MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES

Size: px
Start display at page:

Download "MECHANICAL ENGINEERING AND DESIGN 2017/18 SEMESTER 1 MODULES"

Transcription

1 Visual Communications ENG_4_542 Tuesday and Wednesday 2pm 4pm (Tues), 9.30am 11.30am (Weds) Students attend both sessions. The module aims a) to develop the capacities of observation and visualisation, b) to develop visual aesthetic and functional awareness c) to communicate design ideas, information, concepts and narratives in visual form through the introduction: - of drawing (observed and creative) - of digital communication skills through the use of 2D graphic software - of principles of digital photography, graphic design, and technical illustration. Introduction to Mechanical ENG_4_411 Monday 3pm 7pm None Introduction to the properties and limitations of engineering materials and an understanding of the fundamental structural characteristics governing these properties. The module also introduces students to the concepts of engineering mechanics and emphasises the relationship between theory and real engineering systems.

2 Inclusive Design and Usability ENG_4_544 Monday and Friday 2pm 5pm (Mon), 10am 1pm (Fri) Students attend both sessions. The module looks at the increasingly important role of energy and environmental factors which are increasingly impacting on buildings, their use, and their occupants. The aim of this module is to develop the students understanding of energy use in the construction and use of a building and the resulting environmental demands.as buildings consume a large proportion of the total energy used in industrial countries, students should be able to evaluate the design implications of poor energy efficiency in terms of cost, environmental impact and legislative consequences. Digital Design and Modelling ENG_4_453 and 2 Wednesday 12pm 2pm None The module provides an introduction to the principles and use of Computer Aided Design techniques and software for Product and design. The module aims to embed fundamental skills for digital modelling and product development in 2d and 3d CAD packages, including solid modelling, surface modelling, rendering, and engineering drawing.

3 SEMESTER: Mathematics B BEA_4_408 Year-Long (Students must be studying abroad for FULL academic year) SEMESTER: Introduction to Mathematics and. This module consolidates the mathematical skills that underpin all the IEng Civil and Product Design engineering degrees. It is specifically designed to cater for the wide differences in mathematical background of students to reach an equivalent an equivalent A-Level Maths and then extending it by introducing the main mathematical techniques which are required in early stages of Civil engineering degrees. This module is delivered over two semesters. Design Methods ENG_4_541 Year-Long (Students must be studying abroad for FULL academic year) UK CREDITS: 40 None The module is an introductory experience for students on the BSc Product Design cluster and covers the majority of practical work to be undertaken at first year level design methods, process and projects. Using design projects as a vehicle, students will cover design methodology, physical prototyping, workshop skills, and an introduction to materials and manufacturing technology.

4 Thermofluids and Dynamics ENG_4_440 Tuesday 4.30pm 7.30pm None This module provides a first study of heat transfer, fluid mechanics, thermodynamics and dynamics. At the end of the module, students will be able to undertake the actions described in each of the six areas below. Science and Mathematics (SM) The students will be able to demonstrate their knowledge of the underlying concepts and principles of Thermofluids, Dynamics and Kinematics covered in the indicative syllabus. (SM1p) Analysis (EA) The student will be able to apply knowledge of the underlying concepts and principles of Thermofluids, Dynamics and Kinematics covered in the indicative syllabus gained to the solve engineering problems. (EA1p, EA3p) Use numerical and analytical skills to solve problems in physical systems in a systematic manner. (EA1p, EA2p, EA3p) Practice (EP) The students will be able to take practical measurements, analyse and critically appraise experimental data, present the results in a written format as a short scientific report. Work with technical uncertainty. (EP3p, EP4p, EP8p, D6p). Introduction to Mechanical and Electronic ENG_4_407 Monday and Friday 1pm - 3pm (Mon) and 12pm - 2pm (Fri) Design Methods The module develops concepts in engineering science relevant for students studying Product Design. The content of the module is split n two sections: mechanical engineering and low voltage electronic engineering content. Although the content is in two sections, it is expected that the teaching method provides an integrated approach to the subject.

5 Introduction to Mechanical and Electronic ENG_4_407 Monday and Friday 1pm - 3pm and 12pm - 2pm Design Methods The module develops concepts in engineering science relevant for students studying Product Design. The content of the module is split in two sections: mechanical engineering and low voltage electronic engineering content. Although the content is in two sections, it is expected that the teaching method provides an integrated approach to the subject. Design Futures and Emerging Technologies ENG_5_548 Tuesday and Thursday 10am pm Advanced Design modules The DF and ET module raises students awareness of new design approaches, emerging technological and scientific research as well as ethical, economic and socio/cultural changes in the society. It enhances students ability to address and think critically about future challenges and emerging technologies. It also explores new design methods to provide opportunities for interdisciplinary projects. Projects will encourage students to be informed by different perspectives, people and disciplines, enabling collaborative exchange of knowledge.

6 Virtual and CAD ENG_5_409 and 2 Thursday 2pm 4.30pm Digital Design and Modelling Introduction to Mechanical and Electronic The module develops advanced Computer Aided Design skills and introduces students to the principles of Computer Aided (CAE) and Computer Aided Manufacture (CAM). To enable students to model complex geometrical forms digitally, and to conduct simple structural analysis and optimisation using commercial FEA software. Students will also learn how to optimise components for a range of digital and traditional manufacturing processes. Mechatronics ENG_5_516 and 2 Tuesday and Friday 9am - 1pm (Tues) and 2pm - 3pm (Fri) Mathematics, and Introduction to Mechanical and Electronic This Module provides an introduction to the interdisciplinary field of mechatronics. It is traced from its origins through the synergistic integration of fine mechanical engineering with electronics and computer control, to modern day products and processes. Particular attention is paid to sensors and actuators, and microcontroller programming. Students will learn by the laboratory experiments about the hardware components and subsystems used in the mechanical and mechatronics control in real engineering applications.

7 Design ENG_5_442 Tuesday and Thursday 4.30pm pm (Tues) and 12pm - 2pm (Thurs) Mechanical Principles, or reasonable equivalent. The theory section of the module is intended to extend the student s understanding and ability of engineering design; enabling them to appropriately select and then apply established design theory, alongside product development and prototyping techniques, to produce comprehensive solutions to engineering problems. It will also provide an introduction to sustainability and sustainable design (to be covered in greater detail in the Sustainability section). The Design Communication portion of the module develops the students understanding, awareness and ability to communicate the design intent, manufacturing information and relevant design documentation to the appropriate audiences. 3D CAD is used as a primary tool to undertake investigation of the design at the premanufacturing stage. Similarly FEA is introduced as an essential tool for the evaluation and validation of design ideas. Design Thinking and Applications ENG_5_546 and 2 Monday and Friday 10am - 12pm (Mon) and 10am - 1pm (Fri) Design Contexts and Communications. Working knowledge of CAD. The module will build on the experience in the first year Design thinking and practice and other first year modules and aims to develop design thinking methodology and product development practice for the placement (sandwich) year and the final year projects. The module will aim to allow students to experience a thorough range of design process cycles and develop various resolution prototypes in relation to the weighting of the assignments and they will need to reflect on the increasing diversity in product, service, interaction design and design thinking as a component of business development.

8 Dynamics and System Modelling ENG_6_451 and 2 Friday 9am 1pm UK LEVEL: 6 This module introduces the student to advanced dynamical systems theory. This involves mathematical modelling of engineering systems using both Newtonian and Lagrangian approaches. The module includes investigative work into mechanical systems using computer software and laboratory experiments. Digital Visualisation and CAD ENG_5_551 Thursday 2pm 4.30pm Digital Design and Modelling The module develops advanced Computer Aided Design skills and introduces students to the principles of Computer Aided Manufacture (CAM), and communication and demonstration of these ideas through photo-realistic rendering, and digital animations.

9 Solid Mechanics and FEA ENG_5_443 Introduction to Mechanical & Computing This module provides new concepts in the deformation of materials under different loading conditions and extends the application of fundamental principles of solid mechanics to more advanced systems. It builds on knowledge from Introduction to Mechanical. The module also provides basic concepts and principles of the finite element analysis (FEA) techniques and the application of FEA to structural and stress analysis. Thermofluids and Sustainable Energy ENG_5_446 Thermofluids and Dynamics This module provides a second study of heat transfer, fluid mechanics and thermodynamics exploring more theory to allow industrial level analysis of processes. The scope includes an appreciation of fuels/combustion, power-producing cycles, internal/external fluid flows and further heat transfer.

10 Introduction to Electrical and Electronic ENG_4_404 Monday 1pm 3pm None The material in this unit is covers the essential material relevant to the fundamentals of both electrical and electronic engineering. Starting with basic circuit elements, Ohm s Law and Kirchhoff s Law the first half of the module introduces basic and more advanced circuit analysis techniques such as Node Voltage and Mesh Current methods. Progressing onto Source Transformation techniques and the basics of semiconductors (Diodes and BJTs). Then, the Electrical part covers DC responses of RC, RL and RLC circuits & finally AC sinusoidal circuit theory and power systems and three phase circuits. Introduction to Chemical and Petroleum ENG_4_470 Monday and Tuesday 9am - 11am and 1pm - 2pm (Mon) and 12pm - 1pm (Tues) Introduction to Maths and Chemistry. Students attend all sessions. This module provides an introduction to the scope and nature of the chemical and petroleum industries, the role of professional engineers within these industries and key technical concepts underpinning chemical and petroleum engineering. Students will develop an understanding of these industries and the career pathways available to them. Key concepts in process analysis and resource utilisation will be introduced and the properties and chemistry of major industrial chemicals and petroleum products will be studied.

11 Principles ENG_4_402 Monday and Tuesday Lecture: 3pm - 5pm (Mon) OR 3pm - 5pm (Thurs), 1pm - 2pm (Weds), 12pm - 1pm (Tues) None This module develops the students understanding of essential scientific principles for the study of engineering to degree level. It is designed to be accessible to students with a wide range of prior science specialisation. The module comprises two blocks of study. These introduce the principles of measurement systems and units, thermal physics, mechanical and electrical principles. The students will be broken down into 2 lecture streams. There will also be 6 tutorial streams. The module will be taught through a combination of lectures (2 hours/week) and problem-setting tutorials (2 hours/week). The course material will be supplemented by additional reading and practice problems posted on Moodle and links to useful internet sources. Applications across the various engineering disciplines will be introduced in lectures and developed via problemsolving tutorial exercises. Mathematics and Modelling ENG_4_401 and 2 Monday 9am 12pm Advanced Mathematics Classes. This module consolidates the mathematical skills that underpin the BEng engineering degrees. It is specifically designed to cater for the wide differences in mathematical background of 1st year London South Bank students, as well as to prepare students for the Advanced Mathematics and Modelling module taken in the 2nd year.

12 Design and Practice ENG_4_403 and 2 None The common module is for all undergraduate year one engineering students. It covers core study skills subjects for engineering students. The module covers the following material: Design activities, team work, creative problem solving, project management, sustainable development principles, personal development planning, report writing communication, Computer-Aided Design (CAD), employability and transferable skills. Advanced Mathematics BEA_5_415 Tuesday 11am 1pm for Mathematics or reasonable equivalent The Study Abroad Team are awaiting this module guide. For further information on this module please contact your provider, or the study abroad team.

13 Design Contexts and Communications ENG_5_547 Tuesday 2 4pm Design Methods, Visual Communications, & Digital Design and Modelling The module will enhance fundamental employability skills for a graduate in the contemporary design industry. It builds on the concepts that were introduced in level 4 modules, with a view to creation of a professional portfolio that reflects the design capabilities of the student, in order to leave them in a strong position for gaining a work placement and/or graduate employment. Innovation and Enterprise ENG_6_422 Thursday 9am 12pm UK LEVEL: 6 Introduction to The module forms part of the common curriculum for the University. It is intended to be practical, with students developing some appropriate ideas of their own in such a way that they recognise aspects influencing how they could become practical, profitable propositions. Students will practice ways of finding ideas, testing those ideas and developing them. They will investigate project management, business strategies, risk assessments and business simulations so that they can understand the commercial viability of their ideas. One of the assignments will require students working in groups typically to investigate hot topics for innovation and devise plans to deliver one of them. Hot topics in engineering are likely to be those topics that deal with issues such as energy usage, sustainability, water supply, accidents, safety, ethical concerns such as fracking or intellectual property, and professional issues such as pay for engineers, discrimination in the workplace etc. The other assignment also working in groups - will consist of investigating an existing engineering or design company (associated to their discipline) with the aim of completing a Business Model Canvas to illustrate the structure and interrelated business functions which exist in the types of businesses they are likely to encounter when leaving university. Topics students will experience will include project management, intellectual property, market research, market placement, advertising and finance. On their e-portfolio site students are expected to provide weekly e-journal entries and regular reflections on provided content and specific topical projects.

14 Design and Culture ENG_6_554 Monday 10am 1pm UK LEVEL: 6 Design Contexts and Communications, or reasonable equivalent. In this module final year students engage in primary and secondary source research to investigate and critically analyse a subject related to the profession and practice of Product Design in order to produce a well written and illustrated dissertation that broadens their understanding of the various factors that influence the design process and profession. Advanced Mathematics and Modelling ENG_5_410 and 2 Mathematics and Modelling or equivalent This module covers undergraduate advanced engineering mathematics to enable students to consider and model a variety of relevant engineering problems (e.g. electrical, mechanical, petroleum, chemical, and computer). The assessment has 2 exams (one after S1 and one after S2)

15 Solid Mechanics and FEA ENG_5_443 Introduction to Mechanical & Computing This module provides new concepts in the deformation of materials under different loading conditions and extends the application of fundamental principles of solid mechanics to more advanced systems. It builds on knowledge from Introduction to Mechanical. The module also provides basic concepts and principles of the finite element analysis (FEA) techniques and the application of FEA to structural and stress analysis. Thermofluids and Sustainable Energy ENG_5_446 Thermofluids and Dynamics This module provides a second study of heat transfer, fluid mechanics and thermodynamics exploring more theory to allow industrial level analysis of processes. The scope includes an appreciation of fuels/combustion, power-producing cycles, internal/external fluid flows and further heat transfer.

16 Portfolio Design Projects ENG_6_556 UK LEVEL: 6 All BSc first and second year EPD or PD modules or equivalent. This module will develop students professional skills and portfolio in preparation for a career as a Design Engineer. Students will apply knowledge and understanding of a range of Design principles and techniques, using appropriate theoretical and practical methods to the analysis and solution of engineering design problems, exploring design alternatives and understanding the implications of trade-offs in the design process. They will learn how to prototype and implement their proposed solutions using appropriate digital manufacturing technologies. In addition to this there will be significant content relating to management of the design process, presentation of ideas, and working in teams. Research Methods for Design Projects ENG_6_552 UK LEVEL: 6 Design Thinking and Applications; Design and Manufacture Project PD or equivalent In this module students identify a suitable subject for their Product Design / Design Project; they then develop a project brief and work plan, which are presented visually and verbally in addition to their preliminary contextual research and justification for the proposed Project. Students also develop brand identity for the Design Degree Show, which may be pitched to experts and/or design professionals.

17 Portfolio Projects ENG_6_416 UK LEVEL: 6 Solid Mechanics and FE This module will develop students professional skills and portfolio in preparation for a career as a Design Engineer. Students will apply knowledge and understanding of a range of Design principles and techniques, using appropriate theoretical and practical methods to the analysis and solution of engineering design problems, exploring design alternatives and understanding the implications of trade-offs in the design process. They will learn how to prototype and implement their proposed solutions using appropriate digital manufacturing technologies. In addition to this there will be significant content relating to management of the design process, presentation of ideas, and working in teams.

(Tu) 9-12, (W) 1-3 (Th) (M) 12-4, (Th) Clashes with Study Abroad modules.

(Tu) 9-12, (W) 1-3 (Th) (M) 12-4, (Th) Clashes with Study Abroad modules. Department Module Title Module Code Semester Indicative Day Indicative Timeslot Description Of Module UK Level This is an interactive, inter-disciplinary module which requires student Choose one of participation

More information

Programme Specification

Programme Specification Programme Specification Title: Electrical Engineering (Power and Final Award: Master of Engineering (MEng (Hons)) With Exit Awards at: Certificate of Higher Education (CertHE) Diploma of Higher Education

More information

MSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014

MSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014 Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Chemical and Petroleum Engineering Academic Year: 2017-18 Degree Awarding Body: University of Bradford

More information

BSc in Music, Media & Performance Technology

BSc in Music, Media & Performance Technology BSc in Music, Media & Performance Technology Email: jurgen.simpson@ul.ie The BSc in Music, Media & Performance Technology will develop the technical and creative skills required to be successful media

More information

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies

Years 9 and 10 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

For the Malaysia Engineering Accreditation Council (EAC), the programme outcomes for the Master of Engineering (MEng) in Civil Engineering are:

For the Malaysia Engineering Accreditation Council (EAC), the programme outcomes for the Master of Engineering (MEng) in Civil Engineering are: Programme Outcomes The Civil Engineering department at the University of Nottingham, Malaysia considers and integrates the programme outcomes (POs) from both the Malaysia Engineering Accreditation Council

More information

Science and mathematics

Science and mathematics Accreditation of HE Programmes (AHEP): Collated learning outcomes for six areas of learning Programmes accredited for IEng Engineering is underpinned by science and mathematics, and other associated disciplines,

More information

BA (Hons) Photography Length of Course

BA (Hons) Photography Length of Course Programme Specification Every taught course of study leading to a UAL award is required to have a Programme Specification. This summarises the course aims, learning outcomes, teaching, learning and assessment

More information

Category Code Description. Science and mathematics

Category Code Description. Science and mathematics SM1i SM1p SM1m SM1fl SM2i SM2p SM2m SM2fl SM3p SM3m SM3fl SM4m SM5m SM6m EA1i EA1p EA1m EA1fl Knowledge and understanding of the scientific principles underpinning relevant current technologies, and their

More information

G9 - Engineering Council AHEP Competencies for IEng and CEng

G9 - Engineering Council AHEP Competencies for IEng and CEng G9 - Career Learning Assessment (CLA) is an alternative means of gaining Engineering Council Registration at either Incorporated Engineer (IEng) or Chartered Engineering (CEng) status. IAgrE encourages

More information

PROGRAM STRUCTURE AND CONTENT: OVERVIEW

PROGRAM STRUCTURE AND CONTENT: OVERVIEW MA IN ART BUSINESS The Master s Degree in Art Business, launched in 1998, offers a unique opportunity to study the art market right at the hub of the cultural and commercial art world: London. It provides

More information

in the New Zealand Curriculum

in the New Zealand Curriculum Technology in the New Zealand Curriculum We ve revised the Technology learning area to strengthen the positioning of digital technologies in the New Zealand Curriculum. The goal of this change is to ensure

More information

Design, Technology and Engineering

Design, Technology and Engineering BOARD-ACCREDITED, PRE-EDITED DRAFT Design, Technology and Engineering 2020 Subject Outline Stage 1 and Stage 2 This subject outline has been accredited. It is provided in draft, pre-edited form for planning

More information

EAB Engineering Accreditation Board

EAB Engineering Accreditation Board EAB Engineering Accreditation Board Appendix B: Specified Learning Outcomes Summary of Engineering Council Output Statements Specific Learning Outcomes Knowledge is information that can be recalled. Understanding

More information

Academic Course Description. BHARATH University Faculty of Engineering and Technology Department of Electrical and Electronics Engineering

Academic Course Description. BHARATH University Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE101- Basic Electrical and Electronics Engineering Academic Course Description BHARATH University Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BEE101 Basic

More information

Design and Technology Subject Outline Stage 1 and Stage 2

Design and Technology Subject Outline Stage 1 and Stage 2 Design and Technology 2019 Subject Outline Stage 1 and Stage 2 Published by the SACE Board of South Australia, 60 Greenhill Road, Wayville, South Australia 5034 Copyright SACE Board of South Australia

More information

STUDENT FOR A SEMESTER SUBJECT TIMETABLE MAY 2018

STUDENT FOR A SEMESTER SUBJECT TIMETABLE MAY 2018 Bond Business School STUDENT F A SEMESTER SUBJECT TIMETABLE MAY 2018 SUBJECT DESCRIPTION Accounting for Decision Making ACCT11-100 This subject provides a thorough grounding in accounting with an emphasis

More information

STUDENT FOR A SEMESTER SUBJECT TIMETABLE JANUARY 2018

STUDENT FOR A SEMESTER SUBJECT TIMETABLE JANUARY 2018 Bond Business School STUDENT F A SEMESTER SUBJECT TIMETABLE JANUARY 2018 SUBJECT DESCRIPTION Accounting for Decision Making ACCT11-100 This subject provides a thorough grounding in accounting with an emphasis

More information

Mission Statement: Department: Engineering Technology Department Assessment coordinator: Todd Morton

Mission Statement: Department: Engineering Technology Department Assessment coordinator: Todd Morton Department: Engineering Technology Department Assessment coordinator: Todd Morton Mission Statement: The principal mission of the Engineering Technology Department is to provide the highest quality education

More information

DESIGN & CREATIVE TECHNOLOGIES FINAL EXAM TIMETABLE SEMESTER

DESIGN & CREATIVE TECHNOLOGIES FINAL EXAM TIMETABLE SEMESTER Wednesday 24 October DESIGN & CREATIVE TECHNOLOGIES FINAL EXAM TIMETABLE SEMESTER 2 2018 PHOTO ID IS REQUIRED FOR ALL EXAMINATIONS The Exam Timetable is subject to change, please check back regularly for

More information

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies

Years 5 and 6 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Accreditation Requirements Mapping

Accreditation Requirements Mapping Accreditation Requirements Mapping APPENDIX D Certain design project management topics are difficult to address in curricula based heavily in mathematics, science, and technology. These topics are normally

More information

EPD ENGINEERING PRODUCT DEVELOPMENT

EPD ENGINEERING PRODUCT DEVELOPMENT EPD PRODUCT DEVELOPMENT PILLAR OVERVIEW The following chart illustrates the EPD curriculum structure. It depicts the typical sequence of subjects. Each major row indicates a calendar year with columns

More information

Faculty of Engineering Undergraduate Prospectus 2017/2018

Faculty of Engineering Undergraduate Prospectus 2017/2018 Faculty of Engineering Undergraduate Prospectus 2017/2018 Call 19(BUE) 19283 El Sherouk City, Cairo, Egypt www.bue.edu.eg 1.0 THE FACULTY OF ENGINEERING 1.1 Undergraduate Programmes The Engineering undergraduate

More information

Tuning-CALOHEE Assessment Frameworks for the Subject Area of CIVIL ENGINEERING The Tuning-CALOHEE Assessment Frameworks for Civil Engineering offers

Tuning-CALOHEE Assessment Frameworks for the Subject Area of CIVIL ENGINEERING The Tuning-CALOHEE Assessment Frameworks for Civil Engineering offers Tuning-CALOHEE Assessment Frameworks for the Subject Area of CIVIL ENGINEERING The Tuning-CALOHEE Assessment Frameworks for Civil Engineering offers an important and novel tool for understanding, defining

More information

MEDIA AND INFORMATION

MEDIA AND INFORMATION MEDIA AND INFORMATION MI Department of Media and Information College of Communication Arts and Sciences 101 Understanding Media and Information Fall, Spring, Summer. 3(3-0) SA: TC 100, TC 110, TC 101 Critique

More information

COURSE MODULES LEVEL 3.1 & 3.2

COURSE MODULES LEVEL 3.1 & 3.2 COURSE MODULES LEVEL 3.1 & 3.2 6-Month Internship The six-month internship provides students with the opportunity to apply the knowledge acquired in the classroom to work situations, and demonstrate problem

More information

English National Curriculum Key Stage links to Meteorology

English National Curriculum Key Stage links to Meteorology English National Curriculum Key Stage links to Meteorology Subject KS1 (Programme of Study) links KS2 (Programme of Study) links KS3 (National Curriculum links) KS4 (National Curriculum links) Citizenship

More information

Mechanical Engineering

Mechanical Engineering Mechanical Engineering 1 Mechanical Engineering Degree Awarded Bachelor of Science in Mechanical Engineering Nature of Program Mechanical engineering is one of the largest technical professions with a

More information

Academic Course Description. BEE301 Circuit Theory Third Semester, (Odd Semester)

Academic Course Description. BEE301 Circuit Theory Third Semester, (Odd Semester) BEE301- Circuit Theory Academic Course Description BHARATH University Faculty of Engineering and Technology Department of Electronics and Communication Engineering BEE301 Circuit Theory Third Semester,

More information

TECHNOLOGY, ARTS AND MEDIA (TAM) CERTIFICATE PROPOSAL. November 6, 1999

TECHNOLOGY, ARTS AND MEDIA (TAM) CERTIFICATE PROPOSAL. November 6, 1999 TECHNOLOGY, ARTS AND MEDIA (TAM) CERTIFICATE PROPOSAL November 6, 1999 ABSTRACT A new age of networked information and communication is bringing together three elements -- the content of business, media,

More information

Engineering Principals I (601)

Engineering Principals I (601) DESCRIPTION The first in a sequence of hands on courses that tie observations and concepts common to a variety of different engineering disciplines in order to develop a better understanding of basic math

More information

Candidate 1 Portfolio (Graphic Communication)

Candidate 1 Portfolio (Graphic Communication) Candidate 1 Candidate 1 Portfolio (Graphic Communication) Candidate 1 Portfolio (Graphic Communication ) Candidate 1 Portfolio (Graphic Communication) Candidate 1 Candidate 1 Portfolio (Graphic Communication)

More information

GENE 123: Electrical Engineering ME 123: Electrical Engineering for Mechanical Engineers

GENE 123: Electrical Engineering ME 123: Electrical Engineering for Mechanical Engineers Department of Electrical and Computer Engineering GENE 123: Electrical Engineering ME 123: Electrical Engineering for Mechanical Engineers TEACHING TEAM: Spring Term 2003 Instructors Name Class Office

More information

Programme Specification

Programme Specification Programme Specification Title: Bachelor of Final Award: Bachelor of (BArch Hons) With Exit Awards at: Certificate of Higher Education (CertHE) Diploma of Higher Education (DipHE) To be delivered from:

More information

B.TECH(MECHANICAL) -SEDA

B.TECH(MECHANICAL) -SEDA B.TECH(MECHANICAL) -SEDA PROGRAMME EDUCATIONAL OBJECTIVES: PEO1 PEO2 PEO3 PEO4 PEO5 Will be equipped with sound knowledge of mathematics, science and technology useful to build complex mechanical engineering

More information

06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics

06 March Day Date All Streams. Thursday 03 May 2018 Engineering Mathematics II. Saturday 05 May 2018 Engineering Physics / SCHOOL OF TECHNOLOGY MANAGEMENT &ENGINEERING FINAL EXAMINATION TIME TABLE (ACADEMIC YEAR: 2017 18) MASTER OF BUSINESS ADMINISTRATION IN TECHNOLOGY MANAGEMENT (2017-22) YEAR: I, SEMESTER: II CAMPUS: MUMBAI,

More information

BID October - Course Descriptions & Standardized Outcomes

BID October - Course Descriptions & Standardized Outcomes BID 2017- October - Course Descriptions & Standardized Outcomes ENGL101 Research & Composition This course builds on the conventions and techniques of composition through critical writing. Students apply

More information

PROGRAMME SYLLABUS Sustainable Building Information Management (master),

PROGRAMME SYLLABUS Sustainable Building Information Management (master), PROGRAMME SYLLABUS Sustainable Building Information Management (master), 120 Programmestart: Autumn 2017 School of Engineering, Box 1026, SE-551 11 Jönköping VISIT Gjuterigatan 5, Campus PHONE +46 (0)36-10

More information

BACHELOR OF FINE ARTS IN PAINTING AND DRAWING

BACHELOR OF FINE ARTS IN PAINTING AND DRAWING BFA BACHELOR OF FINE ARTS IN PAINTING AND DRAWING The major is an integrated disciplinary track that provides students the resources to explore the dynamic, eclectic practice of contemporary drawing and

More information

Years 9 and 10 standard elaborations Australian Curriculum: Digital Technologies

Years 9 and 10 standard elaborations Australian Curriculum: Digital Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Level 3 Certificate in Design and Craft

Level 3 Certificate in Design and Craft Level 3 Certificate in Design and Craft 7716-80 Picture and frame restoration Qualification handbook www.cityandguilds.com November 2009 Version 1.0 Candidate name City & Guilds registration number Centre

More information

Engineering, & Mathematics

Engineering, & Mathematics 8O260 Applied Mathematics for Technical Professionals (R) 1 credit Gr: 10-12 Prerequisite: Recommended prerequisites: Algebra I and Geometry Description: (SGHS only) Applied Mathematics for Technical Professionals

More information

Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering. TRAINING PROGRAM Mechatronic Engineering MSc. Budapest, 01 September 2017.

Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering. TRAINING PROGRAM Mechatronic Engineering MSc. Budapest, 01 September 2017. Óbuda University Donát Bánki Faculty of Mechanical and Safety Engineering TRAINING PROGRAM Mechatronic Engineering MSc Budapest, 01 September 2017. MECHATRONIC ENGINEERING DEGREE PROGRAM CURRICULUM 1.

More information

Higher National Unit specification: general information

Higher National Unit specification: general information Higher National Unit specification: general information Unit code: H17R 35 Superclass: CB Publication date: March 2012 Source: Scottish Qualifications Authority Version: 01 Unit purpose This Unit is designed

More information

Pearson BTEC Level 3 Nationals External Assessment

Pearson BTEC Level 3 Nationals External Assessment Pearson BTEC Level 3 Nationals External Assessment Examination Timetable for Paper-based examinations and Set Tasks Summer 2018 FINAL For more information on BTEC qualifications please visit http://qualifications.pearson.com

More information

UNIVERSITY FACULTY OF. State of the

UNIVERSITY FACULTY OF. State of the 530577 TEMPUS 1 2012 1 RS TEMPUS JPCR http:// /iprod.masfak.ni.ac.rs iprod@ @masfak.ni.ac.rs Work package WP1: 1.2 REPORT UNIVERSITY OF KRAGUJEVAC FACULTY OF ENGINEERING State of the product development

More information

Faculty of Humanities and Social Sciences

Faculty of Humanities and Social Sciences Faculty of Humanities and Social Sciences University of Adelaide s, Indicators and the EU Sector Qualifications Frameworks for Humanities and Social Sciences University of Adelaide 1. Knowledge and understanding

More information

GRAPHIC DESIGN (ARTGR)

GRAPHIC DESIGN (ARTGR) Graphic Design (ARTGR) 1 GRAPHIC DESIGN (ARTGR) Courses primarily for undergraduates: ARTGR 270: Graphic Design Studio I F. Prereq: DSN S 102, DSN S 131 and enrollment in ARTGR 275; admission to the graphic

More information

DFTG Blueprint Reading and Sketching

DFTG Blueprint Reading and Sketching Course Syllabus DFTG 1325 - Blueprint Reading and Sketching Catalog Description: An introduction to reading and interpreting working drawings for fabrication processes and associated trades. Use of sketching

More information

YEAR 7 & 8 THE ARTS. The Visual Arts

YEAR 7 & 8 THE ARTS. The Visual Arts VISUAL ARTS Year 7-10 Art VCE Art VCE Media Certificate III in Screen and Media (VET) Certificate II in Creative Industries - 3D Animation (VET)- Media VCE Studio Arts VCE Visual Communication Design YEAR

More information

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies

Years 3 and 4 standard elaborations Australian Curriculum: Design and Technologies Purpose The standard elaborations (SEs) provide additional clarity when using the Australian Curriculum achievement standard to make judgments on a five-point scale. They can be used as a tool for: making

More information

Design Methodology. Šimon Kovář

Design Methodology. Šimon Kovář Design Methodology Šimon Kovář Schedule of lectures Schedule of lectures General information on the methodology of designing The main task of engineers is to apply their scientific and engineering knowledge

More information

BS in. Electrical Engineering

BS in. Electrical Engineering BS in Electrical Engineering Program Objectives Habib University s Electrical Engineering program is designed to impart rigorous technical knowledge, combined with hands-on experiential learning and a

More information

CENTER OF DESIGN AND CONSTRUCTION SCIENCES UNDERGRADUATE DEGREE IN GRAPHIC DESIGN

CENTER OF DESIGN AND CONSTRUCTION SCIENCES UNDERGRADUATE DEGREE IN GRAPHIC DESIGN CENTER OF DESIGN AND CONSTRUCTION SCIENCES UNDERGRADUATE DEGREE IN GRAPHIC DESIGN OBJECTIVE To train undergraduate professionals in Graphic Design, within the values of humanistic culture; able to solve

More information

fashion creatives ashion DEEPENING SPECIALIZATION Pathway Mapping CREATIVE WRITING TREND SPOTTING & REPORTING SEM III SEM ADVERTISING & COPY SEM V

fashion creatives ashion DEEPENING SPECIALIZATION Pathway Mapping CREATIVE WRITING TREND SPOTTING & REPORTING SEM III SEM ADVERTISING & COPY SEM V ADVERTISING & COPY VI Fashion Creatives refers to the effective communication and presentation of fashion ideas using text, visual, and multimedia content. This programme will equip students with comprehensive

More information

GRAPHIC. Educational programme

GRAPHIC. Educational programme 2 GRAPHIC. Educational programme Graphic design Graphic Design at EASD (Valencia College of Art and Design), prepares students in a wide range of projects related to different professional fields. Visual

More information

MECHANICAL ENGINEERING

MECHANICAL ENGINEERING Kaunas University of Technology Faculty of Mechanical and Mechatronics MASTER STUDY PROGRAMME MECHANICAL ENGINEERING Assoc. Prof. Kęstutis Pilkauskas Faculty of Mechanical and Mechatronics The Faculty

More information

Art at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6

Art at Cox Green Curriculum Plan. Key Stage 4 Year 9 Term I Term 2 Term 3 Term 4 Term 5 Term 6 Term 6 (Early rotation) Introductory module 1. Drawing, painting and colour theory. Study Analysis and annotation. Research. Critical and contextual studies. The formal Observational drawing skills: Line,

More information

Design and technology

Design and technology Design and technology Programme of study for key stage 3 and attainment target (This is an extract from The National Curriculum 2007) Crown copyright 2007 Qualifications and Curriculum Authority 2007 Curriculum

More information

Baccalaureate Program of Sustainable System Engineering Objectives and Curriculum Development

Baccalaureate Program of Sustainable System Engineering Objectives and Curriculum Development Paper ID #14204 Baccalaureate Program of Sustainable System Engineering Objectives and Curriculum Development Dr. Runing Zhang, Metropolitan State University of Denver Mr. Aaron Brown, Metropolitan State

More information

GRAPHIC DESIGN (ARTGR)

GRAPHIC DESIGN (ARTGR) Iowa State University 2016-2017 1 GRAPHIC DESIGN (ARTGR) Courses primarily for undergraduates: ARTGR 270: Graphic Design Studio I F. Prereq: DSN S 102, DSN S 131 and enrollment in ARTGR 275; admission

More information

Course code Title Description Type

Course code Title Description Type 1st Semester 3М11OP01 3M21OM01 3M22OM01 3M23IND01 Mathematics for engineering Technical mechanics Materials and joining techniques Graphical communication 3M31IND01 Industrial design 1 Introduction to

More information

2014 New Jersey Core Curriculum Content Standards - Technology

2014 New Jersey Core Curriculum Content Standards - Technology 2014 New Jersey Core Curriculum Content Standards - Technology Content Area Standard Strand Grade Level bands Technology 8.2 Technology Education, Engineering, Design, and Computational Thinking - Programming:

More information

UNDERGRADUATE DEGREE TRANSPORT DESIGN. Study Plan. Syllabus

UNDERGRADUATE DEGREE TRANSPORT DESIGN. Study Plan. Syllabus UNDERGRADUATE DEGREE TRANSPORT DESIGN Study Plan Syllabus Formula Student, Mariano Suñé in collaboration with UPC. TRANSPORT DESIGN Undergraduate Degree Official University Degrees lasting four years (240

More information

Programme Specification

Programme Specification Programme Specification Title: Social Policy and Sociology Final Award: Bachelor of Arts with Honours (BA (Hons)) With Exit Awards at: Certificate of Higher Education (CertHE) Diploma of Higher Education

More information

MA User Experience Design Programme Specification 2018/19

MA User Experience Design Programme Specification 2018/19 MA User Experience Design Programme Specification 2018/19 APPROVED Course AOS Code 05306 No. of Terms 4 FHEQ Level Level 7 Masters QAA Subject Benchmark Art and Design Course Credits 180 Term Duration

More information

Programme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering

Programme Specifications B. Tech. Programme Programme: Mechanical Engineering Department: Mechanical and Manufacturing Engineering Programme Specifications B. Tech. Programme Programme: Mechanical Department: Mechanical and Manufacturing Faculty of & Technology M. S. Ramaiah University of Applied Sciences University House, New BEL

More information

250 Introduction to Applied Programming Fall. 3(2-2) Creation of software that responds to user input. Introduces

250 Introduction to Applied Programming Fall. 3(2-2) Creation of software that responds to user input. Introduces MEDIA AND INFORMATION MI Department of Media and Information College of Communication Arts and Sciences 101 Understanding Media and Information Fall, Spring, Summer. 3(3-0) SA: TC 100, TC 110, TC 101 Critique

More information

DESIGN gold.ac.uk/design Undergraduate 1 2

DESIGN gold.ac.uk/design Undergraduate 1 2 DESIGN gold.ac.uk/design Undergraduate 1 2 INTRODUCTION Design at Goldsmiths is ranked in the world s best: 1st in the UK for the second year running (The Guardian University Guide 2017 league tables)

More information

Module Catalogue Faculty of Architecture and the Built Environment Undergraduate Study Abroad 2018/9 Semester 2

Module Catalogue Faculty of Architecture and the Built Environment Undergraduate Study Abroad 2018/9 Semester 2 Module Catalogue Faculty of Architecture and the Built Environment Undergraduate Study Abroad 018/9 Westminster Electives These modules are cross-disciplinary in nature and have been co-created with students

More information

Submissions for Art, Craft and Design should aim to present evidence of the following in order to meet assessment objective requirements.

Submissions for Art, Craft and Design should aim to present evidence of the following in order to meet assessment objective requirements. GCE AS ART AND DESIGN UNIT ONE PERSONAL CREATIVE ENQUIRY GUIDANCE: INDICATIVE CONTENT FOR ART AND DESIGN (ART, CRAFT AND DESIGN) four assessment objectives. Teachers may refer to this indicative content

More information

Praxis Technology Education (5051) Study Plan Description of content

Praxis Technology Education (5051) Study Plan Description of content Page 1 I. Technology and Society (15%) A. Understands the nature of technology, technology education, and technological literacy B. Understands how invention and innovation occur, how they are influenced

More information

AWQ 30 Photography - Grade 11 Open McEwan

AWQ 30 Photography - Grade 11 Open McEwan AWQ 30 Photography - Grade 11 Open McEwan Course Description: This course focuses on studio activities in one or more of the visual arts, including drawing, painting, sculpture, photography, printmaking,

More information

THE UNIVERSITY OF MANCHESTER Undergraduate Programme Specification

THE UNIVERSITY OF MANCHESTER Undergraduate Programme Specification 1. GENERAL INFORMATION UCAS Award Programme Title Duration Mode of study V610 BA Hons BA in Theology 3 Years Full-Time UG Diploma Diploma in Theology 2 Years Full-Time (Exit Award only) UG Certificate

More information

Programme Specification

Programme Specification Programme Specification Awarding Body/Institution Teaching Institution QMUL and Beijing University of Posts and Telecoms (BUPT) QMUL and BUPT Name of Final Award and Programme Title BSc(Eng) Telecommunications

More information

Computer-Aided Drafting and Design Technology, A.A.S.

Computer-Aided Drafting and Design Technology, A.A.S. Johnson County Community College 1 Computer-Aided Drafting and Design Technology, A.A.S. Drafting technicians are engineering communication specialists who apply mathematics, computer applications and

More information

Black & White Photography Course Syllabus

Black & White Photography Course Syllabus Black & White Photography Course Syllabus Course Information ARTS 3371.001 Black & White Photography, FALL 2015 THURSDAY 1 3:45 ATC 2.908 (3.904) Professor Contact Information Dr. Diane Durant durant@utdallas.edu

More information

EE (3L-1.5P) Analog Electronics Department of Electrical and Computer Engineering Fall 2015

EE (3L-1.5P) Analog Electronics Department of Electrical and Computer Engineering Fall 2015 EE 221.3 (3L-1.5P) Analog Electronics Department of Electrical and Computer Engineering Fall 2015 Description: Introduction to solid state electronics. Emphasis is on circuit design concepts with extensive

More information

Cabrillo College Catalog

Cabrillo College Catalog ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Program Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment

More information

BA Interaction Design Arts Programme Specification 2018/19

BA Interaction Design Arts Programme Specification 2018/19 BA Interaction Design Arts Programme Specification 2018/19 APPROVED Course AOS Code 10250 No. of Blocks 6 FHEQ Level Level 6 Degree QAA Subject Benchmark Art and Design Course Credits 360 Block Duration

More information

Preview Day Preview Day 2018

Preview Day Preview Day 2018 Engineering Begins Here! Students building their foundation to create the future Engineering Begins Here! Brett Hamlin, Assistant Chair and Faculty, Engineering Fundamentals Amy Monte, Academic Advisor

More information

Information and Communication Technology

Information and Communication Technology Information and Communication Technology Academic Standards Statement We've arranged a civilization in which most crucial elements profoundly depend on science and technology. Carl Sagan Members of Australian

More information

CENTER OF BASICS SCIENCE ELECTRONIC ENGINEER (Curriculum 2012)

CENTER OF BASICS SCIENCE ELECTRONIC ENGINEER (Curriculum 2012) OBJECTIVE To form professionals in the electronics engineer field in order to design, implement and keep digital and computer systems, automation systems and mechatronics and communications systems, supporting

More information

CAD RESIDENTIAL AND COMMERCIAL DRAFTING WITH CADD 3 Semester Hours

CAD RESIDENTIAL AND COMMERCIAL DRAFTING WITH CADD 3 Semester Hours FALL 2014 Course Syllabus CAD 210-01 RESIDENTIAL AND COMMERCIAL DRAFTING WITH CADD 3 Semester Hours Faculty: Donald Nicholson, Technology Department Head Telephone: 410-334-2828 E-mail: dnicholson@worwic.edu

More information

Pearson BTEC Level 3 Nationals External Assessment

Pearson BTEC Level 3 Nationals External Assessment Pearson BTEC Level 3 Nationals External Assessment Examination Timetable for Paper-based examinations and Set Tasks Summer 2019 PROVISIONAL For more information on BTEC qualifications please visit http://qualifications.pearson.com

More information

AS ART AND DESIGN COMPONENT PERSONAL CREATIVE ENQUIRY

AS ART AND DESIGN COMPONENT PERSONAL CREATIVE ENQUIRY AS ART AND DESIGN COMPONENT PERSONAL CREATIVE ENQUIRY GUIDANCE: INDICATIVE CONTENT FOR ART AND DESIGN (ART, CRAFT AND DESIGN) four assessment objectives. Teachers may refer to this indicative content for

More information

Programme Title: BSc (Hons) Business Management (Full Time and Part Time) On Campus Division. URL None

Programme Title: BSc (Hons) Business Management (Full Time and Part Time) On Campus Division. URL None Programme Specification Programme Title: BSc (Hons) Business (Full Time and Part Time) Awarding Institution: Teaching Institution: Division and/or Faculty/Institute: Professional accreditation University

More information

Articulation of Certification for Manufacturing

Articulation of Certification for Manufacturing Paper ID #15889 Articulation of Certification for Manufacturing Dr. Ali Ahmad, Northwestern State University Ali Ahmad is the Head of the Engineering Technology Department at Northwestern State University

More information

Academic Course Description

Academic Course Description Academic Course Description BME 101 ENGINEERING GRAPHICS BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Electrical and Electronics Engineering BME 102 ENGINEERING GRAPHICS First

More information

Programme Information & PLOs. Programme Leader. Purpose and learning outcomes of the programme

Programme Information & PLOs. Programme Leader. Purpose and learning outcomes of the programme Programme Information & s Title of the new programme including any year abroad/ in industry variants BSc Interactive Media Level of qualification Please select: Please indicate if the programme is offered

More information

Interior Architecture, BIAR Assessment Report, 2012

Interior Architecture, BIAR Assessment Report, 2012 Interior Architecture, BIAR Assessment Report, 2012 Expected Outcomes : Design Competency Students completing the Interior Architecture dual degree program will be able to design, develop and graphically

More information

PHOTOGRAPHY Course Descriptions and Outcomes

PHOTOGRAPHY Course Descriptions and Outcomes PHOTOGRAPHY Course Descriptions and Outcomes PH 2000 Photography 1 3 cr. This class introduces students to important ideas and work from the history of photography as a means of contextualizing and articulating

More information

Programme Information & PLOs. Programme Leader. Purpose and learning outcomes of the programme

Programme Information & PLOs. Programme Leader. Purpose and learning outcomes of the programme Programme Information & s Title of the new programme including any year abroad/ in industry variants BSc Interactive Media Level of qualification Please select: Please indicate if the programme is offered

More information

Draft Shape of the Australian Curriculum: Technologies

Draft Shape of the Australian Curriculum: Technologies November 2010 Draft Shape of the Australian Curriculum: Technologies March 2012 www.acara.edu.au Contents Purpose... 1 Background... 1 Introduction... 2 The contribution of technologies education to students

More information

Subject Content Knowledge Requirements (Abridged)

Subject Content Knowledge Requirements (Abridged) NSW Education Standards Authority Subject Content Knowledge Requirements (Abridged) Discipline Study Requirements for Admission to NSW Graduate Entry Programs Primary programs For admission to a NSW graduate

More information

Office location. Office phone

Office location. Office phone BME404-ENGINEERING METROLOGY & INSTRUMENTATION Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME404-ENGINEERING METROLOGY & INSTRUMENTATION

More information

Science, Technology, Engineering, and Math

Science, Technology, Engineering, and Math Science, Technology, Engineering, and Math Program of Study & Course Descriptions 2017/2018 1 Table of Contents Science, Technology, Engineering and Mathematics Cluster... 3 Engineering and Technology

More information

To understand the concept of basic engineering mechanism Compulsory : MANUFACTURING TECHNOLOGY II. Office phone

To understand the concept of basic engineering mechanism Compulsory : MANUFACTURING TECHNOLOGY II. Office phone BME505 - MANUFACTURING TECHNOLOGY II Academic Course Description BHARATH UNIVERSITY Faculty of Engineering and Technology Department of Mechanical Engineering BME505 - MANUFACTURING TECHNOLOGY II Fifth

More information

FACULTY SENATE ACTION TRANSMITTAL FORM TO THE CHANCELLOR

FACULTY SENATE ACTION TRANSMITTAL FORM TO THE CHANCELLOR - DATE: TO: CHANCELLOR'S OFFICE FACULTY SENATE ACTION TRANSMITTAL FORM TO THE CHANCELLOR JUN 03 2011 June 3, 2011 Chancellor Sorensen FROM: Ned Weckmueller, Faculty Senate Chair UNIVERSITY OF WISCONSIN

More information