GETTING YOUR DIGITAL HOUSE IN ORDER

Size: px
Start display at page:

Download "GETTING YOUR DIGITAL HOUSE IN ORDER"

Transcription

1 GETTING YOUR DIGITAL HOUSE IN ORDER STREAMLINING THE MBD AND DETAILING PROCESS WITH CREO Martin Neumüller Creo Product Management PTC Eindhoven, 2017

2 AGENDA 1. MBD opportunities and challenges 2. Creo 4.0 Core MBD Improvements 3. Creo 4.0 GD&T Advisor 4. Creo 5.0 Outlook 5. Q&A 2

3 1 MBD OPPORTUNITIES & CHALLENGES 3

4 MBD VS. MBE Model Based Definition: An annotated model and its associated data elements that define the product in a manner that can be used effectively without a drawing graphic sheet. Model Based Enterprise: An organization that uses model-based definitions for the purpose of commission, operation, service, and decommission of a product. Annotated 3D CAD Model 4

5 MBD VALUE OPPORTUNITIES MBD offers the potential for significant time and cost savings 5

6 MBD VALUE OPPORTUNITIES MBD offers the potential for significant time and cost savings Faster Product Development Less time spent creating product documentation Fully annotated drawing Minimally annotated model Streamlined Configuration & Change management By not having to manage additional drawing document 6

7 MBD VALUE OPPORTUNITIES MBD offers the potential for significant time and cost savings Faster Manufacturing and Inspection Streamlined CMM programming MBD = 1.7 hours 2D Drawing = 7.4 hours As tested on a specific dataset 60% reduction in First Article Inspection time Measured by a PTC customer in one pilot Data from: Investigating the Impact of Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain 7

8 MBD VALUE OPPORTUNITIES MBD offers the potential for significant time and cost savings Interpretation of 2D drawings leads to errors Reduced Errors and Non-conformances Example from: Testing the Digital Thread in Support of Model-Based Manufacturing and Inspection 8

9 MBD VALUE OPPORTUNITIES MBD offers the potential for significant time and cost savings Faster Product Development Faster Manufacturing and Inspection Reduced Errors and Non-conformances 3D Annotated Model Fully semantic, correctly applied GD&T 9

10 3D annotation tools are cumbersome and not as efficient as 2D drawing CAD tools don t support standards COMMON MBD CHALLENGES Native CAD and neutral formats don t support full semantic definition GD&T knowledge is lacking Resistance to process change (org culture) 10

11 3D annotation tools are cumbersome and not as efficient as 2D drawing Streamlined annotation workflows COMMON MBD CHALLENGES CAD tools don t support standards Improved ASME and ISO standard support Native CAD and neutral formats don t support full semantic definition Full semantic definition in native Creo Semantic PMI support with STEP AP242 GD&T knowledge is lacking GD&T Advisor to guide and educate user Resistance to process change (org culture) Familiar 2D printed output to supplement the model 11

12 2 CREO 4.0 CORE MBD IMPROVEMENTS 12

13 IMPROVED ANNOTATION WORKFLOWS Consistent placement and editing workflow Dynamic preview Placement options Contextual properties ribbon Key Annotation Types for GD&T: Datum Feature Symbol Datum Target Geometric Tolerance Dimension 13

14 Datum Feature Symbol: Automatic naming and syntax checking Standards-compliant placement options STANDARDS AND PRODUCTIVITY ENHANCEMENTS Datum Target: Built-in standard target areas Movable datum target & outside dimension Geometric Tolerance: Flexible text inputs and syntax checking Integrated Datum Reference Frame (DRF) Dimension: Improved orientation control Standard text symbols and dimension origin 14

15 15

16 Full semantic annotations in Creo FULL SEMANTIC DEFINITION Semantic query mode - ASME Y query requirements - Creo 4.0 M020 & Creo

17 17

18 Organizing information in the MBD model Appearance states Saved appearance in a combination state COMBINATION STATE ENHANCEMENTS Visibility management Visibility of annotations and supplemental geometry using either layers or combination state 18

19 Creating derivatives of the MBD model Creo View Publishing Options Choose combination states to publish Choose the default state for Creo View DERIVATIVE DATA CREATION Combination State Printing Choose which combination states to print Define a drawing format to be applied to the print Parameter callouts populated during print STEP AP242 e1 Creo 4.0 F000 Graphical Annotation presentation Creo 4.0 M020 Semantic Annotation representation 19

20 3 CREO 4.0 GD&T ADVISOR 20

21 Fast, Easy, Accurate GD&T creation CREATION Feature-centric workflow guides the user Fast creation of annotations GD&T ADVISOR OVERVIEW VALIDATION Complies with ASME and ISO standards Fully constrains the model geometry EDUCATION Extensive help content Advisor messages provide feedback on status of the GD&T applied to the model 21

22 Leveraging existing annotations ENHANCED GD&T ADVISOR INTEGRATION Analysis and reuse of existing annotations created in Creo Licensed with new Enterprise license New SMB license for GD&T Advisor (excludes reuse of existing annotations) Planned for Creo 4.0 M040 & Creo 5.0 Forward looking information subject to change without notice 22

23 DEMO VIDEO 23

24 4 CREO 5.0 OUTLOOK 24

25 Mini toolbar for annotations Intuitive context-sensitive command access for Annotations CREO 5.0 OUTLOOK USABILITY Forward looking information subject to change without notice 25

26 Mini toolbar for annotations Radial dimensions Faster creation with improved default states CREO 5.0 OUTLOOK USABILITY Forward looking information subject to change without notice 26

27 Mini toolbar for annotations Radial dimensions CREO 5.0 OUTLOOK Improved failure notifications Failing annotation reference highlighting USABILITY Forward looking information subject to change without notice 27

28 Mini toolbar for annotations Radial dimensions Improved failure notifications CREO 5.0 OUTLOOK Improved Undo/Redo Support USABILITY Forward looking information subject to change without notice 28

29 Mini toolbar for annotations Radial dimensions Improved failure notifications CREO 5.0 OUTLOOK Improved Undo/Redo Support And more USABILITY MBD Detailed Drawings Forward looking information subject to change without notice 29

30 5 QUESTIONS? 30

31

CREO 4.0: MODEL BASED DEFINITION (MBD)

CREO 4.0: MODEL BASED DEFINITION (MBD) CREO 4.0: MODEL BASED DEFINITION (MBD) Raphael Nascimento Product Manager PTC Creo 17 November, 2016 PTC Forum Europe Stuttgart, Germany Model Based Definition (MBD) AGENDA GD&T Advisor Questions? 2 Model

More information

Model-Based Definition using Creo Parametric and GD&T Advisor

Model-Based Definition using Creo Parametric and GD&T Advisor Model-Based Definition using Creo Parametric and GD&T Advisor Ted Anderson Product Line Manager Sigmetrix, LLC Model-Based Definition What is it? Why Model-Based Definition? What tools are required to

More information

Course Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning

Course Summary. CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning Course Summary CLASSROOM: On-site Instructor-led Education WEBINAR: Instructor-led On-line Training ON-DEMAND: Virtual Self-Paced Learning NO. COURSE NAME CLASSROOM* WEBINAR ON-DEMAND MBD/MBE EDUCATION

More information

MODELING FOR THE END GAME > USABLE PARTS

MODELING FOR THE END GAME > USABLE PARTS MODELING FOR THE END GAME > USABLE PARTS Mark Nielsen TechAzul 310-729-6275 liveworx.com # L I V E W O R X MARK NIELSEN Founder TechAzul BS & MS Mechanical Engineering, University of California, Berkeley

More information

Getting to the end game with QIF: Useable Parts. Mark Nielsen TechAzul

Getting to the end game with QIF: Useable Parts. Mark Nielsen TechAzul Getting to the end game with QIF: Useable Parts Mark Nielsen TechAzul 310-729-6275 mark@techazul.com Mark Nielsen Founder TechAzul Masters of Science in Mechanical Engineering, University of California,

More information

Comprehensive GD&T Evaluation Software for Manufacturing Quality Control

Comprehensive GD&T Evaluation Software for Manufacturing Quality Control Comprehensive GD&T Evaluation Software for Manufacturing Quality Control Model-Based Family of Software EVOLVE SmartProfile Comprehensive GD&T Evaluation Software for Manufacturing Quality Control Easy

More information

CADValidator: A Critical Aid for the Model-Based Enterprise

CADValidator: A Critical Aid for the Model-Based Enterprise CADValidator: A Critical Aid for the Model-Based Enterprise Abstract Learn the importance of validation for deployment of model-based engineering practices. In addition, understand what functionality is

More information

How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE

How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE How PMI and Data Modeling Standards Affect Successful Implementation of 3D MBD/MBE Understanding and Managing Risk in Implementation and Transition Bryan R. Fischer Advanced Dimensional Management LLC

More information

NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015

NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 YOUR CENTRAL SOURCE FOR DATA EXCHANGE NIST MBE PMI Validation & Conformance Testing CTC Model Verification Results February 2015 Doug Cheney CAD Validation Specialist ITI TranscenData Doug.Cheney@TranscenData.com

More information

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015

NAVAIR Non Contact In-Process Inspection. Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 NAVAIR Non Contact In-Process Inspection Gabe Draguicevich N42 FRC-SW NAVAIR NI Aug 25th, 2015 Overview Background on Navy 3D Model Status (3MS / MBD) Proposed System Examples Definition of Digital Product

More information

Mechanical Design. CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20

Mechanical Design. CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20 Mechanical Design CATIA - 3D Functional Tolerancing and Annotations 2 (FTA) CATIA V5R20 Mechanical Design CATIA - 3D Functional Tolerancing and Annotations Define and manage tolerance specifications and

More information

GD&T Encoding and Decoding with SpaceClaim

GD&T Encoding and Decoding with SpaceClaim GD&T Encoding and Decoding with SpaceClaim Dave Zwier Senior Technical Writer SpaceClaim GPDIS_2014.ppt 1 Biography Draftsman aerospace industry 1978-1980 B.S. Material Science Michigan State University

More information

MiCAT Planner Features

MiCAT Planner Features MiCAT Planner Features MiCAT Planner is Mitutoyo s latest software development for fast and efficient part programming. Mitutoyo MiCAT Planner was developed to make the generation of measurement programs

More information

#SEU PMI and CAM Express

#SEU PMI and CAM Express #SEU 2016 PMI and CAM Express Realize innovation. PMI and CAM Express A PMI Primer Two Methods to Transfer Data Solid Edge Connection JT File transfer Interoperability function (change to a different model)

More information

The Importance of a Technical Data Package to Support 3D MBE. Glen Voglesong Faurecia Rahim Alsaffar Johnson Controls

The Importance of a Technical Data Package to Support 3D MBE. Glen Voglesong Faurecia Rahim Alsaffar Johnson Controls The Importance of a Technical Data Package to Support 3D MBE Glen Voglesong Faurecia Rahim Alsaffar Johnson Controls Johnson Controls Automotive Agenda Introduction Information & Technology What s a TDP?

More information

QIF and the Future of Digital Metrology

QIF and the Future of Digital Metrology and the Future of Digital Metrology Daniel Campbell Capvidia dc@capvidia.com GPDIS_2016.ppt 1 Overview Current metrology process What is? use cases Capvidia and GPDIS_2016.ppt 2 Modern Software Process:

More information

What s New in Autodesk Inventor 2018

What s New in Autodesk Inventor 2018 What s New in Autodesk Inventor 2018 Welcome & Agenda Introduction to Inventor 2018 Professional- Grade Design Enhancements Expanded I nteroperability The I nventor Experience Autodesk Inventor 2018 I

More information

Legacy Migration Extension (LMX) Legacy Drawing Associator (LDA) Annotation Convertor (AC) Assembly Configuration Collapse (ACC) December 2011 Rev G

Legacy Migration Extension (LMX) Legacy Drawing Associator (LDA) Annotation Convertor (AC) Assembly Configuration Collapse (ACC) December 2011 Rev G Legacy Migration Extension (LMX) Legacy Drawing Associator (LDA) Annotation Convertor (AC) Assembly Configuration Collapse (ACC) December 2011 Rev G Agenda Introduction to Legacy Migration Extensions (LMX)

More information

Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20

Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting 1 (ID1) CATIA V5R20 Mechanical Design CATIA - Interactive Drafting Address 2D design and drawing production requirements. Product overview Interactive Drafting

More information

Creo Parametric 4.0 Basic Design

Creo Parametric 4.0 Basic Design Creo Parametric 4.0 Basic Design Contents Table of Contents Introduction...1 Objective of This Textbook...1 Textbook Outline...2 Textbook Conventions...3 Exercise Files...3 System Configuration...4 Notes

More information

Why QIF matters. a lot more than you think.

Why QIF matters. a lot more than you think. Why QIF matters a lot more than you think. QIF is more than a metrology standard, It provides support for Model Based Enterprise, Digital Thread, Digital Twin, and enterprise reuse of CAD data. QIF is

More information

Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski

Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski Using open CAD formats to bridge the gap between today s and tomorrow s standards CAPVIDIA Tomasz Luniewski GPDIS_2012.ppt 1 CAPVIDIA Founded in 1994 (Belgium, Russia, USA, China, Japan) Development of

More information

Tolerance Analysis Tools, Techniques

Tolerance Analysis Tools, Techniques Tolerance Analysis Tools, Techniques and MBE Training DMDII 15 11. DMDII MODEL BASED ENTERPRISE MBE Summit Dr. Andreas Vlahinos andreas@aes.nu Hosted by NIST Sponsored by DMDII and Lockheed Martin April

More information

Product and Manufacturing Information(PMI)

Product and Manufacturing Information(PMI) Product and Manufacturing Information(PMI) Ravi Krishnan V 1 Post Graduate Student Department of Mechanical Engineering Veermata Jijabai Technological Institute Mumbai, India ravi.krishnan30@gmail.com

More information

http://blogs.solidworks.com/solidworksblog/2015/10/mbdimplementation-10-dos-and-10-donts-dont-hesitate-part-1.html Create MBE Vision Plan Identify Data Needs Assess PMI Consumption 3 DimXperts 2D Drawings

More information

Software Development & Education Center NX 8.5 (CAD CAM CAE)

Software Development & Education Center NX 8.5 (CAD CAM CAE) Software Development & Education Center NX 8.5 (CAD CAM CAE) Detailed Curriculum Overview Intended Audience Course Objectives Prerequisites How to Use This Course Class Standards Part File Naming Seed

More information

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling

Creo Parametric 2.0: Introduction to Solid Modeling. Creo Parametric 2.0: Introduction to Solid Modeling Creo Parametric 2.0: Introduction to Solid Modeling 1 2 Part 1 Class Files... xiii Chapter 1 Introduction to Creo Parametric... 1-1 1.1 Solid Modeling... 1-4 1.2 Creo Parametric Fundamentals... 1-6 Feature-Based...

More information

Product and Manufacturing Information (PMI)

Product and Manufacturing Information (PMI) Product and Manufacturing Information (PMI) 1 Yadav Virendrasingh Sureshnarayan, 2 R.K.Agrawal 1 Student of ME in Product Design and Development,YTCEM -Bhivpuri road-karjat, Maharastra 2 HOD Mechanical

More information

Programme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming

Programme TOC. CONNECT Platform CONNECTION Client MicroStation CONNECT Edition i-models what is comming Bentley CONNECT CONNECT Platform MicroStation CONNECT Edition 1 WWW.BENTLEY.COM 2016 Bentley Systems, Incorporated 2016 Bentley Systems, Incorporated Programme TOC CONNECT Platform CONNECTION Client MicroStation

More information

Model Based Definition The future mode of product TPD

Model Based Definition The future mode of product TPD Model Based Definition The future mode of product TPD 11-10- 2018 Leo Broers Project Manager ASML QC DE CSI ASML organization Slide 2 Lithography is the critical tool for producing chips All of the world

More information

Creo Parametric Primer

Creo Parametric Primer Creo Parametric Primer Creo Parametric Primer Education Editions 2 C2-SE-L1-004-1.0 Written by Tim Brotherhood and Adam Haas Conditions of use Acknowledgements Feedback tbrotherhood@ptc.com Product code

More information

Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2

Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2 Standards-Based Interoperability for Design to Manufacturing and Quality in the Supply Chain Part 2 Asa Trainer GPDIS2017 Phoenix, AZ Sep 2017 GPDIS_2017.ppt 1 Introduction International TechneGroup Incorporated

More information

Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting. Glen Voglesong

Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting. Glen Voglesong Charting the transition between Engineering Specifications, the 3D Model and Inspection through Quality Reporting Glen Voglesong 2017 10 5 The power computer modeling: connecting tools and their functional

More information

PolyWorks Inspector Standard. 3 Day Course

PolyWorks Inspector Standard. 3 Day Course PolyWorks Inspector Standard INTRODUCTION TO POLYWORKS Workspace Manager Basic Options File and Project Structures PolyWorks License Manager INTRODUCTION TO POLYWORKS INSPECTOR User Interface Basic Options

More information

EGS Computers India Private Limited Chennai, Coimbatore, Trichy

EGS Computers India Private Limited Chennai, Coimbatore, Trichy White Paper on Geometric Dimensioning & Tolerancing with Tolerance Stack-Up Analysis EGS Computers India Private Limited Chennai, Coimbatore, Trichy Web: www.egsindia.com info@egs.co.in Tel: 044-2480 3370

More information

ISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices

ISO INTERNATIONAL STANDARD. Technical product documentation Digital product definition data practices INTERNATIONAL STANDARD ISO 16792 First edition 2006-12-15 Technical product documentation Digital product definition data practices Documentation technique de produits Données de définition d'un produit

More information

KOTEM was founded in 1992 as software development company specializing in metrology

KOTEM was founded in 1992 as software development company specializing in metrology Introduction Introduction KOTEM was founded in 1992 as software development company specializing in metrology Expertise in CAD, Mathematical libraries for metrology, GD&T algorithms. Our employees hold

More information

To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD

To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD To help understand the 3D annotations, the book includes a complete tutorial on SOLIDWORKS MBD Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and

More information

FOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards

FOREWORD. Technical product documentation using ISO GPS - ASME GD&T standards Technical product documentation using ISO GPS - ASME GD&T standards FOREWORD Designers create perfect and ideal geometries through drawings or by means of Computer Aided Design systems, but unfortunately

More information

Sheet Metal Punch ifeatures

Sheet Metal Punch ifeatures Lesson 5 Sheet Metal Punch ifeatures Overview This lesson describes punch ifeatures and their use in sheet metal parts. You use punch ifeatures to simplify the creation of common and specialty cut and

More information

Lesson 16 Helical Sweeps and Annotations

Lesson 16 Helical Sweeps and Annotations Lesson 16 Helical Sweeps and Annotations Figure 16.1 Helical Compression Spring Drawing OBJECTIVES Create a helical compression spring with a Helical Sweep Use sweeps to create hooks on extension springs

More information

Denmark Iceland Sweden Norway Germany

Denmark Iceland Sweden Norway Germany Del 1: MBD Model Based Definitions Ny Hulkommando Sheet metal ilogic Del2: Performance Shared view Forbedret Direct Edit funktion Nyheder Inventor 2018.1 What s New Parts Model-Based Definition Support

More information

Power tools for mechanical design. AutoCAD. Mechanical

Power tools for mechanical design. AutoCAD. Mechanical Power tools for mechanical design. AutoCAD Mechanical The AutoCAD Mechanical Advantage To compete and win in today s design marketplace, engineers need to create and revise mechanical drawings faster than

More information

Geometry Controls and Report

Geometry Controls and Report Geometry Controls and Report 2014 InnovMetric Software Inc. All rights reserved. Reproduction in part or in whole in any way without permission from InnovMetric Software is strictly prohibited except for

More information

What s New In SA CHAPTER

What s New In SA CHAPTER What s New In SA CHAPTER 1 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity

More information

Functional Tolerancing and Annotations

Functional Tolerancing and Annotations Functional Tolerancing and Annotations Preface Getting Started Basic Tasks Advanced Tasks Workbench Description Customizing Glossary Index Dassault Systèmes 1994-2000. All rights reserved. Preface CATIA

More information

DreamCatcher Agile Studio: Product Brochure

DreamCatcher Agile Studio: Product Brochure DreamCatcher Agile Studio: Product Brochure Why build a requirements-centric Agile Suite? As we look at the value chain of the SDLC process, as shown in the figure below, the most value is created in the

More information

Improving Manufacturability

Improving Manufacturability Improving Manufacturability GD&T is a Tool Not a Weapon Joe Soistman Quality Manufacturing Solutions, LLC Overview What is manufacturability, and why is it important? Overview What is manufacturability,

More information

Esri UC 2014 Technical Workshop

Esri UC 2014 Technical Workshop Introduction to Parcel Fabric Amir Plans Parcels Control 1 Points 1-1 Line Points - Lines Editing and Maintaining Parcels using Deed Drafter and ArcGIS Desktop What is a parcel fabric? Dataset of related

More information

Specification D data models

Specification D data models Previous Edition Specification 2017-04 Class: Dimensions, tolerances Class No.:01 Documentation of components by means of 3D data models 516 Part name (for databases) 2009-09 3D data models 852 005 160

More information

Best practices in product development: Design Studies & Trade-Off Analyses

Best practices in product development: Design Studies & Trade-Off Analyses Best practices in product development: Design Studies & Trade-Off Analyses This white paper examines the use of Design Studies & Trade-Off Analyses as a best practice in optimizing design decisions early

More information

Welcome to Solid Edge University

Welcome to Solid Edge University #SEU15 Welcome to Solid Edge University Realize innovation. State-of-the-Art Drafting, Made Even Better Investing in What You Need General Workflow Dimension Enhancements Annotation Enhancements Page 2

More information

Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions

Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions Using Advanced GDT Analysis to Further Reduce Rejects and Improve Rework Time and Instructions 3 rd TRI-NATIONAL WORKSHOP AND MEETING OF THE NORTH AMERICAN COORDINATE METROLOGY ASSOCIATION 3D Measurement

More information

What s New In SA CHAPTER

What s New In SA CHAPTER What s New In SA CHAPTER 2 One of the advantages of SpatialAnalyzer is that development occurs at a brisk pace. New feature requests, bug fixes, and changes are implemented quickly, giving you the opportunity

More information

Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing

Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 1660 Third edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Spécification géométrique des produits

More information

University of Bristol - Explore Bristol Research

University of Bristol - Explore Bristol Research Mahmoud, H., Dhokia, V., & Nassehi, A. (2016). STEP-based Conceptual Framework for Measurement Planning Integration. Procedia CIRP, 43, 315-320. DOI: 10.1016/j.procir.2016.02.037 Publisher's PDF, also

More information

Hochschule Magdeburg-Stendal BACHELORARBEIT. Bridging Engineering and Manufacturing. Bachelor of Engineering (B.Eng.) Hochschule Magdeburg-Stendal

Hochschule Magdeburg-Stendal BACHELORARBEIT. Bridging Engineering and Manufacturing. Bachelor of Engineering (B.Eng.) Hochschule Magdeburg-Stendal Hochschule Magdeburg-Stendal Fachbereich Ingenieurwissenschaften und Industriedesign (IWID) Insitut für Elektrotechnik BACHELORARBEIT Bridging Engineering and Manufacturing Vorgelegt von: Diego de la Fuente

More information

Sheet Metal OverviewChapter1:

Sheet Metal OverviewChapter1: Sheet Metal OverviewChapter1: Chapter 1 This chapter describes the terminology, design methods, and fundamental tools used in the design of sheet metal parts. Building upon these foundational elements

More information

Software Validation Considerations within Medical Companies per FDA 21 CFR PART 11

Software Validation Considerations within Medical Companies per FDA 21 CFR PART 11 Greg Hetland, Ph.D. International Institute of GD&T Software Validation Considerations within Medical Companies per FDA 21 CFR PART 11 One critical challenge facing today s medical OEMs and suppliers is

More information

Mechanical Design. CATIA - Weld Design 1 (WD1) CATIA V5R18

Mechanical Design. CATIA - Weld Design 1 (WD1) CATIA V5R18 Mechanical Design CATIA - Weld Design 1 (WD1) CATIA V5R18 Mechanical Design CATIA - Weld Design Design advanced welded products based on process definition and rules. Product overview CATIA - Weld Design

More information

Precision for People. 3D Multisensor Metrology Software. Precision for People

Precision for People. 3D Multisensor Metrology Software. Precision for People Precision for People 3D Multisensor Metrology Software Precision for People Put 30 Years of Multisensor Experience to Work for You ZONE3 metrology software puts the power of OGP s 30 years of multisensor

More information

A Multi-Touch Application for the Automatic Evaluation of Dimensions in Hand-Drawn Sketches

A Multi-Touch Application for the Automatic Evaluation of Dimensions in Hand-Drawn Sketches A Multi-Touch Application for the Automatic Evaluation of Dimensions in Hand-Drawn Sketches Ferran Naya, Manuel Contero Instituto de Investigación en Bioingeniería y Tecnología Orientada al Ser Humano

More information

Autodesk Inventor LT. Easy as 1, 2, 3D.

Autodesk Inventor LT. Easy as 1, 2, 3D. Autodesk Inventor LT Easy as 1, 2, 3D. Model Your Part Designs in 3D With parametric 3D solid part modeling in Autodesk Inventor LT software, you can model your part designs in 3D instead of simply drawing

More information

Test Suite for the CAx Implementor Forum Round 23J October 2008 March 2009

Test Suite for the CAx Implementor Forum Round 23J October 2008 March 2009 Passion for Results Test Suite for the CAx Implementor Forum Round 23J October 2008 March 2009 Release 1.1 February 9, 2009 Contacts: Jochen Boy PROSTEP AG Taunusstraße 42 80807 Munich, Germany jochen.boy@prostep.com

More information

The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity

The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity 1 The How-to Guide for Adopting Model Based Definition (MBD) Michelle Boucher Vice President Tech-Clarity 2 The Importance of Engineering Investments What strategies will your company use to improve profitability?

More information

Available online at ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT)

Available online at  ScienceDirect. Procedia CIRP 43 (2016 ) th CIRP Conference on Computer Aided Tolerancing (CAT) Available online at www.sciencedirect.com ScienceDirect Procedia CIRP 43 (2016 ) 339 344 14th CIRP Conference on Computer Aided Tolerancing (CAT) Towards Annotations and Product Definitions for Additive

More information

HOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services

HOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services HOW TO REVIEW A CETOL 6σ ANALYSIS Presented by Dan Lange, Manager - Services Abstract Reviewing a CETOL 6σ analysis requires a comprehensive understanding of the assembly being studied and the capabilities

More information

Reference number of working document: ISO/IEC JTC 1/SC 24 N 000

Reference number of working document: ISO/IEC JTC 1/SC 24 N 000 Reference number of working document: ISO/IEC JTC 1/SC 24 N 000 Date: 2014-08-00 Reference number of document: Committee identification: ISO/IEC JTC 1/SC 24/WG 6 Secretariat: Information technology Computer

More information

Creo Parametric Primer

Creo Parametric Primer Creo Parametric Primer Creo Parametric Primer Education Editions C1-SE-L1-004-1.0 Written by Tim Brotherhood and Adam Haas Conditions of use Acknowledgements Feedback tbrotherhood@ptc.com Product code

More information

Parametric Modeling with Creo Parametric 2.0

Parametric Modeling with Creo Parametric 2.0 Parametric Modeling with Creo Parametric 2.0 An Introduction to Creo Parametric 2.0 Randy H. Shih SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10

Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10 Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate

More information

Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing

Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing INTERNATIONAL STANDARD ISO 1660 Third edition 2017-02 Geometrical product specifications (GPS) Geometrical tolerancing Profile tolerancing Spécification géométrique des produits (GPS) Tolérancement géométrique

More information

Getting Started. Chapter. Objectives

Getting Started. Chapter. Objectives Chapter 1 Getting Started Autodesk Inventor has a context-sensitive user interface that provides you with the tools relevant to the tasks being performed. A comprehensive online help and tutorial system

More information

Supplier Quality Requirements for First Article Inspection SQR-011. Revision Date: 16 March 2011

Supplier Quality Requirements for First Article Inspection SQR-011. Revision Date: 16 March 2011 Supplier Quality Requirements for First Article Inspection SQR-011 Revision Date: 16 March 2011 Approved David Copeland, Manager Supply Chain Quality Suppliers may view this document via the Internet at:

More information

Sensitivity analysis of several body-in-white single part and assembly parameters using tolerance analysis

Sensitivity analysis of several body-in-white single part and assembly parameters using tolerance analysis assembly parameters using tolerance analysis Litwa, Frank 1, Gottwald Martin 1, Vicent Gascó 1, Vielhaber Michael 2 1 Daimler AG, Sindelfingen, Germany 2 Institute of Engineering Design Saarland University,

More information

Leverage 3D Master. Improve Cost and Quality throughout the Product Development Process

Leverage 3D Master. Improve Cost and Quality throughout the Product Development Process Leverage 3D Master Improve Cost and Quality throughout the Product Development Process Introduction With today s ongoing global pressures, organizations need to drive innovation and be first to market

More information

Published on Online Documentation for Altium Products (http://www.altium.com/documentation)

Published on Online Documentation for Altium Products (http://www.altium.com/documentation) Published on Online Documentation for Altium Products (http://www.altium.com/documentation) Home > Draftsman Enhancements A New Era for Documentation Modified by Jason Howie on Dec 4, 2017 The Altium Designer

More information

M TE S Y S LT U A S S A

M TE S Y S LT U A S S A Dress-Up Features In this lesson you will learn how to place dress-up features on parts. Lesson Contents: Case Study: Timing Chain Cover Design Intent Stages in the Process Apply a Draft Create a Stiffener

More information

Technical What s New. AutoCAD. Mechanical 2011

Technical What s New. AutoCAD. Mechanical 2011 AutoCAD Mechanical 2011 Welcome to AutoCAD Mechanical 2011 Contents Content Library...3 General Enhancements...3 Localization...3 Improved International Standards...3 Update Content Selectively...3 Part

More information

Here are the standard pre-requisites for the training course. Potential students should have or completed the following prior to the class:

Here are the standard pre-requisites for the training course. Potential students should have or completed the following prior to the class: Course: Solid Edge Fundamentals Duration: 5 days Version: ST8 At Course Completion Students will have learned how to utilize Solid Edge to design production level parametric (ordered) models of parts,

More information

TTC Catalog - Engineering Graphics Technology (EGT)

TTC Catalog - Engineering Graphics Technology (EGT) 2018-2019 TTC Catalog - Engineering Graphics Technology (EGT) EGT 001 - EGT 001 Lec: 0 Lab: 0 Credit: * Indicates credit given f engineering graphics course wk transferred from another college f which

More information

Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines

Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines Smart 3D Plant/Outfitting Curriculum Path & Training Guidelines Intergraph PPM recommends that new Smart 3D plant/outfitting users select one of the following training tracks described below. 1. System

More information

Prasanth. Lathe Machining

Prasanth. Lathe Machining Lathe Machining Overview Conventions What's New? Getting Started Open the Part to Machine Create a Rough Turning Operation Replay the Toolpath Create a Groove Turning Operation Create Profile Finish Turning

More information

Introducing Bentley Map VBA Development

Introducing Bentley Map VBA Development Introducing Bentley Map VBA Development Jeff Bielefeld Session Overview Introducing Bentley Map VBA Development - In this session attendees will be provided an introductory look at what is required to

More information

Assembly Set. capabilities for assembly, design, and evaluation

Assembly Set. capabilities for assembly, design, and evaluation Assembly Set capabilities for assembly, design, and evaluation I-DEAS Master Assembly I-DEAS Master Assembly software allows you to work in a multi-user environment to lay out, design, and manage large

More information

Activity 7.1 More Dimensioning

Activity 7.1 More Dimensioning Activity 7.1 More Dimensioning Introduction The basic standard dimensioning method established by the American National Standards Institute and the American Society of Mechanical Engineers (ANSI or ASME)

More information

COURSE SYLLABUS. Course Title: Introduction to Quality and Continuous Improvement

COURSE SYLLABUS. Course Title: Introduction to Quality and Continuous Improvement COURSE SYLLABUS Course Number: TBD Course Title: Introduction to Quality and Continuous Improvement Course Pre-requisites: None Course Credit Hours: 3 credit hours Structure of Course: 45/0/0/0 Textbook:

More information

Additive Manufacturing in a Model Based Enterprise

Additive Manufacturing in a Model Based Enterprise 3D Collaboration & Interoperability Congress Additive Manufacturing in a Model Based Enterprise Implementation Planning Speaker: Thad Henry Systems Engineering Management Office Information, Configuration

More information

Bentley Civil Update and Direction

Bentley Civil Update and Direction www. bentley. com Bentley Civil Update and Direction Mike Wilson Director, Software Development, Bentley Civil The cast of characters this year Bentley Civil Mike Wilson that would be me Director, Software

More information

Virtual components in assemblies

Virtual components in assemblies Virtual components in assemblies Publication Number spse01690 Virtual components in assemblies Publication Number spse01690 Proprietary and restricted rights notice This software and related documentation

More information

Getting Started. Before You Begin, make sure you customized the following settings:

Getting Started. Before You Begin, make sure you customized the following settings: Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides

More information

ISO 1101 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out

ISO 1101 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out INTERNATIONAL STANDARD ISO 1101 Third edition 2012-04-15 Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out Spécification géométrique

More information

DEVELOPING MANUFACTURING CAPABILITY: RE-SHAPING THE ENTERPRISE

DEVELOPING MANUFACTURING CAPABILITY: RE-SHAPING THE ENTERPRISE Nathan W. Hartman, Ed.D. Dauch Family Professor of Advanced Manufacturing Director, Product Lifcycle Management Center DEVELOPING MANUFACTURING CAPABILITY: RE-SHAPING THE ENTERPRISE What drives manufacturing

More information

Generative Drafting Overview What's New Getting Started User Tasks

Generative Drafting Overview What's New Getting Started User Tasks Generative Drafting Overview Conventions What's New Getting Started Defining the Drawing Sheet Part Drawing Opening a Part Creating a Front View Creating a Projection View Creating a Section View Creating

More information

Introduction. Parametric Design

Introduction. Parametric Design Introduction This text guides you through parametric design using Creo Parametric. While using this text, you will create individual parts, assemblies, and drawings. Parametric can be defined as any set

More information

5 Secrets for Making the Model-Based Enterprise a Reality

5 Secrets for Making the Model-Based Enterprise a Reality 5 Secrets for Making the Model-Based Enterprise a Reality White Paper January 23, 2013 1825 Commerce Center Blvd Fairborn, Ohio 45324 937-322-3227 www.ren-rervices.com 5 Secrets for Making the Model-Based

More information

DRAFTING MANUAL. Dimensioning and Tolerancing Rules

DRAFTING MANUAL. Dimensioning and Tolerancing Rules Page 1 1.0 General This section is in accordance with ASME Y14.5-2009 Dimensioning and Tolerancing. Note that Rule #1 is the only rule that is numbered in the 2009 standard. All of the other rules fall

More information

Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition

Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition Minimum Model-Based Definition (MBD) and Bill of Material (BOM) Definition with STEP AP242 Problem Statement, Direction and Preliminary Requirements A&D PAG Position Paper (AD PAG PP01.1) December 2017

More information

User Guide V10 SP1 Addendum

User Guide V10 SP1 Addendum Alibre Design User Guide V10 SP1 Addendum Copyrights Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or

More information

Advanced Dimensional Management LLC

Advanced Dimensional Management LLC Index: Mechanical Tolerance Stackup and Analysis Bryan R. Fischer Accuracy and precision 8-9 Advanced Dimensional Management 14, 21, 78, 118, 208, 251, 286, 329-366 Ambiguity 4, 8-14 ASME B89 48 ASME Y14.5M-1994

More information