WALL INSTALLATION INSTRUCTIONS

Transcription

1 WALL STALLAT STRUCTS TE: TE JUCT BXES MUST BE SLDLY FXED T TE CEL AD ATTACED T TE STRUCTURE SDE TE CEL BEFRE RCEED T TE STALLAT. ART LST A Junction box (by others) J Quick-wire connectors B Main power feed cable (by others) Aligner C Drywall anchor (by others) L Joiner bracket D Mounting bracket M Reflector E Fixture wires Lamps (by others) F Wire nuts ptics Wall bracket screw Screws Fixture 1 Fixture 2 SDE VEW 2x4 J-box mounted to stud for mounting points please consult shop drawing lease consult Shop Drawings for final mounting points and dimensions. SECT VEW 2 1 /4 31 / / /8 T5 / T5 LAM FXTURE LETS FXTURE LET T5 / T5 2 1 /4 21 / /16 T8 LAM FXTURE LET T8 4' FXTURE 47 5 /16" 49" 8' FXTURE 93 5 /8" 97" 12' FXTURE /16" 145" 3 5 /8 A Refer to Shop Drawing C 1 Ensure that the power to the fixture s circuit is turned off. Locate the mounting points for the fixture on the wall. Make holes and use drywall anchors (C) if any of the holes do not line up with a structural stud. Locate position of the junction box (A) on the wall. C B F E back mounting bracket side view 2 Fasten back mounting brackets () to the wall. FLE AME:BEAM.2.WALL.indd September 17, AXS WAR: 3 Make electrical connections between fixture wires (E) and wall power cable (B) using wire nuts (F). RS F FRE AD ELECTRCAL SC. FXTURE MUST BE STALLED BY A QUALFED ELECTRCA LY ACCRDACE WT ATAL, LCAL BULD AD ELECTRCAL CDES. DSCECT WER AT ELECTRCAL AEL BEFRE SERVC. 4 Mount fixture () to the wall by fastening the fixture bracket () into the wall bracket () and secure with suppllied wall bracket screws (). age: 1 / 5 roduct design and development is an ongoing process at 2010 Axis Lighting nc.

2 WALL - ED-T-ED LAM STALLAT STRUCTS 5 CTUS RW: f row installation is required, remove lens () and lamps () if installed in the fixtures () (). Follow steps 1 to 4 for the first fixture (). Locate and install back mounting brackets () for next fixture () in the row. 6 Remove optics and lamps (if installed) from fixtures. Make sure the screws () for the aligner () are well in place in the first fixture (). J area for aligner 7 Make wire connection beteween both fixtures () () using the quick-wire connectors (J) provided. Slide fixture 2 () in place using the aligner () in the allocated area. 8 Mount fixture () to the wall by fastening the fixture bracket () into the wall bracket () and secure with suppllied screws (). ower to the fixtures () () can now be turned on. FLE AME:BEAM.2.WALL.indd September 17, AXS WAR: RS F FRE AD ELECTRCAL SC. FXTURE MUST BE STALLED BY A QUALFED ELECTRCA LY ACCRDACE WT ATAL, LCAL BULD AD ELECTRCAL CDES. DSCECT WER AT ELECTRCAL AEL BEFRE SERVC. age: 2 / 5 roduct design and development is an ongoing process at 2010 Axis Lighting nc.

3 WALL - ED-T-ED LAM STALLAT STRUCTS 9 Secure the aligner to the second fixture () using supplied screw (). L 10 Secure the joiner brackets (L) to each other using supplied screws (). 11 nstall the lamps () and optics () in the fixtures. FLE AME:BEAM.2.WALL.indd September 17, AXS WAR: RS F FRE AD ELECTRCAL SC. FXTURE MUST BE STALLED BY A QUALFED ELECTRCA LY ACCRDACE WT ATAL, LCAL BULD AD ELECTRCAL CDES. DSCECT WER AT ELECTRCAL AEL BEFRE SERVC. age: 3 / 5 roduct design and development is an ongoing process at 2010 Axis Lighting nc.

4 WALL - STAERED LAM STALLAT STRUCTS 5 CTUS RW: f row installation is required, remove lens () and lamps () if installed in the fixtures () (). Follow steps 1 to 4 for the first fixture (). Locate and install back mounting brackets () for next fixture () in the row. 6 Remove optics and lamps (if installed) from fixtures. Make sure the screws () for the aligner () are well in place in the first fixture (). J area for aligner M 7 Unscrew the reflector (M) for fixture 2 () by unscrewing the screws () on both sides of the fixture. 8 Make wire connection beteween both fixtures () () using the quick-wire connectors (J) provided. Slide fixture 2 () in place using the aligner () in the allocated area. FLE AME:BEAM.2.WALL.indd September 17, AXS WAR: RS F FRE AD ELECTRCAL SC. FXTURE MUST BE STALLED BY A QUALFED ELECTRCA LY ACCRDACE WT ATAL, LCAL BULD AD ELECTRCAL CDES. DSCECT WER AT ELECTRCAL AEL BEFRE SERVC. age: 4 / 5 roduct design and development is an ongoing process at 2010 Axis Lighting nc.

5 WALL - STAERED LAM STALLAT STRUCTS 9 Mount fixture () to the wall by fastening the fixture bracket () into the wall bracket () and secure with suppllied screws (). ower to the fixtures () () can now be turned on. 10 Secure the aligner to the second fixture () using supplied screw (). M 11 Screw the reflector (M) back in place in fixture 2 () by screwing the screws () on both sides of the fixture. 12 nstall the lamps () and optics () in the fixtures. FLE AME:BEAM.2.WALL.indd September 17, AXS WAR: RS F FRE AD ELECTRCAL SC. FXTURE MUST BE STALLED BY A QUALFED ELECTRCA LY ACCRDACE WT ATAL, LCAL BULD AD ELECTRCAL CDES. DSCECT WER AT ELECTRCAL AEL BEFRE SERVC. age: 5 / 5 roduct design and development is an ongoing process at 2010 Axis Lighting nc.