BS EN :2006. Test of: Deceuninck Side hung and top hung window. Windows and doors Product standard, performance characteristics
|
|
- Sibyl Davidson
- 5 years ago
- Views:
Transcription
1 Exova Warringtonfire Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) F : +44 (0) E : willenhall@exova.com W: BS EN :2006 Test of: Deceuninck Side hung and top hung window Windows and doors Product standard, performance characteristics A Report To: Securistyle Ltd Date: 11/09/2013 Copy: 01 Issue No.: 01 Page 1 Document Reference: WIL Registered Office: Exova (UK) Ltd, Lochend Industrial Estate, Newbridge, Midlothian EH28 8PL United Kingdom. Reg No.SC This report in issued in accordance with our terms and conditions, a copy of which is available on request.
2 TEST CONCLUSIONS Samples of: Manufacturer Product Model Deceuninck Top hung and side hung window Top hung and side hung window have been tested in accordance with: BS EN :2006 By Exova Warringtonfire Willenhall, a UKAS accredited Testing Laboratory (No. 0621) and EC Notified Body number (No. 1104) At Key Industrial Park, Fernside Rd, Willenhall, West Midlands, WV13 3YA. Results and comments as detailed below: Clause No. Description Compliance 4.8 Load bearing capacity of safety devices 350N Yes 4.8 Load bearing capacity of safety devices 350N Yes No inferences can be made regarding performance against other requirements of this standard Tests marked N/A are not applicable to the sample under test. Tests marked N/T were not applied to the sample under test Document No.: WIL Page No.: 2 of 20 Document No.RS91 Issue No.1 Sheet No.2 of 20
3 AUTHORISATION Tests performed by: Chris Bryan, Laboratory Technician Report issued by: Chris Bryan, Laboratory Technician Signed Date 11 th September 2013 For and on behalf of Exova Warringtonfire Report authorised by: Mark West, Assistant Operations Manager Signed Date 11 th September 2013 For and on behalf of Exova Warringtonfire Report issued: 11 September 2013 NOTE. Tests marked Not UKAS Accredited are not covered by the Laboratory UKAS accreditation schedule. Tests marked NT were not tested Tests marked NA are not applicable to the product on test. The laboratory has tested the product supplied by the client as sampled in accordance with their own requirements Exova Warringtonfire is an EC Notified Body Number 1104 This report shall not be reproduced except in full, (and then only as permitted by copyright laws), without written approval from Exova Warringtonfire Document No.: WIL Page No.: 3 of 20 Document No.RS91 Issue No.1 Sheet No.3 of 20
4 CONTENTS PAGE NO. TEST CONCLUSIONS... 2 AUTHORISATION... 3 TEST DETAILS... 5 TEST PROCEDURE... 6 INITIAL OBSERVATIONS... 7 TEST SPECIMEN... 8 SCHEDULE OF COMPONENTS PERFORMANCE CRITERIA & TEST RESULTS CONCLUSIONS LIMITATIONS REVISION HISTORY Document No.: WIL Page No.: 4 of 20 Document No.RS91 Issue No.1 Sheet No.4 of 20
5 TEST DETAILS CLIENT DETAILS Company name Address Postcode Securistyle Ltd Kingmead Industrial Estate Princess Elizerbeth Way Cheltenham GL51 7RE Contact Gary Denley ORDER DETAILS Order number Dated 05/07/2013 SAMPLE DETAILS Product Model Manufacturer Frame Dimensions Sash Dimensions Material Details of Hardware Hinges Markings Date of Manufacture Other information Top hung and side hung window Top hung and side hung window Deceuninck 700 x 1400 mm (Side hung) 1200 x 1200 mm (Top hung) 655 x 1350 mm (Side hung) 1150 x 1150 mm (Top hung) PVC-u Securistyle None Unknown None TEST DETAILS Test specification BS EN :2006 Full test Yes Test to clauses Test Method BS EN 14609:2004 strength of safety devices Sample received 01/07/2013 Test started 05/07/2013 Test completed 05/07/2013 Special Test requirements Other reports to be used in conjunction with this report None None Document No.: WIL Page No.: 5 of 20 Document No.RS91 Issue No.1 Sheet No.5 of 20
6 TEST PROCEDURE Introduction This test report should be read in conjunction with the Standard BS EN :2006: Windows and doors Product standard, performance characteristics Part 1: Windows and external pedestrian door set s with out resistance to fire and/or smoke leakage characteristics. The specimens were judged on their ability to comply with the performance criteria as required in BS EN :2006, with test methods BS EN Instruction To Test Test Specimen Construction Sampling Installation The test was conducted on the 5 th July 2013 on behalf of Securistyle Ltd. Initial requirement was as defined in BS6375-2, requiring a performance of a threshold value of 350N for load-bearing capacity of safety devices. A description of the test construction is given in the Schedule of Components. The description is based on a detailed survey of the specimens and information supplied by the sponsor of the test. The samples were not independently witnessed or selected and were provided direct from the test sponsor. The sample was supplied mounted within a timber sub-frame of nominal section 75mm x 100mm fitted flush with the exterior face, in accordance with the clients fitting instructions. Test Climate The sample was conditioned in the laboratory in the range C and 25-75% humidity. The temperature and humidity in the lab was maintained in the range C and % humidity for the duration of the test. Document No.: WIL Page No.: 6 of 20 Document No.RS91 Issue No.1 Sheet No.6 of 20
7 INITIAL OBSERVATIONS The internal face of the samples Restrictors fitted to window Document No.: WIL Page No.: 7 of 20 Document No.RS91 Issue No.1 Sheet No.7 of 20
8 TEST SPECIMEN SIDE HUNG WINDOW Figure 1- General Elevation of Test Specimen (External Face) No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 8 of 20 Document No.RS91 Issue No.1 Sheet No.8 of 20
9 Figure 2 Horizontal section No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 9 of 20 Document No.RS91 Issue No.1 Sheet No.9 of 20
10 Figure 3 Vertical section No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 10 of 20 Document No.RS91 Issue No.1 Sheet No.10 of 20
11 SCHEDULE OF COMPONENTS SIDE HUNG WINDOW (Refer to Figures 1 to 3) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Variants None Item Description 1. Window casement (s) Overall Size 700mm x 1400mm (side hung) Supplier : Deceuninck Ltd Profile codes 2532 frame (no inserts or reinforcement) 2534 sash (no inserts or reinforcement) 2540 bead Material : PVC Density : kg/m 3 (stated) Sash framing section sizes Corner fixing method Type size quantity : Welded 2. Window casement glass Supplier : County Glass (Holt) Thickness : Overall size 28mm 3. Window frame head Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Overall section size : 98mm Rebate : 20mm Fixing jamb to head joints : i. type : Welded 4. Window frame jamb Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Overall section size : 98mm Rebate : 20mm Fixing jamb to sill joints i. type : Welded Document No.: WIL Page No.: 11 of 20 Document No.RS91 Issue No.1 Sheet No.11 of 20
12 Item Description 5. Window frame sill Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Density : kg/m 3 (stated) Overall section size : 98mm Rebate 20mm 6. Hinges Supplier : Securistyle Description : Defender Reference : EDS16H6 (top) Quantity : 1 Fixing hinge to sash i. type : Rapier Star SFG ii. size : 4.3 x 25Z iii. quantity : 3 Fixing hinge to frame i. type : Rapier Star SFG ii. size : 4.3 x 20Z iii. quantity : 3 7. Restrictor Supplier : Securistyle Description : Defender (bottom) Reference : EDSR16H6 Fixing restrictor to sash i. type : Rapier Star SFG ii. size : 4.3 x 25Z iii. quantity : 3 Fixing restrictor to frame i. type : Rapier Star SFG ii. size : 4.3 x 20Z iii. quantity : 3 Document No.: WIL Page No.: 12 of 20 Document No.RS91 Issue No.1 Sheet No.12 of 20
13 TEST SPECIMEN TOP HUNG WINDOW Figure 1- General Elevation of Test Specimen (External Face) No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 13 of 20 Document No.RS91 Issue No.1 Sheet No.13 of 20
14 Figure 2 Horizontal section No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 14 of 20 Document No.RS91 Issue No.1 Sheet No.14 of 20
15 Figure 3 Vertical section No drawings Supplied by Client Do not scale. All dimensions are in mm Document No.: WIL Page No.: 15 of 20 Document No.RS91 Issue No.1 Sheet No.15 of 20
16 SCHEDULE OF COMPONENTS TOP HUNG WINDOW (Refer to Figures 1 to 3) (All values are nominal unless stated otherwise) (All other details are as stated by the sponsor) Variants None Item Description 1. Window casement (s) Overall Size 1200mm x 1200mm (top hung) Supplier : Deceuninck Ltd Profile codes Material : PVC Sash framing section sizes Corner fixing method Type size quantity : Welded 2532 frame (no inserts or reinforcement) 2534 sash (no inserts or reinforcement) 2540 bead 2. Window casement glass Supplier : County Glass (Holt) Thickness : Overall size 28mm 3. Window frame head Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Overall section size : 98mm Rebate : 20mm Fixing jamb to head joints : Welded 4. Window frame jamb Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Overall section size : 98mm Rebate : 20mm Fixing jamb to sill joints 5. Window frame sill Supplier : Deceuninck Ltd Profile code : 2532/2534/2540 Material : PVC Overall section size : 98mm Rebate 20mm Document No.: WIL Page No.: 16 of 20 Document No.RS91 Issue No.1 Sheet No.16 of 20
17 Item Description 6. Restrictor Supplier : Securistyle Description : Defender Reference : EDTR24H6 x 2 Fixing restrictor to sash i. type : Rapier Star SFG ii. size : 4.3 x 25Z iii. quantity : 3 Fixing restrictor to frame i. type : Rapier Star SFG ii. size : 4.3 x 20Z iii. quantity : 3 Document No.: WIL Page No.: 17 of 20 Document No.RS91 Issue No.1 Sheet No.17 of 20
18 PERFORMANCE CRITERIA & TEST RESULTS Clause Result Pass/Fail 4.8 Loadbearing capacity of safety devices The restrictor was engaged and a load of 350N was applied to the leading ledge of the restricted stile for 60seconds. The Load was removed and the restrictor continued to operate after the test. PASS Side hung 4.8 Loadbearing capacity of safety devices Top hung The restrictor was engaged and a load of 350N was applied to the leading edge of the restricted stile for 60 seconds, The same load was then applied to the unrestricted leading edge for 60 seconds. The restrictor continued to operate after the test. PASS Document No.: WIL Page No.: 18 of 20 Document No.RS91 Issue No.1 Sheet No.18 of 20
19 CONCLUSIONS Evaluation against objective The sample as provided by the client was subjected to operational & strength testing in accordance with BS EN :2006 and achieved the requirements of clause 4.8 Load-bearing capacity of safety devices. Observations & comments LIMITATIONS Limitations Range of window assemblies covered by this report Uncertainty of Measurement The results relate only to the behaviour of the specimens of the element of construction under the particular conditions of test. They are not intended to be the sole criteria for assessing the potential performance of the element in use, nor do they reflect the actual behaviour in use. It is our opinion that the range of window assemblies covered by this report are limited to the following Assemblies with identical hardware fitted no further apart than in the tested assembly Assemblies of the same or smaller overall dimensions to the tested assembly The uncertainties of measurements calculated for a confidence level of 95% throughout these tests are within the limits of these tolerances. The standard specifies the following tolerances Forces: ±2% Distances: ±1mm for tape measures ± 0.01mm for dial gauges Times: ±5s Document No.: WIL Page No.: 19 of 20 Document No.RS91 Issue No.1 Sheet No.19 of 20
20 REVISION HISTORY Issue No : Re - Issue Date : Revised By: Approved By: Reason for Revision: Issue No : Re - Issue Date : Revised By: Approved By: Reason for Revision: END OF REPORT Document No.: WIL Page No.: 20 of 20 Document No.RS91 Issue No.1 Sheet No.20 of 20
Report No: Test of: Securestyle Ltd Aluminium top and side hung windows And PVC-U top and side hung window. Tested to:
Exova Warringtonapt Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com Report No: 191795 Test
More informationBS EN :2006. Test of: Auto Latch and Laminated restrictor
Exova Warringtonapt Key Industrial Park Fernside Road Willenhall West Midlands WV13 3YA T : +44 (0) 1902 722 122 F : +44 (0) 1902 727 242 E : willenhall@exova.com W: www.exova.com BS EN 14351-1:2006 Test
More informationThe Fire Resistance Performance Of Timber Or Mineral Composite Based Insulated Doorsets When Fitted With HOPPE and ARRONE Pull Handles
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The Fire Resistance Performance
More informationThe Fire Resistance Performance of Advantage, Advantage Plus and NOR400 Letterboxes and DV Door Viewers within Timber Based Doorsets
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The Fire Resistance Performance
More informationTitle: The Fire Resistance Performance of Advantage, Advantage Plus and NOR400 Letterboxes and DV Door Viewers within Timber Based Doorsets
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0) 1925 655 116 F : +44 (0) 1925 655 419 E : warrington@exova.com W: www.exova.com Title: The Fire Resistance Performance
More informationENTRY DOOR TEST REPORT. Rendered to: The Vistawall Group
ENTRY DOOR TEST REPORT Rendered to: The Vistawall Group Product: Single 500 Wide Stile Outswing Full-Lite Aluminum Entry Door w/ Standard TH-43 Threshold and Woolpile Weathering Title Air Infiltration@
More informationAluminium Window Scheme to BS4873 & PAS24:2016
SCOPE OF CERTIFICATION Aluminium Window Scheme to BS4873 & PAS24:2016 Manufacturer of Enhanced Security Windows in accordance with the Exova BM TRADA Q-Mark Scheme requirements. (Check with Secured by
More informationTest Report. Test Report Smart Systems Limited incorporating Smart Extrusions. Page 1 of 58
Test Report 8421006. Smart Systems Limited incorporating Smart Extrusions Page 1 of 58 Introduction. This report has been prepared by Adam Pearce and relates to the activity detailed below: Job/Registration
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY SERIES/MODEL: Buffalo Forge Steel Doors / Arch Top Double PRODUCT TYPE: In-swing Arch Top Double Door RH-4-5/8 Title Uniform Load Deflection
More informationDHAR Test Assessment No. DHAR a.1 Page 1 of 3. The Fire Resistance Performance of E+ Doorsets with nominated variation to the Door lockset
Exova Warringtonfire Aus Pty Ltd Unit 2, 409-411 Hammond Road Dandenong, Victoria 3175 T: +61 (0)2 8270 7600 F: +61 (0)2 9299 6076 W: www.exova.com Postal Address: PO Box 4282 Dandenong South, Victoria
More informationTAS 201, TAS 202, TAS 203 and ASTM E330 PERFORMANCE TEST REPORT. Rendered to: DIAMOND DOOR PRODUCTS
Architectural Testing TAS 201, TAS 202, TAS 203 and ASTM E330 PERFORMANCE TEST REPORT Rendered to: DIAMOND DOOR PRODUCTS SERIES/MODEL: Diamond GEM 130 MPH Series PRODUCT TYPE: Out-Swing Steel Entry Door
More information2 AllSeasons Awning and Casement Windows
2 AllSeasons Awning and Casement Windows Summary Performance Awning Casement and Fixed windows Requirement Performance Comments Water and Air Pressure 455Pa 2130Pa 1000Pa 2300Pa Exceeds NZS 4211 2008 Weight
More informationFD30 & FD60 FRAME & DOOR INSTALLATION GUIDE
FD30 & FD60 FRAME & DOOR INSTALLATION GUIDE SUPPORTING CONSTRUCTION The supporting construction may be timber or steel stud plasterboard partition, metal stud demountable partition or masonry wall, but
More informationPERFORMANCE TEST REPORT. Rendered to: GLASSCRAFT DOOR COMPANY. PRODUCT TYPE: 6' x 8' Double Inswing Hardwood Door with Half Circle Transom
PERFORMANCE TEST REPORT Rendered to: GLASSCRAFT DOOR COMPANY PRODUCT TYPE: 6' x 8' Double Inswing Hardwood Door with Half Circle Transom Title Uniform Load Deflection Test Pressure Uniform Load Structural
More informationArchitectural Testing AAMA 501 TEST REPORT. Report Number: C Rendered to: Tubelite, Inc. Walker, Michigan
Architectural Testing AAMA 501 TEST REPORT Report Number: C1529.01-450-44 Rendered to: Tubelite, Inc. Walker, Michigan MODEL DESIGNATION: E4500 PRODUCT TYPE: Non-Thermal Storefront This report contains
More informationASTM E 283, ASTM E 547, AND ASTM E 330 TEST REPORT. Rendered to: SIMPSON DOOR COMPANY
ASTM E 283, ASTM E 547, AND TEST REPORT Rendered to: SIMPSON DOOR COMPANY SERIES/MODEL: Simpson Door Fir 1501 PRODUCT TYPE: Wood Inswing Door with Side Lites Report No: Test Date: 04/02/04 Report Date:
More informationUnexposed face prior to testing
Chiltern House Stocking Lane Hughenden Valley High Wycombe Buckinghamshire HP14 4ND UK Our t +44 (0) 1494 569 800 f +44 (0) 1494 564895 e cif@chilternfire.co.uk w www.chilternfire.co.uk 18 th April 2013
More informationA F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD Experience suggests that the coordination of doorsets with floor levels can be particularly difficult when considering regulations relating to threshold gaps and the possibility
More informationPAS 24:2012 Enhanced security performance requirements for doorsets and windows in the UK. Laboratory Engineer D Knight
Page 1 of 16 Technical Report Report No Product Tested: Test Conducted for: Standard Specified: R16623 Thermal brake window ALTW62 Alumin Techno LLC Selitskogo str. 12-211 220075 FEZ Minsk Minsk Region
More informationA F LCON PANEL PRODUCTS LTD
FA LCON PANEL PRODUCTS LTD 1 General: The performance of building products may be expressed in terms of Thermal Conductivity (lambda-value) OR, Thermal Transmittance (U value): Thermal Conductivity: The
More information9.1. Door Assembly Coordination. Ÿ Architrave is not described in
9.1 Introduction: This document provides for general guidance with regard to the coordination of bespoke door assemblies. The document includes recommendations with regard to the reference points generally
More informationA F LCON PANEL PRODUCTS LTD
& Facings FA LCN PANEL PRDUCTS LTD Door Core General: Strebord doors for internal use should be Lippings, particularly lippings at the closing & lipped on two vertical edges in hardwood as a meeting stiles
More informationSystem 2200 technical information
technical information Glazing Instructions www.rehau.com Construction Automotive Industry Table of Contents 1. General Information.................................. 3 2. Overview of Glazing Stops..............................
More informationMACO MULTI-MATIC. MULTI POWER fully concealed hardware - Tricoat. TILT & TURN Window System INSTALLATION INSTRUCTIONS
MACO MULTI-MATIC TILT & TURN Window System MULTI POWER fully concealed hardware - Tricoat INSTALLATION INSTRUCTIONS 150 kg Key Sash rebate height Sash rebate width Tilt-only window Maximum sash weight
More informationSovereignSeries. SovereignSeries
2 SovereignSeries Overview 21 Awning and Casement Windows 22 Sliding and Stacking Windows and Doors 32 inged Doors 50 Bi-fold and Inline Bi-fold Windows and Doors 62 SovereignSeries 2 SovereignSeries
More informationFLAMEBREAK. Lippings & Facings 1. General: Rev.D
FLAMEBREAK Lippings & Facings 1 General: TM FLAMEBREAK Door Blanks are supplied with mixed tropical hardwood stiles and rails as part of the core structure. The stiles and bottom rail can be removed for
More informationMeasuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware
Recommendations for Measuring Door Gap Dimensions of Swinging Fire Doors with Builders Hardware By Keith E. Pardoe Speed, accuracy, and above all consistency are essential when determining the clearance
More informationCUSTOMER TECHNICAL MEMO # 79
CUSTOMER TECHNICAL MEMO # 79 Subject: Date: 7/8/09 Commercial Sliding Door, View-max Sliding Window & Double Hung Technical Manual Amendments From: Product Development Please be advised there have been
More informationTimber fasteners for structural use
TECHNICAL INFORMATION TIMBER FASTENERS FOR STRUCTURAL USE TESTING AND CERTIFICATION TI-17 V1 Timber fasteners for structural use Testing and certification 01 INTRODUCTION Timber fasteners for structural
More informationCERTIFICATE OF APPROVAL No CF 5428 SEALMASTER
CERTIFICATE OF APPROVAL No CF 5428 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of (A division of Dixon
More informationSTAIRCASES STAIRCASES I DOORS I WINDOWS
STAIRCASES I DOORS I WINDOWS STAIRCASES Stair production at ARU Grupp and supported by ARU Joinery is based on 12 years of experience combined with world-class software solutions and CNC technology. _
More informationMIAMI-DADE COUNTY PERFORMANCE TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California
MIAMI-DADE COUNTY PERFORMANCE TEST REPORT This report contains in its entirety: Cover Page: 1 page Report Body: 14 pages Sketch: 1 page Drawings: 5 pages Report No.: E8384.03-301-18 Rendered to: FLEETWOOD
More informationCERTIFICATE OF APPROVAL No CF 731 ALLGOOD PLC
CERTIFICATE OF APPROVAL No CF 731 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of 63-83 Brearley Street,
More informationASPEN 530 T SINGLE HUNG. Each lite of glass was channel glazed with a reducing vinyl gasket.
TESTED FOR Date : July 29, 2004 FLEETWOOD ALUMINUM PRODUCTS Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed and the
More informationASS 70 FD folding/sliding door installation guide
ASS 70 FD folding/sliding door installation guide 2 Preparation IMPORTANT These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the
More informationMULTI ZERO locking hook for zero barrier threshold systems
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI ZERO locking hook for zero barrier threshold systems Only for use by certified specialists! Not for end users! TILT AND TURN HARDWARE Key Sash
More informationMULTI MAMMUT Heavy-duty hardware
TECHNOLOGY IN MOTION www.maco.eu ASSEMBLY INSTRUCTIONS MULTI MAMMUT Heavy-duty hardware Only for use by certified specialists! Not for end users! TILT AND TURNHARDWARE Key/abbreviations Sash rebate height
More informationLiniar Window. installation guide
Liniar Window installation guide This installation guide is designed to show you the best way to fit Liniar windows, and covers all styles of window made from Liniar s lead-free 70mm PVCu profile. Not
More informationCERTIFICATE OF APPROVAL No CF 284 INTUMESCENT SEALS
CERTIFICATE OF APPROVAL No CF 284 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of The Old Brewery, Pampisford,
More informationCERTIFICATE OF APPROVAL No CF 581 CGI INTERNATIONAL LIMITED
CERTIFICATE OF APPROVAL No CF 581 This is to certify that, in accordance with TS General Requirements for Certification of Fire Protection Products The undermentioned products of International House, Millfield
More informationCERTIFICATE OF APPROVAL No CF SEALMASTER (A division of Dixon International Group Ltd)
CERTIFICATE OF APPROVAL No CF 5387 1 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of (A division of Dixon
More informationLEADING WINDOW & DOOR SYSTEMS
intec LEADING WINDOW & DOOR SYSTEMS Wintec Aluminium Since our beginning in 1997, we have developed a range of window and door products that are innovative, functional and stylish. Wintec Aluminium windows
More informationCERTIFICATE OF APPROVAL No CF 718 PILKINGTON GROUP LIMITED
CERTIFICATE OF APPROVAL No CF 718 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Prescot Road, St. Helens
More informationGeneral guidance. L20Doors/ Shutters/ Hatches. 1 Fire doors
Doors/ Shutters/ Hatches General guidance 1 Fire doors 1 Fire Doors For guidance on specifying fire resisting doors, see: BS 8214. TRADA Wood Information, Section 1, sheet 13. Both the Building Regulations
More informationJAMESTOWN175 SERIES Fixed, Projected and Casement Steel Windows
Fixed, Projected and Casement Steel Windows Hope s Jamestown Series steel windows are manufactured from heavy custom hot-rolled steel profiles. All frames, ventilators and muntin bars are -/" in depth.
More informationASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California
This report contains in its entirety: Cover Page: 1 page Report Body: 11 pages Sketch: 1 page Drawings: 12 pages ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E8390.02-301-18 Rendered to: FLEETWOOD
More informationASTM E1886 and ASTM E1996 TEST REPORT. Rendered to: FLEETWOOD WINDOWS AND DOORS Corona, California
This report contains in its entirety: Cover Page: 1 page Report Body: 11 pages Sketch: 1 page Drawings: 5 pages ASTM E1886 and ASTM E1996 TEST REPORT Report No.: E8384.02-301-18 Rendered to: FLEETWOOD
More informationThermally Broken Framing and Door Installation
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation IMPORTANT: Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Thermally Broken Framing and Door Installation SL-450TB (2" x 4-1/2" with 1" Glazing) & SL-600TB (2" x 6" with 1" Glazing) IMPORTANT: Read all instructions before beginning installation.
More informationTPS 49 EDITION 2 JUNE 2009
TPS 49 EDITION 2 JUNE 2009 Interim arrangements & guidance on the interpretation of IEC 61672 Sound Level Meters - Periodic Tests CONTENTS SECTION PAGE 1 Purpose and duration 2 2 Statement 2 3 Specific
More informationASTM E 1886 and ASTM E 1996 TEST REPORT. Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California
Architectural Testing ASTM E 1886 and ASTM E 1996 TEST REPORT Report No.: D1090.02-301-44 Rendered to: PRL ALUMINUM ARCHITECTURAL PRODUCTS City of Industry, California PRODUCT TYPE: Bi-Fold Door SERIES/MODEL:
More informationCoFold Non-Mortice. Fitting Instructions for top hung exterior folding doors SYSTEM CAPACITY. Diagram 1. Diagram 2. Diagram 3.
1 CoFold Non-Mortice Fitting Instructions for top hung exterior folding doors Diagram 1 SYSTEM CAPACITY Maximum leaf height Maximum leaf weight Maximum leaf width Maximum leaf thickness - 3300mm - 100kg
More informationAMBICO Limited Section and WOOD BULLET RESISTANT DOORS AND FRAMES Page 1
Page 1 This section includes AMBICO Bullet Resistant, Wood Doors and Bullet Resistant Steel Frames which meet the UL752 Standard for Bullet-Resisting Equipment. This section relies on both the Canadian
More informationFix Out Carpentry. Carpentry - Residential Construction. Product Code: 5594
E PL SA M Fix Out Carpentry Carpentry - Residential Construction Product Code: 5594 Publishing details: Second Edition 2012 TAFE NSW Training and Education Support, Industry Skills Unit Orange and Granville
More informationCERTIFICATE OF APPROVAL No CF 767 RUTLAND UK
CERTIFICATE OF APPROVAL No CF 767 This is to certify that, in accordance with TS00 General Requirements for Certification of Fire Protection Products The undermentioned products of Whittington Way, Chesterfield,
More informationPFPF and FTSG Agreed Assessment Rules for: Timber Based Doorset. FTSG N288 (e)
PFPF and FTSG Agreed Assessment Rules for: Timber Based Doorset FTSG N288 (e) 03 December 2004 PFPF and FTSG Agreed Assessment Rules for: Timber Based Doorsets Introduction The aim of the document is to
More informationSCW Series Product Assembly Manual 2008 SCW CURTAIN WALL
SCW Series Product Assembly Manual 2008 SCW CURTAIN WALL 2.1.ii 07.08 SCW Curtain Wall Introduction The Company Senior Aluminium Systems are a group of companies based in the United Kingdom supported through
More informationAdjustment Has adjustment strike block screw for sealing action adjustment.
RP8 Si A concealed, acoustic automatic door bottom silicon seal for medium temperature smoke and fire door applications. RP8Si is spring loaded to lift clear off the floor as soon as the door leaf is opened
More informationWA7000. (rev )
M-Series Push-Out Casement WA7000 Copyright 2018 Reveal Windows & Doors All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without permission by Reveal
More information.crealco Interlockers & Meeting Stiles Limitation Chart Cross Sectional Detail Sidelight Bottom Rail Assembly of Side Light Adaptor
. crealco E L I T E ELITE HORIZONTAL PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: November 2013 . crealco E L I T E INDE Legal Disclaimer 3 Profile Identification 4 Hardware Identification
More informationTECHNOLOGY IN MOTION MACO TILT AND TURN FITTINGS. MULTI POWER fully concealed fittings INSTALLATION INSTRUCTIONS
TECHNOLOGY IN MOTION MACO multi-matic TILT AND TURN FITTINGS INSTALLATION INSTRUCTIONS Key Sash rebate height Sash rebate width Tilt-only window 50 kg Maximum sash weight 2 Contents Applications/processing
More informationGLENWOOD 510 C Horizontal Slider
TESTED FOR Date : October 28, 1998 FLEETWOOD ALUMINUM PRODUCTS, Inc. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
More informationPage 1 of Ch 6. A Lecture note on Building Technology By Kishor Thapa
CHAPTER-6 Doors and windows 6.1 Doors: frames, shutters and their fixing details The function of a door is to give access to building and to different parts of the building and to deny the access whenever
More informationWestern Red Cedar WINDOW & DOOR COMPONENTS. edition B - July for more product details and other technical information
Western Red Cedar WINDOW & DOOR COMPONENTS edition B - July 2014 for more product details and other technical information www.timbeck.com.au INDEX Timbeck Window & Door Components Page Windows & Doors
More informationTitle: WF Report No: FEA/F98164 Revision M. WF Contract No: Prepared for: Pacific Rim Wood Ltd
Title: Global Fire Resistance Assessment of Flamebreak Doorsets 30 Minutes Fire Resistance Valid From: 23 rd February 2018 Valid Until: 23 rd February 2023 WF Report No: WF Contract No: 396630 Prepared
More informationSECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationTESTED FOR Report No. : A04H-009 Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of Railroad Street Corona, CA 91720
TESTED FOR Date : February 10, 2004 FLEETWOOD ALUMINUM PRODUCTS, INC. Page : 1 of 5 2485 Railroad Street Corona, CA 91720 1.0 PURPOSE The purpose of this report is to present the testing methods employed
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationContact person Date Reference Page Jonas Hafmar F006532A 1 (3) Wood Technology
issued by an Accredited Testing Laboratory Contact person Jonas Hafmar 2014-04-28 4F006532A 1 (3) Wood Technology +46 10 516 58 58 Jonas.Hafmar@sp.se 1002 ISO/IEC 17025 Hyllteknik, AB Box 132 342 22 ALVESTA
More informationSGS United Kingdom Ltd. International Electrical Approvals. Electromagnetic Compatibility. RF Card Entry System. PAC International Ltd.
South Industrial Estate Bowburn Co. Durham DH6 5AD United Kingdom Tel: +44 (0) 191 377 2000 Fax: +44 (0) 191 377 2020 email: sgsiea@sgs.com SGS United Kingdom Ltd. International Electrical Approvals Electromagnetic
More informationInstallation Instruction 3-D Model 3D 03/01/17. 0 Flush Siding Horizontal System N/C WPS, Inc.
I B D L K C E G M F A H J Installation Instruction 3-D Model 3D 03/01/17 Detail: System Type: Scale: Drawn By: 0 Flush Siding Horizontal System N/C WPS, Inc. Wall Panel System, Inc. 15/16" 1 1/4" Bottom
More informationTHERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE)
THERMO-FIT REPLACEMENT WINDOW INSTALLATION INSTRUCTIONS (BRICKMOULD / NO NAILING FLANGE) fig.3 Casement, Awning, Fixed Casement, Direct-Set, Double-Hung, Single-Hung & Horizontal Slider Windows Materials
More information. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R Index Legal Disclaimer 4 Profile Identification 5-7 Hardware Identification 8
. crealco V I S TA F O L D B O T T O M R O L L E R F O L D I N G D O O R VISTAFOLD SYSTEM PRODUCT MANUAL 2013 Wispeco (Pty) Ltd, All Rights Reserved Revision: June 2013 . crealco V I S TA F O L D B O T
More informationSeries 6000 Vinyl Single Hung
Series 6000 Horizontal Slider Series 6000 Vinyl Single Hung Contents List of Architectural Drawings...6000SH - 3 Elevations - Single Hung...6000SH - 4 Available Sizes - Single Hung...6000SH - 5 Series
More informationXL JOINERY LTD LA PORTE VISTA MODULAR 3 ASSEMBLY INSTRUCTIONS
XL JOINERY LTD LA PORTE VISTA MODULAR 3 2090mm High x 4687mm Wide ASSEMBLY INSTRUCTIONS READ AND UNDERSTAND THESE INSTRUCTIONS FULLY PRIOR TO STARTING INSTALLATION. IT IS STRONGLY RECOMMENDED THAT A COMPETENT
More informationTHE B6 HEEL BEAD SEAL SECURITY GLAZING SYSTEM
THE B6 GLAZING SYSTEM GLAZING SYSTEMS FOR JUNE 2009 THE B6 HEEL BEAD SEAL SECURITY GLAZING SYSTEM Page 1 DESCRIPTION The B6 Heel Bead Seal Security Glazing System is suitable for installing all types of
More informationHOLLOW METAL DOOR/WINDOW SYSTEM FOR THERMALSAFE CF WALLS WINDOW ASEMBLY GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY
HOLLOW METAL DOOR/WINDOW SYSTEM FOR THERMALSAFE CF WALLS WINDOW ASEMBLY GUIDE PIONEERING INSULATED METAL PANEL TECHNOLOGY PIONEERING INSULATED METAL PANEL TECHNOLOGY TABLE OF CONTENTS DETAIL TITLE PAGE
More informationAPA Performance Rated Rim Boards
D a t a F i l e APA Performance Rated Rim Boards A Rim Board is the wood component that fills the space between the sill plate and bottom plate of a wall or, in second floor construction, between the top
More informationSeries 9000 Vinyl Single Hung
Series 9000 Single Hung Series 9000 Vinyl Single Hung Contents List of Architectural Drawings...9000SH - 3 Elevations - Single Hung...9000SH - 4 Available Sizes - Single Hung...9000SH - 5 Elevations -
More informationSPLIT FRAME INSTALLATION INSTRUCTIONS
SPLIT FRAME INSTALLATION INSTRUCTIONS Revised 2014/09/29 Guillaume Gauthier, Eng. Product Manager RECEIPT OF MERCHANDISE... 2 INSTALLATION... 2 SPLIT FRAME COMPONENTS... 3 TOOLS, HARDWARE AND PARTS...
More informationTitle: Global Assessment Blankfort 30 & Blankfort 30+ Doorsets for 30 Minutes Fire Resistance. Report No: Chilt/A12151 Rev D. WF Contract:
Title: Global Assessment Blankfort 30 & Blankfort 30+ Doorsets for 30 Minutes Fire Resistance. Report No: WF Contract: 391845 Valid 12 th November 2017 Valid Until: 12 th November 2022 Prepared for: Blankfort
More information173.1 INTRODUCTION SERIES 453 RESIDENTIAL DOUBLE-HUNG WINDOW INTO FRAMING. Australian Registered Design. Design Features :
INTRODUCTION DATE JUN 06 REPLACES NOV 04 SCALE NOT TO SCALE Design Features : Vertical sliding double-hung sashes inlaid directly into shopfront framing. Flyscreens tuck into dedicated recess in the jamb
More informationASS 70 FD folding / sliding door. Installation Guide
ASS 70 FD folding / sliding door Installation Guide IMPORTANT! These doors should be fitted by competent and trained installers. Please read these instructions thoroughly before beginning the installation.
More informationKestrel Aluminium Systems Limited. Product Manual Section 22 TB Commercial Door. Manual Version
Kestrel Aluminium Systems Limited Product Manual Section 22 TB Commercial Door Manual Version 23.0.1 PAS24: 2012 Section 22.01 Product Specification 22.01.01 sheet 1 Product specification 22.01.01 sheet
More informationseries 9500 top load bi4fold installation instructions
instructions Head Deflection (+0.12 / -0.00 ) Right Jamb Note: This is a top hung product. Provide adequate structure at head. Continuous threshold support is required. Left Jamb Head 4Lay bed of sealant
More informationASSESSMENT IN LIEU OF TEST CONSULTATION RESPONSE
May 2018 ASSESSMENT IN LIEU OF TEST CONSULTATION RESPONSE Question 3 Question 1 Name: David Cooper Position (if applicable): Fire Safety Engineering Manager Organisation (if applicable): Address (if applicable):
More informationInstallation Instructions
TEL: 09 579-8895 FAX: 09 579-2933 EMAIL: sales@nzfiredoors.co.nz NZ Fire Doors Ltd, 89 Gavin Street, Ellerslie, PO Box 12709, Penrose 1642, Auckland, New Zealand. www.nzfiredoors.co.nz Installation Instructions
More informationHeavy Wall Applied Stop Tube Frame and Door Installation
INSTALLATION INSTRUCTIONS Heavy Wall Applied Stop Tube Frame and Door Installation Read all instructions before beginning installation. These instructions are provided to help prevent installation problems
More informationInstallation Guide. Evolve bi-fold. 8. Door restrictor- optional p9. 1. Before you start p2. 9. Adjustment. 2. Measuring and surveying p2
Evolve bi-fold Installation Guide 1. Before you start p2 8. Door restrictor- optional p9 2. Measuring and surveying p2 3. Configuration details p4 4. Installation p5 5. Glazing p5 6. Glazing packer details
More informationDELTA Test Report. Performed for INWIDO Denmark A/S. DANAK 100/2331 Project no.: Page 1 of October 2017
DELTA Test Report TEST Reg. no. 100 Laboratory measurement of airborne sound insulation of a INWIDO Denmark A/S coupled sidehung construction with Float 6 mm glass in the external sash and a Float 3145
More informationSECTION HOLLOW METAL DOORS AND FRAMES
PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 08 11 13 HOLLOW METAL DOORS AND A. Non-fire-rated hollow metal doors and frames. B. Hollow metal frames for wood doors. C. Fire-rated hollow metal doors and
More informationThe WANZ Guide to Window Installation
The WANZ Guide to Window Installation as described in E2/AS1 Amendment 5 1 October 2012 Ver. 1.2 Window Association of New Zealand Page 2 of 74 Contents Overview Page 5 Objective Page 5 Scope Page 5 Opening
More informationfor Andersen 400 Series Woodwright Transom over 400 Series Woodwright Double-Hung or 400 Series Woodwright Picture Window
for Andersen 400 Series Woodwright Transom over 400 Series Woodwright Double-Hung or 400 Series Woodwright Picture Window Congratulations! You have just purchased one of the many fine Andersen products.
More informationSeries 9000 Vinyl Fixed Window
Series 2030 Picture Window Series 9000 Vinyl Fixed Window Contents List of Architectural Drawings... 9000PW - 3 Elevations - 9000 Fixed... 9000PW - 4 Available Sizes - 9000 Fixed... 9000PW - 5 Elevations,
More informationSeries 525 LouvreMASTER Adjustable Louvre Window
Series 525 LouvreMASTER Adjustable Louvre Window DESIGNER SERIES Photo courtesy of Hanlon Windows Australia DATE: NOVEMBER 2009 REPLACES: AUGUST 2003 DESIGNER SERIES Series 525 KEY EATURES / PERORMANCE
More information6.1. Glass & Glazing General
General 6.1 General: Doors are glazed primarily for the safety of users of a building. However, glazing is often used as a means for expressing aesthetic considerations. Flamebreak provides for a stable
More informationContents GROUP SECTION DESCRIPTION. Page. Rapier Star SCREW FIXING GUIDE. General. General cont... General cont... Casement Window: Reinforced
Contents GROUP SECTION DESCRIPTION Page 1 GENERAL 1.1 Main Profiles Main Profiles 1 1.2 Accessory Profiles Extensions & Coupling Profiles Cills & Glazing Beads 1 2 2 FABRICATION 2.1 Sections Double Door
More informationVisions 2000 Single Hung Tilt Window Parts Reference Catalog
Visions 2000 Single Hung Tilt Window Parts Reference Catalog (Includes Parts and Information for Single Hung Tilt Picture and Basement and Miscellaneous Parts for Single Hung Tilt Oriel and Single Hung
More informationThe Duraflex Diamond Suite range of profiles are premium products that are attractive, sturdy and offer trouble free performance.
Technical Manual Introduction On behalf of the UK Window Group we would like to thank you for choosing our products and trust we can continue to grow a mutually beneficial trading relationship going forward.
More informationTest report No
Exova Warringtonfire, Frankfurt Industriepark Höchst, C369 Frankfurt am Main D-65926 Germany T : +49 (0) 69 305 3476 F : +49 (0) 69 305 17071 E : EBH@exova.com W: www.exova.com Test report No. 2017-1118
More information