SECTION INTERIOR ARCHITECTURAL WOODWORK
|
|
- Fay Bryan
- 5 years ago
- Views:
Transcription
1 SECTION INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Plastic-laminate cabinets. 2. Plastic-laminate countertops. 3. Plastic-laminate window sills. 4. Cabinet hardware and accessories. 5. Steel support tubes. 6. Shop finishing of woodwork of hardwood edges. B. Related Sections: 1. Section Alternates, for Deduct Alternate-4. C. Interior architectural woodwork includes wood furring, blocking, shims, and hanging strips unless concealed within other construction before woodwork installation. D. Woodwork Fabricator and Installer shall also perform Work in Section Overhead Coiling Doors at MW-3 as part of Contract 1-A. 1.2 SUBMITTALS A. Product Data: For cabinet hardware, accessories, and grilles pertaining to architectural woodwork. B. Shop Drawings: Show location of each item, dimensioned plans and elevations, large-scale details, attachment devices, and other components. C. Samples: 1. Plastic-laminates, for each type, color, pattern, and surface finish inch square section of each type of countertop with finished hardwood edges. D. Woodwork Quality Standard Compliance Certificates: AWI Quality Certification Program certificates. 1.3 QUALITY ASSURANCE A. Installer Qualifications: Fabricator of woodwork. B. Quality Standard: Unless otherwise indicated, comply with AWI's "Architectural Woodwork Quality Standards. 1. Provide AWI Quality Certification Program labels and certificates for woodwork. 1.4 PROJECT CONDITIONS A. Environmental Limitations: Do not deliver or install woodwork until building is enclosed, wet Work is complete, and HVAC system is operating and maintaining temperature and relative humidity at occupancy levels during the remainder of the construction period. INTERIORS PACKAGE OF 5 INTERIOR ARCHITECTURAL WOODWORK
2 PART 2 - PRODUCTS 2.1 WOODWORK FABRICATORS A. Subject to compliance with requirements, provide products from 1 of the following fabricators: 1. Aaron Carlson Company. 2. Anderson Millwork Company. 3. Associated Wood Products, Inc. 4. Cosney Corporation. 5. Fromm's Sign In Laminate Inc. 6. Millcraft, LLC. 7. Northern Woodwork, Inc. 8. Northland Cabinets, Inc. 9. Northwest Cabinets, Inc. 10. O Keefe Inc. 11. Pioneer Custom Cabinets. 12. R&S Casework. 13. Siewert Cabinet & Fixture Mfg. Inc. 14. Wilkie Sanderson. 15. Wilmar Wood Products. 2.2 MATERIALS A. Wood Species and Cut for Transparent Finish: Solid Red oak, plain sawn or sliced. For hardwood edges. B. Wood Products: 1. Hardboard: AHA A Medium-Density Fiberboard: ANSI A208.2, Grade MD, made with binder containing no urea formaldehyde. a. MDF-1: Standard medium-density fiberboard typical use unless indicated otherwise. b. MDF-2: Moisture-resistant for use at MW-4, and counter and back splash at MW-5 made with exterior glue. C. High-Pressure Decorative Laminate: NEMA LD 3, grades as indicated or, if not indicated, as required by woodwork quality standard. 1. Subject to compliance with requirements, provide products by one of the following: a. ABET Incorporated. b. Forbo Arborite. c. Formica Corporation. d. Laminart. e. Nevamar Decorative Surfaces. f. Pionoite Decorative Laminates. g. WilsonArt International. D. Tempered Float Glass for MW-2: GLASS-01T as specified in Section Glass in MW-2 is part of Scope for Section Provided glass with eased and polished edges for doors and shelves at MW-2. E. Metal Support Tubing for MW-3 General: Provide materials with smooth, flat surfaces, unless otherwise indicated. For metal fabrications exposed to view in completed Work, provide materials without seam marks, roller marks, rolled trade names, or blemishes. 1. Steel Support Tubing: ASTM A500, cold-formed steel tubing in size indicated on Drawings. 2. Universal Shop Primer: Fast-curing, lead- and chromate-free, universal modified-alkyd primer complying with MPI #79. INTERIOR ARCHITECTURAL WOODWORK OF 5 INTERIORS PACKAGE
3 2.3 CABINET HARDWARE AND ACCESSORIES A. General: Provide cabinet hardware and accessory materials associated with architectural woodwork, except for items specified in Section Door Hardware. B. Frameless Concealed Hinges (European Type): BHMA A156.9, B01602, 135 degrees of opening, self-closing. C. Wire Pulls: Back mounted, solid metal, 4 inches long, 5/16 inch in diameter D. Catches: Magnetic catches, BHMA A156.9, B E. Drawer Slides: BHMA A156.9, B Standard Duty (Grade 1, Grade 2, and Grade 3): Side mounted and extending under bottom edge of drawer; full-extension type; zinc-plated stee with polymer rollers. F. Keyboard Tray: Install Owner-furnished unit. G. Grommets for Cable Passage through Countertops: 2 inch OD, black, molded-plastic grommets and matching plastic caps with slot for wire passage. 1. Product: Subject to compliance with requirements, provide SG Series by Doug Mockett & Company, Inc. or approved substitution. H. Linear Diffusers (GRILL-1): Aluminum "pencil proof" bar grille, 7/32 inch bars, 7/16 inch spacing, zero degree deflection. For use at MW Border: Type 13 with Type A fastening. 2. Finish: No. 34 Clear anodized. 3. Acceptable Product: Model CT-PP-O by Titus or approved substitution. I. Standards (Pilasters) for Adjustable Shelf Supports for MW-2: 1. Quantities: Where indicated, provide the following quantities of parts: a. Adjustable Steel Standards 80A60: 3. b. Adjustable Steel Shelf Brackets 180A16: 6. c. Clear Acrylic Front Rest KV103P: 6. d. Clear Acrylic Multi-Shelf Back Rest KV104P: Acceptable Product: Satin Anodized Standards and Brackets by C R Laurence Co. Inc. or approved substitution. J. Tracks for Sliding Glass Doors for MW-2: Aluminum. Rolling track assembly consisting of lower rail, upper channel, H-bar, and wheel assembly. 1. Quantities: Where indicated, provide the following quantities of parts: a. Rolling Track Assembly - CTA00A: 1. b. End Cap for Sliding Door Lock SC: 1. c. H-Bar - DV144C: 1. d. Anti-Lift Clip 6306: 1. e. Pulls D643A: 3 inch pull with 7/16 inch lip for glass panel Acceptable Product: Satin Anodized Continental Style Security Rolling Track Assembly by C R Laurence Co. Inc. or approved substitution. K. Exposed Hardware Finishes: For exposed hardware, provide finish that complies with BHMA A for BHMA finish number indicated. 1. Bright Chromium Plated: BHMA 625 for brass or bronze base; BHMA 651 for steel base. 2.4 MISCELLANEOUS MATERIALS A. Adhesives, General: Do not use adhesives that contain urea formaldehyde. INTERIORS PACKAGE OF 5 INTERIOR ARCHITECTURAL WOODWORK
4 2.5 FABRICATION A. General: Complete fabrication to maximum extent possible before shipment to Project site. Where necessary for fitting at site, provide allowance for scribing, trimming, and fitting. 1. Interior Woodwork Grade: Custom. 2. Shop cut openings to maximum extent possible. Sand edges of cutouts to remove splinters and burrs. Seal edges of openings in countertops with a coat of varnish. B. Plastic-Laminate Cabinets (MW-5): 1. AWI Type of Cabinet Construction: Flush overlay, unless otherwise indicated. 2. Laminate Cladding for Exposed Surfaces: High-pressure decorative laminate as follows: a. Horizontal Surfaces Other Than Tops: Grade HGS. b. Postformed Surfaces: Grade HGP. c. Vertical Surfaces: Grade VGS. d. Edges: PVC edge banding, 0.12 inch thick, matching laminate in color, pattern, and finish. 3. Materials for Semiexposed Surfaces Other Than Drawer Bodies: Thermoset decorative panels. 4. Drawer Sides and Backs: Thermoset decorative panels. 5. Drawer Bottoms: Thermoset decorative panels. 6. Colors, Patterns, and Finishes: As selected by Architect from laminate manufacturer's full range of colors, patterns, and finishes. C. Plastic-Laminate Countertops: Provide countertops with backsplashes unless indicated otherwise. 1. High-Pressure Decorative Laminate Grade: HGS. 2. Colors, Patterns, and Finishes: As selected by Architect from laminate manufacturer's full range of colors, patterns, and finishes. 3. Edge Treatment: Same as laminate cladding on horizontal surfaces or hardware edges where indicated on Drawings. 4. Core Material at Sinks: MDF-2. D. Window Sills (MW-4): Single piece construction unless recommended otherwise by manufacturer. 1. Substrate: MDF Thickness: 3/4 inch thick unless indicated otherwise. 3. Ease exposed edges. 4. Square corners. 5. Seal perimeter joint where stool abuts vertical surface. a. Sealant specified in Section SHOP FINISHING A. Finish architectural woodwork at fabrication shop. Defer only final touchup, cleaning, and polishing until after installation. B. Backpriming: Apply 1 coat of sealer or primer, compatible with finish coats, to concealed surfaces of woodwork. Apply 2 coats to back of paneling. C. Transparent Finish: Apply the following finish to hardwood edges where indicated. 1. Grade: Custom. 2. AWI Finish System: Conversion varnish. 3. Staining: None required. 4. Sheen: Satin, 31 to 45 gloss units measured on 60-degree gloss meter per ASTM D523, unless indicated otherwise. INTERIOR ARCHITECTURAL WOODWORK OF 5 INTERIORS PACKAGE
5 PART 3 - EXECUTION 3.1 INSTALLATION A. Before installation, condition woodwork to average prevailing humidity conditions in installation areas. Examine shop-fabricated Work for completion and complete Work as required, including removal of packing and backpriming. B. Grade: Install woodwork to comply with requirements for the same grade specified in Part 2 for fabrication of type of woodwork involved. C. Install woodwork level, plumb, true, and straight to a tolerance of 1/8 inch in 96 inches. Shim as required with concealed shims. D. Scribe and cut woodwork to fit adjoining Work, refinish cut surfaces, and repair damaged finish at cuts. E. Anchor woodwork to anchors or blocking built in or directly attached to substrates. Secure with countersunk, concealed fasteners and blind nailing as required for complete installation. Use fine finishing nails for exposed fastening, countersunk and filled flush with woodwork and matching final finish if transparent finish is indicated. F. Cabinets: Install without distortion so doors and drawers fit openings properly and are accurately aligned. Adjust hardware to center doors and drawers in openings and to provide unencumbered operation. 1. Fasten wall cabinets through back, near top and bottom, at ends and not more than 16 inches on center with fasteners appropriate for anchoring to structure. G. Countertops: Anchor securely by screwing through corner blocks of base cabinets or other supports into underside of countertop. 1. Install countertops with no more than 1/8 inch in 96 inch sag, bow, or other variation from a straight line. 2. Secure backsplashes to tops with concealed metal brackets at 16 inches on center. 3. Calk space between backsplash and wall with sealant specified in Section Joint Sealants. END OF SECTION INTERIORS PACKAGE OF 5 INTERIOR ARCHITECTURAL WOODWORK
A. Product Data: For each type of product indicated cabinet hardware and accessories, and finishing materials and processes.
SECTION 06402 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More information1. Division 6 Section "Rough Carpentry" for furring, blocking, and other carpentry work that is not exposed to view.
SECTION 06402 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification
More informationD. Product Certificates: Signed by manufacturers of casework certifying that products furnished comply with requirements.
SECTION 12356 - CASEWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSECTION WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND LAMINATE COUNTERTOPS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS
SECTION 064113- WOOD ARCHITECTURAL CABINETS AND QUARTZ COUNTERTOPS PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationSECTION PLASTIC-LAMINATE-FACED ARCHITECTURAL CABINETS
SECTION 064116 - PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Plastic-laminate-faced architectural cabinets. 2. Wood furring, blocking, shims, and hanging strips for installing plastic-laminatefaced
More informationADDENDUM TO THE CONTRACT. for the GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION. Contract No. E16-181
ADDENDUM TO THE CONTRACT for the ENGINEERING DEPARTMENT GLACIER FIRE STATION KITCHEN AND CLASSROOM RENOVATION Contract No. E6-8 ADDENDUM NO.: ONE CURRENT DEADLINE FOR BIDS: May 9, 206 PREVIOUS ADDENDA:
More informationADDENDUM TO BID DOCUMENTS ADDENDUM #03 SCCD RFP: # Project: Solano Community College District Vacaville Classroom Building (Annex) Renovation
Vacaville Classroom Annex Renovation Documents #18-005 ADDENDUM TO BID DOCUMENTS ADDENDUM #03 SCCD RFP: #18 005 Project: Vacaville Classroom Building (Annex) Renovation Date: 11/22/2017 Addendum # 03 The
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 064023 PART 1 - GENERAL 1.1 SUMMARY This Section includes the following: 1. Architectural wood casework: a. Plastic-laminate-faced cabinets. b. Wood-veneer-faced cabinets. 2. Countertops: a. Solid-surfacing
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 06 WOOD, PLASTICS AND COMPOSITES
SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Interior standing and running trim. 2. Interior frames and jambs. 3. Stairwork and
More informationSECTION ARCHITECTURAL WOODWORK
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Custom Cabinet Units a. Plastic Laminate b. Sound Barrier for Casework 2. Cabinet Hardware B. Related Sections:
More informationSECTION PLASTIC-LAMINATE-FACED ARCHITECTURAL CABINETS AND COUNTERTOPS
SECTION 06 41 16 - CABINETS AND COUNTERTOPS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 06402 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More informationSECTION CUSTOM CABINETS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Preparation for installing utilities. 1.02 RELATED REQUIREMENTS SECTION 06410 - A. Section
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Laminate clad cabinets and custom components. B. Laminate clad countertops. C. Cabinet hardware including countertop
More informationDIVISON 6 WOODS AND PLASTICS SECTION PLASTIC LAMINATE FACED ARCHITECTUAL CABINETS
DIVISON 6 WOODS AND PLASTICS PART 1 - GENERAL 1:1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationLindenwold Boro Hall Lindenwold, NJ. Bishop & Smith Architects Laurel Springs, NJ. August 2, 2012 PART 1 - GENERAL 1.1 SUMMARY. A.
SECTION 061000 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood blocking and nailers. 2. Wood furring and grounds. 3. Plywood backing panels. 1.2 ACTION SUBMITTALS A. Product
More informationSECTION ARCHITECTURAL WOOD CASEWORK
SECTION 06410 - ARCHITECTURAL WOOD CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES A. Wood cabinets for opaque finish. B. Flush wood paneling for transparent finish. C. Factory finishing. 1.02 RELATED REQUIREMENTS
More informationA. This Section includes interior architectural woodwork items indicated on Drawings and specified in this Section.
SECTION 064023 - INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. This Section includes interior architectural woodwork items indicated on Drawings and specified in this Section. 1.2 DEFINITIONS
More informationOCCE Courtroom Built-in SSA Jacksonville, NC
OCCE Courtroom Built-in SSA 2015014.00 Jacksonville, NC ADDENDUM 2 ADDENDUM DATE: November 13, 2017 PROJECT: OWNER: ARCHITECT: BIDS DUE: Courthouse Courtroom Built-in 109 Old Bridge Street Jacksonville,
More informationWHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK
WHITE W/OAK TRIM NATURAL MEDIUM NORTHPORT OAK Accessories. We believe that functionality is at the heart of any great kitchen. Above are a few of the accessories available with Merillat Essentials. The
More informationStudent Services & Classroom Addition
SECTION 105116 - WOOD LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationSECTION ARCHITECTURAL WOODWORK. B. Related Sections: 1. Section Paints and Coatings: Field applied painted finishes.
PART 1 - GENERAL 1.1 SUMMARY SECTION 06 40 00 A. Provide architectural woodwork as shown and specified. Work includes: 1. Providing plastic laminate finished casework. 2. Providing plastic laminate clad
More informationROWAN COUNTY AIRPORT APRIL 2017 TERMINAL EXPANSION
SECTION 12300 - MANUFACTURED CASEWORK PART 1 - GENERAL RELATED DOCUMENTS: Drawings, General Conditions and Supplementary General Conditions and other Division-1 Specification Sections, apply to this Section.
More informationSECTION MANUFACTURED CASEWORK
1 GENERAL 1.1 SECTION INCLUDES SECTION 12300 MANUFACTURED CASEWORK A. Work required to complete the manufactured casework indicated by the Contract Documents, and the items necessary for its proper installation.
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK
LSE ARCHITECTS, INC. LSE: 14.1001.01 SEWARD MONTESSORI SCHOOL ADDITION & REMODELING SECTION 06 40 23 PART 1 - GENERAL 1.01 SUMMARY A. Section Includes 1. Plastic-laminate clad cabinets and countertops.
More informationA. Dimension Lumber: Lumber of 2 inches nominal or greater but less than 5 inches nominal in least dimension.
SECTION 06 10 53 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationTender No Section St. James - Assiniboia Centennial Pool Fitness Facility Addition Page 1
Fitness Facility Addition Page 1 PART 1 GENERAL 1.1 SECTION INCLUDES.1 Finish carpentry items including shop prefabricated casework and countertops..2 Hardware and attachment accessories..3 Wood Benches..4
More informationB. Shop Drawings: For residential casework. Include plans. elevations, details, and attachments to other work.
HVAC 1Sunporch 1Fire Alarm Renovation SECTION 123530 RESIDENTIAL CASEWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes laundry room cabinets. 1.2 ACTION SUBMITTALS A. Product Data: For each type of
More informationSECTION ARCHITECTURAL WOOD CASEWORK
PART 1 GENERAL 1.01 SECTION INCLUDES A. Specially fabricated cabinet units. B. Countertops. C. Cabinet hardware. D. Factory finishing. E. Preparation for installing utilities. 1.02 SUBMITTALS SECTION 06
More informationMusic Area Casework General 1.01 Summary Related Sections Definitions Qualifications and Quality Assurance
1.00 General 1.01 Summary Music Area Casework A. This section includes the following Scope of Work as referred to in the plans: 1. Thermally Fused Laminate manufactured casework, for use in music areas,
More informationB. Section Rough Carpentry: Support framing, grounds, and concealed blocking.
SECTION 06 41 00 - ARCHITECTURAL WOOD CASEWORK PART 1: GENERAL 1.1 SECTION INCLUDES A. Specially fabricated cabinet units. B. Cabinet hardware. C. Factory finishing. 1.2 RELATED REQUIREMENTS A. Division
More informationSECTION MISCELLANEOUS ROUGH CARPENTRY
SECTION 06 1053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSECTION CUSTOM CASEWORK
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 06 41 00 CUSTOM CASEWORK A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 specification sections,
More informationSECTION LAMINATE CLAD CASEWORK - COMMERCIAL
SECTION 123400 LAMINATE CLAD CASEWORK - COMMERCIAL PART 1 GENERAL 1.01 SECTION INCLUDES A. Fixed modular laminate clad casework and components. B. Flexible rail mounted laminate clad casework and components.
More informationSECTION FINISH CARPENTRY PART 1 GENERAL. 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section.
SECTION 06200 - FINISH CARPENTRY PART 1 GENERAL 1.1 SECTION INCLUDES A. Interior Finish Carpentry Work: 1. Refer to schedule at end of Section. 1.2 RELATED SECTIONS A. Section 06100 - Rough Carpentry:
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 08 - OPENINGS
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Exterior stile and rail wood doors and sidelites. 2. Interior stile and rail wood doors. 3. Interior fire-rated,
More information***************************************************************************************************************
06400 ARCHITECTURAL WOODWORK SPECIFIER: CSI MasterFormat 2004 number 06 40 00 PART 1 GENERAL 1.1 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install
More informationCaseworkUSA. specifications. 1.1 General 1.2 Summary. 1.3 Related Sections. 1.4 Definitions. 1.5 Qualifications and Quality Assurance
1.1 General 1.2 Summary A. This section includes the following Scope of Work as referred to in the plans: 1. Plastic laminate manufactured casework 2. Plastic laminate countertops 1.3 Related Sections
More informationB. American Society for Testing and Materials (ASTM):
SECTION 06400 ARCHITECTURAL WOODWORK PART 1 GENERAL 1.01 SUMMARY A. Provide necessary services, tools, equipment, material, and labor required to furnish and install millwork and cabinet work. Install
More informationSECTION FINISH CARPENTRY
SECTION 06200 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to
More informationDIVISION 6 WOOD, PLASTICS AND COMPOSITES
DIVISION 6 WOOD, PLASTICS AND COMPOSITES PART 1 GENERAL 1.01 SECTION INCLUDES SECTION 06 1000 ROUGH CARPENTRY A. Rough opening framing for doors, windows, and roof openings. B. Roofing nailers. C. Preservative
More informationCoordinate installation of rough carpentry members specified in other sections.
1 1.03 Preservative treated wood materials. Concealed wood blocking, nailers, and C. Miscellaneous wood nailers, furring, and grounds. PART2 2.01 See Section 01 30 00 =Administrative Requirements, for
More informationAddendum. McKee and Associates Architecture and Interior Design. No. ONE Date: Project:
McKee and Associates Architecture and Interior Design Addendum No. ONE Date: 10.8.18 Project: A New Office for Gaston Elementary School for The Etowah County Board of Education Gadsden, Alabama A1.1 GENERAL
More informationE.M. Crouthamel Elementary School SECTION ROUGH CARPENTRY
SECTION 061000 ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationChevy Chase Club June 30, 2008 Bowie Gridley Architects
SECTION 081433 - STILE AND RAIL WOOD DOORS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationRequest for Quotation. 1. The fabrication and installation of millwork as per attached specifications and drawings issued for construction.
Seven Oaks School Division MAINTENANCE/TRANSPORTATION/CUSTODIAL SERVICE CENTRE 2536 McPhillips Street Winnipeg, MB R2V4J8 Telephone: 204-338-7991 or 204-338-7051 Fax: 204-334-6889 June 29, 2018 Request
More informationSECTION PLASTIC LAMINATED CASEWORK
Specifications SECTION 123400 PLASTIC LAMINATED CASEWORK PART 1 GENERAL 1.01 SECTION INCLUDES This section provides the guidelines and standards for the manufacturing of plastic laminated casework and
More informationSECTION ROUGH CARPENTRY
SECTION 06 10 00 ROUGH CARPENTRY PART 1 - GENERAL 1.01 SUMMARY A. Section includes: 1. Framing with dimension lumber. 2. Wood blocking and nailers. 3. Plywood backing panels. 1.02 ACTION SUBMITTALS A.
More informationAlexandra Secondary College Refurbishment Project No: 1507 SECTION MANUFACTURED CASEWORK - SHOP BUILT 12300/1
SECTION 12300 MANUFACTURED CASEWORK - SHOP BUILT 12300/1 PART I GENERAL 101 Scope The work of this Section covers the supply and installation of manufactured casework items. It includes but is not limited
More informationSECTION FINISH CARPENTRY. A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SECTION 062000 PART 1 GENERAL 1.01 GENERAL REQUIREMENTS A. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION. B. Examine all conditions as they exist at the project prior to submitting
More informationSECTION PRE-MANUFACTURED CABINETS
SECTION 12390 PRE-MANUFACTURED PART 1 GENERAL 1.1 DESCRIPTION OF WORK A. The work includes furnishing all labor, materials and equipment required to complete the Pre-Manufactured Cabinet work as shown
More informationSECTION INTERIOR FINISH CARPENTRY
SECTION 06 20 23 PART 1 - GENERAL 1.01 SUMMARY A. Section includes the following items for field-applied paint finish: 1. Interior standing and running trim. 2. Interior plywood paneling. B. Related Sections
More informationSECTION INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS
SECTION 062023 - INTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationDIVISION 6 WOODS AND PLASTICS SECTION FINISH CARPENTRY
DIVISION 6 WOODS AND PLASTICS SECTION 06 20 23 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationSECTION FINISH CARPENTRY
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 06 20 00 1. Use this section only for NCA projects. 2. Delete between // // if not applicable to project. Also delete any other item or paragraph not applicable
More informationWELLNESS CENTER REMODEL UNIVERSITY OF CALIFORNIA, MERCED MERCED, CALIFORNIA PROJECT NO.: 907432 C. Solid Surfacing Material: 1. Manufacturers: D. Wood: a. First Floor; Wilsonart International, Solid Surfaces,
More informationB. Shop Drawings: For horizontal louver blinds, include fabrication and installation details.
HIGGINSVILLE HABILITATION CENTER MISC. BUILDING RENOVATIONS STATE OF MISSOURI HIGGINSVILLE, MISSOURI SECTION 122113- HORIZONTAL LOUVER BLINDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general
More informationProduct Guide Specification
Shield Casework February 2014 3421 Merriam Lane Overland Park, Kansas 66203 Phone 913-744-2183 Fax 913-384-3477 Website www.shieldcasework.com E-mail info@shieldcasework.com Product Guide Specification
More informationSECTION Display Case Door Series 1301-CM
1 SECTION 12 3559 Display Case Door Series 1301-CM PART 1 - GENERAL 1.01 SUMMARY A. This section includes: 1. Display Case Glass Doors. 2. Sidelites. B. Related work in other sections: 1. 08 8000- Glazing
More informationSCI-FAB Product Specifications. Casework Section 1. Part 1 General
SCI-FAB Product Specifications Casework Section 1 Part 1 General 1.1 SCOPE OF WORK Includes all factory fabricated stainless steel casework as required by the project drawings. 1.2 TYPICAL INCLUSIONS A.
More informationA. Product Data: For each type of process and factory-fabricated product. a. Include statement indicating costs for each certified wood product.
Copyright 2003 and 2005 AIA MASTERSPEC Short Form 11/03 (R 05/07) SECTION 061000 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Framing with dimension lumber.
More informationRIVERSIDE MEDICAL CENTER 5/09
SECTION 06200 - FINISH CARPENTRY PART 1 - GENERAL 1.01 DESCRIPTION: A. Work of this section is subject to requirements of the Contract Documents including the General Conditions and Supplementary Conditions
More informationSection Rough Carpentry
Section 06 10 00 Rough Carpentry 06 10 00-1 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Blocking in wall and roof openings; wood furring and grounds; electrical panel back boards, concealed wood blocking.
More informationC. Installation shall be by experienced carpenters. Coordinate with plumbing and electrical contractors.
12300 - MANUFACTURED CASEWORK PART 1 - GENERAL 1.01 STIPULATIONS A. The specifications sections General Conditions, Special Requirements, and General Requirements form a part of this section by this reference
More informationNATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE
NATURAL TOFFEE SABLE SEDONA KONA SENECA RIDGE MAPLE Framed Door Styles Traditional Overlay Raised Panel Wood veneered raised panel doors feature concealed nickel-finished self-closing hinges. Drawer fronts
More informationA. General millwork and custom cabinetry unless specified herein or so noted on plans as included within this section.
SECTION 12 32 00 MANUFACTURED CASEWORK PART 1 GENERAL 1.1 SUMMARY A. Section includes: 1. Laminated Plastic Casework 2. Laminated Plastic Counter Tops. B. Description of Work: 1. Special and modified stock
More informationAsh Brook Golf Course Scotch Plains, New Jersey
SECTION 062013 - EXTERIOR FINISH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. Work of this Section, as shown or specified, shall be in accordance with the requirements of the Contract Documents.
Section 06400 Page 1 Section 06400 ARCHITECTURAL WOODWORK PART 1 GENERAL 1.1 GENERAL REQUIREMENTS A. Work of this Section, as shown or specified, shall be in accordance with the requirements of the Contract
More informationSECTION WOOD DOORS
SECTION 08211 WOOD DOORS Notice to Vendors: CANV prefers to purchase products that contain tropical wood only if they are certified according to the guidelines of the Forest Stewardship Council (FSC).
More informationB. Related Requirements: 1. Section "Interior Painting" for priming and backpriming of interior finish carpentry.
1 ~GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section. 1.2 SUMMARY
More informationProduct Guide Specification
RYNONE March 2, 2011 North Thomas Avenue, PO Box 128, Sayre, Pennsylvania 18840 P: (570) 888-5272 F: (570) 888-1175 W: www.rynone.com Product Guide Specification Specifier Note: This product guide specification
More informationAMPCO PRODUCTS, INC. TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS
PART 1 - GENERAL 1.1 RELATED DOCUMENTS TECHNICAL SPECIFICATIONS SOLID PHENOLIC CORE TOILET COMPARTMENTS A. Drawings and General Provisions of Contract, including General and Supplementary Conditions and
More informationCascade Ph: Casework Fax: Corp
Cascade Ph: 541-928-3750 Casework Fax: 541-928-3880 Corp email: bill.yates@cascase.com Cascade Casework Corp SPECIFICATIONS FOR PLASTIC LAMINATE FACED CASEWORK Specifications Section 12300 Section 06400
More informationSECTION CUSTOM MILLWORK
PRT 1 GENERL 1.01 SECTION INCLUDES SECTION 06 41 00 Shop-fabricated plastic laminate-clad cabinet units. B. Countertops. C. Cabinet hardware. 1.02 SUBMITTLS See Section 01 30 00 -dministrative Requirements,
More informationSPECIFICATIONS: Red Oak Veneer Casework as manufactured by Mastercraft Woodworking Co., Inc.
SPECIFICATIONS: Red Oak Veneer Casework as manufactured by Mastercraft Woodworking Co., Inc. These specifications contain certain optional selections, which must be made by the specification developer.
More informationA. Provide all finish carpentry needed for a complete and proper installation.
SECTION 06200 - PART ONE GENERAL 1.1 SECTION INCLUDES A. Provide all finish carpentry needed for a complete and proper installation. B. Provide all wood, nails, bolts, screws, and all other items needed
More informationCopyright 2017 AIA MasterSpec Premium 05/17 PRODUCT MASTERSPEC LICENSED BY ARCOM TO WEREVER PRODUCTS, INC.
This Product MasterSpec Section is licensed by ARCOM to Werever Products, Inc. ("Licensee"). This proprietary Product MasterSpec Section uses modified original MasterSpec text. Revisions made to the original
More informationNewport News Public Schools
PURCHASING DEPARTMENT Newport News Public Schools 757-591-4525/ FAX 757-591-4634 12465 WARWICK BOULEVARD NEWPORT NEWS, VIRGINIA 23606-3041 May 9, 2017 Addendum #1 TO: RE: ALL BIDDERS IFB #034-0-2017LC
More informationA. Boards or Strips: Lumber of less than 2 inches nominal size in least dimension.
HIGGINSVILLE HABILITATION CENTER MISC. BUILDING RENOVATIONS STATE OF MISSOURI HIGGINSVILLE, MISSOURI SECTION 061000 - ROUGH CARPENTRY PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
More informationSECTION WOOD ACCORDION FOLDING DOORS
SECTION 08 3513 WOOD ACCORDION FOLDING DOORS PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Wood accordion folding doors. B. Related Sections: 1. Division 01: Administrative, procedural, and temporary
More information.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1.
PAGE 1 PART 1 GENERAL 1.1 REFERENCE.1 Comply with the General Conditions of the Contract, Supplementary General Conditions and the requirements of Division 1. 1.2 RELATED WORK SPECIFIED ELSEWHERE.1 Rough
More informationSECTION FINISH CARPENTRY
SECTION 06 20 00 FINISH CARPENTRY SPEC WRITER NOTE: 1. Delete text between // // not applicable to project. Edit remaining text to suit project. 2. Use terminology as listed and coordinate drawings to
More informationBovard Studios Inc. Section April 6, 2004 Page 1
April 6, 2004 Page 1 This section includes solid flush and surface articulated wood doors, may have veneer facing, solid or glazed (stained glass) design, factory pre-fit, may be factory finished or site
More informationTOWN OF CULPEPER POLICE STATION
SECTION 05520 - HANDRAIL AND RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Guardrails. 1.02 REFERENCE STANDARDS A. ASTM A 53/A 53M - Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated,
More informationDIVISION 12 - FURNISHINGS. Section General Discussion. Introduction
Section 12000 - General Discussion This General Discussion Section contains material which is important to the successful fabrication and/or installation of furnishings and equipment in construction projects.
More informationSECTION INTERIOR ARCHITECTURAL WOODWORK. A. Section includes interior woodwork items indicated not specified elsewhere and as specified.
SECTION 06 40 23 INTERIOR ARCHITECTURAL WOODWORK PART 1 - GENERAL 1.1 SUMMARY A. Section includes interior woodwork items indicated not specified elsewhere and as specified. B. Options: 1. Where casework
More informationROANOKE ISLAND AQUARIUM TURTLE REHABILITATION CENTER SECTION ROUGH CARPENTRY PART 1 - GENERAL
SECTION 061000 - ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationA. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and type.
SECTION 062000 - FINISH CARPENTRY PART 1 - GENERAL 1.1 SECTION REQUIREMENTS A. All trim that has been damages, broken, or missing shall be repaired or replaced with material of the same size, shape, and
More informationOn-Call General Contractor Specifications University of Maryland College Park June 2013
SECTION 061053 - MISCELLANEOUS ROUGH CARPENTRY PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationA. Dimension Lumber: Lumber of 2 inches nominal or greater but less than 5 inches nominal in least dimension.
SECTION 061000- ROUGH CARPENTRY PART 1- GENERAL 1.1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 0 I Specification Sections,
More informationSection "Rough Carpentry" for wood blocking for anchoring laboratory casework.
SECTION 1235519 - PART 1 - GENERAL 1 RELATED DOCUMENTS Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this
More informationADDENDUM NO. 1 THOROUGHBRED ROOM RENOVATION PHASE II DINING AREA MURRAY STATE UNIVERSITY, MURRAY, KY PROJECT #
ADDENDUM NO. 1 THOROUGHBRED ROOM RENOVATION PHASE II DINING AREA MURRAY STATE UNIVERSITY, MURRAY, KY PROJECT #13-046 10-23-2013 Bidders shall acknowledge receipt of this Addendum on the Bid Form, in the
More informationKenai Courthouse Expansion 2007 Section 06100
Kenai Courthouse Expansion 2007 Section 06100 Rough Carpentry SECTION 06100 - ROUGH CARPENTRY PART 1 GENERAL 1.01 SECTION INCLUDES A. Structural wall framing. B. Preservative treated wood materials. C.
More informationPlastic Laminate Casework
Plastic Laminate Casework Casework Contents Cover Letter... 3 Specifications... 4-13 Cabinet Construction... 14-27 Hardware... 28-38 Base Cabinets... 29-63 Tall Cabinets... 64-88 Wall Cabinets... 89-116
More informationLumicor CSI Specification Guide Open Format Section Solid Polymer Fabrication
Lumicor CSI Specification Guide Open Format Section 06650 Solid Polymer Fabrication I. GENERAL 1.01 DESCRIPTION A. Work described in this section: 1. Wall Partitions 2. Lighting 3. Table tops 4. Bar tops
More informationProduct Guide Specification
VT Industries, Inc. 1000 Industrial Park PO Box 490 Holstein, Iowa 51025 Toll Free (800) 827-1615 Phone (712) 368-4381 Fax (712) 368-4111 Website www.vtindustries.com E-mail info@vtindustries.com Product
More informationTECHNICAL STANDARDS SECTION
TECHNICAL STANDARDS SECTION 06 20 00 FINISH CARPENTRY JULY, 2016 PAGE 1 OF 4 This document contains standards that are the minimum requirements for BCIT construction projects. The information in the document
More informationSolid Surface Countertops
USE THIS SECTION FOR COUNTERTOPS. USE SECTION 06 61 16 FOR OTHER SOLID SURFACING APPLICATIONS INCLUDING WALL CLADDING AND MISCELLANEOUS FABRICATIONS. GENERAL NOTES TO SPECIFIER: THIS SPECIFICATION SECTION
More information