Course Descriptions ITE-Industrial Technology ITE101 - Introduction to Industrial Safety ITE110 - Technical Drawing I
|
|
- Blaze Franklin
- 5 years ago
- Views:
Transcription
1 ITE-Industrial Technology ITE101 - Introduction to Industrial Safety The purpose of the course is to provide instruction to entry level workers and students on general safety and health. The course will be offered in either as traditional in-class or an on-line teaching environment. This course emphasizes introductory topics needed to fully appreciate and understand the expanding field of safety and health. Topics covered in the course include but are not limited to the following: theories of accident causation, worker's compensation, interpretation and completion of OSHA 300/301 forms, related ANSI regulations, accident investigation, emergency planning, hazard analysis, professional opportunities, OSHA standards and pertinent legislation (RSRC and TSCA) related to chemical hazards, ethics in the safety profession, and legal implications. (3 crs) ITE110 - Technical Drawing I A beginning course with major emphasis on assignments and problems in the following areas: the graphic language, mechanical drawing, lettering, geometric constructions, sketching and shape description, multiview projection, sectional views, auxiliary views, dimensioning, axonometric projection, oblique projection, and perspective drawing. (3 Crs.) ITE115 - Interpreting and Sketching of Technical Drawings This course is designed for students need skills in reading and interpreting technical drawings as well as skills in technical sketching. In addition, this course is designed to prepare students for advanced technical drawing and CAD courses. Throughout the course, emphasis is placed on the understanding and use of geometric constructions, sketching and shape description, orthographic multi-view projection, sectional views, auxiliary and other ancillary views, the interpretation of various types of drawings for specialized fields of drafting, and inch, decimal and metric measuring/dimensioning methods. Two hours of lecture and three hours of lab per week. (3 crs.) ITE123 - Introducation to CAD/GIS The student will be introduced to various methods and techniques associated with computer-aided drafting (CAD) and geographical information systems (GIS). Students will use CAD and GIS software and hardware to create and explore a variety of models. Specifically, students will use GIS components to represent geographic data using both manual and computer-assisted technologies. The focus will be on the collection, compilation and display of geographic data within a database. (3 crs.) ITE130 - Introductory Circuit Analysis An introduction to DC and AC circuit theory and analysis. The theory includes electrical measurement systems, Ohm's Law, Krichoff's Laws, circuit theorems and component characteristics. Laboratory work provides experiences with electrical components, schematics, electrical tools, and basic electrical and electronic instrumentation. Prerequisite: MAT 181 or 182; corequisite: MAT 191. (3 crs.) ITE135 - Digital Electronics An introduction to the theory and application of logic gates, Boolean algebra, combinational logic, sequential logic, shift registers, counters, and arithmetic circuits. Laboratory experiments provide experiences with digital integrated circuits, circuit behavior and digital troubleshooting techniques. Laboratory exercises reinforce the theoretical concepts by providing hands-on experience with digital integrated circuits and digital troubleshooting equipment. (3 crs.) ITE151-3D Printing 3D printing covers a variety of processes whereby a part or parts may be created direct from a computer design. This saves a great deal in terms of time, materials and labor. This course acquaints students with the common processes, procedures and materials used in modern additive manufacturing using this technology. Further, this technology is being applied to a greater number ofapplications with wide-ranging societal impacts and implications. 1
2 ITE165 - Machine Processing I An introduction to basic foundry (metal-casting) and machine tool processes. Operations and techniques investigated include the following: sand molds, gating systems, patterns, castings, metal solidification, layout, tool geometry, lathe work, milling, shaping, drilling, cut-off tools, bench work, precision and semi-precision measuring instruments, CNC mill and lathe and lab safety. Class is laboratory based and meets for 6 hours per week. ITE181 - Materials Technology I A study of the theory and application of materials and materials testing used in a wide variety of industrial applications. Study includes the chemical, physical, mechanical and dimensional properties of metallic materials, plastics, and ceramics. Sufficient background in general chemistry is included to provide the proper foundation for the various concepts being presented in class. (3 crs.) ITE210 - Technical Drawing II This course provides experiences in problem-solving with reference to technical working drawings. Special emphasis is placed on American National Standards Institute practices, shop processes, conventional representation, standardization of machine parts and fasteners, preparation of tracings and the reproduction of industrial work drawings, and surface development. Pre-requisite ITE 115. (3 crs.) ITE215 - Computer-Aided Drafting (CAD) I This course is an introduction to 2-D design and drafting using CAD. Students will create and manipulate basic geometric objects in order to create 2-D models. Experiences dealing with dimensioning, layers, and isometric drawing will also be incorporated. AutoCAD software will be used to teach this course. Pre-requisite: ITE 115. (3 crs.) ITE218 - Descriptive Geometry and Surface Development This course will investigate the theory of projection to the fullest extent with emphasis on the manipulation of points, lines, and planes in space. The practical application of this theory will be shown in surface development problems. Pre-requisite: ITE 115 (3 crs.) ITE220 - Introduction to Industrial Health and Hygiene The purpose of the course is to provide instruction to entry level workers and students on general safety and health. The course will be offered in either as traditional in-class or an on-line teaching environment. This course introduces students to the Health / Hygiene aspect of Industrial Safety. Topics include but are not limited to the following: Toxicology, routes of entry and effects of exposures, exposure limits and their calculations, monitoring equipment; confined space hazards and testing techniques, respirator testing techniques, degradations and efficiency of respirators, exposure calculations; noise protection, hearing loss, monitoring techniques, calculations, 3dB and 5db rules, NRR attenuations; Personal Protective equipment testing (head, eye and foot); Ergonomics, risk factors, musculoskeletal disorders ( MSDS) or CTS, calculation of forces on the body, design factors,intervention techniques, effects of temperatures and burns. ITE223 - Intermediate CAD/GIS The student will be introduced to advanced methods and techniques associated with computer-aided drafting (CAD) and geographic information systems (GIS). The GIS portion will focus on the collection, compilation and display of geographic data within remote sensing software and an advanced geographic information system software package. Students will create their geotechnology application project using geographic information systems and remote sensing. The CAD portion will focus on the creation and manipulation of geographic maps and surveys and the incorporation of geographic data in various applications using a CAD software package. Prerequisite: GEO 123 or ITE 123. (3 crs.) ITE236 - Computer Numerical Control Programming I An introduction to the procedures for manually programming numerically controlled equipment. The student calculates coordinates (using basic trigonometric functions) based on the Cartesian coordinate system. Programs are then written following a machine format detail utilizing the necessary preparatory, speed, feed, tool, motion and miscellaneous commands to manufacture parts on both a CNC machining center (mill) and turning center (lathe). Both absolute and incremental modes of programming are utilized when establishing cutting coordinates 2
3 for linear interpolation (parallel, 45 degree angles) and circular interpolation (complete arc and full quadrant) for CNC mills and lathes. This course meets for six hours of lab per week. ITE250 - Introduction to Automation This course provides the student with a variety of introductory experiences in industrial automation. Theoretical as well as practical hands-on laboratory applications in robotics, automatic guided vehicles (AGV's), computer aided drafting (CAD), machine vision, automatic identification, and programmable logic controllers (PLC's). Students learn what automation is, its advantages and disadvantages, and how it is applied. ITE251 - Product Design and Development This course focuses on product design and development, examining the relationship between aesthetics, industrial design and the use of technology to create possible new ideas and solutions. Students are introduced to the fundamentals of design and how these function as elements in both large and small projects from custom to mass-produced goods. Instructional materials and case studies will be presented on the history of design, design concepts, modelling, aesthetics, safety, ergonomic and economic considerations will be presented. This course will help the student develop a better understanding of product design processes and practices. ITE301 - Safety Supervision The first portion of the course will investigate safety analyses and management of industrial and commercial systems, working with governing agencies, and the safety systems approach. The students will make observations in an industrial setting, evaluations, and development of recommendations, and a presentation to the management of the observed company. ITE305 - OSHA General Industrial Safety The purpose of the course is to provide instruction on general industrial safety and health. This coursemeets OSHA's requirement for its 30 hour General Industry Outreach Training Program. It emphasizes hazard identification, avoidance and control. Topics covered include the following: Introduction to OSHA, the OSHA Act / General Duty clause, Inspections, Citations and Penalties, Record-keeping, Walking and Working Surfaces, Mean of Egress and Fire Protection, Electrical Hazards, Personal Protective Equipment, Respiratory Protection, Hearing Protection, Machine Guarding, Hazard Communication, Chemical Safety, Lockout/tagout, Confined Space Hazards, Welding Brazing and Cutting Hazards, Asbestos Awareness, Hazardous Materials, Industrial Hygiene and Ergonomics. ITE311 - Ergonomics An introduction to techniques and procedures for developing and applying the principles of human factors and ergonomics to system design and the systematic analysis, identification and evaluation of human-machine systems. Current advances in practical biomechanics and ergonomics in industry in combating musculoskeletal injury and illness will be discussed. ITE315 - CAD II This course is an extension of Computer-Aided Design into three-dimensional representations. Unlike traditional CAD that focuses on wire-frame and orthographic/isometric drawings, this course focuses on solid models of various components and assemblies. The concepts of rendering, animating and properties analysis are introduced. Prerequisite: ITE 215 or permission of instructor. (3 crs.) ITE320 - Architectural Drafting and Design Experience is provided in basic residential and commercial design. The fundamental sequences in designing and drawing are stressed as the student completes all architectural drawings necessary for the construction of a residence. Elements of the course include: architectural styles, area planning, structural detailing, pictorial rendering, building specifications, and cost analysis. ITE325 - Statics and Strength of Materials The study of statics and strength of materials focuses on the pragmatic technologist, who needs a better understanding of the fundamentals of mechanics. The statics portion of the course is concerned with parts (bodies) of machines and structures, while the strength portion covers the ability of these individual parts to resist 3
4 applied loads. Then the technologist will be able to determine the dimensions to ensure sufficient strength of the various industrial materials and manufactured components. ITE341 - Quality Control An introduction to the methods used in analyzing quality control. Topics covered include a study of thefundamentals of statistics and probability, the construction and use of control and attribute charts, thedefinition and use of acceptance criteria and the use of computers in modern quality control operations. Anoverview of the role of quality control department of a manufacturing facility will be presented. ITE342 - Quality Planning and Analysis This course builds on the techniques learned in Quality Control and applies those techniques to an industrial organization in a practical way. The student will learn the basics of the six sigma approach to quality and the use of quality functional deployment to identify customer needs. Students will study how a quality plan can be developed and implemented. The course will apply quality to all aspects of the organization, including personnel, shop floor operations, the supply chain, and products and services. Prerequisite: ITE 341. (3 crs.) Typically fall. ITE366 - CAM I (Computer-Aided Manufacturing-Mastercam) An introductory course in Computer Assisted Manufacturing using Mastercam software. It is an upper level CNC programming course as it relates to manual programming techniques developed in Numerical Control Programming I. This course requires the use of a graphics based language (Mastercam) to create basic geometric elements. Geometric elements are used to create tool/cutter paths necessary to establish machining coordinates for both CNC machining (mill) and turning (lathe) centers. Class meets five hours per week, 2 hour lecture 3 hour lab. ITE375 - Principles of Production An introduction to the methods used in analyzing the production flow from raw materials to the finishedproducts. Topics covered include a study of operations types, operations layout, decision analysis, workmeasurements, production and inventory control, scheduling and waiting line analysis. An overview of therole or production management will be presented. ITE376 - Technical Supervision This course examines the aspects of technical supervision and brings the human factor into operations. Thestudent will learn the basics of the supervision of technical operations with a focus on manufacturing and service environments. This course will include the basis for motivating employees and will identify some of the special problems associated with technical production and manufacturing. ITE385 - Industrial Cost Estimating An introduction to the methods used to cost and budget a production organization. Topics include someaccounting basics, cost accounting, the time value of money and cost estimating as related to industrial operations. ITE415 - Geometric Dimensioning and Tolerancing Geometric Dimensioning and Tolerancing is a standard procedure to describe the information contained on a technical drawing. Use of standards permit a consistent interpretation of the information by all who use the technical drawing, and insures that the intentions of the creator of the drawing will be understood by the users of the drawing. Students will learn the fundamentals of Geometric Dimensioning and Tolerancing using the ASME Y14.5M drawing standard and the application of the standard to the creation of technical drawings for manufacturing and archival purposes. ITE416 - Introduction to Finite Element Analysis This course will use a PC based CAD program and finite element software program to introduce the concepts of mathematical modeling and engineering analysis. The student will create a solid model of a component and transform that model into a finite element model. The students will then apply the appropriate boundary condition to the model and find the solution to the problem. The student will also be introduced to the concepts of bottomup and top-down solid modeling and will perform simple structural analyses using the generated finite element model. 4
5 ITE417 - Parametric Design Using Inventor This course presents the advanced features of solid modeling where dimensions in a component and an assembly are replaced with parameters. This permits the creation of a single component/assembly model that may be used for multiple items in a family by redefining the parameters of the component/assembly. Parameters may also be used to define an item for analysis or to test a particular concept with particular dimensions to insure that the product is safe and useful. Students will learn the procedure for transforming a solid model into a parametric model and the procedures for changing and maintaining the parameters for an instance of an item. ITE420 - Production Analysis An introduction to the methods used in analyzing the production flow from raw materials to the finishedproduct. Topics covered include a study of the major manufacturing processes, materials handling, plant layout, operations analysis, industrial engineering, inventory control and shipping. An overview of the role of production management as it relates to the various areas of an industrial environment will be presented. ITE460 - Principles of Manufacturing An introduction to the methods used in manufacturing processes. Topics covered included a study of the manufacturability, fabricability and marketability of manufactured products. Problems encountered by production managers in changing raw materials into a consumable product are discussed. The use of personal computers for the solution of manufacturing problems is included. ITE461 - Supply Chain Fundamentals A key item in the management of a manufacturing operation is the making of intelligent decisions. The manufacturing planning and inventory control systems provide the information to efficiently manage the flow of materials, effectively utilize people and equipment, coordinate internal activities with those of suppliers, and communicate with customers about market requirements. This course will provide an overview of the basic principles of production and inventory control, including MRP, JIT, master scheduling, capacity planning, demand management, and the integration of these basic principles. Prerequisite: ITE 375 (3 crs.) Typically Fall. ITE462 - Inventory, Scheduling and Planning This course will be the second course taken by students in the general area of production and inventory control. Focus of this course is on the various techniques for material and capacity scheduling. Included will be detailed descriptions of material requirements planning (MRP), capacity requirements planning (CRP), inventory management practices, and procurement and supplier planning. Topics include recognizing techniques and practices of inventory management, the mechanics of the detailed material planning process, the planning operations to support the priority plan, and the planning procurement and external sources of supply. Prerequisite: ITE 461. (3 crs.) Typically Spring ITE471 - Project Management Operations and projects differ in that operations are on-going while projects are temporary. A project, by itsvery nature, is also unique and requires particular knowledge of how the components combine to form anintegrated whole. This course will introduce the student to the field of Project Management and will presentan overview of the body of knowledge necessary for successful Project Management. The course will focuson the fundamental principles that cross the boundaries of projects and will demonstrate how ProjectManagement techniques can be applied to a wide variety of disciplines. This course will also introduce thestudent to computer methods for solving Project Management problems. ITE475 - Computer-Integrated Manufacturing Computer Integrated Manufacturing is the expansion of computers from the shop floor into the other aspects of the manufacturing enterprise. All of the data necessary to control the shop process may not be available on the shop floor. Such areas as accounting, inventory, shipping, and purchasing have data that can influence what happens on the production floor. Also, the general concepts of Production and Inventory Control must be considered. This course will bring together all of the individual parts of the organization to show how they can impact what is manufactured and how it is manufactured. 5
6 ITE476 - Lean Enterprise Production systems consist of more than the machines that produce the consumer products. Other parts of the business operation contribute to the production and must be included in any discussion. Pre-requisite: ITE 461 (3 crs.) ITE481 - Concepts and Issues in Technology Management This course combines the elements of Technology Management, providing the participant with theopportunity to study concepts and issues typically encountered by an industrial technologist. Thismultidisciplinary course is intended as an overview of Technology Management as a discipline withemphases on the operation and performance of technological systems in industry and their effect on peopleand the environment. Also, the potential and limitations of the future developments in technological systemsand their use in industry is discussed. Diversified approaches will be used to explore some crucialcontemporary industry concepts and issues including problem solving and role-playing in various industrialsettings and situations. ITE495 - Technology Management Internship Student interns work with an industrial organization which most nearly approximates their goals for employment. The intent of the internship is to provide students with practical work experience in an environment in which they will be dealing with practical problems requiring real solutions in a relative short time frame. Working with the Internship Center, advisor and department chairperson approval are required before course enrollment. Credit for this course shall be awarded as one academic credit for each 40 hours of internship work. During the internship, students will be limited to three weeks of activities in one discipline area. For the purposes of this internship, a discipline area is defined as an area of industrial work that would normally be taught by one undergraduate course. Approval of the instructor and the Applied Engineering and Technology Department Chairperson is required. 6
Computer Aided Design and Engineering (CAD)
Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering (CAD) CAD 1050 Geometric Dimensioning and Tolerancing (GD&T) This course is designed to cover the fundamentals as well
More informationMACHINE SHOP (420) Machine Shop (420)
Machine Shop (420) 2019-2020 1 MACHINE SHOP (420) 420-120. Machine Tool/Fabrication. (2 Credits) This course is designed to provide fabrication students with knowledge and applications of machine tool
More informationClass Title Description Credit Hours Contact Hours Lecture Hours Lab Hours ESU NOTE
2 3 4 AIT 1010 Construction Measurements and Calculations Course covers fundamental measuring and calculation skills essential to the skilled craftsperson working in the construction industry. Provides
More informationContent Map For Career & Technology
Content Strand: Applied Academics CT-DD1-1 CT-DD2-1 CT-DD3-1 CT-DD4-1 Use math concepts in Use math concepts in Use math concepts in Use math concepts in design and engineering design and engineering design
More informationCertificate. Estimated Program Length & Cost *
159 The College for Real Careers (DDT) Program Information Average Full-Time Wage Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and
More informationDrafting & Design Technology
131 Location: Library Tower - 2nd Floor Program Information Every new structure or machine starts out as the idea of a designer or an engineer. It is only through the knowledge and ability of highly skilled
More informationComputer-Aided Drafting and Design Technology, A.A.S.
Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and
More informationHigh School PLTW Introduction to Engineering Design Curriculum
Grade 9th - 12th, 1 Credit Elective Course Prerequisites: Algebra 1A High School PLTW Introduction to Engineering Design Curriculum Course Description: Students use a problem-solving model to improve existing
More informationAdvanced Computer Aided Design COURSE OUTLINE
Advanced Computer Aided Design COURSE OUTLINE 1. Course Title: Advanced Computer Aided Design 2. CBEDS Title: Computer Aided Drafting/Design 3. CBEDS Number: 5705 4. Job Titles: Framers Construction Inspectors
More informationINDUSTRIAL TECHNOLOGY
INDUSTRIAL TECHNOLOGY INDUSTRIAL TECHNOLOGY COURSES CAN BE USED AS ELECTIVE CREDITS CONTENT MISSION STATEMENT: The content area of Industrial Technology education provides a foundation for all students
More informationTECHNICAL DESIGN II (546)
DESCRIPTION The second in a sequence of courses that prepares individuals with an emphasis in developing technical knowledge and skills to develop working drawings in support of mechanical and industrial
More informationPROGRAM OUTLINE BASIC DRAFTING TECHNOLOGY
BASIC DRAFTING TECHNOLOGY The mission of the Basic Drafting Technology Program at Crowley's Ridge Technical Institute is to provide the training necessary for students to be competitive in the workforce
More informationCabrillo College Catalog
ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Program Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment
More informationComputer Aided Design and Engineering Technology
Oakland Community College 2017-2018 Catalog 1 Computer Aided Design and Engineering Technology Degrees Computer Aided Engineering Option (CAD.CAE.AAS) (http:// catalog.oaklandcc.edu/programs/computer-aided-design-draftingtechnology/computer-aided-design-drafting-technology-engineeringoption-aas)
More informationDIABLO VALLEY COLLEGE CATALOG
Engineering technology ENGINEERING TECHNOLOGY - ENGTC Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities Career options in engineering
More informationDrafting Technology (DT) Contact the Design and Consumer Eudcation Department for further information. (760) , ext Office: ST-49
Disability Resource-Drafting Technology This individualized course is designed to assess, by means of diagnostic testing and the California Community College learning disability eligibility process, the
More informationTECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Graduation Requirement: All students must earn one credit in Arts or Career & Technical Education classes. COURSE TITLE CREDITS GRADES OFFERED Communications Pathway-Media* Introduction
More informationDrafting/CAD. 230 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
230 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationCOURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:
COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ
More informationManufacturing Technician Training
Mike McKinney / Jefferson College I. Objective: Developed to meet the industry demands and provide a six-week certification program to fast track individuals to secure a position in the manufacturing industry
More informationTTC Catalog - Engineering Graphics Technology (EGT)
2018-2019 TTC Catalog - Engineering Graphics Technology (EGT) EGT 001 - EGT 001 Lec: 0 Lab: 0 Credit: * Indicates credit given f engineering graphics course wk transferred from another college f which
More informationMECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET)
Mechanical Engineering/Manufacturing Industrial Technology (MET) - Cuyahoga Community College 2018-2019 Catalog 1 MECHANICAL ENGINEERING/ MANUFACTURING INDUSTRIAL TECHNOLOGY (MET) MET-1100 Technology Orientation
More informationStrands & Standards MACHINING 2
Strands & Standards MACHINING 2 COURSE DESCRIPTION This course is the second in a sequence that will use technical knowledge and skills to plan and manufacture projects using machine lathes, mills, drill
More informationDrafting/CAD. 234 Drafting/CAD. Faculty and Offices. Certificates and Degrees Awarded. Certificate of Achievement Requirements: Drafting/CAD
234 Drafting/CAD Drafting/CAD The 21st century is witnessing a rapid growth in science, engineering and technology. This will require society to read, write and draw the language of technology drafting.
More informationMachine Tool Technology
184 Location: Patterson Campus - Bldg. F Program Information Almost every product made by American industry contains metal parts or is manufactured by machines made with metal parts. With high demand for
More informationDrafting. Drafting and Design Technician
Drafting and Design Technician Program Description This program is designed to provide students with entry level skills in the fields of mechanical, electrical, civil and architectural drafting and/or
More informationApprenticeship Training Standard. Schedule of Training. Draftsperson Mechanical. Trade Code: 614A
Apprenticeship Training Standard Schedule of Training Draftsperson Mechanical Trade Code: 614A Development Date: March 2000 NOTICE OF COLLECTION OF PERSONAL INFORMATION 1. At any time during your apprenticeship
More informationIndustrial and Systems Engineering
Industrial and Systems Engineering 1 Industrial and Systems Engineering Industrial and Systems Engineers plan, design, implement, and analyze systems. This engineering discipline is where technology, people,
More informationComputer Aided Drafting and Design
Computer Aided Drafting and Design Degrees: AAS Computer Aided Drafting and Design 60-63 Diploma: Computer Aided Drafting and Design 48-51 Certificates: Computer Assisted Drafter 30-36 Detailer 25-28 Drafter
More informationENGINEERING & TECHNOLOGY PROGRAM
ENGINEERING & TECHNOLOGY PROGRAM COURSE LENGTH CREDITS OPEN TO Construction Technology Year 5 9-12 Manufacturing Technology I Semester 2.5 9-12 Manufacturing Technology II Year 5 10-12 Technical C.A.D.
More informationNTMA-U Web-based module training
NTMA-U Web-based module training Modules are self-paced and interactive. Each module takes approximately 30-40 hours to complete. Instruction includes quizzes to progressively test the user s understanding.
More informationTechnology Education Grades Drafting I
Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity
More informationSketching & Auto CAD (Computer Aided Design) - Mechanical Design
Western Technical College 10606113 Sketching & Auto CAD (Computer Aided Design) - Mechanical Design Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits
More informationITT Technical Institute. CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS
ITT Technical Institute CD111 Introduction to Design and Drafting Onsite and Online Course SYLLABUS Credit hours: 4 Contact/Instructional hours: 50 (30 Theory Hours, 20 Lab Hours) Prerequisite(s) and/or
More informationITT Technical Institute. DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS
ITT Technical Institute DT1110 Introduction to Drafting and Design Technology Onsite and Online Course SYLLABUS Credit hours: 4.5 Contact/Instructional hours: 56 (34 Theory Hours, 22 Lab Hours) Prerequisite(s)
More informationESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies and Computer Sciences Division ENR 103 Engineering Graphics and Introduction to CAD Course Outline Course Number & Name: ENR 103 Engineering Graphics and Introduction
More informationMFGE Manufacturing Engineering
MFGE Manufacturing Engineering 1 MFGE Manufacturing Engineering MFGE 2142 Fundamentals of Engineering Mechanics 4 Credit Hours. 0,3 Lecture Hours. 0,2 Lab Hours. This course provides an introductory survey
More informationFreshman Engineering Drawing and Visualization at Youngstown State University. Hazel M. Pierson, Daniel H. Suchora. Youngstown State University
Session 2438 Freshman Engineering Drawing and Visualization at Youngstown State University Hazel M. Pierson, Daniel H. Suchora Youngstown State University Introduction The first year engineering curriculum
More informationHonors Drawing/Design for Production (DDP)
Honors Drawing/Design for Production (DDP) Unit 1: Design Process Time Days: 49 days Lesson 1.1: Introduction to a Design Process (11 days): 1. There are many design processes that guide professionals
More informationTECHNOLOGY AND ENGINEERING EDUCATION
TECHNOLOGY AND ENGINEERING EDUCATION Brian Giovanini, Department Chairperson - MVHS Lisa Traut, Department Chairperson - NVHS Andrea Hendrickson, Department Chairperson - WVHS The Technology & Engineering
More informationTest Code: 8294 / Version 1
Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment
More informationEstimated Program Length & Cost * Award Length Credit Hours Tuition Fees Books Tools Supplies
- 170 The College for Real Careers Program Information The Program at Trenholm State Community College is a multi-craft curriculum. Many crafts are a part of the training process. Craft related instructors
More informationDrafting Technology (DT) Contact the Design and Consumer Education Department for further information, (760) , extension 2349
Disability Resource-Drafting Technology DR 26 Composition Skills and Strategies for the Intermediate Writer (3) Recommended preparation: ENG 10 or eligibility for ENG 50 This class is designed to help
More informationComputer Integrated Design and Graphics
The (CIDG) program at Victor Valley College is growing to keep pace with our High Desert community. We have many new and exciting courses, programs, and certificates to meet the needs of our students.
More informationCOURSE CONTENTS FOR THE AVTS COURSES
Revision: 00 LEARNING CONTENT Page 1 of 14 COURSE CONTENTS FOR THE AVTS COURSES AT CAD- CAM LAB, ATI, VIDYANAGAR, HYDERABAD Revision: 00 LEARNING CONTENT Page 2 of 14 III COURSE CODE CAD-01 IV COURSE TITLE
More informationUtility and Energy Systems Program
Utility and Energy Systems Program Electrical Technology Associate in Applied Science Degree Electrical Technology, Construction Electrical Utility/Lineworker Electrical Tech. Control/Maintenance Electrical
More informationTeaching Manufacturing Using The Golden Key Reverse Engineering
à Teaching Manufacturing Using The Golden Key Reverse Engineering Session 3263 Harry L. Hess The College of New Jersey I. Introduction The United States will be able to continue its unprecedented economic
More informationESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline
ESSEX COUNTY COLLEGE Engineering Technologies & Computer Sciences Division ENR 106 Intermediate Computer-Aided Design Course Outline Course Number & Name: ENR 106 Intermediate Computer-Aided Design Credit
More informationPROJECT LEAD The way. Quakertown community high school
PROJECT LEAD The way Quakertown community high school is a college recognized pre-engineering program designed to prepare students for the challenges of college classes. Quakertown Community High School
More informationGrade Level Benchmarks and Components
Grade Level Benchmarks (GLB) describe the concepts and skills we want students to know and be able to demonstrate in each grade level and each course. Teachers will assess student academic performance
More informationEK-02-01: Güzel Sanatlar ve Mimarlık Fakültesi, Mimarlık Bölümü Eğitim Öğretim Yılı İngilizce Ders Müfredatı Değişikliği
DEPARTMENT OF ARCHITECTURE 2018-2019 ACADEMIC YEAR COURSE CURRICULUM COURSE CONTENTS 1. YEAR FALL SEMESTER ARC 1000 Basic Design Course Hours: 2 + 4 Credits: 4 ECTS: 8 This course aims to teach basic design
More informationStudent s Signature Completion Date. High School Teacher s Signature Date. Recommended Grade High School. COCC Review Instructor s Signature
2 Credits College Now/CTE Student Outcomes Checklist cocc.edu/departments/college-now/ Student s Name Student s Signature Completion Date High School Teacher s Signature Date Recommended Grade High School
More informationMachine Tool Technology/Machinist CIP Task Grid
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 102 Identify & explain safety equipment and procedures. 103 Identify
More informationInterior Design Associate in Applied Science Degree (A.A.S.)
Berkeley College Overview Academic Programs Admissions and Finances Administration, Faculty, and Staff Contact Us Interior Design Associate in Applied Science Degree (A.A.S.) Course Requirements MAJOR
More informationOwensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List
Owensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List 2013-2014 Courses below are subject to availability at each partner high school, based on teacher
More informationDRAFT MECHANICAL DRAWING
Industrial Technology History of Drafting 9-12 Curriculum Standard One: The student will understand, classify, and be familiar with historical events, from cave writings to computer aided drafting systems,
More informationTECHNOLOGY SYSTEMS MANAGEMENT (TSM)
Technology Systems Management (TSM) 1 TECHNOLOGY SYSTEMS MANAGEMENT (TSM) Courses primarily for undergraduates: TSM 110: Introduction to Technology (1-0) Cr. 1. F. Prereq: AST or I Tec majors only or permission
More informationCTE - CIP Course Details Catalog
Status: Open Start Year: 2011 End Year: Group 1 Minimum Carnegie Units: 2.00 Minimum Course Selection: School: 1 ACC: 0 Regional: 0 State Course ID State Course Title Max Carnegie Units Start SY End SY
More informationIndustrial Technology Curriculum
Industrial Technology Curriculum Written 2009-2010 Mission Statement: Industrial Technology The Mission of the Oskaloosa Community School Industrial Technology Department is to provide opportunities to
More informationFlorida Department of Education CURRICULUM FRAMEWORK
Florida Department of Education CURRICULUM FRAMEWORK July 2001 Program Title: Occupational Area: Blueprint Reading and Estimation Industrial Education PSAV Program Numbers I469919 CIP Number 0646.999901
More informationENGINEERING TECHNOLOGY PROGRAMS
Engineering Technology Accreditation Commission CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews during the 2019-2020 Accreditation Cycle Incorporates all changes approved
More informationDFTG Blueprint Reading and Sketching
Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2005-2006 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November
More informationMECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES
Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation,
More information- 9_12TI7973-QUIZ2 - Print Test
Page 1 of 12 Report: Test Answer Key District: Madison Test: Description: Unit B EDP Form: 501 1. Stereolithography, selective laser sintering, ballistic particle manufacturing, and laminated object manufacturing
More informationMachinist A Guide to Course Content
Machinist A Guide to Course Content Machinists work with metals; operate metal-cutting and shaping machinery. Training Requirements: To graduate from each level of the apprenticeship program, an apprentice
More informationPRECISION MACHINING & TOOLING
MONROE COMMUNITY COLLEGE A P P L I E D T E C H N O L O G I E S D E P A R T M E N T PRECISION MACHINING & TOOLING www.monroecc.edu Table of Contents Department of Labor Information Type of Work 1-2 Training,
More informationELECTRIC DRAFTING TECHNICIAN I ELECTRIC DRAFTING TECHNICIAN II
CITY OF ROSEVILLE ELECTRIC DRAFTING TECHNICIAN I ELECTRIC DRAFTING TECHNICIAN II DEFINITION To perform a variety of technical engineering drafting and mapping duties related to the design, construction,
More informationINDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Alignment
INDUSTRY AND TECHNOLOGY Institutional (ILO), Program (PLO), and Course (SLO) Program: ILOs Automation, Robotics, and Manufacturing SLO-PLO-ILO ALIGNMENT NOTES: 1. Critical Thinking Students apply critical,
More informationIndustrial Technology
Industrial Technology The following matrix indicates those courses deemed transferable among institutions listed across the top of the matrix. The numbers on the matrix represent the number of semester
More informationCNC Lathe Production Technician
Brief Program Description The CNC Lathe Production Technician program is a 9 week online program designed to help students gain the skills and knowledge required for work as entry-level CNC lathe production
More informationCanadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles
More informationINDUSTRIAL TECHNOLOGIES
79 INDUSTRIAL TECHNOLOGIES Contact: Ron Scozzari 419.27.1429 rscozzari@northweststate.edu www.northweststate.edu 201-2017 www.northweststate.edu 80 Education is not the filling of a pail, but the lighting
More informationMachinist On-the-Job Training Guide
Machinist On-the-Job Training Guide Machinists work with metals and other materials and operate lathes, milling machines and other tools to produce shapes to a required finish and size. Training Requirements:
More informationEngineering, & Mathematics
8O260 Applied Mathematics for Technical Professionals (R) 1 credit Gr: 10-12 Prerequisite: Recommended prerequisites: Algebra I and Geometry Description: (SGHS only) Applied Mathematics for Technical Professionals
More informationOFFICE OF CURRICULUM & INSTRUCTION DRAFTING I. Grades Credits: 5
OFFICE OF CURRICULUM & INSTRUCTION DRAFTING I Grades 9-12 Credits: 5 ABSTRACT Drafting I offers the student an excellant foundation in drafting with hands- on experience in the development of individual
More informationSafety (OSHA 10 hour)
Construction Technology Core and Sustainable Construction Subject Code: 178000 Students will learn principles in basic safety (10-hr OSHA), construction math, hand and power tool are and operation, blueprint
More informationCanadian Technology Accreditation Criteria (CTAC) PROGRAM GENERAL LEARNING OUTCOMES (PGLO) Common to all Technologist Disciplines
Canadian Technology Accreditation Criteria (CTAC) PROGRAM GENERAL LEARNING OUTCOMES (PGLO) Common to all Technologist Disciplines Preamble Eight Program General Learning Outcomes (PGLOs) are included in
More informationCAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours
CAYUGA COMMUNITY COLLEGE Division of Natural and Health Sciences, Mathematics and Technology ENGR 126 Computer Aided Design 4 Credit Hours COURSE DESCRIPTION Develop basic drafting skills using microcomputer
More informationTECHNICAL DESIGN I (540)
DESCRIPTION The first assessment in a series, Technical Design I prepares students to develop technical knowledge and skills required to plan and prepare scale pictorial interpretations of engineering
More informationDesign and Manufacturing Curriculum in Industrial Engineering at Mercer University
Design and Manufacturing Curriculum in Industrial Engineering at Mercer University R. Radharamanan 1 Abstract This paper presents an overview of design and manufacturing curriculum in effect at Mercer
More informationA New Approach to Teaching Manufacturing Processes Laboratories
A New Approach to Teaching Manufacturing Processes Laboratories John Farris, Jeff Ray Grand Valley State University Abstract The manufacturing processes laboratory taught in the Padnos School of Engineering
More informationCOLLEGE OF THE DESERT
COLLEGE OF THE DESERT Course Code DRA-001 Course Outline of Record 1. Course Code: DRA-001 2. a. Long Course Title: Technical Drafting I b. Short Course Title: TECHNICAL DRAFTING I 3. a. Catalog Course
More informationGenerics AGEN Assessment Tool. 005 Drawings 001 Basic Drawings. q Competent q Not Yet Competent. Signed: Learner Name: Date: Telephone No.
Generics AGEN 005 001 005 Drawings 001 Basic Drawings Assessment Tool Learner Name: Signed: Telephone No.: Date: Maximal total marks Marks: Obtained marks Total obtained marks in percentage % Learner Is:
More informationSubject Description Form. Industrial Centre Training I for EIE. Upon completion of the subject, students will be able to:
Subject Description Form Subject Code Subject Title Credit Value IC2114 Industrial Centre Training I for EIE 5 training credits Level 2 Pre-requisite/ Co-requisite/ Exclusion Objectives Intended Subject
More informationAMTEC Modules. AMT 102: General PM and Predictive Maintenance AMT 1021: Basic PM AMT 1022: Advanced Technologies
AMT 100: Computer Literacy AMT 1001: Orientation to Computer Systems AMT 1002: Operating Systems AMT 1003: Computer Applications AMT 1004: Internet/Intranet AMT 101: Fluid Power and Electrohydraulics/Pneumatics
More informationEngineering Technologies/Technicians CIP Task Grid Secondary Competency Task List
Secondary Task List 100 ENGINEERING SAFETY. 101 Implement a safety plan. 102 Operate lab equipment according to safety guidelines. 103 Use appropriate personal protective equipment. 104 Comply with OSHA
More informationTECHNOLOGY AND ENGINEERING
Technology & Engineering 9 2 semesters Prerequisite: Freshman standing only. (Four, 9 week segments) Every nine weeks the students will experience a different area of technology. They will study metals,
More informationBID October - Course Descriptions & Standardized Outcomes
BID 2017- October - Course Descriptions & Standardized Outcomes ENGL101 Research & Composition This course builds on the conventions and techniques of composition through critical writing. Students apply
More informationENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours
ENGINEERING TECHNOLOGIES ENGINEERING GRAPHICS & DESIGN/DRAFTING Associate in Applied Science: 75 Credit Hours Prior Learning Assessment Opportunities ETDG 1143 Course Introduction to Design/Drafting ETDG
More informationTechnology Education Department
Department Technology Education The technology education curriculum is designed to provide a balanced mix of theoretical and practical knowledge with an abundant amount of hands-on activities included
More informationEL DORADO UNION HIGH SCHOOL DISTRICT Educational Services. Course of Study Information Page
Course of Study Information Page Course Title: Engineering Design and Architecture I (#0517)(Formerly Drafting 1 #0510) Rationale: This course in Engineering Design will introduce students to the fundamentals
More informationCOURSE SLO REPORT - INDUSTRY AND TECHNOLOGY DIVISION
COURSE SLO REPORT - INDUSTRY AND TECHNOLOGY DIVISION COURSE SLO STATEMENTS - AUTOMATION, ROBOTICS AND MANUFACTURING (ARM) Course ID Course Name Course SLO Title Course SLO Statement 10 10A 10B 12 12A 12B
More informationBIG IDEAS. Personal design interests require the evaluation and refinement of skills. Learning Standards
Ministry of Education Area of Learning: APPLIED DESIGN, SKILLS, AND TECHNOLOGIES Art Metal and Jewellery Grade 12 BIG IDEAS Products can be designed for life cycle. Personal design interests require the
More informationMachine Tool Technology/Machinist CIP Task Grid Secondary Competency Task List
1 100 ORIENTATION / SAFETY 101 Describe the Occupational Safety and Health Administration (OSHA) and its role in the machining industry. 2 2 2 1 0.5 102 Identify & explain safety equipment and procedures.
More informationGUJARAT TECHNOLOGICAL UNIVERSITY
Type of course: Core GUJARAT TECHNOLOGICAL UNIVERSITY BRANCH: Mechanical/Production/Manufacturing Engineering SUBJECT NAME: Computer Aided Manufacturing SUBJECT CODE: 2171903 BE Semester VII Prerequisite:
More informationIndustrial Technology Graphics Technologies
2010 HIGHER SCHOOL CERTIFICATE EXAMINATION Industrial Technology Graphics Technologies Total marks 40 General Instructions Reading time 5 minutes Working time 1 1 hours 2 Write using black or blue pen
More informationCourse Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 Major Concepts to be learned:
Course Title: Mechanical Drawing Topic/Concept: Views Of Objects Time Allotment: 3 6 Weeks Unit Sequence: 1 1. Sketching skills 2. Orthographic projection 3. Visualization of views 4. Location of lines
More informationCOURSE OUTLINE. Course Number Course Title Credits. Co- or Pre-requisite BCT110 Construction Materials & Methods
COURSE OUTLINE Course Number Course Title Credits BCT101 Construction Graphics 3 Hours: 2 Lecture 2 Studio/Lab, Co- or Pre-requisite BCT110 Construction Materials & Methods Implementation sem/year Fall
More informationCNC Lathe Programming-Basic
Western Technical College 31420312 CNC Lathe Programming-Basic Course Outcome Summary Course Information Description Career Cluster Instructional Level Total Credits 1.00 An introduction to planning and
More information