CLOTHING REQUIREMENT SkillsUSA-VICA Blazer, sweater, or windbreaker and accompanying official dress. Or appropriate professional/business attire.
|
|
- Ralph Whitehead
- 6 years ago
- Views:
Transcription
1 BOARD DRAFTING - MECHANICAL PURPOSE To evaluate each contestant's preparation for employment and to recognize outstanding students for excellence and professionalism in the field of machine drafting. First, refer to General Regulations. CLOTHING REQUIREMENT SkillsUSA-VICA Blazer, sweater, or windbreaker and accompanying official dress. Or appropriate professional/business attire. ELIGIBILITY Open to active SkillsUSA-VICA members enrolled in programs with machine drafting as the occupational objective. EQUIPMENT AND MATERIALS 1. Supplied by the technical committee: a. A drafting table with a T-square b. Drafting paper c. Reproduction equipment d. Technical pens, ink and supplies e. All necessary information and furnishings for judges and technical committee 2. Supplied by the contestant: a. Drawing instruments b degree triangle, 45-degree triangle, and/or adjustable triangle c. Mechanical engineering scale d. Machinery's Handbook (Industrial Press) e. Erasers and erasing shields f. Drafting tape g. Appropriate pencils and/or lead holders and leads h. Sanding board or pencil and/or lead pointers i. French curves j. Dusting brush k. Standard machine drafting templates
2 l. Dusting bag or powder m. Pocket calculator n. Other personal drafting supplies desired for machine drafting subject to the approval of the technical committee 3. Contestants may not bring their own: a. Drafting machines b. Parallel rule devices c. Erasing machines(cord or cordless) d. Lettering templates or lettering sets SCOPE OF CONTEST 1. Contestants will demonstrate their ability to perform jobs or skills selected from the following list of competencies. a. Scale Usage 1. Read the mechanical engineers scale 2. Read the metric scale b. Sketching 1. Prepare proportional design sketches 2. Make freehand sketch 3. Sketch oblique views 4. Sketch isometric pictorial views 5. Construct oblique views 6. Draw various perspective views c. Orthographic Views and Geometric Constructions 1. Construct various geometric forms using instruments 2. Construct various orthographic views in third angle projection 3. Construct various orthographic views in first angle projection 4. Construct isometric pictorial views 5. Construct oblique views 6. Draw various perspective views d. Basic Tolerancing 1. Interpret decimal tolerance dimensions 2. Calculate and assign tolerances to mating parts using standard fit tables 3. Construct a drawing using datum dimensioning e. Inking Tools and Techniques 1. Draw and erase ink lines on vellum or tracing cloth 2. Draw and erase ink lines on polyester film 3. Complete steps in inking a drawing or a tracing 4. Fill clean technical and pocket model pens
3 f. Auxiliary Views 1. Label points and planes of a three view drawing 2. Construct a primary auxiliary of an inclined plane 3. Construct a true size auxiliary of a curved surface 4. Construct true length of an oblique line 5. Determine the true angle and slope of a line 6. Determine the true angle between two planes 7. Determine visibility of crossing skew lines in space 8. Determine the visibility of a line and a plane that cross in space 9. Locate piercing point of a line and plane 10. Construct a secondary auxiliary view of an object 11. Construct point view of a line 12. Determine true angle between two planes in a secondary auxiliary 13. Construct a true size auxiliary of an oblique plane 14. Determine shortest distance between a point and a line 15. Determine shortest distance between two skew lines Sectional Views 1. Construct various material symbols in section 2. Construct a full section of an object 3. Construct a half-section of an object 4. Construct an offset section of an object 5. Construct a broken-out section of an object 6. Construct a removed section of an object 7. Construct a revolved section of an object 8. Construct a rib section of an object 9. Construct an aligned section of an object with holes, ribs or spokes 10. Construct adjacent parts in assembly section 11. Construct conventional breaks 12. Construct an assembly section h. Tools and Equipment 1. Read micrometer settings 2. Read venier calipers 3. Measure with scales 4. Compute mechanical drafting problems using a hand calculator 5. Use a micrometer 6. Use a venier caliper
4 i. Reference Materials 1. Determine manufacturer of mechanical components from Thomas Register 2. Write a letter requesting product literature for mechanical components 3. Write a technical report using reference materials j. Layouts and Working Drawings 1. Draw a design layout 2. Draw a set of detail drawings 3. Draw an assembly drawing 4. Complete a detailed title block and revision block 5. Complete a parts list 6. Make a drawing revision k. Dimensioning and Tolerancing 1. Dimension an object completely 2. Calculate and dimension clearance fit tolerances using standard fit tables 3. Calculate and dimension interference fit tolerances using standard fit tables 4. Calculate and dimension interference fit tolerances to mating parts using standard fit tables 5. Calculate and dimension hole size limits for standard dowels 6. Dimension an object using position and form tolerances 7. Determine ranges of motion of limbs and spaces required for a person l. Fasteners and Hardware 1. Construct thread symbols 2. Construct bolts, screws and nuts 3. Construct an assembly containing various fasteners 4. Construct a welded assembly drawing 5. Construct spring drawings to include specifications 6. Construct keys in assembled positions 7. Write specifications for hardware from vendor catalogues
5 m. Presentation Drawings 1. Shade pictorials 2. Construct an oblique presentation drawing 3. Construct a two-point presentation perspective of an object 4. Construct an exploded assembly presentation drawing n. Materials and Specifications 1. Determine wire and sheet metal size from gage number 2. Select materials from a materials stock book o. Manufacturing Processes 1. Calculate bend allowance for sheet metal 2. Design a casting part 3. Design a forging part 4. Design a welded part 5. Design a thermoplastic part p. Sheet Metal Developments 1. Label points, lines, and planes in views 2. Identify true lengths and types of lines 3. Identify true sizes and types of planes 4. Construct lengths of lines and true sizes of planes using auxiliary views 5. Construct true lengths of lines by rotation 6. Construct true sizes of planes by rotation 7. Locate elements of single curved surfaces 8. Construct intersections of surfaces 9. Construct intersections 10. Construct radial line developments 11. Construct parallel line developments 12. Construct special development using triangulation q. Power Transmission 1. Construction a spur gear drawing 2. Construct a bevel gear 3. Construct a worm and worm gear 4. Calculate gear ratios 5. Determine gear rotation 6. Calculate gear speeds 7. Construct a cam drawing 8. Select a chain drive
6 9. Select a V-Belt drive 10. Select types of bearings from handbooks 2. Preparation of drawings will include proper scaling and tolerancing. 3. Rating of problems will be done from reproduced copy, however, judges will observe the entire contest. 4. All lettering will be freehand. Drafting media may consist of paper, mylar (polyester film) or sepia. 5. Finished work will be done with ink or pencil on appropriate material as directed by the technical committee. 6. Time limit will be four to five hours as determined by the technical committee.
7 BOARD DRAFTING - MECHANICAL RATING FORM ITEM PTS Correct solution to problem 50 CONTESTANT NUMBER Line work 25 Lettering 15 Reproducibility 15 Layout and balance 15 Neatness 20 Accuracy 50 Dimensions 35 Written test 25 SUBTOTAL 250 CLOTHING PENALTY 0 TO -12 TOTAL
Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10
Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate
More informationReavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD)
Reavis High School Curriculum Snapshot/Cover Page for Computer Aided Design (CAD) Unit 1: Introduction In this unit, students will identify components of a Computer Aided Design (CAD) system and how to
More informationUnit4 31. UnitS 39. Unit 6 47
Preface..................... xi About the Author......... xiii Acknowledgments... xiv Unit 1 1 Bases for Interpreting Drawings........ I Visible Lines............. 3 Lettering on Drawings... 3 Sketching...
More informationA Concise Introduction to Engineering Graphics
A Concise Introduction to Engineering Graphics Fourth Edition Including Worksheet Series A Timothy J. Sexton, Professor Department of Industrial Technology Ohio University BONUS Book on CD: TECHNICAL GRAPHICS
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationEngineering Working Drawings Basics
Engineering Working Drawings Basics Engineering graphics is an effective way of communicating technical ideas and it is an essential tool in engineering design where most of the design process is graphically
More informationEngineering Drafting Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path?
Engineering Drafting Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path? (or relate to different career paths) 2. How do you identify
More informationEngineering Drafting Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path?
Engineering Drafting Essential Questions: 1. How do personal skills, interests and abilities play a role in developing a future career path? (or relate to different career paths) 2. How do you identify
More informationCOURSE SYLLABUS. Course Prefix Number:
COURSE SYLLABUS COURSE IDENTIFICATION Course Prefix Number: ETEC121 Course Title: Engineering Graphics I Division: Applied Science Division Program: Industrial Engineering Technology Credit Hours: 3 Revision
More informationENGINEERING GRAPHICS ESSENTIALS
ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive
More informationTECHNICAL DRAFTING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with technical drafting as the occupational objective.
TECHNICAL DRAFTING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of technical drafting. First, download
More informationTECHNICAL DESIGN II (546)
DESCRIPTION The second in a sequence of courses that prepares individuals with an emphasis in developing technical knowledge and skills to develop working drawings in support of mechanical and industrial
More informationENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION
IM SYLLABUS (2014) ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION SYLLABUS Engineering Drawing and Graphical Communication IM 09 (Available in September) Syllabus 1 Paper (3 hours) Aims The aims
More information2009 Academic Challenge
2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,
More informationACT-IED-1. Students will identify the disciplines related to engineering drawing and design professions.
PROGRAM CONCENTRATION: CAREER PATHWAY: COURSE TITLE: Architecture, Construction, Communications & Transportation Engineering Drawing & Design Introduction to Engineering Drawing and Design Introduction
More informationCNC MILLING TECHNOLOGY
The following rules are for the state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that national contest. The rules can be found in
More informationSOLIDWORKS 2017 Basic Tools
SOLIDWORKS 2017 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSolidWorks Part I - Basic Tools SDC. Includes. Parts, Assemblies and Drawings. Paul Tran CSWE, CSWI
SolidWorks 2015 Part I - Basic Tools Includes CSWA Preparation Material Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered
More informationCourse Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 Major Concepts to be learned:
Course Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 1. Sketching skills 2. Orthographic projection 3. Visualization of views 4. Location of lines
More informationVocabulary. Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size).
10-11-11 Vocabulary Cavalier oblique: An oblique drawing in which the depth axis lines are drawn at full scale (full size). 10-12-11 Vocabulary Centerlines: Thin lines made up of long and short dashes
More informationSOLIDWORKS 2018 Basic Tools
SOLIDWORKS 2018 Basic Tools Getting Started with Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationPrinciples and Practice:
Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations
More informationTABLE OF CONTENTS. Chapter 1: Drawing In AutoCAD
TABLE OF CONTENTS Chapter 1: Drawing In AutoCAD 1.1) Introduction 1-1 1.2) AutoCAD s User Interface 1-4 1.3) The Drawing Area 1-6 1.4) Accessing AutoCAD Commands 1-8 1.5) Standard Toolbar 1-19 1.6) Customize
More informationPrinciples and Practice
Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)
More informationSolidWorks 2014 Part I - Basic Tools
SolidWorks 2014 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit
More informationTeach Yourself UG NX Step-by-Step
Teach Yourself UG NX Step-by-Step By Hui Zhang Ph.D., P.Eng. www.geocities.com/zhanghui1998 Table of Contents Chapter 1 Introduction... 1 1.1 UG NX User Interface... 1 1.2 Solid Modeling Fundamentals...
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
The following rules are for the state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that national contest. The rules can be found in
More informationDepartment of Teaching & Learning Parent/Student Course Information. Engineering Design (AT 8530) Three Credits, One Year Grades 9-12
Department of Teaching & Learning Parent/Student Course Information Engineering Design (AT 8530) Three Credits, One Year Grades 9-12 Counselors are available to assist parents and students with course
More informationMachinist A Guide to Course Content
Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice
More information2004 Academic Challenge
2004 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University
More informationCHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean
CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.
More informationSolidWorks 2013 Part I - Basic Tools
SolidWorks 2013 Part I - Basic Tools Parts, Assemblies and Drawings Paul Tran CSWE, CSWI Supplemental Files SDC PUBLICATIONS Schroff Development Corporation Better Textbooks. Lower Prices. www.sdcpublications.com
More informationSOLIDWORKS 2015 and Engineering Graphics
SOLIDWORKS 2015 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationChapter 8. Technical Drawings
Chapter 8 Technical Drawing Technical Drawings Multiview drawings Also called three-view drawings Simple objects take three views Front, top, one side Title block Identifies who did the design Gives date,
More informationCAPILANO UNIVERSITY COURSE OUTLINE
CAPILANO UNIVERSITY COURSE OUTLINE Term: Fall 2015 Course No. APSC 130 Course: TECHNICAL DRAFTING AND COMPUTER-AIDED DESIGN INSTRUCTOR Office: FR?? Tel: 604-986-1911 (Ext.??) email: @capilanou.ca Credits:
More informationActivity 2.1 Isometric Sketching
Page 1 of 5 Activity 2.1 Isometric Sketching Introduction How do reading the face of a clock and sketching isometric pictorials relate to each other? Picture a cube in your mind. All of the surfaces of
More information2016 Academic Challenge
2016 Academic Challenge ENGINEERING GRAPHICS TEST REGIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Mark
More information2. To develop basic skills in the use of drawing instruments and drafting techniques.
IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:
More informationMultiviews and Auxiliary Views
Multiviews and Auxiliary Views Multiviews and Auxiliary Views Objectives Explain orthographic and multiview projection. Identifying the six principal views. Apply standard line practices to multiviews
More informationSpokane Public Schools Course: Drafting and Design Technology
Spokane Public Schools Drafting and Design Technology Course: Drafting and Design Technology Total Framework Hours up to: 180 hours CIP Code: 140102 Exploratory Preparatory Date Last Modified: 4/2/2015
More informationand Engineering Graphics
SOLIDWORKS 2018 and Engineering Graphics An Integrated Approach Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following
More informationCAD Mechanical Design I
EXAM INFORMATION Items 58 Points 85 Prerequisites NONE Course Length ONE SEMESTER Career Cluster ARCHITECTURE AND CONSTRUCTION MANUFACTURING SCIENCE, TECHNOLOGY, ENGINEERING AND MATHEMATICS Performance
More informationDRAFT MECHANICAL DRAWING
Industrial Technology History of Drafting 9-12 Curriculum Standard One: The student will understand, classify, and be familiar with historical events, from cave writings to computer aided drafting systems,
More informationStrands & Standards MACHINING 2
Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill
More informationThe type of drafting we will be studying is called mechanical drafting. It is the typical foundation of all drafting fields.
Design Drafting Lectures Lecture 1 Introduction: Tools and Trades Drafter Defined: Drafters translate ideas and sketches of engineers, architects, and scientists into detailed drawings which are used in
More informationSkillsUSA Wisconsin CABINETMAKING
SkillsUSA Wisconsin CABINETMAKING The following rules are for the Wisconsin state contest only. Students/Teams that qualify for the national contest need to adhere to the rules and guidelines for that
More information2003 Academic Challenge
Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationENGINEERING DRAWING N1
REQUIREMENTS: A2 drawing paper T590(E)(M24)T NATIONAL CERTIFICATE ENGINEERING DRAWING N1 (8090261) 24 March 2017 (X-Paper) 09:00 13:00 Drawing instruments and calculators may be used. This question paper
More informationIntermediate Drafting Design
Intermediate Drafting Design Unit: 1 Content Standard(s) and Section Views 1. Demonstrate the proper use of sectional view concepts to create a full section, half section, broken-out section, offset section,
More informationAIU Exam Introduction to Architectural Design & Drafting
AIU Exam Introduction to Architectural Design & Drafting School: Science & Engineering Major: Architecture Course title: Introduction to Architectural Design & Drafting Credits for course: 3 credits Description
More information2012 Academic Challenge
2012 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob Borgerson,
More informationIED Detailed Outline. Unit 1 Design Process Time Days: 16 days. An engineering design process involves a characteristic set of practices and steps.
IED Detailed Outline Unit 1 Design Process Time Days: 16 days Understandings An engineering design process involves a characteristic set of practices and steps. Research derived from a variety of sources
More informationCABINETMAKING. ELIGIBILITY Open to active SkillsUSA members enrolled in programs with cabinetmaking or millwork as the occupational objective.
CABINETMAKING PURPOSE To evaluate each contestant s preparation for employment and to recognize outstanding students for excellence and professionalism in the field of cabinetmaking and millwork. GENERAL
More informationManufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
More informationChapter 1 Overview of an Engineering Drawing
Chapter 1 Overview of an Engineering Drawing TOPICS Graphics language Engineering drawing Projection methods Orthographic projection Drawing standards TOPICS Traditional Drawing Tools Lettering Freehand
More information2009 Academic Challenge
2009 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin
More informationIntroduction to Engineering Design. Part A
Introduction to Engineering Design Final Examination Part A Spring 2005 Student Name: Date: Class Period: Total Points: Directions: Select the letter of the response which best completes the item or answers
More informationDrafting Skills. Use basic measurement systems Apply the elements of the English/Imperial system and the metric system.
CADD s Fundamental Drafting s Drafting s 1(a) Use drawing media and related drafting materials. Identify the characteristics and types of vellum, mylar, plotting pens, plotting pencils, ink and toner cartridges.
More informationTechnical Drawing 101 with AutoCAD 2018
Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.
More informationContents. Foreword. Using this Guide
Foreword xv Preface xvii Scope Using this Guide xix xix 1 Specifying technical products 1 1.1 What is meant by technical product specification? 1 1.2 Design brief 1 1.3 Function 1 1.4 Specifications 2
More informationIntroduction to Engineering Design
Introduction to Engineering Design Final Examination Spring 2005 Answer Key Parts A, B & C For Teacher Use ONLY Part A Scoring Conversion Chart Raw Converted Raw Converted Raw Converted Raw Converted 1
More information1 of 6. IT 1303 ENGINEERING DRAWING Summer Instructor. Phone:
IT 1303 ENGINEERING DRAWING Summer 1 2018 Instructor Mr. Terrence Ross Office: IT 101 Phone: 837-8137 email: tross@sulross.edu Office Hours: by appointment Time and Location Class: MTWRF 9:50-11:25 am
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationGuide To British Standards
Guide To British Standards Higher Graphic Communication C O N T E N T S page TITLE BLOCK 2 DRAWING SCALES 2 LINE TYPES 3 ORTHOGRAPHIC PROJECTION 4 SECTIONAL VIEWS 4 SCREW THREADS & COMPONENTS 7 INTERUPTTED
More informationContinuous thick. Continuous thin. Continuous thin straight with zigzags. Dashed thin line. Chain thin. Chain thin double dash
Types of line used Continuous thick Used for visible outlines and edges. Continuous thin Used for projection, dimensioning, leader lines, hatching and short centre lines. Continuous thin straight with
More informationENGINEERING AND DESIGN
ENGINEERING AND DESIGN EXAMINATION GUIDELINES GRADE 12 2017 These guidelines consist of 10 pages. Engineering Graphics and Design 2 DBE/2017 TABLE OF CONTENTS Page 1. INTRODUCTION 3 2. ASSESSMENT IN GRADE
More informationC A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010
C A R I B B E A N E X A M I N A T I O N S C O U N C I L REPORT ON CANDIDATES WORK IN THE SECONDARY EDUCATION CERTIFICATE EXAMINATION MAY/JUNE 2010 TECHNICAL DRAWING GENERAL PROFICIENCY Copyright 2010 Caribbean
More informationName: Machine Tool Technology ( )
Name: Machine Tool Technology (58.0501) Directions: Evaluate the student by checking the appropriate number to indicate the degree of competency. Rating Scale (0-6): 0 No Exposure no experience/knowledge
More informationEngineering Graphics & Technology. NQF Level 2. Sparrow Consulting LECTURER S GUIDE TVET FIRST
Engineering Graphics & Technology NQF Level 2 Sparrow Consulting LECTURER S GUIDE TVET FIRST Engineering Graphics & Technology NQF Level 2 Lecturer s Guide M Conradie Engineering Graphics & Technology
More informationTest Answers and Exam Booklet. Geometric Tolerancing
Test Answers and Exam Booklet Geometric Tolerancing iii Contents ANSWERS TO THE GEOMETRIC TOLERANCING TEST............. 1 Part 1. Questions Part 2. Calculations SAMPLE ANSWERS TO THE GEOMETRIC TOLERANCING
More informationCOASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) Introduction to Blueprint Reading for Welders
COASTAL BEND COLLEGE WELDING SYLLABUS (Revised 8/10) WLDG 1313: Introduction to Blueprint Reading for Welders Semester Hours: 3 Textbooks: Blueprint Reading For Welders, by A.E. Bennett & Louis J. Siy,
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationHonors Drawing/Design for Production (DDP)
Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals
More informationBlueprint Reading
Western Technical College 31420302 Blueprint Reading Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 Total Hours 36.00 Introduction to ready
More information2010 Academic Challenge
2010 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Jacob
More informationENGINEERING DRAWING AM 09
AM SYLLABUS (2014) ENGINEERING DRAWING AM 09 SYLLABUS 1 Engineering Drawing AM09 (Available in September) Syllabus Paper I (3 hrs) + Paper II (3 hrs) + coursework Aims The aims of the syllabus are to further
More information2007 Academic Challenge
2007 Academic Challenge ENGINEERING GRAPHICS TEST - STATE FINALS This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator
More informationIntroduction to Drafting Design
Introduction to Drafting Design Unit: 1 Content Standard(s) and Orientation 1. Relate the importance of drafting design technology in today s technological work force. Learning Objective(s) and Essential
More informationParametric Design 1
Western Technical College 10606115 Parametric Design 1 Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 3 This course is designed to introduce students
More informationAngelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus
Angelina College Technology and Workforce Division TECHNICAL DRAFTING SYLLABUS DFTG 1405 Instructional Syllabus Date approved 8/21/18 Date revised 8/21/18 I. BASIC COURSE INFORMATION A. Course Description:
More informationDepartment of Drafting & Design Engineering Technology. Syllabus
DFTG-2302 Machine Drafting 1 Houston Community College DFTG-2302 Mechanical Drafting Semester Credit Hours (SCH): 3 Continuing Education Units (CEU): 9.6 Weekly class meeting: 4 hrs Tuesda: 6:00 to 10:00
More informationGeometric Dimensioning and Tolerancing
Geometric Dimensioning and Tolerancing (Known as GDT) What is GDT Helps ensure interchangeability of parts. Use is dictated by function and relationship of the part feature. It does not take the place
More information1 of 6. IT 1303 ENGINEERING DRAWING Fall Instructor. Phone:
IT 1303 ENGINEERING DRAWING Fall 2017 Instructor Mr. Scott Wassermann Office: IT 101 Phone: 837-8137 email: jwassermann@sulross.edu Office Hours: by appointment Time and Location Class: TR 12:30-3:15 pm
More informationMechanical Drafting and Design
Job Ready Assessment Blueprint Mechanical Drafting and Design Test Code: 4038 / Version: 01 Copyright 2012. All Rights Reserved. General Assessment Information Mechanical Drafting and Design Blueprint
More informationOrthographic and Pictorial Views
ASME Y14.3-2012 [Revision of ASME Y14.3-2003 (R2008) and Consolidation of ASME Y14.4M-1989 (R2009)] Orthographic and Pictorial Views Engineering Drawing and Related Documentation Practices AN AMERICAN
More informationContents. Notes on the use of this publication
Contents Preface xxiii Scope Notes on the use of this publication xxv xxvi 1 Layout of drawings 1 1.1 General 1 1.2 Drawing sheets 1 1.3 Title block 2 1.4 Borders and frames 2 1.5 Drawing formats 2 1.6
More informationAABTKJX by Prentice Hall, Inc. A Pearson Company
Figure Number: 03-01 Page Number: Principal Items of Equipment. AABTKJX0 Figure Number: 03-02 Page Number: The T-square. AABTKJY0 Figure Number: 03-03 Page Number: Testing the Working Edge of the Drawing
More informationDrawing and Detailing
Drawing and Detailing with SolidWorks 2007 By David C. Planchard and Marie P. Planchard Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices SDC PUBLICATIONS Schroff Development
More informationOrthographic and Pictorial Views
ASME Y14.3-2012 [Revision of ASME Y14.3-2003 (R2008) and Consolidation of ASME Y14.4M-1989 (R2009)] Orthographic and Pictorial Views Engineering Drawing and Related Documentation Practices AN AMERICAN
More informationSKILLSUSA MICHIGAN CRIME SCENE INVESTIGATION STATE CONTEST 2018 TASK AND MATERIAL LIST
SKILLSUSA MICHIGAN CRIME SCENE INVESTIGATION STATE CONTEST 2018 TASK AND MATERIAL LIST CONTEST LOCATION: Amway Grand Plaza Hotel 187 Monroe Avenue NW Grand Rapids, MI 49503, US (616) 774.2000 http://www.amwaygrand.com/
More informationDrawing and Detailing with SolidWorks 2014
r n fo io n at io c at tifi ar er ep c pr WT es D R u d Pcl In C S W e th W E N Drawing and Detailing with SolidWorks 2014 Referencing the ASME Y14 Engineering Drawing and Related Documentation Practices
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationFigure 8-1 Regular Views and Auxiliary Views. 2003, Prentice-Hall, Inc. Giesecke Technical Drawing, 12e
Figure 8-1 Regular Views and Auxiliary Views. Figure 8-2 An Auxiliary View. Figure 8-3 Drawing an Auxiliary View Folding-Line Method. Figure 8-4 Drawing Parallel or Perpendicular Lines. Figure 8-5 Position
More information2013 Academic Challenge
2013 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Jacob
More informationME1105 Engineering Drawing & Design
City University London Term 1 Assessment 2008/2009 School of Engineering and Mathematical Sciences ME1105 Engineering Drawing & Design Student Name:.., Group: Examination duration: Reading time: This paper
More informationStudy Unit. Auxiliary Views. This sneak preview of your study material has been prepared in advance of the book's actual online release.
Study Unit Auxiliary Views This sneak preview of your study material has been prepared in advance of the book's actual online release. iii Preview You re entering now into another subject area in your
More informationA Concise Introduction to Engineering Graphics
Concise Introduction to Engineering Graphics ourth Edition Including Worksheet Series imothy J. Sexton, Professor Department of Industrial echnology Ohio University ONUS ook on CD: ECHNICL GRPHICS Meyers,
More informationEngineering Graphics. Class 2 Drafting Instruments Mohammad Kilani
Engineering Graphics Class 2 Drafting Instruments Mohammad Kilani Drafting Instruments A Design is as good as its instruments A engineering drawing is a highly stylized graphic representation of an idea.
More informationDimensioning. Dimensions: Are required on detail drawings. Provide the shape, size and location description: ASME Dimensioning Standards
Dimensioning Dimensions: Are required on detail drawings. Provide the shape, size and location description: - Size dimensions - Location dimensions - Notes Local notes (specific notes) General notes ASME
More informationCATIA Instructor-led Live Online Training Program
Course Outline Introduction & Understanding to CATIA Environment Introduction & Understanding to CATIA interface Starting new file Understand the Sketcher workbench of CATIA V5 Start a new file in the
More information