Challenger, Fendt, Massey Ferguson and Valtra,
|
|
- Alyson Moore
- 5 years ago
- Views:
Transcription
1
2
3 Overview AGCO, Your Agriculture Corporation, was founded in We offer a full product line of tractors, combines, hay tools, sprayers, forage, tillage equipment, implements and related replacement parts. AGCO products are sold under the core brands of Challenger, Fendt, Massey Ferguson and Valtra, and are distributed globally through more than 3,150 independent dealers and distributors, in more than 140 countries worldwide. AGCO also provides retail financing through AGCO Finance. AGCO is headquartered in Duluth, Georgia and employs 17,000 employees worldwide. In 2012, AGCO s net sales were $9.9 billion. 3
4 Full Line of Award Winning Products 4
5 Where is Jackson, MN? 5
6 6
7 See the GD&T How PolyWorks helps with the instruction and understanding of GD&T AGCO
8 Three BASIC areas: 1) Multiple Datum Features, 2) Maximum Material Boundaries, 3) Datum Shift. 8
9 Some Slides will contain material from with permission. 9
10 Multiple Datum Features Surfaces Common Datum Plane Cylinders/Bores Common Datum Axis 10
11 Common Datum Axis 11
12 Common Datum Axis 12
13 Common Datum Axis 13
14 Common Datum Axis 14
15 Common Datum Axis 15
16 Common Datum Axis 16
17 Our first attempt years ago. 17
18 End up chasing our tails. 18
19 Zoom In Aligned to P. 19
20 A little closer. 20
21 Take out the Model Aligned to P. 21
22 Take out the Model Aligned to P. 22
23 Alternative Pattern as Primary. 23
24 Aligned to P what??? 24
25 Pattern: always at MMB. 25
26 Aligned to P(M) neither is perfect. 26
27 Multiple Datum Features 27
28 Multiple Datum Features 28
29 Multiple Datum Features 29
30 Aligned to P(M) neither is perfect. 30
31 MMB Its all about the Boundaries!
32 This is our Sample being measured with our Polyworks Inspection Software.
33 Datum Targets Defined by Print
34 Datum Targets Defined by the Print
35 Creating the Hard Stops
36
37
38
39
40 Datum A
41 Datum Features B and C as Originally called out on the Print with a TOP of 0.1 for each. They all pass. So why is it when we look at our next feature we get this
42 The GD&T is not computing for this 36.6 dia. Bore. Why is that?
43 The Stop Sign, when the mouse hovers over reveals this text box. This is a good time to talk about the Maximum Material Boundaries. What they are and what they do.
44 Zoomed in on Datum Feature B
45 We are now Zoomed in on Datum Feature B Comparing, Least Squares Dia. To URAME to RAME
46 Model Removed for ease of viewing.
47 Still Need our MMB 47
48 Comparing the Inner Boundary or the Maximum Material Boundary to the RAME of Datum Feature B. There is no interference.
49 No Interference from RAME and MMB 49
50 Let s look at Datum Feature C 50
51 Remove the model. 51
52 Create the MMB and the RAME. 52
53 The RAME may not violate the MMB. 53
54 Find the Interference. 54
55 What can we do? 55
56 Which really means 56
57 All is now well, the drf computes just as it is supposed too. Please keep in mind all bore diameters will be verified with A bore gage. When C s position tolerance was.1 there was Interference with the MMB and RAME. The software did what is was supposed to. Not allow us to continue with our inspection.
58 Seeing Datum Shift Because Shift Happens! AGCO
59 Datum Shift is not a bonus. 59
60 AST Alignment 60
61 Zoom in on Secondary Datum Feature 61
62 Aligned AST w/o Modifiers 62
63 Aligned AS(M)T(M) 63
64 A little shift can make a difference. 64
65 Pass or Fail. 65
66 Thank you, and Thank a Farmer.
Terms The definitions of 16 critical terms defined by the 2009 standard 1
856 SALT LAKE COURT SAN JOSE, CA 95133 (408) 251 5329 Terms The definitions of 16 critical terms defined by the 2009 standard 1 The names and definitions of many GD&T terms have very specific meanings.
More informationPattern Inspection with Variable Geometric Tolerance Limits
Pattern Inspection with Variable Geometric Limits From Disregarding to Fully Applying Variable Feature Bonus and Datum Shift s in a Pattern Inspection By Paul F. Jackson Variable Limit Specifications and
More informationIntroduction to GD&T Session 2: Rules and Concepts of GD&T
Introduction to GD&T Session 2: Rules and Concepts of GD&T An exploration of the language known as Geometric Dimensioning and Tolerancing Instructor: John-Paul Belanger Review Benefits of GD&T The GD&T
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals
More informationGeometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing (Known as GDT) What is GDT Helps ensure interchangeability of parts. Use is dictated by function and relationship of the part feature. It does not take the place
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning
More informationAgriterra Equipment. Agricultural equipment sales and trusted service across Alberta AGRICULTURE.
T H E M A G A Z I N E F O R LEADING B U S I N E S S E X E C U T I V E S AGRICULTURE Agriterra Equipment Agricultural equipment sales and trusted service across Alberta www.canadianbusinessexecutive.com
More informationPolyWorks Inspector Standard. 3 Day Course
PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options
More informationGD&T Reckoner Course reference material for. A Web-based learning system from.
GD&T Reckoner Course reference material for A Web-based learning system from This is not the complete document. Only Sample pages are included. The complete document is available to registered users of
More informationEngineering & Design: Geometric Dimensioning
Section Contents NADCA No. Format Page Frequently Asked Questions -2 s e c t i o n 1 Introduction -2 2 What is GD&T? -2 3 Why Should GD&T be Used? -2 4 Datum Reference Frame -4 4.1 Primary, Secondary,
More informationCREO 4.0: MODEL BASED DEFINITION (MBD)
CREO 4.0: MODEL BASED DEFINITION (MBD) Raphael Nascimento Product Manager PTC Creo 17 November, 2016 PTC Forum Europe Stuttgart, Germany Model Based Definition (MBD) AGENDA GD&T Advisor Questions? 2 Model
More informationGeometric Tolerances & Dimensioning
Geometric Tolerances & Dimensioning MANUFACTURING PROCESSES - 2, IE-352 Ahmed M. El-Sherbeeny, PhD KING SAUD UNIVERSITY Spring - 2015 1 Content Overview Form tolerances Orientation tolerances Location
More informationASME Y14.5M-1994 GD&T Certification Preparation Examination
ASME Y14.5M-1994 GD&T Certification Preparation Examination Directions: On the response sheet on the last page, fill in the circle of the letter which best completes the following statements. Do not write
More informationGeometric Boundaries II
Geometric Boundaries II Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Inch and Metric Units) Based on ASME Y14.5-2009 (R2004) Written and Illustrated by Kelly L. Bramble
More informationGeometry Controls and Report
Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for
More informationGeometric Boundaries
Geometric Boundaries Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Customary Inch System) Based on ASME Y14.5M-1994 Written and Illustrated by Kelly L. Bramble Published
More informationGeometric Dimensioning & Tolerancing
Western Technical College 31420350 Geometric Dimensioning & Tolerancing Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Recognition
More informationAnswers to Questions and Problems
Fundamentals of Geometric Dimensioning and Tolerancing Using Critical Thinking Skills 3 rd Edition By Alex Krulikowski Answers to Questions and Problems Second Printing Product #: 1103 Price: $25.00 Copyright
More informationFOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards
Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately
More informationTo help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD
To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and
More informationINDEX. Datum feature symbol, 21
INDEX Actual Mating Envelope, 11 Actual Minimum Material Envelope, 11 All Around, 149 ALL OVER, 157, 158,363 Allowed vs. actual deviations from true position, 82 Angularity, 136 axis, 140 line elements,
More informationGD&T Encoding and Decoding with SpaceClaim
GD&T Encoding and Decoding with SpaceClaim Dave Zwier Senior Technical Writer SpaceClaim GPDIS_2014.ppt 1 Biography Draftsman aerospace industry 1978-1980 B.S. Material Science Michigan State University
More informationVirtual CAD Parts to Enhance Learning of Geometric Dimensioning and Tolerancing. Lawrence E. Carlson University of Colorado at Boulder
Virtual CAD Parts to Enhance Learning of Geometric Dimensioning and Tolerancing Lawrence E. Carlson University of Colorado at Boulder Introduction Geometric dimensioning and tolerancing (GD&T) is an important
More informationMACHINE TOOL ALIGNMENT TESTS
MACHINE TOOL ALIGNMENT TESTS 39 MACHINE TOOL TESTING INTRODUCTION: The surface components produced by machining processes are mostly by generation. As a result, the quality of surface produced depends
More informationImproving Manufacturability
Improving Manufacturability GD&T is a Tool Not a Weapon Joe Soistman Quality Manufacturing Solutions, LLC Overview What is manufacturability, and why is it important? Overview What is manufacturability,
More informationGaging Exploration (Applications)
Gaging Exploration (Applications) PMPA Technical Conference Tomorrow is Today - Conquering the Skills Challenge Chicago, IL April 24, 2018 Gary K. Griffith Corona, California Gary K. Griffith 50+ Years
More information1994 Dimensioning & Tolerancing
ASME Y14.5M-1994 1994 Dimensioning & Tolerancing The new scanning generation Zeiss / Applied Geometrics, Inc. Applied Geometrics, Inc. Copyright 2003 1 Zeiss Carl Zeiss is one of the world's leading enterprises
More informationVacuum Chamber Datum QFC Case
Vacuum Chamber Datum QFC Case Goal: 1. Find mid-plane of the chamber: 3 dof (pitch, roll, y) 2. Find axis of the chamber: 2 dof (yaw, x) 3. Find origin of the chamber: 1 dof (z) TB4 TB2 X TB5 IN TB1 Y
More informationDRAFTING MANUAL. Dimensioning and Tolerancing Rules
Page 1 1.0 General This section is in accordance with ASME Y14.5-2009 Dimensioning and Tolerancing. Note that Rule #1 is the only rule that is numbered in the 2009 standard. All of the other rules fall
More information6/23/2016 Copyright 2016 Society of Manufacturing Engineers
6/23/2016 Copyright 2016 Society of Manufacturing Engineers --- 1 --- GEOMETRIC DIMENSIONING & TOLERANCING FUNDAMENTALS Form Controls & Datums - GDT2 TRT: 25:44 Minutes SCENE 1. GDT01A, CGS: FBI warning
More informationA Strategy for Tolerancing a Part 1
856 SLT LKE OURT SN JOSE, 95133 (408) 251 5329 Strategy for Tolerancing a Part 1 The first step in tolerancing a feature of size, such as the hole in Figure 14-1, is to specify the size and size tolerance
More informationTest Answers and Exam Booklet. Geometric Tolerancing
Test Answers and Exam Booklet Geometric Tolerancing iii Contents ANSWERS TO THE GEOMETRIC TOLERANCING TEST............. 1 Part 1. Questions Part 2. Calculations SAMPLE ANSWERS TO THE GEOMETRIC TOLERANCING
More informationAdvanced Dimensional Management LLC
Index: Mechanical Tolerance Stackup and Analysis Bryan R. Fischer Accuracy and precision 8-9 Advanced Dimensional Management 14, 21, 78, 118, 208, 251, 286, 329-366 Ambiguity 4, 8-14 ASME B89 48 ASME Y14.5M-1994
More informationAC : TEACHING APPLIED MEASURING METHODS USING GD&T
AC 2008-903: TEACHING APPLIED MEASURING METHODS USING GD&T Ramesh Narang, Indiana University-Purdue University-Fort Wayne RAMESH V. NARANG is an Associate Professor of Industrial Engineering Technology
More informationGEOMETRICAL TOLERANCING
GEOMETRICAL TOLERANCING Introduction In a typical engineering design and production environment, the designer of a part rarely follows the design to the shop floor, and consequently the only means of communication
More informationRepresentation of features Geometric tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 6 Representation of features Geometric tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130,
More informationThe Author. 1 st Edition 2008 Self-published by Frenco GmbH
The Author Graduate Engineer (Dipl. Ing., FH) Rudolf Och was born in Bamberg, Germany in 1951. After graduating in mechanical engineering he founded FRENCO GmbH in Nuremberg, Germany in 1978. In the beginning,
More informationWoven Steel Wire Fence Type-47. Under the state specification for fencing, ASTM A 116 is called out.
Woven Steel Wire Fence Type-47 Under the state specification 710.02 for fencing, ASTM A 116 is called out. Go to the steel and fencing certification manual for more information about the basic properties
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationGeometric Dimensioning & Tolerancing (GD&T) Training
Last Updated: Dec 2016 Geometric Dimensioning & Tolerancing (GD&T) Training Overview Course Code Duration : EK01 : 2 Days Geometric Dimensioning & Tolerancing (GD&T) is an international language commonly
More informationClarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing
Paper ID #5813 Clarifications of a Datum Axis or Centerplane Specifying in Maximum Material Condition of Geometric Dimensioning and Tolerancing Dr. Cheng Y. Lin P.E., Old Dominion University Dr. Lin is
More informationDavid A. Madsen. Faculty Emeritus
i Q eometric ' ' Dimensioning andtolerancing Ninth Edition Based on ASME Y14.5-2009 AWk A ejacy ofjejtccftence APPROVED PUBLICATION by David A. Madsen President, Madsen Designs Inc. www.madsendesigns.com
More informationUsing Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions
Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions 3 rd TRI-NATIONAL WORKSHOP AND MEETING OF THE NORTH AMERICAN COORDINATE METROLOGY ASSOCIATION 3D Measurement
More informationGD&T - Profile Tolerancing
GD&T - Profile Tolerancing PMPA Technical Conference Rapid Response to Make the Cut Grand Rapids, MI April 11, 2016 Gary K. Griffith Corona, California Gary K. Griffith 48 Years Exp. Technical Book Author
More informationInspection and Measurement
Inspection and Measurement Inspection An action to insure what is being manufactured conforms to the specifications by attributes use of gages: go or no-go by variables use of calibrated instruments Measurement
More informationManufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring Manual Process Planning
Manufacturing Processes (2), IE-352 Ahmed M El-Sherbeeny, PhD Spring 2017 Manual Process Planning Chapter Outline 2 1. Introduction 2. Manual Process Planning 3. Process Plan 4. Part Features Identification
More informationCOMMON SYMBOLS/ ISO SYMBOL ASME Y14.5M ISO FEATURE CONTROL FRAME DIAMETER/ SPHERICAL DIAMETER/ AT MAXIMUM MATERIAL CONDITION
1 82 COMMON SYMBOLS/ Shown below are the most common symbols that are used with geometric tolerancing and other related dimensional requirements on engineering drawings. Note the comparison with the ISO
More informationFits and Tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 7 Fits and Tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130, Phone: 8780, E-Mail: a.kovacevic@city.ac.uk
More informationEN1740 Computer Aided Visualization and Design Spring 2012
EN1740 Computer Aided Visualization and Design Spring 2012 1/31/2012 Brian C. P. Burke PLEASE WAIT TO LAUNCH PRO/E IF ALREADY OPENED, PLEASE CLOSE PLEASE WAIT TO LAUNCH PRO/E PLEASE CLOSE IF ALREADY OPENED
More informationEmpowering GD&T. Introduction. 1. Concepts
Empowering GD&T Copyright by Multi Metrics, Inc. 2017 All Rights Reserved Introduction The materials contained in this document represent an effort to clarify some of the most important concepts, tools
More informationBack in 1999 Nick August started out
Controlled-traffic farming in Oxfordshire: Farming on the straight and narrow Over the past decade, Oxfordshire farmer Nick August has progressed his precision farming operations. He started out with yield
More informationAC : CALCULATION OF TOLERANCE STACKS USING DIRECT-POSITION APPROACH IN GEOMETRIC DIMENSIONING AND TOLERANCING
AC 2009-138: CALCULATION OF TOLERANCE STACKS USING DIRECT-POSITION APPROACH IN GEOMETRIC DIMENSIONING AND TOLERANCING Cheng Lin, Old Dominion University American Society for Engineering Education, 2009
More informationANSI ORIFICE FLANGES METAL-KOREA
METAL-KOREA ANSI ORIFICE FLANGES ORIFICE FLANGES are widely used in conjunction with orifice meters for measuring the rate of flow of liquids and gases. They are basically the same as standard welding
More informationGeometric Dimensioning and Tolerancing
Geometric dimensioning and tolerancing (GDT) is Geometric Dimensioning and Tolerancing o a method of defining parts based on how they function, using standard ASME/ANSI symbols; o a system of specifying
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationDatum reference frame Position and shape tolerances Tolerance analysis
Datum reference frame Position and shape tolerances Tolerance analysis Šimon Kovář Datum reference frame Datum reference frames are typically for 3D. A typical datum reference frame is made up of three
More informationCOURSE SYLLABUS. Course Title: Introduction to Quality and Continuous Improvement
COURSE SYLLABUS Course Number: TBD Course Title: Introduction to Quality and Continuous Improvement Course Pre-requisites: None Course Credit Hours: 3 credit hours Structure of Course: 45/0/0/0 Textbook:
More informationAdvanced CO2 car Import CAM Procedures
Advanced CO2 car Import CAM Procedures While the standard CO2 car tutorial within Quick CAM has a part that is sized to fit the billet as custom designed cars are produced this will not be the case. Before
More informationWhat s New In SA CHAPTER
What s New In SA CHAPTER 1 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity
More informationMeasurement and Tolerances
Measurement and Tolerances Alessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus Measurement and Tolerances Sections: 1. Meaning of Tolerance 2. Geometric Dimensioning and Tolerancing
More informationA study of accuracy of finished test piece on multi-tasking machine tool
A study of accuracy of finished test piece on multi-tasking machine tool M. Saito 1, Y. Ihara 1, K. Shimojima 2 1 Osaka Institute of Technology, Japan 2 Okinawa National College of Technology, Japan yukitoshi.ihara@oit.ac.jp
More informationIntroduction. Objectives
Introduction As more and more manufacturers become immersed in the global economy, standardization plays a critical role in their success. Geometric dimensioning and tolerancing (GD&T) provides a set of
More informationInstallation Guide for Panel Mount Product
Installation Guide for Panel Mount Product There are 2 installation solutions for itech Panel Mount Product : I. Screw Mount Installation II. Clamp Mount Installation In general, screw mount is for those
More informationCMMs and GD&T. Dr. Henrik S. Nielsen HN Metrology Consulting, Inc.
CMMs and GD&T Dr. Henrik S. Nielsen HN Metrology Consulting, Inc. 10219 Coral Reef Way, Indianapolis, IN 46256 Phone: (317) 849 9577 Fax: (317) 849 9578 E-mail: hsnielsen@hn-metrology.com Web: http://www.hn-metrology.com
More informationHOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services
HOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services Abstract Reviewing a CETOL 6σ analysis requires a comprehensive understanding of the assembly being studied and the capabilities
More informationStacked Blocks Tutorial
For ME 577 Written by Michael Tonks 2 TABLE OF CONTENTS 1. Analysis Preparation... 3 START UP PROGRAMS:... 3 OPEN STACKED BLOCKS ASSEMBLY:... 3 2. Parametric Tolerance Analysis... 3 DEFINE DESIGN SPECIFICATION:...
More informationOptimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE
Movoline In-Process Metrology Optimum control of the grinding process thanks to reliable in-process measurement. SHARING EXCELLENCE Industrial Metrology Your partner for measuring solutions We deliver
More informationA Conceptual Data Model of Datum Systems
[J. Res. Natl. Inst. Stand. Technol. 104, 349 (1999)] A Conceptual Data Model of Datum Systems Volume 104 Number 4 July August 1999 Michael R. McCaleb National Institute of Standards and Technology, Gaithersburg,
More informationWhat s New In SA CHAPTER
What s New In SA CHAPTER 2 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity
More informationCreo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling
Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...
More informationArc Radius Measuring Gauge
Arc Radius Measuring Gauge Inverted Measuring Gauge Optical Flats Dial Center Finder Bore Gauge Checkmaster Optical Parallel Flats For checking the parallelism & flatness of seals, mating and gages surface.
More informationApplications beyond concept modeling and general prototyping have stringent demands for qualifying a process
By Jesse Hanssen, Stratasys Applications beyond concept modeling and general prototyping have stringent demands for qualifying a process capabilities. For advanced prototyping, analysis and the growing
More informationGETTING YOUR DIGITAL HOUSE IN ORDER
GETTING YOUR DIGITAL HOUSE IN ORDER STREAMLINING THE MBD AND DETAILING PROCESS WITH CREO Martin Neumüller Creo Product Management PTC Eindhoven, 2017 AGENDA 1. MBD opportunities and challenges 2. Creo
More informationQuality Procedure QP159 General Requirements for Machined Parts
1. PURPOSE 1.1. This procedure provides general product fabrication requirements. It also provides interpretation of certain requirements specified on product drawings, models, and electronic files. 2.
More informationStarting a 3D Modeling Part File
1 How to Create a 3D Model and Corresponding 2D Drawing with Dimensions, GDT (Geometric Dimensioning and Tolerance) Symbols and Title Block in SolidWorks 2013-2014 By Edward Locke This tutorial will introduce
More informationSYSTEM OF LIMITS, FITS, TOLERANCES AND GAUGING
UNIT 2 SYSTEM OF LIMITS, FITS, TOLERANCES AND GAUGING Introduction Definition of limits Need for limit system Tolerance Tolerance dimensions ( system of writing tolerance) Relationship between Tolerance
More informationTHE CUSTOM TOOLING PROCESS AT LOWELL, INC.
WHITE PAPER THE CUSTOM TOOLING PROCESS AT LOWELL, INC. www.lowellinc.com LOWELL S CUSTOM TOOLING PROCESS AND PRECISION GD&T Lowell Inc. of Minneapolis, MN uses CNC machines to make hundreds of different
More informationCNC Mill Setup
Western Technical College 31420326 CNC Mill Setup Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 The setup of CNC (Computer
More informationWorkpiece drawing factors. Size Shape Composition Dimensions Specifications
ITCD 301-001 Workpiece drawing factors Size Shape Composition Dimensions Specifications Tolerance Total amount of dimensional variation Designer specifies an unattainable condition Designer specifies a
More informationE M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM
E M P O W E R I N G S H O P P E R F O R M A N C E JETTOOLS.COM This new Jet ZX CNC lathe takes the best features of our top line manual lathes and adapts the Anilam 4200T CNC system to control the various
More informationCreo Revolve Tutorial
Creo Revolve Tutorial Setup 1. Open Creo Parametric Note: Refer back to the Creo Extrude Tutorial for references and screen shots of the Creo layout 2. Set Working Directory a. From the Model Tree navigate
More informationPro/E WILDFIRE, week6
Pro/E WILDFIRE, week6 1. Set working directory 2. File>New>Name is lbrack 3. When you create the part, make sure that the back surface of the vertical plate is on the front datum plane, and the lower surface
More informationThe State of Georgia Small Business
The State of Georgia Small Business 2011 Table of Contents GEORGIA SMALL BUSINESS FACTS Georgia Small Businesses...3 Women-Owned Businesses...3 Minority-Owned Businesses...3 Firms and Employment in Georgia...3
More informationASME Geometric Dimensioning and Tolerancing Professional Certification Applicant Information Handbook
GO.ASME.ORG/GDTP ASME Geometric Dimensioning and Tolerancing Professional Certification Applicant Information Handbook The American Society of Mechanical Engineers ASME STATEMENT OF POLICY ON THE USE OF
More informationIdentical Twins: George T. Shaheen, Management Consultant and Executive and Gerald L. Shaheen, Executive
Identical Twins: George T. Shaheen, Management Consultant and Executive and Gerald L. Shaheen, Executive I. George: Business Achievements II. III. IV. Jerry: Business Achievements Family The Brothers Shaheen/Grade/High
More informationProduct Information Report Maximizing Drill Bit Performance
Overview Drills perform three functions when making a hole: Forming the chip The drill point digs into the material and pushes up a piece of it. Cutting the chip The cutting lips take the formed chip away
More information5. Extruder Assembly
5. Extruder Assembly Guide for the assembly of the Extruder. Written By: Josef Prusa 2017 manual.prusa3d.com Page 1 of 22 Step 1 Get the necessary tools 2.5 and 1.5 mm Allen key Needle-nose pliers Step
More informationlooking west looking east A0.6 Proposed Development Model Shots 1327 Marine Drive West Vancouver revision date fax (604) phone (604)
THIS DRAWING IS THE EXCLUSIVE PROPERTY OF THE ARCHITECTS AND CAN BE REPRODUCED ONLY WITH THE PERMISSION OF THE ARCHITECTS, IN WHICH CASE THE REPRODUCTION MUST BEAR THEIR NAME AS ARCHITECTS. fax (604) 926-1059
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationN.A. Woodworth. Universal Ball-Lok (UBL) Chuck. The Original. Workholding Worldwide
N.A. Woodworth Workholding Worldwide The Original Universal Ball-Lok (UBL) Chuck Universal Ball-Lok (UBL) Chuck N.A. Woodworth s comprehensive line of workholding begins with the UBL. It is The Original
More informationJohn Deere 6300 Combine Header Manual READ ONLINE
John Deere 6300 Combine Header Manual READ ONLINE Combine Headers - AG-POWER - Premier John Deere - Combine Headers John Deere header equipment is specifically designed to utilize the capacity of the 70
More informationHighly accurate on each field. For all vehicles and implements PSR GUIDANCE SYSTEMS
Highly accurate on each field For all vehicles and implements PSR GUIDANCE SYSTEMS PSR the right solution for automatic guidance of tractors and implements RTK CLUE the key to costefficient RTK corrections
More informationRevit Structure 2013 Basics
Revit Structure 2013 Basics Framing and Documentation Elise Moss Supplemental Files SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com Tutorial
More informationSoftware Validation Considerations within Medical Companies per FDA 21 CFR PART 11
Greg Hetland, Ph.D. International Institute of GD&T Software Validation Considerations within Medical Companies per FDA 21 CFR PART 11 One critical challenge facing today s medical OEMs and suppliers is
More informationRevit Structure 2014 Basics
Revit Structure 2014 Basics Framing and Documentation Elise Moss Authorized Author SDC P U B L I C AT I O N S Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationMovoline. In-Process Metrology
Movoline In-Process Metrology Industrial Metrology Your partner for measuring solutions We deliver solutions that help you optimize your manufacturing process regarding qualitative and economic objectives.
More informationEvaluation Instructions Machining Level II Milling: Precision Locations
Evaluation Instructions Machining Level II Milling: Precision Locations General Instructions 1. Make sure that the candidate has his/her own copy of the part print, job instructions and understands the
More informationComplements and Enhancements of Position Tolerance for Axis and Derived Line Imposed by ISO Standards
Complements and Enhancements of Position Tolerance for Axis and Derived Line Imposed by ISO Standards Yiqing Yan1 and Martin Bohn2 Dimensional Management, Research & Development, Mercedes-Benz Cars, Daimler
More informationThe Intersection of Art and Precision (Using a Caliper), version 4
The Intersection of Art and Precision (Using a Caliper), version 4 By R. G. Sparber Copyleft protects this document 1. Introduction It may come as a surprise and maybe even a disappointment to learn that
More informationInventor-Parts-Tutorial By: Dor Ashur
Inventor-Parts-Tutorial By: Dor Ashur For Assignment: http://www.maelabs.ucsd.edu/mae3/assignments/cad/inventor_parts.pdf Open Autodesk Inventor: Start-> All Programs -> Autodesk -> Autodesk Inventor 2010
More information