PROGRAM: CIP CODE: DEPARTMENT: DIVISION: PROGRAM COORDINATOR: MISSION STATEMENT:
|
|
- Mark Elliott
- 5 years ago
- Views:
Transcription
1 ASSESSMENT MATRIX OF PROGRAM-LEVEL STUDENT LEARNING OUTCOMES PROGRAM: CIP CODE: DEPARTMENT: DIVISION: PROGRAM COORDINATOR: MISSION STATEMENT: INTEGRATED PRODUCTION TECHNOLOGIES PETROLEUM SERVICES PETROLEUM HERBERT MCCOY, DEPARTMENT HEAD AND TANDRA LEMAY, AVC OF WORKCE AND IPT The Integrated Production Technologies program provides specialized academic and technical skills to prepare students for a career as a production technician in the oil and gas production industry. 1. Apply fundamental concepts of DC/AC electricity and electronics. I the year of results, 88% of IPTN Applied I 2. Identify instrument symbols, will be included terminology, controllers, regulators, control
2 loops, and P&ID s within instrumentation drawings. I the year of expectations. The assessment tool, KSAs, results, 88% of will be used to modify the curriculum to address 2300 Applied I IPTN knowledge and skill deficiencies if the KSAs result in 25% or more students unsuccessfully meeting 3. Demonstrate understanding of pneumatic, electronic, digital, and mechanical controls and systems IPT 1600 Oil & 1610 Oil and I I 2100 the year of 1310 IPT 1600 Oil & results, 98% of
3 4. Understand the 1610 Oil and I I 2100 Deepwater Systems and Technology IPTN operation of electric, pneumatic, and hydraulic power and control system, used in production and pipeline operations IPT Production Safety Systems the year of 1310 IPT 2100 results, 81% of IPTN Production Safety Systems 5. Demonstrate understanding of computational methods and 1310 IPT
4 software used for vibration analysis, unit alignment, maintenance, troubleshooting, and repair of equipment and controls used in production and pipeline operations Oil & 1050 Petroleum Computational Methods 1610 Oil and I Production Safety Systems the year of 1310 IPT 1600 Oil & 1050 Petroleum Computational Methods 1610 Oil and I 2100 results 100% of IPTN Production Safety Systems 6. Demonstrate Faculty is not satisfied understanding of will not be with the results of this KSAs, will be utilized to offshore safety and available for SLO. Corrective actions assess compliance will be taken. understanding of this standards and regulations applicable to deepwater production and facilities Offshore Safety and Compliance Production Safety Systems No students were the year of SLO. The information collected will assist the instructors in determining if to modify the curriculum to address knowledge and skill deficiencies if the KSAs
5 result in 25% or more students unsuccessfully meeting expectations. 7. Demonstrate and apply concepts of deep-water exploration, production, and transportation of oil and gas IPT 1600 Oil & 1610 Oil and I 2100 the year of results, 100% of 1310 IPT 1600 Oil & 1610 Oil and I IPTN Deepwater Systems and Technology 8. Demonstrate and 1. Embedded Assessment Assessment tool is Enhanced efforts will be apply skills assessment tool for indicated with students data will be completed and is being made to capture students necessary to gain skill-specific activities scoring at least 70% available upon deployed in courses. placement information employment in the collection for and assist with integrated 89% of students Faculty is not satisfied placement. production technology industry Careers in the Petroleum Industry or exceeded expectations in Fall 2016 IPTN AY16-17 AAS Grads=37 (FA,SP) with Placement data is challenging as Faculty
6 2. Related-Employment Emp. Related=17 has to rely on students Placement Rate of 2. Related-Employment 19/37=51% to provide the Associate Placement information. Degree Graduates Baseline=58%
OSUIT ENERGY TECHNOLOGIES
OSUIT ENERGY TECHNOLOGIES FUELING THE FUTURE Pipeline Integrity Natural Gas Compression Instrumentation INGAA Foundation 2013 Annual Meeting OSUIT- Present In 1946, OSUIT was purchased from the military,
More informationBRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS
BRONX COMMUNITY COLLEGE DIVISION OF ACADEMIC AFFAIRS AUTOMOTIVE TECHNOLOGY PROGRAM ASSESSMENT PLANNING TEMPLATE May 15, 2009 Department/Program Physics and Technology Automotive Technology Program Department
More informationENGINEERING SHORT COURSES
www.forthvalley.ac.uk ENGINEERING SHORT COURSES 02 FORTH VALLEY COLLEGE Our mission is to Make Learning Work and our vision, shaping the future, developing a world class service! The College is based in
More informationComprehensive Program Review Report
Comprehensive Program Review Report Program Review - Welding Prepared by: Frank Tebeau & Randy Emery What are the strengths of your area?: 1) All courses within the welding department have up to date SLO's
More information1. Introduction: School of Interiors Planning/Strategy/Design 1.1 Unit Mission, Vision and Goals:
SCHOOL OF INTERIORS ASSESSMENT PLAN 2014-2020 1. Introduction: School of Interiors Planning/Strategy/Design 1.1 Unit Mission, Vision and Goals: The three-part mission of the School of Interiors is: 1)
More informationGlendale Community College Instructional Division Program Learning Outcomes Assessment Timeline
Glendale Community College Instructional ivision Program Learning Outcomes Assessment Timeline Please complete a separate timeline form for each program within your division ivision name: BUSINESS IVISION
More informationSJSU Annual Program Assessment Form Academic Year
SJSU Annual Program Assessment Form Academic Year 2016 2017 Department: Meteorology and Climate Science Program: MS in Meteorology College: Science Program Website: www.sjsu.edu/meteorology Link to Program
More informationSOLVING THE PROCESS TECHNOLOGIES SKILLS GAP IN TEXAS UPPER PANHANDLE INTRODUCTION AND PROBLEM DEFINITION SOLUTION
SOLVING THE PROCESS TECHNOLOGIES SKILLS GAP IN TEXAS UPPER PANHANDLE Companies in Texas upper panhandle are in dire need to fill a skills-gap and train employees in various disciplines, especially process
More informationDegree Requirements
4.2.12.2 Degree Requirements Programme Information The Master of Science (Offshore Technology) programme, or MSc (OT) in short, is jointly hosted by the Department of Civil and Environmental Engineering
More informationLecture 01 Course Introduction
Lecture 01 Course Introduction Shawn Kenny, Ph.D., P.Eng. Assistant Professor Faculty of Engineering and Applied Science Memorial University of Newfoundland spkenny@mun.ca Course Learning Objectives Students
More informationINDUSTRIAL TECHNOLOGY
INDUSTRIAL TECHNOLOGY INDUSTRIAL TECHNOLOGY COURSES CAN BE USED AS ELECTIVE CREDITS CONTENT MISSION STATEMENT: The content area of Industrial Technology education provides a foundation for all students
More informationCDN College EXPO Work Based Learning Policy into Practice.
CDN College EXPO 2018 Work Based Learning Policy into Practice http://online.anyflip.com/fmiw/itdd/mobile/index.html ESP a Strategic Approach Steering Group Theme Groups to Strategy Groups Appropriate
More informationWood Group Investor Briefing Q1 2016
Wood Group Investor Briefing Q1 2016 Our business Wood Group is an international projects, production and specialist technical solutions provider with around $6bn sales and 36,000 employees. We are focused
More informationODU Graduate Seminar 10/31/17 Sara Langford Product Manager- Industrial Automation and Software Specialist
ODU Graduate Seminar 10/31/17 Sara Langford Product Manager- Industrial Automation and Software Specialist Agenda Background EECO History and Company Culture Experiences Career Paths Core Focuses Questions
More informationEngineering and Design
End of Course (EOC) Bank Blueprints Engineering and Design Table of Contents Table of Contents... 1 About Test Blueprints... 2 Engineering Design... 3 Engineering Principles... 4 Manufacturing Operations...
More informationMechanical Engineering
Mechanical Engineering 1 Mechanical Engineering Degree Awarded Bachelor of Science in Mechanical Engineering Nature of Program Mechanical engineering is one of the largest technical professions with a
More informationCanadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Preamble Canadian Technology Accreditation Criteria (CTAC) MECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) These CTAC are applicable to programs having titles involving
More informationMission Statement: Department: Engineering Technology Department Assessment coordinator: Todd Morton
Department: Engineering Technology Department Assessment coordinator: Todd Morton Mission Statement: The principal mission of the Engineering Technology Department is to provide the highest quality education
More informationTracDat V.5: How To AY University of Hartford. Program Student-Learning Outcome Assessment
TracDat V.5: How To AY 2105-2016 University of Hartford Program Student-Learning Outcome Assessment The University of Hartford uses the software, TracDat V.5, for managing, tracking, and reporting on the
More informationDE059: Hydrocarbon Production Operations
DE059: Hydrocarbon Production Operations DE059 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This five-day course will provide the participants with an integrated view of the hydrocarbon
More informationProcess Operations: Oil and Gas Separation
National Unit specification: general information Unit code: FM3C 11 Superclass: YC Publication date: May 2011 Source: Scottish Qualifications Authority Version: 01 Summary This Unit is designed for candidates
More informationDuration : 1 Year Timing: Morning Batch : 9.30 AM to 1.00 PM or Afternoon Batch : 1.30 PM to 5.00 PM. 5 Months Timing: Full Time : 9.30 AM to 5.
1 Head Office: Main Road, Thalayolaparambu, Kottayam Dist., Kerala, India, PIN: 686 605 : 0489 236669, : 99617336611 / 12 / 13, e-mail : siit@siitonline.com, www.siitonline.com Eligibility : 10 th and
More informationEngineering and Electronics Technology
Engineering and Electronics Technology Degrees: AAS Engineering and Electronics Technology 60-68 Tracks: Electronics 62-64 Computer Maintenance 63-66 Apprenticeship 66-68 Mechanical 64-67 Industrial 66-68
More informationArticulation of Certification for Manufacturing
Paper ID #15889 Articulation of Certification for Manufacturing Dr. Ali Ahmad, Northwestern State University Ali Ahmad is the Head of the Engineering Technology Department at Northwestern State University
More informationAUTOMOTIVE TECHNICIAN Technical Diploma
AUTOMOTIVE TECHNICIAN Technical Diploma Program Code: 32-404-2 our graduates INDEMAND 2017/2018 mstc.edu automotive technician career pathway AUTOMOTIVE TECHNICIAN Mid-State s Automotive Technician program
More informationIntegrity Monitoring? New thinking in the approach to Subsea IMMR. Dr Karl Woods, Snr Subsea Reliability Engineer 22/2/2017
Integrity Monitoring? New thinking in the approach to Subsea IMMR Dr Karl Woods, Snr Subsea Reliability Engineer 22/2/2017 Disclaimer and important notice This presentation contains forward looking statements
More informationTable 2. Assessment Climate Survey Responses
Table 2. Assessment Climate Survey s Part IA: Norms -- Personal attitude toward assessement 1. Assessment should be the job of the administration, not the faculty. 31.% 9 34.5% 1 Neither nor 1.3% 3 2.
More informationWebsite:
SJSU Annual Program Assessment Form Academic Year 2013-2014 Department: Design Program: Interior Design College: Humanities and the Arts Website: http://www.sjsu.edu/design/design_programs/interior_design_program/
More informationPORT OF POOLE DEVELOPING FOR THE FUTURE
PORT OF POOLE DEVELOPING FOR THE FUTURE Nick Clarke & Kim Moore INTRODUCTION Masterplan the benefits EIA & SEA (Strategic Environmental ) Changes in Marine Licensing. PORT DEVELOPMENT PROCESS Development
More informationIndustrial Maintenance Technology (INT)
Technology 199 The College for Real Careers Technology (INT) Program Information The Technology Program at H. Councill Trenholm State Community College is a multi-craft curriculum. Many crafts are a part
More informationIndustrial Maintenance Mechanics
Measuring What Matters in Job Ready Assessment Blueprint Industrial Maintenance Mechanics Test Code: 2074 / Version: 01 Copyright 2007 General Assessment Information Industrial Maintenance Mechanics Blueprint
More informationRiser Lifecycle Monitoring System for Integrity Management
Riser Lifecycle Monitoring System for Integrity Management 11121-5402-01 Judith Guzzo GE Global Research RPSEA Ultra-Deepwater Technology Conference October 29-30, 2013 Lone Star College Conference Center
More informationEducational Courses 2016
Educational Courses 2016 Course 1106 : Gas Regulator Troubleshooting Prerequisite : Course 1100 or 2 years experience This course is intended for technicians responsible for installing, maintaining and
More informationHEATING, VENTING, AIR CONDITIONING, AND REFRIGERATION TECHNOLOGY BAS
Heating, Venting, Air Conditioning, and Refrigeration Technology BAS 1 HEATING, VENTING, AIR CONDITIONING, AND REFRIGERATION TECHNOLOGY BAS The Heating, Venting, Air Conditioning, and Refrigeration (HVACR)
More informationCross Linking Research and Education and Entrepreneurship
Cross Linking Research and Education and Entrepreneurship MATLAB ACADEMIC CONFERENCE 2016 Ken Dunstan Education Manager, Asia Pacific MathWorks @techcomputing 1 Innovation A pressing challenge Exceptional
More informationFEDP. About FEDP. FESP-001: 4 ½ Days Fundamentals of Process Risk Assessment, HAZID & HAZOP
GRADUATE PROGRAMS Develop practical skills for career excellence in the Oil & Gas Surface Production Engineering field. Bridge the gap between theoretical knowledge and industrial application, in the shortest
More informationMechanical Engineering Program Assessment Report
Mechanical Engineering Program 2015-1016 Assessment Report INTRODUCTION This report documents the assessment done within the Bachelor of Science in Mechanical Engineering (BSME) program at Oregon Institute
More informationNortheast Alabama Community College
Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2015-2016 Academic Year Written Communication Students will demonstrate adequate writing skills by
More informationOil And Gas Mba Manual
Oil And Gas Mba Manual If searched for the book Oil and gas mba manual in pdf form, then you have come on to the loyal website. We present full option of this ebook in doc, txt, epub, PDF, DjVu forms.
More informationA i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A )
8 5 4 5 A i r c r a f t C o m p o n e n t s a n d F u n c t i o n s ( 1 1 A ) 30S/30E/30M An Aviation and Aerospace Technologies Course 8 5 4 5 : A i r c r a f t C o m p o n e n t s a n d F u n c t i
More informationSJSU Annual Program Assessment Form Academic Year
SJSU Annual Program Assessment Form Academic Year 2015 2016 Department: Computer Science Program: BSCS College: Science Program Website: http://www.sjsu.edu/cs/ Link to Program Learning Outcomes (PLOs)
More informationCHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS E CH-75
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10E CH-75 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
More informationIWCF Well Control Level 5. Celle Drilling Conference 2017
IWCF Well Control Level 5 Celle Drilling Conference 2017 Contents IWCF well control level 5 course program Background - who is it for Structure and contents Delivery approach Questions Why? Level 5 background
More informationCanadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) ELECTROMECHANICAL ENGINEERING TECHNOLOGY - TECHNICIAN Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles
More informationi-tech SERVICES DELIVERING INTEGRATED SERVICES AND PRODUCTS ACROSS THE FIELD LIFE CYCLE
i-tech SERVICES DELIVERING INTEGRATED SERVICES AND PRODUCTS ACROSS THE FIELD LIFE CYCLE 3 About us 4 What we do 6 Why choose us? 7 Service and product capabilities OUR VALUES Safety Integrity Innovation
More informationEmployability Enhancement Program for Engineers. Transformation of an engineering degree holder to a real Engineer, who can do more at work.
TRACEZ Training Services Oman www.tracezglobal.com Employability Enhancement Program for Engineers Transformation of an engineering degree holder to a real Engineer, who can do more at work. EEP- Introduction
More informationAMTEC Modules. AMT 102: General PM and Predictive Maintenance AMT 1021: Basic PM AMT 1022: Advanced Technologies
AMT 100: Computer Literacy AMT 1001: Orientation to Computer Systems AMT 1002: Operating Systems AMT 1003: Computer Applications AMT 1004: Internet/Intranet AMT 101: Fluid Power and Electrohydraulics/Pneumatics
More informationINSPIRING TECHNICAL EXCELLENCE
INSPIRING TECHNICAL EXCELLENCE A new world-class training facility for Oman Introducing TPO Takatuf Petrofac Oman (TPO) is a new joint venture founded by Takatuf, the Human Capital solutions provider,
More informationPetroleum Engineering Technology Student Guide, v 1 August 22, Furr High School. Houston Community College
Petroleum Engineering Technology Student Guide, v 1 August 22, 2016 Furr High School Houston Community College Professor Thomas (Tom) Lane Thomas.lane@hccs.edu Classroom 301B Student Name: 1 Student Guide
More informationIADC NEW INITIATIVES
IADC NEW INITIATIVES WellSharp WellSharp Well Control Training Features Role specific training and assessments Expanded emphasis on critical topics such as risk management, situational awareness, and barriers
More informationDrilling 101. October 21, 2014 THE HOTEL at Mandalay Bay Las Vegas, NV. Image Source: WikiUser Dwight Burdette
COurse Drilling 101 THE HOTEL at Mandalay Bay Image Source: WikiUser Dwight Burdette EUCI is authorized by IACET to offer 0.8 CEUs for the course. 1 Overview Drilling is a complex process involving many
More informationCURRICULUM. Family and Consumer Science INTERIOR DESIGN. (Elective Course)
CURRICULUM Family and Consumer Science INTERIOR DESIGN (Elective Course) Supports Academic Learning Expectation # 1 Students and graduates of Ledyard High School will read and write critically and effectively
More informationManufacturing Operations
End of Course (EOC) Bank Blueprints Manufacturing Operations Table of Contents Table of Contents... 1 About Test Blueprints... 2 Gas Metal Arc Welding... 3 Shielded Metal Arc Welding... 4 Flux Cored Arc
More informationBACHELOR PROGRAMS CREDIT HOURS SYSTEM C A I R O U N I V E R S I T Y
BACHELOR PROGRAMS CREDIT HOURS SYSTEM C A I R O U N I V E R S I T Y FA C U LT Y O F E N G I N E E R I N G 2018-2019 BACHELOR PROGRAMS, CREDIT HOURS SYSTEM CAIRO UNIVERSITY, FACULTY OF ENGINEERING Since
More informationDrilling Courses
2017-2018 Drilling Courses Includes Prentice Training Company Courses Taught By: Calvin Barnhill NORTHSTAR TRAINING Northstar Training is very excited to be able to continue to teach the Prentice Training
More informationB.B.S./M.B.S. Industrial Technology
Blue Marble University B.B.S./M.B.S. Industrial Technology Curriculum and Course Descriptions (4 Year Program) This is a combined Bachelor of Business Science (BBS) and Master of Business Science (MBS)
More informationDRILLING 101 COURSE. March 11, 2019 Hyatt Regency Houston Houston, TX. FUNDAMENTALS OF WELL COMPLETIONS MARCH 12, 2019 Houston, TX RELATED EVENT:
COURSE DRILLING 101 March 11, 2019 Hyatt Regency Houston Houston, TX RELATED EVENT: FUNDAMENTALS OF WELL COMPLETIONS MARCH 12, 2019 Houston, TX (Receive discounted registration for attending both events!)
More informationComputer Technology. Broad-based Courses
Computer Technology Broad-based Courses TEJ3E Computer Technology, Grade 11, Workplace Preparation Name: This job may allow employees to develop the knowledge and skills related to computer hardware, networks,
More informationSend your directly to
Welcome to Chess Subsea Production System Training - SPS Subsea production system (SPS) is associated with the overall process and all the equipment involved in drilling, field development, and field operation.
More informationCHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS D CH-42
CHAPTER 10 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) NAVPERS 18068-10D CH-42 AVIATION SUPPORT EQUIPMENT TECHNICIAN (AS) TABLE OF CONTENTS SCOPE OF RATING GENERAL INFORMATION AVIATION SUPPORT EQUIPMENT
More informationNational Aviation Academy
Motto Two Main Locations: King Abdullah Economic City (KAEC) - Jeddah Thumamah Airport Riyadh MISSION: To become the leading global aviation academy graduating worldclass aviation professionals and fueling
More informationAnalytical Engineering Limited. Company profile About us Core business areas & transferable skills Clients Company mission statement
Consultant Engineers Analytical Engineering Limited Onshore and Offshore Engineering Solutions for the Petroleum Industry and more Company profile About us Core business areas & transferable skills Clients
More informationApplication of FRP Pipes & Other Composites in Oil & Gas Sector: Opportunities and Challenges
PRESENTATION ON Application of FRP Pipes & Other Composites in Oil & Gas Sector: Opportunities and Challenges NCRAC 2012, Hyderabad 15.06.2012 S.K. Dewri, Chief Engineer, ONGC, Institute of Engineering
More informationENGINEERING TECHNOLOGY PROGRAMS
Engineering Technology Accreditation Commission CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews during the 2019-2020 Accreditation Cycle Incorporates all changes approved
More informationGrades 9 to 12 Aviation and Aerospace Technologies. Manitoba Technical-Vocational Curriculum Framework of Outcomes
Grades 9 to 12 Aviation and Aerospace Technologies Manitoba Technical-Vocational Curriculum Framework of Outcomes G r a d e s 9 t o 1 2 A v i a t i o n a n d A e r o s p a c e T e c h n o l o g i e s
More informationBaccalaureate Program of Sustainable System Engineering Objectives and Curriculum Development
Paper ID #14204 Baccalaureate Program of Sustainable System Engineering Objectives and Curriculum Development Dr. Runing Zhang, Metropolitan State University of Denver Mr. Aaron Brown, Metropolitan State
More informationEngineering Design and Training Services
PRESSURE VESSEL RELATED SERVICES: Pressure Vessels essels, Heat Exchangers,, Tanks Oil & Gas, Power,, Chemical, Petrochemical, Fertilizer etc. Engineering Design and Training Services Vision Statement
More informationEstimated Program Length & Cost * Award Length Credit Hours Tuition Fees Books Tools Supplies
- 170 The College for Real Careers Program Information The Program at Trenholm State Community College is a multi-craft curriculum. Many crafts are a part of the training process. Craft related instructors
More information[E-BOOK] EBOOKS ON GAS DURING DRILLING SERVICE MANUAL ARCHIVE
12 November, 2017 [E-BOOK] EBOOKS ON GAS DURING DRILLING SERVICE MANUAL ARCHIVE Document Filetype: PDF 501.58 KB 0 [E-BOOK] EBOOKS ON GAS DURING DRILLING SERVICE MANUAL ARCHIVE Read or Download Drilling
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2017-2018 Accreditation Cycle Incorporates all changes approved by the ABET Board of Delegates Engineering Technology
More informationBOLTIGHT HYDRAULIC BOLT TENSIONING TIGHTEN BOLTS SIMULTANEOUSLY TO ENSURE EVEN PRELOAD
BOLTIGHT HYDRAULIC BOLT TENSIONING TIGHTEN BOLTS SIMULTANEOUSLY TO ENSURE EVEN PRELOAD 2 BOLTIGHT I BRAND STORY BEYOND POSSIBLE In the world of heavy industry, where large machines and equipment build
More information1988 Develops a complete subsea wireline intervention system for use in the North Sea Halliburton/K BR separation
Safety Moment Halliburton History 1900-1955 1919 Erle P. Halliburton starts New Method Oil Well Cementing Co. 1922 Company cements its 500 th well 1938 Halliburton cements the first offshore well using
More informationMSc Chemical and Petroleum Engineering. MSc. Postgraduate Diploma. Postgraduate Certificate. IChemE. Engineering. July 2014
Faculty of Engineering & Informatics School of Engineering Programme Specification Programme title: MSc Chemical and Petroleum Engineering Academic Year: 2017-18 Degree Awarding Body: University of Bradford
More informationOil and Gas Production Technician Skill Standards
Oil Gas Production Technician Skill Stards 1 Occupational Skills Knowledge Definitions 1. - Knowledge of company, industry, regulatory safe operating stards (e.g.,, Lockout/Tagout, electrical area classification,
More informationMr Gould was an adventurer with a great deal of passion for nature and energy
Mr Gould was an adventurer with a great deal of passion for nature and energy Gould is defined as: the discovery of an ideal wind region. But why is the name Gould associated with a wind region? Mr Gould
More informationServices Industry Analysis
Instructional And Information Technology Services Industry Analysis Aims, The module provides instruction in the impact and use of information technology in the financial services sector, including be
More informationAdministrative Staff Questionnaire. Overall technical direction. Management and administration of center. Management of individual research projects
Administrative Staff Questionnaire Each university/industry cooperative center represents a unique organizational design. In order to understand better the overall Center program, we would like to know
More informationSustainable Construction Technology 2008 Annual Program Review
Sustainable Construction Technology 2008 Annual Program Review Introduction The Sustainable Construction Technology (SCT) program prepares students in general building construction and maintenance of large
More informationSPOOLBASE & MULTIJOINT SERVICES
SPOOLBASE & MULTIJOINT SERVICES PIPELINE FABRICATION COMPANY PROFILE Pipeline Technique is a world leading provider of solutions to the oil and gas industry for the most demanding challenges in Welding,
More informationUmbilicals and Subsea Power Cables Excellence in Connecting Subsea EWEA
Umbilicals and Subsea Power Cables Excellence in Connecting Subsea EWEA Control and Power Umbilicals The control umbilical consists of hydraulic lines used for transfer of chemicals and fluids. In addition,
More informationAutomotive Technology
Automotive Technology Dr. Mohamad Zoghi, Acting Chair Automotive Technology Department Mohamad.Zoghi@farmingdale.edu 631-794-6292 School of Engineering Technology Associate in Applied Science Degree The
More informationOwensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List
Owensboro Community & Technical College Approved Discover College Concurrent Enrollment Program Course List 2013-2014 Courses below are subject to availability at each partner high school, based on teacher
More informationIndustry & Govt Changes Post Macondo
Cover graphic should fill and not exceed the defined grey box. Industry & Govt Changes Post Macondo Gary F. Devlin VP Quality & Customer Experience March 2013 Deepwater Industry / Focus Approach Joint
More informationAUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES
AUTOMATION & MECHATRONIC SYSTEMS COURSE MODULES A bionic arm, a self-driving car and an autopilot train system - these are some icons of the amazing world of automation technology that are brought about
More informationNortheast Alabama Community College
Student Attainment of General Education and Program Learning Outcomes Learning Outcomes Summary Report: 2016-2017 Academic Year Written Communication Students will demonstrate adequate writing skills by
More informationDeep Water Technology A Focus on Drilling US-China Oil & Gas Industry Forum
Deep Water Technology A Focus on Drilling US-China Oil & Gas Industry Forum June 28-29, 2005 Thomas E. Williams Noble Technology Services Division Deep Water is Being Redefined Each Year 1992 1,000 was
More informationGreat Reasons to Build Your Career in North East England. Subsea, Marine, and Offshore
Great Reasons to Build Your Career in North East England Subsea, Marine, and Offshore There are many great reasons to build your career in North East England. This presentation, developed through a partnership
More informationPersonalized Service, Industry Expertise. Franklin Howard
Personalized Service, Industry Expertise. Franklin Howard PRODUCTS Franklin Howard International provides high quality drilling equipment and spare parts from top manufacturers in the United States. Warranty
More informationTECHNOLOGY EDUCATION
TECHNOLOGY EDUCATION Graduation Requirement: All students must earn one credit in Arts or Career & Technical Education classes. COURSE TITLE CREDITS GRADES OFFERED Communications Pathway-Media* Introduction
More informationDeep offshore gas fields: a new challenge for the industry
Deep offshore gas fields: a new challenge for the industry Emil Gyllenhammar Aker Solutions PAU, FRANCE 5 7 APRIL 2016 The challenge Remote gas fields in offshore depths of up to 3000 m Far away from the
More informationApplication of Lean Six-Sigma Methodology to Reduce the Failure Rate of Valves at Oil Field
, 22-24 October, 2014, San Francisco, USA Application of Lean Six-Sigma Methodology to Reduce the Failure Rate of Valves at Oil Field Abdulaziz A. Bubshait, Member, IAENG and Abdullah A. Al-Dosary Abstract
More informationENGINEERING SERVICES CONSULTANCY
ENGINEERING SERVICES CONSULTANCY Managing complexity, unlocking value Petrofac Engineering & Production Services 02 03 Discover the difference Consultancy services Petrofac is an international service
More informationfor High School Students Presented in collaboration by:
for High School Students Presented in collaboration by: Find us online www.petroed.com/tea Download our whitepaper! Written for CTE Directors & Ag Teachers Provides information on jobs Outlines the course
More informationTraining Fees 4,250 US$ per participant for Public Training includes Materials/Handouts, tea/coffee breaks, refreshments & Buffet Lunch
Training Title WELL HEAD OPERATIONS Training Duration 5 days Training Venue and Dates REF OP035 Well Head Operations 5 08-12 May $4,250 Abu Dhabi, UAE Will be held in any of the 5 star hotels. The exact
More informationIn any of the 5 star hotel. The exact venue will be intimated prior to course commencement.
Training Title WELLHEAD OPERATION Training Duration 5 days Training Venue and Dates Wellhead Operations 5 19 23 May $3,750 Abu Dhabi, UAE In any of the 5 star hotel. The exact venue will be intimated prior
More informationNOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD
NOVA SCOTIA APPRENTICESHIP CURRICULUM STANDARD for the Occupation of Instrumentation and Control Technician New Blocks 1, 2, 3 and 4 in September 2014 See Page 11 for NS Program Structure Based on the
More informationNEW YORK STATE TEACHER CERTIFICATION EXAMINATIONS
NEW YORK STATE TEACHER CERTIFICATION EXAMINATIONS TEST DESIGN AND FRAMEWORK May 2018 Authorized for Distribution by the New York State Education Department This test design and framework document is designed
More informationENGINEERING TECHNOLOGY PROGRAMS
Engineering Technology Accreditation Commission CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2018-2019 Accreditation Cycle Incorporates all changes approved
More informationRisk Management Department. Control of Hazardous Energy
Risk Management Department Control of 1 Introduction Power tools, machinery and devices make our lives easier and our jobs more productive. However, the tools, machines and systems we use every day can
More informationEngineering Technology and Science xxx
79 xxx The Faculty of has a mission to provide high-quality, hands-on technical education, enabling graduates to continually meet the engineering needs and challenges of United Arab Emirates and beyond.
More information