Wood Cash Register DIY Plans [1]

Transcription

1 [1] Submitted by Ana White [2] on Thu, :44 Page 1 of 18

2 [1] Additional Photos [3] Page 2 of 18

3 [4] [5] [6] For a few years now, Jaime from That's My Letter [7] and I have been wanting to add a wood cash register toy plan to our Handbuilt Holiday [8] collection. Page 3 of 18

4 [8] This week we are finally doing it!!! Wood Cash Register This solid wood cash register is easy to build and easy to customize for the perfect holiday gift! Page 4 of 18

5 We are keeping things simple, with an easy hinge up top - Page 5 of 18

6 Doesn't get much simpler than that! Simple to build, simple to use! Page 6 of 18

7 And we've designed the entire project to be scrap wood pile friendly. Jaime used 3/4" plywood for her project, but the plans are sized for standard width 1x boards for those of you without a table saw. And let's not forget the coins and credit cards and cash... scrap plywood and dowel pieces of course! There's plenty of time to make this little handmade wood cash register for the Holidays, and Jaime and I are here to help. You'll find the free plans following (if this is the homepage you'll need to click READ MORE below). But before we get to the plans, take a second to visit That's My Letter for more photos and build details. [9] XO Ana Page 7 of 18

8 CLICK HERE FOR MORE PHOTOS AND BUILD DETAILS AT THAT'S MY LETTER [9] Summary: Make this cute wood cash register! Simple hinge top. Free plans by ANA-WHITE.com CategoriesProject Type: Toys [10] main_category: Handmade Holidays [11] Room: Kids and Toys [12] Skill Level: Beginner [13] Style: Children's and Kid's Room Furniture and Toy Plans [14] Dimensions: Dimensions shown above Page 8 of 18

9 38" of 1x12 boards 12" of 1x2 12" of 1x3 12" of 1x4 1/4" plywood 13-1/4" x 8" 1 set of hinges soft close pads wood glue 1-1/4" and 3/4" nails or your preferred method of fastening Page 9 of 18

10 Tools: [15] Page 10 of 18

11 [16] [17] [18] [19] Cut List: 8" - sides 11-3/4" - bottom 11-3/4" front 11-3/4" - top 11-3/4" - top front 1-1/4" 13-1/4" x 8" - back 8-1/4" both ends bevel cut at 15 degrees off square (optional) hinged top Page 11 of 18

12 [20] From the 1x12 side pieces, mark out the side profiles. Cut carefully with a jigsaw and sand all edges. Page 12 of 18

13 [21] Attach sides to the bottom. You can use Kreg Jig, screws or 1-1/4" nails and glue to attach (all joints are reinforced). Page 13 of 18

14 [22] Attach top and front, 1-1/4" nails and wood glue or wood screws. NOTE: The front piece should be notched out as Jaime did to prevent a hard closing hazard. Page 14 of 18

15 [23] Attach top front piece as you did the top and front. Page 15 of 18

16 [24] Attach back with 3/4" brad nails and wood glue. Page 16 of 18

17 [25] Hinge the top on with small hinges. clickforplans: [26] Source URL: h-register-diy-plans Links [1] y-plans [2] [3] Page 17 of 18

18 [4] [5] [6] 0.jpg [7] [8] [9] r.html [10] [11] -holidays [12] [13] [14] [15] [16] [17] [18] [19] [20] ster%20toy%20diy%20plans%20step%201.jpg [21] ster%20toy%20diy%20plans%20step%202.jpg [22] ster%20toy%20diy%20plans%20step%203.jpg [23] ster%20toy%20diy%20plans%20step%204.jpg [24] ster%20toy%20diy%20plans%20step%205.jpg [25] ster%20toy%20diy%20plans%20step%206.jpg [26] Page 18 of 18