Work Item Status by Mode, O/C/P Report

Transcription

1 Work Item Status by Mode, O/C/P Report 01-Apr-11 Subject Cat: Coating Additives Literature references on the measurement of water retention of paper coatings Document #: TIP (wd) Margaret K. Joyce, Western Michigan University Awaiting closing form & draft from TGC 2/6/1998 3/2/1999 8/20/1999 Date Initiated: 2/6/1998 Est. Completed: 12/30/1997 CA Opened to reinstate withdrawn TIP QSMC requests action by October 1, 1999, or possible withdrawal Appeared on TIP report to QSMC in error, TIP was withdrawn in 1997; this is to reinstate 1

2 Subject Cat: Process Control & Quality Some questions and answers on gel temperatures and on the gel temperature test for corrugating adhesives John V. Kohl, Harper/Love Adhesives Corp. 2/2/2011 and WGC assigned Document #: TIP Date Initiated: 2/2/2011 Est. Completed: 2

3 Subject Cat: Production Subject Category Multiple-out rotary die cut stacking Document #: TIP /1/2011 and WGC assigned Date Initiated: 3/1/2011 Est. Completed: 3/1/2012 3

4 Subject Cat: Flexo Printing and Graphics Guideline for direct contact printing bar code symbols on corrugated Document #: TIP David A. Carlson, Carlson Consulting 1/5/2009 4/1/2010 2/28/2011 Notice to WGC that TIP is due WGC indicates that this will be completed by end of 2012 Date Initiated: 1/5/2009 Est. Completed: 1/5/2010 4

5 Subject Cat: Corrosion & Materials Eng Paper machine reel-spool journals: guidelines for crack testing and repair or replacement [TITLE CHANGE] David C. Bennett, 8/1/2008 4/1/ /18/ /2/2010 3/29/2011 Notice to WGC that TIP is due Second noitice to WGC Reassigned WGC to Nancy Hoffman Received final from new WGC Dave Bennett; title changed Document #: TIP Date Initiated: 8/1/2008 Est. Completed: 8/1/ Guidelines for nondestructive examination of suction roll shells Document #: TIP Craig Reid, Bacon Donaldson Consulting 11/30/2009 1/5/2011 2/1/2011 Reminder set to WGC Second reminder sent to WGC Note to committee chair Date Initiated: 11/30/2009 Est. Completed: 11/30/ Guidelines for welding and inspection of stainless alloy piping Document #: TIP John M. Grocki, Advantage Resources 7/1/2010 ; WGC assigned Date Initiated: 7/1/2010 Est. Completed: 7/1/ Gunned inorganic linings for corrosion protection in alkaline liquors and brown stock service to 200 C David C. Bennett, 11/4/2010 Draft submitted and Document #: TIP NEW Date Initiated: 11/4/2010 Est. Completed: 11/4/2011 5

6 Subject Cat: Water Removal Index of suppliers for press section monitoring Document #: TIP Gary W. Nyman, International Paper Due to complete 12/31/10 -- Resource Information 5/10/2010 ; WGC assigned Date Initiated: 5/10/2010 Est. Completed: 12/31/ Headbox approach piping guidelines Document #: TIP Richard A. Reese, Dick Reese and Associates Inc. 7/2/2010 and WGC assigned Date Initiated: 7/2/2010 Est. Completed: 7/2/ Paper machine clothing performance analysis Document #: TIP John A. Neun, Albany International Date Initiated: Est. Completed: 12/1/ Document #: TIP John A. Neun, Albany International Date Initiated: Est. Completed: 12/1/ Press section economic evaluation Document #: TIP John A. Neun, Albany International Date Initiated: Est. Completed: 12/1/ Performance evaluation techniques for paper machine vacuum systems Document #: TIP Richard A. Reese, Dick Reese and Associates Inc. Date Initiated: Est. Completed: 12/2/2011 6

7 Subject Cat: Water Removal Press fabric dewatering and conditioning - suction box (Uhle box) design and vacuum requirements Richard A. Reese, Dick Reese and Associates Inc. Document #: TIP Date Initiated: Est. Completed: 12/1/ Steam shower applications in the forming and press section Document #: TIP Philip H. Wells, Wells Enterprises Inc. 12/2/2010 Date Initiated: 12/2/2010 Est. Completed: 12/2/ Paper machine performance guidelines Document #: TIP Richard A. Reese, Dick Reese and Associates Inc. 1/5/2011 and WGC assigned Date Initiated: 1/5/2011 Est. Completed: 1/5/ Water permeability of press fabrics Document #: TIP Ivan I. Pikulik, Ivan Pikulik Consulting 1/6/2011 and WGC assigned Date Initiated: Est. Completed: 1/6/2012 7

8 Subject Cat: Fluid Mechanics Weirs and flumes Document #: TIP Alfred C. Li, USG Corporation 4/1/2009 4/1/2010 ; WGC assigned Notice to WGC that TIP is due Date Initiated: 4/1/2009 Est. Completed: 4/1/2010 8

9 Subject Cat: Steam & Power/Energy Mgmt Water quality and monitoring requirements for paper mill boilers operating on high purity feedwater James N. Graham, 4/1/2009 4/1/ /8/2010 ; WGC assigned Notice to WGC that TIP is due Changed WGC Document #: TIP Date Initiated: 4/1/2009 Est. Completed: 4/1/ Water quality guidelines and monitoring requirements for paper mill boilers operating with softened makeup water James N. Graham, 7/1/ /12/ /1/2010 ; WGC assigned New WGC assigned Notice sent re overdue TIP to WGC Document #: TIP Date Initiated: 7/1/2009 Est. Completed: 7/1/2010 9

10 Subject Cat: Maintenance & Mill Engineering Maintenance of covered rolls Document #: TIP (wd) Paul McCarten, American Roller Company 11/2/2009 Date Initiated: 11/2/2009 Est. Completed: 11/2/ Roll crown specifications and definitions Document #: TIP (wd) 11/2/2009 Date Initiated: 11/2/2009 Est. Completed: 11/2/ Measuring the hardness of rubber-covered rolls Document #: TIP Paul McCarten, American Roller Company 11/2/2009 1/4/2011 Reminder set to WGC Progress report received from WGC Date Initiated: 11/2/2009 Est. Completed: 11/2/

11 Subject Cat: Papermakers Subject Category Catalog of stock prep pilot plants Document #: TIP NEW William V. Stevens, 1/4/2011 Date Initiated: 1/4/2011 Est. Completed: 1/4/ Paper machine vacuum selection factors (fourdrinier type machines only) Document #: TIP Douglas F. Sweet, P.E., Doug Sweet & Associates 1/5/2011 and WGC assigned Date Initiated: Est. Completed: 1/5/

12 Subject Cat: Winding Subject Category Method for determining length and other properties in rolls of various diameters and basis weights J. D. Pfeiffer, 8/4/ /1/2010 ; WGC assigned Notice sent re overdue TIP to WGC; response received; wil lhave by 11/1/10 Document #: TIP Date Initiated: 8/4/2009 Est. Completed: 8/4/

13 Subject Cat: Electrical Engineering Cmte Recommended electrical wiring practice for automated control and regulaing systems Peter H. Werner, P.E., Rockwell Automation 2/6/1998 3/12/1998 CA Opened to reinstate withdrawn TIP Awaiting draft to recreate TIP & closing form Document #: TIP (wd) Date Initiated: 2/6/1998 Est. Completed: 4/30/ Selection of chipper drives Document #: TIP (wd) William S. Fuller, FRM Consulting 2/6/1998 3/12/1998 3/10/2005 3/11/2005 4/15/2005 Date Initiated: 2/6/1998 Est. Completed: 4/30/1998 CA Opened to reinstate withdrawn TIP Awaiting new draft to recreate TIP & closing form WGC no longer TAPPI member; sent to recruit new volunteer Jurgen Kleinau offered to be WGC; Fiber Raw Mat. Sup. Cmte to work on it also Changed WGC to Bill Fuller Refiner drive motors torque and thrust requirements Document #: TIP (wd) Jonathan C. Kerr, Miami University 2/6/1998 3/12/1998 3/10/2005 CA Opened to reinstate withdrawn TIP Awaiting draft to recreate TIP & closing form WGC no longer a TAPPI member; reassigned to Jon Kerr Date Initiated: 2/6/1998 Est. Completed: 4/30/