminal, vinyl insulated 20 PV18-8F-E AWG #8 Fork terminal, vinyl insulated 20 PV18-8LF-E AWG #8 Locking fork terminal, vinyl insulated 20 PV18-10F-E AWG #10 Fork terminal, vinyl insulated 20

5 Part Number UPC Codes Wire Range Stud Size Description Terminals PV14-6F-E AWG #6 Fork terminal, vinyl insulated 20 PV14-6LF-E AWG #6 Locking fork terminal, vinyl insulated 20 PV14-8F-E AWG #8 Fork terminal, vinyl insulated 20 PV14-8LF-E AWG #8 Locking fork terminal, vinyl insulated 20 PV14-10F-E AWG #10 Fork terminal, vinyl insulated 20 PV14-10LF-E AWG #10 Locking fork terminal, vinyl insulated 20 PV10-6F-E AWG #6 Fork terminal, vinyl insulated 20 PV10-8F-E AWG #8 Fork terminal, vinyl insulated 20 PV10-8LF-E AWG #8 Locking fork terminal, vinyl insulated 20 PV10-10F-E AWG #10 Fork terminal, vinyl insulated 20 PV10-10LF-E AWG #10 Locking fork terminal, vinyl insulated 20 PV10-14F-E AWG 1/4" Fork terminal, vinyl insulated 20 P14-10R-E AWG #10 Ring terminal, non-insulated 20 P14-14R-E AWG 1/4" Ring terminal, non-insulated 20 P10-10R-E AWG #10 Ring terminal, non-insulated 20 P10-10RHT6-E AWG #10 Ring terminal, non-insulated, 20 high temperature P10-14R-E AWG 1/4" Ring terminal, non-insulated 20 P14-8F-E AWG #8 Fork terminal, non-insulated 20 Pin Terminals PV18-P47-E AWG Pin terminal, vinyl insulated 20 PV14-P47-E AWG Pin terminal, vinyl insulated 20 PV10-P55-E AWG Pin terminal, vinyl insulated 20 Disconnects DNF18-110FIB-E AWG Female disconnect, nylon F.I. 20 DNF18-111FIB-E AWG Female disconnect, nylon F.I. 20 DNF18-250FIB-E AWG Female disconnect, nylon F.I. 20 DNF14-188FIB-E AWG Female disconnect, nylon F.I 20 DNF14-250FIB-E AWG Female disconnect, nylon F.I. 20 DNF10-250FIB-E AWG Female disconnect, nylon F.I. 20 DNF10-250FI-E AWG Female disconnect, nylon F.I. 20 DNF10-250FIMB-E AWG Male disconnect, nylon F.I. 20 DNF E AWG Female disconnect, nylon barrel insulated 20 DNF E AWG Female disconnect, nylon barrel insulated 20 DNF E AWG Female disconnect, nylon barrel insulated 20 DNF E AWG Female disconnect, nylon barrel insulated 20 DNF18-250FIM-E AWG Male disconnect, nylon F.I. 20 DNF14-250FIM-E AWG Male disconnect, nylon F.I. 20 DNF14-250M-E AWG Male disconnect, nylon barrel insulated 20 DNFR18-250FIB-E AWG Female disconnect, right angle, nylon F.I. 20 DNFR14-250FIB-E AWG Female disconnect, right angle, nylon F.I. 20 DV18-250B-E AWG Female disconnect, vinyl barrel insulated 20 DV14-250B-E AWG Female disconnect, vinyl barrel insulated 20 DV14-250MB-E AWG Male disconnect, vinyl barrel insulated 20 DV E AWG Female disconnect, vinyl barrel insulated 20 DV18-250P-E AWG Piggyback disconnect, vinyl 20 barrel insulated DV14-250P-E AWG Piggyback disconnect, vinyl 20 barrel insulated Butt Splices BS14-E AWG Butt splice, non-insulated 20 BS10-E AWG Butt splice, non-insulated 20 BSN18-E AWG Butt splice, nylon insulated 20 BSN14-E AWG Butt splice, nylon insulated 20 BSN10-E AWG Butt splice, nylon insulated 20 BSV18X-E AWG Butt splice, vinyl insulated 20 BSV14X-E AWG Butt splice, vinyl insulated 20 BSV10X-E AWG Butt splice, vinyl insulated 20 WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario Phone: PANDUIT EUROPE LTD. London, UK Phone: PANDUIT SINGAPORE PTE. LTD. Republic of Singapore Phone: PANDUIT JAPAN Tokyo, Japan Phone: PANDUIT LATIN AMERICA Jalisco, Mexico Phone: PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia Phone: For a copy of Panduit product warranties, log on to For more information Visit us at Contact Customer Service by cs@panduit.com or by phone: and reference TMFL Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. WW-TMFL05 9/2009

6 Dome-Top Barb Ty Cable Ties The two-piece design incorporates a stainless steel locking barb which provides infinite adjustability through entire bundle range. High loop tensile strength exceeds industry standards and the patented low thread force design reduces operator fatigue and improves productivity. This comprehensive product line offers several styles, materials, and colors for a broad range of applications that require high strength and superior performance. Key Features Dome-Top head Stainless steel locking barb High tensile strength Low thread force Benefits Smooth, round edges; easy for installers to handle Provides consistent performance, reliability, and infinite adjustability through entire bundle range Exceeds industry and Aerospace Standards SAE AS23190A; available in four tensile strengths Reduces installer fatigue; increases productivity Anti-slip strap body Ribbed and stippled strap body prevents axial and lateral movement Finger tip grip Exclusively designed finger grip assures positive grip during threading of tie Curved tip (except light-heavy) Orients tip toward head for faster initial threading to speed installation; easy to pick up from flat surfaces Applications Dome-top head with smooth, round edges Infinite adjustability Anti-slip strap body and finger tip grip Comprehensive selection

7 Dome-Top Barb Ty Cable Ties Locking Ties Bundle wires or cables quickly and easily Infinite adjustability Clamp Ties Used to secure a cable bundle to another surface such as a control panel, communication rack, wall, or ceiling Design allows for bundling before or after screwing clamp in place Max. Bundle Part Number Length Diameter Miniature Cross Section BT1M-C 4.0 (102) 0.90 (23) BT1.5M-C 6.3 (160) 1.50 (38) BT2M-C 7.9 (201) BT4M-C 14.2 (361) 4.00 (102) Intermediate Cross Section BT1.5I-C 6.1 (155) 1.50 (38) BT2I-C 8.0 (203) BT3I-C 11.3 (287) 3.00 (76) BT4I-C 14.3 (363) 4.00 (102) Standard Cross Section BT2S-C 8.0 (203) BT3S-C 12.0 (305) 3.00 (76) BT4S-C 15.1 (384) 4.00 (102) Light-Heavy Cross Section (Straight tip) BT2LH-L 8.7 (221) BT3LH-L 11.8 (300) 3.00 (76) BT4LH-L 14.9 (378) 4.00 (102) BT5LH-L 18.1 (460) 5.00 (127) BT6LH-L 21.2 (538) 6.00 (152) BT7LH-L 24.4 (620) 7.00 (178) BT8LH-L 27.5 (699) 8.00 (203) BT9LH-L 30.7 (780) 9.00 (229) BP, BW designs Min. Loop Tensile Strength Lbs. (N) 18 (80) 40 (178) 50 (222) Push-Mount Ties Used to attach bundles to another surface such as a flat panel; combines cable tie, mount, and fastener into a single part Anchor is easily pressed into a pre-formed hole and locks in place Wing design (BW) provides constant tension for a stable, secure, and rattle-free installation Wingless design (BP) allows tie to be used in confined areas Bulk Length Part Number Intermediate Cross Section (Wing design) BW1.5I-D 6.6 (168) Max. Panel Thickness (2.4) Max. Bundle Diameter 1.50 (38) Standard Cross Section (Wing design) BW2S-D 8.5 (216) BW3S-D 12.5 (318) (4.0) (4.0) Standard Cross Section (Wingless design) BW2S-D0 8.5 (216) BP2S-D0 8.5 (216) (4.0) (3.2) 120 (534) Min. Loop Tensile Strength Lbs. (N) 40 (178) (222) (76) 50 (222) 50 (222) Length Part Number Miniature Cross Section BC1M-S4-M 4.6 (117) BC2M-S4-M 8.3 (211) Intermediate Cross Section BC1.5I-S8-M 6.6 (168) Standard Cross Section BC2S-S10-C 8.5 (216) BC3S-S10-D 12.5 (318) BC4S-S10-C 15.6 (396) Bulk Part Number Marker Type Hole Diameter Write-On Area (3.1) (3.1) (4.4) (5.1) (5.1) (5.1) Light-Heavy Cross Section (Straight tip) BC4LH-S25-L 15.5 (394) (6.6) Length Miniature Cross Section BF1M-C Flag 4.6 BF2M-C Flag 0.36 x 0.81 (9.1 x 20.6) (117) 8.3 (211) BM1M-C Wrap x 1.09 (107) BM2M-C Wrap (7.4 x 27.7) 7.9 (201) Standard Cross Section BM2S-C Wrap 0.49 x 0.91 (12.4 x 23.1) BM4S-C Wrap 0.50 x 2.13 (12.7 x 54.1) B2M2S-D Wrap 1.15 x 0.91 (29.2 x 23.1) B3M2S-TL Wrap 1.81 x 0.91 (46.0 x 23.1) B4M2S-TL Wrap 2.47 x 0.91 (62.7 x 23.1) Marker and Flag Ties Used to fasten and identify bundles at the same time Can be marked with Panduit marker pens or custom imprinted with text, symbols, logos, website addresses, sequential numbering, phone numbers, or graphics using Panduit Custom Imprinting Service 8.0 (203) 15.1 (384) 8.0 (203) Max. Bundle Diameter Max. Bundle Diameter 0.90 (23) 0.90 (23) 4.00 (102) Min. Loop Tensile Strength Lbs. (N) 0.90 (23) 18 (80) 1.50 (38) 3.00 (76) 4.00 (102) 4.00 (102) 40 (178) 50 (222) 120 (534) Min. Loop Tensile Strength Lbs. (N) 18 (80) 50 (222) 2

8 Material and Color Chart Panduit Material Color Suffix Nylon 6.6 Natural Weather Resistant Nylon 6.6 Black 0 Nylon 6.6 Brown 1 Nylon 6.6 Red 2 Nylon 6.6 Orange 3 Nylon 6.6 Yellow 4Y Nylon 6.6 Green 5 Nylon 6.6 Blue 6 Denotes Panduit Natural Nylon 6.6 (no suffix). Panduit Material Color Suffix Nylon 6.6 Purple 7 Nylon 6.6 Gray 8 Nylon 6.6 White 10 Nylon 6.6 Telephone Gray 14 Nylon 6.6 Black 20 Heat Stabilized Nylon 6.6 Black 30 Heat Stabilized Nylon 6.6 Natural 39 Flame Retardant Nylon 6.6 Ivory 69 Heat Stabilized Weather Resistant Nylon 6.6 Black 300 Part Number Availability List Standard Packaging Bulk Packaging Natural Natural Part Number Nylon 6.6 Material/Color Suffix Part Number Nylon 6.6 Material/Color Suffix BC1M-S4-M 0 BC2M-S4-M 0 BC1.5I-S8-M 0 BC2S-S10-C 0 BC2S-S10-D 0 BC3S-S10-D 0 BC4S-S10-C 0 BC4S-S10-D 0,30 BC4LH-S25-L 0 BC4LH-S25-TL 0 BF1M-C BF1M-M 0 BF2M-C BF2M-M 0 BM1M-C BM1M-M 0 BM2M-C BM2M-M 0 BM2S-C BM2S-D 0 BM4S-C BM4S-D 0 BP2S-D 0 BT1M-C 0,30 BT1M-M 0,1,2,3,4Y,5,6,7,8,10,30,39,69,300 BT1M-XMR 0,30 BT1.5M-C 0 BT1.5M-M 0,30,69 BT1.5M-XMR 0,30 BT2M-C 0 BT2M-M 0,2,3,4Y,5,6,8,30 BT4M-C 0 BT4M-M 0 BT1.5I-C 0 BT1.5I-M 0,1,2,3,4Y,5,6,7,8,10,30,39 BT2I-C 0 BT2I-M 0,30,300 BT3I-C 0 BT3I-M 0,14,30,69 BT4I-C 0 BT4I-M 0,14 BT2S-C 0 BT2S-M 0,1,2,3,4Y,5,6,7,8,10,20,30,39,69,300 BT3S-C 0,2 BT3S-M 0,30,39,69,300 BT4S-C 0 BT4S-M 0,2,3,4Y,5,6,7,8,10,30,39,300 BT2LH-L 0 BT2LH-TL 0,300 BT3LH-L 0 BT3LH-TL 0 BT4LH-L 0 BT4LH-TL 0,30,39,69,300 BT5LH-L 0 BT5LH-C 0,300 BT6LH-L 0 BT6LH-C 0,69,300 BT7LH-L 0 BT7LH-C 0 BT8LH-L 0 BT8LH-C 0,300 BT9LH-L 0 BT9LH-C 0,300 BW1.5I-D BW2S-D 0 BW3S-D 0 B2M2S-D 0 B3M2S-TL 0 B4M2S-TL 0 3

9 Dome-Top Barb Ty Cable Ties Operating Temperatures, Flammability Ratings,and UL Listings Material Color Part Number Suffix Minimum Application Use Temperature Per EN Nylon 6.6 Natural No Suffix -76 F Nylon Colors Weather Resistant Nylon 6.6 Heat Stabilized Nylon 6.6 Heat Stabilized Nylon 6.6 Flame Retardant Nylon 6.6 Heat Stabilized Weather Resistant Nylon 6.6 Various (See Page 3) -76 F Black 0-76 F Black F Natural F Ivory F (-40 C) Black F Maximum Operating Temperature Per UL 746B 185 F (85 C) 185 F (85 C) 185 F (85 C) 239 F (115 C) 239 F (115 C) 212 F (100 C) 212 F (100 C) Flammability Rating Per UL 94 UL 94V-2 Locking Yes Locking Yes Clamp Yes Clamp Yes Marker/Flag No Marker/Flag Yes Push Mount No Push Mount Yes UL 94V-2 Locking Yes Locking Yes Clamp Yes Clamp Yes Marker/Flag No Marker/Flag Yes Push Mount No Push Mount Yes UL 94V-2 Locking Yes except LH Locking Yes except LH Clamp No Clamp Yes except BC4LH-S25-L0 Marker/Flag No Marker/Flag Yes Push Mount No Push Mount Yes UL 94V-2 Locking Yes Locking Yes Clamp No Clamp Yes Marker/Flag N/A Marker/Flag N/A Push Mount N/A Push Mount N/A UL 94V-2 Locking Yes Locking Yes Clamp N/A Clamp N/A Marker/Flag N/A Marker/Flag N/A Push Mount N/A Push Mount N/A UL 94V-0 Locking No Locking Yes Clamp N/A Clamp N/A Marker/Flag N/A Marker/Flag N/A Push Mount N/A Push Mount N/A UL 94V-2 Locking No Locking Yes Clamp N/A Clamp N/A Marker/Flag N/A Marker/Flag N/A Push Mount N/A Push Mount N/A STH2 PTS Tool Controlled Tension and Cut-off Ergonomic design Tool controlled tension and cut-off High reliability Installer Controlled Tension and Cut-off Economical Manual tension and cut-off For low volume applications Pneumatic, Tool Controlled Tension and Cut-off Ergonomic design, push button operation Tool controlled tension and cut-off High reliability Miniature Intermediate Standard Light-Heavy X X X L X X X GS2B X X X GTH X X GS4H X X GS4EH X Miniature Intermediate Standard Light-Heavy STS2 X X X STH2 X X ST3EH X STHV X Miniature Intermediate Standard Light-Heavy PTS X X X PTH X X PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: PANDUIT LATIN AMERICA Guadalajara, Mexico cs-la@panduit.com Phone: For a copy of Panduit product warranties, log on to PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: For more information Visit us at Contact Customer Service by cs@panduit.com or by phone: and reference CTCB Panduit Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. Product Bulletin Number SA-CTCB43 7/2011

10 Cable Tie Installation Tools Ergonomic Series, Hand Tools GTH PANDUIT leads the industry in providing the most preferred cable tie installation tools for their complete line of PANDUIT cable ties. Choosing the right installation tool increases productivity and promotes worker safety for the lowest installed cost. The and GTH tools are part of the PANDUIT ergonomic series of hand-operated, tool-controlled tension, and cut-off cable tie installation tools. Tool installs subminiature (8 lbs.) through standard (50 lbs.) cross section cable ties GTH Tool installs standard (50 lbs.) through heavy (175 lbs.) cross section cable ties The ergonomic series of tools is excellent for low to medium volume applications (under 50,000 ties/year) in the OEM, MRO, and Construction Markets. Key Features and Benefits Lightweight, ergonomic design speeds installation and reduces operator fatigue and repetitive motion injuries Flush tie cut-off eliminates sharp edges and improves safety by preventing damage to adjacent wire bundles and injury to workers hands and arms Beveled tie entry Allows quick side entry of tie into tool to speed installation Two tension adjustment knobs (fine and coarse) Quick and easy to set, confirm, and maintain desired tension Impact resistant resin housing Lightweight and sturdy Long narrow nose Improves operator visibility and access to confined areas Tension setting label Provides easy-to-read instructions right on tool Soft handle ends Cushion hand during operation Full length ergonomic handle Provides greater operator control NEW! Cushion sleeve Improves comfort and grip, and reduces shock impact Retractable hanger hook Allows tool to be hung-up for easy storage

11 Cable Tie Tools Ergonomic Series, Hand Tools To Change Tension Setting Step 1: Use Coarse Adjustment Knob to select appropriate cross section Step 2: Use Fine Adjustment Knob to set and maintain desired tension ➁ ➀ ➀ Coarse Adjustment Knob ➁ Fine Adjustment Knob Optional Tension Lockout Kit Ordering Information Ergonomic Hand Tools Installs Cable Tie Part Number Cross Sections GTH Subminiature, Miniature, Intermediate, Standard Standard, Heavy-Standard, Light-Heavy, Heavy Description Trigger Handle: Black, Selector Knob: Black, Cushioned Handle: Black. Body: Gray, Weight: 9.8 oz. (278 g) Trigger Handle: Red, Selector Knob: Red, Cushioned Handle: Red. Body: Gray, Weight: 12.0 oz. (340 g) Ctn Hand Tool Accessories Part Number KTL KGTHTL KBLD KGTHBLD KSLV KGTHSLV Used with Tool GTH GTH GTH Description Optional tension locking kit (lockout cap and screw) provides the option to lock the tension at desired setting, which eliminates operator error and ensures consistent results. Optional replacement blade replacement kit (spare blade) allows quick and easy replacement of blade. Can be part of a scheduled maintenance plan, or used when cut-offs are not clean and crisp. Optional cushion sleeve kit (cushion sleeve and lubricant) allows cushion sleeve to be added to existing hand tools for conversion to improved handle design. Ctn WORLDWIDE SUBSIDIARIES AND SALES OFFICES PANDUIT CANADA Markham, Ontario cs-cdn@panduit.com Phone: PANDUIT EUROPE LTD. London, UK cs-emea@panduit.com Phone: PANDUIT SINGAPORE PTE. LTD. Republic of Singapore cs-ap@panduit.com Phone: PANDUIT JAPAN Tokyo, Japan cs-japan@panduit.com Phone: PANDUIT LATIN AMERICA Jalisco, Mexico cs-la@panduit.com Phone: PANDUIT AUSTRALIA PTY. LTD. Victoria, Australia cs-aus@panduit.com Phone: For a copy of PANDUIT product warranties, log on to For more information Visit us at Contact Customer Service by cs@panduit.com or by phone: and reference CTCB PANDUIT Corp. ALL RIGHTS RESERVED. Printed in the U.S.A. Product Bulletin Number WW-CTCB17 7/2006