DRAFTING AND ENGINEERING SUPPORT Program ISLOs, PSLOs, CSLOs, Mapping, and Assessment Plan

Transcription

1 INSTITUTIONL STUENT LERNING OUTOMES - ISLOs ISLO 1 1 1B 1 1 OMMUNITION Read Listen Write ialogue ISLO 2 2 2B 2 2 TEHNOLOGY N INFORMTION OMPETENY emonstrate Technical Literacy pply Technology ccess Information Evaluate and Examine Information ISLO 3 3 3B 3 3 RITIL N RETIVE THINKING Inquire nalyze Problem Solve Express ISLO 4 4 4B 4 4 ITIZENSHIP Ethics iversity Sustainability/Global wareness Personal Responsibility

2 PSLO PSLO B PSLO PSLO RFTING N ENGINEERING SUPPORT PROGRM OUTOMES - PSLOs Related ISLOs 1,1B,1,2, 2B,2,2,3B, 3,3,4 esign Process and oncurrent Engineering: emonstrate a working 1,1B,1,1, knowledge of the design process and the importance of concurrent engineering 2,2,2,3, principles. 3B,3,4,4 standards in preparing technical documentation for the appropriate discipline of Working rawings: evelop complete working drawings in discipline of study for 1,1B,1,2, 2B,2,2,3, 3B,3,4 1B,1,1,2, 2B,2,2,3, 3B,3,3,4, 4 Total Number of Program Outcomes (manually enter) Number of Program Outcomes ssessed (per formula) Percentage of Program Outcomes ssessed (per formula) ##### #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! RHITETURL/IVIL ONENTRTION or S EGREE N/OR ERTIFITE OF HIEVEMENT - same as the PSLOs. MEHNIL/IVIL ONENTRTION or S EGREE N/OR ERTIFITE OF HIEVEMENT - same as the PSLOs. RFTING ESSENTILS SKILLS ERTIFITE - same as the PSLOs. RHITETURL RFTING SPEILIST SKILLS ERTIFITE - same as the PSLOs. MEHNIL RFTING SPEILITS SKILLS ERTIFITE - same as the PSLOs. RFTING N ENGINEERING SUPPORT OURSE OUTOMES - SLOs Related PSLO ES 1 - Techincal rafting I SLO 1 standards in preparing technical documentation for the appropriate discipline of imensioning-industry Standards: efine and apply the conventions and standards of SME Y14.5 relative to pictorial drawings. SLO 3 esign Process: efine the five steps in the design process. B SLO 4 SLO 5 3 Solid Modeling US: emonstrate the proper use of the US.

3 ES 2 - Technical rafting II SLO 1 standards in preparing technical documentation for the appropriate discipline of uxilliary Views: onstruct partial auxiliary views, half auxiliary views and auxiliary sections and apply them to part drawings. SLO 3 esign Process: efine the five steps in the design process. B SLO 4 SLO 5 Section View onventions: emonstrate the appropriate Section view conventions according to the SME standard for views development. SLO 6 SLO 7 esign for Manufacturability: Explain the role that esign for Manufacturability plays in product design. B SLO 8 Prototype: Interpret the SME Y14.1 Standard and apply its conventions to prototypes. SLO 1 SLO 3 SLO 4 SLO 1 SLO 3 SLO 1 SLO 3 SLO 4 SLO 5 ES 5 - omputer-ided rafting I ES 6 - omputer-ided rafting IB ES 10 - Industrial and ivil pplications of omputer-ided esign standards in preparing technical documentation for the appropriate discipline of Profiles: onstruct profile drawings using contour maps, profile measurement field notes and engineering sketches. Pacing exercise: emonstrate a working knowledge of pacing and/or taping as a form of measurement to determine field dimensions and produce field sketches that can be turned into a drawing.

4 SLO 1 SLO 3 ES 11 - Three-emensional Modeling standards in preparing technical documentation for the appropriate discipline of Welding Representation: pply welding symbols to engineering drawings showing the different types of welded joints. rawings: reate custom drawing sheets, utilize drawing templates for drawing development, reate drawing views that conform to MSE/NSI Standards and reate bill of materials and design tables.,, SLO 4 Part Modeling: reate part geometry using the best profile of the part model and onstruct the details of the part model following the design intent. SLO 5 SLO 6 SLO 7 Measurement and Gauging: reate working drawings of parts using measuring devices to interpret feature size. Working rawings: esign complete working drawings in discipline of study for B,, SLO 1 SLO 3 SLO 4 ES 12 - Geometric imensioning and Tolerancing Industry Graphic Standards: pply appropriate, current and relevant industry standards in preparing technical documentation for the appropriate discipline of basic dimensioning and tolerancing rules: efine tolerancing fundamentals, and apply material conditions to features on drawings. pply fits and allowances to mating parts and explain the advantages and disadvantages of chain and atum imensioning. Standards: emonstrate computer aided drafting practices that conform Working rawings: esign complete working drawings in discipline of study for B, SLO 5 Symbols & Terms: Identify dimensioning and geometric characteristic symbols and evaluate the appropriate use of dimensioning and geometric characteristic symbols. pply datum feature and target symbols to features on drawings and evaluate the appropriate use of material condition symbols and feature control frames on drawings.

5 ES 20 - rchitectural rawing I SLO 1 standards in preparing technical documentation for the appropriate discipline of esign Process: efine the five steps in the design process. B SLO 3 SLO 4 rawing evelopment: emonstrate correct development of rchitectural Working drawings. SLO 5 SLO 6 artesian oordinate Entry: Properly utilize cartesian coordinate input to develop data. SLO 7 rchitectural terms-vocabulary: Utilize correct rchitectural terms in class, labs and reports. ES 21 - rchitectural rawing II SLO 1 standards in preparing technical documentation for the appropriate discipline of esign Process: efine the five steps in the design process. B SLO 3 SLO 4 rchitectural esign Flow: emonstrate proper use of rchitectural esign Flow process. B SLO 5 SLO 6 rchitectural rawing evelopment: Properly develop both 2 and 3 rchitectural drawings according to accepted industry and standards., ES 22 - rchitectural rawing III-BMI (Building Information Modeling) SLO 1 standards in preparing technical documentation for the appropriate discipline of esign Process and oncurrent Engineering: emonstrate a working knowledge of the design process and the importance of concurrent engineering principles. standards: emonstrate computer aided drafting practices that conform to SLO 3 business and industry standards. 3 rchitectural model development: evelop 3 rchitectural Model (virtual) SLO 4 according to accepted industry and standards. SLO 5 Working rawings: evelop omplete set of rchitectural working drawings., B,

6 SLO 1 SLO 3 SLO 4 ES 28 - Independent Study ES 40 - Managing the omputer-ided esign () Environment SLO 1 standards in preparing technical documentation for the appropriate discipline of Standards: emonstrate a working knowledge of current standards. SLO 3 SLO 4 Industry rawing Standards: emonstrate a working knowledge of various accepted industry drafting standards. 3 Model evelopment: evelop 3 working model (prototype) for use in the design process.,,b SLO 1 SLO 3 SLO 1 SLO 3 SLO 4 ES 95 - Internship in rafting and Engineering Support Establish learning objectives: Establish on-the-job learning objectives that are related to new or expanded responsibilities or that contribute to current occupational or educational goals. Evaluate learning: Evaluate learning experience in writing or by project related to learning objectives. Perform related duties: Through work experience, under the direction of worksite supervisor, perform duties related to learning objectives. ES Selected Topics in rafting and Engineering Support,B,,

7 SLO# OURSE NUMBER: OURSE NME Related PSLO Total Number of ourses (from last number assigned) Total Number of SLOs (manually enter) Number of SLOs ssessed Per Semester (per formula) Percentage of SLOs ssessed (per formula) #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! #IV/0! Number of ourses ssessed Per Semester (manually enter) Percentage of ourses ssessed (per formula) 0% 0% 0% 0% 0% 0% 0% 0% 0% 0% 0% 0%