SAWGRASS TECHNOLOGY PARK UNIFORM SIGNAGE PLAN

Transcription

1 SAWGRASS TECHNOLOGY PARK UNIFORM SIGNAGE PLAN JULY 201 Fifteen GAP Sawgrass LLC Baron Sign Manufacturing

2 SAWGRASS TECHNOLOGY PARK UNIFORM SIGNAGE PLAN July MONUMENT SIGNAGE Description: Double-sided cabinet sign, functioning as primary entry signage for the property. Locations: See Signage Site Plan for 1. Street Frontage on Sunrise Boulevard and on NW 16 th Avenue Specifications: Each side may be a maximum of 60 SF 2 DIRECTORY SIGNAGE Description: Double-sided cabinet sign, functioning as directory sign with building names and respective tenants. Sign must have ability to update individual tenant names as needed. Locations: See Signage Site Plan for 2. Specifications: Each side may be a maximum of 20 SF DIRECTIONAL SIGNAGE Description: Double-sided directional post and panel sign, functioning as a directional sign with building names, tenant names, directions or arrows, with any combination permitted. Locations: See Signage Site Plan for. Specifications: Each side may be a maximum of SF set on a post with a maximum combine height (post and panel) of 5. BUILDING/TOWER SIGNAGE Description: For purposes of this section, the following definitions shall apply: Tower sign shall mean a sign which is affixed to and flat against one side of the Tower as specified in illustration No., indicating tenant business or [Sawgrass Technology Park] identification located on any of the three sides of the Tower. Maximum Number: The maximum number of signs shall be distributed in the following combinations, provided that the total signage shall not exceed the maximum area listed below. Tower Signs, or 2 Tower Signs/1 Building Sign, or 2 Building Signs. Notwithstanding the above maximum signage, additional tenant identification signage on the building may be allowed if a tenant has a separate entryway which would warrant identification signage located near the entryway, subject to approval of the City Director of Planning and Development. Area Maximum: 1 square foot per lineal foot of building frontage. Building frontage shall mean the side of the building facing the Ring Road. In the event a building fronts the Ring Road on two sides, the longer side shall be utilized to arrive at maximum area.

3 Location Hierarchy: Building/Tower signage shall be located in the following preferred hierarchy: 1) on the Tower, 2) on the Building Band as specified in illustration No., or ) in another location on the building with the approval of the City Director of Planning and Development. (Extracted from Highwoods Sawgrass Uniform Signage Plan, September 2, 1998 (Revised /6/99)) BUILDING ENTRY SIGNAGE Locations: On wall or free standing near entry door of each building Description: single or double-sided sign, functioning as a list of tenants in building. Specifications: Max area of 6 SF (2 SF per side if double-sided) APPLICABLE TO ALL SITE SIGNAGE AT SAWGRASS TECHNOLOGY PARK: Construction: channel letters mounted with spacers; direct surface mount, or push through copy (if an LED illuminated sign) - Individual letter size max 12 tall on Directional Signage - Individual letter size max 2 tall on Building/Tower Signage State or Nationally Trademarked recognized Company names written in a particular font will be allowed within the max font size as defined per sign type. The color of the lettering will still need to be uniform with the signage plan per sign type.

4 A B C D E F G H J M N W SUNRISE BOULEVARD NW 16 TH AVENUE NW 16 TH AVENUE W SUNRISE BOULEVARD P SIGNAGE SITE PLAN SAWGRASS TECHNOLOGY PARK SUNRISE BOULEVARD & 16 TH AVENUE SUNRISE, FLORIDA 2 1 MONUMENT SIGN DIRECTORY SIGN DIRECTIONAL SIGN BUILDING SIGNAGE 2 or

5 1 MONUMENT SIGNAGE Description: Double-sided cabinet sign, functioning as primary entry signage for the property. Locations: See Signage Site Plan for 1. Street Frontage on Sunrise Boulevard and on NW 16 th Avenue Specifications: Each side may be a maximum of 60 SF Construction: channel letters mounted with spacers; direct surface mount, or push through copy (if an LED illuminated sign) - Individual letter size max 12 tall on Directional Signage - Individual letter size max 2 tall on Building/Tower Signage State or Nationally Trademarked recognized Company names written in a particular font will be allowed within the max font size as defined per sign type. The color of the lettering will still need to be uniform with the signage plan per sign type.

6 2 DIRECTORY SIGNAGE Description: Double-sided cabinet sign, functioning as directory sign with building names and respective tenants. Sign must have ability to update individual tenant names as needed. Locations: See Signage Site Plan for 2. Specifications: Each side may be a maximum of 1 SF Construction: channel letters mounted with spacers; direct surface mount, or push through copy (if an LED illuminated sign) - Individual letter size max 12 tall on Directional Signage - Individual letter size max 2 tall on Building/Tower Signage State or Nationally Trademarked recognized Company names written in a particular font will be allowed within the max font size as defined per sign type. The color of the lettering will still need to be uniform with the signage plan per sign type.

7 DIRECTIONAL SIGNAGE Description: Double-sided directional post and panel sign, functioning as a directional sign with building names, tenant names, directions or arrows, with any combination permitted. Locations: See Signage Site Plan for. Specifications: Each side may be a maximum of SF set on a post with a maximum combine height (post and panel) of 5. Construction: channel letters mounted with spacers; direct surface mount, or push through copy (if an LED illuminated sign) - Individual letter size max 12 tall on Directional Signage - Individual letter size max 2 tall on Building/Tower Signage State or Nationally Trademarked recognized Company names written in a particular font will be allowed within the max font size as defined per sign type. The color of the lettering will still need to be uniform with the signage plan per sign type.

8 BUILDING/TOWER SIGNAGE Description: 1 square foot per lineal foot of building frontage. Building frontage shall mean the side of the building facing the Ring Road. In the event a building fronts the Ring Road on two sides, the longer side shall be utilized to arrive at maximum area. The sign may be in a single location (2 sides of tower will count as one location) in two separate locations on the building representing two tenants. Max 2 per building (total of the two signs will be max of 100% of the allowable area), two sides of tower will count as one sign and can be any percentage of max allowed. Building/Tower signage shall be located in the following preferred hierarchy: 1) on the Tower, 2) on the Building Band as specified in illustration No., or ) in another location on the building with the approval of the City Director of Planning and Development. BUILDING ENTRY SIGNAGE / Locations: On wall or free standing near entry door of each building / Description: single or double-sided sign, functioning as a list of tenants in building. / Specifications: Max area of 6 SF (2 SF per side if double-sided) Construction: channel letters mounted with spacers; direct surface mount, or push through copy (if an LED illuminated sign) - Individual letter size max 12 tall on Directional Signage - Individual letter size max 2 tall on Building/Tower Signage State or Nationally Trademarked recognized Company names written in a particular font will be allowed within the max font size as defined per sign type. The color of the lettering will still need to be uniform with the signage plan per sign type.