Firestone Building Products UC-6RS
|
|
- Barrie Cross
- 5 years ago
- Views:
Transcription
1 Firestone Building Products UC-6RS DRAFT SPECI FI CATI ON AND I TS I NTENDED USE I S AS A BASE FOR DESI GN AND I S NOT TO BE USED AS A FI NAL DESI GN DOCUMENT OR SPECI FI CATI ON WI THOUT EDI TI NG TO I NDI CATE CHOI CES WHERE ONE I S GI VEN. FI RESTONE BUI LDI NG PRODUCTS FI RESTONE ROOFI NG SYSTEMS THI S SPECI FI CATI ON WAS GENERATED USI NG SAMPLE SPECI FI CATI ONS PROVI DED BY FI RESTONE METAL SYSTEMS. THE SPECI FI CATI ONS FOR ROOFI NG SYSTEMS HEREI N DESCRI BED ARE GENERAL GUI DELI NES AND NOT TO BE CONSTRUED AS FI NAL, BI NDI NG OR AUTHORI TATI VE. THE SPECI FI CATI ONS HAVE BEEN CREATED FROM I NFORMATI ON PROVI DED TO FI RESTONE BUI LDI NG PRODUCTS BY PROJECT SPECI FI ERS AND DESI GN PROFESSI ONALS AND ARE I NTENDED ONLY AS A TOOL TO AI D AND ASSI ST I N THE PROCESS OF SELECTI NG ROOFI NG MATERI ALS. THE SPECI FI CATI ONS GENERATED AND THE MEANS FOR DERI VI NG THEM ARE NOT I NTENDED TO SUBSTI TUTE FOR THE EXPERI ENCE, KNOWLEDGE AND JUDGEMENT OF PROPERLY QUALI FI ED DESI GN PROFESSI ONALS, ARCHI TECTS, SPECI FI ERS, ENGI NEERS AND/ OR ROOFI NG CONTRACTORS. THE ULTI MATE SELECTI ON AND PRODUCTI ON OF A SPECI FI CATI ON FOR ANY PARTI CULAR USE REMAI NS THE RESPONSI BI LI TY OF THE BUI LDI NG OWNERS AND THEI R DESI GN PROFESSI ONALS. The Specifications are provided without charge or cost and are provided on an AS-I S basis. The User of this Product and the Specifications it generates assum es the entire risk as to results, quality, accuracy and perform ance of the Specifications. Firestone Building Products does not warrant, guarantee, or m ake any representations regarding the use of, or the results of the Specification as applied in the field or otherwise. Firestone Building Products assum es no responsibility or liability for any defects in design or construction of the building, the roofing system selected, or the surface over which the roof products are applied. Firestone Building Products assum es no responsibility for the design, engineering, construction or architecture of the roof, roofing system or building and in no way confers its approval of or endorses any specific design, m ethods or system as a result of the use of this Product or its Specifications. FI RESTONE BUI LDI NG PRODUCTS SELLS ROOFI NG MATERI ALS THAT ARE COVERED BY SPECI FI C MANUFACTURER S W ARRANTI ES W HI CH ARE I NCORPORATED HEREI N BY REFERENCE AND AS SUCH ARE THE ONLY W ARRANTY PROVI DED. ALL OTHER W ARRANTI ES OF ANY KI ND, ORAL OR W RI TTEN, EI THER EXPRESS OR I MPLI ED, I NCLUDI NG BUT NOT LI MI TED TO THE I MPLI ED W ARRANTI ES OF QUALI TY, PERFORMAN CE, MERCHANTABI LI TY AND FI TNESS FOR A PARTI CULAR PURPOSE ARE HEREBY DI SCLAI MED. NO FI RESTONE BUI LDI NG PRODUCTS DEALER OR AGENT I S AUTHORI ZED TO MAKE ANY MODI FI CATI ON, EXTENSI ON, OR ADDI TI ON TO THI S W ARRANTY. THI S W ARRANTY MAY ONLY BE MODI FI ED BY AN OFFI CER OR DULY AUTHORI ZED EMPLOYEE OF FI RESTONE BUI LDI NG PRODUCTS AND ONLY I N W RI TI NG. I N NO EVENT SHALL FI RESTONE BUI LDI NG PRODUCTS BE LI ABLE FOR ANY LOSS OF PROFI T OR ANY OTHER COMMERCI AL DAMAGE I NCLUDI NG BUT NOT LI MI TED TO SPECI AL, I NCI DENTAL, CONSEQUENTI AL OR OTHER DAMAGES. Use of this product does not indicate any endorsem ent, by Firestone Building Products, of the Product User, the Product User s Com pany, nor of any Specifications generated by or with the use of the Product. Fax: / 20/ 08
2 Note to Specifier: Select appropriate Sections below or add other related Sections.
3 in a perm anent factory environm ent with fixed-base rollform ing equipm ent] [ By a factory authorized contractor using only Firestone authorized and inspected equipm ent]
4
5
6 Note to Specifier: Select proper term in subparagraph below. Note to Specifier: Fill in other m anufacturers below or require other m anufacturers to subm it inform ation which supports their products for the Architect's review prior to bidding; delete paragraph below if prior approvals or substitutions will not be considered.
7 Note to Specifer: Select [ steel] [ alum inum ] [ copper] [ RHEI NZI NK ] Panels paragraphs A below. Note to Specifier: Select proper gauge in subparagraph below. Note to Specifier: Select proper gauge in subparagraph below. Note to Specifier: Select thickness in subparagraph below. Æ Note to Specifier: Select thickness in subparagraph below. Note to Specifier: Select seam spacing in subparagraph below.
8 Note to Specifier: Select from paragraphs below for desired finish: A for painted, B for anodized, C for copper and D for Zinc. A s Note to Specifier: Verify num ber of coats with m anufacturer, dependent on color selection. Paint Finish Colors B s Note to Specifier: Anodized colors are subject to color variations within a coil as well as from batch to batch, differ in cost; custom colors m ay be available at an additional cost; contact m anufacturer for details.
9 C s Note to Specifier: Copper is a natural m aterial and m ay be subject to color variations in the base m aterial and during the weathering/ aging process. Note to Specifier: Patriot Green Pre-Patinated, paint treated Copper shows part of the copper through a uniform special coat of paint the gives way when the exposed copper oxidizes with natural aging. Architectural Grade Sheet Copper (AGSC) is a natural product and is subject to natural color variations during the weathering/ aging process after installation. D s Note to Specifier: RHEI NZI NK is a natural m aterial and m ay be subject to color variations in the base m aterial within a coil and during the weathering/ aging process. Note: Zinc m ust be installed with m aterials and am bient at 50 degrees F and rising. 2. Slopes greater than 5 in 12 m ay use synthetic, non self-adhering underlaym ents in the field of the roof with self adhering m em brane applied at ridges, hips, eves, base tie-in/ flashings, valleys, penetrations or details as specified by Firestone.
10 Note to Specifier: I f exposed fastener color m ust m atch panel, trim, or accessories. Fastener color m ust be specified.
11 Note to Specifier: I f curb finish and color is to m atch roof panel finish, the finish and color m ust be specified. Æ Note: Zinc m ust be installed with m aterials and am bient at 50 degrees F and rising.
12 Note to Specifier: A certain am ount of waviness called oil canning is inherent in any product m anufactured from coiled sheet m aterial. The am ount of oil canning can vary due to several factors: uneven substrates, the width of the panel, weather conditions, etc. Oil canning of a panel does not affect its structural integrity and is not sufficient cause for rejection.
FI RESTONE ROOFI NG SYSTEMS
FI RESTONE ROOFI NG SYSTEMS FI RESTONE BUI LDI NG PRODUCTS SELLS ROOFI NG MATERI ALS THAT ARE COVERED BY SPECI FI C MANUFACTURER S W ARRANTI ES W HI CH ARE I NCORPORATED HEREI N BY REFERENCE AND AS SUCH
More informationTable of Contents. Notes to Designer/User Map of Typical Roof Conditions Fastener Placement Fastener Selection...
Table of Contents Section Page Notes to Designer/User... 2-3 Map of Typical Roof Conditions... 4 Fastener Placement... 5 Fastener Selection... 6 Ridge/Hip Flashing... 7 Valley Flashing... 8 Eave Flashings...
More information4. Metal roof jacks at penetrations and attachments
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - SECTION 07 61 00 METAL SHINGLE ROOFING - - - - - - - - - - -
More informationREGAL. Installation Manual
REGAL Installation Manual General Information The details shown on the following pages are suggestions or guidelines for installing the Regal system. The installation details shown here are proven methods
More informationStone coated steel roof tile INSTALLATION GUIDE
Stone coated steel roof tile INSTALLATION GUIDE Ⅰ. Introduction These installation details are provided to demonstrate recommended installation methods for KD One roof products and accessories. Consult
More informationName: Date: (a) (b) (c) (d) (e) (f) (g) (h)
Chapter 4: Tolerancing Name: Date: P4-3) Fill in the given table for the following shaft and hole limits. Shaft Hole (a) (b) (c) (d) (e) (f) (g) (h) 5.970 79.990 16.029 25.061 120.000 2.000 30.000 8.000
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 SHEET METAL FLASHING AND TRIM PART 1 GENERAL 1.1 SUMMARY A. Section includes flashings and counterflashings, sheet metal roofing and fabricated sheet metal items, as indicated in Schedule.
More informationUART Deta ls. Background. Interface. Data Transm ss on Control
Background UART Deta ls A Un versal Asynchronous Rece ver/transm tter (UART) s used to mplement ser al commun cat on. It s a standard p ece of hardware, although manufacturers make sl ghtly d fferent vers
More informationFLASHINGS FLASHINGS REVSPEC. Valley Gutter Example V1 V2 V3 V4 V5 V6. Ridge Capping. Low Profile Ridge Capping CUSTOM MADE VALLEY GUTTER
CUSTOM MADE VALLEY GUTTER The Revolution Roofi ng Valley Gutter is used to fi t between two internal roof slopes to prevent the ingress of water into the roof space, it acts as an internal shallow gutter
More informationMetal Roof Installation Manual. Chapter 2: Metal Roofing: A Family of Products / History of Metal Roofing
Metal Roof Installation Manual Chapter 2: Metal Roofing: A Family of Products / History of Metal Roofing Chapter 2: Metal Roofing: A Family of Products / History of Metal Roofing Chapter Contents 2. Metal
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: METAL SHINGLES SECTION: METAL ROOF PANELS REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3564 Reissued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00
More informationSECTION SHEET METAL FLASHING AND TRIM
SECTION 07620 PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Formed roof drainage sheet metal fabrications. 2. Formed low-slope roof sheet metal fabrications. 1.2 SUBMITTALS A. Shop Drawings: Show
More informationSlate Shingle Specifications
Slate Shingle Specifications California Slate is a proud member of the Slate Roofing Contractors Association of North America, Inc. (SRCA) which publishes Section 07310 Slate Shingles setting forth architectural
More informationENDUREED VIVA SERIES Specifications
ENDUREED VIVA SERIES Specifications SECTION 07312 HDPE THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Viva Series synthetic thatch shingles.
More informationInterlock Slate / Cedar Specification Manual. Lifetime Roofing Systems
Interlock Slate / Cedar Specification Manual Interlock Roofing Interlock Slate / Cedar is a four way interlocking aluminum roofing system. Each one is coated with the Alunar Coating System, embedded with
More informationFCC PART & I C RSS CLASS I I PERMI SSI VE CHANGE 2.4 GHz FHSS TEST REPORT
FCC PART 1 5.2 4 7 & I C RSS- 2 4 7 CLASS I I PERMI SSI VE CHANGE 2.4 GHz FHSS TEST REPORT 8 4 9 NW State Road 4 5 New berry, FL 3 2 6 6 9 USA Ph.: 8 8 8.4 7 2.2 4 2 4 or 3 5 2.4 7 2.5 5 0 0 Fax: 3 5 2.4
More informationSECTION SLATE SHINGLES. 1.1 SUMMARY A. Section Includes: 1. Slate shingles over underlayment nailed to roof sheathing.
SECTION 07 31 26 SLATE SHINGLES SPEC WRITER NOTES: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Slate shingles
More informationROOFING City of Grand Rapids Building Safety Division
ROOFING City of Grand Rapids Building Safety Division 218-326-7601 www.cityofgrandrapidsmn.com This handout is intended only as a guide and is based in part on the 2015 Minnesota State Building Code, Grand
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER: IKO INDUSTRIES LIMITED
0 Most Widely Accepted and Trusted ICC-ES Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3532 Reissued 01/2017 This report is subject to renewal 01/2019. DIVISION: 07 00 00 THERMAL
More informationDURATION DESIGNER COLORS COLLECTION
TruDefinition DURATION DESIGNER COLORS COLLECTION Shingles with Patented SureNail Sedona Canyon Technology Intense Harmony Bright. Bold. Brilliant. The world around us is full of color. From the cars we
More informationB. Related Sections: The following Sections contain requirements that relate to this Section:
SECTION 07311 - ASPHALT SHINGLES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationTremLock T-138 INSTALLATION MANUAL T-138 www.tremcoroofing.com 3735 Green Road Beachwood, Ohio 44122 1.800.852.6013 50 Beth Nealson Drive Toronto, Ontario M4H 1M6 1.800.668.9879 7241 6/8/18 TABLE OF CONTENTS
More informationICC-ES Evaluation Report Issued February 1, 2011 This report is subject to re-examination in one year.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-3098 Issued February 1, 2011 This report is subject to re-examination in one year. A Subsidiary of the International Code Council
More informationSUBMITTAL SHEET. Project Submittals by
Galvanized Tie Wire and Hanger Wire Submittal of Product Performance SUBMITTAL SHEET Project Submittals by GRABBER CONSTRUCTION PRODUCTS, INC. Submittal Date: Contract Number: Project Name: Section Number:
More informationProduct Specification PE42540
PE4540 Product Description The PE4540 is a HaRP technology-enhanced absorptive SP4T RF switch developed on UltraCMOS process technology. This switch is designed specifically to support the requirements
More informationWESTERN WAVE Panel. Vertical Installation and Technical Information
WESTERN WAVE Panel Vertical Installation and Technical Information Western States Western Wave Wall and Soffit Panels (Vertical) Installation, Flashings & Shop Drawing Detail Guide Section Notes to Designer
More informationWESTERN WAVE Panel. Horizontal Installation and Technical Information
WESTERN WAVE Panel Horizontal Installation and Technical Information Western States Western Wave Wall and Soffit Panels Installation, Flashings & Shop Drawing Detail Guide Table of Contents Section Page
More informationProSnap 100 STANDARD DETAILS
ProSnap 100 OVER WOOD DECK STANDARD DETAILS Austin - Headquarters/Sales Office 830 Sagebrush Drive Austin, TX 78758 (512) 452-1515 (800) 428-7412 Fax (512) 833-7499 www.ctmrs.com email: info@ctmrs.com
More informationTABLE OF CONTENTS A-1
TABLE OF CONTENTS PAGE NUMBER: DETAIL DESCRIPTION A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1...GENERAL INFORMATION C-1...EAVE DRIP DETAIL C-2...EAVE DRIP with GUTTER DETAIL C-3 & C-4...FIXED RIDGE
More informationeco-shake INSTALLATION INSTRUCTION
1 eco-shake INSTALLATION INSTRUCTION NOTE: Shuffling the eco-shakes during installation may be necessary to obtain a uniform color throughout the roof. Due to the natural wood content in the ecoshakes,
More informationTable of Contents Light Gauge Metal Roof & Wall Panels
Table of Contents Light Gauge Metal Roof & Wall Panels Installation Guide for Delta Rib, Nor-Clad, Strata Rib & 2-1/2 Corrugated Introduction Important Notice Notes: April 2008 Minimum Recommended Tools
More informationSECTION ASPHALT SHINGLES
SECTION 07311 ASPHALT SHINGLES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Asphalt shingle roofing. 2. Flexible sheet membranes for eave protection, underlayment, and valley protection. 3. Associated
More informationSuggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002
Suggested Specification for Preparing Hot-Dip Galvanized Steel Surfaces for Painting Revised February 2002 This suggested specification is provided as a guide to preparing a quality document calling for
More informationThe Roofing Industry Committee
The Roofing Industry Committee on Weather Issues (RICOWI) dispatched seven teams to investigate damage after Hurricane Charley hit the U.S. on August 13, 2004, and five teams after Hurricane Ivan made
More informationThe new steep-slope manual
The new steep-slope manual The latest NRCA roofing manual addresses steep-slope roof system design, materials and application by Maciek Rupar In January, NRCA released The NRCA Roofing Manual: Steep-slope
More informationDURABLE, STABLE AND LOW MAINTENANCE SIDING
Innovation in wood DURABLE, STABLE AND LOW MAINTENANCE SIDING Available from: CREATED FROM SUSTAINABLY SOURCED WOOD AND COMPLETELY NON-TOXIC, ACCOYA IS A REVOLUTION IN WOOD TECHNOLOGY. Toronto train, Canada
More informationSECTION WOOD SHINGLES
SECTION 07 31 29.13 WOOD SHINGLES SPEC WRITER NOTES: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. This guide specification does not include requirements
More informationSECTION PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY
SECTION 07312 PVC THATCH SHINGLE ROOFING SYSTEM PART 1 GENERAL 1.01 SUMMARY A. This Section Includes the following: 1. Endureed Dominica PVC thatch shingles. 2. Self- adhering sheet underlayment. B. Related
More informationGUIDELINE SPECIFICATIONS
GUIDELINE SPECIFICATIONS GORDON MILLENNIUM DECORATIVE METAL COLUMN COVERS DIVISION 05 7500 or DIVISION 09 2000 Note To Specifier: Column Covers are a finished, decorative product and should be installed
More informationSECTION ASPHALT SHINGLES
(Specifier Note: The purpose of this guide specification is to assist the specifier in correctly specifying glass-fiber-reinforced asphalt shingle products for sloped roofing applications. The specifier
More informationInstallation Guidelines
Installation Guidelines Exteria Building Products provides these instructions as general guidelines only. Exteria Building Products neither installs siding nor has any control over any installation. The
More informationA. Rough carpentry includes but is not limited to the following:
SECTION 06100 ROUGH CARPENTRY PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division-1 Specification Sections,
More informationICC-ES Evaluation Report Reissued September 1, 2012 This report is subject to renewal September 1, 2013.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-1790 Reissued September 1, 2012 This report is subject to renewal September 1, 2013. A Subsidiary of the International Code Council
More informationFT DIX ELEMENTARY SCHOOL PHASE VII, CLASSROOM ADDITION PEMBERTON TOWNSHIP REGAN YOUNG ENGLAND BUTERA, PC PROJECT #5349A
SECTION 061050 - MISCELLANEOUS CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More information1.04 QUALITY ASSURANCE
SECTION 07312 ARCHITECTURAL ASPHALT SHINGLES PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationSECTION ROUGH CARPENTRY
SECTION 06 10 00- ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including Contracting Requirements and Division 1 Specification Sections, apply
More informationESR-1129 Reissued June 1, 2011 This report is subject to renewal in two years.
ICC-ES Evaluation Report ESR-1129 Reissued June 1, 2011 This report is subject to renewal in two years. www.icc-es.org (800) 423-6587 (562) 699-0543 A Subsidiary of the International Code Council DIVISION:
More informationTECHNICAL BULLETIN NEW ICC ES EVALUATION REPORT
TECHNICAL BULLETIN NEW ICC ES EVALUATION REPORT [March 25, 2015] Malarkey recently received our new, updated ICC ES Evaluation Report (ESR 3150) which includes the additions of Windsor shingles and all
More informationPRODUCT EVALUATION Effective July 1, 2009 RC-204
TEXAS DEPARTMENT OF INSURANCE Engineering Services / MC 103-3A 333 Guadalupe Street P.O. Box 149104 Austin, Texas 78714-9104 Phone No. (512) 322-2212 Fax No. (512) 463-6693 PRODUCT EVALUATION Effective
More informationSECTION BULLET- RESISTANT DOORS
1 SECTION 08 3950 BULLET- RESISTANT DOORS PART 1- GENERAL 1.01 SUMMARY A. This Section Includes: 1. Bullet- resistant steel door and frame systems. 2. Door hardware for bullet- resistant steel door and
More informationBARRELL VAULT BATTENLESS
i BARRELL VAULT BATTENLESS INSTALLATION GUIDE INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation of the Gerard Barrel Vault battenless
More informationPROJECT INSTRUCTIONS Roofing
PROJECT INSTRUCTIONS Roofing This handout outlines some basic regulations contained within the 2015 Minnesota State Building Code, as well as other good building practices. However, this handout is not
More informationInspire Aledora Slate Application Guidelines
July 2014 Inspire Aledora Slate Application Guidelines Only Basic Roofing Tools Required Hand fastened or fastened with a pneumatic nail gun Utility knife or a standard circular saw Tape measure, pry bar,
More informationRESIDENTIAL ROOFS ADDENDUM NUMBER ONE. August 28, 2017
RESIDENTIAL ADDENDUM NUMBER ONE August 28, 2017 The following additions to, deletions from, and clarifications of the Contract Documents govern insofar as they apply and shall take precedence over those
More informationInstallation Guidelines
Installation Guidelines Exteria Building Products provides these instructions as general guidelines only. Exteria Building Products neither installs siding nor has any control over any installation. The
More informationATOMIC. ASM Panel Brochure ARCHITECTURAL SHEET METAL,
ATOMIC ARCHITECTURAL SHEET METAL, INC. ASM Panel Brochure 3207 Labore Road Vadnais Heights, MN 55110 Phone: 651-646-1706 Fax: 651-646-1684 atomic@atomicsheetmetal.com 1 of 1Page 0 of 0 ARCHITECTURAL SHEET
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More information2016 Specification Treads, Base, Stringers and other Amenities Wausau Tile Precast Epoxy Terrazzo
2016 Specification Treads, Base, Stringers and other Amenities 09400 Wausau Tile Precast Epoxy Terrazzo PART 1 - GENERAL 1.1 SUMMARY A. Perform all work required to complete, as indicated by the Contract
More information6RZ. > <8ms and <30ms performance versions > Single and dual element versions > Draw out case > Flush panel or rack mount > Made in Australia
High Speed Interposing Relay The Series comprises a range of compact low burden interposing relays for power utility protection and control applications. >
More informationThe City of Winnipeg SHINGLE ROOF REPLACEMENT Section Replacement of Shingle Roof - Louis Riel Library Page 1 of 5 Bid Opp. No.
Replacement of Shingle Roof - Louis Riel Library Page 1 of 5 PART 1 GENERAL 1.1 SCOPE OF WORK.1 Total roof area approximately 1,312 m 2. The Work includes, but is not limited to:.1 Removal and disposal
More informationHatteras Shingles. CertainTeed Shingle Applicator s Manual. YOUR OBJECTIVE: To learn the correct procedures for installing Hatteras shingles
CertainTeed Applicator s Manual Hatteras s 14 YOUR OBJECTIVE: To learn the correct procedures for installing Hatteras shingles HATTERAS SHINGLES Hatteras shingles are a premium oversize (18" x 36") roofing
More informationThompson Architectural TM-RIB PANEL ACCESSORY DETAIL GUIDE
TM-RIB PANEL ACCESSORY DETAIL GUIDE FL11101.1 FL11101.2 TA125 (UL580 Class 90) Certified Thompson Architectural Metal Roofing is proud to be a partner of the Energy Star Roof Products Program SINGLE SOURCE
More informationTurada Hardwood Shingles and Shakes Installation instructions
1. General 1.1 Maximum Exposure: Maximum exposure for wood shingles and shakes shall comply with Table 1 herein, unless specifically specified in the roof assemblies Product Approval. 1.2 Solid and Spaced
More informationTABLE OF CONTENTS A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1 & B-2...GENERAL INFORMATION (FASTENER PATTERNS)
FW SERIES TABLE OF CONTENTS PAGE NUMBER: DETAIL DESCRIPTION A-1...TABLE OF CONTENTS A-2...GENERAL NOTES B-1 & B-2...GENERAL INFORMATION (FASTENER PATTERNS) DETAILS C-1...SIMPLE BASE DETAIL with 1 1/2"
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER:
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1717 Reissued 12/2017 This report is subject to renewal 12/2018. DIVISION: 07 00
More informationLIGHTER, CLEANER, ENVIRONMENTALLY SOUND
R E - D R I E D T R E AT E D L U M B E R LIGHTER, CLEANER, ENVIRONMENTALLY SOUND Foreword The purpose of this booklet is to assist you in getting more value, performance, and satisfaction from pressure-treated
More informationSHEET METAL FLASHING AND TRIM Christ on the Mountain
SECTION 076200 - SHEET METAL FLASHING AND TRIM PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Compatibly with the bumping of flashings and trim as identified in the Membrane Roofing Section 075000.
More informationGURANTEED TECHNICAL PARTICULARS OF BACK CLAMP FOR LT CROSS ARM
Technical Specification of Back Clamp for LT Cross Arm (MS) Back clamp for LT Cross Arm made out of 50 x 6mm MS Flat suitable for 8m X 300 Kg PSC poles. After fabrication the cross arm shall be painted
More informationDIVISION 6 WOOD AND PLASTICS
DIVISION 6 WOOD AND PLASTICS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes the following: 1. Wood framing. 2. Wood supports. 3. Wood blocking. 4. Wood cants. 5. Wood nailers. 6. Wood furring.
More informationSeaml ess Val ue and I nt egr at i on: Sony Medi a Backbone Conduct or and Di gi t al Backbone. Apr i l 2011, v2
Seaml ess Val ue and I nt egr at i on: Sony Medi a Backbone Conduct or and Di gi t al Backbone Apr i l 2011, v2 Backbone Value Proposition The technologies used to capture, process, distribute and display
More informationThe Firestone QuickSeam Reinforced Perimeter Fastening Strip needs to be installed with appropriate fasteners at maximum centres of 300 mm.
3.3 Base Tie-in 3.3.1 Base Tie-in General In order to account for structural movement of the substrate, stresses inherent in the handling and production of elastomeric sheets and thermal variations, the
More informationOPERATORS MANUAL WEEKENDER STEEL LADDER RACK
OPERATORS MANUAL WEEKENDER STEEL LADDER RACK WWW.WEATHERGUARD.COM MODELS 1450 & 1475 1475 Shown INSTALLATION TIME Approximate installation time: 60 minutes (depending on truck equipment installation experience
More information1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and Highlights
1 Exam Prep NRCA Roofing Manual: Steep-Slope Roof Systems 2013 Tabs and s These 1 Exam Prep Tabs are based on the National Roofing Contractors Association (NRCA) manual listed below: Steep-Slope Roof Systems
More informationINSTALLATION GUIDE WOOD PIVOTING CIRCLE/ OVAL
WOOD PIVOTING CIRCLE/ OVAL READ SPECIFIC INSTALLATION INSTRUCTIONS COMPLETELY BEFORE STARTING ANY INSTALLATION Failure to install and maintain our product according to these instructions will VOID any
More informationSG-30 A P P L I C A T I O N I N S T R U C T I O N S. Directions For Application
1 2 3 General Instructions NOTICE: THESE SHINGLES MUST BE APPLIED TO CONFORM WITH ALL APPLICABLE BUILDING CODES. THESE DIRECTIONS REPRESENT COMMON AND ACCEPTED ROOFING PRACTICES. DEVIATIONS FROM THESE
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 33 13 (May 2009) Change 2-11/12 --------------------------- Preparing Activity: USACE Nontechnical Title Revision (August 2015) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationDIVISION: THERMAL AND MOISTURE PROTECTION SECTION: ASPHALT SHINGLES REPORT HOLDER: GAF 1 CAMPUS DRIVE PARSIPPANY, NEW JERSEY 07054
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 1475 Reissued 10/2017 This report is subject to renewal 10/2019. DIVISION: 07 00
More informationCambridge English Application Instructions
Cambridge English Application Instructions ROOF SLOPE: Never apply asphalt shingles to roof slopes less than 2:12. For slopes 2:12 to 4:12 (LOW SLOPE), see special underlayment requirements outlined below.
More informationb) Symphony comes pre-packaged in color and width blends. There is no need to mix Symphony at the job site. Currently Symphony is available in the
PART 1 GENERAL 1) DESCRIPTION a) CertainTeed Symphony TM composite slate is an innovative roofing product that simulates the appearance, texture, and contours of traditional natural slate. It is a carefully
More informationACCESSORIES PEUGEOT SCOOTERS ACCESSORIES PEUGEOT SCOOTERS
ACCESSORIES PEUGEOT SCOOTERS ACCESSORIES PEUGEOT SCOOTERS / 0 A000 A00 A00 A0XX A0XX A0XX 0N 0AL A0I A00 0 HI GH WI NDSHI ELD ( 0MM) RI DER LEGS COVER PAI R OF HANDGRI P COVERS TOP BOX COLOR L WITH PASSENGER
More informationUnless otherwise directed, traditionally cast lead sheet is required.
LEAD ROOFING 1.0 SPECIFICATION OF LEAD SHEETING Unless otherwise directed, traditionally cast lead sheet is required. 2.0 STRIPPING Carefully strip old defective lead and existing coverings from roofs
More informationC803A Series. 8 " Coaxial Loudspeaker Available With Transformer. Specifications. Features. Thiele-Small Parameters. Applications. General Description
C803A Series 8 " Coaxial Loudspeaker Available With Transformer Features Industry Standard 8" (203mm) Coaxial, 16 Watt, Loudspeaker Offers Proven Performance with Wide Frequency Response Post-Mounted Tweeter
More informationInstallation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit.
Installation Guidelines For Quaker Window Products Aluminum flange fin sub sill & receptor system using a T mulled twin window unit. Installer: Read these instructions completely before starting any installation.
More informationInstallation Guidelines
Installation Guidelines Tando Building Products provides these instructions as general guidelines only. Tando Building Products neither installs exterior cladding nor has any control over any installation.
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-08 51 69.10 (April 2006) ----------------------------- Preparing Activity: NAVFAC Replacing without change UFGS-08582 (August 2001) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationinstallation guide Villa
installation guide Villa Table of Contents Introduction............................. 2 Safety................................... 2 Tools.................................... 2 Codes & Requirements....................
More informationSolid Surface Fabrications
USE THIS SECTION F WALL CLADDING AND MISCELLANEOUS FABRICATIONS OTHER THAN COUNTERTOPS. USE SECTION 06 61 18 F COUNTERTOPS. GENERAL NOTES TO SPECIFIER: THIS SPECIFICATION SECTION HAS BEEN PREPARED TO ASSIST
More informationSolving Challenging Flashing Applications
Page 1 of 7 Solving Challenging Flashing Applications By Mark Robins, Senior Editor, Posted 01/31/2017 How to apply flashing on challenging metal roof situations The majority of roof leaks occur at flashing
More informationRe-Roofing Policy SPECIAL REQUIREMENTS AND NOTES
CITY OF MANTECA COMMUNITY DEVELOPMENT DEPARTMENT 1001 West Center Street Manteca, CA 95337 FAX (209) 923-8949 Building Safety Division (209) 456-8550 Planning Division (209) 456-8500 Public Works/Engineering
More informationMILITARY SPECIFICATION
MIL-R-47196A(MI) 6 September 1977 SUPERSEDING MIL-R-46196(MI) 12 July 1974 MILITARY SPECIFICATION RIVETS, BUCK TYPE, PREPARATION FOR AND INSTALLATION OF This specification is approved for use by US Army
More informationPREPAINTED 55% Al-Zn COATED STEEL
North American Performance Validation For AESTHETICS and DURABILITY the choice for buildings is 55% Al-Zn COATED STEEL 55% Al-Zn THE MAGIC FORMULA FOR METAL BUILDINGS 55% Al-Zn THE MAGIC FORMULA FOR METAL
More informationBarrel Vault Counter Batten and Batten
Barrel Vault Counter Batten and Batten INSTALLATION GUIDE www.gerardusa.com INSTALLATION NOTIFICATION The installation procedures demonstrated in this manual are recommended methods for the installation
More informationViva Synthetic Thatch Installation Instructions
Viva Synthetic Thatch Installation Instructions Overview Structure This instruction manual is for the installation of VIVA on an open battened roof frame. Structure should be framed with weatherable wood
More information012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION)
012: 2015 CEB SPECIFICATION GALVANIZED STEEL WIRE (EXCEPT SHIELDING WIRE FOR TOWER LINE APPLICATION) CEYLON ELECTRICITY BOARD SRI LANKA Telephone: +94 11 232 8051 Fax: +94 11 232 5387 CONTENTS Page 1.0
More information1. Section : Rough Carpentry 2. Section : Exterior Insulation and Finishing Systems 3. Section : Metal Roof Panels
SECTION 06 16 00 SHEATHING PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Roof and Wall Sheathing. B. Related Sections: Documents relating to the work of this section include, but are not limited to,
More informationWood Fencing Special Order Catalog
Built by Barrette Outdoor Living Wood Fencing Special Order Catalog 1 V1 2/17 Your Fencing Options Buying wood fencing is as easy as 1-2-3. 1 Choose the panel style you prefer. 2 Choose your available
More informationP1\C-CL \D PETERSEN ALUMINUM CORPORATION FL23953 METAL ROOFING CATEGORY INSTALLATION DETAIL BINDER TABLE OF CONTENTS:
p P1\C-CL \D P E T E R S E N PETERSEN ALUMINUM CORPORATION FL23953 METAL ROOFING CATEGORY INSTALLATION DETAIL BINDER TABLE OF CONTENTS: Snap-On Standing Seam Panel 24GA Steel &.032" Aluminum... 2-3 Snap-Clad
More informationEkoroof LiteTile Dimensions
Ekoroof LiteTile Dimensions 7 3 3.5 Height 40 Width 20 Length Weight per Panel: 3 kg / 6.61 lbs 2 2 Area per panel 800 in / 5.55 ft 2 Panels per Square: 20 (including overlap, for a 100 ft covered area)
More informationEuro-Tray Roll Cap. Specific Profile Data Sheet BACK. Table of Contents. Technical Drawing File Downloads
Specific Profile Data Sheet 1 Technical Drawing formats available AutoDesk DWG Format AutoDesk RVT Format PDF Format Euro-Tray Roll Cap Table of Contents General Profile Information 2 Material Specifications
More informationLarge Scale CalArc Pavers for Sand-Set Pedestrian Use Installations
The following specification refers to the Stepstone, Inc. product known as: Large Scale CalArc Pavers for Sand-Set Pedestrian Use Installations Large Scale CalArc Pavers are part of the California Architectural
More information