In the sketch below, which line is NON- ISOMETRIC? The BEST way to form the 3D object shown below is to:

Size: px
Start display at page:

Download "In the sketch below, which line is NON- ISOMETRIC? The BEST way to form the 3D object shown below is to:"

Transcription

1 1-=-1st6wksExam-Sketch,asic rafting,and Page 1 of 6 irections for Numbers s 1-34 :Read each of the following multiple-choice items and the possible answers carefully. Mark the letter of the correct answer on your answer sheet or as instructed by your teacher. REMEMER: MKE NO MRKS ON THIS TEST. 1 In the sketch below, which line is NON- ISOMETRI? 3 The EST way to form the 3 object shown below is to: Union two boxes and a wedge. reate the profile and extrude. Union wedge shapes. reate a box and subtract (difference) a box then union a wedge. 2 E In the ISOMETRI sketch below, what is angle? 4 When you enter the IRLE command, displays 3P/2P/TTR/<enter Point>. The brackets around the enter Point indicate: That it is the default option. That you must specify the location of the center point before you can enter one of the other options. That you must specify the center point location by using keyboard entry. That you must specify the center point location by using mouse entry. 5 The following figure is an example of which command? Line rc Polygon Polyline

2 1-=-1st6wksExam-Sketch,asic rafting,and Page 2 of 6 6 The shape shown is a: 10 Which type of PITORIL sketch allows circles to appear on the front face as a true circle? imetric Ellipsoid. Sphere. Torus. Isometric Oblique Perspective 7 Truncated cone. The reason for using in place of pencil drawing is: To reduce time, overall appearance and readability, and make editing drawings easier. is easier than pencil drawing. 11 If you are using a computer to control the production process, the most appropriate term for the acronym M is: omputer ided Manufacturing. omputer ided Manual. omputer ided Marketing. omputer ided Model. does the drawing for you. There is no difference in drawings and pencil drawings. 12 commands such as LINE, IRLE, and R and other basic figures are examples of: 8 The most commonly used freehand lettering style on engineering drawings is: Inclined, uppercase (capital), Gothic. Inclined, uppercase (capital) mixed with lowercase. Vertical, uppercase (capital), Gothic. Vertical, uppercase (capital) mixed with lowercase. 13 Edit commands. File commands. Inquiry commands. raw commands. Which command enlarges or reduces selected objects proportionally in the X, Y, and Z directions? Scale 9 Most drawings done with instruments start from: lueprint drawings for manufacturing. Stretch rray ivide Models of a proposed object. Parts drawings found in catalogues. Sketches provided by engineers or designers. 14 What is the purpose of a PITORIL sketch? Learn to draw better Quickly explain an idea Properly use drafting tools Save money on paper

3 1-=-1st6wksExam-Sketch,asic rafting,and Page 3 of 6 15 The space between words should be equal to: ( 16 ") ( 4 " ). 20 What is the path between two points (straight or curved) called? Line Plane The width of the letter O. One-half the width of the word. Point Surface 16 What type of sketch is EST for describing a new product? detail esign Multiview Orthographic 21 The first step in sketching an isometric circle or ellipse is to sketch a(n): Large arc tangent at points. Isometric square/rhombus. Small arc tangent at points. Square. 17 What are the materials required for making a sketch? Pencil and compass Pencil and paper Pencil, paper and scale Pencil, paper and triangle 22 In an ISOMETRI sketch, what lines are NOT parallel to the three isometric axes? Elliptical Non-isometric Trimetric Vertical 18 It is commonly accepted practice that sketches are made with:.3mm leads. Red pencils. Softer leads. Harder leads. 23 Which PITORIL sketch has a 90 angle between two of its three axes? imetric Isometric Oblique Perspective 19 What is the symbol that describes a location in space? Line Plane Point Surface 24 Which PITORIL sketch is the most realistic in appearance, but the most complex to draw? Isometric Oblique Orthoscopic Perspective

4 1-=-1st6wksExam-Sketch,asic rafting,and Page 4 of 6 25 n electronic method of producing technical drawings is called: 30 The two standard triangles used in drafting are the: TM and the 45. M and the 45. T and the and the omputer-aided drafting typically refers to the process of using a computer to produce: 31 When doing single-stroke lettering, draw VERTIL strokes: 2 electronic drawings. From left to right. 3 solid models. From right to left. Finite element models. Starting at the bottom and moving upward. Rapid prototypes. Starting at the top and moving downward. 27 If using the pull-down menu, the ELLIPSE command is located under: Edit. Inquiry. Zoom. raw. 32 How are angles of 30 and 60 sketched? Measure with a protractor Measure with a triangle Subdivide a 90 angle into 2 parts Subdivide a 90 angle into 3 parts 28 In software, the TEXT command allows you to: Open the help features. o your lettering. ctivate the on-board manual. 33 The angle between ISOMETRI axes is: Match software with the reference textbook. The command used to dimension one side of a rectangle is: aseline dimension. ontinue dimension. 34 keyboard entry < 45, refers to: bsolute artesian. irect Point Entry. Relative artesian. Relative Polar. Leader. Linear dimension.

5 1-=-1st6wksExam-Sketch,asic rafting,and Page 5 of 6 35 What organization produces drafting standards for the United States? merican National Standards Institute (NSI) United States epartment of Labor United States ureau of Standards ommission on rafting Excellence irections for Numbers s :Read each of the following multiple-choice items and the possible answers carefully. Mark the letter of the correct answer on your answer sheet or as instructed by your teacher. REMEMER: MKE NO MRKS ON THIS TEST. Figure Which pictorial in Figure EST illustrates a PERSPETIVE? Figure #] #] #] #] Figure When using oolean operations for the 3 solids in Figure , means that you will: Subtract the top box from the bottom box, leaving the bottom in a U-shape. Join the two boxes into a single unit as shown. Leave the portion where the top and bottom boxes intersect. Subtract the big box from the smaller one, leaving the top box in a U-shape. 37 When using oolean operations for the 3 models in Figure , the result of 1 ( 2 3) would look like:

6 1-=-1st6wksExam-Sketch,asic rafting,and Page 6 of 6 #] #] #] #] Figure In Figure , the SPHERE is shown at: Figure When using oolean operations for the 3 solids in Figure , means that you will: Join the cylinder and the box into one unit. Subtract the cylinder from the box, leaving a hole in the box. Subtract the box from the cylinder, leaving two small cylinders. Leave a small cylinder that exists as the intersection of the two objects. Stop here

Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Description: Unit C - Sketching - Test 2.

Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Description: Unit C - Sketching - Test 2. Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 1 Description: Unit C - Sketching - Test 2 Form: 501 1. The most often used combination of views includes the:

More information

1. When sketching long, narrow objects in OBLIQUE, distortion can be lessened by placing the long dimension along:

1. When sketching long, narrow objects in OBLIQUE, distortion can be lessened by placing the long dimension along: Draft Student Name: Teacher: District: Date: Wake County Test: 9_12 T and I IC61 - Drafting I Test 2 Description: 3.03 Apply 3D sketching Form: 501 1. When sketching long, narrow objects in OBLIQUE, distortion

More information

Copyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material

Copyrighted Material. Copyrighted Material. Copyrighted. Copyrighted. Material Engineering Graphics ORTHOGRAPHIC PROJECTION People who work with drawings develop the ability to look at lines on paper or on a computer screen and "see" the shapes of the objects the lines represent.

More information

Technical Drawing 101 with AutoCAD 2018

Technical Drawing 101 with AutoCAD 2018 Technical Drawing 101 with AutoCAD 2018 A Multidisciplinary Guide to Drafting Theory and Practice with Video Instruction Douglas Smith Antonio Ramirez Ashleigh Fuller SDC PUBLICATIONS Better Textbooks.

More information

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece

Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece Inventor (10) Module 1H: 1H- 1 Module 1H: Creating an Ellipse-Based Cylindrical Sheet-metal Lateral Piece In this Module, we will learn how to create an ellipse-based cylindrical sheetmetal lateral piece

More information

Multi-View Drawing Review

Multi-View Drawing Review Multi-View Drawing Review Sacramento City College EDT 300/ENGR 306 EDT 300 / ENGR 306 - Chapter 5 1 Objectives Identify and select the various views of an object. Determine the number of views needed to

More information

CE 100 Civil Engineering Drawing Sessional (Lab Manual)

CE 100 Civil Engineering Drawing Sessional (Lab Manual) CE 100 Civil Engineering Drawing Sessional (Lab Manual) Department of Civil Engineering Ahsanullah University of Science and Technology November, 2017 1 Preface This course is designed to provide civil

More information

11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings

11/12/2015 CHAPTER 7. Axonometric Drawings (cont.) Axonometric Drawings (cont.) Isometric Projections (cont.) 1) Axonometric Drawings CHAPTER 7 1) Axonometric Drawings 1) Introduction Isometric & Oblique Projection Axonometric projection is a parallel projection technique used to create a pictorial drawing of an object by rotating the

More information

Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Form: 501

Student Name: Teacher: Date: District: Rowan. Assessment: 9_12 T and I IC61 - Drafting I Test 1. Form: 501 Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IC61 - Drafting I Test 1 Description: Test 4 A (Diagrams) Form: 501 Please use the following figure for this question. 1. In the GEOMETRIC

More information

MODELING AND DESIGN C H A P T E R F O U R

MODELING AND DESIGN C H A P T E R F O U R MODELING AND DESIGN C H A P T E R F O U R OBJECTIVES 1. Identify and specify basic geometric elements and primitive shapes. 2. Select a 2D profile that best describes the shape of an object. 3. Identify

More information

Chapter 5 Pictorial sketching

Chapter 5 Pictorial sketching Chapter 5 Pictorial sketching Contents Freehand sketching techniques Pictorial projections - Axonometric - Oblique Isometric projection vs isometric sketch Isometric sketch from an orthographic views Isometric

More information

UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS

UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS UNIT 5a STANDARD ORTHOGRAPHIC VIEW DRAWINGS 5.1 Introduction Orthographic views are 2D images of a 3D object obtained by viewing it from different orthogonal directions. Six principal views are possible

More information

Chapter 5 Pictorial Projection

Chapter 5 Pictorial Projection Chapter 5 Pictorial Projection Objectives After completing this chapter, the students will be able to Create freehand sketches using the correct sketching techniques. Explainthe difference between axonometric

More information

Tutorial Guide to AutoCAD 2014

Tutorial Guide to AutoCAD 2014 Tutorial Guide to AutoCAD 2014 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Visit the following websites

More information

Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING

Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING Engineering Graphics UNIVERSITY OF TEXAS RIO GRANDE VALLEY JAZMIN LEY HISTORY OF ENGINEERING GRAPHICS GEOMETRIC CONSTRUCTION & SOLID MODELING Overview History of Engineering Graphics: Sketching, Tools,

More information

Tutorial Guide to AutoCAD 2013

Tutorial Guide to AutoCAD 2013 Tutorial Guide to AutoCAD 2013 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S Schroff Development Corporation For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com

More information

Isometric Drawing Chapter 26

Isometric Drawing Chapter 26 Isometric Drawing Chapter 26 Sacramento City College EDT 310 EDT 310 - Chapter 26 - Isometric Drawing 1 Drawing Types Pictorial Drawing types: Perspective Orthographic Isometric Oblique Pictorial - like

More information

ENGINEERING GRAPHICS 1E9

ENGINEERING GRAPHICS 1E9 Lecture 3 Monday, 15 December 2014 1 ENGINEERING GRAPHICS 1E9 Lecture 3: Isometric Projections Lecture 3 Monday, 15 December 2014 2 What is ISOMETRIC? It is a method of producing pictorial view of an object

More information

ME 113 Computer Aided Engineering Drawing

ME 113 Computer Aided Engineering Drawing ME 113 Computer Aided Engineering Drawing Orthographic Projection - Visualizing Solids and Multiview Drawings Asst.Prof.Dr.Turgut AKYÜREK Çankaya University, Ankara Visualizing Solids and Multiview Drawings

More information

ENGINEERING DRAWING. 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer.

ENGINEERING DRAWING. 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer. ENGINEERING DRAWING 1. Set squares are used to draw different angles. What is the angel a formed by the 45⁰ set square? Give a brief answer. 2. Which is the correct method of hatching a plane surface?

More information

(Ans:d) a. A0 b. A1 c. A2 d. A3. (Ans:b) (Ans:a) (Ans:d) (Ans:d)

(Ans:d) a. A0 b. A1 c. A2 d. A3. (Ans:b) (Ans:a) (Ans:d) (Ans:d) Multiple Choice Questions (MCQ) on Engineering Drawing (Instruments) The mini drafter serves the purpose of everything except a. Scales b. Set square c. Protractor d. Compass (Ans:d) During operation,

More information

Sketching Fundamentals

Sketching Fundamentals Sketching Fundamentals Learning Outcome When you complete this module you will be able to: Make basic engineering sketches of plant equipment. Learning Objectives Here is what you will be able to do when

More information

Tutorial Guide to AutoCAD 2015

Tutorial Guide to AutoCAD 2015 Tutorial Guide to AutoCAD 2015 2D Drawing, 3D Modeling Shawna Lockhart SDC P U B L I C AT I O N S For Microsoft Windows Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Chapter 1 Overview of an Engineering Drawing

Chapter 1 Overview of an Engineering Drawing Chapter 1 Overview of an Engineering Drawing TOPICS Graphics language Engineering drawing Projection methods Orthographic projection Drawing standards TOPICS Traditional Drawing Tools Lettering Freehand

More information

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean

CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING. Prepared by: Sio Sreymean CHAPTER 01 PRESENTATION OF TECHNICAL DRAWING Prepared by: Sio Sreymean 2015-2016 Why do we need to study this subject? Effectiveness of Graphics Language 1. Try to write a description of this object. 2.

More information

Chapter 7 Isometric Drawings

Chapter 7 Isometric Drawings Chapter 7 Isometric Drawings In this assignment, we are going to look at creating isometric drawings with AutoCAD. These drawing appear to be three dimensional but they are not. An AutoCAD isometric drawing

More information

1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION

1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION 1 ISOMETRIC PROJECTION SECTION I: INTRODUCTION TO ISOMETRIC PROJECTION Orthographic projection shows drawings of an object in a two-dimensional format, with views given in plan, elevation and end elevation

More information

(As per New Revised Syllabus of Anna University) Department of Mechanical Engineering. SATHYABAMA UNIVERSITY Jeppiaar Nagar, Chennai

(As per New Revised Syllabus of Anna University) Department of Mechanical Engineering. SATHYABAMA UNIVERSITY Jeppiaar Nagar, Chennai (1*,1((5,1* *5$3+,&6 (As per New Revised Syllabus of Anna University) Dr. S.RAMACHANDRAN, M.E., Ph.D. Professor & Head K. PANDIAN, M.E., E.V.V.RAMANAMURTHY, M.Tech., R. DEVARAJ, M.E., Associate Professors

More information

Describing an Angle Bracket

Describing an Angle Bracket Basics of Drafting Describing an Angle Bracket Orthographic Projection Orthographic drawings represent three dimensional objects in three separate views arranged in a standard manner. Orthographic Views

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Chapter 12 Exercise 1 3. Click on Top in the ViewCube. 4. Call the Polyline tool from the Home/Draw panel and construct the pline outline. 5. Call the Polysolid

More information

Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke

Autodesk Inventor. In Engineering Design & Drafting. By Edward Locke Autodesk Inventor In Engineering Design & Drafting By Edward Locke Engineering Design Drafting Essentials Working Drawings: Orthographic Projection Views (multi-view, auxiliary view, details and sections)

More information

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices.

AutoCAD Tutorial First Level. 2D Fundamentals. Randy H. Shih SDC. Better Textbooks. Lower Prices. AutoCAD 2018 Tutorial First Level 2D Fundamentals Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org) Visit the following websites to

More information

Introduction to AutoCAD 2012

Introduction to AutoCAD 2012 Page 1 Introduction to AutoCAD 2012 Alf Yarwood Answers to Multiple choice questions Chapter 1 1. The toolbar at the top of the AutoCAD 2012 window is: (a) The Draw toolbar (b) The Modify toolbar (c) The

More information

2. Line composed of closely and evenly spaced short dashes in a drawing represents

2. Line composed of closely and evenly spaced short dashes in a drawing represents 1. Hidden lines are drawn as (a) dashed narrow lines (b) dashed wide lines (c) long-dashed dotted wide line (d) long-dashed double dotted wide line Ans: (a) 2. Line composed of closely and evenly spaced

More information

Technology Education Grades Drafting I

Technology Education Grades Drafting I Technology Education Grades 9-12 Drafting I 46 Grade Level: 9, 10, 11, 12 Technology Education, Grades 9-12 Drafting I Prerequisite: None Drafting I is an elective course which provides students the opportunity

More information

Isometric Drawings. Figure A 1

Isometric Drawings. Figure A 1 A Isometric Drawings ISOMETRIC BASICS Isometric drawings are a means of drawing an object in picture form for better clarifying the object s appearance. These types of drawings resemble a picture of an

More information

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW

Introduction to Autodesk Inventor User Interface Student Manual MODEL WINDOW Emmett Wemp EDTECH 503 Introduction to Autodesk Inventor User Interface Fill in the blanks of the different tools available in the user interface of Autodesk Inventor as your instructor discusses them.

More information

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated)

Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) Inventor (5) Module 2: 2-1 Module 2: Radial-Line Sheet-Metal 3D Modeling and 2D Pattern Development: Right Cone (Regular, Frustum, and Truncated) In this tutorial, we will learn how to build a 3D model

More information

ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION

ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION IM SYLLABUS (2014) ENGINEERING DRAWING IM 09 AND GRAPHICAL COMMUNICATION SYLLABUS Engineering Drawing and Graphical Communication IM 09 (Available in September) Syllabus 1 Paper (3 hours) Aims The aims

More information

Related Drafting. (Construction related trades)

Related Drafting. (Construction related trades) (Construction related trades) I. Course Description Related Drafting This course is broken up into 36 weeks. The main goal of this course is to introduce construction related trades the necessary skills

More information

Constructing a Wedge Die

Constructing a Wedge Die 1-(800) 877-2745 www.ashlar-vellum.com Using Graphite TM Copyright 2008 Ashlar Incorporated. All rights reserved. C6CAWD0809. Ashlar-Vellum Graphite This exercise introduces the third dimension. Discover

More information

Pictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor

Pictorial Drawings. DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor DFTG-1305 Technical Drafting Prepared by Francis Ha, Instructor Pictorial Drawings Geisecke s textbook for reference: 14 th Ed. Ch. 15: p. 601 Ch. 16: p. 620 15 th Ed. Ch. 14: p. 518 Ch. 15: p. 552 Update:

More information

ENGINEERING DRAWING SKKK 1021 ISOMETRIC DRAWING. Agus Arsad, Azizul Azri Bin Mustaffa 10/2/2012 1

ENGINEERING DRAWING SKKK 1021 ISOMETRIC DRAWING. Agus Arsad, Azizul Azri Bin Mustaffa 10/2/2012 1 ENGINEERING DRAWING SKKK 1021 ISOMETRIC DRAWING Agus Arsad, Azizul Azri Bin Mustaffa 10/2/2012 1 LEARNING OUTCOMES ISOMETRIC DRAWING It is expected that students will be able to: Understand the significance

More information

2004 Academic Challenge

2004 Academic Challenge 2004 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University

More information

technical drawing

technical drawing technical drawing school of art, design and architecture nust spring 2011 http://www.youtube.com/watch?v=q6mk9hpxwvo http://www.youtube.com/watch?v=bnu2gb7w4qs Objective abstraction - axonometric view

More information

SYLLABUS. Apprenticeship Training Scheme

SYLLABUS. Apprenticeship Training Scheme SYLLABUS For the trade of CAD-CAM OPERATOR CUM PROGRAMMER UNDER Apprenticeship Training Scheme Government of India Ministry of Labour & Employment Directorate General of Employment & Training New Delhi-110001

More information

Test Code: 8294 / Version 1

Test Code: 8294 / Version 1 Pennsylvania Customized Assessment Blueprint Test Code: 8294 / Version 1 Copyright 2014. All Rights Reserved. General Assessment Information Blueprint Contents General Assessment Information Written Assessment

More information

TIME SCHEDULE. Module Topic Periods 1 Importance of Engineering Graphics Drawing Instruments Drawing Standards Lettering and Numbering

TIME SCHEDULE. Module Topic Periods 1 Importance of Engineering Graphics Drawing Instruments Drawing Standards Lettering and Numbering COURSE TITLE : ENGINEERING GRAPHICS (First Semester) COURSE CODE : COURSE CATEGORY : F PERIODS/WEEK : 3 PERIODS/SEMESTER : 54 CREDITS : Examination in the Second Semester RATIONALE: Engineering Graphics

More information

AutoCAD LT 2009 Tutorial

AutoCAD LT 2009 Tutorial AutoCAD LT 2009 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com Better Textbooks. Lower Prices. AutoCAD LT 2009 Tutorial 1-1 Lesson

More information

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS. Schroff Development Corporation

AutoCAD LT 2012 Tutorial. Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS.   Schroff Development Corporation AutoCAD LT 2012 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS www.sdcpublications.com Schroff Development Corporation AutoCAD LT 2012 Tutorial 1-1 Lesson 1 Geometric Construction

More information

Coimisiún na Scrúduithe Stáit State Examinations Commission. Junior Certificate Marking Scheme. Technical Graphics.

Coimisiún na Scrúduithe Stáit State Examinations Commission. Junior Certificate Marking Scheme. Technical Graphics. Coimisiún na Scrúduithe Stáit State Examinations Commission Junior Certificate 2013 Marking Scheme Technical Graphics Higher Level Note to teachers and students on the use of published marking schemes

More information

2010 Academic Challenge

2010 Academic Challenge 2010 Academic Challenge ENGINEERING GRAPHICS TEST STATE FINALS This Test Consists of 40 Questions Engineering Graphics Test Production Team Ryan K. Brown, Illinois State University Author/Team Leader Jacob

More information

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge

Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge Inventor (10) Module 1G: 1G- 1 Module 1G: Creating a Circle-Based Cylindrical Sheet-metal Lateral Piece with an Overlaying Lateral Edge Seam And Dove-Tail Seams on the Top Edge In Module 1A, we have explored

More information

The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly.

The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Introduction - Teacher Notes Fig 1. The project focuses on the design for a Pencil holder, but could be adapted to any simple assembly. Pro/DESKTOP enables pupils (and teachers) to communicate and model

More information

60 Most Important Engineering Drawing Questions

60 Most Important Engineering Drawing Questions 1. If a client of yours is having difficulty visualizing a design, what type of drawing would be the easiest to understand? A. axonometric B. three-view orthographic C. one-view orthographic D. bimetric

More information

Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic

Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic Beginning Engineering Graphics 3 rd Week Lecture Notes Instructor: Edward N. Locke Topic: The Coordinate System, Types of Drawings and Orthographic 1 st Subject: The Cartesian Coordinate System The Cartesian

More information

Technological Design Mr. Wadowski. Orthographic & Isometric Drawing Lesson

Technological Design Mr. Wadowski. Orthographic & Isometric Drawing Lesson Technological Design Mr. Wadowski Orthographic & Isometric Drawing Lesson TOPICS Working Drawings, Isometric Drawings & Orthographic Drawings Glass box concept Multiview projection Orthographic projection

More information

2. To develop basic skills in the use of drawing instruments and drafting techniques.

2. To develop basic skills in the use of drawing instruments and drafting techniques. IT-111 ENGINEERING DRAFTING SYLLABUS Instructor: R. Edward Rode= Office: Room 110-4, Anzalone Hall Hours: Refer to Schedule Phone: (985-549-2092) Fax : (985-549-5532) Email : erode@selu.edu Course Title:

More information

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation Oregon Institute of Technology

SDC. AutoCAD LT 2007 Tutorial. Randy H. Shih. Schroff Development Corporation   Oregon Institute of Technology AutoCAD LT 2007 Tutorial Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Schroff Development Corporation www.schroff.com www.schroff-europe.com AutoCAD LT 2007 Tutorial 1-1 Lesson 1 Geometric

More information

Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge

Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge Brief Introduction to Engineering Graphics The use of drawings to convey information. Sketching freehand straight edge CAD drawings 2D drafting 3D model to 2D drawings 1 Different Graphical Representation

More information

2004 Academic Challenge

2004 Academic Challenge 2004 Academic Challenge ENGINEERING GRAPHICS TEST - SECTIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator Kevin Devine, Illinois State University

More information

Drawing sheet: - The various size of the drawing sheet used for engineering drawing as per IS Are listed in the table

Drawing sheet: - The various size of the drawing sheet used for engineering drawing as per IS Are listed in the table Dronacharya Group of Institutions, Greater Noida Computer Aided Engineering Graphics (CAEG) (NCE 151/251) List of Drawing Sheets: 1. Letter writing & Dimensioning. 2. Projection of Points & Lines. 3. Projection

More information

2009 Academic Challenge

2009 Academic Challenge 2009 Academic Challenge ENGINEERING GRAPHICS TEST SECTIONAL This Test Consists of 50 Questions Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Leader Kevin Devine,

More information

AABTKJX by Prentice Hall, Inc. A Pearson Company

AABTKJX by Prentice Hall, Inc. A Pearson Company Figure Number: 03-01 Page Number: Principal Items of Equipment. AABTKJX0 Figure Number: 03-02 Page Number: The T-square. AABTKJY0 Figure Number: 03-03 Page Number: Testing the Working Edge of the Drawing

More information

Downloaded from ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70

Downloaded from   ENGINEERING DRAWING. Time allowed : 3 hours Maximum Marks : 70 ENGINEERING DRAWING Time allowed : 3 hours Maximum Marks : 70 Note : (i) (ii) Attempt all the questions. Use both sides of the drawing sheet, if necessary. (iii) All dimensions are in millimeters. (iv)

More information

Orthographic Projection

Orthographic Projection Orthographic Projection Why Orthographic Projection is used in technical drawing Orthographic projection is a method of producing a number of separate two-dimensional inter-related views, which are mutually

More information

Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10

Mechanical Drawing. Unit 2 Study Guide for Chapters 6-10 Mechanical Drawing Unit 2 Study Guide for Chapters 6-10 Chapter 6 Multiview Drawing Section 6.1 Understanding Orthographic Projection A. Technical Drawing: How can a technical drawing give more accurate

More information

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation

with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation with MultiMedia CD Randy H. Shih Jack Zecher SDC PUBLICATIONS Schroff Development Corporation WWW.SCHROFF.COM Lesson 1 Geometric Construction Basics AutoCAD LT 2002 Tutorial 1-1 1-2 AutoCAD LT 2002 Tutorial

More information

Two-Dimensional Drawing

Two-Dimensional Drawing 22 Chapter Cxxxx 40757 3/19/08 10:24 AM Page 1 7% 3% 3% 18% 20% 22 Chapter CXXXX 40757 Page 1 03/18/08 MD 22 Two-Dimensional Drawing objectives After completing this chapter, you should be able to Identify

More information

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester

Dharmapuri LAB MANUAL. : B.E. - Civil Engineering Year & Semester : I Year / II Semester Dharmapuri 636 703 LAB MANUAL Regulation : 2013 Branch : B.E. - Civil Engineering Year & Semester : I Year / II Semester CE6261-COMPUTER AIDED DRAFTING AND MODELLING LABORATORY ICAL ENG VVIT DEPARTMENT

More information

COURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE:

COURSE TITLE: ENGINEERING DRAWING 2 GRADES LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: COURSE TITLE: ENGINEERING DRAWING 2 GRADES 10-12 LENGTH: FULL YEAR SCHOOLS: RUTHERFORD HIGH SCHOOL RUTHERFORD, NEW JERSEY DATE: SPRING 2015 Engineering Drawing 2-2 Rutherford High School Rutherford, NJ

More information

Pull Down Menu View Toolbar Design Toolbar

Pull Down Menu View Toolbar Design Toolbar Pro/DESKTOP Interface The instructions in this tutorial refer to the Pro/DESKTOP interface and toolbars. The illustration below describes the main elements of the graphical interface and toolbars. Pull

More information

DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL

DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL DELHI TECHNOLOGICAL UNIVERSITY ENGINEERING GRAPHICS LAB MANUAL NAME: - ROLL NO: - GROUP: - BRANCH: - GROUP TEACHER: Page 1 www.rooplalrana.com 1 GENERAL INSTRUCTIONS FOR ENGG. GRAPHICS LAB 1) Students

More information

ADA Curriculum for Pre-Engineering Students Correlation Guide

ADA Curriculum for Pre-Engineering Students Correlation Guide ADA Curriculum for Pre-Engineering Students Correlation Guide Madsen/Autodesk Inventor 7: Basics Through Advanced Note: The concepts presented in the ADA Curriculum are covered in the text as they pertain

More information

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry

1. Create a 2D sketch 2. Create geometry in a sketch 3. Use constraints to position geometry 4. Use dimensions to set the size of geometry 2.1: Sketching Many features that you create in Fusion 360 start with a 2D sketch. In order to create intelligent and predictable designs, a good understanding of how to create sketches and how to apply

More information

2003 Academic Challenge

2003 Academic Challenge Worldwide Youth in Science and Engineering 2003 Academic Challenge ENGINEERING GRAPHICS TEST - REGIONAL Engineering Graphics Test Production Team Ryan Brown, Illinois State University Author/Team Coordinator

More information

I B.TECH- I SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING DRAWING

I B.TECH- I SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING DRAWING I B.TECH- I SEMESTER DEPARTMENT OF MECHANICAL ENGINEERING ENGINEERING DRAWING ENGINEERING DRAWING UNIT-V DEFINITIONS: Axonometric Trimetric Dimetric Isometric It is a parallel technique used to create

More information

TECHNICAL GRAPHICS AND DESIGN SYLLABUS

TECHNICAL GRAPHICS AND DESIGN SYLLABUS ZIMBABWE MINISTRY OF PRIMARY AND SECONDARY EDUCATION TECHNICAL GRAPHICS AND DESIGN SYLLABUS FORMS 1-4 2015-2022 Curriculum Development and Technical Services P.O. Box MP 133 Mount Pleasant Harare All Rights

More information

Principles and Practice:

Principles and Practice: Principles and Practice: An Integrated Approach to Engineering Graphics and AutoCAD 2014 Randy H. Shih Multimedia Disc SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Video presentations

More information

Interpretation of Drawings. An Introduction to the Basic Concepts of Creating Technical Drawings

Interpretation of Drawings. An Introduction to the Basic Concepts of Creating Technical Drawings Interpretation of Drawings An Introduction to the Basic Concepts of Creating Technical Drawings Introduction In the design process drawings are the main way in which information about an object or product

More information

The Revolve Feature and Assembly Modeling

The Revolve Feature and Assembly Modeling The Revolve Feature and Assembly Modeling PTC Clock Page 52 PTC Contents Introduction... 54 The Revolve Feature... 55 Creating a revolved feature...57 Creating face details... 58 Using Text... 61 Assembling

More information

JUNIOR CERTIFICATE 2008 MARKING SCHEME TECHNICAL GRAPHICS HIGHER LEVEL

JUNIOR CERTIFICATE 2008 MARKING SCHEME TECHNICAL GRAPHICS HIGHER LEVEL JUNIOR CERTIFICATE 2008 MARKING SCHEME TECHNICAL GRAPHICS HIGHER LEVEL Sections A and B Section A - any ten questions from this Section Q1 12 Four diagrams, 3 marks for each correct label. Q2 12 3 height

More information

Chapter 1 Introduction

Chapter 1 Introduction Chapter 1 Introduction Contents Engineering drawing Drawing standards Drawing sheet Scale Lettering Line types Engineering Drawing Contents Engineering Drawing Effectiveness of Graphic Language 1. Try

More information

Computer Aided Design I

Computer Aided Design I Black Horse Pike Regional School District 580 Erial Road, Blackwood, NJ 08012 Computer Aided Design I COURSE OF STUDY Technology Department Written by: Ken Whalen, Steve Arena and Vince Mannino Date: May

More information

Product Modelling in Solid Works

Product Modelling in Solid Works Product Modelling in Solid Works In the following exercise you will use solid works to construct the computer mouse shown opposite. In this exercise you will use a number of advanced features to achieve

More information

DMT113 Engineering Drawing. Chapter 3 Stretch System

DMT113 Engineering Drawing. Chapter 3 Stretch System DMT113 Engineering Drawing Chapter 3 Stretch System Contents Theory & Multiview Planes 6 Principle Views Multiview Sketching Technique & Perspective First & Third Angle Multiview Representations Theory

More information

Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design)

Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design) Unit 4: Geometric Construction (Chapter4: Geometry For Modeling and Design) DFTG-1305 Technical Drafting Instructor: Jimmy Nhan OBJECTIVES 1. Identify and specify basic geometric elements and primitive

More information

MISS. HANNA S CLASSROOM RULES

MISS. HANNA S CLASSROOM RULES MISS. HANNA S CLASSROOM RULES 1. My students never fail. I believe in you and so shall you! Miss. Hanna s Quote! 2. Come to class on time. 3. Bring a positive attitude. 4. Come prepared and bring your

More information

ENGINEERING GRAPHICS ESSENTIALS

ENGINEERING GRAPHICS ESSENTIALS ENGINEERING GRAPHICS ESSENTIALS with AutoCAD 2012 Instruction Introduction to AutoCAD Engineering Graphics Principles Hand Sketching Text and Independent Learning CD Independent Learning CD: A Comprehensive

More information

Principles and Practice

Principles and Practice Principles and Practice An Integrated Approach to Engineering Graphics and AutoCAD 2016 Randy H. Shih SDC PUBLICATIONS Better Textbooks. Lower Prices. www.sdcpublications.com Powered by TCPDF (www.tcpdf.org)

More information

Evaluation Chapter by CADArtifex

Evaluation Chapter by CADArtifex The premium provider of learning products and solutions www.cadartifex.com EVALUATION CHAPTER 2 Drawing Sketches with SOLIDWORKS In this chapter: Invoking the Part Modeling Environment Invoking the Sketching

More information

ENGINEERING DRAWING AM 09

ENGINEERING DRAWING AM 09 AM SYLLABUS (2014) ENGINEERING DRAWING AM 09 SYLLABUS 1 Engineering Drawing AM09 (Available in September) Syllabus Paper I (3 hrs) + Paper II (3 hrs) + coursework Aims The aims of the syllabus are to further

More information

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS

Tools for Design. with VEX Robot Kit: Randy H. Shih Oregon Institute of Technology SDC PUBLICATIONS Tools for Design with VEX Robot Kit: AutoCAD 2011 and Autodesk Inventor 2011 2D Drawing 3D Modeling Hand Sketching Randy H. Shih Oregon Institute of Technology INSIDE: SUPPLEMENTAL FILES ON CD SDC PUBLICATIONS

More information

Civil Engineering Drawing

Civil Engineering Drawing Civil Engineering Drawing Third Angle Projection In third angle projection, front view is always drawn at the bottom, top view just above the front view, and end view, is drawn on that side of the front

More information

Philadelphia University Faculty of Engineering Mechanical Engineering Department

Philadelphia University Faculty of Engineering Mechanical Engineering Department Philadelphia University Faculty of Engineering Mechanical Engineering Department Basics of Engineering Drawing Manual Done by:- Eng. Laith R.I. Batarseh Eng. Hanan Khamis 2017 1 Table of contents SUBJECT

More information

Kankakee Community College

Kankakee Community College Kankakee Community College Course prefix and number: DRFT 2114 Course title: AutoCAD I Credit hours: 4 Lecture hours: 2.5 Lab hours: 3 Semester: Spring 2015 Catalog description: This course introduces

More information

2.000 Sketching Example: Tractor transmission

2.000 Sketching Example: Tractor transmission 1. HAVE A PLAN:Look at the transmission from the angle you want to draw it from choose an angle that will show the most information. Here we choose to draw an oblique sketch for clarity and simplicity.

More information

GL5: Visualisation and reading drawings

GL5: Visualisation and reading drawings 436-105 Engineering Communications GL5:1 GL5: Visualisation and reading drawings Being able to both: represent a 3D object in multiview drawings interpret a multiview drawing to visualise a 3D object is

More information

Activity Bracket

Activity Bracket Activity 1.5.6 Bracket Introduction Studying how an object is fastened is not something you do every day. But, just for fun, consider looking at how your desk or your locker is held together. Most likely,

More information