2x4 Hall Tree Published on Ana White ( 2x4 Hall Tree [1] Submitted by Ana White [2] on Sun, :51.

Transcription

1 [1] Submitted by Ana White [2] on Sun, :51 Page 1 of 19

2 [1] Additional Photos [3] Page 2 of 19

3 [4] [5] This free furniture plan is sponsored by Varathane. All opinions expressed are my own. Every entryway should have a bench and hooks. For about $20 in lumber, you can build this rustic hall tree. Page 3 of 19

4 It's sturdy and stylish, with lots of functionality and plenty of hooks. It's a welcoming piece, providing a comfortable place to sit to take shoes or boots off, while offering to hold coats, bags and more. Page 4 of 19

5 There's even smaller hooks perfect for keys, sunglasses, wallets and more. 2x4s rarely disappoint - they are inexpensive, beautiful and sturdy. The perfect stain can further bring out their awesomeness. Page 5 of 19

6 Varathane just came out with a new stain color "Carbon Gray" [6] - it is a rich, dark gray, that goes on blotch free and even, while still showing off the natural wood grains. Gorgeousness in a can! The free plans for this 2x4 hall tree follow - enjoy and please share if you build! XO Ana PS - Thanks for pinning and sharing! Page 6 of 19

7 Page 7 of 19

8 Page 8 of 19

9 Summary: Free plans for 2x4 hall tree - modern farmhouse style. Plans by ANA-WHITE.com CategoriesProject Type: Lockers [7] Bench [8] Room: entry way [9] Outdoor [10] Skill Level: Intermediate [11] Dimensions: Dimensions shown above Page 9 of 19

10 8 feet long 8 feet long /4" self tapping wood screws (for attaching seat boards to frame and top to frame) /2" pocket hole screws 6 - coat hooks Page 10 of 19

11 Cup hooks (I used 11) optional for keys, sunglasses etc Tools: [12] Page 11 of 19

12 [13] [14] [15] Cut List: 72" - Back Legs 16-1/2" - Front Legs 14" - Side Aprons 44" - Front Apron, Back Supports, Back Seat Board 22-5/8" - Both ends cut at 45 degrees, long point to long point measurement, ends perpendicular - Cross Supports 18" - Center Seat Support 48" - Seat, Top Page 12 of 19

13 [16] Drill two 1-1/2" pocket holes on each end of the side apron boards. Attach side aprons to front and back legs. Repeat, but in mirror, for second leg set - keeping in mind that pocket holes should be hidden on inside of bench. Use glue and 2-1/2" pocket holes for attaching. Page 13 of 19

14 Page 14 of 19

15 [17] Drill two 1-1/2" pocket holes on each end of five of the 44" long 2x4s. Attach with pocket holes facing backwards to the legs with glue and 2-1/2" pocket hole screws. Page 15 of 19

16 [18] Drill two 1-1/2" pocket holes on each end of the 45 degree cross support and center seat support. Attach to bench with 2-1/2" pocket hole screws and wood glue. Page 16 of 19

17 [19] Attach seat boards and top with self tapping 2-3/4" wood screws and glue. Page 17 of 19

18 [20] Apply finish. Attach hooks to hall tree. clickforplans: [21] Source URL: Links [1] [2] [3] 20diy%20plans03.jpg [4] 20diy%20plans02_0.jpg Step 5 [5] 20diy%20plans01.jpg [6] hane/varathane-fast-dry-wood-stain Page 18 of 19

19 [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] ree%20bench%202x4%20step%201.png [17] ree%20bench%202x4%20step%202.png [18] ree%20bench%202x4%20step%203.png [19] ree%20bench%202x4%20step%204.png [20] %20diy%20plans03_0.jpg [21] Page 19 of 19