Geometric Dimensioning and Tolerancing
|
|
- Gerald Randolf Chandler
- 5 years ago
- Views:
Transcription
1 Geometric Dimensioning and Tolerancing (Known as GDT) What is GDT Helps ensure interchangeability of parts. Use is dictated by function and relationship of the part feature. It does not take the place of conventional tolerancing. ASME GD &T Standards ASME Y14.5 Dimensioning and Tolerancing ASME Y Mathematical Definition of Dimensioning and Tolerancing Principles ASME Y Certification of Geometric Dimensioning and Tolerancing Professionals ASME Y14.31 Undimensioned Drawings ASME Y14.43 Dimensioning and Tolerancing Principles for Gages and Fixtures ASME Y14.1 Decimal Inch Drawing Sheet Size and Format ASME Y14.1M Metric Drawing Sheet Size and Format GD&T Symbols Five basic types: - Dimensioning symbols - Datum feature and datum target symbols - Geometric characteristic symbols - Material condition symbols - Feature control frame Drawn according to specific ASME Y14.5 format - Size based on drawing lettering height (typically.12 in. or 3 mm) - Draw using thin lines (.01 in. or 0.3 mm thick) Datum s Reference features of an object - Planes - Points - Lines - Axes The true geometric counterpart of a datum feature Establish location and size dimensions
2 Datum Feature Simulators The opposite shape of the datum feature Two types: - Theoretical datum feature simulator - Physical datum feature simulator Manufacturing examples: - Machine tables - Surface plates - Gauge surfaces - Surface tables - Rotation devices Datum Feature Symbol Drawn using thin lines Symbol size relates to the drawing lettering height Identify each datum feature with a different letter except I, O, and Q Not applied to centerlines, center planes, or axes
3 Datum Feature
4 Datum Feature Symbol Placement
5 Datum Surface Can be controlled by a geometric tolerance Measurements taken from a datum plane do not take into account any variations of the datum surface from the datum plane Geometric Control of Datum Surface Datum Reference Frame (DRF) Used for layout purposes Select three datum features that are perpendicular to each other Assign precedence and datum reference order: - Primary datum - Secondary datum - Tertiary datum
6 All parts have six degrees of freedom - Three degrees of translation - Three degrees of rotation Movement is translational or rotational Multiple Datum Reference Frames; Example Datum reference X, Y, and Z Datum reference L and M
7 Datum Features Specified Individually Place a note next to datum feature symbols indicating how many datum features to consider separately. Place the note 2X INDIVIDUALLY next to datum feature symbols of two separate datum features identified by same letter. Using Datum Target Symbols Identify datum targets Useful on parts with surface or contour irregularities Connect to datum target point, line, or area with a leader Drawn using thin lines Movable datum target Establishing Datum Target Points Establish primary datum plane by locating at least three points on primary datum Surface. Establish secondary datum plane by locating at least two points on related secondary datum surface. Establish tertiary datum plane by locating at least one point on related tertiary datum Surface. Dimension using baseline or chain dimensioning. Location dimensions originate from datums. Locating Datum Target Points Use basic dimensions or tolerance dimensions.
8 Locating Datum Target Areas Locating Datum Target Lines
9 Establishing a Partial Datum Surface Establishing Coplanar Datum Surfaces Surfaces treated as a single, interrupted surface Continuous feature symbol, or Note below the related feature control frame \
10 Establishing Coplanar Datum Surfaces (con) Establishing a Datum Axis A cylindrical object can be a datum feature. Represents two theoretical planes intersecting at 90. Represented in drawings with centerlines. Pitch cylinder for screw threads establishes datum axis unless otherwise specified - When not using pitch cylinder for screw threads, place note such as "MAJOR DIA" or "MINOR DIA" next to datum feature symbol Simulated datum axis established by inspection equipment
11 Establishing a Datum Axis Illustrated Datum Feature Symbol Placement for a Datum Axis
12 Coaxial Datum Features A single datum axis is established by two datum features that are coaxial Datum Axis established with Datum Target Symbols Primary datum axis established by two sets of three equally spaced targets. Identify datum target points in correlation to adjacent cylindrical datum feature when two cylindrical features of different diameters establish a datum axis. Cylindrical datum target areas and circular datum target lines can be used to establish datum axis - Target area represented by two phantom lines with section lines between - Datum target line represented by phantom line all around part Establish secondary datum axis by placing three equally spaced targets on cylindrical Surface. Movable Datum Target Symbols with Datum Target Points When datum targets establish a center point, axis, or center plane on a RMB basis, datum feature simulator movement is normal to true profile.
13 Establishing a Datum Center Plane Axis and center plane datum feature symbols align with/replace dimension line arrowhead or appear on feature, leader shoulder, dimension line, or feature control frame. Material Condition and Boundary Symbols Appear with geometric tolerance or datum reference in feature control frame Modify geometric tolerance in relationship to actual produced size of feature Regardless of feature size (RFS) and regardless of material boundary (RMB) are assumed.
14 Limits of Size Application Perfect Form Boundary Parts produced at MMC must be at perfect form. For a part at LMC, form tolerance can vary within geometric tolerance zone to extent of MMC boundary. Independency symbol specifies that perfect form at MMC is not required.
15 Regardless of Feature Size (RFS) and Material Boundary (RMB) Assumed when no material condition or boundary condition symbol is specified - RFS applies with respect to individual geometric tolerance - RMB applies to datum reference Circularity, cylindricity, profile, circular runout, total runout, concentricity, and symmetry are applied only on an RFS basis Tolerance specified using RFS is held at any produced size within specified dimensional tolerance Surface Geometric Control, Regardless of Feature Size (RFS) RFS is implied if MMC or LMC is not specified. Surface control is not associated with a size dimension. Each longitudinal element of the surface must lie between two parallel lines of the geometric tolerance zone. Perfect form boundary example: Diameter symbol in front of the geometric tolerance in the feature control frame specifies diameter tolerance zone. Applying Maximum Material Condition (MMC) Indicated maximum amount of material for feature - Maximum shaft diameter - Minimum hole diameter Specified geometric tolerance is held only at MMC produced size External feature formula: - MMC Produced Size + Given Geometric Tolerance = Applied Geometric Tolerance Internal feature formula: - (Produced Size MMC) + Given Geometric Tolerance = Applied Geometric Tolerance Axis Control, Maximum Material Condition (MMC)
16 Applying Least Material Condition (LMC) Indicates least amount of material for feature. - Minimum shaft diameter - Maximum hole diameter Given geometric tolerance is held at LMC produced size. No requirement for feature to maintain perfect form when produced at the LMC size limit. External feature formula: - Produced Size LMC + Given Geometric Tolerance = Applied Geometric Tolerance Internal feature formula: - LMC Produced Size + Given Geometric Tolerance = Applied Geometric Tolerance Application of RMB on Primary Datum Feature RMB is implied for datum features influenced by size and form variations unless otherwise specified. When a datum feature has a size dimension and form tolerance, size of simulated datum is MMB size limit. - Boundary can exceed MMB when axis straightness is specified. For a datum feature of size, establish datum by contact between datum feature surface and surface of processing equipment. Simulated datum is axis of datum feature simulator. - External feature: Smallest circumscribed perfect cylinder that contacts datum feature surface - Internal feature: Largest inscribed perfect cylinder that contacts datum feature surface
17 Application of RMB on a Primary Datum Center Plane Simulated datum is center plane of datum feature simulator. - External feature: Two parallel planes that contact datum feature surface at minimum separation. - Internal feature: Two parallel planes at maximum separation. Application of RMB on a Secondary and Tertiary Datum Feature Secondary - Contacting datum Use same guidelines for primary datum axis or center plane except: feature simulator is 90, or another design angle, to primary datum, which is usually an adjacent plane Tertiary - Use same guidelines for secondary datum axis or center plane except: Contacting datum feature simulator is 90, or another design angle, to primary and secondary datums The Effect of Datum Precedence and Material Condition Closely examine effect of material condition on datum when assigning precedence. - Changes in precedence alter part fit and function Consider options available when specifying datum requirements
18 Geometric Characteristic Symbols Provide specific controls related to the: - Form of an object - Orientation of features - Outlines of features - Relationship of features to an axis - Location of features The Feature Control Frame Symbol Feature Control Frame with Datum Reference
19 Form Tolerances Applied to single features or elements of single features. Not related to datum s. Used to control: - Straightness - Flatness - Circularity - Cylindricity Straightness Tolerance Applied to control surface or axis straightness. Surface Straightness Tolerance Feature cannot exceed MMC envelope and must maintain perfect form if actual size is produced at MMC. Otherwise, RFS applies and geometric tolerance remains the same at any produced size.
20 Axis Straightness Place feature control frame below diameter dimension. Place diameter symbol in front of geometric tolerance. Allows a violation of perfect form at MMC. RFS assumed. Axis Straightness at MMC Place MMC symbol after the geometric tolerance. Specified geometric tolerance held at MMC and can increase as actual size departs from MMC. Acceptance boundary can be used as a functional gage to verify the part. Local size is also verified. Unit Straightness Specifies straightness per unit. Prevents an abrupt surface variation within a relatively short length of the feature. Tolerance over total length is greater than unit tolerance. Per unit specification given per inch or per 25 mm of length Derived axis or centerline of the actual feature lies within a cylindrical tolerance zone for: - Total length - Any 25 mm length, RFS Straightness of Non-cylindrical Features Controls median plane of the part within specified straightness tolerance. Use a leader or extension line to attach feature control frame to surface in a view where the surface appears as a line. - Do not place diameter symbol in front of geometric tolerance. Apply straightness of a rectangular part at RFS or MMC Generally appropriate for thin features Straightness of a Flat Surface Straightness geometric tolerance controls single line elements on surface in one or two directions. Determine tolerance zone direction by feature control frame placement. Straightness of a Limited Length Apply straightness to a portion of a long part using a chain line next to view at desired straightness length. - Dimension length of chain line. - Connect feature control frame to chain line with a leader. Apply to a cylindrical or flat part.
21 Flatness Tolerance Establishes flatness tolerance zone. - Always considered RFS when applied to a surface. Flatness Applied to a Size Dimension In a typical application, derived median plane of feature lies within two parallel planes spaced equal to specified flatness geometric tolerance. Apply geometric tolerance at RFS or MMC. Specific Area Flatness Use when a large cast surface must be flat in relatively small area. - Machine only required area Outline specific area with phantom lines - Add section lines within area Locate specific area from datum s with basic or ± dimensions. Connect feature control frame to area with leader line. Unit Flatness Use alone or in combination with a total tolerance. Most applications use unit flatness with a total tolerance over entire surface so the unit callout does not become unmanageable. Unit tolerance must be smaller than total tolerance. Specify unit flatness using a square, rectangular, or circular unit area. Circularity Tolerance Establish from periphery, shaft circumference, or inside diameter of a hole. Does not reference a datum and is always RFS. Must be less than size tolerance. Feature control frame connects to the view where the feature appears as a circle or in the longitudinal view.
22 Circularity Tolerance (con) Circularity Tolerance for a Sphere Established by two concentric circles created by a plane passing through the sphere s center. All points on surface must lie within circularity tolerance zone. Free State Variation Applied to Circularity Typical in non-rigid parts. Circularity specification of a nonrigid part can be based on average diameter. - Place free state symbol in feature control frame after geometric tolerance and material condition symbol - Place AVG after size dimension Cylindricity Tolerance Form tolerance not referenced to a datum. Geometric tolerance must be less than size tolerance. Always RFS. Composite control of circularity, straightness, and taper.
23 Orientation Geometric Tolerances Use to establish total control of feature relationships: - Parallelism - Perpendicularity - Angularity - Profile (in some cases) Orientation Tolerances Controlled feature relates to one or more datum features. EACH ELEMENT or EACH RADIAL ELEMENT note allows for control of individual surface elements. When tolerance is applied to a plane surface, flatness is controlled to the extent of the orientation tolerance. RFS is implied. Surface Parallelism Requires parallelism geometric tolerance. Actual surface must be within parallelism tolerance zone established by two planes parallel to the datum. Parallelism tolerance zone must be within specified size limits. Tangent Plane Additional requirement applied to a surface control. Symbol placed after geometric tolerance in feature control frame. Actual surface can be outside parallelism geometric tolerance zone. Tangent plane must be within parallelism geometric tolerance zone.
24 Axis Parallelism Applied for a feature axis by establishing two parallel planes parallel to a datum plane between which the axis must lie. Parallelism tolerance zone must be within specified location tolerance. Feature control frame appears with diameter dimension. Diameter dimension associates the related geometric tolerance with feature axis. RFS is assumed. Can be applied to the axes of two or more features. Axis of feature must lie within cylindrical tolerance zone parallel to datum axis - Diameter tolerance zone. RFS assumed unless applying MMC or LMC Parallelism of Line and Radial Elements Place note EACH ELEMENT below feature control frame to control only individual line Elements. - Only controls elements in a plane parallel to view in which the tolerance is given. Place note EACH RADIAL ELEMENT under feature control frame to control parallelism for individual line elements on a radial surface.
25 Perpendicularity of a Surface Requires perpendicularity tolerance. Always RFS. Requires datum reference. Surface can be held perpendicular to one datum plane or two datum planes - Surface held perpendicular to two datum planes is between two parallel planes perpendicular to two datum planes. - Feature control frame references both datum s. Perpendicularity of an Axis Established by two parallel planes perpendicular to a datum plane or axis within which the axis feature must lie. Place feature control frame below diameter dimension. Only applies in view where dimension is shown. RFS implied unless applying MMC or LMC. Apply cylindrical perpendicularity tolerance zone by placing diameter symbol in front of geometric tolerance in feature control frame. Perpendicularity of a Center Plane Specifies symmetrical feature as perpendicular to datum plane. - Feature center plane held within two parallel planes that are perpendicular to a datum plane. - Center plane must be within the specified location tolerance. Perpendicularity of Line Elements and Radial Elements When controlling individual line elements of a surface, use note: - EACH ELEMENT below feature control frame When controlling individual line elements of a radial surface, use note: - EACH RADIAL ELEMENT under feature control frame
26 Combining Parallelism and Perpendicularity Allows versatility by providing uniform parallelism and perpendicularity to related datums. Tolerance zones are different or same. Stack feature control frames to provide feature control frame compartment for each geometric tolerance. Angularity Tolerance Angle must be basic from the datum plane. RFS implied unless otherwise specified. Angularity of an Axis Can be used to control feature axis between two parallel planes. - Planes are spaced equally on each side of specified basic angle from datum plane or axis. - Axis of feature must lie within this zone. - Only applies to view where specified. - Feature control frame appears next to feature diameter dimension to specify axis control. Can be used to control feature axis within a cylindrical angularity tolerance zone. - Place diameter symbol in front of geometric tolerance in feature control frame. - Specifies cylindrical tolerance zone. Angularity of a Center Plane and Single Element Control Angularity tolerance formed by two parallel planes at specified basic angle to datum plane. Center plane of feature must lie within this zone. Used for single line element or single radial element control. - Place note EACH ELEMENT or EACH RADIAL ELEMENT below feature control frame.
27 Applying Zero Orientation Tolerance at MMC Can be used for parallelism, perpendicularity, or angularity. Feature has perfect orientation at MMC. Location Tolerancing Uses location tolerances. - Positional tolerance - Concentricity tolerance - Symmetry tolerance Positional Tolerancing Used to establish location of features from true position. Provides benefits over conventional methods. Include diameter symbol when applied to a cylindrical tolerance zone. - Add compartments for datum reference - MMC or LMC symbol appears after tolerance - Assume RFS or RMB unless MMB or LMB symbol follows specified datum reference Establishes cylindrical tolerance zone when applied to a cylindrical feature. When applied to a noncylindrical feature, tolerance value represents distance between two parallel straight lines or planes or distance between two uniform boundaries. Comparing Conventional Tolerancing and Positional Tolerancing Conventional tolerancing establishes surface tolerance zone. - Uses ± or limit location dimensions. - Actual hole center is anywhere within the square area. - Diagonal of zone is greatest distance that allows variation in center location. - Diagonal becomes diameter tolerance zone cylindrical through thickness of part. Positional tolerancing provides increase of 54% in permissible area for the hole location Use guidelines when converting a drawing from conventional tolerancing - Add datums - Change location dimensions from ± to basic - Add feature control frame to diameter dimension Positional Tolerance Zone Hole axis at true position Positional tolerance at MMC
28 Positional Tolerance Zone (con) Hole axis at extreme positional variation. Positional tolerance at MMC. Positional tolerance at MMC. Hole axis at extreme attitude variation. Positional tolerance at MMC. Hole axis at true position Positional tolerance at LMC
29 Positional Tolerance at MMC Tolerance increases equal to amount of change from MMC. Maximum positional tolerance occurs at LMC. Internal feature formula: - Actual Size MMC + Specified Positional Tolerance = Applied Positional Tolerance. External feature formula: - MMC Actual Size + Specified Positional Tolerance = Applied Positional Tolerance. Introduction to Virtual Condition Internal feature: - MMC OF FEATURE RELATED GEOMETRIC TOLERANCE = VIRTUAL CONDITION. External feature: - MMC OF FEATURE + RELATED GEOMETRIC TOLERANCE = VIRTUAL CONDITION. Positional Tolerance Based on the Surface of a Hole All elements of hole surface must be outside a theoretical boundary located at true position and produced within specified size limits. Zero Positional Tolerancing at MMC Allows positional tolerance zone to exceed amount specified when feature is produced at any actual size other than MMC. Specifies importance of certainty that tolerance is totally dependent on actual size of feature. True position required at MMC. Positional tolerance increases equal to amount of departure as feature size departs from MMC. Total allowable variation in positional tolerance is at LMC. Positional Tolerance at RFS Assume RFS when no material condition symbol appears after positional tolerance. Apply RFS to positional tolerance when it is desirable to maintain given positional tolerance at any produced size. - RFS requires closer control of features. Used to control relationship of feature surface and true position of largest hole size. Sometimes controls minimum edge distance or minimum wall thickness. Positional tolerance held at LMC. Positional tolerance increases equal to amount of change from LMC as produced size departs from LMC toward MMC. Maximum positional tolerance is at MMC. Requires perfect form at LMC.
30 Calculating Positional Tolerance at LMC Internal feature: - LMC Actual Size + Specified Positional Tolerance = Applied Positional Tolerance External feature: - Actual Size LMC + Specified Positional Tolerance = Applied Positional Tolerance Locating Multiple Features Use rectangular coordinate dimensioning in positional tolerancing applications Use polar coordinate dimensioning to establish angular dimensions in positional tolerancing applications.
31 Locating a Single Composite Pattern Location dimensions are basic from datum reference frame. All holes checked together. Locating Features in Patterns with Separate Requirements Used when a multiple datum reference frame exists and features are positioned to different datum s individually. Place note next to datum feature symbols and related feature control frame identifying how many datum features and position tolerance specifications to consider individually. - Example: 2X INDIVIDUALLY Composite Positional Tolerance Double the feature control frame in height and divide into two parts. - Use one positional geometric characteristic symbol in one double height feature control frame compartment. - Specify pattern-locating control in upper part of feature control frame. - Specify feature-relating control in lower entry.
32 Composite Positional Tolerance (con) Two Single-Segment Feature Control Frames Display two position symbols, each in a separate compartment. - Specify pattern-locating control in top half of feature control frame. - Single datum reference in lower half of feature control frame provides orientation. - Double datum reference provides orientation and alignment for feature-relating control. Offers tighter relationship of holes within pattern. Pattern-locating zones and feature-relating zones must remain same distance from secondary datum.
33 Two Single-Segment Feature Control Frames (con) Composite Positional Tolerancing Applied To Circular Patterns Pattern-locating zones located using a basic diameter and basic angle between features. - Oriented to specified datum reference frame Feature-relating zones located partially or totally within boundaries of pattern-locating Zones. - Held perpendicular to primary datum - Controlled as group by basic dimensions - Feature axes must fall within both zones.
34 Composite Positional Tolerancing Applied To Circular Patterns (con) Two Single-Segment Tolerance Applied to Circular Patterns Top half of feature control frame controls location of features as a group to the datum s. Add slot and tertiary datum to pattern-locating control to provide orientation of the pattern of holes. Lower portion of feature control frame controls pattern of features related to each other.
35 Two Single-Segment Tolerance Applied to Circular Patterns (con) Material Condition Requirements In Composite Positional Tolerancing Composite and two single-segment feature control frames must have same material condition. Datum s must be in same order of precedence with same boundary condition.
36 Position Tolerancing of Coaxial Features Used for features with a common axis. - Holes and counterbores. When tolerance is same for both features, positional tolerance zone diameter is same for both features relative to specified datum s. Feature control frame appears below note to specify hole and counterbore. When different tolerances are applied to coaxial features related to the same datum features, separate feature control frames are used. - One feature control frame appears under note to specify hole size. - Another feature control frame appears under note to specify counterbore. When tolerances control individual counterbore-to-hole relationships relative to different datum features, an additional specification is required. - A note appears under the datum feature symbol for the hole and under the feature control frame for the counterbore to indicate number of places each applies on an individual basis Coaxial Positional Tolerance of Features in Alignment Used for holes lying apart and in alignment. Locate positional tolerance zone of holes by basic dimensions from referenced datum s. Each hole can be produced at any location within positional tolerance zone.
37 Position Tolerancing of Non-parallel Holes Locating Slotted Features Locate to centers with basic dimensions from datum s. When a greater positional tolerance is placed on the length than on the width, add a feature control frame to the length and width dimensions. Use a bidirectional positional tolerance for a greater location tolerance in one direction than the other direction. - Positional tolerance results in a rectangular tolerance zone. - Omit diameter symbol from the feature control frame. - Positional tolerance zone is non-cylindrical. When the positional tolerance is controlled in relation to the feature surfaces, each feature is controlled by a theoretical boundary. - Size of each slot is within size limits and no portion of surface can enter theoretical boundary. - Precede feature control frame with number of slots, such as 2X. Boundary formula: - MMC Length Positional Tolerance = Boundary Length - MMC Width Positional Tolerance = Boundary Width
38 Position Tolerancing of Spherical Features Spherical diameter symbol precedes feature size dimension. Feature control frame appears below size dimension and positional tolerance zone is spherical. Applying Positional Tolerancing to Fasteners Fasteners. Thread symbol represents thread on drawing. Thread note provides thread specifications. Unless otherwise specified, geometric tolerances apply to pitch diameter. Applying Positional Tolerancing to Fasteners (con) A: Location tolerance applies to the cylindrical axis of the pitch diameter. B: Location tolerance applies to the cylindrical axis of the major diameter, C: Location tolerance applies to the cylindrical axis of the minor diameter. Floating Fasteners Floating Fastener Positional Tolerance Formula: - MMC Hole - MMC Fastener (Bolt) = Positional Tolerance for Each Part.
39 Fixed Fasteners Fixed Fastener Positional Tolerance Formula: - MMC Hole MMC Fastener (Bolt) / 2 = Positional Tolerance for Each Part Fixed Fastener with Different Positional Tolerances Applied to Each Part A greater amount of positional tolerance can apply to unthreaded part. Example: 70% applied to the unthreaded part and 30% to the threaded part. Use the formula: - MMC Hole MMC Bolt = x x 70% (.70) = Positional Tolerance for Part A x 30% (.30) = Positional Tolerance for Part B Applying a Projected Tolerance Zone Usually specified for fixed fastener applications. Length is distance fastener extends into the mating part, thickness of the part, or height of a press-fit stud. Perpendicularity tolerance provides a tighter control than allowed by a positional tolerance.
40 Projected Tolerance Zone Representation First Option Projected Tolerance Zone Representation Second Option
41 Virtual Condition Determine when designing mating parts. Violating virtual condition risks the interchangeability of mating parts. Virtual condition of a feature must be interchangeable with virtual condition of its mating part. Calculating Virtual Condition Internal Feature Formula: - MMC SIZE OF THE FEATURE RELATED GEOMETRIC TOLERANCE = VIRTUAL CONDITION External Feature Formula: - MMC SIZE OF THE FEATURE + RELATED GEOMETRIC TOLERANCE = VIRTUAL CONDITION Zero Positional Tolerance at MMC with the Clearance Hole at Virtual Condition
42 Concentricity Geometric Tolerance Establishes concentricity. Specifies a cylindrical tolerance zone. Axis of tolerance zone coincides with datum axis. Specifies that median points originating from feature surface must be within cylindrical concentricity tolerance zone. Applied only on an RFS basis. Related datum reference applied only on an RMB basis. Concentricity Geometric Tolerance Form irregularities of an actual feature can make it difficult to establish location of median points. - Finding median points requires analysis of surface variations. - Use runout or positional tolerancing unless it is absolutely necessary to control median points.
43 Symmetry Geometric Tolerance Applied only on an RFS basis. Related datum reference applied only on an RMB basis. Presents difficulty in inspecting median points. Consider positional tolerance locating symmetrical features if symmetry is not required. Positional Tolerancing Locating Symmetrical Features Establishes a center plane-to-center plane control. Use to locate one or more features symmetrically with respect to center plane of datum feature. Omit diameter symbol in feature control frame. Positional tolerance zone is distance between two parallel planes equally divided on each side of true position. Material condition must accompany positional tolerance. - RFS assumed otherwise.
44 Zero Positional Tolerance at MMC for Symmetrical Objects Use to control symmetry relationship of features within their limits of size. Datum feature usually specified on MMB basis. Perfect symmetry occurs and a boundary of perfect form is established when positional controlled feature is at MMC and datum feature is at MMB. Out-of-perfect symmetry only happens as produced size leaves MMC. Applying Profile Tolerances Profile can be used to control form or combinations of size, form, and orientation. Based on true profile. Must be contained within size tolerance when used as a refinement of size. Always RFS. Equally disposed bilateral unless otherwise specified. Profile geometric tolerance zone is generally oriented to one or more datum s. Profile of a Line Tolerance Used when it is unnecessary to control profile of the entire feature. Used when parts have changing cross sections throughout length. Assumed to be equally disposed bilateral when leader from feature control frame extends to related surface without any additional clarification. Profile of a Line between Two Points Place the between symbol under feature control frame. Use any combination of letters. Establish true profile with a basic or tolerance dimension. Equally disposed bilateral unless otherwise specified. Feature confined within profile tolerance zone.
45 Profile of a Line All Around Unilateral Profile of a Line Place the unequally disposed symbol after geometric tolerance in feature control frame. Repeat tolerance value after unequally disposed symbol when the tolerance has material added to feature or part.
46 Unilateral Profile of a Line (con) Place tolerance value before the unequally disposed symbol when the tolerance has material taken from the feature or part. Place a 0 after the unequally disposed symbol. Specifies entire profile tolerance is inside of true profile. Alternate Unilateral Profile Tolerance Option Draw a short phantom line parallel to the true profile on the side of the intended unilateral tolerance. Place a dimension line with an arrowhead on the far side and connect a leader line to feature control frame with a leader line on the other side. Unequally Disposed Profile of a Line Place total profile tolerance value before the unequally disposed symbol in feature control frame. Place value of tolerance that adds material to the feature or part after the unequally disposed symbol. Unequally Disposed Profile of a Line
47 Alternate Unequally Disposed Profile Tolerance Option Show either inside or outside of true profile as a basic dimension. Place a dimension line with arrowheads on each side of the phantom lines and connect feature control frame with a leader. Actual profile of part must be between the basic zone created around the true profile. Profile of a Surface Tolerance Use to control entire surface as a single feature. Extends along total length and width or circumference of object or feature(s) - Establishes a blanket tolerance. Equally disposed bilateral unless otherwise specified. Normally requires reference to datum s for proper orientation of profile. Profile of a Surface Between Two Points
48 Profile of a Surface All Around or All Over Establishes a blanket tolerance. Surfaces all around or all over object outline must lie between two parallel boundaries equal in width to given geometric tolerance. Tolerance zone should be perpendicular to datum plane. Profile of a Sharp Corner Tolerance zone extends to intersection of the boundary lines. A rounded corner can occur. Control using a maximum radius note. Unilateral or Unequally Disposed Profile of a Surface Coplanar Profile Tolerance Used to control profile of coplanar surfaces as a single surface. Place a phantom line between surfaces in the view where required surfaces appear as lines. Connect a leader from feature control frame to phantom line and add a note below feature control frame identifying the number of surfaces.
49 Profile of Plane Surfaces Used to control form and orientation of planar surfaces. Can be used to control the angle of an inclined surface in relationship to a datum. - Surface must lie between two parallel planes equally split on each side of a true plane that has a basic angular orientation to a datum. Profiles of Conical Features Controls form or form and orientation. Controls feature independently as a refinement of size or orients feature to a datum axis. Profile tolerance must be within the size tolerance. Actual surface must lie between two coaxial boundaries equal in width to the specified geometric tolerance, having a basic included angle, and within the size limits. Composite Profile Tolerance Double the feature control frame in height. Place geometric characteristic symbol in first compartment. Specify locating tolerance zone in top half of feature control frame. - Give datum reference in order of precedence in feature control frame - Locate feature to be controlled from datum s with basic dimensions Specify profile form and orientation tolerance zone in bottom half of feature control frame. - Datum referencing establishes limits of size, form, and orientation of profile related to locating tolerance zone Actual feature surface must be within both tolerance zones. Profile of a Feature to be Restrained Identify datum features. Provide a note specifying process used and force required to restrain the part. Runout Geometric Tolerance Used to control surfaces constructed around or perpendicular to a datum axis. - Control of circular elements of a surface. - Control of cumulative variations of circularity, straightness, coaxiality, angularity, taper, and profile of a surface. - Control of variations in perpendicularity and flatness. Always specified RFS. Datum references always specified RMB. Connect feature control frame to surface by a leader line. Use multiple leaders to direct a feature control frame to two or more surfaces having a common runout tolerance.
50 Circular Runout Controls circularity and coaxiality when applied to surfaces constructed around or perpendicular to a datum axis. Can be used to control wobbling motion. Controlling datum verified before checking other surfaces. Reference datum always RMB. Measured by full indicator movement (FIM) of a dial indicator placed at several circular measuring positions as part is rotated 360. FIM is a total tolerance. Each circular element must lie within the FIM. Establish datum axis for runout inspection using a clamping device - Collet typical.
51 Total Runout Controls combined variations of circularity, straightness, coaxiality, angularity, taper, and profile when applied to surfaces constructed around and at right angles to a datum axis. Can control combined variations of perpendicularity. Can control concavity or convexity when applied to surfaces perpendicular to a datum axis. Reference datums always RMB. Tolerance zone encompasses entire surface as part is rotated Entire surface must lie within specified tolerance zone. - Dial indicator is placed at every location along surface as part is rotated 360. Applying Runout to a Portion of a Surface and Two Datum References Place a chain line located with basic dimensions in linear view. - Connect feature control frame to chain line by a leader. Place datum identifying letters in feature control frame. Separate letters by a dash.
52 Applying Runout to a Datum Surface and a Datum Axis Place datums separately in feature control frame in order of precedence. Profile must be within specified geometric tolerance when part is mounted on the datum surface and rotated 360 about the datum axis. Datum reference always specified RMB. Applying Runout Control to a Datum Specify datum feature symbol to apply runout. Center datum feature symbol below feature control frame or connect datum feature symbol to the leader shoulder. Combining Runout with Other Geometric Tolerances Used in runout tolerancing applications. - Profile and circular runout. - Runout and cylindricity. Specify Independency Form control is independent of size tolerance and should be added to the feature. Size is verified by a two-point check using a micrometer or caliper. Form is checked using the runout tolerance.
Test Answers and Exam Booklet. Geometric Tolerancing
Test Answers and Exam Booklet Geometric Tolerancing iii Contents ANSWERS TO THE GEOMETRIC TOLERANCING TEST............. 1 Part 1. Questions Part 2. Calculations SAMPLE ANSWERS TO THE GEOMETRIC TOLERANCING
More informationCOMMON SYMBOLS/ ISO SYMBOL ASME Y14.5M ISO FEATURE CONTROL FRAME DIAMETER/ SPHERICAL DIAMETER/ AT MAXIMUM MATERIAL CONDITION
1 82 COMMON SYMBOLS/ Shown below are the most common symbols that are used with geometric tolerancing and other related dimensional requirements on engineering drawings. Note the comparison with the ISO
More informationGeometric Boundaries II
Geometric Boundaries II Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Inch and Metric Units) Based on ASME Y14.5-2009 (R2004) Written and Illustrated by Kelly L. Bramble
More informationAnswers to Questions and Problems
Fundamentals of Geometric Dimensioning and Tolerancing Using Critical Thinking Skills 3 rd Edition By Alex Krulikowski Answers to Questions and Problems Second Printing Product #: 1103 Price: $25.00 Copyright
More informationGeometric Tolerances & Dimensioning
Geometric Tolerances & Dimensioning MANUFACTURING PROCESSES - 2, IE-352 Ahmed M. El-Sherbeeny, PhD KING SAUD UNIVERSITY Spring - 2015 1 Content Overview Form tolerances Orientation tolerances Location
More informationGeometric Boundaries
Geometric Boundaries Interpretation and Application of Geometric Dimensioning and Tolerancing (Using the Customary Inch System) Based on ASME Y14.5M-1994 Written and Illustrated by Kelly L. Bramble Published
More informationEngineering & Design: Geometric Dimensioning
Section Contents NADCA No. Format Page Frequently Asked Questions -2 s e c t i o n 1 Introduction -2 2 What is GD&T? -2 3 Why Should GD&T be Used? -2 4 Datum Reference Frame -4 4.1 Primary, Secondary,
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration: 4 Days Training Course Content: Day 1: Tolerancing in Engineering Drawing (9:00am-10:00am) 1.0 Geometric Dimensioning
More informationINDEX. Datum feature symbol, 21
INDEX Actual Mating Envelope, 11 Actual Minimum Material Envelope, 11 All Around, 149 ALL OVER, 157, 158,363 Allowed vs. actual deviations from true position, 82 Angularity, 136 axis, 140 line elements,
More informationGEOMETRIC DIMENSIONING AND TOLERANCING (GD&T)
GEOMETRIC DIMENSIONING AND TOLERANCING (GD&T) Based on ASME Y14.5M-1994 Standard Duration : 4 days Time : 9:00am 5:00pm Methodology : Instructor led Presentation, exercises and discussion Target : Individuals
More informationAlessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus
Alessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus Sections: 1. Definitions 2. Material Conditions 3. Modifiers 4. Radius and Controlled Radius 5. Introduction to Geometric Tolerances
More informationIntroduction. Objectives
Introduction As more and more manufacturers become immersed in the global economy, standardization plays a critical role in their success. Geometric dimensioning and tolerancing (GD&T) provides a set of
More informationGeometric Dimensioning and Tolerancing
Geometric dimensioning and tolerancing (GDT) is Geometric Dimensioning and Tolerancing o a method of defining parts based on how they function, using standard ASME/ANSI symbols; o a system of specifying
More informationASME Y14.5M-1994 GD&T Certification Preparation Examination
ASME Y14.5M-1994 GD&T Certification Preparation Examination Directions: On the response sheet on the last page, fill in the circle of the letter which best completes the following statements. Do not write
More informationGD&T Reckoner Course reference material for. A Web-based learning system from.
GD&T Reckoner Course reference material for A Web-based learning system from This is not the complete document. Only Sample pages are included. The complete document is available to registered users of
More informationTerms The definitions of 16 critical terms defined by the 2009 standard 1
856 SALT LAKE COURT SAN JOSE, CA 95133 (408) 251 5329 Terms The definitions of 16 critical terms defined by the 2009 standard 1 The names and definitions of many GD&T terms have very specific meanings.
More informationME 114 Engineering Drawing II
ME 114 Engineering Drawing II FITS, TOLERANCES and SURFACE QUALITY MARKS Mechanical Engineering University of Gaziantep Dr. A. Tolga Bozdana Assistant Professor Tolerancing Tolerances are used to control
More informationAdvanced Dimensional Management LLC
Index: Mechanical Tolerance Stackup and Analysis Bryan R. Fischer Accuracy and precision 8-9 Advanced Dimensional Management 14, 21, 78, 118, 208, 251, 286, 329-366 Ambiguity 4, 8-14 ASME B89 48 ASME Y14.5M-1994
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationDRAFTING MANUAL. Dimensioning and Tolerancing Rules
Page 1 1.0 General This section is in accordance with ASME Y14.5-2009 Dimensioning and Tolerancing. Note that Rule #1 is the only rule that is numbered in the 2009 standard. All of the other rules fall
More informationAC : CLARIFICATIONS OF RULE 2 IN TEACHING GEOMETRIC DIMENSIONING AND TOLERANCING
AC 2007-337: CLARIFICATIONS OF RULE 2 IN TEACHING GEOMETRIC DIMENSIONING AND TOLERANCING Cheng Lin, Old Dominion University Alok Verma, Old Dominion University American Society for Engineering Education,
More informationChapter 2: Dimensioning Basic Topics Advanced Topics Exercises
Chapter 2: Dimensioning Basic Topics Advanced Topics Exercises Dimensioning: Basic Topics Summary 2-1) Detailed Drawings 2-2) Learning to Dimension 2-3) Dimension Appearance and Techniques. 2-4) Dimensioning
More informationFOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards
Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately
More informationTo help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD
To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and
More informationDavid A. Madsen. Faculty Emeritus
i Q eometric ' ' Dimensioning andtolerancing Ninth Edition Based on ASME Y14.5-2009 AWk A ejacy ofjejtccftence APPROVED PUBLICATION by David A. Madsen President, Madsen Designs Inc. www.madsendesigns.com
More informationGD&T - Profile Tolerancing
GD&T - Profile Tolerancing PMPA Technical Conference Rapid Response to Make the Cut Grand Rapids, MI April 11, 2016 Gary K. Griffith Corona, California Gary K. Griffith 48 Years Exp. Technical Book Author
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationGeometric dimensioning & tolerancing (Part 1) KCEC 1101
Geometric dimensioning & tolerancing (Part 1) KCEC 1101 Introduction Before an object can be built, complete information about both the size and shape of the object must be available. The exact shape of
More informationENGINEERING GRAPHICS ESSENTIALS. (A Text and Lecture Aid) Second Edition. Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS
ENGINEERING GRAPHICS ESSENTIALS (A Text and Lecture Aid) Second Edition Kirstie Plantenberg University of Detroit Mercy SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com
More informationISO 1101 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
INTERNATIONAL STANDARD ISO 1101 Third edition 2012-04-15 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Spécification géométrique
More informationSPECIFICATION
Rev. R SPECIFICATION 9-3800 Page 1 of 26 Amphenol Corporation Sidney, New York U TITLE STANDARD SPECIAL USE DESCRIPTION ENGINEERING DRAWING Revisions REV. LETTER ISSUE NUMBER ORIGINATOR DATE APPROVAL M
More informationA R C H I V E
A R C H I V E 2 0 0 6 Tutorial Geometric Dimensioning And Tolerancing: A Primer For The BiTS Professional Thomas Allsup Manager of Technology Anida Technologies COPYRIGHT NOTICE The papers in this publication
More informationContents. Notes on the use of this publication
Contents Preface xxiii Scope Notes on the use of this publication xxv xxvi 1 Layout of drawings 1 1.1 General 1 1.2 Drawing sheets 1 1.3 Title block 2 1.4 Borders and frames 2 1.5 Drawing formats 2 1.6
More informationDFTG-1305 Technical Drafting Prof. Francis Ha
DFTG-1305 Technical Drafting Prof. Francis Ha Session 5 Dimensioning Geisecke s textbook: 14 th Ed. Chapter 10 p. 362 15 th Ed. Chapter 11 p. 502 Update: 17-0508 Dimensioning Part 1 of 2 Dimensioning Summary
More informationProduct and Manufacturing Information (PMI)
Product and Manufacturing Information (PMI) 1 Yadav Virendrasingh Sureshnarayan, 2 R.K.Agrawal 1 Student of ME in Product Design and Development,YTCEM -Bhivpuri road-karjat, Maharastra 2 HOD Mechanical
More informationIntroduction to GD&T Session 2: Rules and Concepts of GD&T
Introduction to GD&T Session 2: Rules and Concepts of GD&T An exploration of the language known as Geometric Dimensioning and Tolerancing Instructor: John-Paul Belanger Review Benefits of GD&T The GD&T
More informationA Strategy for Tolerancing a Part 1
856 SLT LKE OURT SN JOSE, 95133 (408) 251 5329 Strategy for Tolerancing a Part 1 The first step in tolerancing a feature of size, such as the hole in Figure 14-1, is to specify the size and size tolerance
More informationProduct and Manufacturing Information(PMI)
Product and Manufacturing Information(PMI) Ravi Krishnan V 1 Post Graduate Student Department of Mechanical Engineering Veermata Jijabai Technological Institute Mumbai, India ravi.krishnan30@gmail.com
More informationGeometric Dimensioning & Tolerancing
Western Technical College 31420350 Geometric Dimensioning & Tolerancing Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Recognition
More information1 st Subject: Types and Conventions of Dimensions and Notes
Beginning Engineering Graphics 7 th Week Lecture Notes Instructor: Edward N. Locke Topic: Dimensions, Tolerances, Graphs and Charts 1 st Subject: Types and Conventions of Dimensions and Notes A. Definitions
More informationGEOMETRICAL TOLERANCING
GEOMETRICAL TOLERANCING Introduction In a typical engineering design and production environment, the designer of a part rarely follows the design to the shop floor, and consequently the only means of communication
More informationGeometric Tolerancing
Geometric Tolerancing Distorted Objects by Suzy Lelievre Scale Transform SALOME Geometry User s Guide: Scale Transform Baek-Ki-Kim-Twisted Stool Mesh Geometric Tolerancing What is it? Geometric Tolerancing
More informationthe same information given in two different 1. Dimensions should NOT be duplicated, or Dimension Guidelines Incorrect ways.
Dimension Guidelines 1. Dimensions should NOT be duplicated, or the same information given in two different ways. Incorrect 1. Dimensions should NOT be duplicated, or the same information given in two
More informationENVELOPE REQUIREMENT VERSUS PRINCIPLE OF INDEPENDENCY
ENVELOPE REQUIREMENT VERSUS PRINCIPLE OF INDEPENDENCY Carmen SIMION, Ioan BONDREA University "Lucian Blaga" of Sibiu, Faculty of Engineering Hermann Oberth, e-mail:carmen.simion@ulbsibiu.ro, ioan.bondrea@ulbsibiu.ro
More information6/23/2016 Copyright 2016 Society of Manufacturing Engineers
6/23/2016 Copyright 2016 Society of Manufacturing Engineers --- 1 --- GEOMETRIC DIMENSIONING & TOLERANCING FUNDAMENTALS Form Controls & Datums - GDT2 TRT: 25:44 Minutes SCENE 1. GDT01A, CGS: FBI warning
More informationEmpowering GD&T. Introduction. 1. Concepts
Empowering GD&T Copyright by Multi Metrics, Inc. 2017 All Rights Reserved Introduction The materials contained in this document represent an effort to clarify some of the most important concepts, tools
More informationMEMORANDUM REPORT ARCCB-MR GEOMETRIC DIMENSIONING AND TOLERANCING TO 1982 THE DIFFERENCES IN THE STANDARDS DAVID H.
AD MEMORANDUM REPORT ARCCB-MR-94040 GEOMETRIC DIMENSIONING AND TOLERANCING - 1946 TO 1982 THE DIFFERENCES IN THE STANDARDS DAVID H. HONSINGER OCTOBER 1994 US ARMY ARMAMENT RESEARCH, DEVELOPMENT AND ENGINEERING
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationGuide To British Standards
Guide To British Standards Higher Graphic Communication C O N T E N T S page TITLE BLOCK 2 DRAWING SCALES 2 LINE TYPES 3 ORTHOGRAPHIC PROJECTION 4 SECTIONAL VIEWS 4 SCREW THREADS & COMPONENTS 7 INTERUPTTED
More informationGeometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1101 Fourth edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
More informationQuality Procedure QP159 General Requirements for Machined Parts
1. PURPOSE 1.1. This procedure provides general product fabrication requirements. It also provides interpretation of certain requirements specified on product drawings, models, and electronic files. 2.
More informationME 410 Mechanical Engineering Systems Laboratory
ME 410 Mechanical Engineering Systems Laboratory Laboratory Lecture 1 GEOMETRIC TOLERANCING & SOURCES OF ERRORS Geometric dimensioning and tolerancing (GD&T) is a symbolic language used on engineering
More informationTECHNICAL DESIGN II (546)
DESCRIPTION The second in a sequence of courses that prepares individuals with an emphasis in developing technical knowledge and skills to develop working drawings in support of mechanical and industrial
More informationGaging Exploration (Applications)
Gaging Exploration (Applications) PMPA Technical Conference Tomorrow is Today - Conquering the Skills Challenge Chicago, IL April 24, 2018 Gary K. Griffith Corona, California Gary K. Griffith 50+ Years
More informationUNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS
UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS 5.1 Introduction Orthographic views are 2D images of a 3D object obtained by viewing it from different orthogonal directions. Six principal views are possible
More informationHow to Spell GD&T Part II: Revenge of the Circled Letters Thomas Allsup
How to Spell GD&T Part II: Revenge of the Circled Letters Thomas Allsup Return of the Jedi Originally to be titled "Revenge of the Jedi" but producers thought the Jedi wouldn't seek revenge. Some posters
More informationCopyright Warning & Restrictions
Copyright Warning & Restrictions The copyright law of the United States (Title 17, United States Code) governs the making of photocopies or other reproductions of copyrighted material. Under certain conditions
More informationConcentricity and Symmetry Controls
Concentricity and Symmetry Controls Alessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus Concentricity and Symmetry Controls Sections: 1. Concentricity Control 2. Symmetry Control
More informationDimensioning 2-4) Dimensioning and Locating Simple Features
Dimensioning 2-4) Dimensioning and Locating Simple Features Dimensioning Features a) A circle is dimensioned by its diameter and an arc by its radius using a leader line and a note. Exercise 2-6 Circular
More informationTolerancing Fixed Fasteners 1
+ 856 SALT LAKE COURT SAN JOSE, CA 951 (408) 251 529 Tolerancing Fixed Fasteners 1.274- Figure 8-5 Fixed fastener The fixed fastener in Fig. 8-5 is fixed by one or more of the members being fastened. The
More informationMultiviews and Auxiliary Views
Multiviews and Auxiliary Views Multiviews and Auxiliary Views Objectives Explain orthographic and multiview projection. Identifying the six principal views. Apply standard line practices to multiviews
More informationElementary Dimensioning
Elementary Dimensioning Standards Institutions ANSI - American National Standards Institute - creates the engineering standards for North America. ISO - International Organization for Standardization -
More informationVocabulary. Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size).
10-11-11 Vocabulary Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size). 10-12-11 Vocabulary Centerlines: Thin lines made up of long and short dashes
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationStudent Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 2. Description: Drafting 1 - Test 6.
Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 2 Description: Drafting 1 - Test 6 Form: 501 1. 2X on a hole note means: A. Double the size of the hole. B.
More information3. The dimensioning SYMBOLS for arcs and circles should be given:
Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 4.08 Dimensioning Form: 501 1. The MINIMUM amount of space between two, ADJACENT DIMENSION
More informationAC : TEACHING APPLIED MEASURING METHODS USING GD&T
AC 2008-903: TEACHING APPLIED MEASURING METHODS USING GD&T Ramesh Narang, Indiana University-Purdue University-Fort Wayne RAMESH V. NARANG is an Associate Professor of Industrial Engineering Technology
More informationContinuous thick. Continuous thin. Continuous thin straight with zigzags. Dashed thin line. Chain thin. Chain thin double dash
Types of line used Continuous thick Used for visible outlines and edges. Continuous thin Used for projection, dimensioning, leader lines, hatching and short centre lines. Continuous thin straight with
More informationTABLE OF CONTENTS DIMENSIONING, GAGING, AND MEASURING
TABLE OF CONTENTS DIMENSIONING, GAGING, AND MEASURING DRAFTING PRACTICES 606 Drafting Practices 606 Sizes of Drawing Sheets 606 Symbols for Section Lining 606 Geometric Dimensioning 609 ANSI and ISO Symbols
More informationGeometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out
INTERNATIONAL STANDARD ISO 1101 Fourth edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Spécification géométrique des
More informationMechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationC H A P T E R E L E V E N
DIMENSIONING C H A P T E R E L E V E N Giesecke, Hill, Spencer, Dygdon, Novak, Lockhart, Goodman 1 OBJECTIVES 1. Use conventional dimensioning techniques to describe size and shape accurately on an engineering
More informationDatum reference frame Position and shape tolerances Tolerance analysis
Datum reference frame Position and shape tolerances Tolerance analysis Šimon Kovář Datum reference frame Datum reference frames are typically for 3D. A typical datum reference frame is made up of three
More informationThe Author. 1 st Edition 2008 Self-published by Frenco GmbH
The Author Graduate Engineer (Dipl. Ing., FH) Rudolf Och was born in Bamberg, Germany in 1951. After graduating in mechanical engineering he founded FRENCO GmbH in Nuremberg, Germany in 1978. In the beginning,
More informationPattern Inspection with Variable Geometric Tolerance Limits
Pattern Inspection with Variable Geometric Limits From Disregarding to Fully Applying Variable Feature Bonus and Datum Shift s in a Pattern Inspection By Paul F. Jackson Variable Limit Specifications and
More informationTechnical drawings and their interpreta1on. ME Fall 2011 Eradat SJSU Based on notes on Jim Burge and other online resources
Technical drawings and their interpreta1on ME 297-1 Fall 2011 Eradat SJSU Based on notes on Jim Burge and other online resources Technical drawings Technical drawings Orthographic projec1on Isometric layout
More informationDIMENSIONING ENGINEERING DRAWINGS
DIMENSIONING ENGINEERING DRAWINGS An engineering drawing must be properly dimensioned in order to convey the designer s intent to the end user. Dimensions provide the information needed to specify the
More informationAC : CALCULATION OF TOLERANCE STACKS USING DIRECT-POSITION APPROACH IN GEOMETRIC DIMENSIONING AND TOLERANCING
AC 2009-138: CALCULATION OF TOLERANCE STACKS USING DIRECT-POSITION APPROACH IN GEOMETRIC DIMENSIONING AND TOLERANCING Cheng Lin, Old Dominion University American Society for Engineering Education, 2009
More informationA Conceptual Data Model of Datum Systems
[J. Res. Natl. Inst. Stand. Technol. 104, 349 (1999)] A Conceptual Data Model of Datum Systems Volume 104 Number 4 July August 1999 Michael R. McCaleb National Institute of Standards and Technology, Gaithersburg,
More informationMultiview Drawing. Definition: Graphical representation of a 3- dimensional object on one plane (sheet of paper) using two or more views.
Multiview Drawing Definition: Graphical representation of a 3- dimensional object on one plane (sheet of paper) using two or more views. Multiview Drawing Another name for multiview drawing is orthographic
More informationInvestment Casting Design Parameters Guide for Buyer
Investment Casting Design Parameters Guide for Buyer The following guidelines and technical information outline what an investment casting is capable of offering. It will cover dimensional and structural
More informationEngineering Graphics, Class 8 Orthographic Projection. Mohammad I. Kilani. Mechanical Engineering Department University of Jordan
Engineering Graphics, Class 8 Orthographic Projection Mohammad I. Kilani Mechanical Engineering Department University of Jordan Multi view drawings Multi view drawings provide accurate shape descriptions
More informationImproving Manufacturability
Improving Manufacturability GD&T is a Tool Not a Weapon Joe Soistman Quality Manufacturing Solutions, LLC Overview What is manufacturability, and why is it important? Overview What is manufacturability,
More information2009 Academic Challenge
2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationINDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE?
INDICATION OF FUNCTIONAL DIMENSION ACCORDING ISO GPS HOW SHALL WE APPLICATE? Karel PETR 1 1 Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University
More information1994 Dimensioning & Tolerancing
ASME Y14.5M-1994 1994 Dimensioning & Tolerancing The new scanning generation Zeiss / Applied Geometrics, Inc. Applied Geometrics, Inc. Copyright 2003 1 Zeiss Carl Zeiss is one of the world's leading enterprises
More informationGlass Box Projection. Gives you 6 sides to view of an object. 10/2/14 2
2D Drawings Glass Box Projection Gives you 6 sides to view of an object. 10/2/14 2 We can simplify this for some objects to 3 views Glass Box Approach Glass Box Approach Glass Box Approach Glass Box Approach
More information9000 Level. DS-703 Page 1 of 22 3 TITLE WORK INSTRUCTIONS, GENERAL PRINT AMENDMENT
evel DS-70 Page 1 of 22 TITE WORK INSTRUCTIONS, GENERA PRINT AMENDMENT Revision EXPANATION OF CHANGE Approvals DATE A Initial Release WB, GR 2/26/99 B C D E F G Add PMR caveat WB, GR 5/1/99 Add Surface
More informationCHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.
More informationLesson 4 Holes and Rounds
Lesson 4 Holes and Rounds 111 Figure 4.1 Breaker OBJECTIVES Sketch arcs in sections Create a straight hole through a part Complete a Sketched hole Understand the Hole Tool Use Info to extract information
More informationLocating Principles & Devices
Locating Principles & Devices 1 LOCATING PRINCIPLES To position the work piece w.r.t. to tool, to ensure precision in machining Locating: dimensional and positional relationship b/w work piece and tool
More informationWorkpiece drawing factors. Size Shape Composition Dimensions Specifications
ITCD 301-001 Workpiece drawing factors Size Shape Composition Dimensions Specifications Tolerance Total amount of dimensional variation Designer specifies an unattainable condition Designer specifies a
More informationReconciling The Differences Between Tolerance Specification. And Measurement Methods. Prabath Vemulapalli
Reconciling The Differences Between Tolerance Specification And Measurement Methods by Prabath Vemulapalli A Thesis Presented in Partial Fulfillment of the Requirements for the Degree Master of Science
More informationCopyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material
Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationISO 5459 INTERNATIONAL STANDARD. Geometrical product specifications (GPS) Geometrical tolerancing Datums and datum systems
INTERNATIONAL STANDARD ISO 5459 Second edition 2011-08-15 Geometrical product specifications (GPS) Geometrical tolerancing Datums and datum systems Spécification géométrique des produits (GPS) Tolérancement
More informationTAPS AND THREADING DIES
872 TAPS AN THRAING IS TAPS AN THRAING IS General dimensions and tap markings given in the ASM/ANSI Standard B94.9-1987 for straight fluted taps, spiral pointed taps, spiral pointed only taps, spiral fluted
More informationAutoCAD and Its Applications BASICS Reference Material. Drafting Symbols
AutoCAD and Its Applications BASICS Reference Material Drafting Symbols Symbols provide a common language for drafters all over the world. owever, symbols are meaningful only if they are drawn according
More informationRepresentation of features Geometric tolerances. Prof Ahmed Kovacevic
ME 1110 Engineering Practice 1 Engineering Drawing and Design - Lecture 6 Representation of features Geometric tolerances Prof Ahmed Kovacevic School of Engineering and Mathematical Sciences Room C130,
More information