Installing Laminate Countertops [1]

Transcription

1 [1] Submitted by Ana White [2] on Fri, :01 Page 1 of 30

2 Page 2 of 30

3 [1] So where were we... We got kitchen cabinets built [3], then we DIYed a laminate countertop [4], Page 3 of 30

4 Now it's time to install them!!! Most countertops are just glued down, but remember us? And our overbuilding, do-it-right-the-first-time issues? Yeah, glue just not going to be enough for us. I know it would work just fine... but why not add some screws too? Help us. Page 4 of 30

5 For the blind corner, we had a empty space, in the corner, so we blocked it with 2x4s. The blocking will support the countertop. It's screwed to studs in the wall. Page 5 of 30

6 The other corner doesn't need blocking (remember our overbuilt lazy susan corner cabinet [5]?), but we are going to do some mods to the cabinets to secure the countertops to them from the underside. Page 6 of 30

7 Page 7 of 30

8 Where we could on the outsides, we used our Kreg Mini Jig to drill pocket holes facing upward (NOTE: We should have done this when we built the cabinets, it would have been easier). Where we couldn't drill pocket holes on the outsides because the Page 8 of 30

9 neighboring cabinet is installled on the outside, we drilled pocket holes facing upward on the insides. See the pocket holes facing upward? Page 9 of 30

10 So once we have enough pocket holes drilled facing upward on the cabinets, it's time to attach the countertop. Page 10 of 30

11 We applied glue, Page 11 of 30

12 Page 12 of 30

13 Set the countertop in place with glue, And then attached through the predrilled pocket holes with screws. Remember, the stove is going in this opening, so we aren't concerned about the pocket holes showing. Page 13 of 30

14 Here's on the other side of the range. Page 14 of 30

15 And where we didn't have the luxury of pocket holes on the outside, we attached from the inside. Page 15 of 30

16 And then finally secured the dishwasher end panel to the countertop, making sure it was evenly spaced to allow for the dishwasher to fit in. And that's the main countertop. Now we had considered just purchasing off the shelf laminate countertops - would have been a little more expensive, but a lot less work. BUT - you can't buy an off the shelf laminate bar top, with three sides finished... Page 16 of 30

17 So we DIY. Page 17 of 30

18 Page 18 of 30

19 Since the bar top is over drywall, we won't be able to use pocket holes to secure the countertop to the bar. So the Ram had this great idea to attach 3/4" plywood to the top of the drywalled bar, Page 19 of 30

20 Page 20 of 30

21 Screwing to studs in the bar, Page 21 of 30

22 Page 22 of 30

23 And then going a little crazy with glue on top. We built the bar top so it'll fit right over the plywood piece, Page 23 of 30

24 So it just fits on top, Page 24 of 30

25 And then we can go underneath, and add a few screws through the plywood into the underside of the laminate countertop. Here's what the countertop looks like, a couple months later, after a few kids have jumped on them, and Grandma's been using them... Page 25 of 30

26 Page 26 of 30

27 No wiggles, no scratches, no heat burns, nothing. Page 27 of 30

28 Page 28 of 30

29 And Grandma loves them!!!! Definitely worth the extra DIY effort! Have a great weekend! XO Ana + Fam main_category: Momplex [6] Momplex Vanilla Kitchen [7] Sponsor Box: <script type="text/javascript" src=" memedia.com/script_serve.php?st=hhm.anawhite&zn=lowes&sz=300x 60"></script> Momplex: Kitchens [8] Source URL: aminate-countertops Links [1] ntertops [2] [3] [4] [5] [6] [7] Page 29 of 30

30 anilla-kitchen [8] Page 30 of 30