MACO MULTI-MATIC. MULTI POWER fully concealed hardware - Tricoat. TILT & TURN Window System INSTALLATION INSTRUCTIONS

Transcription

1 MACO MULTI-MATIC TILT & TURN Window System MULTI POWER fully concealed hardware - Tricoat INSTALLATION INSTRUCTIONS

2 150 kg Key Sash rebate height Sash rebate width Tilt-only window Maximum sash weight Page 2

3 Applications / processing information kg/m² 60 kg/m² 50 kg/m² 40 kg/m² : 1, max. 150 kg 1 Application diagram 2 Maximum sash weight For 3-sashed window max. 80 kg! 3 Page 3

4 Single Tilt & Turn Window - Exploded Parts View Page 4

5 Single Tilt & Turn Window Hardware List FRAME COMPONENTS Coastal Part # Supplier # TT-MMP08-TR MM Power Scissor Stay Arm 600/800 13V Right Hand TT-MMP09-TR MM Power Scissor Stay Arm 600/800 13V Left Hand TT-MMP10-TR MM Power Scissor Stay Arm 1050/ V Right Hand TT-MMP11-TR MM Power Scissor Stay Arm 1050/ V Left Hand TT-MMP16-TR MM Power Pivot Post 13V Left Hand TT-MMP17-TR MM Power Pivot Post 13V Right Hand TT-MMP18-TR MM Power Pivot Post Cover Right Hand TT-MMP19-TR MM Power Pivot Post Cover Left Hand TT-MMP20-TR MM Power Screws for Hinges TT-MMP23-TR is Strike Frame Keep TT-MMP24-TR MM is TBT Frame Strike TT-MMP25-TR Stabilizing Stay Striker Plate TT-MMP35-TR Bottom Hinge Frame Dowel (Cill) TT-MMP43-TR MM Sash Lifter Right Hand TT-MMP44-TR MM Sash Lifter Left Hand SASH COMPONENTS Coastal Part # Supplier # TT-MMP01-TR MM Short Corner Element with 1 is Cam TT-MMP02-TR MM Security Corner Element with 2 is Cams TT-MMP03-TR MM Power Scissor Stay Faceplate 600mm TT-MMP04-TR MM Power Scissor Stay Faceplate 800mm TT-MMP05-TR MM Power Scissor Stay Faceplate 1050mm TT-MMP06-TR MM Power Scissor Stay Faceplate 1300mm TT-MMP07-TR MM TBT Stabilizing Stay TT-MMP12-TR Faceplate Ext 235 without Serrated Carrier with 1 is Cam TT-MMP13-TR Faceplate Extensions B-TV 500mm with 1 is Cam TT-MMP14-TR Faceplate Extensions B-TV 750mm with 1 is Cam TT-MMP15-TR Centre Locks Extendable 1280mm with 1 is Cam TT-MMP21-TR MM Power Corner Support Right Hand TT-MMP22-TR MM Power Corner Support Left Hand TT-MMP26-TR Adaptor Pieces TT-MMP27-TR MM 15mm VHH Drive Gear 800mm with No is Cams TT-MMP28-TR MM 15mm VHH Drive Gear 1250mm with 1 is Cam TT-MMP29-TR MM 15mm VHH Drive Gear 1750mm with 2 is Cams TT-MMP30-TR MM 15mm VHH Drive Gear 2250mm with 3 is Cams TT-MMP31-TR MM Hinge Side Corner Element with 1 is Cam Faceplate TT-MMP34-TR Extensions B-TV 1000mm with 2 is Cams TT-MMP36-TR Faceplate Ext Extendable 235 with 1 is Cam TT-MMP38-TR Centre Locks Single Piece Extendable with 1 is Cam TT-MMP66-TR Faceplate Ext 235 without Serrated Carrier with 1 is Cam ADDITIONAL COMPONENTS Coastal Part # Supplier # TT-MMP39-TR Tilt Restrictor for Stay Gr 00-1 (400/600/800) (Only Required in Certain Scenarios) TT-MMP40-TR Tilt Restrictor for Stay 1050/1300 (Only Required in Certain Scenarios) TT-MMP41-TR Stab Stay Tilt Restrictor (Only Required in Certain Scenarios) Page 5

6 Double Tilt & Turn Window - Exploded Parts View Page 6

7 FRAME COMPONENTS Double Tilt & Turn Window Hardware List Coastal Part # Supplier # TT-MMP08-TR MM Power Scissor Stay Arm 600/800mm 13V Right Hand TT-MMP09-TR MM Power Scissor Stay Arm 600/800mm 13V Left Hand TT-MMP10-TR MM Power Scissor Stay Arm 1050/1300mm 13V Right Hand TT-MMP11-TR MM Power Scissor Stay Arm 1050/1300mm 13V Left Hand TT-MMP16-TR MM Power Pivot Post 13V Right Hand TT-MMP17-TR MM Power Pivot Post 13V Left Hand TT-MMP18-TR MM Power Pivot Post Cover Right Hand TT-MMP19-TR MM Power Pivot Post Cover Left Hand TT-MMP20-TR MM Power Screws for Hinges TT-MMP23-TR is Striker Frame Keep TT-MMP24-TR MM is TBT Frame Strike TT-MMP25-TR Stabilizing Stay Striker Plate TT-MMP35-TR Bottom Frame Hinge Dowel TT-MMP64-TR MM Power Turn Only Scissor Stay Arm 13V Right Hand TT-MMP65-TR MM Power Turn Only Scissor Stay Arm 13V Left Hand SASH COMPONENTS Coastal Part # Supplier # TT-MMP02-TR MM Security Corner Element with 2 is Cams TT-MMP03-TR MM Power Scissor Stay Faceplate 600mm TT-MMP04-TR MM Power Scissor Stay Faceplate 800mm TT-MMP05-TR MM Power Scissor Stay Faceplate 1050mm TT-MMP06-TR MM Power Scissor Stay Faceplate 1300mm TT-MMP07-TR MM TBT Stabilizing Stay TT-MMP13-TR Faceplate Extensions B-TV 500mm with 1 is Cam TT-MMP14-TR Faceplate Extensions B-TV 750mm with 1 is Cam TT-MMP15-TR Centre Locks Extendable 1280mm with 1 is Cam TT-MMP21-TR MM Power Corner Support Right Hand TT-MMP22-TR MM Power Corner Support Left Hand TT-MMP26-TR Adapter Pieces TT-MMP31-TR MM Hinge Side Corner Element with 1 is Cam TT-MMP34-TR Faceplate Extensions B-TV 1000mm with 2 is Cams TT-MMP38-TR Centre Locks Single Piece Extendable with 1 is Cam TT-MMP46-TR MM Corner for Bottom of Drive Gear TT-MMP47-TR T&T Drive Gears BS 431/660mm 15 FHH with no is Cams TT-MMP48-TR T&T Drive Gears BS 661/840mm 15 FHH with 1 is Cam TT-MMP49-TR T&T Drive Gears BS 841/1090mm 15 FHH with 1 is Cam TT-MMP50-TR T&T Drive Gears BS 1091/1340mm 15 FHH with 1 is Cam TT-MMP51-TR T&T Drive Gears BS 1341/1590mm 15 FHH with 2 is Cams TT-MMP52-TR T&T Drive Gears BS 1591/1700mm 15 FHH with 2 is Cams TT-MMP53-TR T&T Drive Gears BS 1701/1950mm 15 FHH with 3 is Cams TT-MMP54-TR T&T Drive Gears BS 1951/2200mm 15 FHH with 3 is Cams TT-MMP55-TR T&T Drive Gears BS 2201/2450mm 15 FHH with 4 is Cams TT-MMP56-TR MM Hinge Side Corner Element with 1 is Cam TT-MMP58-TR Sashed with 1 is Cam and Striker TT-MMP60-TR MM Power Turn Only Scissor Stay Faceplate 600mm TT-MMP61-TR MM Power Turn Only Scissor Stay Faceplate 800mm TT-MMP62-TR MM Power Turn Only Scissor Stay Faceplate 1050mm TT-MMP63-TR MM Power Turn Only Scissor Stay Faceplate 1300mm TT-MMP67-TR French Casement Drive Gears for Eurogroove FFH 600mm TT-MMP68-TR French Casement Drive Gears for Eurogroove FFH 840mm TT-MMP69-TR French Casement Drive Gears for Eurogroove FFH 1090mm TT-MMP70-TR French Casement Drive Gears for Eurogroove FFH 1340mm TT-MMP71-TR French Casement Drive Gears for Eurogroove FFH 1590mm TT-MMP72-TR French Casement Drive Gears for Eurogroove FFH 1700mm TT-MMP73-TR French Casement Drive Gears for Eurogroove FFH 1950mm TT-MMP74-TR French Casement Drive Gears for Eurogroove FFH 2200mm TT-MMP75-TR French Casement Drive Gears for Eurogroove FFH 2450mm Page 7

8 Applications / processing information Max. 7,2 min.24 4,5 Min.* Max. 38 min max.20 Min.** 4,5 min. 3 4 Applications: For restrictor * with corner element 1 i.s. SRW 465 mm ** with MACO restrictor and cleaning stay Use a stabilising scissor-stay for SRW Use supporting dowels (36668) to sash weight. 7 Overlap: Grind at the overlap (without proper tilting of the window sash. Clean constructional soiling from hardware and grease. properly. Non-observance will render 5 Screw dimension: For fastening the pivot post and scissor stay hinge in TIMBER and PVC. Use special screw 4.5x38 Fastening acc. to TBDK! Timber: contact. PVC: the screw connection must go through the steel reinforcement. 6 Rebate depth: min. 24 mm Air gap: min mm Page 8

9 components Installing the scissor arm with jig Place the scissor stay arm with hinge and screw to fasten. Installing the pivot post Place the pivot post and screw to fasten. 60Kg sash weight Page 9

10 components Installing the cover 1 1 Open the pivot post 2 2 Insert the cover in the corners Page 10

11 components Installing the cover 3 3 Clip the cover onto the base plate. Air gap: min mm Sash rebate depth: min. 24 mm Page 11

12 components All dimension refer to the dimensions: 12 mm air gap 115 D B2 B1 A + A1 + A2 + A3 Sash lifter B Handle position (= centre of spindle) C Page 12

13 components gap Large drive gear A Faceplate extension/ centre lock C B scissor-stay size D 565 Page 13

14 Installation of the sash components Handle drill hole Dimension X Size 1 X (Ø 3 Ø 3 Ø 3) (Ø 12 Ø 3 Ø 12) 2 Edge of sash rebate rebate and pre-drill using Ø 3 mm and Ø 12 mm drills. on sash and apply the drive gear drilling Page 14

15 Installation of the sash components Handle drilling-hole patterns PVC for window handle with 2 Timber for window handle with 12 mm lug Page 15

16 Installation of the sash components ,3 3 0, Page 16

17 Installation of the sash components 1 Insert Corner element and fasten. 2 Insert Corner element horizontally and fasten. 3 Cut Drive gear corner element horizontally in parallel and fasten together with the Corner elements.** 4 Insert Corner element vertically and 5 Cut corner element horizontally in parallel and fasten together with the corner elements. 6 Insert Centre lock and fasten (from 7 Insert C and fasten. 8 and/or opening restrictor. the centre anchors are released. The sash lifter on the drive gear must be activated by rotating it outwards. Page 17

18 Installation of the sash components support 2. Timber: Insert the mounting strap in the PVC:! Turn limiter with shortened! Turn limiter with extended Page 18

19 Installation of the sash components corner support 2. Timber: opening restrictor with sloped screw fixing into the rebate. PVC: see profile sheets Page 19

20 Hinge the T&T sash Open the safety catch of the scissor-stay arm 1 sor-stay arm up against the frame Perform mishandling at the mishandling device 4 and turn the handle to tilt position 5. Place the sash tilted slightly parallel to the frame on both pivot post bolts 6. Page 20

21 Hinge the T&T sash Fold out the scissor stay arm 7 and press into the scissor stay faceplate 8 so that the scissor stay arm bolts engage in the scissor stay faceplate. Close the scissor stay are retainer 9 Perform mishandling at the mishandling device and turn the handle to turn position 11. See video Page 21

22 Hinging the rotatable sash Open the safety catch of the scissor-stay arm 1 scissor-stay arm up against the frame Place the sash tilted slightly parallel to the frame on both pivot post bolts 4. the drive gear side 5 and fold out the turn arm 6. Page 22

23 Hinging the rotatable sash Press the turn arm onto the turn faceplate and lift the sash on the drive gear side 7. Then press in the turn arm 8 so that the turn arm bolts engage in the turn faceplate. arm retainer 9. See video Page 23

24 Unhinge T&T sash Perform mishandling at the mishandling device 2 and turn the handle to tilt position 3. Open scissor-stay arm with SW4 Allen Lift the scissor-stay arm 5 so that the scissor stay arm bolts are free. Then fold the scissor stay arm 6. Page 24

25 Unhinge T&T sash Perform mishandling at the mishandling device 7 and turn the handle to turn position 8 and close the sash. Tilt the sash slightly and lift it up and out along the frame 9. See video Page 25

26 Unhinge the turn-only sash Lift the turn arm 3 are free. Lower the sash slightly on the drive gear side Close the sash Tilt the sash slightly and lift it up and out along the frame 6. See video Page 26

27 Settings 1a 1b 1a Turn out the safety catch in the desired lifter is subsequently fully operational. Set to the required height by turning the 1b Bring the lever to its centre position. In Page 27

28 Settings Compression 1 2 * + * + * Standard 1 Locking cam Scissor stay. Page 28

29 Settings Compression 4 4 ± 1 mm with SW 4 Compression 5 5 Pivot post Page 29

30 Settings / 1 mm with SW Scissor stay are with hinge and T&T hinge arm with hinge + Page 30

31 Settings / 1 mm with SW 4 Page 31

32 Safety and neglect instruction Do not press sashes up against the 3 Do not insert anything in the opening gap in the opening gap between the sash and frame. 5 6 Do not leave sashes open in the turnmode during strong winds. Page 32

33 Operating instructions * Only use cleaning and maintenance 4 Security-relevant hardware components must be examined for wear and tear at Clean constructional soiling from hardware and grease the hardware. Page 33

34 Maco Tricoat Tilt & Turn Part Identification Below are images of the Tilt & Turn parts, in conjunction with the A1 drawings you should be able to identify the parts and where they live within the product. Coastal Part TT-MMP01-TR MM Short Corner Element with 1 is Cam [Single Window Sash] Coastal Part TT-MMP02-TR MM Security Corner Element with 2 is Cams [Single & Double Master Window Sash] Page 34

35 Coastal Part TT-MMP03-TR (a) TT-MMP04-TR (b) TT-MMP05-TR (c) TT-MMP06-TR (d) (a) (b) (c) (d) MM POWER Scissor Stay Faceplate (a) 600mm (b) 800mm (c) 1050mm (d) 1300mm Coastal Part TT-MMP07-TR MM TBT Stabilizing Stay [Single & Double Master Window Sash] Page 35

36 Coastal Part TT-MMP08-TR (a) TT-MMP09-TR (b) TT-MMP10-TR (c) TT-MMP11-TR (d) (a) (b) (c) (d) MM POWER Scissor Stay Arm 13V a) 600/800 Right Hand b) 600/800 Left Hand c) 1050/1300 Right Hand d) 1050/1300 Left Hand Coastal Part TT-MMP12-TR TT-MMP66-TR Faceplate Extension 235mm without Serrated Carrier, with 1 is Cam [Single, Double Master & Slave Window Sash] Page 36

37 Coastal Part TT-MMP13-TR (a) TT-MMP14-TR (b) (a) (b) Faceplate Extensions B-TV 500mm with 1 is Cam a) 500mm b) 750mm [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP15-TR Centre Lock Extendable 1280 with 1 is Cam [Single, Double Master & Slave Window Sash] Page 37

38 Coastal Part TT-MMP16-TR MM POWER Pivot Post 13V Right Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP17-TR MM POWER Pivot Post 13V Left Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP18-TR MM POWER Pivot Post Cover Right Hand [Single, Double Master & Slave Window Sash] Page 38

39 Coastal Part TT-MMP19-TR MM POWER Pivot Post Cover Left Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP20-TR MM POWER Screws for Hinges [Single, Double Master & Slave Window Sash] Page 39

40 Coastal Part TT-MMP21-TR MM POWER Corner Support Right Hand [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP22-TR MM POWER Corner Support Left Hand [Single, Double Master & Slave Window Sash] Page 40

41 Coastal Part TT-MMP23-TR is Frame Strike [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP24-TR MM is TBT Frame Strike [Single & Double Master Window Sash] Page 41

42 Coastal Part TT-MMP25-TR Stabilizing Stay Striker Plate [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP26-TR Adaptor Pieces [Single, Double Master & Slave Window Sash] Page 42

43 Coastal Part TT-MMP27-TR (a) TT-MMP28-TR (b) TT-MMP29-TR (c) TT-MMP30-TR (d) (a) (b) (c) (d) (a) MM 15mm VHH Drive Gear 800 with No is Cams (470/800mm) (b) MM 15mm VHH Drive Gear 1250mm with 1 is Cam (801/1250mm) (c) MM 15mm VHH Drive Gear 1750mm with 2 is Cams (1251/1750mm) (d) MM 15mm VHH Drive Gear 2250mm with 3 is Cams (1751/2250mm) [Single & Double Master Window Sash] Page 43

44 Coastal Part TT-MMP31-TR MM Hinge Side Corner Element with 1 is Cam [Single & Double Slave Window Sash] Coastal Part TT-MMP34-TR Faceplate Extensions B-TV 1000mm with 2 is Cams [Single, Double Master & Slave Window Sash] Page 44

45 Coastal Part TT-MMP35-TR Bottom Hinge Frame Dowel (CILL) [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP36-TR Faceplate Ext Extendable 235 with 1 is Cam [Single Window Sash] Page 45

46 Coastal Part TT-MMP38-TR Centre Locks Single Piece Extendable with 1 is Cam [Single, Double Master & Slave Window Sash] Coastal Part TT-MMP39-TR Tilt Restrictor for Stay Gr 00 1 (400/600/800) [Single Window Sash] Coastal Part TT-MMP40-TR Tilt Restrictor for Stay (1050/1300) [Single Window Sash] Page 46

47 Coastal Part TT-MMP41-TR Stab Stay Tilt Restrictor [Single Window Sash] Coastal Part TT-MMP43-TR MM Sash Lifter Right Hand [Single Window Sash] Coastal Part TT-MMP44-TR MM Sash Lifter Left Hand [Single Window Sash] Page 47

48 Coastal Part TT-MMP46-TR MM Corner for Bottom of Drive Gear [Double Slave Window Sash] Coastal Part TT-MMP47-TR (a) TT-MMP48-TR (b) TT-MMP49-TR (c) TT-MMP50-TR (d) TT-MMP51-TR (e) TT-MMP52-TR (f) TT-MMP53-TR (g) TT-MMP54-TR (h) TT-MMP55-TR (i) (a) (b) (c) (d) (e) (f) (g) (h) (i) T & T Drive Gear BS 15 FHH (a) (431/660) with No is Cams (b) (661/840) with 1 is Cam (c) (841/1090) with 1 is Cam (d) (1091/1340) with 1 is Cam (e) (1341/1590) with 2 is Cams (f) (1591/1700) with 2 is Cams (g) (1701/1950) with 3 is Cams (h) (1951/2200) with 3 is Cams (i) (2201/2450) with 4 is Cams [Double Master Window Sash] Page 48

49 Coastal Part TT-MMP58-TR Sashed with 1 is Cam and Striker [Double Slave Window Sash] Coastal Part TT-MMP60-TR (a) TT-MMP61-TR (b) TT-MMP62-TR (c) TT-MMP63-TR (d) (a) (b) (c) (d) MM POWER Turn Only Scissor Stay Faceplate (a) 600mm (b) 800mm (c) 1050mm (d) 1300mm [Double Slave Window Sash] Coastal Part TT-MMP64-TR MM POWER Turn Only Scissor Stay Arm 13V Right Hand [Double Slave Window Sash] Page 49

50 Coastal Part TT-MMP65-TR MM POWER Turn Only Scissor Stay Arm 13V Left Hand [Double Slave Window Sash] Coastal Part TT-MMP67-TR (a) TT-MMP68-TR (b) TT-MMP69-TR (c) TT-MMP70-TR (d) TT-MMP71-TR (e) TT-MMP72-TR (f) TT-MMP73-TR (g) TT-MMP74-TR (h) TT-MMP75-TR (i) (a) (b) (c) (d) (e) (f) (g) (h) (i) French Casement Drive Gears for Eurogroove FHH (a) 660mm (431/660) (b) 840mm (661/840) (c) 1090mm (841/1090) (d) 1340mm (1091/1340) (e) 1590mm (1341/1590) (f) 1700mm (1591/1700) (g) 1950mm (1701/1950) (h) 2200mm (1951/2200) (i) 2450mm (2201/2450) [Double Slave Window Sash] Page 50

51 Coastal Part TT-MMP77-TR Tilt Only Block [Single Window Only] Page 51

52 Scan for more Info Coastal Specialist Ironmongery Ltd Bojea Industrial Estate Trethowel St Austell Cornwall, PL25 5RJ e sales@coastal-group.com w DRA-TTMMP-INST.pdf (A)