Suitable for panels up to 12 tonne. No sharp edges. Lighter than comparable capacity systems. So, why the need for change?

Transcription

1

2 STRONGER FASTER SAFER Suitable for panels up to 12 tonne. No shear bars. No interference between tension bar and mesh. Easy remote clutch release. No sharp edges. Lighter than comparable capacity systems. So, why the need for change? Reid undertook extensive research into the construction challenges and pain points facing the precast panel manufacturers in Australia and New Zealand. Working closely with leading precasters, Reid were able to identify the following precast industry needs which had remained unmet, until now: - Less congestion of the fittings and reinforcement and mesh - One lifting solution to cover 90% of panels - To reduce the in-place-cost of anchors - Easier and quicker clutch engagement and release In collaboration with key precasters, the Reid Product Development Team set about designing the 3Dx Lifting System - an innovative solution to address the industry s pain points. The Evolution Of Concrete Lifting.

3 3Dx 8.5t Anchor 1 3 dimensional forged design made from tough Alloy Steel. Provides greater concrete anchorage and anchor strength. Faster Installation for precasters: The compact design of the 3Dx is easier to manoeuvre around the mesh and fittings, yet delivers 8.5t capacity. 2 I-Beam design and elongated tension bar hole. Provides maximum shear capacity without the need for a shear bar! Eliminates the congestion between the tension bar and the central mesh. Provides precasters with both a lower in-place-cost and installation efficiencies over comparative flame cut anchors. 3 Rounded outer edges. Forged design eliminates the sharp edges and burrs commonly found on conventional flame cut anchors. Reduces OH&S risk in the precast yard. 4 Symmetrical tapered clutch engagement hole. Forging allows for the profile of the clutch engagement hole to better match the profile of the clutch bolt. Provides for easier, and faster clutch engagement and remote release

4 3Dx 8.5t Clutch 5 Forged Alloy Steel. Provides for a smaller, lighter and stronger clutch that achieves 8.5t tensile capacity. The compact 3Dx clutch is easy to carry around the precast yard and on site, reducing OH&S risks. 6 Slim waisted handle design. 7 Patented new Torus design. 8 Backwards compatibility... Improved clearance between the clutch and the panel edge during lifting. Preserves the quality of your panel edges and eliminates the need for remedial repairs to damaged edges sustained during the initial lift, storage, transportation, rotation or the placement of the panels on site. Contributes to the improved clearance of the clutch from the panel edge. Increased capacity utilising the smallest possible void. The new 3Dx Torus is backwards compatible with a range of Reid proprietary lifters including the 5t FL050 Face Lift and the JAWS Edge Lift SJS, SJH and SJM anchors*. Improved versatility of the 3Dx clutch across a range of lifters reduces idle crane time caused by clutch change over. * When used with the 3Dx void former (item code: 3Dx85VF)

5 3Dx Void Former 9 Exterior shape design. 10 Void former seals. The voids created in the panel edges provide far smoother clutch engagement and release than competing edge lifting systems. Improved sealing around the head of the anchor results in less slurry ingress that otherwise needs to be removed in order to fit the clutch properly. Saves time and headaches on site. duty support plate. 11 Heavy Designed in conjunction with the 3Dx Void Former, the robust support plate is the perfect accessory to further enhance the fitment of the anchor. The use of the support plate improves the seal of the void former around the anchor, reducing concrete ingress. Versatile: The support plate can also be fixed to the shutter. Improved rubber material grade. Precast Yard Tough! The 3Dx Void Former is easy to clean without the need for solvents, but can handle the harshest of cleaning products and processes that a precast crew can dish up. Improved material grade provides longer life. Versatile... Compatible with Reid JAWS SJS, SJH and SJM Edge Lift anchors. 9 sales@reid.com.au 10 11

6 How to Use 3Dx Central Mesh Application Double Mesh Application Central Mesh: The tension bar runs beneath the central mesh. The perimeter bar can either be placed on the mesh (as shown above) or on the neck of the anchor. Double Mesh: The tension bar rests on top of the bottom layer of mesh. Perimeter bars rest in the neck of the anchor. Concrete Cover Part Number: 3Dx85 Minimum Panel Thickness (mm) Perimeter bar configuration SL82 Mesh configuration Concrete Cover (mm) 125 N16 central central 25mm to edge of Galvanised anchor 150 N16 double double 30mm to edge of mesh

7 Initial lift and storage Lift on to transport Lift, rotate and placement Product Data Part Number Weight 3Dx85 1 kg 3Dx85LC 4.1 kg 3Dx85VF 330 g 3Dx85NP 110 g Length Width 350 mm 115 mm 145 mm 75 mm 85 mm 30 mm Painted Moulded Zinc Plated Material 210 mm 76 mm Hot Dip Galvanised Alloy Steel Alloy Steel Rubber Mild Steel Pack Quantity Finish Performance Data (WLL) STRIPPING Panel Thickness (mm) Max WLL (tonne) Part # 3Dx PLACEMENT Tension Bar 10MPa 15MPa 20MPa 25MPa 32MPa 40MPa Tensile/Shear Tensile/Shear Tensile/Shear Tensile Tensile Tensile 7.00 / / / / / / / / / m 500m R32 Minimum Edge and Spacing Limits Minimum Panel Thickness (mm) Edge Distance (mm) Anchor Spacing (mm) N16/500 Tension Bar Ø and Length (mm) N16 / 500mm

8 The 3Dx anchor is the most innovative product I ve seen in our industry for years. - Dino Pietrobon, General Manager Bianco Precast (SA) We have found the new Reid galvanised forged steel 3Dx 8.5t anchor to be one of the best anchors on the market. It s great compact, lightweight design is ideal for nearly all precast situations. - Nick Mardes, General Manager Cambar Precast (VIC) The 3Dx anchor from Reid is an innovation which the precast industry has been looking for. Compact, safe and very easy to install. - George Spiropoulos, Director Euro Precast (VIC) w w w.r e i d. c o m. a u s a le r e id.c o m.a u www. reids. co. nz sales@ reids. co. nz Published by Reid (a division of ITW Australia Pty Ltd). ABN Copyright TM are registered trademarks of ITW Australia Pty Ltd. All information contained in this document is correct at the time of printing, but is subject to change without notice. ITWCSANZ2602/15