Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
|
|
- Hollie Clark
- 6 years ago
- Views:
Transcription
1 For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type AC 90 2-Screw Clamp To make a 90 termination of conduit or cable to a knockout or unthreaded slip hole in a dry location box or enclosure. Male hub threads NPS All center stopped Furnished with locknut Available with insulated throat Combination head screws on AC(I)-90 through AC(I)-96 Body and locknut Zinc Plated Steel Cover and screws Type AC-90 Type I, Class I, Style D, Kind C AC-90 and AC-95 listed for use with 3/8 regular wall steel or aluminum flexible conduit. AC-96 listed for use with 3/4 regular wall steel or aluminum flexible conduit and reduced wall steel or aluminum flexible conduit. AC-90, ACI-90, AC-95, and ACI-95 are listed for use with 14-2 AWG through 10-3 AWG steel or aluminum armored cable and AC-95 is listed for use with 8-2 AWG and 8-3 AWG steel or aluminum armored cable. Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C D 3/8* AC-90 ACI /2 AC-95 ACI /4 AC-96 ACI AC /4 AC /2 AC AC /2 AC-250-D AC-300-D /2 AC-350-D AC-400-D AC-90 and ACI-90 are listed for use with 14-2 AWG through 10-3 AWG interlocking steel or aluminum metal-clad cable. PAGE 12
2 For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type DC-5500 Duplex Single Screw, Clamp To make a termination of conduit or cable to a knockout or unthreaded slip hole in a dry location box or enclosure. 3/8* DC Furnished with locknut Male hub NPS Combination head screw Type 1, Class 1, Style B, Kind D Type DC-5500 DC-5500 is listed for use with 14-2 AWG through 12-2 AWG steel or aluminum armored cable. DC-5500 is listed for use with 3/8 steel or aluminum flexible metal conduit. DC-5500 is listed for use with 14-2 AWG (nominal O.D..425 ) through 10-3 AWG (nominal O.D..560 ) aluminum interlocking metal-clad cable and 14-2 AWG (nominal O.D..430 ) through 10-3 AWG (nominal O.D..565 ) steel interlocking metal-clad cable, 14-2 AWG (nominal O.D..380 ) through 10-3 AWG (nominal O.D..565 ) continuous corrugated round aluminum metal clad cable, and 14-2 AWG (nominal.250 x.365 ) through 12-3 (nominal.280 x.525 ) continuous corrugated rectangular aluminum metal-clad cable. Type C Screw Connectors To terminate conduit or cable to a 1/2 knockout in a dry box or enclosure. 3/8* C End stopped Male hub threads NPS Provided with locknut Combination head screw Type 1, Class 1, Style B, Kind D. Type C-510 C-510 is listed for use with 3/8 regular wall steel or aluminum flexible conduit. C-510 is listed for use with 14-2 AWG through 10-2 AWG steel or aluminum armored cable. C-510 is listed for use with 14-2 AWG (nominal O.D..406 through 10-3 AWG (nominal O.D..551 ) aluminum interlocking metal clad cable and 14-2 AWG (nominal O.D..450 ) through 10-3 AWG (nominal O.D..600 ) steel interlocking metal-clad cable, 14-2 AWG (nominal O.D..388 ) through 10-3 AWG (nominal O.D..500 ) continuous corrugated round aluminum metal-clad cable, and 14-2 AWG (nominal.250 x.365 ) through 12-3 (nominal.280 x.490 continuous corrugated rectangular aluminum metal-clad cable. PAGE 13
3 For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type FC Set Screw To terminate regular wall steel or aluminum flexible conduit to a 1/2 knockout in a dry location box or enclosure. 1/2 FC ,. Type 1, Class 1, Style A, Kind E. Type FC-5501 Type GC Screw-in Screw-in type connectors for flexible metal conduit. Federal Spec: W-F-406D, Type 1, Class 1, Style A, Kind A. Insulated Throat Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C 3/8* GC-38 GCI /2 GC-50 GCI /4 GC-75 GCI GC /4 GC /2 GC GC Type GC-38 Cat. No. GC-38 and GC-50 are listed for use with regular wall steel or aluminum flexible conduit. The GC-75 is listed for use with regular wall steel or aluminum and reduced wall steel or aluminum flexible conduit. GC-100 through GC-200 are listed for use with regular wall steel or aluminum flexible conduit. PAGE 14
4 For Armored Cable & Flexible Metal Conduit Type SC Straight Squeeze These squeeze type connectors are used to terminate conduit or cable to a knockout or unthreaded slip hole in a dry location box or enclosure. Male hub threads NPS Available with insulated throat Furnished with locknut Combination head screws on SC-38, SC(I)-50 and SC(I)-75. Type 1, Class 1, Style A, Kind F. Type SC-38 Insulated Throat Inside Diameter Range Trade Size Catalog Catalog Dimensions in Inches (inches) Number Number A B C D (max) D (min) 3/8* SC /2 SC-50 SCI /4 SC-75 SCI SC /4 SC /2 SC SC /2 SC SC-38 and SC-50 listed for use with 3/8 regular wall steel flexible conduit. SC-75 listed for use with 3/4 inch regular wall steel or aluminum flexible conduit and reduced wall steel or aluminum flexible conduit. 3 SC /2 SC SC PAGE 15
5 Zinc Cable & Conduit Couplings For Armored Cable & Flexible Metal Conduit Type EFC Combination Coupling A combination coupling to provide a transition from EMT to flexible metallic conduit. (inches) Number A B 1/2 to 3/8 EFC /2 to 1/2 EFC /4 to 3/4 EFC Type 4, Class 6 EFC-75 and 100 EFC-75 EFC-50 Type EGC Combination Coupling Screw-in/ Compression (inches) Number A B 1/2 to 1/2 EGC /4 to 3/4 EGC A combination coupling to pro vide a transition from EMT to flexible metallic conduit. Type 4, Class 6 Type EGC-50 PAGE 16
6 Zinc Cable Connectors Type TA-38 Saddle Clamp To terminate Armored Cable, Metal-Clad Cable or Nonmetallic Sheathed Cable in a 1/2 knockout in a dry location box or enclosure. 3/8* TA Type 1, Class 1, Style A, Kind D Type TA-38 TA-38 is listed for use with 14-2 AWG (nominal O.D ) to 10-3 AWG (nominal O.D ) steel armored cable (AC); 14-2 AWG (nominal O.D ) to 10-3 AWG (nominal O.D ) aluminum armored cable (AC): to O.D. steel interlocking metal-clad cable (MCI); to O.D. aluminum interlocking metalclad cable (MCI); to O.D. aluminum interlocking metal-clad cable, grounding type (MCI-A); 12-2 AWG to 10-3 AWG nonmetallic sheathed cable. Type C-550 Set-Screw To terminate Armored Cable or Metal-Clad Cable in a 1/2 knockout in a dry location box or enclosure. 3/8* C Type 1, Class 1, Style A, Kind E Type C-550 C-550 is listed for use with 14-2 AWG (nominal O.D ) to 10-2 AWG (nominal O.D ) steel armored cable (AC) and 14-2 AWG (nominal O.D ) to 10-3 AWG (nominal O.D ) steel interlocking metal-clad cable (MCI). Effective July, 2008 Copyright 2008 PAGE 17
7 Flexible Cord Connectors Type SRA Strain Relief Cord Connectors To seal, provide strain relief and to terminate portable or flexible cords to threaded hubs of a water-tight or liquid-tight location box or enclosure. Types S, SO, ST, STO, SJ, SJT, SJTO, and SVO. Steel/Zinc Plated Cable Cable Min. Max. 1/2 SRA /2 SRA /2 SRA /4 SRB /4 SRB /4 SRB /4 SRB SRC SRC SRC SRC Type SRA Type NCG Non-Metallic Strain Relief Cord Connectors To seal, provide strain relief, and to terminate flexible or portable cords to slip holes, knockout holes, or threaded hubs of a water-tight or liquid-tight location box or enclosure. Acme threads on nut end of body prevent skipping, speed installation. All nylon construction with the Buna-N gland resists salt water, weak acids, gasoline, alcohol, oil, grease, and common solvents. Recommend using the smallest maximum diameter fitting that will fit your application. Nylon PAGE 18 Type NCG Cable Cable D E Min. Max. 3/8* NCG /8* NCG /2 NCG /4 NCG NCG
NEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit
For Flexible Metal Conduit SC: Straight Squeeze Type Connector These squeeze type connectors are used to terminate flexible metal conduit to a 1/2 knockout in a dry location box or enclosure. 1/2" and
More informationtings fi t fl ex/mc/ac
22 flex/mc/ac fittings Nothing can be more frustrating than losing valuable time due to low quality fittings. Madison s Flex/AC/ MC fittings come through for you time after time. Giving you affordability
More informationRACO Commercial Fittings
RACO Commercial Fittings B2 GENERAL INFORMATION - STANDARDS, 1999 NATIONAL ELECTRICAL CODE General Information When you need to couple, connect, fasten, or ground conduit or cables, RACO fittings are your
More informationConduit End Bells...EA1 Hex Reducing Bushings...EA2 Conduit Hubs...EA3-EA4. Split Couplings...EA5 Three Piece Couplings...EA6 Conduit Nipples...
SECTION E INDEX Product Description Page Number Conduit End Bells.......................................EA Hex Reducing Bushings..................................EA2 Conduit Hubs......................................EA-EA4
More informationGround Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
More informationRACO Commercial Fittings
06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B1 RACO Commercial Fittings 06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B2 B2 dbkbo^i=fkcloj^qflk=j=pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab déåéê~ä=fåñçêã~íáçå tüéå=óçì=åééç=íç=åçìéäéi=åçååéåíi
More informationMale Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique
More information4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
More informationBELL. RACO, TayMac and BELL offer a full line of electrical products that are ideally suited to help you complete your next solar project
SOLAR RACO, TayMac and BELL offer a full line of electrical products that are ideally suited to help you complete your next solar project Commercial, Industrial and Residential Electrical Products RACO
More informationSetting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
More informationSpecialist liquid tight products LTPSS system stainless steel pvc coated liquid tight LTPPU system galvanised steel, polyurethane coated liquid tight
METALLIC & LTPSS Construction: Stainless steel (3), helically wound, flexible conduit with oil resistant and high temperature pvc smooth cover. Colour black. Typical Applications: Food processing machinery
More informationLiquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM )
Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM ) No. Trade Dimensions (mm) Size I.D. A B C Threads YCM-03 3/8 11.2 28.3 44.6 13.2 PT 1/2 YCM-04 1/2 14.8
More informationDelikon Stainless Steel Liquidtight Connectors offer corrosion resistance and the strength of stainless steel for the highest levels of endurance.
Corrosion Resistant liquid tight conduit fittings for use with flexible liquid tight metallic conduits, flexible liquid tight non metallic or PVC coated flexible metal conduit. * Liquidtight, Raintight,
More informationPosiflow Proportional Solenoid Valves % ^ ) 2/2. Brass or Stainless Steel Bodies 1/8" to 1/2" NPT. Proportional Valves. Features.
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/8" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Control achieved by applying straight voltage between 0 and 24 VDC
More informationMast and Antennas for Field Day & Emergencies
Mast and Antennas for Field Day & Emergencies John A. Allocca, WB2LUA, July 2005 This is a 27 feet 1.5 diameter portable guyed mast with a 28 feet diameter footprint. It breaks down into four 6 feet sections
More information05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes 05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A76 A76 pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab Δ déåéê~ä=^ééäáå~íáçåë o^`l=ñäççê=äçñéë=~êé=áçé~ääó=ëìáíéç
More informationPIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
More informationCabtite Cable entry system. Cable entries and Cabtite
Cabtite Cable entry system Do you really need a plug-in connector on the outside of your switchgear cabinet? Or do you simply just want to make the right connections? Now you can save space, time and money
More informationIberville. Commercial Grade Fittings EMT CI5410 / CI5432 CI5410IT / CI5432IT CI5404 / CI5408 CI5404IT / CI5408IT CI5004 (-IT) / CI5008 (-IT)
ommercial Grade Fittings Set-Screw Fittings I5404 / I5408 I5404IT / I5408IT I5004 (-IT) / I5008 (-IT) I5410 / I5432 I5410IT / I5432IT I5010 (-IT) / I5016 (-IT) Regular Insulated Set-Screw Fittings (Steel)
More informationGLOSSARY OF ELECTRICAL INDUSTRY TERMS
A ADD-A-DEPTH RING a means of extending the walls of a device box to the wall surface, providing a barrier between a wiring device and the surrounding wall material. AIR PLENUM a compartment or chamber
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationRound/Octagon Boxes and Accessories
Round/Octagon Boxes and Accessories 4" Round Boxes DEPTH BOTTOM CAT. NO. (IN.) CAPACITY DESCRIPTION CONDUIT CTN. 56111 1 2 6.0 Steel outlet box 4 1 2 50 56111-CFB* 1 2 6.0 Ceiling fan box with plastic
More informationJake Leahy s Electrical Code Connection. A look at Grounding and Bonding of Electrical Services Article Florida Building Code 5 th Edition
Jake Leahy s Electrical Code Connection A look at Grounding and Bonding of Electrical Services Article 250 2014 Florida Building Code 5 th Edition Wiring Integrity. Completed wiring installations shall
More informationInternational Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationTechline Flat Cross Splice. Techline Yoke Clamps* Techline Gang Clamps* TECHLINE. *Yoke Clamps Are Available To Fit Any Width.
Techline Flat Cross Splice SIZE HD GALVANIZED ALUMINUM 304 SS 2Ó TLXS-2 HDG TLXS-2 AL TLXS-2 SS 3Ó TLXS-3 HDG TLXS-3 AL TLXS-3-SS 4Ó TLXS-4 HDG TLXS-4 AL TLXS-4 SS 6Ó TLXS-6-HDG TLXS-6 AL TLXS-6 SS TECHLINE
More informationDeviceNet Series. Cables Cordset Accessories Receptacles Receptacle Accessories Junction Blocks
Series Cables... - Cordset Accessories... - Receptacles... 6-9 Receptacle Accessories. 0- Junction Blocks... -6 L- Mencom Corporation MencomConnectors.com TEL: 770--8 Ph: 800-966- www.mencom.com Series
More informationPrecision Thermistor Sensors
Precision Thermistor Sensors For Laboratory Applications ON-400 Series U For Use in Laboratory or Other High-Accuracy Applications U Rugged Construction Can Be Used for Short Term Water and Soil Readings
More informationGlenair s Series 80 ASAP Cordsets for High-Speed Ethernet, USB and Firewire Applications
General Information Compact Weight-Saving Design with size #23 Contacts SB 2.0, 100BASE-T, 1000BASE-T, IEEE 1394 Environmentally Protected, Robust Construction Aerospace-Grade Cable Meets FAA FAR 25 Flammability
More informationELECTRICAL PANEL SYSTEM
ELECTRICAL PANEL SYSTEM Version 2.3 23-Jul-2016 Copyright 2016 Rancho La Paloma Ministry Center / ClubRust ClubRust and Rancho La Paloma Ministry Center is providing this information and services on its
More informationFlexicon Flexible Conduit, Glands and Clamps
Flexicon Flexible Conduit, Glands and Clamps by Unipart Rail Flexible conduit designed and accepted for use in Class II equipment and in Flood Prone areas Network Rail Approved SERVING THE WORLD S RAILWAYS
More informationA. Product Description: Stranded conductor insulated wire.
SECTION 16120CPPR CONDUCTORS AND CABLE PART 1 - GENERAL 1.1 SYSTEM DESCRIPTION A. Product Requirements: Provide products as follows: 1. All building wire shall be stranded copper (no aluminum wire). 2.
More informationBeam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
More informationP3-19 Series Connectors For Entertainment Lighting
Introduction P3-19 series connectors have been developed to offer the highest levels of reliability and safety. The super robust construction ensures continual and reliable operation. The rugged fully
More informationE.M.T. Set-Screw Connectors. Technical Specifications
Set-Screw onnectors Regular Insulated I5404 (-IT) / I5408 (-IT) Steel Locknut I5004 (-IT) / I5008 (-IT) I5020 (-IT) / I5032 (-IT) I5410 (-IT) / I5432 (-IT) Steel Locknut I5010 (-IT) / I5016 (-IT) I5054
More informationELECTRIC GROUNDING AND WIRING REQUIREMENTS BOOTHS-METAL
BELL SYSTEM PRACTICES Plant Series SECTION 508-100-100 Issue 3, October 1970 AT&TCo Standard ELECTRIC GROUNDING AND WIRING REQUIREMENTS BOOTHS-METAL I. GENERAL 1.01 This section is reissued to: Revise
More informationSteel City Comparison & Strategy. vs. T&B Liquidtight Fittings. Andrea Briggs. Associate Product Manager - Conduit & Fittings FOR INTERNAL USE ONLY
Comparison & Strategy Andrea Briggs Associate Product Manager - Conduit & Fittings Liquidtight Fitting Brand Strategy Component Comparisons Summary Liquidtight Fitting Brand Strategy Steel City Liquidtight
More informationEuroMag Series PCB Mount Terminal Blocks. EM3123 Series Euro-Mag Terminal Blocks 3.50 Centers; Modular. Part Numbering System
EuroMag PCB Mount Terminal Blocks EM.0 Centers; Modular Rating: A, 00V Center Spacing: 0. (.0mm) Wire Range: #1- AWG Housing Material: Black Polyamide Type /, V0 Screw Size: M.0 Chromate Steel Operating
More informationcontent Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
More informationINTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
More informationCONTINUING EDUC ATION
3 CONTINUING EDUC ATION FOR WISCONSIN ELECTRICIANS 2017 NEC Article 250 2 Hours WISCONSIN CONTRACTORS INSTITUTE N16 W23217 Stone Ridge Drive Suite 290 Waukesha, WI 53188 262-409-4282 www.wcitraining.com
More informationSTANDARD RTD's INDEX
STANDARD RTD's INDEX PAGE General Information... R2 Temperature/Resistance Table... R6 Part Numbering Examples... R10 High Temperature MgO Elements (RA)... R11 Leadwire Style RTD's (RB)... R12 Leadwire
More informationFloor Boxes. Flush Service Floor Boxes
60W Series Floor Boxes 62W 61W For Wood Subfloors! Steel City 60W Series Floor Boxes provide single and multi-gang solutions for wood subfloor applications. NEW! Three-gang configuration for high-capacity,
More informationFord Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
More informationArticle 250 Grounding & Bonding
Article 250 Grounding & Bonding AMERICAN ELECTRICAL INSTITUTE N16 W23217 Stone Ridge Dr. Waukesha, WI 53188 855-780-5046 www.aeitraining.com DISCLAIMER NOTE: This course is APPROVED for continuing education
More informationFloor Boxes. Concealed Service Floor Boxes. Engineering Data 663 Series. Faces Plates for 663 Floor Box. 663 Series Floor Box
Concealed Service Floor Boxes 663 Series Floor Box 663-SC Multiple service floor box that delivers power, communications and data from standard conduit with no exposed service fitting Result: Open office
More informationParts Catalog. S-Series Slicer Smart Manual SG13. Model:
, 07 99507 ECN 065 Parts Catalog S-Series Slicer Smart Manual Model: SG SG 0/0/07 Rev. G IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE
More informationAssembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
More informationcommercial and industrial fittings: cast DEVICE BOXES Applications Illustrated Features
UNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Construction. Furnished with Internal Ground Screw. Applications Accommodate wiring devices such as switches and receptacles.
More informationClamp Pair. Bore Diameter (mm) Clamp Material PP = Polypropylene PA = Polyamide PE = Polyethylene AL = Aluminum
DIN 0 CLAMPS Clamp Pairs HRL = Standard Duty (Ribbed Profile) HRGL = Standard Duty (Smooth Profile) HRS = Heavy Duty (Ribbed Profile) HRGS = Heavy Duty (Smooth Profile) Clamp Pair ore Diameter (mm) Clamp
More informationHolemaking. Contents MADE FOR THE TRADE!
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationMECKLENBURG COUNTY. Land Use and Environmental Service Agency Code Enforcement 9/8/10 ELECTRICAL CONSISTENCY MEETING. Code Consistency Questions
conduit? 9/8/10 ELECTRICAL CONSISTENCY MEETING Code Consistency Questions 1. Can branch circuits of different services be installed in the same Yes, see 300.3(C)(1) for conductors of different systems
More informationM2 Antenna Systems, Inc. Model No: 7&10-30LP8
M2 Antenna Systems, Inc. Model No: 7&10-30LP8 2:1 100KHz BANDWIDTH@ 1.8:1 VSWR 1.5:1 6.9 7.0 7.1 10 FREQUENCY (MHZ) 20 SPECIFICATIONS: Model...7&10-30LP8 Skip log Frequency Range...10-30 MHz Continuous
More informationC-L-X ARMOR REMOVAL PROCEDURES
C-L-X ARMOR REMOVAL PROCEDURES USING THE KETT MODEL #KS-226 CABLE SAW The procedure listed below details Okonite s recommended method for removing C-L-X armor from large and small diameter cables. These
More informationOutline. Grounding Washer, Electrical Equipment Bond (WEEB) Acme Cable Clips Acme Conduit Entry (ACE) Questions
www.we-llc.com Outline Grounding Washer, Electrical Equipment Bond (WEEB) Acme Cable Clips Acme Conduit Entry (ACE) Questions Bonding & Grounding Grounding Terms Equipment Grounding: The National Electrical
More informationConcealed Thru-Roof Assemblies
Concealed Thru-Roof Assemblies IPC s concealed thru-roof assembly is ideal for new constructions or applications where installation will be concealed. The 240 assembly includes everything necessary for
More informationSW 16mm. SW 15mm. SW 19mm
M B-Coding Automation Technology 7 series Screw locking acc. to DIN EN 6076--0 Degree of protection IP67 Moulded versions Degree of protection IP68 Easy assembly Excellent EMC shielding Versions with shielding
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More informationB-Too Drilling and Tapping Machine Instruction and Maintenance Manual
B-Too Drilling and Tapping Machine Instruction and Maintenance Manual Thank you for your purchase of the B-Too Drilling and Tapping Machine. Please read and understand this short operation manual. Our
More informationMIST SANITARY SERIES TM
MIST SANITARY SERIES TM Microprocessor Integrated Sensor Transmitter Temperature 3A Approval Temperature sensor with 4 to 20 ma output Hermetically sealed transmitter within the sensor Field reprogrammable
More informationAmphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
More informationThe MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
More informationAmerican Electrical Institute
American Electrical Institute Oregon Electricians Continuing Education Grounding & Bonding (Article 250) 4 Hours American Electrical Institute PO Box 31131 Spokane, WA 99223 www.aeitraining.com Article
More informationHolemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
More informationGeneral Installation Instructions
General Installation Instructions WARNING To reduce the risk of death, injury or property damage from fire, electric shock, cuts, abrasions, falling parts and other hazards: Service of the equipment must
More informationB32157 UNDERCARRIAGE KIT. Jeep Cherokee Jeep Wagoneer Jeep Comanche Parts List and Installation Instructions CAUTION
October 15, 2007 Lit. No. B64110, Rev. 01 B32157 UNDERCARRIAGE KIT Jeep Cherokee 1984-01 Jeep Wagoneer 1984-93 Jeep Comanche 1986-92 Parts List and Installation Instructions Read this document before installing
More informationM2 Antenna Systems, Inc. Model No: 20M5LD
M2 Antenna Systems, Inc. Model No: 20M5LD SPECIFICATIONS: Model... 20M5LD Frequency Range... 14.0 14.350 MHz *Gain (Full Band)... 10.2 dbi Typical Front to back... 23 db Typical Beamwidth... E=50 / H=66
More informationCONDUIT, FITTINGS & SADDLES
CONDUIT, FITTINGS & SADDLES GC Conduit & Fittings...244 SS Fittings... 251 150 Series Conduit & Fittings...252 Galvanised Flexible Conduit & Fittings...253 Galvanised & Stainless Steel Saddles... 257 P:
More informationProfibus-PA. Profibus-PA. Process Automation. Over-Molded Cables Receptacles Field Wireables Accessories. UL File #: E
Profibus-PA Process Automation Over-Molded Cables Receptacles Field Wireables Accessories U File #: E9 PROFIBUS (Process Field Bus) is a standard for field bus communication in automation technology. The
More informationSAC-5P- 1,5-PUR/M12FS SH
Extract from the online catalog SAC-5P- 1,5-PUR/M12FS SH Order No.: 1682935 Sensor/Actuator cable, 5-position, PUR, halogen-free, Black-gray RAL 7021, shielded, Free conductor end M12, on Socket, straight
More informationDETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR
INCH-POUND MS21344A 4 October 2016 SUPERSEDING MS21344 17 August 1971 DETAIL SPECIFICATION SHEET FITTINGS - INSTALLATION OF FLARED TUBE, STRAIGHT, THREADED CONNECTORS, DESIGN STANDARD FOR This specification
More informationAvailable in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
More informationHose Accessories. "Air King" 4 - Lug Quick-Acting Couplings. Hose End. Female N.P.T. End
"Air King" 4 - Lug Quick-Acting 1¼" 1½" AM16 AM AM6 AB16~ AB~ AB6 End Rubber Washers for 4-Lug AWR14 Fits all sizes 1¼" 1½" AM18 AM3 AM8 AB18~ AB3 AB8 Rated to 1 PSI Female N.P.T. End "Boss" clamps recommended
More informationCable Hanging Instruction Manual
Tri-States Grain Conditioning, Inc. Cable Hanging Instruction Manual There are several types of grain storage tanks and bins. Parts of these instructions may be modified to fit the circumstances. Care
More informationEP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE
EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:
More informationKerkau Manufacturing. B16.5 Flange Book
Kerkau Manufacturing B16.5 Flange Book TABLE OF CONTENTS Revision 1 Title Page Table of Contents Tolerance Page Permissible Imperfections Dimensions of Flange Facings (all pressure rating classes) Dimensions
More informationFiber Splice Box (FSB-D) Installation Instructions
Fiber Splice Box (FSB-D) Installation Instructions Table of Contents General Product Information... 1.0 Safety Precautions... 2.0 Tools Required... 3.0 Package Contents... 4.0 Installing the Product Unpacking...
More informationWrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
More informationEN2 SERIES SEALED CONNECTORS
FEATURES & BENEFITS Sealed to IP68, NEMA 250 (6P) (when mated) Available in standard or winged coupling ring Patented grommet and o-ring free design Solder/crimp and PC contact options APPLICATIONS Any
More informationTRANSMITTAL LETTER. As Builts Change Order Contract Copy of Letter Insurance. For approval Approved as submitted Resubmit copies for approval
Redwood City Electric, Inc. TRANSMITTAL LETTER To: Transworld Construction, Inc. 1178 Folsom Street San Francisco, CA 94103 Date: 05/31/12 Job #: 9340 Regarding: SFO DATA CENTER Attn: Rob Acero We are
More informationSB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
More informationThe V2100 Series Steel Raceway provides wiring
V2100 Steel Raceway Two-Piece Surface Raceway The V2100 Series Steel Raceway provides wiring capacities for small to medium size installations. Power or Data/Communication Devices can be wired into the
More informationNEW. Automation Technology 768 series
Automation Technology 78 series Screw locking acc. to DIN EN 07--0 Degree of protection IP7 Moulded versions Easy Assembly Excellent EMC shielding (versions with shielding rings 0 ) Versions with shielding
More informationM2 Antenna Systems, Inc. Model No: 10-30LP8
M2 Antenna Systems, Inc. Model No: 10-30LP8 SPECIFICATIONS: Model... 10-30LP8 Frequency Range... 10-30 MHz Continuous *Gain free space / 65... 5.2 dbi / 10.5 dbi 10-30 Front to back... 15 db 10-30 MHz
More information2. CONDUCTORS. 2.1 Strand Types. 2.2 Coatings Tensile Strength of Copper Wire Copper Strand Properties. 2.5 Aluminum Strand Properties
2. CONDUCTORS 2.1 Strand Types 2.1.1 Concentric Strand 7 2.1.2 Bunch Strand 7 2.1.3 Rope Strand 8 2.1.4 Sector Conductor 8 2.1.5 Segmental Conductor 8 2.1.6 Annular Conductor 8 2.1.7 Compact Strand 8 2.1.8
More informationNELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun Imperial Dimension Chucks
Type 1 4 #2 Morse Taper Mounting NELSON STUD WELDING ACCESSORY SPECIFICATION: Stud Weld Gun s Below is a list of standard imperial chucks for use in welding Nelson studs. The chucks are listed with both
More informationSpring Steel Fasteners
Cable Support Supports up to 4 runs of MC and AC cable and up to 6 runs of nonmetallic sheathed cable Installs with nails or staple or sheet metal screws Complies with CEC article 12-516 for all wood and
More informationAdhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
More informationSteel Raceways BASE SECTIONS. SnapMark SMS3000 Series FITTINGS, CONNECTORS & BOXES RIGID COUPLING COUPLING BLANK END FITTING ENTRANCE END
22 BASE SECTIONS SMS3000 GRAY BASE - 10FT. (3m).050 galvanized steel. Knockout pattern (.5 [12mm] &.75 [19mm]) in back of raceway, 11 (275 mm) on center. Internal area: 4.90 2 (124mm 2 ) (Order SMS3003
More informationPF/PFQ. High Amperage plug and receptacle. Main Advantages
High Amperage plug and receptacle Main Advantages u u u Durable in harsh environments Safety features provide maximum protection Easy plug insertion and removal Watch the PF video and other product videos
More informationN Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC. Cable Attachment Method (Shield/Contact)
N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2 inch Flexible, PE-1/2FAC TECHNICAL DATA SHEET N Male Right Angle Connector Clamp/Solder Attachment For 1/2 inch Annular, 1/2
More informationWaterpipe Ground Clamps. 1/2 in., 3/4 in., 1 or rebar /4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 AWG
Waterpipe Ground Ground Wire Size Water Pipe Size 2-T 1/2 in., 3/4 in., 1 or rebar 4-10 3-T 1-1/4 in., 1-1/2 in. or 2 in. 4 #6, #4, #2 WG 2-1/2 in., 3 in. or 3-1/2 in. 5-T 4 in., 4-1/2 in. or 5 in. 6 6
More information2/15/2015. Current will always try to return to its source. In order for there to be current, there must be a complete circuit
Current will always try to return to its source In order for there to be current, there must be a complete circuit Current will take as many paths or circuits available to it to return to the source The
More informationPrecision Junction Boxes
Precision Junction Boxes Accuracy and Stability All components are designed for high accuracy and long term stability. Precision SMT resistors and gold plated switches guarantee trouble free operation.
More informationST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL
ST90 SADDLE STITCHER TP10564 MISSING STITCH INSTALLATION MANUAL OVERVIEW MISSING STITCH INSTALLATION GUIDE The Missing Stitch option is an add-on to the ST-90 saddle stitcher. This unit mounts to the stitch
More informationAssembly Instructions: Bencher Skylark
Assembly Instructions: Bencher Skylark Tools Required: Pop Rivet Tool Tape Measure Hex Wrenches Screwdriver Several Disposable Rags Two Saw Horses Several boxes or bowls to hold fasteners and small parts
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationM2 Antenna Systems, Inc. Model No: 10-30LP8
M2 Antenna Systems, Inc. Model No: 10-30LP8 VSWR 2:1 TYPICAL VSWR @ 70 FT. 2:1 1.5:1 1.5:1 1.2:1 1.2:1 10 14 MHz 11 12 13 17 15 16 18 19 20 21 22 23 24 25 26 27 28 29 30 SPECIFICATIONS: Model...10-30LP8
More informationCat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
More information