To import custom AD attribute we have to perform the following steps:
|
|
- Garey Hubbard
- 6 years ago
- Views:
Transcription
1 To import custom AD attribute we have to perform the following steps: Create New Attribute in AD with property. Create the New User profile Property in the User Profile Service. Create a matching property in the Metaverse Designer. Map the Custom Property in the ADMA. Refresh Schema for SPMA. Map the Custom Property in the SPMA. Run Full Sync. If a custom attribute is created in Active Directory, it cannot be removed. Installation of Active Directory Schema Snap-In Active Directory Schema is an administrative tool that can be used for Active Directory Schema updates and changes. To install it, you need to run regsvr32 schmmgmt.dll command using an elevated prompt (Using Run as administrator option). Once Active Directory Schema administrative tool is installed, it will be available on MMC.
2 Creation of a new Active Directory Attribute In the Active Directory Schema administrative tool, do a right-click on Attributes and then select Create Attribute. Click on Continue (The warning that is displayed is to inform that the creation of a new Active Directory attribute is not a reversible operation and that it cannot be removed)
3 Populate the following information: o Common Name o LDAP Display Name o Unique X500 Object ID 4c9be66a o Syntax ( o Description (Optional) o Minimum (Optional) o Maximum (Optional) o Multi-Valued (Enable it only if you would like to have a multi-valued attribute) For Unique X500 Run the PowerShell script from TechNet which will give you ID.
4 On Active Directory Schema administrative tool, go to Classes, select the class to update then go to its properties: In our case we are selecting Person class and then select Properties Navigate to Attributes tab and select Add. Select newly created attribute and click OK.
5 Check if the attribute is populated in the Attributes list as below. Click Apply and OK.
6 Second Create New User Property in User Profile. Navigate to User Profile and select Manage User Properties under People Section. Select New Property. Fill the Property Settings as per your requirement.
7
8 Create a matching property in the Metaverse Open Service Manager Select Metaverse Designer Select Person and click on Add Attribute.
9 Create the Mapping in the ADMA Select ADMA and click on Properties.
10 Select Show All and search for your newly created Attribute in Metaverse. Create the Mapping in the ADMA Select ADMA and click on Properties. Select Configure Attribute Flow. Data source object type: User Mapping Type: Direct Metaverse Object Type: Person Data Source Attribute: Team Flow Direction: Import Metaverse attribute: Team Once everything is selected Click on New.
11 You will see the attribute in the page as below screenshot Refresh Schema for SPMA Select SPMA and click Refresh Schema
12 Select OK Enter the SharePoint Credentials and click OK
13 The schema will get refresh. You can see the below highlighted line. Click Close. Mapping the SPMA attribute. Open SPMA and select properties. Click on Select Attributes. Select Show All And select the SP attribute which we created in SharePoint User Profile.
14 Select SPMA and select Properties. Click on Configure Attribute Flow Data source object type: User Mapping Type: Direct Metaverse Object Type: Person Data Source Attribute: SP-Team Flow Direction: Export (Select Allow Nulls as per your requirement) Metaverse attribute: Team Once everything is selected Click on New.
15 Now run the Full SharePoint Sync using PowerShell. Once completed check the SharePoint User Profile Properties for the users. Hope this guide help you to create custom User profile properties in SharePoint and AD and map them accordingly.
Stream Design: From GEOPAK to HEC-Ras
10 Stream Design: From GEOPAK to HEC-Ras OBJECTIVES Provide you with a general understanding of GEOPAK Cross Section Reports and their capability to generate geometric information for the HecRas program.
More informationVectorworks Essentials
by Jonathan Pickup fourth edition written with version 2012 Vectorworks Essentials Tutorial Manual Contents 0.0 Introduction... iii 0.1 How to Use this Manual... iv 0.2 What s in This Manual... v 0.3 New
More informationIn this tutorial you will use Photo Story 3, a free software program from Microsoft, to create digital stories using text, graphics and music.
In this tutorial you will use Photo Story 3, a free software program from Microsoft, to create digital stories using text, graphics and music. What you will learn: o System Requirements and Recommendations
More informationSubdivision Cross Sections and Quantities
NOTES Module 11 Subdivision Cross Sections and Quantities Quantity calculation and cross section generation are required elements of subdivision design projects. After the design is completed and approved
More informationUser Guide US AUS Avontus Software Corporation. All Rights Reserved
User Guide Scaffold Designer is a simple but powerful scaffold drawing tool that allows the design of scaffold structures of any complexity and generates a bill of materials automatically. This guide covers
More informationAS How to Use Dynamo to Visibly Show Navisworks Clashes into Revit
AS125109 How to Use Dynamo to Visibly Show Navisworks Clashes into Revit Felix Tan Stantec Ryan Wells Stantec Learning Objectives Learn how to simplify a coordination workflow between Navisworks and Revit
More informationSheet Metal Punch ifeatures
Lesson 5 Sheet Metal Punch ifeatures Overview This lesson describes punch ifeatures and their use in sheet metal parts. You use punch ifeatures to simplify the creation of common and specialty cut and
More informationPaperCut PaperCut Payment Gateway Module - Payment Gateway Module - NuVision Quick Start Guide
PaperCut PaperCut Payment Gateway Module - Payment Gateway Module - NuVision Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing,
More informationStep It Up a Rung from AutoCAD Designs to AutoCAD Electrical
Step It Up a Rung from AutoCAD Designs to AutoCAD Electrical Todd Schmoock Synergis Technologies MA4762-L: AutoCAD Electrical has proven to be easy for creating electrical controls system designs. It has
More informationBy now you should already have downloaded and installed Metatrader 4. If not, go to the previous episodes of this course.
What would you think is necessary to print data like your Account Balance or your Account Equity, your Trading profit or your Brokers spread directly on the chart on your computer screen? When I started
More informationSheets Happen! Using the Sheet Set Manager
Sheets Happen! Using the Sheet Set Manager Westwood Professional Services June 2007 Using AutoCAD s Sheet Set Manager Introduction The Sheet Set Manager organizes, displays, and manages sheet sets, a named
More informationWire Terms and Features
The Wire Transfer service provides secure wire transfer capabilities that allow: Creation of a variety of wire templates that simplifies the data entry process Enter wire instructions via wire templates
More informationOpen To Buy 08/26/2016. User Reference Manual
Open To Buy Open To Buy 08/26/2016 User Reference Manual Copyright 2007-2016 by Celerant Technology Corp. All rights reserved worldwide. This manual, as well as the software described in it, is furnished
More informationCCG Referral App - Northern Ireland
CCG Referral App - Northern Ireland For practices in Northern Ireland who use the Referral Screen supplied by the CCG, the way you access the screen has been updated. A Vision App has been created to enable
More informationA Practical Guide to Carlson Survey 2014
A Practical Guide to Carlson Survey 2014 Level 1 Rick Ellis A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2014 All rights reserved. No part of this publication may be reproduced
More informationCreate all plan and profile sheets in the current drawing. Create all plan and profile sheets in individual drawings.
NOTES Module 18 Roadway Plan Production In this module, you learn how to work with Roadway Plan Production tools in AutoCAD Civil 3D. The Plan Production tools are used to automate the generation of plan
More informationEG1003 Help and How To s: Revit Tutorial
EG1003 Help and How To s: Revit Tutorial Completion of this tutorial is required for Milestone 1. Include screenshots of it in your Milestone 1 presentation. Downloading Revit: Before beginning the tutorial,
More informationOpen To Buy (OTB) User Manual
Open To Buy (OTB) User Manual Open to Buy Purpose... 3 Typical User and Workflow... 4 Open to Buy Definitions and Calculations... 5 Field Definitions... 5 Automatically Calculated OTB Fields... 5 Syntax
More informationProjects Connector User Guide
Version 4.3 11/2/2017 Copyright 2013, 2017, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on
More informationFOCUS ON REAL DESIGN AUTOMATE THE REST CUSTOMTOOLS BATCH CONVERTING YOUR SOLIDWORKS FILES
FOCUS ON REAL DESIGN AUTOMATE THE REST CUSTOMTOOLS BATCH CONVERTING YOUR SOLIDWORKS FILES Table of Contents BATCH CONVERTING YOUR SOLIDWORKS DOCUMENTS... 3 Introduction... 3 What does it do?... 3 How does
More informationMETAVERSE WALLET USER MANUAL
METAVERSE WALLET USER MANUAL V1.4 applies to version 0.7.1 of the Metaverse Wallet 2017-10-18 The Metaverse operation team CONTENTS 1. Preface... 3 1.1 Purpose... 3 1.2 Background... 3 2. Wallet Overview...
More informationKodiak Corporate Administration Tool
AT&T Business Mobility Kodiak Corporate Administration Tool User Guide Release 8.3 Table of Contents Introduction and Key Features 2 Getting Started 2 Navigate the Corporate Administration Tool 2 Manage
More informationCreating a Sketchbook in Sketchbook Designer based on a photo and Reusing it in AutoCAD
Autodesk Design Suite 2012 Autodesk SketchBook Designer 2012 Tip Guides Creating a Sketchbook in Sketchbook Designer based on a photo and Reusing it in AutoCAD In this section you will learn the following:
More informationCreating Interim & Final Invoices - Basic Steps
Creating Invoices in your fp. system is a straightforward and flexible. Please follow the steps in this article, to learn the basics of building interim or final invoices. Refer to other articles to learn
More informationModule 10. Assemblies and Corridors. Objectives
NOTES Module 10 Assemblies and Corridors In this module, you learn to work with assemblies and corridors in AutoCAD Civil 3D. Corridor models are used to represent road designs in Civil 3D. An assembly
More informationBatch Processing Converting images in a folder to JPEG
Batch Processing Converting images in a folder to JPEG Request I would like to convert multiple RAW images (NEF files) to JPEG images all at once Response You can use a Batch Process to convert all RAW
More informationPRINTING ON YOUR IPAD
PRINTING ON YOUR IPAD TABLE OF CONTENTS I don t have Papercut on my ipad... 1 I can t see any printers when trying to print... 2 The Papercut app wants me to sign in... 3 Can I print double sided?... 4
More informationPaperCut PaperCut Payment Gateway Module - Heartland Quick Start Guide
PaperCut PaperCut Payment Gateway Module - Heartland Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing, setting up and testing
More informationthe Buzzsaw file hierarchy, providing bid administrators the ability to easily view and manage all bid-related project documents.
What s New: Summary Viewing Enhancements with new PDF and drawing comparison support (Buzzsaw Standard and Buzzsaw Professional): Buzzsaw provides design review and redlining for the latest versions of
More informationPractice Workbook. Create 2D Plans from 3D Geometry in a Civil Workflow
Practice Workbook This workbook is designed for use in Live instructor-led training and for OnDemand selfstudy. The explanations and demonstrations are provided by the instructor in the classroom, or in
More informationLogging into the My.Assumption Portal
Logging into the My.Assumption Portal There are two ways to get into the My.Assumption portal; you can choose the way that best works for you. 1. Type https://my.assumption.edu in any Web browser address
More informationJuly 12, so it includes. below. 4. Import File). You. will need to. Page 1
July 12, 2012 How to trim the database you send to SGGEE using Legacy genealogy software so it includes only the Germans in your database 1. Print your pedigree chart from your existing genealogy program.
More informationMULTIPLE ORGANISATION ( MULTI ORG )
MULTIPLE ORGANISATION ( MULTI ORG ) Oracle Financials R12 www.erpstuff.com INDEX MULTI ORGANISATION Introduction Benefits Multi Org Structure in Release 11 and Release 12 Release 11 Versus Release 12 Important
More informationPaperCut PaperCut Payment Gateway Module - CardSmith Quick Start Guide
PaperCut PaperCut Payment Gateway Module - CardSmith Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing, setting up and testing
More informationA Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2015 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A Cadapult Press Publication Copyright Copyright Cadapult Press, Inc. 2015 All rights reserved. No
More informationAlibre Design Tutorial - Simple Extrude Step-Pyramid-1
Alibre Design Tutorial - Simple Extrude Step-Pyramid-1 Part Tutorial Exercise 4: Step-Pyramid-1 [text version] In this Exercise, We will set System Parameters first. Then, in sketch mode, outline the Step
More informationCHAPTER 15. Cross Section Sheets. None, except batch processing of an input file.
CHAPTER 15 Cross Section Sheets 15.1 Introduction Objectives Project Manager Menu Bar Application Learn the procedures for laying out cross section sheets. Cross Section Sheets None, except batch processing
More informationChapter 16: Batch Scanning
Chapter 16: Batch Scanning The Batch Scanning module allows users to scan and upload various versions of voter registration forms as a batch into the system. Once they are scanned, documents are available
More informationGeoCue Group, Inc Madison Blvd. Suite 202 Madison, AL Frame CuePac User Guide 2017.
GeoCue Group, Inc. 9668 Madison Blvd. Suite 202 Madison, AL 35758 1-256-461-8289 www.geocue.com Frame CuePac User Guide 2017.1 5 May 2017 This document contains proprietary information that cannot be released
More informationFundamentals of ModelBuilder
Fundamentals of ModelBuilder Agenda An Overview of Geoprocessing Framework Introduction to ModelBuilder Basics of ArcToolbox Using ModelBuilder Documenting Models Sharing Models with Others Q & A Geoprocessing
More informationYou should see the following screen when you first login to Student E-Service
You should see the following screen when you first login to Student E-Service Check your status at the top of the screen. It should read Ready to Register Online You will find useful information in the
More informationDocuSign for Sugar 7 v1.0. Overview. Quick Start Guide. Published December 5, 2013
Quick Start Guide DocuSign for Sugar 7 v1.0 Published December 5, 2013 Overview This guide provides information on installing and signing documents with DocuSign for Sugar7. The Release Notes for DocuSign
More informationPaperCut PaperCut Payment Gateway Module - Blackboard Quick Start Guide
PaperCut PaperCut Payment Gateway Module - Blackboard Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing, setting up and
More informationPaperCut PaperCut Payment Gateway Module - CBORD Data Xchange Quick Start Guide
PaperCut PaperCut Payment Gateway Module - CBORD Data Xchange Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing, setting
More informationMODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS INSTRUCTIONS AND TUTORIALS WHAT S INSIDE INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 1 OVERVIEW 1 SETTING UP LAYERS AND CLASSES 1 CREATING OBJECT
More informationStratigraphy Modeling Boreholes and Cross. Become familiar with boreholes and borehole cross sections in GMS
v. 10.3 GMS 10.3 Tutorial Stratigraphy Modeling Boreholes and Cross Sections Become familiar with boreholes and borehole cross sections in GMS Objectives Learn how to import borehole data, construct a
More informationCorridors. To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment: (1) Alignments > Create
More informationRelease Notes - Fixes in Tekla Structures 2016i SP1
Release Notes - Fixes in Tekla Structures 2016i SP1 is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups instead of tapered groups., the
More informationAssignment 5 CAD Mechanical Part 1
Assignment 5 CAD Mechanical Part 1 Objectives In this assignment you will apply polyline, offset, copy, move, and rotated dimension commands, as well as skills learned in earlier assignments. Getting Started
More informationPhysical Inventory System User Manual. Version 19
Physical Inventory System User Manual Version 19 0 Physical Inventory System User Manual 1 Table of Contents 1. Prepare for Physical Inventory... 2. Chapter 1: Starting Inventory... 2.1. CDK/ADP... 3.
More informationCensus Taker User Guide
Census Taker User Guide Now that you have downloaded and installed Census Taker 1.1.1 to your computer from http://www.forthecousins.com/censustaker, here is a look at how to use it. Before you start,
More informationGetting Started. Before You Begin, make sure you customized the following settings:
Getting Started Getting Started Before getting into the detailed instructions for using Generative Drafting, the following tutorial aims at giving you a feel of what you can do with the product. It provides
More informationACCU-GOLD QUICK START MANUAL
ACCU-GOLD Now includes support for the light sensor (AGLS) and Accu Gold+ digitizers and sensors (AGDM+, AGMS DM+) Nomenclature AGDM Accu-Gold Digitizer Module RGDM Rapid-Gold Digitizer Module RGDM-MA
More information1 ELECTRONIC REVIEW PROCESS - GUIDELINES FOR DESIGN TEAMS.
Los Angeles Unified School District FACILITIES SERVICES DIVISION 1 ELECTRONIC REVIEW PROCESS - GUIDELINES FOR DESIGN TEAMS. 1.0 Purpose For issuing a PDF format Design Submittal to LAUSD for review and/or
More informationStratigraphy Modeling Boreholes and Cross Sections
GMS TUTORIALS Stratigraphy Modeling Boreholes and Cross Sections The Borehole module of GMS can be used to visualize boreholes created from drilling logs. Also three-dimensional cross sections between
More informationAnsible Tower Quick Setup Guide
Ansible Tower Quick Setup Guide Release Ansible Tower 3.1.3 Red Hat, Inc. Feb 27, 2018 CONTENTS 1 Quick Start 2 2 Login as a Superuser 3 3 Import a License 5 4 Examine the Tower Dashboard 7 5 The Settings
More informationTas Engineering Training Workbook 1
Tas Engineering Training Workbook 1 Tas 3D Modeller Tas Manager Your Tas Manager contains two main folders: a Tas folder and a Tas Data folder. See the directory-tree on the left-hand side above. If you
More informationPlanking Standards. Planking Profile Drawings
Planking Planking (or automatic straking) is for automatically dividing predefined areas, such as decks and bulkheads, into planks based on the parameters of available stock, then generating a BOM automatically.
More informationGPS Pathfinder Office Software or the GPS Analyst Extension for ESRI ArcGIS Software: Resolving the NAD 83 Datum Transformation Issue
Mapping & GIS Support Note 5 May 2005 GPS Pathfinder Office Software or the GPS Analyst Extension for ESRI ArcGIS Software: Resolving the NAD 83 Datum Transformation Issue Summary The current realizations
More informationGetting Started Guide
SOLIDWORKS Getting Started Guide SOLIDWORKS Electrical FIRST Robotics Edition Alexander Ouellet 1/2/2015 Table of Contents INTRODUCTION... 1 What is SOLIDWORKS Electrical?... Error! Bookmark not defined.
More informationHow do I apply for housing?
How do I apply for housing? Step 1 Copy this link to your browser (http://residencelife.cau.edu/starrezportal) be sure that www does not populate in the address. The Housing Portal will open during registration.
More informationWatershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS
Slides by Wheaton et al. (2009-2014) are licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License Watershed Sciences 4930 & 6920 GEOGRAPHIC INFORMATION SYSTEMS INTRODUCTION
More informationDocuSign Signature Appliance SharePoint Connector Guide Version 8.2
DocuSign Signature Appliance SharePoint Connector Guide Version 8.2 DocuSign Signature Appliance SharePoint Connector Guide 1 Copyright 2003-2017 DocuSign, Inc. All rights reserved. For information about
More informationCreating Family Trees in The GIMP Photo Editor
Creating Family Trees in The GIMP Photo Editor A family tree is a great way to track the generational progression of your Sims, whether you re playing a legacy challenge, doing a breeding experiment, or
More informationOnce your church has set up the Church App for Seraphim, you can now download the app onto your mobile device from the the App Store or Google Play.
Once your church has set up the Church App for Seraphim, you can now download the app onto your mobile device from the the App Store or Google Play. Once the app has completed downloading, open the app.
More informationUser Documentation Ship-To Address Management. Status: Version: 1.0
User Documentation Ship-To Address Management Status: 10.2016 Version: 1.0 Functional Description 2 Index Ship-To Address Management... 3 Functional Description... 3 Background... 3 Prerequisites for Usage...
More informationCorridors To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly.
Corridors 2018-2019 To create a corridor you must have an alignment (baseline), a profile (existing or proposed), and an assembly. Alignments You have 2 choices in defining an alignment from scratch: (1)
More informationRed Hat Ansible Workshop. Lai Kok Foong, Kelvin
Red Hat Ansible Workshop Lai Kok Foong, Kelvin Objective What is Ansible? Ansible Architecture Installing Ansible Ansible configuration file Creating Inventory Running Ad Hoc Commands Creating a Simple
More informationPaperCut TouchNet upay Quick Start Guide
PaperCut TouchNet upay Quick Start Guide This guide is designed to supplement the Payment Gateway Module documentation and provides a guide to installing, setting up and testing the Payment Gateway Module
More informationTABLE OF CONTENTS INTRODUCTION...4
Starting Guide TABLE OF CONTENTS INTRODUCTION...4 Advance Steel... 4 Where to find information?... 5 INSTALLATION... 5 System requirements... 5 Starting the installation... 5 STARTING ADVANCE STEEL...
More informationMANAGING PERSON-LEVEL RELATIONSHIPS. Knowledge Base Article
MANAGING PERSON-LEVEL RELATIONSHIPS Knowledge Base Article Table of Contents Overview... 3 Managing Relationships within the Person Record... 3 Editing Relationships... 4 Adding Related Person... 5 Creating
More informationA Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner
A Practical Guide to Carlson Software Fundamentals 2018 Rick Ellis Douglas L. Aaberg, PLS Duke Gardner A CADapult Press Publication Copyright Copyright CADapult Press, Inc. 2017 All rights reserved. No
More informationProject Manager. White Paper. AutoCAD Electrical 2019
Page 1 of 6 Project Manager AutoCAD Electrical 2019 The Project Manager is split into two tabs with four primary parts as detailed below. The first tab is Projects and is split into three parts of Project
More informationSolidWize. Online SolidWorks Training. Lofts: Tea Pot
SolidWize Online SolidWorks Training Lofts: Tea Pot Step 1: Creating the Body Using inches as the unit, create the following sketch on the top plane. We will now add a plane above the top plane so that
More informationWHITE PAPER ONYX 11 Textile. Using ColorWays. onyxgfx.com
WHITE PAPER ONYX 11 Textile Using ColorWays Introduction Colorways is a new tool for ONYX 11 and Thrive 11 Textile editions. Colorways is part of the Patterns tools in Job Editor. This tool makes it easy
More informationpdfpost Tutorial pdfpost & ANSYS Workbench extension (v2) for starters.
pdfpost Tutorial pdfpost & ANSYS Workbench extension (v2) for starters. This tutorial shows how to convert ANSYS Mechanical simulation data to 3D PDF using pdfpost and ANSYS Mechanical ACT extension. Our
More informationWGS and IAI OBA User Guide
WGS and IAI OBA User Guide Date: June 14, 2011 Contents Your Outside Business Activity Form... 3 I. Filling Out Your OBA... 3 II. Submitting Your OBA... 6 III. Responding to Your OBA... 7 IV. Completeing
More informationCBCL Limited Sheet Set Manager Tutorial 2013 REV. 02. CBCL Design Management & Best CAD Practices. Our Vision
CBCL Limited Sheet Set Manager Tutorial CBCL Design Management & Best CAD Practices 2013 REV. 02 Our Vision To be the most respected and successful Atlantic Canada based employeeowned firm, delivering
More informationARC HYDRO GROUNDWATER TUTORIALS
ARC HYDRO GROUNDWATER TUTORIALS Subsurface Analyst Creating ArcMap cross sections from existing cross section images Arc Hydro Groundwater (AHGW) is a geodatabase design for representing groundwater datasets
More informationIntroduction to R Software Prof. Shalabh Department of Mathematics and Statistics Indian Institute of Technology, Kanpur
Introduction to R Software Prof. Shalabh Department of Mathematics and Statistics Indian Institute of Technology, Kanpur Lecture - 03 Command line, Data Editor and R Studio Welcome to the lecture on introduction
More informationIE11, Edge (current version), Chrome (current version), Firefox (current version)
Quick Start Guide DocuSign for SharePoint Online v3.4 Published: October 13, 2017 Overview DocuSign for SharePoint Online allows users to sign or send documents for signature from a SharePoint Online library.
More informationExisting and Design Profiles
NOTES Module 09 Existing and Design Profiles In this module, you learn how to work with profiles in AutoCAD Civil 3D. You create and modify profiles and profile views, edit profile geometry, and use styles
More informationAn Introduction to Geoprocessing
An Introduction to Geoprocessing 1 Geoprocessing What is Geoprocessing What are Geoprocessing Models 2 What is Geoprocessing? Geoprocessing is the processing of geographic information, one of the basic
More informationUsing Siemens NX 11 Software. The connecting rod
Using Siemens NX 11 Software The connecting rod Based on a Catia tutorial written by Loïc Stefanski. At the end of this manual, you should obtain the following part: 1 Introduction. Start NX 11 and open
More informationCOMPACONLINE CARD MANAGEMENT MANUAL
COMPACONLINE CARD MANAGEMENT MANUAL CompacOnline Card Management Version No: 1.0.1 Date: 20/04/2018 Document Control Document Information Document Details Current Revision Author(s) Authorised By CompacOnline
More informationMODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS
MODEL SETUP FOR RENOVATION PROJECTS: INSTRUCTIONS AND TUTORIALS TABLE OF CONTENTS INTRODUCTION 1 PART ONE LAYERS AND CLASSES FOR RENOVATION PROJECT 2 OVERVIEW 2 SETTING UP LAYERS AND CLASSES 2 CREATING
More informationGIS Module GMS 7.0 TUTORIALS. 1 Introduction. 1.1 Contents
GMS 7.0 TUTORIALS 1 Introduction The GIS module can be used to display data from a GIS database directly in GMS without having to convert that data to GMS data types. Native GMS data such as grids and
More informationZero Touch Provisioning of NIOS on Openstack using Ansible
DEPLOYMENT GUIDE Zero Touch Provisioning of NIOS on Openstack using Ansible NIOS version 8.3 Oct 2018 2018 Infoblox Inc. All rights reserved. Zero Touch Provisioning of NIOS on Openstack using Ansible
More informationLegacy FamilySearch Overview
Legacy FamilySearch Overview Legacy Family Tree is "Tree Share" Certified for FamilySearch Family Tree. This means you can now share your Legacy information with FamilySearch Family Tree and of course
More information1. Creating a derived CPM
Tutorial Creating a new derived CPM Software version: Asanti 3.0 Document version: March 28, 2019 This tutorial is based upon basic knowledge on CPM s, please consult the online tutorial Calibrated Printing
More informationThis guide provides information on installing, signing, and sending documents for signature with
Quick Start Guide DocuSign for Dynamics 365 CRM 5.2 Published: June 15, 2017 Overview This guide provides information on installing, signing, and sending documents for signature with DocuSign for Dynamics
More informationApplied Precast Concrete Detailing
Applied Precast Concrete Detailing Tekla Structures 11.0 August 30, 2005 Copyright 2005 Tekla Corporation Copyright 2005 Tekla Corporation Applied Precast Concrete Detailing i Copyright 2005 Tekla Corporation
More informationv. 8.0 GMS 8.0 Tutorial GIS Module Shapefile import, display, and conversion Prerequisite Tutorials None Time minutes
v. 8.0 GMS 8.0 Tutorial Shapefile import, display, and conversion Objectives Learn how to import and display shapefiles with and without ArcObjects. Convert the shapefiles to GMS feature objects. Prerequisite
More informationRelease Notes - Fixes in Tekla Structures 2016i PR1
Release Notes - Fixes in Tekla Structures 2016i PR1, you can now set the to either or. is modified., the ID of the connection plate is not changed anymore when the connection now uses normal rebar groups
More informationNEORSD. Cad Standards and Procedures Manual
NEORSD Cad Standards and Procedures Manual This Manual is being provided to you on loan from the NEOSRD and is the property of the NEOSRD. Periodic updates will be provided and you are responsible for
More informationEDUCATION GIS CONFERENCE Geoprocessing with ArcGIS Pro. Rudy Prosser GISP CTT+ Instructor, Esri
EDUCATION GIS CONFERENCE Geoprocessing with ArcGIS Pro Rudy Prosser GISP CTT+ Instructor, Esri Maintenance What is geoprocessing? Geoprocessing is - a framework and set of tools for processing geographic
More informationInstallation Instructions
Installation Instructions Important Notes: The latest version of Stencyl can be downloaded from: http://www.stencyl.com/download/ Available versions for Windows, Linux and Mac This guide is for Windows
More informationDownloading Imagery & LIDAR
Downloading Imagery & LIDAR 333 Earth Explorer The USGS is a great source for downloading many different GIS data products for the entire US and Canada and much of the world. Below are instructions for
More informationRecord As-Built Drawings for Capital Projects
Section 19.1 Record As-Built Drawings for Capital Projects Overview - Section 19.1 Internal Use: Full compliance where applicable Contractor Use: Full compliance where applicable The intention of this
More informationKISSsoft Tutorial: Tooth root optimization
KISSsoft AG - +41 55 254 20 50 Uetzikon 4 - +41 55 254 20 51 8634 Hombrechtikon - info@kisssoft.ag Switzerland - www.kisssoft.ag KISSsoft Tutorial: Tooth root optimization 1 Overview 1.1 Task KISSsoft
More information