DIY Corner Bench with Built-in Table
|
|
- Karen Lane
- 5 years ago
- Views:
Transcription
1 DIY Corner Bench with Built-in Table Free woodworking plans for building a corner bench with a built-in table in the center. Cost: ~$75 Difficulty: Intermediate PINSPIRATION MOMMY 1
2 TOOLS AND SUPPLIES: Miter Saw 2 1/2 exterior pocket hole screws Drill/Driver Kreg Jig Wood Glue Pine Pocket Hole Plugs 2 1/2 exterior wood screws Countersink Bits Dark Walnut Stain Rustoleum Heirloom White paint Exterior Spar Urethane White primer WOOD LIST: Quantity Board Length 2 2 X X X 2 6 CUT LIST: Section Quantity Board Cut to Size/Length: Frame 2 2 x 4 40 Frame 2 2 x /4 with one end of each board mitered to 45 o Frame 6 2 x 4 12 ¼ Bench seat top 6 2 x 4 26 ½ Legs 9 2 x 4 16 Table top 4 2 x 4 15 Table top 4 2 x 4 8 Table box trim 4 2 x 4 4 PINSPIRATION MOMMY 2
3 Table top 1 2 x 4 1 ¼ x 1 ¼ Bench seat top 2 2 x 6 26 ½ Table box 2 2 x 6 15 ¼ with one end of each board mitered to 45 o Table box 2 2 x 6 13 ¾ with one end of each board mitered to 45 o Table Box 2 2 x 6 12 ¼ Table top 4 2 x 2 16 DIY Corner Bench with Built-in Table Instructions 1. Build the frame for the bench. Cut the following boards: with one end of each mitered to a 45 degree angle /4 with one end of each mitered to a 45 degree angle /4 2. Drill two pocket holes into the ends of each 12 1/4 board. 3. Use wood glue and 2 1/2 pocket hole screws and 2 1/2 exterior wood screws to assemble the frame using the diagram below: PINSPIRATION MOMMY 3
4 4. Cut the legs for the bench. Cut nine 2x4s at 16 each. 5. Use wood glue and 2 1/2 exterior wood screws to attach the legs to the inside of the frame (predrill holes with countersink bit to prevent wood from cracking). PINSPIRATION MOMMY 4
5 6. Build the box for the corner table. Cut the following pieces of wood: /4 with one end of each mitered to 45 degree angle /4 with one end of each mitered to a 45 degree angle /4 7. Drill two pocket holes into each end of the two 15 1/4 boards. PINSPIRATION MOMMY 5
6 8. Drill two 1 ½ pocket holes into one side of each of the four boards that assemble to form the box. 9. Use 2 1/2 pocket hole screws and wood glue to attach the four boards that make up the box (make sure the pocket holes in the side of each board are facing in the same direction (these will be used to attach the box to the frame). 10. Use wood glue and 2 1/2 pocket hole screws to attach the table box to the boards making up the corner of the frame. PINSPIRATION MOMMY 6
7 11. Drill two 1 1/4 pocket holes into the ends of each of the two 12 1/4 2 6 boards you cut. 12. Flip the bench upside down, and use wood glue and 2 1/2 pocket hole screws to attach these boards to the inside top of the table box. 13. Sand the bench and then primer and paint it with exterior white paint. PINSPIRATION MOMMY 7
8 14. Cut the boards to make the top of the bench seats: / /2 15. Drill three pocket holes into one side of each 2 6 board, and into one side of all but 2 of the 2 4 boards. 16. Use wood glue and 2 1/2 pocket hole screws to attach three 2x4s and one 2 6 together to make two bench seats. 17. Cut the boards for the table top: with each end mitered to a 45 degree angle with each end mitered to a 45 degree angle /4 x 1 1/ with each end cut at a 45 degree angle PINSPIRATION MOMMY 8
9 18. Drill 1 ¼ pocket holes into one side of all boards except the 1 1/4 x 1 1/4 board. 19. Use wood glue and 2 1/2 pocket hole screws to attach the boards into the following pattern (the 1 1/4 x 1 1/4 board can be glued into the center once the other boards are assembled. 20. Sand the two bench tops and the table top. 21. Stain them with Minwax Dark Walnut stain. PINSPIRATION MOMMY 9
10 22. Use wood glue and 2 1/2 exterior wood screws to attach the bench tops to the frame (predrill holes first). 23. Attach the table top with wood glue and 2 1/2 exterior wood screws from underneath the table box (drill through the 2 6 boards at the top of the table frame into the bottom of the table top). 24. Cut the trim pieces: cut four 2 4 boards at 4 each. 25. Sand and stain them dark walnut. 26. Use wood glue to attach them to the front and back of the two front facing boards supporting the table top (between the bench seat and the bottom of the table top). 27. Fill all holes with wood filler and let dry completely. 28. Lightly sand the filled holes on the top of the benches and then touch up the stain. 29. Apply 3 coats of exterior polyurethane varnish in satin finish. PINSPIRATION MOMMY 10
11 Have questions about these plans? Send me an at PINSPIRATION MOMMY 11
How to Build a DIY Extra Long Wood Bench
How to Build a DIY Extra Long Wood Bench Free woodworking plans for building a large, extra-long wood bench. This bench measures 9 in length and is designed to match the DIY Large Outdoor Dining Table,
More informationDIY Bedroom Entertainment Center
DIY Bedroom Entertainment Center Free woodworking plans for building a bedroom entertainment center that also serves as a laundry sorter. Perfect for bedroom with limited wall space. Cost: ~$250 Difficulty:
More informationDIY X Panel Side Table
DIY X Panel Side Table *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using power tools
More informationChief s Shop: Simple Woodworking Bench
Chief s Shop: Simple Woodworking Bench Be sure to read the instructions and review the illustrations and accompanying video for this project BEFORE you start. Follow ALL SAFETY GUIDELINES AND RECOMMENDATIONS
More informationPatio Table. Page 1 of 16
Patio Table www.andrewharriswoodwork.com Page 1 of 16 Introduction This plan makes a table that is unit which is 95 ½ inches long and 49 inches wide. The distance from the underside of the top edging to
More informationMATERIALS: TOOLS: CUT LIST:
MATERIALS: (3) 4x4x8 Ft. Boards (8) 2x4x8 Ft. Boards 2 ½-inch Pocket Screws 2 ½-inch Wood Screws 1-inch Wood Screws (16) Figure 8 Tabletop Fasteners Wood Glue Wood Filler TOOLS: Tape Measure Pencil Carpenter
More informationPROJECT PLANS HOBBY BENCH
PROJECT PLANS HOBBY BENCH This great-looking bench provides the perfect place to pursue a variety of hobbies. It offers a large bench top with built-in trays for small items, plus shelves up above to hold
More informationMyOutdoorPlans.com. By Julian King [2X4 GARDEN BENCH]
MyOutdoorPlans.com By Julian King [2X4 GARDEN BENCH] CUT LIST A 2 pieces of 2 4 lumber 24 long, 2 pieces 32 1/2 long LEGS B 2 pieces of 2 4 lumber 45 long, 2 pieces 15 1/2 long, 1 piece 12 1/2 long SEAT
More informationDIY Outdoor Console Table Addicted2DIY.com
DIY Outdoor Console Table Addicted2DIY.com *Before beginning this project, please read through all of the plans. Always use safety precautions whenever using power tools and follow the manufacturer s suggested
More informationDIY Farmhouse Cabinet
DIY Farmhouse Cabinet Addicted2DIY.com *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever
More informationJewelry Cabinet. Materials: 5/8" brad nails 5-1" x 3" x 8' boards (or if not 2 1/2" wide. 1-4' x 8' sheet - 3/4" plywood. wood glue get 1x4's)
1 Jewelry Cabinet Materials: 1-4' x 8' sheet - 3/4" plywood 5/8" brad nails 5-1" x 3" x 8' boards (or if not 2 1/2" wide wood glue get 1x4's) sand paper 1-1" x 6" x 8' board wood filler 1/2 sheet - 3/16"
More information1 ¼-inch Pocket Screws Brad Nailer or Hammer 1 ¼-inch Brad Nails Clamps
MATERIALS: TOOLS: (4) 2 x 6 x 8 Ft. Boards Tape Measure (2) 2 x 4 x 8 Ft. Boards Carpenter s Square (7) 1 x 4 x 8 Ft. Boards Pencil (2) 1 x 3 x 8 Ft. Boards Drill (1) Half Sheet of ¾-inch Thick Plywood
More informationEco Office File Base. Materials and Tools: Free Plans to build an office file cabinet base
Materials and Tools: Materials: 1 - Sheet 3/4 PureBond Hardwood Plywood (Available at the Home Depot) 1 - Sheet 1/4 PureBond Hardwood Plywood (Available at the Home Depot) 3-21 Drawer Slides, Euro Style
More informationDIY Wine Storage Cabinet
DIY Wine Storage Cabinet ADDICTED2DIY.COM *Before beginning this project, please read through all of the plans and the blog post. When building this project, be sure to measure your wood and cut to fit.
More informationSimple Woodworking: Outdoor Pitch Chair
Parts Lumber Front Front Leg Front Leg Drill three pocket holes on each end of the Front - one centered and two 3/4" from each side. Cut a 15-degree miter on one end of the Front Legs. It will be easier
More informationPROJECT PLANS PATIO PLANTER BOX
PROJECT PLNS PTIO PLNTER BOX This great-looking planter makes the perfect place for your favorite plants and flowers. It s sized to hold an 18" round plastic pot, which you can pick up in any garden center.
More informationKreg Tool Co. All Rights Reserved.
Version 1 p. 1 Materials: Lumber: Qty: Board 2 2x2s 3 ft. long 2 1x2s 8 ft. long 2 1x3s 8 ft. long 6 1x6s 10 ft. long INSTRUCTIONS: Supplies: 1 1 / 4" Kreg Screws (coarse thread for softwoods, fine thread
More informationEasy Five Cube Tower Bookshelf. Copyrighted Material. Page 1
Compare to: Land of Nod Cube Collection, 5 Cube Tower Bookshelf Skill Level: Beginner Easy Five Cube Tower Bookshelf This fully framed five cube tower can hold everything from towels to boots to books
More informationADULT. Adirondack / Muskoka Chair Plans
ADULT Adirondack / Muskoka Chair Plans Materials List 3/4" x 9 1/2" (1.9cm x 24.1cm) redwood, cedar or pine boards. Six, 8' (2.44m) boards should make one chair depending on knots and layout. You can also
More informationBrookfield Storage Bed Frame. Copyrighted Material. Page 1
Compare to: Pottery Barn Kids Brookfield Storage Bed Frame Skill Level: Intermediate Brookfield Storage Bed Frame Matching the Brookstone Headboard, the storage bed takes advantage of ALL the space under
More informationTryde Media Hutch. Copyrighted Material. Page 1
Compare to: Pottery Barn Hyde Media Console Skill Level: Intermediate Tryde Media Hutch Following the great success of so many readers with the Tryde Collection, inspired by Pottery Barn s popular Hyde
More informationDIY PATIO TABLE WITH BUILT-IN ICE BOXES
DIY PATIO TABLE WITH BUILT-IN ICE BOXES courtesy of Remodelaholic.com Designed by Kruse s Workshop // Building Plans by Hertoolbelt.com Find the original tutorial and more details at www.remodelaholic.com/build-patio-table-ice-boxes
More informationHarriet Chair with Modifications
Harriet Chair with Modifications This modification of the Harriet chair includes a slat back, padded seat, and is 2 inches wider than the original plan. The overall dimensions of the finished chair: 38
More informationBecca Trunk Published on Ana White ( Becca Trunk [1] Submitted by Ana White [2] on Wed, :09.
[1] Submitted by Ana White [2] on Wed, 2013-04-10 12:09 Page 1 of 12 Page 2 of 12 [1] Additional Photos [3] [4] Hello DIY Friends! Look what you can make with a 1/2 sheet of plywood! Page 3 of 12 Page
More informationining Table Materials *Notes on Materials
D ining Table We looked around for the perfect table for the dining room. Some were too big, some too small, and most were just too expensive. So we built this one, and we are happy with the result. It
More informationPLANS BY KELLEY FARMHOUSE DESIGNS LOFTED DORM ROOM BED
PLANS BY KELLEY FARMHOUSE DESIGNS LOFTED DORM ROOM BED DIMENSIONS: 82" X 70" X 45" DIFFICULTY LEVEL: INTERMEDIATE TOOLS REQUIRED ONE+ Circular Saw ONE+ AirStrike 16GA Finish Nailer ONE+ Impact Driver ONE+
More informationIndustrial Cart. Materials. With High Style Restyle
1 Industrial Cart With High Style Restyle Materials 1 sheet 3/4" plywood 1-1" x 2" x 8' board 2-1" x 3" x 8' board 1-2" x 8" x 10' board 1-2" x 6" x 8' board 3-1/4" x 2 1/2" x 4' poplar hobby boards, or
More informationModern Park Bench [1]
[1] Submitted by Ana White [2] on Mon, 2014-06-02 13:07 [1] Additional Photos [3] [4] Page 1 of 20 [5] [6] One of the great things about DIY - besides saving money, getting what you want, and that you
More informationMATERIALS: TOOLS: CUT LIST:
MATERIALS: TOOLS: (2) 2x2x8 Ft. Boards Tape Measure (2) 1x4x8 Ft. Boards Pencil (4) 1x2x8 Ft. Boards Carpenter s Square (1) 4x4 Ft. Sheet of ¾-Inch Plywood Drill with 5/16-inch Drill Bit (1) 1 ½-inch Thick
More informationBeginner Farm Table (2 Tools + $50 Lumber) [1]
[1] Submitted by Ana White [2] on Mon, 2018-06-25 02:16 Page 1 of 36 [1] Additional Photos [3] [4] Page 2 of 36 [5] [6] I have been a long time user and fan of Rustoleum products. This post is sponsored
More informationCastle Bed. Page 1 of 24
Castle Bed www.andrewharriswoodwork.com Page 1 of 24 Introduction This plan makes a twin bed that is 91 inches long and 60 inches wide. I have tried to ensure all steps are covered in these plans but if
More informationSimple White Outdoor Loveseat [1]
[1] Submitted by Ana White [2] on Thu, 2011-06-09 03:05 [1] Some comments from our lovely readers on the matching sofa plan [3]... "Will you be doing the love seat? (Pretty please!)" "Would it be so hard
More information4x4 Truss Benches [1]
[1] Submitted by Ana White [2] on Wed, 2013-10-02 12:37 Page 1 of 14 Page 2 of 14 [1] Additional Photos [3] [4] Hi everyone! I'm so excited today to share with you brand new plans! Remember a little while
More informationHow to Build a Recessed Medicine Cabinet
How to Build a Recessed Medicine Cabinet See post for install info http://www.hertoolbelt.com/recessed-medicine-cabinet/ Materials 6 Inset Cabinet Door Hinges 3 Latches 1 sheet Beadboard or 1/4 plywood
More informationRustic X Coffee Table [1]
[1] Submitted by Ana White [2] on Mon, 2012-07-09 12:40 [1] Additional Photos [3] [4] Page 1 of 12 [5] [6] [7] Hey hey! Happy Monday! Thanks so much with your patience with the site this morning. We are
More informationMudroom Unit. Page 1 of 25
Mudroom Unit www.andrewharriswoodwork.com Page 1 of 25 Introduction This plan makes a unit which is 66 ¾ inches tall, 39 ½ inches wide and 18 ½ inches deep. It was custom made for some friends to fit the
More informationChest of Drawers Plans
Chest of Drawers Plans www.andrewharriswoodwork.com Page 1 of 15 Introduction This plan makes a chest of drawers that is 50 inches at the widest point, 19 inches deep and 40.75 inches high. I have tried
More informationModern Coffee Table [1]
[1] Submitted by jleakey [2] on Thu, 2013-12-26 10:03 Page 1 of 15 [1] Page 2 of 15 Additional Photos [3] [4] [5] [6] To build this project I used various tools. These included a Table Saw for all rip
More informationindicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
What You'll Need lumber 1-1 x3x4 1-1 x3x8 2-1 x6x8 1-1 x 10 x 4 hardware/supplies (availability will vary) 2" wood screws 1 1/4" pocket hole screws wood glue paint/stain tools table saw miter saw jigsaw
More informationShanty2Chic Porch Swing [1]
[1] Submitted by Ana White [2] on Wed, 2013-06-12 12:48 Page 1 of 18 Page 2 of 18 [1] Additional Photos [3] Are you enjoying your summer? Would you enjoy your summer more if you could swing lazily in the
More informationThis indicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
S i m p le Woodworking: Bath Side Table What You'll Need v lumber 4-1- x 36-inch square dowels 1-1 x8x8 1-3/4-inch x 2- x 4-foot sheet of plywood hardware/supplies 1 1/4" pocket hole screws #18 x 1 1/2
More informationSaving Alaska Farmhouse Canopy Bed [1]
[1] Submitted by Ana White [2] on Fri, 2014-07-11 14:14 [1] Happy Friday DIY Friends! I have some great news to share with you today! Page 1 of 20 DIY Network will be airing our Saving Alaska pilots this
More informationFull Storage (Captains) Bed [1]
[1] Submitted by Ana White [2] on Wed, 2010-05-19 22:54 [1] Page 1 of 11 JUST A BOOKCASE... or three This one is an easy one. Just think of it as you are making little bookshelves... now that I think about
More informationPLANS BY TOM BURY JOB BUDDY TOTAL DIMENSIONS: 44 X 18 X 14 DIFFICULTY LEVEL: INTERMEDIATE
JOB BUDDY TOTAL DIMENSIONS: 44 X 18 X 14 DIFFICULTY LEVEL: INTERMEDIATE MATERIAL LIST: (5) 1 x4 x8 (2) 1 x4 x6 (1) 48 x48 3/4 plywood (1) 24 x24 metal mesh (1) 2 x 8 angle iron (1) 3 x 24 flat iron bar
More informationPROJECT PLANS EXPANDABLE CRAFT CENTER
R PROJECT PLANS EXPANDABLE CRAFT CENTER Whether you re working on craft projects, sewing, or pursuing another hobby, this craft center offers a great place to work. It features a large work surface that
More informationThis indicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
S i m p le Woodworking: What You'll Need v lumber 2-1 x 12 x 6 hardware/supplies (availability will vary) 1 1/4" pocket hole screws #18 x 1 1/2 brads or pocket hole plugs 12-inch continuous hinge magnetic
More informationSimple Stackable Outdoor Chairs
posted by Ana White [1] These simple chairs stack! And match our Simple Modern Outdoor Collection. Build a few to match the tables, or just extra seating for outdoors. About ProjectInspired By: West Elm
More informationDresser. Materials & Tools FEATURING FORMALDEHYDE-FREE TECHNOLOGY. Free Plans to build a Dresser
Free Plans to build a Dresser Materials & Tools Materials: 1-1/4 pocket hole screws 1-1/4 brad nails 3 sets of 18 drawer slides Drawer pulls Edge banding, optional Wood glue Sandpaper (100, 150, 220 grits)
More informationPROJECT PLAN MODERN COFFEE TABLE
BUILD IT WITH ROCKLER PROJECT PLAN MODERN COFFEE TABLE With its clean lines and striking geometry, this coffee table will lend iconic midcentury modern style to any living space. And you can build it yourself
More informationEntryway Locker 17 ½ 25 ½
Copyright 2015 Shanty-2-Chic.com T Entryway Locker his old world entryway locker is loaded with possibilities. Two adjustable shelves allow you to customize the storage to fit your needs. Even better,
More informationCloset Organizer from One Sheet of Plywood [1]
[1] Submitted by Ana White [2] on Mon, 2013-03-25 11:42 [1] This closet is made from one sheet of plywood! Page 1 of 14 Wondering how to make a closet organizer system from one sheet of plywood? Check
More informationChest of Drawers Plans
Chest of Drawers Plans www.andrewharriswoodwork.com Page 1 of 12 Introduction This plan makes a chest of drawers from 2 by 4s and 2 by 6s for the top. The cabinet is 22 ½ inches at the widest point, 22
More informationdiy outdoor bar from diyhuntress.com
diy outdoor bar from diyhuntress.com 2 DIMENSIONS & DISCLAIMER: Please double check the overall dimensions for your specific build before starting. Please wear appropriate safety gear when operating power
More informationPorch. Swing. Build A. farmstead: project
farmstead: project Porch Build A Swing Instructions Cut all parts to fit as you assemble the project and use the Parts List and Cutting Diagram as a guide for dimensions. When gluing pieces together, you
More informationCopyright 2010 Springbok Publishing All Rights Reserved- Page 1
Copyright 2010 Springbok Publishing All Rights Reserved- www.woodensaddlerackplans.com Page 1 Legal Information All contents copyright 2010 by Springbok Publishing. All rights reserved. No part of this
More informationindicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
f a r m h o u s e d i ni ng b e nc h What You'll Need lumber 6-2x3x8 6-1 x6x8 (availability will vary) Intermediate or equivalent 8/4 lumber planed to 1 1/2" for the 2x hardware/supplies 1 1/4" pocket
More informationTools and materials. Order of work. Prepare a flat pack as follows:
DIY Badge Activity Pack What s included in this How To s pack: Making a mug tree...2 Making a magazine storage box... Making a key holder...4 Making a bird apple feeder...5 Making a set of dominoes...6
More informationindicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
ho m e o f f i c e de s k What You'll Need lumber 1-1 x2x4 4-1 x2x8 8-1 x3x8 1-3/4 x 4 x 8 sheet of plywood hardware/supplies (availability will vary) 1 1/4" brads Kreg 1 1/4" pocket hole screws wood glue
More informationRustic X End Table [1]
Rustic X End Table [1] Submitted by Ana White [2] on Wed, 2012-08-15 02:03 [1] Hi everyone!!! What a treat we have today! Page 1 of 16 Remember this beautiful X Console Table, [3] built by Hillary? [4]
More informationindicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
What You'll Need lumber 1-1 x 3 x 6 2-1 x3x8 1-1 x8x6 1-1 x 12 x 6 2-2 x 2 x 8* (availability will vary) *if2x2s ofthis size are not available, laminated two 1x2s to create 2x2s) hardware/supplies Kreg
More informationShoe Organizer Plans Our Home from Scratch
Shoe Organizer Plans by Our Home from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, injury or death
More informationBenchright Farmhouse Table [1]
[1] Submitted by Ana White [2] on Wed, 2011-07-20 13:24 Page 1 of 24 [1] While I know it's still July, and summer for most everyone else, yesterday, while helping out at the Momplex [3], I found myself
More informationMedia Console Table 38"
Copyright 2016 Shanty-2-Chic.com Media Console Table A sleek, modern take on a traditional concept; this console table is as stylish as it is functional and you'll have it done in a weekend. And versatile
More informationTriple Pedestal Farmhouse Table [1]
[1] Submitted by Ana White [2] on Fri, 2012-11-30 13:42 Page 1 of 24 Page 2 of 24 [1] Additional Photos [3] [4] [5] [6] [7] One hundred and twenty five dollars. Page 3 of 24 $125. That's what this table
More informationPROJECT PLANS ROLLING LAUNDRY SORTER
R PROJECT PLANS ROLLING LAUNDRY SORTER Sorting laundry certainly doesn t rank high on anyone s list. So, anything that makes this task easier is welcome. If that functionality can be mixed with a bit of
More informationCopyrighted Material Page 1
Compare to: Pottery Barn Teen Storage Bed System Skill Level: Beginner Working with the rest of the components in the Storage Bed Collection, the Small Hutch fits on top of the Storage Headboard and will
More informationHere are the tools and materials we used for the project:
When we began our kitchen remodel, we knew we were going to have to do something about the trash can-- our old one was stained and dented and just had to go. While we would have loved to have had room
More informationPatrol Box Plans by David J. Yarusso Troop 609
Patrol Box Plans by David J. Yarusso Troop 609 Materials List: 1. One 4 x8 sheet of ½ thick cabinet grade (birch or oak) or AC plywood. If using AC grade, use the A grade surface on the outside for a clean
More informationKitchen Upper Cabinet: Single Door Cabinets from Scratch
Kitchen Upper Cabinet: Single Door by Cabinets from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage, disappointment,
More informationTryde End Table with Shelf - Updated Pocket Hole Plans [1]
[1] Submitted by Ana White [2] on Tue, 2013-10-15 14:17 [1] Hi everyone! We are still chugging away at Momplex Unit Sewing Mom... so so so close! Page 1 of 13 But not quite there yet... And while I've
More informationWant to reach a captive woodworking and crafting audience?
Want to reach a captive woodworking and crafting audience? Then be a sponsor of Chief's Shop Plan of the Week Contact Chris Hill for more details chief@chiefs-shop.com 205-432-801 3 S i m p le Woodworking:
More informationMaterials and Tools: Printer s Triple Console Cabinet. Free Plans to build a Triple Console Cabinet
Materials and Tools: Materials: 3 sets euro style bottom corner mount drawer slides, 16 length 3 sets inset hinges 24 cup style handles 8 2x2 @ 8 feet long 6 1x3 @ 8 feet long 6 1x2 @ 8 feet long 1 sheet
More informationMimi's Hall Tree Hutch [1]
[] Submitted by Ana White [2] on Mon, 202-02-06 3:38 [] I am so glad you all liked Mimi's Hall Tree. [3] On Friday, I put together plans for the bench shown at the base of this hall tree. Page of 20 Bench
More informationReclaimed Wood Look Bedside Table [1]
[1] Submitted by Ana White [2] on Thu, 2011-06-23 12:27 Page 1 of 18 [1] Additional Photos Page 2 of 18 [3] Featured photo by brick [4] This rustic three drawer nightstand is easy to build with off the
More informationHudson Dresser [1] Hudson Dresser Published on Ana White ( Submitted by dan-k [2] on Fri, :43 [1]
[1] Submitted by dan-k [2] on Fri, 2011-03-11 11:43 [1] If you plan on staining this piece, it is recommended that you stain all of the drawer face materials before assembly for a more professional look.
More informationDining Cart [1] Dining Cart Published on Ana White ( Submitted by decorandthedog [2] on Sun, :53.
[1] Submitted by decorandthedog [2] on Sun, 2014-03-16 17:53 [1] Summary: Page 1 of 13 Rustic, yet industrial dining cart, see more about the project at http://decorandthedog.net/decorandthedog/2014/1/19/diy-dining-cart-tu
More informationComputer Desk. Project designed by April Wilkerson
Project designed by April Wilkerson Copyright WilkerDos.com 2018 Project plan Desk Page 2 of 16 Page 3 of 16 File cabinet Page 4 of 16 Metal base Page 5 of 16 Glue up Get started by gluing up boards for
More informationHusky Farmhouse Table [1]
[1] Submitted by Ana White [2] on Mon, 2013-05-06 12:49 [1] Additional Photos Page 1 of 18 [3] [4] [5] [6] Hello DIY Friends! I hope you had a wonderful weekend! Can you believe it is still snowing up
More informationDIY Rustic Dresser Addicted2DIY.com
DIY Rustic Dresser Addicted2DIY.com *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using
More informationCedar Planters for less than $20! [1]
[1] Submitted by Ana White [2] on Wed, 2012-08-08 12:20 [1] I've been wanting a few cedar planters for the front of my house, and had some leftover cedar fence pickets to use up. This was a quick and Page
More informationPROJECT PLANS BATHROOM WALL SHELF
R PROJECT PLANS BATHROOM WALL SHELF Just about everybody needs more bathroom storage space, but it s one of the most-challenging rooms in the house to fit another item into. This wallmounted shelf makes
More informationHappier Homemaker Farmhouse Table [1]
[1] Submitted by Ana White [2] on Tue, 2013-04-23 11:55 [1] Additional Photos [3] Hey DIY Friends! We have a special plan treat for you today!!! Page 1 of 17 My new friend Melissa from The Happier Homemaker
More informationArmoire with Open Shelves and Magnetic Doors [1]
[1] Submitted by Ana White [2] on Mon, 2011-08-22 18:48 Page 1 of 25 [1] Page 2 of 25 Additional Photos [3] [4] Necessity truly is the mother of invention. Last Sunday, I was counting on my scrap piece
More informationKitchen Upper Cabinet: Double Doors Cabinets from Scratch
Kitchen Upper Cabinet: Double Doors by Cabinets from Scratch Our Home from Scratch LLC Page 1 Disclaimer Our Home from Scratch LLC and its legal owners cannot be held responsible for any loss, damage,
More informationBrandy Scrap Wood Storage Bed with Drawers - KING [1]
[1] Submitted by Ana White [2] on Mon, 2015-03-23 11:28 Page 1 of 20 [1] Additional Photos [3] Page 2 of 20 [4] [5] There's only eight days left to share your scrap wood project for a chance to win over
More informationTrestle Table and Benches Materials List
Project 18444EZ: Trestle Table and Benches In the early days of our country, trestle tables were popular because they could easily be disassembled and moved out of the way when not in use no small advantage
More informationFarmhouse Bench [1] Farmhouse Bench Published on Ana White (http://www.ana-white.com) Submitted by Ana White [2] on Wed, :31
[1] Submitted by Ana White [2] on Wed, 2011-01-05 01:31 [1] Summary: To match our Farmhouse Table. This farmhouse bench is easy to build and is rustic and substantial. CategoriesProject Type: Bench [3]
More informationRoll-Away Patio Chair
oll-way Patio hair Project Plan FO YOU STT This project, designed for the Kreg Jig H and Kreg Jig H Screws, uses 1 ½"-thick material, commonly called 2- by lumber. We recommend cedar for outdoor projects,
More informationCastle loft bed [1] Additional Photos. Castle loft bed Published on Ana White (http://www.ana-white.com)
[1] Submitted by fsmumford [2] on Tue, 2011-10-18 21:51 [1] Additional Photos [3] [4] Page 1 of 31 [5] [6] [7] Summary: I stumbled upon Ana s blog about a year ago. Since, like many of you, I have become
More informationHow to Build a Simple Corner Trellis
How to Build a Simple Corner Trellis This simple corner trellis does double duty as both a sturdy support for your plants and a beautiful edible landscaping element in your yard. Use it to grow cucumbers,
More informationOUTDOOR STOOL. ProWood Project Plan
ProWood Project Plan OUTDOOR STOOL With ProWood Professional Grade pressure-treated wood, you can easily build this sturdy stool and complement your outdoor deck, patio or yard furniture and expand your
More informationBenchright Round End Tables [1]
[1] Submitted by Ana White [2] on Tue, 2012-05-01 10:34 Page 1 of 15 Page 2 of 15 [1] Additional Photos [3] I've been wanting to share these plans with you for quite some time now! I loved the style of
More informationindicates a diagram detailing the dimensions of a project part and/or the placement for pocket holes, screws, nails, etc.
p a r t o ne : B a s e What You'll Need lumber 2-2x4x8 4-2x6x8 1-3/4-inch x 4- x 8-foot sheet of plywood hardware/supplies (availability will vary) 2 1/2" pocket hole screws 1 1/4" pocket hole screws 1
More informationChestwick Platform Bed - Queen Size [1]
[1] Submitted by Ana White [2] on Wed, 2012-03-21 22:33 [1] Additional Photos [3] [4] Page 1 of 18 [5] [6] Well, it's been a little while since we've had an adult bed posted, so I'm delighted to share
More informationPROJECT PLANS WOODEN GIFT BOX
PROJECT PLANS WOODEN GIFT BOX Make the gifts you give even more special by presenting them in this one-of-a-kind gift box. In fact, the box may be valued more than whatever it contains. The box is sized
More informationGrilling Table. Page 1 of 10
Grilling Table www.andrewharriswoodwork.com Page 1 of 10 Introduction This plan makes a table 47 inches wide, 22 inches deep and 36 inches high with the top added. All my builds are made with pocket hole
More informationPatrick's Beach Cottage Dresser [1]
[1] Submitted by Ana White [2] on Fri, 2011-05-27 12:23 [1] Additional Photos Page 1 of 17 [3] Special thanks to Patrick for sharing his dresser with us. After so many of you requested plans, I'm so very
More informationProject 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
More informationDIY RUSTIC HALL TREE
DIY RUSTIC HALL TREE *Before beginning this project, please read through all of the plans as well as the blog post associated with this project. Always use safety precautions whenever using power tools
More informationPROJECT PLANS OUTDOOR SERVING CART
R PROJECT PLANS OUTDOOR SERVING CART Make outdoor entertaining easy with this serving cart. It offers lots of space for storing food, tableware, and outdoor supplies, plus it cradles bottles where they
More information