TE CONNECTIVITY CORPORATION PRODUCT CHANGE NOTIFICATION PCN DATE: 01-MAY-2012 PRODUCT CHANGE NOTIFICATION NO: P IMPACT:

PRODUCT CHANGE NOTIFICATION NO: E PCN DATE: 12-FEB-14

CURRENT DATE: 24-FEBRUARY-2014 NO: E-14-002006 We would like to inform you about the following change(s) to the listed TE Connectivity Product. In case of any further questions about this change(s), please

HRF-SW1000 SPDT Absorptive RF Switch DC To 4GHz Operation

SPDT Absorptive RF Switch DC To 4GHz Operation The Honeywell HRF-SW1000 is a high performance single pole double throw (SPDT) absorptive RF switch ideal for use in wireless base station and handset applications

HRF-SW1030 SP6T Absorptive RF Switch DC to 2.5GHz Operation

HRF-SW3 SP6T Absorptive RF Switch DC to 2.5GHz Operation The Honeywell HRF-SW3 is a high performance single pole six throw (SP6T) absorptive RF switch ideal for use in wireless basestation and handset

HRF-AT db, DC - 4GHz, 6 Bit Parallel Digital Attenuator

HRF-AT46 3.5, DC - 4GHz, 6 Bit Parallel Digital Attenuator The Honeywell HRF-AT46 is a 6-bit digital attenuator ideal for use in broadband communication system applications that require accuracy, speed

DETAIL SPECIFICATION SHEET

INCH-POUNDS MIL-DTL-28754/34E 14 May 2015 SUPERSEDING MIL-C-28754/34D 23 March 1994 DETAIL SPECIFICATION SHEET CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE III, FEMALE CONTACT AND INSTULATOR BUSHING

Application Specification Releasable Poke-in Connector 08JUL 2015 REV:A

Application Specification 114-137055 Releasable Poke-in Connector 08JUL 2015 REV:A 1. INTRODUCTION This specification covers the requirements for application of Releasable Poke-in connector for use on

System Oper. Used on Part No. Product. Environmental Solder Flux Insulation Temperature Cables Rated. Selection Series

SolderSleeve Shield Terminators Product Facts Transparent insulation sleeve provides encapsulation, inspectability, strain relief, and insulation Prefluxed solder preform provides a controlled soldering

Probe. Placement P Primer P. Copyright 2011, Circuit Check, Inc.

Probe Placement P Primer P What's Involved? Control Design ICT Friendly UUT Location Location Location Increase your odds in the manufacturing process Good contact Small targets Agilent Bead Probes Suggested

TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

TNC Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4447 Configuration TNC Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency

AMPLIMITE Cable Connectors and Shielding Hardware Kits

AMPLIMITE Cable Connectors and Shielding Hardware Kits Quick Reference Guide We offer one of the broadest, most versatile portfolios of D-subminiature connectors in the market with unrivaled engineering

SMA TERMINATIONS R-N 1 WATT MATERIAL SPECIFICATIONS

1 WATT Nickel Plated Stainless Steel (Gold Plated available upon request) Nut: Passivated Stainless Steel Pin: Gold Plated Brass 1 Watt 0.375 [9.53] MAX R-N 0.312 [7.92] REF PART NUMBER FREQUENCY RANGE

ENVIRONMENTAL. Operating Temperature: -40ºC to +125ºC. Wire Gauge Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,

Back Mark Date Code Prefix Z5 before datecode Other

624 Silver Creek Valley Road San Jose, CA 96138 PRODUCT/PROCESS CHANGE NOTICE (PCN) PCN #: W151-1 DATE: March 14, 216 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: 28G-5LF(T), 28G-57LF(T),

Amphenol RF. Mini-BNC Mini-BNC Connectors. Mini-BNC. Description. Features/Benefits. Applications

Amphenol RF 100 Connectors Description Amphenol RF introduces the new generation of quality BNC connectors for the telecommunication and broadband applications for higher connector densities while preserving

HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

HN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4474 Configuration HN Male Connector MIL-STD-348A 50 Ohms Features Max Operating Frequency 3

Application Specification Slim WtoB Poke-in Connector

Application Specification 114-137049 Slim WtoB Poke-in Connector 18APR 2016 REV:B 1. INTRODUCTION This specification covers the requirements for application of Slim WtoB Poke in connector for use on lighting

Poke-Home: Inverted Thru Board AWG: WTB INTER CONNECT FEATURES AND BENEFITS APPLICATIONS ELECTRICAL MECHANICAL ENVIRONMENTAL

AVX continues to develop innovative connectors for the industrial electronics market that provide significant benefits over existing, outdated connector solutions. Listening to the design engineering community,

Ultra Low Jitter LVPECL or LVDS Clock

Features Ceramic Surface Mount Package Ultra Low Phase Jitter Performance, 100fs Typical Fundamental or 3 rd Overtone Crystal Design Frequency Range 80 170MHz * +2.5V or +3.3V Operation Output Enable Standard

Series 300. Miniature Rocker & Paddle Switches

SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both silver and

PRODUCT/PROCESS CHANGE NOTICE (PCN)

PCN #: A1007-07 DATE: August 25, 2010 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: 82V2048 and 82V2058 Product Mark (built in 20 mm x 20 mm TQFP-144) Back Mark Date Code Date Effective: Contact:

Application Specification Ultraminiature Bare Poke-in Contact 26FEB2019 REV:A2

Application Specification 114-137190 Ultraminiature Bare Poke-in Contact 26FEB2019 REV:A2 1. INTRODUCTION This specification covers the requirements for application of ultraminiature bare poke-in contacts

Stac64 Unsealed Connector System

Unsealed Connector System 2.54mm (.100") Pitch 34729 Female 22.70 x 22.23 Features and Benefits Pre-assembled TPA to receptacle housing shipped as single assembly provide applied labor and cost savings

Memory card connectors

Memory card connectors (PCMCIA CONFORMABLE) surface mount 560H SERIES - LIGHTWEIGHT Features The connectors conform to the Japan Electronic Industry Development Association (JEIDA) and Personal Computer

INTRODUCTION: The following paper is intended to inform on the subject at hand and is based on years of laboratory observations.

INTRODUCTION: The following paper is intended to inform on the subject at hand and is based on years of laboratory observations. Fretting motion, fretting wear, fretting corrosion what does it all mean

Coaxial Fixed Attenuator

Coaxial Fixed Attenuator RF Fixed attenuator RF Fixed attenuator is a device used to reduce power levels of a signal by a fixed amount with little or no reflections. Applications Extending the dynamic

Page 1 of 6 FSL Logo PRODUCT AND PROCESS CHANGE NOTIFICATION UPDATE Generic Copy ISSUE DATE: 06-Sep-2013 NOTIFICATION: 15407A TITLE: S912XET TSMC11 FAB QUAL AND CU WIRE QUAL FOR TSMC3/11 PARTS IN FSL-KLM-FM

RF Connectors Technical Data Sheet. Gold over Nickel Plated Beryllium Copper Contact. Size in [11.81 mm] . Weight lbs [3.18 g].

RP SMA Male Connector Solder Attachment for PE-SR402AL, PE-SR402FL, PE-SR402FLJ, PE- SR402TN, RG402, Gold Plated Brass Body RF Connectors Technical Data Sheet PE44724 Configuration SMA Male Reverse Polarity

Corel e plates white

Corelle plates white Corelle Winter Frost Plates White Dinner 10-1/4" Dia. (Pack. I have attached a picture a seven Corelle plates stacked on top of seven of the other plates we have. PLATES. Refine Your

7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195

7/16 DIN Male Connector Clamp/Solder Attachment for RG213, RG55, RG141, RG142, RG223, RG400, RG303, PE-C195, PE-P195, LMR-195 RF Connectors Technical Data Sheet PE4567 Configuration 7/16 DIN Male Connector

Model 653 Very Low Jitter LVPECL or LVDS Clock

Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 320MHz * +2.5V or +3.3V Operation Output Enable Standard

PRODUCT/PROCESS CHANGE NOTICE (PCN)

PCN #: A1205-01 Date: June 11, 2012 MEANS OF DISTINGUISHING CHANGED DEVICES: Product Affected: SSOP-28 Product Mark Lot # will have "MM" or "MS" prefix for Carsem (Green) Back Mark Malaysia and suffix

FREE* FINISHINGS (without Nickel) Performed static and in barrel Page 1 of 10

FREE* FINISHINGS (without Nickel) Performed static and in barrel Page 1 of 10 STATIC FINISHINGS LIGHT GOLD FREE DIRECT THICK GOLD GOLD FREE THICK GOLD FREE DIRECT LIGHT GOLD DIRECT GOLD ETRUSCAN RUIN DIRECT

Model 633 Very Low Jitter LVPECL or LVDS Clock

Features Ceramic Surface Mount Package Very Low Phase Jitter Performance, 500fs Maximum Fundamental or 3 rd Overtone Crystal Design Frequency Range 10 220MHz * +2.5V or +3.3V Operation Output Enable Standard

Price List - Precious Metals

Price List - Precious Metals Metallic Samples. Gold by cupellation 11.70 Gold and Silver by cupellation 22.30 Silver by titration 11.20 Instrumental Analysis. Gold 11.70 Platinum 17.40 Rhodium 27.90 Silver

Model 356P/L Advanced PLL LVPECL or LVDS VCXO

Features Ceramic Surface Mount Package Low Phase Jitter Performance, 500fs Typical Advanced PLL Design w/ Low Fundamental Crystal Frequency Range 10MHz 800MHz * +2.5V or +3.3V Operation Output Enable Standard

EP METAL TYPE - SOLDER ISO ASSEMBLY OF EP MALE ISO ASSEMBLY OF EP FEMALE

EP METAL TYPE - SOLDER The EP Series has set the standard in high performance speaker connectors. Apart from its durability and strength, it offers consistent superior power handling capabilities. Features:

PRODUCT SPECIFICATION

0.8x1.2 mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 0.8x1.2mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug

PRODUCT SPECIFICATION

2.54mm Board to Board Header Connectors Page 1 1.0 SCOPE This specifies Pitch 2.54mm Headers Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

Product Change Notification - KSRA-08NNFY461

Product Change Notification - KSRA-08NNFY461-18 Aug 2017 - CCB 2800 Initial Not... http://www.microchip.com/mymicrochip/notificationdetails.aspx?pcn=ksra-08nnfy4... Page 1 of 2 8/25/2017 Product Change

INSULATION DISPLACEMENT IDC. PITCH d : 1.27X1.27mm, b : 2.00X2.00mm, a : 2.54X2.54mm IDCR IDC RIBBON CONNECTOR IDB IDC D-SUB CONNECTOR

INSULATION DISPLACEMENT PITCH d : 1.271.27mm, b : 2.0.00mm, a : 2.542.54mm R RIBBON CONNECTOR IDB D-SUB CONNECTOR CABLE ASSEMBLY TABLE OF CONTENTS PAGE d001 1 b001 2 a01 3 a0 4 a003 5 a1 6 R001 7 IDB100

DETAIL SPECIFICATION SHEET

INCH-POUND MIL-DTL-55302/23H 10 July 2017 SUPERSEDING MIL-DTL-55302/23H 3 December 2003 DETAIL SPECIFICATION SHEET CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PLUG, DECADE INCREMENT 10 THRU

PRODUCT SPECIFICATION

2.54mm Board to Board Socket Connectors Page 1 1.0 SCOPE This specifies 2.54mm pitch Socket Connectors. The connector shall meet the performances, specified here under the condition with the plug connector

ELCO Series 8005/8015 A KYOCERA GROUP COMPANY

Series 8005/8015 A KYOCERA GROUP COMPANY Series 8005 Position Miniature IDC Wire to Board Connector Series 8005 is a super compact pin Wire to Board connector designed for high density mounting. This is

SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55

SMA Male QD Connector Crimp/Solder Attachment For RG142, RG223, RG400, RG55 RF Connectors Technical Data Sheet Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG142, RG223, RG400, RG55

USB 2.0-IP67 Water Resistant Connector System

Section 6 USB 2.0-IP67 Water Resistant Connector System CONEC completed its product line of bayonet locking series, IP67 rated industrial USB 2.0 connector system for harsh environments. The housing can

D-subminiature Metal Shell and All Plastic Solder Cup and IDC T* Series

D-subminiature Metal Shell and All Plastic Solder Cup and IDC FEATURES Offered in 9, 15, 25, and 37 position plugs and sockets. Available in Solder Cup and IDC (insulation displacement) terminations for

Qualification Test Report Mini-Universal MATE-N-LOK* Connector

Qualification Test Report Mini-Universal MATE-N-LOK* Connector 501-589 21 May 12 Rev B 1. INTRODUCTION 1.1. Purpose 1.2. Scope Testing was performed on the Tyco Electronics Mini-Universal MATE-N-LOK* Connectors

GemOro AuRACLE AGT1 GOLD & PLATINUM TESTER EASY OPERATION GUIDE: STEPS 1 & 2

EASY OPERATION GUIDE: STEPS 1 & 2 The AGT1 MUST be used while following the below easy steps and recommendations to get accurate test results. STEP 1: AGT1 POWER UP After the batteries are installed and

Introducing IDC SSL Connector

Introducing IDC SSL Connector The IDC SSL connector series are insulation displacement (IDC) SMT and thru-hole wire-to-board connectors designed for quick, tool-less termination of discrete wires onto

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, inch

SMA Male Connector Crimp/Solder Attachment for RG58, RG303, RG141, PE-C195, PE-P195, LMR-195, 0195 inch RF Connectors Technical Data Sheet PE4215 Configuration SMA Male Connector MIL-STD-348A 50 Ohms Straight

SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, inch

SMB Plug Connector Crimp/Solder Attachment for RG174, RG316, RG188, LMR-100, PE-B100, PE-C100, 0100 inch RF Connectors Technical Data Sheet PE4046 Configuration SMB Plug Connector MIL-STD-348A 50 Ohms

Overview for VEX educational Platform and Competition. (All you need to know to start)

Overview for VEX educational Platform and Competition (All you need to know to start) Contents Topic page Innovation First International.. 3 What is VEX?.. 4 Class room and Competition Kit with extras.

Materials Declaration

Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 178-025-613R571 0.03540 Environment

.093 [2.36] Commercial Pin and Socket Connectors

.09 [.] Commercial Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold

Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.

Specifications Mechanical Mechanical Life Operating Force Environmental Operating Temperature Storage Temperature : 200mΩ max. 20,000 steps : 200gf-cm max. : -25 C to +80 C : -40 C to +85 C Material Base

If you have any questions concerning this change, please contact: NAME: Hank Chou PHONE:

April 17, 2015 PPCN #150003 PROCESS/ PRODUCT CHANGE NOTIFICATION This is to inform you that Micrel has qualified Silver wire bonding process for certain SOIC-8L products at STARS, Thailand. Micrel will

SC6015 DATA SHEET. BNC Female Bulkhead Connector Crimp/Solder Attachment For.100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable

BNC Female Bulkhead Connector Crimp/Solder Attachment For 100 inch, RG316, RG174, RG188, LMR-100, LMR-100A, LMR-100-FR Cable BNC female bulkhead connector with crimp/solder attachment for 100 inch, RG316,

Radio Control Installation and Operating Instructions System 4

Radio Control Installation and Operating Instructions System 4 P.O. Box 403, One Cedar Parkway, Jackson, WI 53037 Phone: 800-628-1909 Fax: 262-677-2058 Revision: April 19, 2012 Contents Introduction 3

Male Cable Connectors / Female Receptacles Male cable connector straight, with internal strain relief clamp and/or clamping ring, cable diameter 6-12,5 mm No. of contacts 3 + PE 3 + PE Termination technique

CLOUDSPLITTER Connector System PRELIMINARY

CLOUDSPLITTER Connector System The CLOUDSPLITTER connector system is a single cable solution for powered devices that delivers Cat5e performance and up to 250 watts of power over a single cable. The 8

Product Change Notification - GBNG-14WQIZ459

Product Change Notification - GBNG-14WQIZ459 Date: 07 Sep 2018 Product Category: 8-bit Microcontrollers; Capacitive Touch Sensors Affected CPNs: Notification subject: CCB 3370.001 Initial Notice: Qualification

Combimate stamped & formed contacts

Designed for compatibility with AMP Type III+ Contact product lines and Multimate Connectors¹: M Series Econoseal Metrimate Series G CPC Circular Plastic Connectors These are developed by in order to comply

CATALOG. AEROSPACE * MEDICAL * AUTOMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949)

CATALOG AEROSPACE * MEDICAL * AUMOTIVE INDUSTRIAL * MICRO-ELECTRONICS (949) 636-9677 www.milspecwest.com MICRO CONNECR REFERENCE MILSPECWEST MICROTECH COMTRONICS DESCRIPTION MSW-G-B-02S-040* DP-2S-1 CMR-O2-B-02S

Specifications subject to change Packaging

VCSEL Standard Product Packaging Options All standard products are represented in the table below. The Part Number for a standard product is determined by replacing the x in the column Generic Part Number

FMSW6124 DATA SHEET. Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.

Transfer Latching Electro-Mechanical Relay Switch From DC to 40 GHz, 5 Watts with Indicators, TTL, Self Cut Off, Diodes, 2.92mm The FMSW6124 is a Transfer Electromechanical Relay Switch that operates over

QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400

QN Male Connector Crimp/Solder Attachment for RG55, RG141, RG142, RG223, RG400 RF Connectors Technical Data Sheet PE44978 Configuration QN Male Connector 50 Ohms Straight Body Geometry Features Max Operating

Variable Attenuators (Step & Continuous)

(Step & Continuous) Wide Choice of Attenuation & Frequency Ranges. High Reliability & Long Life Rugged Construction & Connectors Rotational Stops Included on most models Low Cost Designs - Model 3033 Custom

High Frequency. ECT-CPG com shop ECT-CPG com

High Frequency HiGH FreQuenCY High Frequency or Radio Frequency (RF) coaxial probes are used for testing high speed circuits in a variety of industries including automotive, wireless communications, satellite,

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated

SMA Male Connector Crimp/Solder Attachment for RG174, RG316, RG188 Gold Plated RF Connectors Technical Data Sheet PE45145 Configuration SMA Male Connector 50 Ohms Straight Body Geometry RG174, RG316, RG188

RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402

RP SMA Male Right Angle Connector Solder Attachment for PE-SR402AL, PE-SR402FL, RG402 RF Connectors Technical Data Sheet PE4790 Configuration SMA Male Reverse Polarity Connector MIL-STD-348 50 Ohms Right

2mm Pitch 2 Piece Battery Connector. Horizontal/Vertical

FEATURES Low profile battery connectors (GF21/GF22/GF31 only) with 2.6mm (.12") height. 2 piece type with a highly reliable connection Sequence connection (FMLB : First Mate Last Break, 1 pin only) is

7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393

7/16 DIN Male Connector Crimp/Solder Attachment for RG214, RG9, RG225, RG393 RF Connectors Technical Data Sheet PE4571 Configuration 7/16 DIN Male Connector IEC 169-4 50 Ohms Straight Body Geometry Features

Coaxial Line Stretchers

Coaxial Line Stretchers Frequency range (Note) Maximum Input NOTE: The frequency range will depend on the model. 1.Vibration 2.Shock DC to 10.0 GHz 50 W These coaxial line stretchers maintain an impedance

Pin Contacts Military Part No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated to 1500 cycles of durability.

EXTENDED DUTY CRIMP CONTACTS SIZE #12 COAXIAL CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches

Materials Declaration

Part Name: : Part Weight (kg): 3300 International Airport Drive, Suite 200 Charlotte, NC 28208 (704) 424-5448 www.norcomp.net Materials Declaration Dual Port Connector 179-015-413R491 0.02620 Environment

RWZ CONNECTOR. 1Certified LR Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors

Disconnectable Crimp style Wire-to-wire connectors In unit connection, this RWZ connector is a hybrid type double row drawer connector with combined signal and power supply circuits, absorbs misalignment

Rotary Series. Specifications. Material. Soldering Process. Max Room Temperature 120 ~ 150sec 60sec. 5 ~ 10sec.

MCRH2 MCRV2 MCRS2 Specifications Mechanical Mechanical Life : 200mΩ max. 20,000 steps Operating Force : 200gf-cm max. Environmental Operating Temperature : -25 C to +80 C Storage Temperature : -40 C to

VP Series Relay 1. SUMMARY OF TYPES. C&S Controls Limited 22 Upland Road Bexleyheath KENT. DA7 4NR

&S ontrols Limited Upland Road exleyheath KENT. DA NR Tel: Fax: Email: Web: + (0)0 0 + (0)0 0 sales@candscontrolsltd.com www.candscontrolsltd.com VP Series Relay Miniature radle Relays World-wide compatibility

sealed mini usb connectors

QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:

HYPERGRIP CONNECTOR SERIES

HYPRGRIP CONNCTOR SRIS High Reliability Medical Connectors TCHNICAL CHARACTRISTICS SPCIICATIONS Number of Contacts: HG0: 5, HG2: 12, HG3: 19, HG4: 33 HG6: 80 Termination Style: Crimp Contact Diameter:

Modular Plug Connectors compliant to Cat.6 A Standard

Modular Plug Connectors compliant to Cat.6 A Standard TM3P Series Features. Support High-Speed LAN transmission Improved performance by two row contact arrangement. Conforms to Cat.6 A requirements of

MAIN FEATURES TECHNICAL DATA MATERIALS MECHANICAL ELECTRICAL. Glass filled polyester rated UL94 V-O Copper alloy plated hard acid gold

GENERAL INFORMATION MAIN FEATURES 2,54mm (0,1 ) pitch Fixed or replaceable contacts. Cantilever or bifurcated contacts. Cut to any size from 5 to 85 contacts single or 10 to 170 double sided. Suitable

TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, inch, PE-B100, PE-C100, LMR-100

TNC Male Right Angle Connector Crimp/ Solder Attachment for RG174, RG316, RG188, 0100 inch, PE-B100, PE-C100, LMR-100 RF Connectors Technical Data Sheet PE4455 Configuration TNC Male Connector 50 Ohms

Contacts M39029 and Glenair signature solutions MIL-DTL Series III type

EXTENDED DUTY CRIMP CONTACTS Mating End Size Wire Accomodation How-To-Order Extended Duty Crimp No. Glenair Part No. No. Copper alloy, plated with 5 μinches gold over 45 μinches palladium alloy. Rated

JFA CONNECTOR J1000 SERIES

JFA CONNECTOR J1000 SERIES 2.2mm pitcth/disconnectable Crimp style connectors(wire-to-board/wire-to-wire) Specifications Current rating: Circuits 22 2 0 #1.4 5.5 5.5 4.7 4.0.9.. # 5.4 4. 4..9.4..0.0 Wire

Interesting Customer Questions

Interesting Customer Questions Topics of Customer Questions Gold plating vs Gold Flash Gull Wing Toe Fillet requirements Class 3 rework Tempered leads, what are they? 2 Gold Plating vs Gold Flash Question:

D-subminiature Metal Shell Crimp and Poke, Right-Angle and Vertical PCB D*U Series

Crimp and Poke, Right-Angle and Vertical PCB Offered in 9, 15, 25, 37, and 50 position plugs and sockets (except right-angle PCB connectors- 9, 15, and 25 positions). FEATURES Available with gold flash

Bolt Together Pump/Screw Together Frame Conversion Kit

Instruction Sheet P/N Bolt Together Pump/Screw Together Frame Conversion Kit 1. Description The bolt together pump/screw together frame conversion kit changes your Rhino unloader from a 3-post screw together

9K-14KYellow Gold Casting Alloys

9K-14KYellow Gold Casting Alloys 200 Bright Yellow 9-14K Casting Low silver, high, for open systems 230 Standard Yellow 9-14K Casting Low zinc, high 278 Greenish Yellow 9-14K Casting High fluidity & tarnish

Connector MACHINE PIN SOCKET EMS SERIES FEATURES SPECIFICATIONS KINDS OF BASE

MACHINE PIN SOCKET EMS SERIES Connector FEATURES Funnel shaped four-fingered and six-fingered contacts provide easy IC insertion and withdrawal, high reliability Gold plated contact to ensure low contact

CABLE ASSEMBLIES. Unit 21 Stort Mill, Riverway, Harlow, Essex CM20 2SN. Sales Office. TEL FAX

CABLE ASSEMBLIES Unit 21 Stort Mill, Riverway, Harlow, Essex CM20 2SN Sales Office. TEL +441279 639251 FAX +441279 641118 EMAIL: sales@ccsukltd.co.uk Web:www.ccsukltd.co.uk Sales Contacts: - James Elwood

Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment

Ceiling Systems SERPENTINA Classic Exposed Tee System (24" x 24", 24" x 48", and 24" x 72") Floating Clouds and Perimeter Wall Attachment Installation Instructions The 3-Dimensional Ceiling System consists

E-BOOK / NINTENDO 3DS SCREEN REPAIR ARCHIVE

03 March, 2018 E-BOOK / NINTENDO 3DS SCREEN REPAIR ARCHIVE Document Filetype: PDF 298.01 KB 0 E-BOOK / NINTENDO 3DS SCREEN REPAIR ARCHIVE Top Upper LCD Display Screen for Nintendo 3DS XL Repair 3DSXL.

Distributed by: www.jameco.com 1-8-831-4242 The content and copyrights of the attached material are the property of its owner. Lead-free A23C2V7 - A23C51 3mW DUAL SURFACE MOUNT ENER DIODE Features Dual

ENVIRONMENTAL. Operating Temperature: -40ºC to +130ºC. Wire Size. Code Accepted Max Wire Gauge Insulation AWG Solid or Stranded

Wire-to-Wire (WTW) connectors have been used in the industrial market for years with traditional 2-Piece (plug & socket) connector systems. These require crimp and poke wire terminations to connect discrete

Ceramic Resonator (CERALOCK )

Ceramic Resonator (CERALOCK ) Chip Type Pd free products Introduction Jan. 2018 Timing Device Division Planning & Sales Promotion Department 1 murata.com 1 Contents Concept Intended Series Specification

Coils, Wire Forms, PRECISION SPRINGS, COILS & WIRE FORMS

Coils, Wire Forms, Spring Components and Laser Welded Assemblies PRECISION SPRINGS, COILS & WIRE FORMS We manufacture custom wire components for the Medical, Electronics, Aerospace and Military markets.

THE COMPLETE CABINET

THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

THE COMPLETE CABINET

THE COMPLETE CABINET ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE ALUMINUM FRAME CABINET DOORS FOR HOME AND OFFICE WELCOME TO ONE-STOP SHOPPING. THE ONLY ALUMINUM DOOR PROGRAM YOU LL NEED. This is

Interconnect and Termination Devices

Shield Termination SolderSleeve SolderSleeve shield grounding terminators provide an environmentally sealed, insulated & encapsulated solder connection for a variety of applications. Reliable, versatile