Tryde End Table with Shelf - Updated Pocket Hole Plans [1]

Transcription

1 [1] Submitted by Ana White [2] on Tue, :17 [1] Hi everyone! We are still chugging away at Momplex Unit Sewing Mom... so so so close! Page 1 of 13

2 But not quite there yet... And while I've been working away, I am always daydreaming about the furniture - about getting to build each piece, by hand, customizing it for exactly what Mom needs to fit the space best. We'll be needing end tables for the living room, and one of my favorites is this end table, the Tryde End Table [3]: Page 2 of 13

3 Built by exuma_momma [4] Page 3 of 13

4 And I also love how Jeff from A Touch of Arkansas [5] modified this plan to add a shelf - great for small spaces where any extra storage is appreciated. So I wanted to take a second and get you new updated plans for this end table that use pocket holes (for those of you with a Kreg Jig). You can also check out the original Tryde End Table plans here. [3] Page 4 of 13

5 And the matching coffee table plans are here. [6] Off to work! XO Ana Summary: Free plans to build an end table with shelf out of 5-2x4s! From ana-white.com CategoriesProject Type: Side and End Table Plans [7] Room: living room [8] Skill Level: Intermediate [9] Style: Farmhouse Style Furniture Plans [10] Dimensions: Dimensions are shown above. Dimensions: Page 5 of 13

6 8 feet long 2-1/2" pocket hole screws Tools: Page 6 of 13

7 [11] [12] [13] Page 7 of 13

8 [14] Cut List: /2" (legs) 14" CUT TO FIT WIDTH OF 4-2x4s!!! (shorter aprons) 16" (longer aprons) 16" (bottom shelf shorter pieces) 19" (bottom shelf longer pieces) 23" (tabletop boards) General Instructions: Please read through the entire plan and all comments before beginning this project. It is also advisable to review the Getting Started Section. Take all necessary precautions to build safely and smartly. Work on a clean level surface, free of imperfections or debris. Always use straight boards. Check for square after each step. Always predrill holes before attaching with screws. Use glue with finish nails for a stronger hold. Wipe excess glue off bare wood for stained projects, as dried glue will not take stain. Be safe, have fun, and ask for help if you need it. Good luck! Step 1 Page 8 of 13

9 [15] Place your four longer bottom shelf boards together and measure the overall width of the shelf. This measurement should be close to 14". Cut your shorter aprons to this length. Then drill (2) 1-1/2" pocket holes on each end of each of the apron boards and attach to legs to build the two end leg sets. NOTE: You'll want to also drill 1-1/2" pocket holes (about 2 per apron facing upward, bottom aprons too) for attaching the shelf/tabletop in later steps. Step 2 Page 9 of 13

10 [16] Drill 2 1-1/2" pocket holes per end of each of the longer apron boards and attach to the legs with 2-1/2" pocket hole screws. NOTE: You'll want to also drill 1-1/2" pocket holes (about 2 per apron facing upward, bottom aprons too) for attaching the shelf/tabletop in later steps. Step 3 Page 10 of 13

11 [17] You may wish to attach the tabletop first for easier access to the underside (see next step). Build your bottom shelf first with 1-1/2" pocket holes and 2-1/2" pocket hole screws. Then fit inside and attach through the predrilled pocket holes in aprons with 2-1/2" pocket hole screws. Step 4 Page 11 of 13

12 [18] Build tabletop first, then attach completed tabletop to the base through pocket holes on underside, as you did the bottom shelf. Finishing InstructionsPreparation Instructions: Fill all holes with wood filler and let dry. Apply additional coats of wood filler as needed. When wood filler is completely dry, sand the project in the direction of the wood grain with 120 grit sandpaper. Vacuum sanded project to remove sanding residue. Remove all sanding residue on work surfaces as well. Wipe project clean with damp cloth. It is always recommended to apply a test coat on a hidden area or scrap piece to ensure color evenness and adhesion. Use primer or wood conditioner as needed. Page 12 of 13

13 Source URL: e-shelf-updated-pocket-hole-plans Links [1] ted-pocket-hole-plans [2] [3] [4] [5] aw.html [6] et-holes [7] [8] [9] [10] [11] [12] [13] [14] [15] jpg [16] jpg [17] jpg [18] jpg Page 13 of 13