THREAD TURNING INSERTS
|
|
- Judith Eaton
- 5 years ago
- Views:
Transcription
1 3 M ETERNA INTERNA ETERNA INTERNA METR 3, 3,,0,,0,,,0,0 3/ 3/ 3/ 3/ 3/ / / / 1, 1, 1, 1, 1, 1, 1, 1, 3,7,0, 1, 1, 1, 2, 1, 3,7,0, ER_0.ISO_FC ER_0.7ISO_FC ER_0.7ISO_FC ER_0.ISO_FC ER_1.0ISO_FC ER_1.2ISO_FC ER_1.ISO_FC ER_1.7ISO_FC ER_2.0ISO_FC ER_2.ISO_FC ER_3.0ISO_FC ER_3.ISO_FC ER_3.ISO_FC ER_.0ISO_FC ER_.ISO_FC ER_.0ISO_FC ER_.ISO_FC ER_.ISO_FC ER_.0ISO_FC ER_.0ISO_FC ER_1.0ISOCB_FC ER_1.2ISOCB_FC ER_1.ISOCB_FC ER_1.7ISOCB_FC ER_2.0ISOCB_FC ER_2.ISOCB_FC ER_3.0ISOCB_FC ER_1.0ISO3M_FC ER_1.ISO2M_FC ER_1.ISO3M_FC ER_2.0ISO2M_FC ER_2.0ISO3M_FC ER_3.0ISO2M_FC WITH SINTERED CHIPBREAKER 0IR_0.ISO_BC 0IR_0.7ISO_BC 0IR_0.7ISO_BC 0IR_1.0ISO_BC 0IR_1.0ISO_BC IR_1.0ISO_FC IR_1.0ISO_FC 0IR_1.2ISO_BC 0IR_1.2ISO_BC IR_1.2ISO_FC IR_1.2ISO_FC 0IR_1.ISO_BC IR_1.ISO_FC IR_1.ISO_FC 0IR_1.7ISO_BC IR_2.0ISO_FC IR_2.0ISO_FC IR_2.ISO_FC IR_3.0ISO_FC IR_3.ISO_FC IR_3.ISO_FC IR_.0ISO_FC IR_.ISO_FC IR_.0ISO_FC IR_.ISO_FC IR_.ISO_FC IR_.0ISO_FC IR_.0ISO_FC IR_1.0ISOCB_FC IR_1.ISOCB_FC IR_2.0ISOCB_FC IR_2.ISOCB_FC IR_3.0ISOCB_FC IR_1.0ISO3M_FC IR_1.ISO2M_FC IR_1.ISO3M_FC IR_2.0ISO2M_FC IR_2.0ISO3M_FC IR_3.0ISO2M_FC MUTITOOTH
2 UN , 3/ 3/ 3/ 3/ 3/ 3/ / / / ETERNA ER_UN_FC ER_2UN_FC ER_2UN_FC ER_UN_FC ER_1UN_FC ER_UN_FC ER_UN_FC ER_13UN_FC ER_UN_FC ER_UN_FC ER_UN_FC ER_9UN_FC ER_UN_FC ER_7UN_FC ER_UN_FC ER_UN_FC ER_.UN_FC ER_UN_FC ER_UN2M_FC ER_UN3M_FC ER_UN2M_FC ER_UN3M_FC ER_UN2M_FC 1, 1, UNIFIED 1, INTERNA 0IR_UN_BC 0IR_UN_BC IR_UN_FC IR_UN_FC 0IR_2UN_BC 0IR_2UN_BC IR_2UN_FC IR_2UN_FC 0IR_2UN_BC 0IR_2UN_BC IR_2UN_FC 0IR_UN_BC 0IR_UN_BC IR_UN_FC IR_UN_FC 0IR_1UN_BC IR_1UN_FC 0IR_UN_BC IR_UN_FC IR_UN_FC 0IR_UN_BC IR_UN_FC IR_UN_FC IR_UN_FC IR_UN_FC IR_UN_FC IR_9UN_FC IR_UN_FC IR_7UN_FC IR_UN_FC IR_UN_FC IR_.UN_FC IR_UN_FC MUTITOOTH IR_UN2M_FC,0 IR_UN3M_FC 3, IR_UN2M_FC,3 IR_UN3M_FC,9 IR_UN2M_FC The s are for Right Hand Inserts. For eft Hand specify instead of R. The Price is % higher for. The Price is 1% Higher for Thicker Thread Turning Inserts. Ex TER... All Inserts have ground profile and chipbreaker if nothing else is indicated. 1, 1, 1, 1,,0 3,,3,9 37
3 3 WHITWORTH PIPE THREAD G BSPT PIPE THREAD BSPT ER_BSPT_FC ER_BSPT_FC IR_BSPT_FC IR_BSPT_FC ETERNA INTERNA NPT PIPE THREAD NPT ETERNA INTERNA NPTF DRSEA PIPE THREAD NPTF / 3/ ER_NPTF_FC ER_1NPTF_FC ER_NPTF_FC ER_.NPTF_FC ER_NPTF_FC 1, 0IR_NPTF_BC 0IR_NPTF_BC 0IR_1NPTF_BC IR_1NPTF_FC IR_NPTF_FC IR_.NPTF_FC IR_NPTF_FC 1, ETERNA INTERNA ETERNA INTERNA / 3/ / / ER_NPT_FC ER_1NPT_FC ER_NPT_FC ER_.NPT_FC ER_NPT_FC ER_.NPT2M_FC ER_.NPT3M_FC ER_NPT2M_FC 1, 3,,,0 0IR_NPT_BC 0IR_NPT_BC 0IR_1NPT_BC IR_1NPT_FC IR_NPT_FC IR_.NPT_FC IR_NPT_FC IR_.NPT2M_FC IR_.NPT3M_FC IR_NPT2M_FC 1, 3,,, / 3/ 2,, 3, 0IR_2W_BC 0IR_19W_BC IR_19W_FC IR_W_FC IR_W_FC IR_WCB_FC IR_WCB_FC IR_W2M_FC IR_W3M_FC IR_W2M_FC 2,, 3, WITH SINTERED CHIPBREAKER MUTITOOTH MUTITOOTH ER_2W_FC ER_19W_FC ER_W_FC ER_W_FC ER_19WCB_FC ER_WCB_FC ER_WCB_FC ER_W2M_FC ER_W3M_FC ER_W2M_FC A wider program of whitworth profiles are available.
4 ,-,0,-, ,-,0,-,0 ABUT SG,0 PG , ,- 3/ 3/ / 3/ / ETERNA ER_ABUT_FC ER_ABUT_FC ER_ABUT_FC ER_ABUT_FC ER_ABUT_FC ER_ABUT_FC PARTIA PROFIE 0 ETERNA ER_A0_FC ER_G0_FC ER_AG0_FC ER_N0_FC ER_Q0_FC INTERNA 0IR_A0_BC 0IR_A0_BC IR_A0_FC IR_A0_FC IR_G0_FC IR_AG0_FC IR_N0_FC IR_Q0_FC PARTIA PROFIE ETERNA ER_A_FC ER_G_FC ER_AG_FC ER_N_FC ER_Q_FC INTERNA 0IR_A_BC 0IR_A_BC IR_A_FC IR_A_FC IR_G_FC IR_AG_FC IR_N_FC IR_Q_FC AMERAN BUTTRESS 3, INTERNA IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC IR_ABUT_FC BUTTRESS (SÄGENGEWINDE) DIN 13 ETERNA ER_2.0SG_FC ER_3.0SG_FC ER_.0SG_FC STEE CONDUIT THREAD DIN 030 ETERNA ER_PG_FC ER_1PG_FC ER_PG_FC 1, INTERNA IR_2.0SG_FC IR_3.0SG_FC IR_.0SG_FC INTERNA 0IR_PG_BC IR_1PG_FC IR_1PG_FC IR_PG_FC 3, 3, The s are for Right Hand Inserts. For eft Hand specify instead of R. The Price is % higher for. 39
5 TR,0,0,0,0 7,0 RD ACME / / / / STACME 3 / / ETERNA ER_1.TR_FC ER_2.0TR_FC ER_3.0TR_FC ER_.0TR_FC ER_.0TR_FC ER_.0TR_FC ER_.0TR_FC ER_7.0TR_FC ETERNA ER_RD_FC ER_RD_FC ER_RD_FC ER_RD_FC ER_RD_FC ER_RD_FC ETERNA ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ER_ACME_FC ETERNA ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_STACME_FC ER_3STACME_FC TRAPEZ DIN 3 1, 2, INTERNA IR_2.0TR_FC IR_3.0TR_FC IR_.0TR_FC IR_.0TR_FC IR_.0TR_FC IR_.0TR_FC IR_7.0TR_FC ROUND DIN 0 1, ACME 1, STUB ACME 1, 2, 1, INTERNA IR_RD_FC IR_RD_FC IR_RD_FC IR_RD_FC IR_RD_FC IR_RD_FC INTERNA IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC IR_ACME_FC INTERNA IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_STACME_FC IR_3STACME_FC 1, 1, 1, 2, 2, 1, 1, The s are for Right Hand Inserts. For eft Hand specify instead of R. The Price is % higher for. 0
6 API RD V-0.00 API ROUND OI THREAD ETERNA ER_APIRD_FC ER_APIRD_FC ETERNA INTERNA IR_APIRD_FC IR_APIRD_FC MUTITOOTH V-0.00 OI THREAD INTERNA 3 ER_API03_FC IR_API03_FC 1, V-0.03R V-0.00 E BUT / / / / / / ER_APIRD2M_FC ER_APIRD3M_FC ER_APIRD2M_FC ETERNA ER_API_FC ER_API33_FC ETERNA ER_API02_FC ER_API03_FC V-0.03R OI THREAD INTERNA IR_API_FC IR_API33_FC V-0.00 OI THREAD INTERNA IR_API02_FC IR_API03_FC 2, 2, ETREME - INE CASING OI THREAD ETERNA ER_E1._FC ER_E1.2_FC INTERNA IR_E1._FC IR_E1.2_FC BUTTRESS CASING OI THREAD ETERNA ER_BUT0.7_FC ER_BUT1.0_FC IR_APIRD2M_FC IR_APIRD3M_FC IR_APIRD2M_FC INTERNA IR_BUT0.7_FC IR_BUT1.0_FC 3, 1, 3,7,2, 2 3 / - 1 /2 REG NC23-NC0 NC-NC77 / REG 1 /2, 7 /, / REG - 7 / / - 3 / 1 / / - 1
7 2 ETERNA INTERNA UNJ UNIFIED ER_UNJ_FC ER_2UNJ_FC ER_2UNJ_FC ER_UNJ_FC ER_1UNJ_FC ER_UNJ_FC ER_UNJ_FC ER_13UNJ_FC ER_UNJ_FC ER_UNJ_FC ER_UNJ_FC ER_9UNJ_FC ER_UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_2UNJ_FC IR_2UNJ_FC IR_2UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_1UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_UNJ_FC IR_9UNJ_FC IR_UNJ_FC , MJ ETERNA INTERNA METR ER_1.0MJ_FC ER_1.2MJ_FC ER_1.MJ_FC ER_2.0MJ_FC IR_1.0MJ_FC IR_1.0MJ_FC IR_1.2MJ_FC IR_1.2MJ_FC IR_1.MJ_FC IR_1.MJ_FC IR_2.0MJ_FC IR_2.0MJ_FC
8 Kit with Different Inserts External Thread Turning Inserts ER_FC ER_FC 1 st. ER_0.7ISO_FC 1 st. ER_1.0ISO_FC 1 st. ER_1.2ISO_FC 1 st. ER_1.ISO_FC 1 st. ER_1.7ISO_FC M, M-7 M-9 M- M MF- MF-30 MF- MF-0 1 st. ER_2.0ISO_FC 1 st. ER_2.ISO_FC 1 st. ER_3.0ISO_FC 1 st. ER_AG_FC 1 st. ER_AG0_FC M- M1- M2- P- P- MF1-0 MF st. ER_3.ISO_FC 2 st. ER_.0ISO_FC 2 st. ER_.ISO_FC 2 st. ER_.0ISO_FC 2 st. ER_N0_FC M30-33 M3-39 M2- M-2 P3,-,0 MF2-0 Internal Thread Turning Inserts 0IR_Ø_BC 2 st. 0IR_0.ISO_BC 2 st. 0IR_0.7ISO_BC 2 st. 0IR_1.0ISO_BC 2 st. 0IR_1.2ISO_BC 2 st. 0IR_A0_BC MF MF7- M7 MF-30 M-9 MF- P- Recoended holder: SIR_000_H0 0IR_Ø7_BC 2 st. 0IR_1.0ISO_BC 2 st. 0IR_1.ISO_BC M- 2 st. 0IR_1.7ISO_BC M 2 st. 0IR_2W_BC G1/ 2 st. 0IR_A0_BC P- MF-30 MF-0 Recoended holder: SIR_0007_K0 IR_Ø_FC 2 st. IR_1.0ISO_FC 2 st. IR_1.ISO_FC 2 st. IR_2.0ISO_FC 2 st. IR_19W_FC 2 st. IR_A0_FC M- G- P- MF-30 MF-0 MF1-0 Recoended holder: SIR_00_K IR_Ø13_FC 2 st. IR_1.ISO_FC 2 st. IR_2.0ISO_FC 2 st. IR_2.ISO_FC 2 st. IR_3.0ISO_FC 2 st. IR_W_FC MF1-0 MF1-0 M1- M2- MF30-0 G-7/ Recoended holder: SIR_0013_M IR_Ø_FC 2 st. IR_1.ISO_FC 2 st. IR_2.0ISO_FC 2 st. IR_3.0ISO_FC 2 st. IR_W_FC 2 st. IR_AG0_FC MF-0 MF-0 M MF30-0 G1- P- Recoended holder: SIR_00_P IR_Ø2_FC 2 st. IR_3.ISO_FC 2 st. IR_.0ISO_FC 2 st. IR_.ISO_FC 2 st. IR_.0ISO_FC 2 st. IR_N0_FC M30-33 M3-39 MF2-0 M2- M-2 P3,-,0 Recoended holder: SIR_002_R 3
THREAD TURNING CONTENTS
THREAD TURNING CONTENTS Technical Information N FourCut Thread Turning Inserts 0 External Toolholders Triangular Thread Turning Inserts External Toolholders Internal Toolholders U-type Thread Turning Inserts
More informationPitch Perfect Threading. Pitch Perfect Threading
Pitch Perfect Threading 1 2 Pitch Perfect Threading 3 Process considerations Threading methods Existing Is the process stable today Is the productivity maximized Is chip control acceptable Is the quality
More informationUnit 047: Advanced Turning. Screw threads
Unit 047: Advanced Turning Screw threads Starter activity When was the screw thread invented? Who was the inventor of the most famous screw thread form? When was the first unified British thread invented
More informationNew Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi
www.vargus.com For Extra Large Pitches New Standard Line for Heavy Duty Applications with Extra Large Pitches up to 24mm or 1tpi Offering a wide range of profiles for internal and external applications:
More informationTH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$15.
New Swanson Gages TH READ GAGES Certification of Compliance to Class (Short Form)... No Charge Certification of Calibration to Size (Long Form)...$. / member TA PER PIPE GAGES Certification of Compliance
More informationMMT series. MMT series for precise and efficient threading. New Threading Tools
New ing Tools 2005.6. Update B053G Expanded Insert MMT series MMT series for precise and efficient threading Series expanded, additional M-class inserts with 3-D chip breakers Tough new grade, VP15TF for
More informationSpotlight.
Spotlight www.vargus.com Professional Threading Solutions Expanded Line of Thread Turning Solutions for the Oil and Gas Industry Solutions for Rotary Drill Stem Connections Unique insert design with strengthened
More informationMMT series for precise and efficient threading
New Threading Tools MMTseries B053E MMT series for precise and efficient threading Series expanded, additional M-class inserts with 3-D chip breakers`. Tough new grade, VP15TF for G-class inserts New Threading
More informationSECTION CONTENTS ADAPTOR SERIES. General Information. Explanation of ISO Pipe Thread. Thread Symbol List. ANSI-KF Tubulated Adaptor
SETION ONTENTS 05 General Information Explanation of ISO Pipe Thread Thread Symbol List ANSI-KF Tubulated Adaptor ANSI-KF Tubulated Adaptor with O'Ring Groove F-ISO Tubulated Adaptor F-KF Tubulated Adaptor
More informationSINGLE POINT TOOLS. Mini Boring Bars Mini Boring Bars come in a range of diameters from to inch. They are fluted for maximum strength.
SINGLE POINT TOOLS All single point tools are designed for internal machining on a lathe. The helical boring bars can be used for both lathe and mill applications. All cutting tools are made from premium
More informationThread Mills.
Tool Selection Internal Threads......................................................S2 Tool Selection UN Internal Threads.......................................................S3 Indexable End Mills Weldon
More informationTOOL NEWS Update US001. Threading. Product Expansion Pages Precise and Efficient Threading Products
TOOL NEWS 2017.6 Update US001 Threading Precise and Efficient Threading Products Product Expansion Pages 64-89 THREADING CLASSIFICATION EXTERNAL CUTTING Name of Tool Holder Insert Shape Features MMTE Holder
More informationKORLOY CUTTING TOOLS
2016 2017 KORLOY CUTTING TOOLS CONTENTS GRADES & CHIP BREAKERS TURNING ULTI FUNCTIONAL TOOLS A A02 A03 A04 A11 A13 A15 A18 Grades Korloy grades system Turning Grades Turning grade selections CVD coated
More informationYour Partner For Clever Tooling. Cutting Tools. Manufacturer of Precision Tools Since 1974
Your Partner For Clever Tooling Cutting Tools Manufacturer of Precision Tools Since 1974 mimatic GmbH Westendstraße 3-87488 Betzigau +49 (0) 831 / 5 74 44-0 +49 (0) 831 / 5 74 44-90 * info@mimatic.de
More informationThreading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING
Threading - Hand Taps - Button Dies - Die Nuts - Screw Extractors - Holders - Sets THREADING Threading Threading Index 198 Dies Carbon, Button Dies BA 198 Dies Carbon, Button Dies BSB 197 Dies Carbon,
More informationGagemaker Products. Automotive Oil & Gas Renewable Energies
Gagemaker Products 102 Automotive Oil & Gas Renewable Energies GAGEMAKER PRODUCTS Aerospace Mechanical Engineering 103 Gagemaker Products MRP-1000 MRP-1001 MRP-2001 MRP-2002 MRP-2511 MRP-2512 MRP-3001
More informationThreading Tools. Threading tools overview A 286. Legend. Thread name. Profil GM Shape of insert (length: 11, 16, 22mm)
A TURNING Threading tools overview Threading Tools Applications For general use Legend Parting and Thread name ISO metric thread With end pitch thread Without end pitch thread Without end Profil GM 60
More informationMEET OUR TEAM. North American Tool Corporation 215 Elmwood Avenue, PO Box 116, South Beloit, IL CURTIS LANSBERY PRESIDENT & CEO
MEET OUR TEAM CURTIS LANSBERY PRESIDENT & CEO BRIAN KOBISCHKA VICE PRESIDENT & CFO PHIL SAMUELS DIRECTOR OF SALES & MARKETING JEFF SHERMAN DIRECTOR OF MANUFACTURING JON ANDERSON JOY BALDWIN BARB BISHOP
More informationINDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012)
Trade Combine Birla Precision Technologies Limited INDIAN TOOL MANUFACTURERS (DIVISION) PRICE LIST 412 (Effective from 01/04/2012) HSS PARALLEL SHANK (JOBBER SERIES) TWIST DRILLS IS: 5101 MM SIZE INC H
More informationTHREAD MILLING. A Quick Reference Pocket Guide. Overall Length. Length of Cut. Cutter Diameter.
THREAD MILLING A Quick Reference Pocket Guide Overall Length Length of Cut Shank Diameter Cutter Diameter www.alliedmachine.com Whatever type of holemaking you do, Allied is here help. Whether you re a
More informationINNOVATIONS CATALOG Indexable Thread Milling
www.kennametal.com INNOVATIONS CATALOG Indexable Thread Milling NEW Indexable Thread Milling Products The latest Kennametal Indexable Thread Milling tools deliver longer tool life and higher productivity
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
Threading Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Threading Index 148 Threading Taps Carded 149 Threading Taps Bulk Metric 150 Threading Taps Bulk Metric
More informationThread Milling Tools
Thread Milling Tools 1 MIING INRODUCTION SOID MIING TOOS ISO HEICA FUTES UN HEICA FUTES NPT HEICA FUTES NPTF HEICA FUTES BSP HEICA FUTES BSPT HEICA FUTES PARTIA PROFIE SINGE TOOTH ISO TEETH 2D ISO TEETH
More informationGrades Korloy grades system
CONTENTS GRADES & CHIP BREAKERS HSK/ K Tooling system B156 B159 B165 TURNING Cartridge Code System (ISO) HSK tooling system K tooling system ULTI FUNCTIONAL TOOLS A A02 A03 A04 A11 A13 A15 A18 Grades Korloy
More informationSPOTLIGHT 2018 METRIC
SPOTLIGHT 2018 METRIC Advanced Threading Solutions Innovative Grooving & Turning Solutions www.vargus.com Thread Turning External Toolholders with Coolant Thru Precise coolant thru, designed to efficiently
More informationICON LEGEND & DESCRIPTION HSS CBA. Co8e. Material. TiN TYPE W TYPE N ISO 529 DIN H 7. Point Angle. Lengths. Flute Helix Angle HSSE V3
ICON EGEN & ECRIPTION Material H HE High peed teel 3% Vanadium High peed teel H Co5 5% Cobalt High peed teel H Co8 * *OI 9-10% Cobalt, CARBON CARBIE 0.2-0.8 µm Grain size. TEE 8% Cobalt High peed teel
More informationThread Milling Toolholders. TM Holders
Thread Milling Toolholders MIING TOOHOERS Contents VAREX System Standard Toolholder TM ong Shank Toolholder TM Coarse Pitch Toolholder 124/... Taper Thread (NPT, NPTF, BSPT) Toolholder TMN Twin Flutes
More informationHIGH PERFORMANCE CARBIDE THREAD MILLS
HIGH PERFORMANCE CARBIDE THREAD MILLS TM Series HIGH PERFORMANCE CARBIDE THREAD MILLS table of contents Introduction... page 1 Understanding Milling... page 2 Niagara Mill Advantages... page 3 High Performance
More informationThe gauges must be preset to a Nominal predetermined dimension using gauge blocks, micrometers, or the MIC TRAC measurement centre.
Functional PD Thread Gauges The Gagemaker PG-6000 and RG-7000 Series gauges measure diameters of internal, and external threads respectively. Both series of these functional diameter gauges inspects the
More informationApplication and Technical Information Thread Milling System (TMS) Minimum Bore Diameters for Thread Milling
Inserts Application and Technical Information Minimum Bore iameters for Thread Milling UN-ISO-BSW tpi 48 3 4 0 16 1 10 8 7 6 5 4.5 4 Technical ata Accessories Vintage Cutters Widia Cutters Thread Milling
More informationThread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
More informationBritish Standard Pipe Tapered
British Standard Pipe Tapered Information / Identification BSPT connections, just as NPT connections, seal by thread interference. BSPT connections are the same as JIS Tapered Pipe, Whitworth Tapered Pipe
More informationTurning Handbook. General turning - Parting and grooving - Threading
Turning Handbook General turning - Parting and grooving - Threading Your conditions There are several things to consider before starting machining. Component Operation (e.g. external/internal, profiling,
More informationHEMCO. Gages. Specialists in Chrome Gaging. The Longer Lasting Gage. American Petroleum Institute. Spec 5B Spec 7 Spec 11AX Spec 11B
The Longer Lasting Gage Gages Specialists in Chrome Gaging ISO/IEC 17025 & ANSI/NCSL Z540-1 to Accredited by the American Association for Certificate #2279.01 Laboratory Accreditation American Petroleum
More informationStep Drills HSS 5. Countersinks/Counterbores and Core Drills HSS 7
Twist Drills HSCo Twist Drills /HSCo Twist Drills with straight shank 2-4 Twist Drills /HSCo Twist Drills with taper shank 4-5 Page Carbide Twist Drills Carbide Twist Drills Solid Carbide/Carbide Tipped
More informationSCREW THREADS. = minor diameter. d 3. d 2. = pitch diameter
ISO : 6 Part 2 DIN : Part /20 Metric (ISO) screw thread, coarse series -M- T-00 T-002 for M to incl. M,4, fit H/6h The bold lines indicate the maximum material profiles. The maximum material profile of
More informationtel fax
distributed by : Newman Tools Inc. Tel 1-800-465-1384 Fax 1-800-605-2442 Tel 613-836-6776 Fax 613-836-9070 www.newmantools.com thread mills - product overview Thread Mills cut a thread using helical interpolation.
More informationOperating instruction for the quick-change adapters type:
type: EM 00 - U EM 01 - U EM 03 - U EM 04 - U EM 05 - U EM 01 U / IKZ EM 03 U / IKZ EM 04 U / IKZ EM 05 U / IKZ Date of edition: 01.02.2008 Stage of alteration: 2 Please keep this for future use! Contents:
More informationHow To Use This Catalog
How To Use This Catalog Welcome To RSVP Circular Chasers Axial Radial Specialty Tools Welcome To The RSVP Tooling Interactive Catalog Section Clickable & Touch Links Within each page we have included a
More informationPIONEER TRADING CO., LTD.
PRECISION KURODA LTD. OIL COUNTRY GAUGES API THREAD GAUGES PREMIUM CONNECTION GAUGES THREAD MEASURING INSTRUMENTS CONTACT TO: PIONEER TRADING CO., LTD. 4-1 Kuzuha-Asahi 3-Chome Hirakata Osaka 573-1111,
More informationThread and End Connection
www.swagelok.com and End Connection I d e n t i f i c a t i o n G u i d e Contents Introduction and End Connection Terminology.. 4 General Terminology................... 5 Step-by-Step Identification
More informationWe can supply the following Types of Tap with All STANDARD s like ISO, BS, DIN, JIS, ANSI etc. Spiral Point. Right & Left Hand Slow helix 0 0
TAP MANUFACTURING MIRANDA Ground Tps will be supplied in M, M5, M Grde of HSS. Tps of di 7. & below will be supplied with externl (mle) center on both side or chmfer t Shnk side. And di nd bove will be
More informationBULLDOG CUTTING TOOLS PROUDLY MADE IN THE USA THREAD MILLING
BULLDOG CUTTING TOOLS THREAD MILLING 126 Jackson St. Red Bud, IL 62278 Toll Free Phone: 1 (844) 441-5624 Fax: (618) 282-2831 sales@bulldogcut.com PROUDLY MADE IN THE USA SAFETY PRECAUTIONS Cutting tools
More informationExtracts without expanding material Ideal for pipes and fittings Works on left-hand or right-hand threads
Serious Solutions for Stuck Fasteners IRWIN Tools has the solution to deal with a stuck fastener, a rounded or broken head, a snapped stud, or a stripped screw or fitting. Five different styles of extractors
More informationOWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir of Engineering
KRESS CORPORATION ENGINEERING Design of Thru and Threaded Holes Standard DOC ID 095007 REVISION A TYPE PORTAL OWNER: POSITION AUTHOR: POSITION Dan Boettcher Director of Engineering Richard Richardson Vice-Dir
More informationTAP & DIE PRICE LIST INDEX
TAP & DIE PRICE LIST INDEX ANPT Die Page 4 BA Die Page 4 BA Tap Page 17 BSF Tap Page 19 BSB Die Page 4 BSB Tap Page 17 BSCY Tap Page 17 BSF Die Page 3 BSP Die Page 4 BSP Tap Page 18 BSPT Die Page 4 BSPT
More informationTurning inserts CNMG-DF CNMG-SF CNMG-EF CNEG-NF DNMG-DF DNMG-SF DNMG-EF DNEG-NF SNMG-DF SNMG-EF SNMG-SF TNMG-DF TNMG-SF TNMG-EF VNMG-DF
Shenzhen Lys Technology Co., Ltd Turning Product overview Turning inserts For finishing CN-DF CN-SF CN-EF CNE-NF DN-DF DN-SF DN-EF DNE-NF SN-DF SN-EF SN-SF TN-DF TN-SF TN-EF VN-DF VN-EF VNE-NF VN-SF WN-DF
More informationOffered by Automation and Metrology Inc. Please call us if you need any additional help Office FAX.
Automation and Metrology, Inc. www.auto-met.com 130 Liberty St., Painesville OH 44077 Phone 440-354-6436 Fax 639-9983 - Gaging Basics Offered by Automation and Metrology Inc. Please call us if you need
More information2 edges Tip-Bar for micro boring HP type
2 edges Tip-Bar for micro boring P type New proposal for cost reduction igh cost performance with 2-edge insert Boring Back Boring Grooving ace Grooving Threading rom -edge to 2-edge insert 2 edges Tip-Bar
More informationThreading Threading Application Guide...E4 E5 TopThread Threading...E4 Laydown Threading...E5
Threading Threading Application Guide.........................................................................E4 E5 TopThread Threading.............................................................................................E4
More informationUnderstanding pipe threads: types and designations
WHITE PAPER 8008 Understanding pipe threads: types and designations By Mark Schmidt Applications Engineer CPC (Colder Products Company) Different types of screw threads have evolved for fastening and hydraulic
More informationThreading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets
THREADING Threading -Hand Taps -Button Dies -Die Nuts -Screw Extractors -Holders -Sets Threading Index Hand Taps - Carded Metric Coarse UNF BSW 93 93 93 Hand Taps - Bulk Metric Coarse Metric Fine Metric
More informationFASTENERS. Aylin YENİLMEZ GÜRKÖK
FASTENERS Aylin YENİLMEZ GÜRKÖK FASTENERS A fastener is a hardware device that mechanically joins or affixes two or more objects together. Welding, Soldering, Nuts & Bolts, Washers, Screws, Clips, Clamps,
More informationThreading insert. Six series. New product for turning
New product for ISO metric thread Six series pitch thread Whitworth thread Unified thread British standard pipe thread American standard pipe thread Fully ground high precision inserts for high quality,
More informationCUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
More informationCUTTING TOOLS FROM SANDVIK COROMANT. Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING
CUTTING TOOLS FROM SANDVIK COROMANT Small part machining TURNING PARTING AND GROOVING THREADING MILLING DRILLING Table of contents Introduction 2 Sliding head machines 4 Ordering information 55 Application
More informationTap Drill Chart. Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size
Tap Drill Chart Tap Size Nom. Size Tap Cutting Tap Drill Size Metric Tap Drill Size (Recommended Drill Sizes Suitable for 6H Tolerance) Roll Form Tap Drill Size Machine Screw Sizes NC & NF Tap Size Cutting
More informationISO B-Profile 60-Series. Body Size 1/8" up to 2 1/2" ISO B. ISO Standard. Ball Locking. Medium Pressure
Ball Locking ISO B ISO 7241-1 Series B 1/8" up to 2 1/2" ISO B-Profile Working Pressure Low Cycle, non-pulsating pressure rating Steel Stainl. Steel Brass 1/8" 350 bar 350 bar 210 bar 1/4" 350 bar 350
More informationmass flowmeter for compressed air
mass flowmeter for compressed air VARIOMASS MF High End electronic for air measurement & analyse - 1 - The VARIOMASS flow meter for compressed air is a comfortable system for air mass flow measurement,
More informationFLO-LOCK. hand of insert. Right. insert groove width. Inch/Metric sizes Example: Inch:.125 = 125 Metric: 1,50 = 150
lo-lock Grooving/hreading Insert Identification hart L G P 3 M 125 type of insert L lo-lock G J U V K P insert style additional info cme lank PI hread ace grooving Grooving UNJ hread ull adius hread Undercut
More informationTrade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2
Trade of Toolmaking Module 1: Induction & Bench Fitting Unit 4: Hole Tapping Phase 2 Published by SOLAS 2014 Unit 4 1 Table of Contents Document Release History... 3 Unit Objective... 4 Introduction...
More informationResistance thermometers for process technology
Data Sheet 90.2820 Page 1/8 Resistance thermometers for process technology for temperatures from -200 to +600 C with protection tubes in stainless steel, titanium, tantalum, Iconel and Hastelloy available
More informationSERIES BXB Bottom Chamfer Thredfloers
SERIES BXB Bottom Chamfer s Size H2 H3 H4 H5 H6 H7 H8 H9 H10 H11 H12 H13 H14 0-80 10002 10003 10004 10005 10006 10007 1-64 10122 10123 10124 10125 10126 10127 1-72 10242 10243 10244 10245 10246 10247 2-56
More informationINDUSTRIAL CONTROL INSTRUMENTS FOR PROCESS AUTOMATION. Configuration. Installation
Overview Configuration Installation 19 beam width: 1.5 horn = 19 2 horn = 15 3 horn = 10 4 horn = 8 is a 2-wire, 25 GHz pulse radar level transmitter for continuous monitoring of liquids and slurries in
More informationUNIT 9b: SCREW FASTENERS Introduction Functions Screw Features Elements Terms of a Thread Profile
UNIT 9b: SCREW FASTENERS Introduction A mechanical screw is a cylinder or cone that has a helical ridge called a thread. A helix has one or more turns, so a screw can have several turns. If the helix is
More informationLEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY
LEADING SOLUTIONS IN THREAD MILLING TECHNOLOGY Thread with Maximum Confidence, Depth, Versatility and Economy. Emuge Shur-Thread TM, Threads-All TM, Vario-Z and NPT Solid Carbide Thread Mills; and Gigant-ic
More informationCH # 8. Two rectangular metal pieces, the aim is to join them
CH # 8 Screws, Fasteners, and the Design of Non-permanent Joints Department of Mechanical Engineering King Saud University Two rectangular metal pieces, the aim is to join them How this can be done? Function
More informationKORLOY CUTTING TOOLS 2015
KORLOY CUTTING TOOLS 2015 CONTENTS A Grades & Chip Breakers Grades A02 Turning Grades A03 A04 A08 A11 A12 A13 Korloy grades system Turning grade selections CVD coated grades PVD coated grades Uncoated
More informationSection Member. H (in.) WT. lb./ft. Pull Out Strength Slip Resistance Torque Size / Thread All Series
Design Data Channel TABLE 1 Elements of Sections Properties for Design Single Channels Nominal Thickness (inches) ga = 0.105 ga = 0.075 16 ga = 0.060 Double Channels LEGEND I Moment of inertia S Section
More informationRTD & THERMOCOUPLE SENSOR ASSEMBLIES Sensors RTD & T/C Pricing Effective July 1, to December 31, 2017
Wahl WR Series Industrial RTD Probes Ordering Form Step 1 - Select: RTD Sensor from WR Codes WR1 RTD Sensor - Standard 304 SS WR2 RTD Sensor - Standard 316 SS Step 2 - Select: Process Connection from corresponding
More informationINDEX. List Price Catalog - Current Pricing On Our Website. List Price Catalog - Check Website For Current Pricing. * = additional sizes added
INDEX List Price Catalog - Check Website For Current Pricing * = additional sizes added PG CATEGORY NOTE 4 Threadmill - UNC/UNF * 5 Threadmill - UNC/UNF (Continued) & Thread Pac 6 Threadmill - NPT/NPTF
More informationNew 700LX Series RAPIDUCTION Pipe & Bolt THREADING MACHINES THE OSTER MANUFACURING COMPANY, OWOSSO, MICHIGAN, USA
New 700LX Series RAPIDUCTION Pipe & Bolt THREADING MACHINES THE OSTER MANUFACURING COMPANY, OWOSSO, MICHIGAN, USA WWW.OSTERMFG.COM 700LX - SERIES PRODUCTION CALIBER PIPE & BOLT THREADING MACHINES The
More informationFlame. Tree Pointed. Product Barcode Price Ø Length Shank Code
Workshop Range 28 Carbide Burs 29 HSS Countersinks 29 HSS Deburring 30 HSS Step Drills 30 Thread Gauges 31 Warragul Dies 32 Screw Extractors 33 Grabit Screw Extractors 34 Black Books Are you passionate
More informationKORLOY CUTTING TOOLS
2018 2019 KORLOY CUTTING TOOLS Turning Milling Holemaking Endmilling CONTENTS GRADES & CHIP BREAKERS A02 Grades Korloy grades system Turning Grades A04 Turning grade selections A05 A14 A17 A19 A22 CVD
More informationTECHNICAL MANUAL CALIBRATION PROCEDURE FOR THREADED PLUG GAGES. This publication replaces T.O. 33K dated 30 January 2013.
TECHNICAL MANUAL CALIBRATION PROCEDURE FOR THREADED PLUG GAGES This publication replaces T.O. 33K6-4-203-1 dated 30 January 2013. Distribution Statement C - Distribution authorized to U. S. Government
More informationIntroducing a comprehensive range of New Indexable Thread Milling Tools and New Thread Milling Software for Tool Selection and CNC Programming
Januar 19, 2015 Page - 1 - Introducing a comprehensive range of New Indexable Tools and New Software for Tool Selection and CNC Programming TM24 Series TM25 Series TM40 Series TM41 Series KTMD-U Series
More informationBuyer s Handbook 2015
Valid from May 15, 2015 to Dec. 31, 2015 Prices Subject to Change Without Notice & Stock Availability. SERVING WESTERN CANADA FOR OVER 50 YEARS 100% CANADIAN OWNED A.C.T. Equipment Sales Ltd. Terms & Conditions
More informationALFRA hole punches application overview
ALFRA hole punches application overview ALFRA HOLE PUNCHES MonoCut ALFRA HOLE PUNCHES TriCut ALFRA HOLE PUNCHES TriCut+ ALFRA HOLE PUNCHES TwinCut Suitable for Sheet steel S5 F 70 N/² Stainless steel F
More informationJUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor
sales@jumo.co.uk info.us@jumo.net Vorläufig V Page 1/8 JUMO BlackLine CR-GT/-EC/-GS Conductive 2-Electrode Conductivity Sensor Cell constants K = 0.01 1.0 202922 Series for universal application, e.g.
More informationTaps. Taps - Technical Info. Torque Cut High Performance HSSE Ring Colored Taps Technical Information. - Technical Information
Torque Cut High Performance HSSE Ring Colored Taps Technical Information RedLine Torque Cut High Performance Taps give you greater performance when tapping Steel Alloys, Stainless Steels, Titanium and
More informationAnnexe to: IECEx SIR U Issue 5 Redapt Engineering Co. Limited Electrical Component: Ranges of Adaptor, Reducers and Stopping Plugs
Product Descriptions and Codings Adaptors and Reducers The AD-U series adaptors and RD-U series reducers each comprise a metallic, hexagonal, hollow body with an external male thread and an internal female
More informationOperating Manual. Thread Cutting Heads Z39-2 Z39-K
Operating Manual Thread Cutting Heads Z39-2 Z39-K Table of Contents 1. Preface 3 2. Security advice 5 3. Range of application 6 3.1. Cutting parallel external threads 6 3.2. Cutting taper external threads
More informationSpotlight
Spotlight 2010 www.vargus.com Specials Advanced Tailor Made Solutions Inserts Solid Carbide Toolholders Mega Line Special Solution for Extra Large Pitches (up to 24mm) Designed to be extra tough, use the
More informationQuality Policy Statement
Table of Contents Quality Policy Statement... Page 2 Warranty Statement.... Page 2 Calibration Service... Page 3 Facility... Page 4, 5 Machining, Grinding, Leadscrew Products And Services.... Page 5 Thread
More informationThread Identification Guide
Thread Identification Guide At Trimantec, our sales department gets a number of questions regarding technical specs for industrial parts. One of the concepts that seems to stump a lot of people is port
More informationLevel Measurement Continuous level measurement Radar transmitters
Overview Configuration Mounting on a nozzle is a 2-wire 25 GHz pulse radar level transmitter for continuous monitoring of solids and liquids in storage vessels including extreme levels of dust and high
More informationOptional end of travel limit switches for user setting of minimum and maximum pressure values.
A M/P Converters Features (Varies with s) AC Control Unit (CC) Output pressure locks in last position in event of power failure. Continuous AC Motor unit is instant start-stop, heavy duty impedance protected
More informationOptional end of travel limit switches for user setting of minimum and maximum pressure values.
A M/P Converters Features (Varies with s) AC Control Unit (CC) Output pressure locks in last position in event of power failure. Continuous AC Motor unit is instant start stop, heavy duty impedance protected
More informationModel 2400 Explosion-Proof M/P Converters -- LOCK IN LAST POSITION --
A Explosion-Proof M/P Converters -- LOCK IN LAST POSITION -- Electrical AC Control Unit Motor Voltage...115vAC, 60Hz Power Consumption (watts) 10 Regulator...5(Max.) 16 Regulator...3(Max.) 80 Regulator...3(Max.)
More informationFasteners. Bolts. NAPA FastTrack Counter Sales Training Fasteners Page 1. Figure 1. Typical Measurements for a Bolt or Hex Head Cap Screw
Fasteners Many types and sizes of fasteners are used in the automotive industry. Each fastener is designed for a specific purpose and condition. One of the most commonly used type of fastener is the threaded
More informationUseful accessories for lathe and milling systems.
1 Useful accessories for lathe and milling systems. Nearly all accessories are supplied in wooden boxes. For proper and value preserving storage! Dividing attachment TA 250 For precision lathe PD 250/E,
More informationTechnical Description Standard design with ball locking mechanism for high pressure applications. Rugged construction.
Ball Locking Parker 1/4" up to 3/4" SM-Series Technical escription Standard design with ball locking mechanism for high pressure applications. Rugged construction. dvantages size 1/2" and above feature
More informationMetals can be bought from suppliers in standardized forms and sizes, such as round,
1.4 METAL CUTTING BAND SAWS: Metals can be bought from suppliers in standardized forms and sizes, such as round, rectangular or square bar stock or in the form of large sheets (plates). Bar stock normally
More informationEngineering Excellence. Diam nd. FLANGES & FITTINGS P r i v a t e L i m i t e d
Engineering Excellence Diam nd FLANGES & FITTINGS P r i v a t e L i m i t e d COMPANY PROFILE Company Profile Diamond Flanges is a dream venture conceived by Mr. S.K. Bhimsaria back in 1975. What was a
More informationSCREW THREAD REPRESENTATION
Engineering Drawing and Related Documentation Practices ASME Y14.6-2001 [Revision and Consolidation of ANSI Y14.6-1978 (R1998) and ANSI Y14.6M-1981 (R1998)] SCREW THREAD REPRESENTATION An American National
More informationA BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY
2011 Threading Solutions for Every Industry A BALAX, INC. GUIDE TO TAPPING IN THE 21ST CENTURY At Balax, we recognize the increased demands placed on our customers for improved quality and lower production
More informationCombiTemp TCR6 Standard RTD temperature sensor
Main features Sensor and connection in stainless steel, ISI 6 DIN form B housing Robust design pplications Industrial applications with industrial process connection Pipe systems Heating systems Water
More informationTHREAD CUTTING & FORMING
THREAD CUTTING & FORMING Threading, Thread Cutting and Thread Rolling: Machining Threads on External Diameters (shafts) Tapping: Machining Threads on Internal Diameters (holes) Size: Watch to 10 shafts
More informationEKONOGAGE. HEMCO Gage
Clicking on a picture will take you to that catalog page. Clicking on in upper right corner will take you to the index on page 2. EKONOGAGE by Prices Subject to change without notice. Written Quotations
More informationStock Programme Scope of Supply. v
Scope of Supply v2.10 2018 Pipe: Seamless Stainless Steel ASTM A312 ASME B36.19 TP316/316L DN15 DN250 10S 160 Stainless Steel ASTM A312 ASME B36.19 TP304/304L DN15 DN200 10S 160 Low Temp ASTM A333 ASME
More information