MIST SANITARY SERIES TM

Transcription

1 MIST SANITARY SERIES TM Microprocessor Integrated Sensor Transmitter Temperature 3A Approval Temperature sensor with 4 to 20 ma output Hermetically sealed transmitter within the sensor Field reprogrammable with PC interface module and software Standard Hygienic Clamp Union Style Connection ( TriClamp ) Custom and OEM Designs are Our Specialty

2 MIST MS01 Mini Sanitary Temperature Sensor w/extension Cable Instrument Connection Smooth shank ( N) 0.38 dia. D Hygenic clamp ( TriClamp ) 0.63 dia. 3.0 E 2.6 C L Custom Builder MODEL MS Patent No.: US 7,223,014 Canadian Patent Pending 11 Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX4 S BOX5 BOX6 N Probe Diameter D B 1/ (4.0 mm) C 3/ 16 D 1/ 4 Other diameters available. Consult factory. Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. BOX7 N SR Probe Length L In 0.1 inch increments Ex.: 012= 1.2 long Extension Length C In 0.1 increments ( 1.0 Std. ) Ex.: N10 = 1.0 long Instrument Connection None, smooth shank Strain Relief Other connections available. Consult factory. BOX8 T12 Hygienic clamp union, 1/2 T34 Hygienic clamp union, 3/4 BOX9 PV TF TA TP 0 1 SF F1 F4 Extension Cable Type PVC insulation, 90 o C ( 195 o F ) max. Teflon insulation, Teflon with SS armor, Teflon with SS armor and polyolefin shrink, 90 o C ( 195 o F ) max. TT Teflon with SS armor and Teflon shrink, Note : 1. Leads E length 12 and less are single conductor Teflon insulation, 22 AWG Extension Cable Length E In inches Ex.: 060 = 60 long Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A2.0

3 MIST MS03 Mini Sanitary Temperature Sensor w/extension Cable & Conduit Fitting Hygenic clamp ( TriClamp ) D 0.38 dia dia. Instrument Connection 1/2 NPT fitting ( EN) L C 2.6 E 3.0 Custom Builder MODEL MS Patent No.: US 7,223,014 Canadian Patent Pending 11 Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX4 S BOX5 BOX6 N Probe Diameter D B 1/ (4.0 mm) C 3/ 16 D 1/ 4 Other diameters available. Consult factory. Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. BOX7 EN EE Probe Length L In 0.1 inch increments Ex.: 012= 1.2 long Extension Length C In 0.1 increments (1.0 Std. ) Ex.: N10= 1.0 long Instrument Connection 1/2 NPT male 1/2 NPS male BOX8 T12 Hygienic clamp union, 1/2 T34 Hygienic clamp union, 3/4 BOX9 PV TF TA TP 0 1 SF F1 F4 Extension Cable Type PVC insulation, 90 o C ( 195 o F ) max. Teflon insulation, Teflon with SS armor, Teflon with SS armor and polyolefin shrink, 90 o C ( 195 o F ) max. TT Teflon with SS armor and Teflon shrink, Note : 1. Leads E length 12 and less are single conductor Teflon insulation, 22 AWG Extension Cable Length E In inches Ex.: 060 = 60 long Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A3.0

4 MIST MS05 Mini Sanitary Temperature Sensor w/m12 MicroConnector M12 MicroFemale Connector Extension cable molded PVC IP68/NEMA 6P, 40 ºC to 90 ºC 0.63 dia. Hygenic clamp ( TriClamp ) 0.38 dia. D 3.0 E 2.6 C L Custom Builder Patent No.: US 7,223,014 Canadian Patent Pending MODEL MS Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX4 S BOX5 BOX6 N Probe Diameter D B 1/ (4.0 mm) C 3/ 16 D 1/ 4 Other diameters available. Consult factory. Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. Probe Length L In 0.1 inch increments Ex.: 012= 1.2 long Extension Length C In 0.1 increments ( 1.0 Std. ) Ex.: N10 = 1.0 long BOX8 T12 Hygienic clamp union, 1/2 T34 Hygienic clamp union, 3/4 BOX9 MC 0 N A2 A5 B2 B5 1 SF F1 F4 Connector Type M12 MicroMale Connector Other types of connectors availabe. Consult factory. Extension Cable E None Straight, 2 meters Straight, 5 meters Right angle, 2 meters Right angle, 5 meters Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A4.0

5 MIST MS22 Sanitary Temperature Sensor w/extension Cable Applications and Uses MIST MS22 assemblies are an excellent choice where extreme operating conditions prevail in wash down situations and very wet environments. External cables will withstand washdowns and optional stainless steel armor or overbraid prevents abrasion wear. These assemblies come standard with a 1/4 diameter probe. Larger diameters or reduced tip probes are also available. Stock Items Intempco stocks the most commonly used MIST MS22 assemblies with the following features : Factory calibrated 420 ma output to a customer specified temperature range Teflon insulation 4conductor AWG 22 cable with SS Armor, 6 feet long (3M) Operating temperature range of 50 to 200 Deg. C Builtin, fully programmable, microprocessor based transmitter Order MIST PKIT to recalibrate to other temperature ranges 1.5 and 2 hygienic clamp union sizes available ( TriClamp ) Immersion lengths available are 2.5 and 4 and 6 1/4 probe diameter, stainless steel 316 To order a MIST MS22 with 2 hygienic clamp union, a 4 probe with a range of 25 to 125 o C, specify the inventory number and temperature range, ex.: MS22LT20040 (25/125) o C on your order. To field calibrate the MIST MS22, order the Intempco MIST PKIT which includes the module and software. Ordering Information (Order stock items using Intempco inventory number) Inventory Number (Teflon Jacket) Inventory Number ( Armored Jacket) Probe Length L Hygienic Clamp Union Size MS22LT15025TF MS22LT15025TA MS22LT15040TF MS22LT15040TA MS22LT15060TF MS22LT15060TA MS22LT20025TF MS22LT20025TA MS22LT20040TF MS22LT20040TA MS22LT20060TF MS22LT20060TA A5.0

6 MIST MS22 Sanitary Temperature Sensor w/extension Cable C 1.5 Std. Instrument Connection Strain Relief ( SR) 2.5 max. Note : To order the MIST MS22 with a 90 o bend, add suffix B after the model number. Ex.: MS22B Hygenic clamp ( TriClamp ) 0.63 dia. D Reduced Tip L C 1.5 Std. 2.6 E 3.0 Custom Builder MODEL MS22 _ Patent No.: US 7,223,014 Canadian Patent Pending 11 A6.0 Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX5 Probe Diameter D D 1/4 F 3/8 H 1/2 Sheath O.D. Tip O.D. DB 1/4 1/8 FC 3/8 3/16 HC 1/2 3/16 HD 1/2 1/4 JD 5/8 1/4 Other diameters available. Consult factory. BOX4 S BOX6 N Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. BOX7 N SR EN EE Probe Length L In 0.1 inch increments Ex.: 065= 6.5 long Extension Length C In 0.1 increments ( 1.5 Std. ) Ex.: N15= 1.5 long Instrument Connection None, smooth shank Strain Relief 1/2 NPT male 1/2 NPS male Other connections available. Consult factory. BOX8 T10 Hygienic clamp union, 1 T15 Hygienic clamp union, 1.5 T20 Hygienic clamp union, 2 T25 Hygienic clamp union, 2.5 T30 Hygienic clamp union, 3 Other fittings available. See page 11 & consult factory. BOX9 PV TF TA TP 0 1 SF F1 F4 Extension Cable Type PVC insulation, 90 o C ( 195 o F ) max. Teflon insulation, Teflon with SS armor, Teflon with SS armor and polyolefin shrink, 90 o C ( 195 o F ) max. TT Teflon with SS armor and Teflon shrink, Note : 1. Leads E length 12 and less are single conductor Teflon insulation, 22 AWG Extension Cable Length E In inches Ex.: 060 = 60 long Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP

7 MIST MS24 Sanitary Temperature Sensor w/bevel Fitting Instrument Connection Smooth shank ( N) Bevel fitting D Reduced Tip 0.63 dia. 3.0 E 2.6 C 1.5 Std. L Patent No.: US 7,223,014 Canadian Patent Pending Custom Builder MODEL MS24 _ Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX5 Probe Diameter D D 1/4 F 3/8 H 1/2 Sheath O.D. Tip O.D. DB 1/4 1/8 FC 3/8 3/16 HC 1/2 3/16 HD 1/2 1/4 JD 5/8 1/4 Other diameters available. Consult factory. BOX4 S BOX6 N Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. BOX7 N SR EN EE Probe Length L In 0.1 inch increments Ex.: 065= 6.5 long Extension Length C In 0.1 increments ( 1.5 Std. ) Ex.: N15= 1.5 long Instrument Connection None, smooth shank Strain Relief 1/2 NPT male 1/2 NPS male Other connections available. Consult factory. BOX8 A** B** C** D** E** F** G** CherryBurrell ( 16A1141 ), male std. CherryBurrell ( 16A1141 ), female Bevel Seat (16A) with 13H nut Bevel Seat ( 16A ) without nut Bevel Seat ( 16A ) female John Perry ( JP16A ) with 13H nut John Perry ( JP16A ) without nut ** 10=1 20=2 30=3 15= = 2.5 Other fittings available. See page 11 & consult factory. BOX9 PV TF TA TP 0 1 SF F1 F4 Extension Cable Type PVC insulation, 90 o C ( 195 o F ) max. Teflon insulation, Teflon with SS armor, Teflon with SS armor and polyolefin shrink, 90 o C ( 195 o F ) max. TT Teflon with SS armor and Teflon shrink, Note : 1. Leads E length 12 and less are single conductor Teflon insulation, 22 AWG Extension Cable Length E In inches Ex.: 060 = 60 long Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A7.0

8 MIST MS25 Sanitary Temperature Sensor w/m12 MicroConnector C 1.5 Std. 2.5 max. Note : To order the MIST M25S with a 90 o bend, add suffix B after the model number. Ex.: MS25B Reduced Tip D Hygenic clamp ( TriClamp ) 0.63 dia. M12 MicroFemale Connector Extension cable molded PVC IP68/NEMA 6P, 40 ºC to 90 ºC L C 1.5 Std. 2.6 E 3.0 Patent No.: US 7,223,014 Canadian Patent Pending Custom Builder MODEL MS25 _ Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 BOX5 Probe Diameter D D 1/4 F 3/8 H 1/2 Sheath O.D. Tip O.D. DB 1/4 1/8 FC 3/8 3/16 HC 1/2 3/16 HD 1/2 1/4 JD 5/8 1/4 Other diameters available. Consult factory. BOX4 S BOX6 N Probe Material Stainless steel 316 / 316L Other materials available. Consult factory. Probe Length L In 0.1 inch increments Ex.: 065= 6.5 long Extension Length C In 0.1 increments ( 1.5 Std. ) Ex.: N15= 1.5 long BOX8 0 N A2 A5 B2 B5 T10 Hygienic clamp union, 1 T15 Hygienic clamp union, 1.5 T20 Hygienic clamp union, 2 T25 Hygienic clamp union, 2.5 T30 Hygienic clamp union, 3 Other fittings available. See page 11 & consult factory. BOX9 MC 1 SF F1 F4 Connector Type M12 MicroMale Connector Other types of connectors availabe. Consult factory. Extension Cable E None Straight, 2 meters Straight, 5 meters Right angle, 2 meters Right angle, 5 meters Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A8.0

9 MIST MS80 Sanitary Temperature Sensor w/connection Head Applications and Uses MIST MS80 assemblies are an excellent choice where extreme operating conditions prevail in wash down situations and very wet environments. Moisture and liquids accidentally entering the enclosure no longer damage the electronics, simply clean and use again. These assemblies come standard with a 1/4 diameter probe. Larger diameters or reduced tip probes also available. Stock Items Intempco stocks the most commonly used MIST MS80 assemblies with the following features: Factory calibrated 420 ma output to a customer specified temperature range FDA approved white polypropelene enclosures with 3/4 NPT electrical conduit connection. Operating temperature range of 50 to 200 Deg C Builtin, fully programmable, microprocessor based transmitter Order MIST PKIT to recalibrate to other temperature ranges 1.5 and 2 Triclamp sizes available Immersion lengths available are 2.5 and 4 and 6 with 1/4 probe diameters All stainless steel 316 wetted surfaces To order a MIST MS80 with 2 hygienic clamp union, a 4 probe with a range of 25 to 125 o C, specify the inventory number and temperature range, ex. MS80LT20040 (25/125) o C on your order. To field calibrate the MIST MS80, order the Intempco MISTPKIT which includes the module and software. Ordering Information (Order stock items using Intempco inventory number) Catalog Number Inventory Number Probe Length L Hygienic Clamp Union Size MS80LLPDS025N25EET15PO3SF MS80LT15025PO MS80LLPDS040N25EET15PO3SF MS80LT15040PO MS80LLPDS060N25EET15PO3SF MS80LT15060PO MS80LLPDS025N25EET20PO3SF MS80LT20025PO MS80LLPDS040N25EET20PO3SF MS80LT20040PO MS80LLPDS060N25EET20PO3SF MS80LT20060PO A9.0

10 MIST MS80 Sanitary Temperature Sensor w/connection Head PO3 head Instrument connection Hygienic clamp union connection D Reduced Tip C 2.5 Std. L Custom Builder Patent No.: US 7,223,014 B2 Canadian Patent Pending MODEL MS80 _ 0 Calibrated Temperature Range 05 0 o C to 50 o C ( 32 / 122 o F) 10 0 o C to 100 o C ( 32 / 212 o F) 15 0 o C to 150 o C ( 32 / 302 o F) 20 0 o C to 200 o C ( 32 / 392 o F) o C to 50 o C ( 58 / 122 o F) o C to 150 o C ( 58 / 302 o F) o C to 200 o C ( 58 / 392 o F) L* 50 o C to 200 o C ( 58 / 392 o F) H* 200 o C to 600 o C ( 328 / 1112 o F) * Code L & H are not factory calibrated. Requires customer calibration using the MIST PKIT. Notes: 1. MIST Temperature Sensors are factory calibrated at one point to an accuracy of ± º C or better. See MIST specs. 2. For nonstandard temperature ranges, indicate desired value in º C or º F in Box1 or see web site 3. Order MIST PKIT for sensor customization. BOX2 LP LD VA VB VD Output 420 ma loop, upscale burnout ( std.) 420 ma loop, downscale burnout 05 Vdc, 3wire 15 Vdc, 3wire 010 Vdc, 3wire Other outputs available. Consult factory. BOX3 Probe Diameter D D 1/4 F 3/8 H 1/2 Sheath O.D. Tip O.D. DB 1/4 1/8 FC 3/8 3/16 HC 1/2 3/16 HD 1/2 1/4 JD 5/8 1/4 Other diameters available. Consult factory. BOX4 BOX6 N Probe Material S Stainless steel 316 / 316 Other materials available. Consult factory. BOX5 BOX7 EN EE* Probe Length L In 0.1 inch increments Ex.: 065= 6.5 long Extension Length C In 0.1 increments ( 2.5 Std. ) Ex.: N25= 2.5 long Instrument Connection 1/2 NPT male 1/2 NPS male * Code EE is standard when ordereing with a head. BOX8 T10 Hygienic clamp union, 1 T15 Hygienic clamp union, 1.5 T20 Hygienic clamp union, 2 T25 Hygienic clamp union, 2.5 T30 Hygienic clamp union, 3 Other fittings available. See page 11 & consult factory. BOX9 0 PO* BA2 SS2 CS* CX* Head/ Termination No head, supplied with 6 single teflon leads White polypropylene screw cover, meets NEMA 4X / IP65 requirements Bakelite screw cover, meets NEMA 4X / IP65 requirements Machined & polished stainless steel 316 / 316L screw cover, meets NEMA 4X / IP66 requirements Cast stainless steel 316 screw cover, meets NEMA 4X / IP66 requirements Cast stainless steel, explosion proof, CSA, FM Approval Class I, Div. 1, Gps. B,C & D Class II, Div. 1, Gps. E, F & G, NEMA 4X *2= 1/2 NPT Conduit *3= 3/4 NPT Conduit 1 SF F1 F4 Surface Finish 32 μin ( 0.8 μm ) Ra max. or better 20 μin ( 0.5 μm ) Ra max., w / o EP 15 μin ( 0.4 μm ) Ra max., with EP A10.0

11 MIST Sanitary Series Hygienic clamp union connection Clamp Gasket Pipe Probe Clamp for hygienic connection Intempco Sanitary Series Intempco offers a complete line of hygienically designed process measurement devices which are perfectly suited for use in food, dairy, chemical, and pharmaceutical industries. Intempco sanitary sensors carry the 3A mark and are designed and manufactured to meet the requirements of 3A Sanitary Standards for Sensors and Sensors Fittings and Connections Number. Intempco sanitary sensors are easily installed into a tee, cross, or directly into a sanitary tube and feature all stainless steel construction. All popular sanitary connection styles available. Wetted surfaces are machined and polished to meet 3A standards and are free of pits and crevices that might shelter bacteria or impurities. Assemblies are hermetically sealed and built to withstand industrial washdowns. Intempco sanitary sensors contain an encapsulated platinum RTD Class A element providing high accuracy, repeatability and vibration resistance. Assemblies are available with a variety of electrical connections and connection heads ( including stainless steel, polypropylene and Bakelite ) for easy wiring. A wide variety of options are available, including dual elements and reduced tips which improve time response without compromising the mechanical strength of the sensor. MIST Series Sanitary Sensors have an integrated transmitter with a variety of output options such as 420 ma loop powered or 3 wire voltage output with 05 VDC, 15 VDC and 010 VDC options. CherryBurrell connection Clamp Gasket Pipe Bevel Seat connection Nut Probe Probe Pipe T12 T34 T10 T15 T20 T25 T30 T40 Hygienic clamp union, 1/2 per ASMEBPE Hygienic clamp union, 3/4 per ASMEBPE Hygienic clamp union, 1 per ASMEBPE Hygienic clamp union, 1.5 per ASMEBPE Hygienic clamp union, 2 per ASMEBPE Hygienic clamp union, 2.5 per ASMEBPE Hygienic clamp union, 3 per ASMEBPE Hygienic clamp union, 4 per ASMEBPE A15 CherryBurrell male I, 11/2 A20 CherryBurrell male I, 2 A25 CherryBurrell male I, 21/2 A30 CherryBurrell male I, 3 B15 CherryBurrell female I, 11/2 B20 CherryBurrell female I, 2 B25 CherryBurrell female I, 21/2 B30 CherryBurrell female I, 3 C15 Bevel Seat ( w/nut ), 11/2 C20 Bevel Seat ( w/nut ), 2 C25 Bevel Seat ( w/nut ), 21/2 C30 Bevel Seat ( w/nut ), 3 D15 Bevel Seat ( w/o nut ), 11/2 D20 Bevel Seat ( w/o nut ), 2 D25 Bevel Seat ( w/o nut ), 21/2 D30 Bevel Seat ( w/o nut ), 3 F15 John Perry ( w/nut ), 11/2 F20 John Perry ( w/nut ), 2 F25 John Perry ( w/nut ), 21/2 F30 John Perry ( w/nut ), 3 G15 John Perry ( w/o nut ), 11/2 G20 John Perry ( w/o nut ), 2 G25 John Perry ( w/o nut ), 21/2 G30 John Perry ( w/o nut ), 3 XXX Other, specify A11.0

12 MIST PKIT Programming Module & Software Description The MISTKIT is used to recalibrate and rescale MIST Temperature Sensors. Two methods of calibration are available. The first, called One Point Calibration, is performed by setting the MIST Temperature Sensor to a known temperature and adjusting the 420 ma output to the corresponding value. The second method, called Two Point Calibration, is performed by setting the MIST Temperature Sensor to a known point in the operating range and then recording this point by simply clicking the corresponding button. The next step is to set the MIST Temperature Sensor to a second known point in the operating range and record it in the same manner. Finally, by clicking on the Process button, the calibration parameters are automatically calculated and saved in the MIST Temperature Sensor memory. The MIST PKIT software can also be used to rescale the MIST Temperature Sensors output within its operational limits. A choice of many standard ranges are available via a dropdown menu. Custom ranges can alos be specified. Once the range is selected, simply clicking on the Set button will automatically rescale the output and save the new values in the MIST Temperature Sensor memory. Kit Includes MIST PKIT Calibration Interface Software MIST TM calibration software CD ROM Communication module with USB or RS232 interface 110 VAC Wall adapter ( for RS232 module ) or USB cable ( for USB module ) Minimum System Requirements Ordering Information MODEL MIST PKIT Communication Type 1 Serial, RS232 2 USB 1 _ Windows TM XP or Vista Pentium III 600 MHZ or better 10 MB of free disk space 256 MB of RAM 1 serial port or USB A12.0

13 MIST Sanitary Series TECHNICAL SPECIFICATIONS Electrical Properties Input : Sensor Temperature Ranges : Outputs : Minimum Input Impedance : Power Supply : Supply Effect : RTD, type Pt100 See Box1 code for standard ranges. Field rescalable between 200 o C to 600 o C or 50 o C to 200 o C, depending on model. 420 ma loop powered, 2wire, linear to temperature 05 Vdc, 15 Vdc, 010 Vdc all 3wire, linear to temperature 1000 Ohm (of measuring device, for voltage output) 1232 VDC, polarity protected %/V Accuracy : ±(.25 o C % of span ) with onepoint calibration 1. ±(.10 o C % of calibrated span ) with twopoint calibration 2. Maximum Loop Resistance : Sensor Open Circuit : Warmup : RFI Effect : Isolation : Temp. Effects : Long Term Drift : Mechanical Properties Sanitary Series Wetted Surface Material : Environmental Rating Head assemblies : Cabled probe and M12 connection : [( Vsupply 7 ) * 40 ] ohms (for 420 ma output only) Upscale 24 ma or Downscale 2.5 ma (for 420 ma output only) 30 seconds 1 % or less typical 500 VDC Input / Output ± % of Span / o C 0.1 % FS / Year Stainless steel 316 / 316L, dual certified Refer to head enclosures specifications Meets NEMA 6P ( IP67 ), hermetically sealed Cable Material : PVC, Teflon, SS armor over Teflon Protection : Storage Temp. Range : Meets NEMA 6P ( IP67 ), hermetically sealed 40 o C to 80 o C Operating Temp. Range : 40 o C to 80 o C ( housing only ) Maximum Operating Pressure : 500 PSIG ( applies to sensor portion only ) Standard Surface Finish : Code SF Maximum Ra of 32 μin ( 0.8 μm ) or better as per 3A Pharmaceutical Surface Finish : Code F1 Pharmaceutical Surface Finish : Code F4 Approbations 3 : Per ASME BPE 2009 SF1 20 μin ( 0.5 μm ) Ra max. without electro polish Per ASME BPE 2009 SF4 15 μin ( 0.4 μm ) Ra max. with electro polish 3A symbol authorization 3A Sanitary Standards for Sensors and Sensors Fittings & Connections Number Teflon is a reigistered trademark of E.I. du Pont de Nemours and Comapny. 1. Max. error on complete span. Error at calibration point 0.1 % of Span. 2. Max. error on complete calibrated span. Error at calibration points 0.1 % of Span. 3. Intempco sanitary sensors bearing the 3A symbol meet the requirements of 3A Sanitary Standards for Sensors and Sensor Fittings and Connections, Number, with some exceptions to section D10 for heat sterilization systems. Intempco sensors meet the requirements of section D10.1 and D for sterilization of the product contact surfaces, with exception made for section D and D Intempco sensors do not have a steam or other sterilization chamber surrounding the joint at the product contact surfaces between the fitting and the devices. A13.0

14 Notes : Intempco USA, Inc. 165 State Street, Suite C, Hackensack, NJ Tel.: (201) Fax : (201) Intempco Controls Ltd. 2511, Guenette, Montreal (Quebec) H4R 2E9 Tel.: (514) Fax : (514) A14.0